Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 124 insertions, 0 deletions

diff --git a/tools/perf/Makefile b/tools/perf/Makefile
new file mode 100644
index 000000000..5b713837e
--- /dev/null
+++ b/tools/perf/Makefile
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# This is a simple wrapper Makefile that calls the main Makefile.perf
+# with a -j option to do parallel builds
+#
+# If you want to invoke the perf build in some non-standard way then
+# you can use the 'make -f Makefile.perf' method to invoke it.
+#
+
+#
+# Clear out the built-in rules GNU make defines by default (such as .o targets),
+# so that we pass through all targets to Makefile.perf:
+#
+.SUFFIXES:
+
+#
+# We don't want to pass along options like -j:
+#
+unexport MAKEFLAGS
+
+#
+# Do a parallel build with multiple jobs, based on the number of CPUs online
+# in this system: 'make -j8' on a 8-CPU system, etc.
+#
+# (To override it, run 'make JOBS=1' and similar.)
+#
+ifeq ($(JOBS),)
+  JOBS := $(shell (getconf _NPROCESSORS_ONLN || grep -E -c '^processor|^CPU[0-9]' /proc/cpuinfo) 2>/dev/null)
+  ifeq ($(JOBS),0)
+    JOBS := 1
+  endif
+endif
+
+#
+# Only pass canonical directory names as the output directory:
+#
+ifneq ($(O),)
+  FULL_O := $(shell cd $(PWD); readlink -f $(O) || echo $(O))
+endif
+
+#
+# Only accept the 'DEBUG' variable from the command line:
+#
+ifeq ("$(origin DEBUG)", "command line")
+  ifeq ($(DEBUG),)
+    override DEBUG = 0
+  else
+    SET_DEBUG = "DEBUG=$(DEBUG)"
+  endif
+else
+  override DEBUG = 0
+endif
+
+ifeq ($(JOBS),1)
+  BUILD_TYPE := sequential
+else
+  BUILD_TYPE := parallel
+endif
+
+define print_msg
+  @printf '  BUILD:   Doing '\''make \033[33m-j'$(JOBS)'\033[m'\'' $(BUILD_TYPE) build\n'
+endef
+
+define make
+  @$(MAKE) -f Makefile.perf --no-print-directory -j$(JOBS) O=$(FULL_O) $(SET_DEBUG) $@
+endef
+
+#
+# Needed if no target specified:
+# (Except for tags and TAGS targets. The reason is that the
+# Makefile does not treat tags/TAGS as targets but as files
+# and thus won't rebuilt them once they are in place.)
+#
+all tags TAGS:
+	$(print_msg)
+	$(make)
+
+ifdef MAKECMDGOALS
+has_clean := 0
+ifneq ($(filter clean,$(MAKECMDGOALS)),)
+  has_clean := 1
+endif # clean
+
+ifeq ($(has_clean),1)
+  rest := $(filter-out clean,$(MAKECMDGOALS))
+  ifneq ($(rest),)
+$(rest): clean
+  endif # rest
+endif # has_clean
+endif # MAKECMDGOALS
+
+#
+# Explicitly disable parallelism for the clean target.
+#
+clean:
+	$(make) -j1
+
+#
+# The build-test target is not really parallel, don't print the jobs info,
+# it also uses only the tests/make targets that don't pollute the source
+# repository, i.e. that uses O= or builds the tarpkg outside the source
+# repo directories.
+#
+# For a full test, use:
+#
+# make -C tools/perf -f tests/make
+#
+build-test:
+	@$(MAKE) SHUF=1 -f tests/make REUSE_FEATURES_DUMP=1 MK=Makefile SET_PARALLEL=1 --no-print-directory tarpkg make_static make_with_gtk2 out
+
+build-test-tarball:
+	@$(MAKE) -f tests/make REUSE_FEATURES_DUMP=1 MK=Makefile SET_PARALLEL=1 --no-print-directory out
+
+check-headers:
+	@./check-headers.sh
+
+#
+# All other targets get passed through:
+#
+%: FORCE
+	$(print_msg)
+	$(make)
+
+.PHONY: tags TAGS FORCE Makefile build-test build-test-tarball check-headers