From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- tools/perf/Makefile | 124 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 124 insertions(+) create mode 100644 tools/perf/Makefile (limited to 'tools/perf/Makefile') diff --git a/tools/perf/Makefile b/tools/perf/Makefile new file mode 100644 index 000000000..5b713837e --- /dev/null +++ b/tools/perf/Makefile @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# This is a simple wrapper Makefile that calls the main Makefile.perf +# with a -j option to do parallel builds +# +# If you want to invoke the perf build in some non-standard way then +# you can use the 'make -f Makefile.perf' method to invoke it. +# + +# +# Clear out the built-in rules GNU make defines by default (such as .o targets), +# so that we pass through all targets to Makefile.perf: +# +.SUFFIXES: + +# +# We don't want to pass along options like -j: +# +unexport MAKEFLAGS + +# +# Do a parallel build with multiple jobs, based on the number of CPUs online +# in this system: 'make -j8' on a 8-CPU system, etc. +# +# (To override it, run 'make JOBS=1' and similar.) +# +ifeq ($(JOBS),) + JOBS := $(shell (getconf _NPROCESSORS_ONLN || grep -E -c '^processor|^CPU[0-9]' /proc/cpuinfo) 2>/dev/null) + ifeq ($(JOBS),0) + JOBS := 1 + endif +endif + +# +# Only pass canonical directory names as the output directory: +# +ifneq ($(O),) + FULL_O := $(shell cd $(PWD); readlink -f $(O) || echo $(O)) +endif + +# +# Only accept the 'DEBUG' variable from the command line: +# +ifeq ("$(origin DEBUG)", "command line") + ifeq ($(DEBUG),) + override DEBUG = 0 + else + SET_DEBUG = "DEBUG=$(DEBUG)" + endif +else + override DEBUG = 0 +endif + +ifeq ($(JOBS),1) + BUILD_TYPE := sequential +else + BUILD_TYPE := parallel +endif + +define print_msg + @printf ' BUILD: Doing '\''make \033[33m-j'$(JOBS)'\033[m'\'' $(BUILD_TYPE) build\n' +endef + +define make + @$(MAKE) -f Makefile.perf --no-print-directory -j$(JOBS) O=$(FULL_O) $(SET_DEBUG) $@ +endef + +# +# Needed if no target specified: +# (Except for tags and TAGS targets. The reason is that the +# Makefile does not treat tags/TAGS as targets but as files +# and thus won't rebuilt them once they are in place.) +# +all tags TAGS: + $(print_msg) + $(make) + +ifdef MAKECMDGOALS +has_clean := 0 +ifneq ($(filter clean,$(MAKECMDGOALS)),) + has_clean := 1 +endif # clean + +ifeq ($(has_clean),1) + rest := $(filter-out clean,$(MAKECMDGOALS)) + ifneq ($(rest),) +$(rest): clean + endif # rest +endif # has_clean +endif # MAKECMDGOALS + +# +# Explicitly disable parallelism for the clean target. +# +clean: + $(make) -j1 + +# +# The build-test target is not really parallel, don't print the jobs info, +# it also uses only the tests/make targets that don't pollute the source +# repository, i.e. that uses O= or builds the tarpkg outside the source +# repo directories. +# +# For a full test, use: +# +# make -C tools/perf -f tests/make +# +build-test: + @$(MAKE) SHUF=1 -f tests/make REUSE_FEATURES_DUMP=1 MK=Makefile SET_PARALLEL=1 --no-print-directory tarpkg make_static make_with_gtk2 out + +build-test-tarball: + @$(MAKE) -f tests/make REUSE_FEATURES_DUMP=1 MK=Makefile SET_PARALLEL=1 --no-print-directory out + +check-headers: + @./check-headers.sh + +# +# All other targets get passed through: +# +%: FORCE + $(print_msg) + $(make) + +.PHONY: tags TAGS FORCE Makefile build-test build-test-tarball check-headers -- cgit v1.3.1