Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 310 insertions, 0 deletions

diff --git a/lib/crypto/Kconfig b/lib/crypto/Kconfig
new file mode 100644
index 000000000..56f308dd0
--- /dev/null
+++ b/lib/crypto/Kconfig
@@ -0,0 +1,310 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config CRYPTO_HASH_INFO
+	bool
+
+config CRYPTO_LIB_UTILS
+	tristate
+
+config CRYPTO_LIB_AES
+	tristate
+	# Select dependencies of modes that are part of libaes.
+	select CRYPTO_LIB_GF128HASH if CRYPTO_LIB_AES_GCM != n
+	select CRYPTO_LIB_UTILS
+
+config CRYPTO_LIB_AES_ARCH
+	bool
+	depends on CRYPTO_LIB_AES && !UML && !KMSAN
+	default y if ARM
+	default y if ARM64
+	default y if PPC && (SPE || (PPC64 && VSX))
+	default y if RISCV && 64BIT && TOOLCHAIN_HAS_VECTOR_CRYPTO && \
+		     RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS
+	default y if S390
+	default y if SPARC64
+	default y if X86
+
+config CRYPTO_LIB_AESCFB
+	tristate
+	select CRYPTO_LIB_AES
+	select CRYPTO_LIB_UTILS
+
+config CRYPTO_LIB_AES_CBC
+	tristate
+	select CRYPTO_LIB_AES
+	help
+	  The AES-CBC and AES-CBC-CTS library functions.
+
+config CRYPTO_LIB_AES_CBC_MACS
+	tristate
+	select CRYPTO_LIB_AES
+	help
+	  The AES-CMAC, AES-XCBC-MAC, and AES-CBC-MAC library functions.  Select
+	  this if your module uses any of the functions from
+	  <crypto/aes-cbc-macs.h>.
+
+config CRYPTO_LIB_AES_CCM
+	tristate
+	select CRYPTO_LIB_AES
+	select CRYPTO_LIB_AES_CBC_MACS
+	select CRYPTO_LIB_AES_CTR
+	help
+	  The AES-CCM library functions.
+
+config CRYPTO_LIB_AES_CTR
+	tristate
+	select CRYPTO_LIB_AES
+	help
+	  The AES-CTR and AES-XCTR library functions.
+
+config CRYPTO_LIB_AES_ECB
+	tristate
+	select CRYPTO_LIB_AES
+	help
+	  The AES-ECB library functions.
+
+config CRYPTO_LIB_AES_GCM
+	tristate
+	select CRYPTO_LIB_AES
+	select CRYPTO_LIB_AES_CTR
+	help
+	  The AES-GCM library functions.
+
+config CRYPTO_LIB_AES_XTS
+	tristate
+	select CRYPTO_LIB_AES
+	help
+	  The AES-XTS library functions.
+
+config CRYPTO_LIB_ARC4
+	tristate
+
+config CRYPTO_LIB_GF128MUL
+	tristate
+
+config CRYPTO_LIB_BLAKE2B
+	tristate
+	help
+	  The BLAKE2b library functions.  Select this if your module uses any of
+	  the functions from <crypto/blake2b.h>.
+
+config CRYPTO_LIB_BLAKE2B_ARCH
+	bool
+	depends on CRYPTO_LIB_BLAKE2B && !UML
+	default y if ARM && KERNEL_MODE_NEON
+
+# BLAKE2s support is always built-in, so there's no CRYPTO_LIB_BLAKE2S option.
+
+config CRYPTO_LIB_BLAKE2S_ARCH
+	bool
+	depends on !UML
+	default y if ARM
+	default y if X86_64
+
+config CRYPTO_LIB_CHACHA
+	tristate
+	select CRYPTO_LIB_UTILS
+	help
+	  Enable the ChaCha library interface.  Select this if your module uses
+	  chacha_crypt() or hchacha_block().
+
+config CRYPTO_LIB_CHACHA_ARCH
+	bool
+	depends on CRYPTO_LIB_CHACHA && !UML && !KMSAN
+	default y if ARM
+	default y if ARM64
+	default y if MIPS && CPU_MIPS32_R2
+	default y if PPC64 && CPU_LITTLE_ENDIAN && VSX
+	default y if RISCV && 64BIT && TOOLCHAIN_HAS_VECTOR_CRYPTO && \
+		     RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS
+	default y if S390
+	default y if X86_64
+
+config CRYPTO_LIB_CURVE25519
+	tristate
+	select CRYPTO_LIB_UTILS
+	help
+	  The Curve25519 library functions.  Select this if your module uses any
+	  of the functions from <crypto/curve25519.h>.
+
+config CRYPTO_LIB_CURVE25519_ARCH
+	bool
+	depends on CRYPTO_LIB_CURVE25519 && !UML && !KMSAN
+	default y if ARM && KERNEL_MODE_NEON && !CPU_BIG_ENDIAN
+	default y if PPC64 && CPU_LITTLE_ENDIAN
+	default y if X86_64
+
+config CRYPTO_LIB_CURVE25519_GENERIC
+	bool
+	depends on CRYPTO_LIB_CURVE25519
+	default y if !CRYPTO_LIB_CURVE25519_ARCH || ARM || X86_64
+
+config CRYPTO_LIB_DES
+	tristate
+
+config CRYPTO_LIB_GF128HASH
+	tristate
+	help
+	  The GHASH and POLYVAL library functions.  Select this if your module
+	  uses any of the functions from <crypto/gf128hash.h>.
+
+config CRYPTO_LIB_GF128HASH_ARCH
+	bool
+	depends on CRYPTO_LIB_GF128HASH && !UML
+	default y if ARM && KERNEL_MODE_NEON
+	default y if ARM64
+	default y if PPC64 && VSX
+	default y if RISCV && 64BIT && TOOLCHAIN_HAS_VECTOR_CRYPTO && \
+		     RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS
+	default y if S390
+	default y if X86_64
+
+config CRYPTO_LIB_MD5
+	tristate
+	help
+	  The MD5 and HMAC-MD5 library functions.  Select this if your module
+	  uses any of the functions from <crypto/md5.h>.
+
+config CRYPTO_LIB_MLDSA
+	tristate
+	select CRYPTO_LIB_SHA3
+	help
+	  The ML-DSA library functions.  Select this if your module uses any of
+	  the functions from <crypto/mldsa.h>.
+
+config CRYPTO_LIB_NH
+	tristate
+	help
+	  Implementation of the NH almost-universal hash function, specifically
+	  the variant of NH used in Adiantum.
+
+config CRYPTO_LIB_NH_ARCH
+	bool
+	depends on CRYPTO_LIB_NH && !UML && !KMSAN
+	default y if ARM && KERNEL_MODE_NEON
+	default y if ARM64
+	default y if X86_64
+
+config CRYPTO_LIB_POLY1305
+	tristate
+	help
+	  The Poly1305 library functions.  Select this if your module uses any
+	  of the functions from <crypto/poly1305.h>.
+
+config CRYPTO_LIB_POLY1305_ARCH
+	bool
+	depends on CRYPTO_LIB_POLY1305 && !UML && !KMSAN
+	default y if ARM
+	default y if ARM64
+	default y if MIPS
+	# The PPC64 code needs to be fixed to work in softirq context.
+	default y if PPC64 && CPU_LITTLE_ENDIAN && VSX && BROKEN
+	default y if RISCV
+	default y if X86_64
+
+# This symbol controls the inclusion of the Poly1305 generic code.  This differs
+# from most of the other algorithms, which handle the generic code
+# "automatically" via __maybe_unused.  This is needed so that the Adiantum code,
+# which calls the poly1305_core_*() functions directly, can enable them.
+config CRYPTO_LIB_POLY1305_GENERIC
+	bool
+	depends on CRYPTO_LIB_POLY1305
+	# Enable if there's no arch impl or the arch impl requires the generic
+	# impl as a fallback.  (Or if selected explicitly.)
+	default y if !CRYPTO_LIB_POLY1305_ARCH || PPC64
+
+config CRYPTO_LIB_POLY1305_RSIZE
+	int
+	default 2 if MIPS || RISCV
+	default 11 if X86_64
+	default 9 if ARM || ARM64
+	default 1
+
+config CRYPTO_LIB_CHACHA20POLY1305
+	tristate
+	select CRYPTO_LIB_CHACHA
+	select CRYPTO_LIB_POLY1305
+	select CRYPTO_LIB_UTILS
+
+config CRYPTO_LIB_SHA1
+	tristate
+	help
+	  The SHA-1 and HMAC-SHA1 library functions.  Select this if your module
+	  uses any of the functions from <crypto/sha1.h>.
+
+config CRYPTO_LIB_SHA1_ARCH
+	bool
+	depends on CRYPTO_LIB_SHA1 && !UML
+	default y if ARM
+	default y if ARM64
+	default y if MIPS && CPU_CAVIUM_OCTEON
+	default y if PPC
+	default y if S390
+	default y if SPARC64
+	default y if X86_64
+
+config CRYPTO_LIB_SHA256
+	tristate
+	help
+	  The SHA-224, SHA-256, HMAC-SHA224, and HMAC-SHA256 library functions.
+	  Select this if your module uses any of these functions from
+	  <crypto/sha2.h>.
+
+config CRYPTO_LIB_SHA256_ARCH
+	bool
+	depends on CRYPTO_LIB_SHA256 && !UML
+	default y if ARM && !CPU_V7M
+	default y if ARM64
+	default y if MIPS && CPU_CAVIUM_OCTEON
+	default y if PPC && SPE
+	default y if RISCV && 64BIT && TOOLCHAIN_HAS_VECTOR_CRYPTO && \
+		     RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS
+	default y if S390
+	default y if SPARC64
+	default y if X86_64
+
+config CRYPTO_LIB_SHA512
+	tristate
+	help
+	  The SHA-384, SHA-512, HMAC-SHA384, and HMAC-SHA512 library functions.
+	  Select this if your module uses any of these functions from
+	  <crypto/sha2.h>.
+
+config CRYPTO_LIB_SHA512_ARCH
+	bool
+	depends on CRYPTO_LIB_SHA512 && !UML
+	default y if ARM && !CPU_V7M
+	default y if ARM64
+	default y if MIPS && CPU_CAVIUM_OCTEON
+	default y if RISCV && 64BIT && TOOLCHAIN_HAS_VECTOR_CRYPTO && \
+		     RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS
+	default y if S390
+	default y if SPARC64
+	default y if X86_64
+
+config CRYPTO_LIB_SHA3
+	tristate
+	select CRYPTO_LIB_UTILS
+	help
+	  The SHA3 library functions.  Select this if your module uses any of
+	  the functions from <crypto/sha3.h>.
+
+config CRYPTO_LIB_SHA3_ARCH
+	bool
+	depends on CRYPTO_LIB_SHA3 && !UML
+	default y if ARM64
+	default y if S390
+
+config CRYPTO_LIB_SM3
+	tristate
+	help
+	  The SM3 library functions.  Select this if your module uses any of the
+	  functions from <crypto/sm3.h>.
+
+config CRYPTO_LIB_SM3_ARCH
+	bool
+	depends on CRYPTO_LIB_SM3 && !UML
+	default y if ARM64
+	default y if RISCV && 64BIT && TOOLCHAIN_HAS_VECTOR_CRYPTO && \
+		     RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS
+	default y if X86_64