From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- lib/crypto/Kconfig | 310 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 310 insertions(+) create mode 100644 lib/crypto/Kconfig (limited to 'lib/crypto/Kconfig') diff --git a/lib/crypto/Kconfig b/lib/crypto/Kconfig new file mode 100644 index 000000000..56f308dd0 --- /dev/null +++ b/lib/crypto/Kconfig @@ -0,0 +1,310 @@ +# SPDX-License-Identifier: GPL-2.0 + +config CRYPTO_HASH_INFO + bool + +config CRYPTO_LIB_UTILS + tristate + +config CRYPTO_LIB_AES + tristate + # Select dependencies of modes that are part of libaes. + select CRYPTO_LIB_GF128HASH if CRYPTO_LIB_AES_GCM != n + select CRYPTO_LIB_UTILS + +config CRYPTO_LIB_AES_ARCH + bool + depends on CRYPTO_LIB_AES && !UML && !KMSAN + default y if ARM + default y if ARM64 + default y if PPC && (SPE || (PPC64 && VSX)) + default y if RISCV && 64BIT && TOOLCHAIN_HAS_VECTOR_CRYPTO && \ + RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS + default y if S390 + default y if SPARC64 + default y if X86 + +config CRYPTO_LIB_AESCFB + tristate + select CRYPTO_LIB_AES + select CRYPTO_LIB_UTILS + +config CRYPTO_LIB_AES_CBC + tristate + select CRYPTO_LIB_AES + help + The AES-CBC and AES-CBC-CTS library functions. + +config CRYPTO_LIB_AES_CBC_MACS + tristate + select CRYPTO_LIB_AES + help + The AES-CMAC, AES-XCBC-MAC, and AES-CBC-MAC library functions. Select + this if your module uses any of the functions from + . + +config CRYPTO_LIB_AES_CCM + tristate + select CRYPTO_LIB_AES + select CRYPTO_LIB_AES_CBC_MACS + select CRYPTO_LIB_AES_CTR + help + The AES-CCM library functions. + +config CRYPTO_LIB_AES_CTR + tristate + select CRYPTO_LIB_AES + help + The AES-CTR and AES-XCTR library functions. + +config CRYPTO_LIB_AES_ECB + tristate + select CRYPTO_LIB_AES + help + The AES-ECB library functions. + +config CRYPTO_LIB_AES_GCM + tristate + select CRYPTO_LIB_AES + select CRYPTO_LIB_AES_CTR + help + The AES-GCM library functions. + +config CRYPTO_LIB_AES_XTS + tristate + select CRYPTO_LIB_AES + help + The AES-XTS library functions. + +config CRYPTO_LIB_ARC4 + tristate + +config CRYPTO_LIB_GF128MUL + tristate + +config CRYPTO_LIB_BLAKE2B + tristate + help + The BLAKE2b library functions. Select this if your module uses any of + the functions from . + +config CRYPTO_LIB_BLAKE2B_ARCH + bool + depends on CRYPTO_LIB_BLAKE2B && !UML + default y if ARM && KERNEL_MODE_NEON + +# BLAKE2s support is always built-in, so there's no CRYPTO_LIB_BLAKE2S option. + +config CRYPTO_LIB_BLAKE2S_ARCH + bool + depends on !UML + default y if ARM + default y if X86_64 + +config CRYPTO_LIB_CHACHA + tristate + select CRYPTO_LIB_UTILS + help + Enable the ChaCha library interface. Select this if your module uses + chacha_crypt() or hchacha_block(). + +config CRYPTO_LIB_CHACHA_ARCH + bool + depends on CRYPTO_LIB_CHACHA && !UML && !KMSAN + default y if ARM + default y if ARM64 + default y if MIPS && CPU_MIPS32_R2 + default y if PPC64 && CPU_LITTLE_ENDIAN && VSX + default y if RISCV && 64BIT && TOOLCHAIN_HAS_VECTOR_CRYPTO && \ + RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS + default y if S390 + default y if X86_64 + +config CRYPTO_LIB_CURVE25519 + tristate + select CRYPTO_LIB_UTILS + help + The Curve25519 library functions. Select this if your module uses any + of the functions from . + +config CRYPTO_LIB_CURVE25519_ARCH + bool + depends on CRYPTO_LIB_CURVE25519 && !UML && !KMSAN + default y if ARM && KERNEL_MODE_NEON && !CPU_BIG_ENDIAN + default y if PPC64 && CPU_LITTLE_ENDIAN + default y if X86_64 + +config CRYPTO_LIB_CURVE25519_GENERIC + bool + depends on CRYPTO_LIB_CURVE25519 + default y if !CRYPTO_LIB_CURVE25519_ARCH || ARM || X86_64 + +config CRYPTO_LIB_DES + tristate + +config CRYPTO_LIB_GF128HASH + tristate + help + The GHASH and POLYVAL library functions. Select this if your module + uses any of the functions from . + +config CRYPTO_LIB_GF128HASH_ARCH + bool + depends on CRYPTO_LIB_GF128HASH && !UML + default y if ARM && KERNEL_MODE_NEON + default y if ARM64 + default y if PPC64 && VSX + default y if RISCV && 64BIT && TOOLCHAIN_HAS_VECTOR_CRYPTO && \ + RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS + default y if S390 + default y if X86_64 + +config CRYPTO_LIB_MD5 + tristate + help + The MD5 and HMAC-MD5 library functions. Select this if your module + uses any of the functions from . + +config CRYPTO_LIB_MLDSA + tristate + select CRYPTO_LIB_SHA3 + help + The ML-DSA library functions. Select this if your module uses any of + the functions from . + +config CRYPTO_LIB_NH + tristate + help + Implementation of the NH almost-universal hash function, specifically + the variant of NH used in Adiantum. + +config CRYPTO_LIB_NH_ARCH + bool + depends on CRYPTO_LIB_NH && !UML && !KMSAN + default y if ARM && KERNEL_MODE_NEON + default y if ARM64 + default y if X86_64 + +config CRYPTO_LIB_POLY1305 + tristate + help + The Poly1305 library functions. Select this if your module uses any + of the functions from . + +config CRYPTO_LIB_POLY1305_ARCH + bool + depends on CRYPTO_LIB_POLY1305 && !UML && !KMSAN + default y if ARM + default y if ARM64 + default y if MIPS + # The PPC64 code needs to be fixed to work in softirq context. + default y if PPC64 && CPU_LITTLE_ENDIAN && VSX && BROKEN + default y if RISCV + default y if X86_64 + +# This symbol controls the inclusion of the Poly1305 generic code. This differs +# from most of the other algorithms, which handle the generic code +# "automatically" via __maybe_unused. This is needed so that the Adiantum code, +# which calls the poly1305_core_*() functions directly, can enable them. +config CRYPTO_LIB_POLY1305_GENERIC + bool + depends on CRYPTO_LIB_POLY1305 + # Enable if there's no arch impl or the arch impl requires the generic + # impl as a fallback. (Or if selected explicitly.) + default y if !CRYPTO_LIB_POLY1305_ARCH || PPC64 + +config CRYPTO_LIB_POLY1305_RSIZE + int + default 2 if MIPS || RISCV + default 11 if X86_64 + default 9 if ARM || ARM64 + default 1 + +config CRYPTO_LIB_CHACHA20POLY1305 + tristate + select CRYPTO_LIB_CHACHA + select CRYPTO_LIB_POLY1305 + select CRYPTO_LIB_UTILS + +config CRYPTO_LIB_SHA1 + tristate + help + The SHA-1 and HMAC-SHA1 library functions. Select this if your module + uses any of the functions from . + +config CRYPTO_LIB_SHA1_ARCH + bool + depends on CRYPTO_LIB_SHA1 && !UML + default y if ARM + default y if ARM64 + default y if MIPS && CPU_CAVIUM_OCTEON + default y if PPC + default y if S390 + default y if SPARC64 + default y if X86_64 + +config CRYPTO_LIB_SHA256 + tristate + help + The SHA-224, SHA-256, HMAC-SHA224, and HMAC-SHA256 library functions. + Select this if your module uses any of these functions from + . + +config CRYPTO_LIB_SHA256_ARCH + bool + depends on CRYPTO_LIB_SHA256 && !UML + default y if ARM && !CPU_V7M + default y if ARM64 + default y if MIPS && CPU_CAVIUM_OCTEON + default y if PPC && SPE + default y if RISCV && 64BIT && TOOLCHAIN_HAS_VECTOR_CRYPTO && \ + RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS + default y if S390 + default y if SPARC64 + default y if X86_64 + +config CRYPTO_LIB_SHA512 + tristate + help + The SHA-384, SHA-512, HMAC-SHA384, and HMAC-SHA512 library functions. + Select this if your module uses any of these functions from + . + +config CRYPTO_LIB_SHA512_ARCH + bool + depends on CRYPTO_LIB_SHA512 && !UML + default y if ARM && !CPU_V7M + default y if ARM64 + default y if MIPS && CPU_CAVIUM_OCTEON + default y if RISCV && 64BIT && TOOLCHAIN_HAS_VECTOR_CRYPTO && \ + RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS + default y if S390 + default y if SPARC64 + default y if X86_64 + +config CRYPTO_LIB_SHA3 + tristate + select CRYPTO_LIB_UTILS + help + The SHA3 library functions. Select this if your module uses any of + the functions from . + +config CRYPTO_LIB_SHA3_ARCH + bool + depends on CRYPTO_LIB_SHA3 && !UML + default y if ARM64 + default y if S390 + +config CRYPTO_LIB_SM3 + tristate + help + The SM3 library functions. Select this if your module uses any of the + functions from . + +config CRYPTO_LIB_SM3_ARCH + bool + depends on CRYPTO_LIB_SM3 && !UML + default y if ARM64 + default y if RISCV && 64BIT && TOOLCHAIN_HAS_VECTOR_CRYPTO && \ + RISCV_EFFICIENT_VECTOR_UNALIGNED_ACCESS + default y if X86_64 -- cgit v1.3.1