Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 177 insertions, 0 deletions

diff --git a/fs/proc/proc_tty.c b/fs/proc/proc_tty.c
new file mode 100644
index 000000000..5c6a5ceab
--- /dev/null
+++ b/fs/proc/proc_tty.c
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * proc_tty.c -- handles /proc/tty
+ *
+ * Copyright 1997, Theodore Ts'o
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/proc_fs.h>
+#include <linux/stat.h>
+#include <linux/tty.h>
+#include <linux/seq_file.h>
+#include <linux/bitops.h>
+#include "internal.h"
+
+/*
+ * The /proc/tty directory inodes...
+ */
+static struct proc_dir_entry *proc_tty_driver;
+
+/*
+ * This is the handler for /proc/tty/drivers
+ */
+static void show_tty_range(struct seq_file *m, struct tty_driver *p,
+	dev_t from, int num)
+{
+	seq_printf(m, "%-20s ", p->driver_name ? p->driver_name : "unknown");
+	seq_printf(m, "/dev/%-8s ", p->name);
+	if (p->num > 1) {
+		seq_printf(m, "%3d %d-%d ", MAJOR(from), MINOR(from),
+			MINOR(from) + num - 1);
+	} else {
+		seq_printf(m, "%3d %7d ", MAJOR(from), MINOR(from));
+	}
+	switch (p->type) {
+	case TTY_DRIVER_TYPE_SYSTEM:
+		seq_puts(m, "system");
+		if (p->subtype == SYSTEM_TYPE_TTY)
+			seq_puts(m, ":/dev/tty");
+		else if (p->subtype == SYSTEM_TYPE_SYSCONS)
+			seq_puts(m, ":console");
+		else if (p->subtype == SYSTEM_TYPE_CONSOLE)
+			seq_puts(m, ":vtmaster");
+		break;
+	case TTY_DRIVER_TYPE_CONSOLE:
+		seq_puts(m, "console");
+		break;
+	case TTY_DRIVER_TYPE_SERIAL:
+		seq_puts(m, "serial");
+		break;
+	case TTY_DRIVER_TYPE_PTY:
+		if (p->subtype == PTY_TYPE_MASTER)
+			seq_puts(m, "pty:master");
+		else if (p->subtype == PTY_TYPE_SLAVE)
+			seq_puts(m, "pty:slave");
+		else
+			seq_puts(m, "pty");
+		break;
+	default:
+		seq_printf(m, "type:%d.%d", p->type, p->subtype);
+	}
+	seq_putc(m, '\n');
+}
+
+static int show_tty_driver(struct seq_file *m, void *v)
+{
+	struct tty_driver *p = list_entry(v, struct tty_driver, tty_drivers);
+	dev_t from = MKDEV(p->major, p->minor_start);
+	dev_t to = from + p->num;
+
+	if (&p->tty_drivers == tty_drivers.next) {
+		/* pseudo-drivers first */
+		seq_printf(m, "%-20s /dev/%-8s ", "/dev/tty", "tty");
+		seq_printf(m, "%3d %7d ", TTYAUX_MAJOR, 0);
+		seq_puts(m, "system:/dev/tty\n");
+		seq_printf(m, "%-20s /dev/%-8s ", "/dev/console", "console");
+		seq_printf(m, "%3d %7d ", TTYAUX_MAJOR, 1);
+		seq_puts(m, "system:console\n");
+#ifdef CONFIG_UNIX98_PTYS
+		seq_printf(m, "%-20s /dev/%-8s ", "/dev/ptmx", "ptmx");
+		seq_printf(m, "%3d %7d ", TTYAUX_MAJOR, 2);
+		seq_puts(m, "system\n");
+#endif
+#ifdef CONFIG_VT
+		seq_printf(m, "%-20s /dev/%-8s ", "/dev/vc/0", "vc/0");
+		seq_printf(m, "%3d %7d ", TTY_MAJOR, 0);
+		seq_puts(m, "system:vtmaster\n");
+#endif
+	}
+
+	while (MAJOR(from) < MAJOR(to)) {
+		dev_t next = MKDEV(MAJOR(from)+1, 0);
+		show_tty_range(m, p, from, next - from);
+		from = next;
+	}
+	if (from != to)
+		show_tty_range(m, p, from, to - from);
+	return 0;
+}
+
+/* iterator */
+static void *t_start(struct seq_file *m, loff_t *pos)
+{
+	mutex_lock(&tty_mutex);
+	return seq_list_start(&tty_drivers, *pos);
+}
+
+static void *t_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	return seq_list_next(v, &tty_drivers, pos);
+}
+
+static void t_stop(struct seq_file *m, void *v)
+{
+	mutex_unlock(&tty_mutex);
+}
+
+static const struct seq_operations tty_drivers_op = {
+	.start	= t_start,
+	.next	= t_next,
+	.stop	= t_stop,
+	.show	= show_tty_driver
+};
+
+/*
+ * This function is called by tty_register_driver() to handle
+ * registering the driver's /proc handler into /proc/tty/driver/<foo>
+ */
+void proc_tty_register_driver(struct tty_driver *driver)
+{
+	struct proc_dir_entry *ent;
+		
+	if (!driver->driver_name || driver->proc_entry ||
+	    !driver->ops->proc_show)
+		return;
+
+	ent = proc_create_single_data(driver->driver_name, 0, proc_tty_driver,
+			       driver->ops->proc_show, driver);
+	driver->proc_entry = ent;
+}
+
+/*
+ * This function is called by tty_unregister_driver()
+ */
+void proc_tty_unregister_driver(struct tty_driver *driver)
+{
+	struct proc_dir_entry *ent;
+
+	ent = driver->proc_entry;
+	if (!ent)
+		return;
+		
+	remove_proc_entry(ent->name, proc_tty_driver);
+	
+	driver->proc_entry = NULL;
+}
+
+/*
+ * Called by proc_root_init() to initialize the /proc/tty subtree
+ */
+void __init proc_tty_init(void)
+{
+	if (!proc_mkdir("tty", NULL))
+		return;
+	proc_mkdir("tty/ldisc", NULL);	/* Preserved: it's userspace visible */
+	/*
+	 * /proc/tty/driver/serial reveals the exact character counts for
+	 * serial links which is just too easy to abuse for inferring
+	 * password lengths and inter-keystroke timings during password
+	 * entry.
+	 */
+	proc_tty_driver = proc_mkdir_mode("tty/driver", S_IRUSR|S_IXUSR, NULL);
+	proc_create_seq("tty/ldiscs", 0, NULL, &tty_ldiscs_seq_ops);
+	proc_create_seq("tty/drivers", 0, NULL, &tty_drivers_op);
+}