From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- fs/proc/proc_tty.c | 177 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 177 insertions(+) create mode 100644 fs/proc/proc_tty.c (limited to 'fs/proc/proc_tty.c') diff --git a/fs/proc/proc_tty.c b/fs/proc/proc_tty.c new file mode 100644 index 000000000..5c6a5ceab --- /dev/null +++ b/fs/proc/proc_tty.c @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * proc_tty.c -- handles /proc/tty + * + * Copyright 1997, Theodore Ts'o + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "internal.h" + +/* + * The /proc/tty directory inodes... + */ +static struct proc_dir_entry *proc_tty_driver; + +/* + * This is the handler for /proc/tty/drivers + */ +static void show_tty_range(struct seq_file *m, struct tty_driver *p, + dev_t from, int num) +{ + seq_printf(m, "%-20s ", p->driver_name ? p->driver_name : "unknown"); + seq_printf(m, "/dev/%-8s ", p->name); + if (p->num > 1) { + seq_printf(m, "%3d %d-%d ", MAJOR(from), MINOR(from), + MINOR(from) + num - 1); + } else { + seq_printf(m, "%3d %7d ", MAJOR(from), MINOR(from)); + } + switch (p->type) { + case TTY_DRIVER_TYPE_SYSTEM: + seq_puts(m, "system"); + if (p->subtype == SYSTEM_TYPE_TTY) + seq_puts(m, ":/dev/tty"); + else if (p->subtype == SYSTEM_TYPE_SYSCONS) + seq_puts(m, ":console"); + else if (p->subtype == SYSTEM_TYPE_CONSOLE) + seq_puts(m, ":vtmaster"); + break; + case TTY_DRIVER_TYPE_CONSOLE: + seq_puts(m, "console"); + break; + case TTY_DRIVER_TYPE_SERIAL: + seq_puts(m, "serial"); + break; + case TTY_DRIVER_TYPE_PTY: + if (p->subtype == PTY_TYPE_MASTER) + seq_puts(m, "pty:master"); + else if (p->subtype == PTY_TYPE_SLAVE) + seq_puts(m, "pty:slave"); + else + seq_puts(m, "pty"); + break; + default: + seq_printf(m, "type:%d.%d", p->type, p->subtype); + } + seq_putc(m, '\n'); +} + +static int show_tty_driver(struct seq_file *m, void *v) +{ + struct tty_driver *p = list_entry(v, struct tty_driver, tty_drivers); + dev_t from = MKDEV(p->major, p->minor_start); + dev_t to = from + p->num; + + if (&p->tty_drivers == tty_drivers.next) { + /* pseudo-drivers first */ + seq_printf(m, "%-20s /dev/%-8s ", "/dev/tty", "tty"); + seq_printf(m, "%3d %7d ", TTYAUX_MAJOR, 0); + seq_puts(m, "system:/dev/tty\n"); + seq_printf(m, "%-20s /dev/%-8s ", "/dev/console", "console"); + seq_printf(m, "%3d %7d ", TTYAUX_MAJOR, 1); + seq_puts(m, "system:console\n"); +#ifdef CONFIG_UNIX98_PTYS + seq_printf(m, "%-20s /dev/%-8s ", "/dev/ptmx", "ptmx"); + seq_printf(m, "%3d %7d ", TTYAUX_MAJOR, 2); + seq_puts(m, "system\n"); +#endif +#ifdef CONFIG_VT + seq_printf(m, "%-20s /dev/%-8s ", "/dev/vc/0", "vc/0"); + seq_printf(m, "%3d %7d ", TTY_MAJOR, 0); + seq_puts(m, "system:vtmaster\n"); +#endif + } + + while (MAJOR(from) < MAJOR(to)) { + dev_t next = MKDEV(MAJOR(from)+1, 0); + show_tty_range(m, p, from, next - from); + from = next; + } + if (from != to) + show_tty_range(m, p, from, to - from); + return 0; +} + +/* iterator */ +static void *t_start(struct seq_file *m, loff_t *pos) +{ + mutex_lock(&tty_mutex); + return seq_list_start(&tty_drivers, *pos); +} + +static void *t_next(struct seq_file *m, void *v, loff_t *pos) +{ + return seq_list_next(v, &tty_drivers, pos); +} + +static void t_stop(struct seq_file *m, void *v) +{ + mutex_unlock(&tty_mutex); +} + +static const struct seq_operations tty_drivers_op = { + .start = t_start, + .next = t_next, + .stop = t_stop, + .show = show_tty_driver +}; + +/* + * This function is called by tty_register_driver() to handle + * registering the driver's /proc handler into /proc/tty/driver/ + */ +void proc_tty_register_driver(struct tty_driver *driver) +{ + struct proc_dir_entry *ent; + + if (!driver->driver_name || driver->proc_entry || + !driver->ops->proc_show) + return; + + ent = proc_create_single_data(driver->driver_name, 0, proc_tty_driver, + driver->ops->proc_show, driver); + driver->proc_entry = ent; +} + +/* + * This function is called by tty_unregister_driver() + */ +void proc_tty_unregister_driver(struct tty_driver *driver) +{ + struct proc_dir_entry *ent; + + ent = driver->proc_entry; + if (!ent) + return; + + remove_proc_entry(ent->name, proc_tty_driver); + + driver->proc_entry = NULL; +} + +/* + * Called by proc_root_init() to initialize the /proc/tty subtree + */ +void __init proc_tty_init(void) +{ + if (!proc_mkdir("tty", NULL)) + return; + proc_mkdir("tty/ldisc", NULL); /* Preserved: it's userspace visible */ + /* + * /proc/tty/driver/serial reveals the exact character counts for + * serial links which is just too easy to abuse for inferring + * password lengths and inter-keystroke timings during password + * entry. + */ + proc_tty_driver = proc_mkdir_mode("tty/driver", S_IRUSR|S_IXUSR, NULL); + proc_create_seq("tty/ldiscs", 0, NULL, &tty_ldiscs_seq_ops); + proc_create_seq("tty/drivers", 0, NULL, &tty_drivers_op); +} -- cgit v1.3.1