drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 99 insertions, 0 deletions

diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c
new file mode 100644
index 000000000..467b28891
--- /dev/null
+++ b/drivers/nvmem/u-boot-env.c
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "layouts/u-boot-env.h"
+
+struct u_boot_env {
+	struct device *dev;
+	struct nvmem_device *nvmem;
+	enum u_boot_env_format format;
+
+	struct mtd_info *mtd;
+};
+
+static int u_boot_env_read(void *context, unsigned int offset, void *val,
+			   size_t bytes)
+{
+	struct u_boot_env *priv = context;
+	struct device *dev = priv->dev;
+	size_t bytes_read;
+	int err;
+
+	err = mtd_read(priv->mtd, offset, bytes, &bytes_read, val);
+	if (err && !mtd_is_bitflip(err)) {
+		dev_err(dev, "Failed to read from mtd: %d\n", err);
+		return err;
+	}
+
+	if (bytes_read != bytes) {
+		dev_err(dev, "Failed to read %zu bytes\n", bytes);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int u_boot_env_probe(struct platform_device *pdev)
+{
+	struct nvmem_config config = {
+		.name = "u-boot-env",
+		.reg_read = u_boot_env_read,
+	};
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct u_boot_env *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->dev = dev;
+
+	priv->format = (uintptr_t)of_device_get_match_data(dev);
+
+	priv->mtd = of_get_mtd_device_by_node(np);
+	if (IS_ERR(priv->mtd)) {
+		dev_err_probe(dev, PTR_ERR(priv->mtd), "Failed to get %pOF MTD\n", np);
+		return PTR_ERR(priv->mtd);
+	}
+
+	config.dev = dev;
+	config.priv = priv;
+	config.size = priv->mtd->size;
+
+	priv->nvmem = devm_nvmem_register(dev, &config);
+	if (IS_ERR(priv->nvmem))
+		return PTR_ERR(priv->nvmem);
+
+	return u_boot_env_parse(dev, priv->nvmem, priv->format);
+}
+
+static const struct of_device_id u_boot_env_of_match_table[] = {
+	{ .compatible = "u-boot,env", .data = (void *)U_BOOT_FORMAT_SINGLE, },
+	{ .compatible = "u-boot,env-redundant-bool", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
+	{ .compatible = "u-boot,env-redundant-count", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
+	{ .compatible = "brcm,env", .data = (void *)U_BOOT_FORMAT_BROADCOM, },
+	{},
+};
+
+static struct platform_driver u_boot_env_driver = {
+	.probe = u_boot_env_probe,
+	.driver = {
+		.name = "u_boot_env",
+		.of_match_table = u_boot_env_of_match_table,
+	},
+};
+module_platform_driver(u_boot_env_driver);
+
+MODULE_AUTHOR("Rafał Miłecki");
+MODULE_DESCRIPTION("U-Boot environment variables support module");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, u_boot_env_of_match_table);