drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

62 files changed, 16527 insertions, 0 deletions

diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
new file mode 100644
index 000000000..c36c2a4c2
--- /dev/null
+++ b/drivers/nvmem/Kconfig
@@ -0,0 +1,586 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig NVMEM
+	bool "NVMEM Support"
+	imply NVMEM_LAYOUTS
+	help
+	  Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES...
+
+	  This framework is designed to provide a generic interface to NVMEM
+	  from both the Linux Kernel and the userspace.
+
+	  If unsure, say no.
+
+if NVMEM
+
+config NVMEM_SYSFS
+	bool "/sys/bus/nvmem/devices/*/nvmem (sysfs interface)"
+	depends on SYSFS
+	default y
+	help
+	 Say Y here to add a sysfs interface for NVMEM.
+
+	 This interface is mostly used by userspace applications to
+	 read/write directly into nvmem.
+
+# Layouts
+
+source "drivers/nvmem/layouts/Kconfig"
+
+# Devices
+
+if NVMEM_SYSFS
+
+config EEPROM_AT24
+	tristate "I2C EEPROMs / RAMs / ROMs from most vendors"
+	depends on I2C && SYSFS
+	select REGMAP
+	select REGMAP_I2C
+	help
+	  Enable this driver to get read/write support to most I2C EEPROMs
+	  and compatible devices like FRAMs, SRAMs, ROMs etc. After you
+	  configure the driver to know about each chip on your target
+	  board.  Use these generic chip names, instead of vendor-specific
+	  ones like at24c64, 24lc02 or fm24c04:
+
+	     24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
+	     24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024, 24c2048
+
+	  Unless you like data loss puzzles, always be sure that any chip
+	  you configure as a 24c32 (32 kbit) or larger is NOT really a
+	  24c16 (16 kbit) or smaller, and vice versa. Marking the chip
+	  as read-only won't help recover from this. Also, if your chip
+	  has any software write-protect mechanism you may want to review the
+	  code to make sure this driver won't turn it on by accident.
+
+	  If you use this with an SMBus adapter instead of an I2C adapter,
+	  full functionality is not available.  Only smaller devices are
+	  supported (24c16 and below, max 4 kByte).
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called at24.
+
+config EEPROM_AT25
+	tristate "SPI EEPROMs (FRAMs) from most vendors"
+	depends on SPI && SYSFS
+	select SPI_MEM
+	help
+	  Enable this driver to get read/write support to most SPI EEPROMs
+	  and Cypress FRAMs,
+	  after you configure the board init code to know about each eeprom
+	  on your target board.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called at25.
+
+config EEPROM_93XX46
+	tristate "Microwire EEPROM 93XX46 support"
+	depends on SPI && SYSFS
+	select REGMAP
+	help
+	  Driver for the microwire EEPROM chipsets 93xx46x. The driver
+	  supports both read and write commands and also the command to
+	  erase the whole EEPROM.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called eeprom_93xx46.
+
+	  If unsure, say N.
+
+config EEPROM_EE1004
+	tristate "SPD EEPROMs on DDR4 memory modules"
+	depends on I2C && SYSFS
+	help
+	  Enable this driver to get read support to SPD EEPROMs following
+	  the JEDEC EE1004 standard. These are typically found on DDR4
+	  SDRAM memory modules.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called ee1004.
+
+config EEPROM_M24LR
+	tristate "STMicroelectronics M24LR RFID/NFC EEPROM support"
+	depends on I2C && SYSFS
+	select REGMAP_I2C
+	help
+	  This enables support for STMicroelectronics M24LR RFID/NFC EEPROM
+	  chips. These dual-interface devices expose two I2C addresses:
+	  one for EEPROM memory access and another for control and system
+	  configuration (e.g. UID, password handling).
+
+	  This driver provides a sysfs interface for control functions and
+	  integrates with the nvmem subsystem for EEPROM access.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called m24lr.
+
+endif # NVMEM_SYSFS
+
+config NVMEM_AIROHA_SMC_EFUSES
+	tristate "Airoha SMC eFuse support"
+	depends on ARM64
+	depends on ARCH_AIROHA || COMPILE_TEST
+	depends on HAVE_ARM_SMCCC
+	default ARCH_AIROHA
+	help
+	  Say y here to enable support for reading eFuses on Airoha AN7581
+	  SoCs. These are e.g. used to store factory programmed
+	  calibration data required for the PCIe or the USB-C PHY or Thermal.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called nvmem-airoha-smc-efuses.
+
+config NVMEM_AN8855_EFUSE
+	tristate "Airoha AN8855 eFuse support"
+	depends on COMPILE_TEST
+	help
+	  Say y here to enable support for reading eFuses on Airoha AN8855
+	  Switch. These are e.g. used to store factory programmed
+	  calibration data required for the PHY.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called nvmem-an8855-efuse.
+
+config NVMEM_APPLE_EFUSES
+	tristate "Apple eFuse support"
+	depends on ARCH_APPLE || COMPILE_TEST
+	help
+	  Say y here to enable support for reading eFuses on Apple SoCs
+	  such as the M1. These are e.g. used to store factory programmed
+	  calibration data required for the PCIe or the USB-C PHY.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called nvmem-apple-efuses.
+
+config NVMEM_APPLE_SPMI
+	tristate "Apple SPMI NVMEM"
+	depends on ARCH_APPLE || COMPILE_TEST
+	depends on SPMI
+	select REGMAP_SPMI
+	help
+	  Say y here to build a driver to expose NVMEM cells for a set of power
+	  and RTC-related settings on a SPMI-attached PMIC present on Apple
+	  devices, such as Apple Silicon Macs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called apple-nvmem-spmi.
+
+config NVMEM_BCM_OCOTP
+	tristate "Broadcom On-Chip OTP Controller support"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	depends on HAS_IOMEM
+	default ARCH_BCM_IPROC
+	help
+	  Say y here to enable read/write access to the Broadcom OTP
+	  controller.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-bcm-ocotp.
+
+config NVMEM_BRCM_NVRAM
+	tristate "Broadcom's NVRAM support"
+	depends on ARCH_BCM_5301X || COMPILE_TEST
+	depends on HAS_IOMEM
+	select GENERIC_NET_UTILS
+	help
+	  This driver provides support for Broadcom's NVRAM that can be accessed
+	  using I/O mapping.
+
+config NVMEM_IMX_IIM
+	tristate "i.MX IC Identification Module support"
+	depends on ARCH_MXC || COMPILE_TEST
+	help
+	  This is a driver for the IC Identification Module (IIM) available on
+	  i.MX SoCs, providing access to 4 Kbits of programmable
+	  eFuses.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-imx-iim.
+
+config NVMEM_IMX_OCOTP
+	tristate "i.MX 6/7/8 On-Chip OTP Controller support"
+	depends on ARCH_MXC || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This is a driver for the On-Chip OTP Controller (OCOTP) available on
+	  i.MX6 SoCs, providing access to 4 Kbits of one-time programmable
+	  eFuses.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-imx-ocotp.
+
+config NVMEM_IMX_OCOTP_ELE
+	tristate "i.MX On-Chip OTP Controller support"
+	depends on ARCH_MXC || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on OF
+	help
+	  This is a driver for the On-Chip OTP Controller (OCOTP)
+	  available on i.MX SoCs which has ELE.
+
+config NVMEM_IMX_OCOTP_SCU
+	tristate "i.MX8 SCU On-Chip OTP Controller support"
+	depends on IMX_SCU
+	depends on HAVE_ARM_SMCCC
+	help
+	  This is a driver for the SCU On-Chip OTP Controller (OCOTP)
+	  available on i.MX8 SoCs.
+
+config NVMEM_JZ4780_EFUSE
+	tristate "JZ4780 EFUSE Memory Support"
+	depends on MACH_INGENIC || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on OF
+	select REGMAP_MMIO
+	help
+	  Say Y here to include support for JZ4780 efuse memory found on
+	  all JZ4780 SoC based devices.
+	  To compile this driver as a module, choose M here: the module
+	  will be called nvmem_jz4780_efuse.
+
+config NVMEM_LAN9662_OTPC
+	tristate "Microchip LAN9662 OTP controller support"
+	depends on SOC_LAN966 || ARCH_LAN969X || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This driver enables the OTP controller available on Microchip LAN9662
+	  SoCs. It controls the access to the OTP memory connected to it.
+
+config NVMEM_LAYERSCAPE_SFP
+	tristate "Layerscape SFP (Security Fuse Processor) support"
+	depends on ARCH_LAYERSCAPE || COMPILE_TEST
+	depends on HAS_IOMEM
+	select REGMAP_MMIO
+	help
+	  This driver provides support to read the eFuses on Freescale
+	  Layerscape SoC's. For example, the vendor provides a per part
+	  unique ID there.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called layerscape-sfp.
+
+config NVMEM_LPC18XX_EEPROM
+	tristate "NXP LPC18XX EEPROM Memory Support"
+	depends on ARCH_LPC18XX || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Say Y here to include support for NXP LPC18xx EEPROM memory found in
+	  NXP LPC185x/3x and LPC435x/3x/2x/1x devices.
+	  To compile this driver as a module, choose M here: the module
+	  will be called nvmem_lpc18xx_eeprom.
+
+config NVMEM_LPC18XX_OTP
+	tristate "NXP LPC18XX OTP Memory Support"
+	depends on ARCH_LPC18XX || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Say Y here to include support for NXP LPC18xx OTP memory found on
+	  all LPC18xx and LPC43xx devices.
+	  To compile this driver as a module, choose M here: the module
+	  will be called nvmem_lpc18xx_otp.
+
+config NVMEM_MAX77759
+	tristate "Maxim Integrated MAX77759 NVMEM Support"
+	depends on MFD_MAX77759
+	default MFD_MAX77759
+	help
+	  Say Y here to include support for the user-accessible storage found
+	  in Maxim Integrated MAX77759 PMICs. This IC provides space for 30
+	  bytes of storage.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-max77759.
+
+config NVMEM_MESON_EFUSE
+	tristate "Amlogic Meson GX eFuse Support"
+	depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM
+	help
+	  This is a driver to retrieve specific values from the eFuse found on
+	  the Amlogic Meson GX SoCs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem_meson_efuse.
+
+config NVMEM_MESON_MX_EFUSE
+	tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support"
+	depends on ARCH_MESON || COMPILE_TEST
+	help
+	  This is a driver to retrieve specific values from the eFuse found on
+	  the Amlogic Meson6, Meson8 and Meson8b SoCs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem_meson_mx_efuse.
+
+config NVMEM_MICROCHIP_OTPC
+	tristate "Microchip OTPC support"
+	depends on ARCH_AT91 || COMPILE_TEST
+	help
+	  This driver enable the OTP controller available on Microchip SAMA7G5
+	  SoCs. It controls the access to the OTP memory connected to it.
+
+config NVMEM_MTK_EFUSE
+	tristate "Mediatek SoCs EFUSE support"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This is a driver to access hardware related data like sensor
+	  calibration, HDMI impedance etc.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called efuse-mtk.
+
+config NVMEM_MXS_OCOTP
+	tristate "Freescale MXS On-Chip OTP Memory Support"
+	depends on ARCH_MXS || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  If you say Y here, you will get readonly access to the
+	  One Time Programmable memory pages that are stored
+	  on the Freescale i.MX23/i.MX28 processor.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-mxs-ocotp.
+
+config NVMEM_NINTENDO_OTP
+	tristate "Nintendo Wii and Wii U OTP Support"
+	depends on WII || COMPILE_TEST
+	help
+	  This is a driver exposing the OTP of a Nintendo Wii or Wii U console.
+
+	  This memory contains common and per-console keys, signatures and
+	  related data required to access peripherals.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-nintendo-otp.
+
+config NVMEM_S32G_OCOTP
+	tristate "S32G SoC OCOTP support"
+	depends on ARCH_S32
+	help
+	  This is a driver for the 'OCOTP' peripheral available on S32G
+	  platforms.
+
+	  If you say Y here, you will get support for the One Time
+	  Programmable memory pages.
+
+config NVMEM_QCOM_QFPROM
+	tristate "Qualcomm QFPROM Support"
+	depends on ARCH_QCOM || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Say y here to enable QFPROM support. The QFPROM provides access
+	  functions for QFPROM data to rest of the drivers via nvmem interface.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem_qfprom.
+
+config NVMEM_QCOM_SEC_QFPROM
+        tristate "Qualcomm SECURE QFPROM Support"
+        depends on ARCH_QCOM || COMPILE_TEST
+        depends on HAS_IOMEM
+        depends on OF
+        select QCOM_SCM
+        help
+          Say y here to enable secure QFPROM support. The secure QFPROM provides access
+          functions for QFPROM data to rest of the drivers via nvmem interface.
+
+          This driver can also be built as a module. If so, the module will be called
+          nvmem_sec_qfprom.
+
+config NVMEM_QNAP_MCU_EEPROM
+	tristate "QNAP MCU EEPROM Support"
+	depends on MFD_QNAP_MCU
+	help
+	  Say y here to enable support for accessing the EEPROM attached to
+	  QNAP MCU devices. This EEPROM contains additional runtime device
+	  information, like MAC addresses for ethernet devices that do not
+	  contain their own mac storage.
+
+config NVMEM_RAVE_SP_EEPROM
+	tristate "Rave SP EEPROM Support"
+	depends on RAVE_SP_CORE
+	help
+	  Say y here to enable Rave SP EEPROM support.
+
+config NVMEM_RCAR_EFUSE
+	tristate "Renesas R-Car Gen4 E-FUSE support"
+	depends on (ARCH_RENESAS && ARM64) || COMPILE_TEST
+	help
+	  Enable support for reading the fuses in the E-FUSE or OTP
+	  non-volatile memory block on Renesas R-Car Gen4 SoCs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-rcar-efuse.
+
+config NVMEM_RMEM
+	tristate "Reserved Memory Based Driver Support"
+	depends on HAS_IOMEM
+	select CRC32
+	help
+	  This driver maps reserved memory into an nvmem device. It might be
+	  useful to expose information left by firmware in memory.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-rmem.
+
+config NVMEM_ROCKCHIP_EFUSE
+	tristate "Rockchip eFuse Support"
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This is a simple driver to dump specified values of Rockchip SoC
+	  from eFuse, such as cpu-leakage.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem_rockchip_efuse.
+
+config NVMEM_ROCKCHIP_OTP
+	tristate "Rockchip OTP controller support"
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This is a simple driver to dump specified values of Rockchip SoC
+	  from OTP, such as cpu-leakage.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem_rockchip_otp.
+
+config NVMEM_SC27XX_EFUSE
+	tristate "Spreadtrum SC27XX eFuse Support"
+	depends on MFD_SC27XX_PMIC || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This is a simple driver to dump specified values of Spreadtrum
+	  SC27XX PMICs from eFuse.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-sc27xx-efuse.
+
+config NVMEM_SNVS_LPGPR
+	tristate "Support for Low Power General Purpose Register"
+	depends on ARCH_MXC || COMPILE_TEST
+	help
+	  This is a driver for Low Power General Purpose Register (LPGPR) available on
+	  i.MX6 and i.MX7 SoCs in Secure Non-Volatile Storage (SNVS) of this chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-snvs-lpgpr.
+
+config NVMEM_SPMI_SDAM
+	tristate "SPMI SDAM Support"
+	depends on SPMI
+	help
+	  This driver supports the Shared Direct Access Memory Module on
+	  Qualcomm Technologies, Inc. PMICs. It provides the clients
+	  an interface to read/write to the SDAM module's shared memory.
+
+config NVMEM_SPRD_EFUSE
+	tristate "Spreadtrum SoC eFuse Support"
+	depends on ARCH_SPRD || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This is a simple driver to dump specified values of Spreadtrum
+	  SoCs from eFuse.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-sprd-efuse.
+
+config NVMEM_STM32_BSEC_OPTEE_TA
+	def_bool NVMEM_STM32_ROMEM && OPTEE
+	help
+	  Say y here to enable the accesses to STM32MP SoC OTPs by the OP-TEE
+	  trusted application STM32MP BSEC.
+
+	  This library is a used by stm32-romem driver or included in the module
+	  called nvmem-stm32-romem.
+
+config NVMEM_STM32_ROMEM
+	tristate "STMicroelectronics STM32 factory-programmed memory support"
+	depends on ARCH_STM32 || COMPILE_TEST
+	depends on OPTEE || !OPTEE
+	help
+	  Say y here to enable read-only access for STMicroelectronics STM32
+	  factory-programmed memory area.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-stm32-romem.
+
+config NVMEM_SUNPLUS_OCOTP
+	tristate "Sunplus SoC OTP support"
+	depends on SOC_SP7021 || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This is a driver for the On-chip OTP controller (OCOTP) available
+	  on Sunplus SoCs. It provides access to 128 bytes of one-time
+	  programmable eFuse.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-sunplus-ocotp.
+
+config NVMEM_SUNXI_SID
+	tristate "Allwinner SoCs SID support"
+	depends on ARCH_SUNXI
+	help
+	  This is a driver for the 'security ID' available on various Allwinner
+	  devices.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem_sunxi_sid.
+
+config NVMEM_U_BOOT_ENV
+	tristate "U-Boot environment variables support"
+	depends on OF && MTD
+	select NVMEM_LAYOUT_U_BOOT_ENV
+	help
+	  U-Boot stores its setup as environment variables. This driver adds
+	  support for verifying & exporting such data. It also exposes variables
+	  as NVMEM cells so they can be referenced by other drivers.
+
+	  Currently this drivers works only with env variables on top of MTD.
+
+	  If compiled as module it will be called nvmem_u-boot-env.
+
+config NVMEM_UNIPHIER_EFUSE
+	tristate "UniPhier SoCs eFuse support"
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This is a simple driver to dump specified values of UniPhier SoC
+	  from eFuse.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-uniphier-efuse.
+
+config NVMEM_VF610_OCOTP
+	tristate "VF610 SoC OCOTP support"
+	depends on SOC_VF610 || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This is a driver for the 'OCOTP' peripheral available on Vybrid
+	  devices like VF5xx and VF6xx.
+
+	  This driver can also be build as a module. If so, the module will
+	  be called nvmem-vf610-ocotp.
+
+config NVMEM_ZYNQMP
+	tristate "Xilinx ZYNQMP SoC nvmem firmware support"
+	depends on ARCH_ZYNQMP
+	help
+	  This is a driver to access hardware related data like
+	  soc revision, IDCODE... etc by using the firmware
+	  interface.
+
+	  If sure, say yes. If unsure, say no.
+
+config NVMEM_QORIQ_EFUSE
+	tristate "NXP QorIQ eFuse support"
+	depends on PPC_85xx || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This driver provides read support for the eFuses (SFP) on NXP QorIQ
+	  series SoC's. This includes secure boot settings, the globally unique
+	  NXP ID 'FUIDR' and the OEM unique ID 'OUIDR'.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem_qoriq_efuse.
+
+endif # NVMEM
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
new file mode 100644
index 000000000..2bbfb9ff1
--- /dev/null
+++ b/drivers/nvmem/Makefile
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for nvmem drivers.
+#
+
+obj-$(CONFIG_NVMEM)		+= nvmem_core.o
+nvmem_core-y			:= core.o
+obj-$(CONFIG_NVMEM_LAYOUTS)	+= nvmem_layouts.o
+nvmem_layouts-y			:= layouts.o
+obj-y				+= layouts/
+
+# Devices
+obj-$(CONFIG_EEPROM_AT24)		+= at24.o
+obj-$(CONFIG_EEPROM_AT25)		+= at25.o
+obj-$(CONFIG_EEPROM_93XX46)		+= eeprom_93xx46.o
+obj-$(CONFIG_EEPROM_EE1004)		+= ee1004.o
+obj-$(CONFIG_EEPROM_M24LR)		+= m24lr.o
+obj-$(CONFIG_NVMEM_AIROHA_SMC_EFUSES)	+= nvmem-airoha-smc-efuses.o
+nvmem-airoha-smc-efuses-y 		:= airoha-smc-efuses.o
+obj-$(CONFIG_NVMEM_AN8855_EFUSE)	+= nvmem-an8855-efuse.o
+nvmem-an8855-efuse-y 			:= an8855-efuse.o
+obj-$(CONFIG_NVMEM_APPLE_EFUSES)	+= nvmem-apple-efuses.o
+nvmem-apple-efuses-y 			:= apple-efuses.o
+obj-$(CONFIG_NVMEM_APPLE_SPMI)		+= apple_nvmem_spmi.o
+apple_nvmem_spmi-y			:= apple-spmi-nvmem.o
+obj-$(CONFIG_NVMEM_BCM_OCOTP)		+= nvmem-bcm-ocotp.o
+nvmem-bcm-ocotp-y			:= bcm-ocotp.o
+obj-$(CONFIG_NVMEM_BRCM_NVRAM)		+= nvmem_brcm_nvram.o
+nvmem_brcm_nvram-y			:= brcm_nvram.o
+obj-$(CONFIG_NVMEM_IMX_IIM)		+= nvmem-imx-iim.o
+nvmem-imx-iim-y				:= imx-iim.o
+obj-$(CONFIG_NVMEM_IMX_OCOTP)		+= nvmem-imx-ocotp.o
+nvmem-imx-ocotp-y			:= imx-ocotp.o
+obj-$(CONFIG_NVMEM_IMX_OCOTP_ELE)	+= nvmem-imx-ocotp-ele.o
+nvmem-imx-ocotp-ele-y			:= imx-ocotp-ele.o
+obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU)	+= nvmem-imx-ocotp-scu.o
+nvmem-imx-ocotp-scu-y			:= imx-ocotp-scu.o
+obj-$(CONFIG_NVMEM_JZ4780_EFUSE)	+= nvmem_jz4780_efuse.o
+nvmem_jz4780_efuse-y			:= jz4780-efuse.o
+obj-$(CONFIG_NVMEM_LAN9662_OTPC)	+= nvmem-lan9662-otpc.o
+nvmem-lan9662-otpc-y		:= lan9662-otpc.o
+obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP)	+= nvmem-layerscape-sfp.o
+nvmem-layerscape-sfp-y			:= layerscape-sfp.o
+obj-$(CONFIG_NVMEM_LPC18XX_EEPROM)	+= nvmem_lpc18xx_eeprom.o
+nvmem_lpc18xx_eeprom-y			:= lpc18xx_eeprom.o
+obj-$(CONFIG_NVMEM_LPC18XX_OTP)		+= nvmem_lpc18xx_otp.o
+nvmem_lpc18xx_otp-y			:= lpc18xx_otp.o
+obj-$(CONFIG_NVMEM_MAX77759)		+= nvmem-max77759.o
+nvmem-max77759-y			:= max77759-nvmem.o
+obj-$(CONFIG_NVMEM_MESON_EFUSE)		+= nvmem_meson_efuse.o
+nvmem_meson_efuse-y			:= meson-efuse.o
+obj-$(CONFIG_NVMEM_MESON_MX_EFUSE)	+= nvmem_meson_mx_efuse.o
+nvmem_meson_mx_efuse-y			:= meson-mx-efuse.o
+obj-$(CONFIG_NVMEM_MICROCHIP_OTPC)	+= nvmem-microchip-otpc.o
+nvmem-microchip-otpc-y			:= microchip-otpc.o
+obj-$(CONFIG_NVMEM_MTK_EFUSE)		+= nvmem_mtk-efuse.o
+nvmem_mtk-efuse-y			:= mtk-efuse.o
+obj-$(CONFIG_NVMEM_MXS_OCOTP)		+= nvmem-mxs-ocotp.o
+nvmem-mxs-ocotp-y			:= mxs-ocotp.o
+obj-$(CONFIG_NVMEM_NINTENDO_OTP)	+= nvmem-nintendo-otp.o
+nvmem-nintendo-otp-y			:= nintendo-otp.o
+obj-$(CONFIG_NVMEM_QCOM_QFPROM)		+= nvmem_qfprom.o
+nvmem_qfprom-y				:= qfprom.o
+obj-$(CONFIG_NVMEM_QCOM_SEC_QFPROM)	+= nvmem_sec_qfprom.o
+nvmem_sec_qfprom-y			:= sec-qfprom.o
+obj-$(CONFIG_NVMEM_QNAP_MCU_EEPROM)	+= nvmem-qnap-mcu-eeprom.o
+nvmem-qnap-mcu-eeprom-y			:= qnap-mcu-eeprom.o
+obj-$(CONFIG_NVMEM_RAVE_SP_EEPROM)	+= nvmem-rave-sp-eeprom.o
+nvmem-rave-sp-eeprom-y			:= rave-sp-eeprom.o
+obj-$(CONFIG_NVMEM_RCAR_EFUSE)		+= nvmem-rcar-efuse.o
+nvmem-rcar-efuse-y			:= rcar-efuse.o
+obj-$(CONFIG_NVMEM_RMEM) 		+= nvmem-rmem.o
+nvmem-rmem-y				:= rmem.o
+obj-$(CONFIG_NVMEM_ROCKCHIP_EFUSE)	+= nvmem_rockchip_efuse.o
+nvmem_rockchip_efuse-y			:= rockchip-efuse.o
+obj-$(CONFIG_NVMEM_ROCKCHIP_OTP)	+= nvmem-rockchip-otp.o
+nvmem-rockchip-otp-y			:= rockchip-otp.o
+obj-$(CONFIG_NVMEM_SC27XX_EFUSE)	+= nvmem-sc27xx-efuse.o
+nvmem-sc27xx-efuse-y			:= sc27xx-efuse.o
+obj-$(CONFIG_NVMEM_SNVS_LPGPR)		+= nvmem_snvs_lpgpr.o
+nvmem_snvs_lpgpr-y			:= snvs_lpgpr.o
+obj-$(CONFIG_NVMEM_SPMI_SDAM)		+= nvmem_qcom-spmi-sdam.o
+nvmem_qcom-spmi-sdam-y			+= qcom-spmi-sdam.o
+obj-$(CONFIG_NVMEM_SPRD_EFUSE)		+= nvmem_sprd_efuse.o
+nvmem_sprd_efuse-y			:= sprd-efuse.o
+obj-$(CONFIG_NVMEM_STM32_ROMEM)		+= nvmem_stm32_romem.o
+nvmem_stm32_romem-y 			:= stm32-romem.o
+nvmem_stm32_romem-$(CONFIG_NVMEM_STM32_BSEC_OPTEE_TA) += stm32-bsec-optee-ta.o
+obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP)	+= nvmem_sunplus_ocotp.o
+nvmem_sunplus_ocotp-y			:= sunplus-ocotp.o
+obj-$(CONFIG_NVMEM_SUNXI_SID)		+= nvmem_sunxi_sid.o
+nvmem_sunxi_sid-y			:= sunxi_sid.o
+obj-$(CONFIG_NVMEM_S32G_OCOTP)		+= nvmem-s32g-ocotp-nvmem.o
+nvmem-s32g-ocotp-nvmem-y		:= s32g-ocotp-nvmem.o
+obj-$(CONFIG_NVMEM_U_BOOT_ENV)		+= nvmem_u-boot-env.o
+nvmem_u-boot-env-y			:= u-boot-env.o
+obj-$(CONFIG_NVMEM_UNIPHIER_EFUSE)	+= nvmem-uniphier-efuse.o
+nvmem-uniphier-efuse-y			:= uniphier-efuse.o
+obj-$(CONFIG_NVMEM_VF610_OCOTP)		+= nvmem-vf610-ocotp.o
+nvmem-vf610-ocotp-y			:= vf610-ocotp.o
+obj-$(CONFIG_NVMEM_ZYNQMP)		+= nvmem_zynqmp_nvmem.o
+nvmem_zynqmp_nvmem-y			:= zynqmp_nvmem.o
+obj-$(CONFIG_NVMEM_QORIQ_EFUSE)		+= nvmem-qoriq-efuse.o
+nvmem-qoriq-efuse-y			:= qoriq-efuse.o
diff --git a/drivers/nvmem/airoha-smc-efuses.c b/drivers/nvmem/airoha-smc-efuses.c
new file mode 100644
index 000000000..e56a99f4a
--- /dev/null
+++ b/drivers/nvmem/airoha-smc-efuses.c
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Author: Christian Marangi <ansuelsmth@gmail.com>
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#define AIROHA_SMC_EFUSE_FID		0x82000001
+#define AIROHA_SMC_EFUSE_SUB_ID_READ	0x44414552
+
+#define AIROHA_EFUSE_CELLS		64
+
+struct airoha_efuse_bank_priv {
+	u32 bank_index;
+};
+
+static int airoha_efuse_read(void *context, unsigned int offset,
+			     void *val, size_t bytes)
+{
+	struct regmap *regmap = context;
+
+	return regmap_bulk_read(regmap, offset,
+				val, bytes / sizeof(u32));
+}
+
+static int airoha_efuse_reg_read(void *context, unsigned int offset,
+				 unsigned int *val)
+{
+	struct airoha_efuse_bank_priv *priv = context;
+	struct arm_smccc_res res;
+
+	arm_smccc_1_1_invoke(AIROHA_SMC_EFUSE_FID,
+			     AIROHA_SMC_EFUSE_SUB_ID_READ,
+			     priv->bank_index, offset, 0, 0, 0, 0, &res);
+
+	/* check if SMC reported an error */
+	if (res.a0)
+		return -EIO;
+
+	*val = res.a1;
+	return 0;
+}
+
+static int airoha_efuse_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	for_each_child_of_node_scoped(dev->of_node, child) {
+		struct nvmem_config nvmem_config = {
+			.size = AIROHA_EFUSE_CELLS * sizeof(u32),
+			.stride = sizeof(u32),
+			.word_size = sizeof(u32),
+			.reg_read = airoha_efuse_read,
+		};
+		struct regmap_config regmap_config = {
+			.reg_read = airoha_efuse_reg_read,
+			.reg_bits = 32,
+			.val_bits = 32,
+			.reg_stride = 4,
+		};
+		struct airoha_efuse_bank_priv *priv;
+		struct nvmem_device *nvmem;
+		struct regmap *regmap;
+		const char *name;
+		u32 bank;
+
+		ret = of_property_read_u32(child, "reg", &bank);
+		if (ret)
+			return ret;
+
+		priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+		if (!priv)
+			return -ENOMEM;
+
+		name = devm_kasprintf(dev, GFP_KERNEL, "airoha-efuse-%u",
+				      bank);
+		if (!name)
+			return -ENOMEM;
+
+		priv->bank_index = bank;
+
+		regmap_config.name = name;
+		regmap = devm_regmap_init(dev, NULL, priv,
+					  &regmap_config);
+		if (IS_ERR(regmap))
+			return PTR_ERR(regmap);
+
+		nvmem_config.name = name;
+		nvmem_config.priv = regmap;
+		nvmem_config.dev = dev;
+		nvmem_config.id = bank;
+		nvmem_config.of_node = child;
+		nvmem = devm_nvmem_register(dev, &nvmem_config);
+		if (IS_ERR(nvmem))
+			return PTR_ERR(nvmem);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id airoha_efuse_of_match[] = {
+	{ .compatible = "airoha,an7581-efuses", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, airoha_efuse_of_match);
+
+static struct platform_driver airoha_efuse_driver = {
+	.probe = airoha_efuse_probe,
+	.driver = {
+		.name = "airoha-efuse",
+		.of_match_table = airoha_efuse_of_match,
+	},
+};
+module_platform_driver(airoha_efuse_driver);
+
+MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>");
+MODULE_DESCRIPTION("Driver for Airoha SMC eFUSEs");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/an8855-efuse.c b/drivers/nvmem/an8855-efuse.c
new file mode 100644
index 000000000..ed0840f79
--- /dev/null
+++ b/drivers/nvmem/an8855-efuse.c
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Airoha AN8855 Switch EFUSE Driver
+ */
+
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define AN8855_EFUSE_CELL		50
+
+#define AN8855_EFUSE_DATA0		0x1000a500
+#define   AN8855_EFUSE_R50O		GENMASK(30, 24)
+
+static int an8855_efuse_read(void *context, unsigned int offset,
+			     void *val, size_t bytes)
+{
+	struct regmap *regmap = context;
+
+	return regmap_bulk_read(regmap, AN8855_EFUSE_DATA0 + offset,
+				val, bytes / sizeof(u32));
+}
+
+static int an8855_efuse_probe(struct platform_device *pdev)
+{
+	struct nvmem_config an8855_nvmem_config = {
+		.name = "an8855-efuse",
+		.size = AN8855_EFUSE_CELL * sizeof(u32),
+		.stride = sizeof(u32),
+		.word_size = sizeof(u32),
+		.reg_read = an8855_efuse_read,
+	};
+	struct device *dev = &pdev->dev;
+	struct nvmem_device *nvmem;
+	struct regmap *regmap;
+
+	/* Assign NVMEM priv to MFD regmap */
+	regmap = dev_get_regmap(dev->parent, NULL);
+	if (!regmap)
+		return -ENOENT;
+
+	an8855_nvmem_config.priv = regmap;
+	an8855_nvmem_config.dev = dev;
+	nvmem = devm_nvmem_register(dev, &an8855_nvmem_config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id an8855_efuse_of_match[] = {
+	{ .compatible = "airoha,an8855-efuse", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, an8855_efuse_of_match);
+
+static struct platform_driver an8855_efuse_driver = {
+	.probe = an8855_efuse_probe,
+	.driver = {
+		.name = "an8855-efuse",
+		.of_match_table = an8855_efuse_of_match,
+	},
+};
+module_platform_driver(an8855_efuse_driver);
+
+MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>");
+MODULE_DESCRIPTION("Driver for AN8855 Switch EFUSE");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/apple-efuses.c b/drivers/nvmem/apple-efuses.c
new file mode 100644
index 000000000..9913e77b8
--- /dev/null
+++ b/drivers/nvmem/apple-efuses.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Apple SoC eFuse driver
+ *
+ * Copyright (C) The Asahi Linux Contributors
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+
+struct apple_efuses_priv {
+	void __iomem *fuses;
+};
+
+static int apple_efuses_read(void *context, unsigned int offset, void *val,
+			     size_t bytes)
+{
+	struct apple_efuses_priv *priv = context;
+	u32 *dst = val;
+
+	while (bytes >= sizeof(u32)) {
+		*dst++ = readl_relaxed(priv->fuses + offset);
+		bytes -= sizeof(u32);
+		offset += sizeof(u32);
+	}
+
+	return 0;
+}
+
+static int apple_efuses_probe(struct platform_device *pdev)
+{
+	struct apple_efuses_priv *priv;
+	struct resource *res;
+	struct nvmem_config config = {
+		.dev = &pdev->dev,
+		.add_legacy_fixed_of_cells = true,
+		.read_only = true,
+		.reg_read = apple_efuses_read,
+		.stride = sizeof(u32),
+		.word_size = sizeof(u32),
+		.name = "apple_efuses_nvmem",
+		.id = NVMEM_DEVID_AUTO,
+		.root_only = true,
+	};
+
+	priv = devm_kzalloc(config.dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->fuses = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(priv->fuses))
+		return PTR_ERR(priv->fuses);
+
+	config.priv = priv;
+	config.size = resource_size(res);
+
+	return PTR_ERR_OR_ZERO(devm_nvmem_register(config.dev, &config));
+}
+
+static const struct of_device_id apple_efuses_of_match[] = {
+	{ .compatible = "apple,efuses", },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, apple_efuses_of_match);
+
+static struct platform_driver apple_efuses_driver = {
+	.driver = {
+		.name = "apple_efuses",
+		.of_match_table = apple_efuses_of_match,
+	},
+	.probe = apple_efuses_probe,
+};
+
+module_platform_driver(apple_efuses_driver);
+
+MODULE_AUTHOR("Sven Peter <sven@svenpeter.dev>");
+MODULE_DESCRIPTION("Apple SoC eFuse driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/apple-spmi-nvmem.c b/drivers/nvmem/apple-spmi-nvmem.c
new file mode 100644
index 000000000..7acb0c07d
--- /dev/null
+++ b/drivers/nvmem/apple-spmi-nvmem.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Apple SPMI NVMEM driver
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/spmi.h>
+#include <linux/regmap.h>
+
+static const struct regmap_config apple_spmi_regmap_config = {
+	.reg_bits	= 16,
+	.val_bits	= 8,
+	.max_register	= 0xffff,
+};
+
+static int apple_spmi_nvmem_read(void *priv, unsigned int offset, void *val,
+				 size_t bytes)
+{
+	struct regmap *map = priv;
+
+	return regmap_bulk_read(map, offset, val, bytes);
+}
+
+static int apple_spmi_nvmem_write(void *priv, unsigned int offset, void *val,
+				  size_t bytes)
+{
+	struct regmap *map = priv;
+
+	return regmap_bulk_write(map, offset, val, bytes);
+}
+
+static int apple_spmi_nvmem_probe(struct spmi_device *sdev)
+{
+	struct regmap *regmap;
+	struct nvmem_config nvmem_cfg = {
+		.dev = &sdev->dev,
+		.name = "spmi_nvmem",
+		.id = NVMEM_DEVID_AUTO,
+		.word_size = 1,
+		.stride = 1,
+		.size = 0xffff,
+		.reg_read = apple_spmi_nvmem_read,
+		.reg_write = apple_spmi_nvmem_write,
+	};
+
+	regmap = devm_regmap_init_spmi_ext(sdev, &apple_spmi_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	nvmem_cfg.priv = regmap;
+
+	return PTR_ERR_OR_ZERO(devm_nvmem_register(&sdev->dev, &nvmem_cfg));
+}
+
+static const struct of_device_id apple_spmi_nvmem_id_table[] = {
+	{ .compatible = "apple,spmi-nvmem" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, apple_spmi_nvmem_id_table);
+
+static struct spmi_driver apple_spmi_nvmem_driver = {
+	.probe = apple_spmi_nvmem_probe,
+	.driver = {
+		.name = "apple-spmi-nvmem",
+		.of_match_table	= apple_spmi_nvmem_id_table,
+	},
+};
+
+module_spmi_driver(apple_spmi_nvmem_driver);
+
+MODULE_LICENSE("Dual MIT/GPL");
+MODULE_AUTHOR("Hector Martin <marcan@marcan.st>");
+MODULE_DESCRIPTION("Apple SPMI NVMEM driver");
diff --git a/drivers/nvmem/at24.c b/drivers/nvmem/at24.c
new file mode 100644
index 000000000..772c4d9fa
--- /dev/null
+++ b/drivers/nvmem/at24.c
@@ -0,0 +1,871 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at24.c - handle most I2C EEPROMs
+ *
+ * Copyright (C) 2005-2007 David Brownell
+ * Copyright (C) 2008 Wolfram Sang, Pengutronix
+ */
+
+#include <linux/acpi.h>
+#include <linux/bitops.h>
+#include <linux/capability.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/nvmem-provider.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+/* Address pointer is 16 bit. */
+#define AT24_FLAG_ADDR16	BIT(7)
+/* sysfs-entry will be read-only. */
+#define AT24_FLAG_READONLY	BIT(6)
+/* sysfs-entry will be world-readable. */
+#define AT24_FLAG_IRUGO		BIT(5)
+/* Take always 8 addresses (24c00). */
+#define AT24_FLAG_TAKE8ADDR	BIT(4)
+/* Factory-programmed serial number. */
+#define AT24_FLAG_SERIAL	BIT(3)
+/* Factory-programmed mac address. */
+#define AT24_FLAG_MAC		BIT(2)
+/* Does not auto-rollover reads to the next slave address. */
+#define AT24_FLAG_NO_RDROL	BIT(1)
+
+/*
+ * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable.
+ * Differences between different vendor product lines (like Atmel AT24C or
+ * MicroChip 24LC, etc) won't much matter for typical read/write access.
+ * There are also I2C RAM chips, likewise interchangeable. One example
+ * would be the PCF8570, which acts like a 24c02 EEPROM (256 bytes).
+ *
+ * However, misconfiguration can lose data. "Set 16-bit memory address"
+ * to a part with 8-bit addressing will overwrite data. Writing with too
+ * big a page size also loses data. And it's not safe to assume that the
+ * conventional addresses 0x50..0x57 only hold eeproms; a PCF8563 RTC
+ * uses 0x51, for just one example.
+ *
+ * Accordingly, explicit board-specific configuration data should be used
+ * in almost all cases. (One partial exception is an SMBus used to access
+ * "SPD" data for DRAM sticks. Those only use 24c02 EEPROMs.)
+ *
+ * So this driver uses "new style" I2C driver binding, expecting to be
+ * told what devices exist. That may be in arch/X/mach-Y/board-Z.c or
+ * similar kernel-resident tables; or, configuration data coming from
+ * a bootloader.
+ *
+ * Other than binding model, current differences from "eeprom" driver are
+ * that this one handles write access and isn't restricted to 24c02 devices.
+ * It also handles larger devices (32 kbit and up) with two-byte addresses,
+ * which won't work on pure SMBus systems.
+ */
+
+struct at24_data {
+	/*
+	 * Lock protects against activities from other Linux tasks,
+	 * but not from changes by other I2C masters.
+	 */
+	struct mutex lock;
+
+	unsigned int write_max;
+	unsigned int num_addresses;
+	unsigned int offset_adj;
+
+	u32 byte_len;
+	u16 page_size;
+	u8 flags;
+
+	struct nvmem_device *nvmem;
+	struct regulator *vcc_reg;
+	void (*read_post)(unsigned int off, char *buf, size_t count);
+
+	/*
+	 * Some chips tie up multiple I2C addresses; dummy devices reserve
+	 * them for us.
+	 */
+	u8 bank_addr_shift;
+	struct regmap *client_regmaps[] __counted_by(num_addresses);
+};
+
+/*
+ * This parameter is to help this driver avoid blocking other drivers out
+ * of I2C for potentially troublesome amounts of time. With a 100 kHz I2C
+ * clock, one 256 byte read takes about 1/43 second which is excessive;
+ * but the 1/170 second it takes at 400 kHz may be quite reasonable; and
+ * at 1 MHz (Fm+) a 1/430 second delay could easily be invisible.
+ *
+ * This value is forced to be a power of two so that writes align on pages.
+ */
+static unsigned int at24_io_limit = 128;
+module_param_named(io_limit, at24_io_limit, uint, 0);
+MODULE_PARM_DESC(at24_io_limit, "Maximum bytes per I/O (default 128)");
+
+/*
+ * Specs often allow 5 msec for a page write, sometimes 20 msec;
+ * it's important to recover from write timeouts.
+ */
+static unsigned int at24_write_timeout = 25;
+module_param_named(write_timeout, at24_write_timeout, uint, 0);
+MODULE_PARM_DESC(at24_write_timeout, "Time (in ms) to try writes (default 25)");
+
+struct at24_chip_data {
+	u32 byte_len;
+	u8 flags;
+	u8 bank_addr_shift;
+	void (*read_post)(unsigned int off, char *buf, size_t count);
+};
+
+#define AT24_CHIP_DATA(_name, _len, _flags)				\
+	static const struct at24_chip_data _name = {			\
+		.byte_len = _len, .flags = _flags,			\
+	}
+
+#define AT24_CHIP_DATA_CB(_name, _len, _flags, _read_post)		\
+	static const struct at24_chip_data _name = {			\
+		.byte_len = _len, .flags = _flags,			\
+		.read_post = _read_post,				\
+	}
+
+#define AT24_CHIP_DATA_BS(_name, _len, _flags, _bank_addr_shift)	\
+	static const struct at24_chip_data _name = {			\
+		.byte_len = _len, .flags = _flags,			\
+		.bank_addr_shift = _bank_addr_shift			\
+	}
+
+static void at24_read_post_vaio(unsigned int off, char *buf, size_t count)
+{
+	int i;
+
+	if (capable(CAP_SYS_ADMIN))
+		return;
+
+	/*
+	 * Hide VAIO private settings to regular users:
+	 * - BIOS passwords: bytes 0x00 to 0x0f
+	 * - UUID: bytes 0x10 to 0x1f
+	 * - Serial number: 0xc0 to 0xdf
+	 */
+	for (i = 0; i < count; i++) {
+		if ((off + i <= 0x1f) ||
+		    (off + i >= 0xc0 && off + i <= 0xdf))
+			buf[i] = 0;
+	}
+}
+
+/* needs 8 addresses as A0-A2 are ignored */
+AT24_CHIP_DATA(at24_data_24c00, 128 / 8, AT24_FLAG_TAKE8ADDR);
+/* old variants can't be handled with this generic entry! */
+AT24_CHIP_DATA(at24_data_24c01, 1024 / 8, 0);
+AT24_CHIP_DATA(at24_data_24cs01, 16,
+	AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
+AT24_CHIP_DATA(at24_data_24c02, 2048 / 8, 0);
+AT24_CHIP_DATA(at24_data_24cs02, 16,
+	AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
+AT24_CHIP_DATA(at24_data_24mac402, 48 / 8,
+	AT24_FLAG_MAC | AT24_FLAG_READONLY);
+AT24_CHIP_DATA(at24_data_24mac602, 64 / 8,
+	AT24_FLAG_MAC | AT24_FLAG_READONLY);
+AT24_CHIP_DATA(at24_data_24aa025e48, 48 / 8,
+	AT24_FLAG_READONLY);
+AT24_CHIP_DATA(at24_data_24aa025e64, 64 / 8,
+	AT24_FLAG_READONLY);
+/* spd is a 24c02 in memory DIMMs */
+AT24_CHIP_DATA(at24_data_spd, 2048 / 8,
+	AT24_FLAG_READONLY | AT24_FLAG_IRUGO);
+/* 24c02_vaio is a 24c02 on some Sony laptops */
+AT24_CHIP_DATA_CB(at24_data_24c02_vaio, 2048 / 8,
+	AT24_FLAG_READONLY | AT24_FLAG_IRUGO,
+	at24_read_post_vaio);
+AT24_CHIP_DATA(at24_data_24c04, 4096 / 8, 0);
+AT24_CHIP_DATA(at24_data_24cs04, 16,
+	AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
+/* 24rf08 quirk is handled at i2c-core */
+AT24_CHIP_DATA(at24_data_24c08, 8192 / 8, 0);
+AT24_CHIP_DATA(at24_data_24cs08, 16,
+	AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
+AT24_CHIP_DATA(at24_data_24c16, 16384 / 8, 0);
+AT24_CHIP_DATA(at24_data_24cs16, 16,
+	AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
+AT24_CHIP_DATA(at24_data_24c32, 32768 / 8, AT24_FLAG_ADDR16);
+/* M24C32-D Additional Write lockable page (M24C32-D order codes) */
+AT24_CHIP_DATA(at24_data_24c32d_wlp, 32, AT24_FLAG_ADDR16);
+AT24_CHIP_DATA(at24_data_24cs32, 16,
+	AT24_FLAG_ADDR16 | AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
+AT24_CHIP_DATA(at24_data_24c64, 65536 / 8, AT24_FLAG_ADDR16);
+/* M24C64-D Additional Write lockable page (M24C64-D order codes) */
+AT24_CHIP_DATA(at24_data_24c64d_wlp, 32, AT24_FLAG_ADDR16);
+AT24_CHIP_DATA(at24_data_24cs64, 16,
+	AT24_FLAG_ADDR16 | AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
+AT24_CHIP_DATA(at24_data_24c128, 131072 / 8, AT24_FLAG_ADDR16);
+AT24_CHIP_DATA(at24_data_24c256, 262144 / 8, AT24_FLAG_ADDR16);
+/* M24256E Additional Write lockable page (M24256E-F order codes) */
+AT24_CHIP_DATA(at24_data_24256e_wlp, 64, AT24_FLAG_ADDR16);
+AT24_CHIP_DATA(at24_data_24c512, 524288 / 8, AT24_FLAG_ADDR16);
+AT24_CHIP_DATA(at24_data_24c1024, 1048576 / 8, AT24_FLAG_ADDR16);
+AT24_CHIP_DATA_BS(at24_data_24c1025, 1048576 / 8, AT24_FLAG_ADDR16, 2);
+AT24_CHIP_DATA(at24_data_24c2048, 2097152 / 8, AT24_FLAG_ADDR16);
+/* identical to 24c08 ? */
+AT24_CHIP_DATA(at24_data_INT3499, 8192 / 8, 0);
+
+static const struct i2c_device_id at24_ids[] = {
+	{ .name = "24c00",	.driver_data = (kernel_ulong_t)&at24_data_24c00 },
+	{ .name = "24c01",	.driver_data = (kernel_ulong_t)&at24_data_24c01 },
+	{ .name = "24cs01",	.driver_data = (kernel_ulong_t)&at24_data_24cs01 },
+	{ .name = "24c02",	.driver_data = (kernel_ulong_t)&at24_data_24c02 },
+	{ .name = "24cs02",	.driver_data = (kernel_ulong_t)&at24_data_24cs02 },
+	{ .name = "24mac402",	.driver_data = (kernel_ulong_t)&at24_data_24mac402 },
+	{ .name = "24mac602",	.driver_data = (kernel_ulong_t)&at24_data_24mac602 },
+	{ .name = "24aa025e48",	.driver_data = (kernel_ulong_t)&at24_data_24aa025e48 },
+	{ .name = "24aa025e64",	.driver_data = (kernel_ulong_t)&at24_data_24aa025e64 },
+	{ .name = "spd",	.driver_data = (kernel_ulong_t)&at24_data_spd },
+	{ .name = "24c02-vaio",	.driver_data = (kernel_ulong_t)&at24_data_24c02_vaio },
+	{ .name = "24c04",	.driver_data = (kernel_ulong_t)&at24_data_24c04 },
+	{ .name = "24cs04",	.driver_data = (kernel_ulong_t)&at24_data_24cs04 },
+	{ .name = "24c08",	.driver_data = (kernel_ulong_t)&at24_data_24c08 },
+	{ .name = "24cs08",	.driver_data = (kernel_ulong_t)&at24_data_24cs08 },
+	{ .name = "24c16",	.driver_data = (kernel_ulong_t)&at24_data_24c16 },
+	{ .name = "24cs16",	.driver_data = (kernel_ulong_t)&at24_data_24cs16 },
+	{ .name = "24c32",	.driver_data = (kernel_ulong_t)&at24_data_24c32 },
+	{ .name = "24c32d-wl",	.driver_data = (kernel_ulong_t)&at24_data_24c32d_wlp },
+	{ .name = "24cs32",	.driver_data = (kernel_ulong_t)&at24_data_24cs32 },
+	{ .name = "24c64",	.driver_data = (kernel_ulong_t)&at24_data_24c64 },
+	{ .name = "24c64-wl",	.driver_data = (kernel_ulong_t)&at24_data_24c64d_wlp },
+	{ .name = "24cs64",	.driver_data = (kernel_ulong_t)&at24_data_24cs64 },
+	{ .name = "24c128",	.driver_data = (kernel_ulong_t)&at24_data_24c128 },
+	{ .name = "24c256",	.driver_data = (kernel_ulong_t)&at24_data_24c256 },
+	{ .name = "24256e-wl",	.driver_data = (kernel_ulong_t)&at24_data_24256e_wlp },
+	{ .name = "24c512",	.driver_data = (kernel_ulong_t)&at24_data_24c512 },
+	{ .name = "24c1024",	.driver_data = (kernel_ulong_t)&at24_data_24c1024 },
+	{ .name = "24c1025",	.driver_data = (kernel_ulong_t)&at24_data_24c1025 },
+	{ .name = "24c2048",	.driver_data = (kernel_ulong_t)&at24_data_24c2048 },
+	{ .name = "at24",	.driver_data = 0 },
+	{ /* END OF LIST */ }
+};
+MODULE_DEVICE_TABLE(i2c, at24_ids);
+
+static const struct of_device_id at24_of_match[] = {
+	{ .compatible = "atmel,24c00",		.data = &at24_data_24c00 },
+	{ .compatible = "atmel,24c01",		.data = &at24_data_24c01 },
+	{ .compatible = "atmel,24cs01",		.data = &at24_data_24cs01 },
+	{ .compatible = "atmel,24c02",		.data = &at24_data_24c02 },
+	{ .compatible = "atmel,24cs02",		.data = &at24_data_24cs02 },
+	{ .compatible = "atmel,24mac402",	.data = &at24_data_24mac402 },
+	{ .compatible = "atmel,24mac602",	.data = &at24_data_24mac602 },
+	{ .compatible = "atmel,spd",		.data = &at24_data_spd },
+	{ .compatible = "atmel,24c04",		.data = &at24_data_24c04 },
+	{ .compatible = "atmel,24cs04",		.data = &at24_data_24cs04 },
+	{ .compatible = "atmel,24c08",		.data = &at24_data_24c08 },
+	{ .compatible = "atmel,24cs08",		.data = &at24_data_24cs08 },
+	{ .compatible = "atmel,24c16",		.data = &at24_data_24c16 },
+	{ .compatible = "atmel,24cs16",		.data = &at24_data_24cs16 },
+	{ .compatible = "atmel,24c32",		.data = &at24_data_24c32 },
+	{ .compatible = "atmel,24c32d-wl",	.data = &at24_data_24c32d_wlp },
+	{ .compatible = "atmel,24cs32",		.data = &at24_data_24cs32 },
+	{ .compatible = "atmel,24c64",		.data = &at24_data_24c64 },
+	{ .compatible = "atmel,24c64d-wl",	.data = &at24_data_24c64d_wlp },
+	{ .compatible = "atmel,24cs64",		.data = &at24_data_24cs64 },
+	{ .compatible = "atmel,24c128",		.data = &at24_data_24c128 },
+	{ .compatible = "atmel,24c256",		.data = &at24_data_24c256 },
+	{ .compatible = "atmel,24c512",		.data = &at24_data_24c512 },
+	{ .compatible = "atmel,24c1024",	.data = &at24_data_24c1024 },
+	{ .compatible = "atmel,24c1025",	.data = &at24_data_24c1025 },
+	{ .compatible = "atmel,24c2048",	.data = &at24_data_24c2048 },
+	{ .compatible = "microchip,24aa025e48",	.data = &at24_data_24aa025e48 },
+	{ .compatible = "microchip,24aa025e64",	.data = &at24_data_24aa025e64 },
+	{ .compatible = "st,24256e-wl",		.data = &at24_data_24256e_wlp },
+	{ /* END OF LIST */ },
+};
+MODULE_DEVICE_TABLE(of, at24_of_match);
+
+static const struct acpi_device_id at24_acpi_ids[] = {
+	{ "INT3499",	(kernel_ulong_t)&at24_data_INT3499 },
+	{ "TPF0001",	(kernel_ulong_t)&at24_data_24c1024 },
+	{ /* END OF LIST */ }
+};
+MODULE_DEVICE_TABLE(acpi, at24_acpi_ids);
+
+/*
+ * This routine supports chips which consume multiple I2C addresses. It
+ * computes the addressing information to be used for a given r/w request.
+ * Assumes that sanity checks for offset happened at sysfs-layer.
+ *
+ * Slave address and byte offset derive from the offset. Always
+ * set the byte address; on a multi-master board, another master
+ * may have changed the chip's "current" address pointer.
+ */
+static struct regmap *at24_translate_offset(struct at24_data *at24,
+					    unsigned int *offset)
+{
+	unsigned int i;
+
+	if (at24->flags & AT24_FLAG_ADDR16) {
+		i = *offset >> 16;
+		*offset &= 0xffff;
+	} else {
+		i = *offset >> 8;
+		*offset &= 0xff;
+	}
+
+	return at24->client_regmaps[i];
+}
+
+static struct device *at24_base_client_dev(struct at24_data *at24)
+{
+	return regmap_get_device(at24->client_regmaps[0]);
+}
+
+static size_t at24_adjust_read_count(struct at24_data *at24,
+				      unsigned int offset, size_t count)
+{
+	unsigned int bits;
+	size_t remainder;
+
+	/*
+	 * In case of multi-address chips that don't rollover reads to
+	 * the next slave address: truncate the count to the slave boundary,
+	 * so that the read never straddles slaves.
+	 */
+	if (at24->flags & AT24_FLAG_NO_RDROL) {
+		bits = (at24->flags & AT24_FLAG_ADDR16) ? 16 : 8;
+		remainder = BIT(bits) - offset;
+		if (count > remainder)
+			count = remainder;
+	}
+
+	if (count > at24_io_limit)
+		count = at24_io_limit;
+
+	return count;
+}
+
+static ssize_t at24_regmap_read(struct at24_data *at24, char *buf,
+				unsigned int offset, size_t count)
+{
+	unsigned long timeout, read_time;
+	struct regmap *regmap;
+	int ret;
+
+	regmap = at24_translate_offset(at24, &offset);
+	count = at24_adjust_read_count(at24, offset, count);
+
+	/* adjust offset for mac and serial read ops */
+	offset += at24->offset_adj;
+
+	timeout = jiffies + msecs_to_jiffies(at24_write_timeout);
+	do {
+		/*
+		 * The timestamp shall be taken before the actual operation
+		 * to avoid a premature timeout in case of high CPU load.
+		 */
+		read_time = jiffies;
+
+		ret = regmap_bulk_read(regmap, offset, buf, count);
+		dev_dbg(regmap_get_device(regmap), "read %zu@%d --> %d (%ld)\n",
+			count, offset, ret, jiffies);
+		if (!ret)
+			return count;
+
+		usleep_range(1000, 1500);
+	} while (time_before(read_time, timeout));
+
+	return -ETIMEDOUT;
+}
+
+/*
+ * Note that if the hardware write-protect pin is pulled high, the whole
+ * chip is normally write protected. But there are plenty of product
+ * variants here, including OTP fuses and partial chip protect.
+ *
+ * We only use page mode writes; the alternative is sloooow. These routines
+ * write at most one page.
+ */
+
+static size_t at24_adjust_write_count(struct at24_data *at24,
+				      unsigned int offset, size_t count)
+{
+	unsigned int next_page;
+
+	/* write_max is at most a page */
+	if (count > at24->write_max)
+		count = at24->write_max;
+
+	/* Never roll over backwards, to the start of this page */
+	next_page = roundup(offset + 1, at24->page_size);
+	if (offset + count > next_page)
+		count = next_page - offset;
+
+	return count;
+}
+
+static ssize_t at24_regmap_write(struct at24_data *at24, const char *buf,
+				 unsigned int offset, size_t count)
+{
+	unsigned long timeout, write_time;
+	struct regmap *regmap;
+	int ret;
+
+	regmap = at24_translate_offset(at24, &offset);
+	count = at24_adjust_write_count(at24, offset, count);
+	timeout = jiffies + msecs_to_jiffies(at24_write_timeout);
+
+	do {
+		/*
+		 * The timestamp shall be taken before the actual operation
+		 * to avoid a premature timeout in case of high CPU load.
+		 */
+		write_time = jiffies;
+
+		ret = regmap_bulk_write(regmap, offset, buf, count);
+		dev_dbg(regmap_get_device(regmap), "write %zu@%d --> %d (%ld)\n",
+			count, offset, ret, jiffies);
+		if (!ret)
+			return count;
+
+		usleep_range(1000, 1500);
+	} while (time_before(write_time, timeout));
+
+	return -ETIMEDOUT;
+}
+
+static int at24_read(void *priv, unsigned int off, void *val, size_t count)
+{
+	struct at24_data *at24;
+	struct device *dev;
+	char *buf = val;
+	int i, ret;
+
+	at24 = priv;
+	dev = at24_base_client_dev(at24);
+
+	if (unlikely(!count))
+		return count;
+
+	if (off + count > at24->byte_len)
+		return -EINVAL;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret)
+		return ret;
+	/*
+	 * Read data from chip, protecting against concurrent updates
+	 * from this host, but not from other I2C masters.
+	 */
+	mutex_lock(&at24->lock);
+
+	for (i = 0; count; i += ret, count -= ret) {
+		ret = at24_regmap_read(at24, buf + i, off + i, count);
+		if (ret < 0) {
+			mutex_unlock(&at24->lock);
+			pm_runtime_put(dev);
+			return ret;
+		}
+	}
+
+	mutex_unlock(&at24->lock);
+
+	pm_runtime_put(dev);
+
+	if (unlikely(at24->read_post))
+		at24->read_post(off, buf, i);
+
+	return 0;
+}
+
+static int at24_write(void *priv, unsigned int off, void *val, size_t count)
+{
+	struct at24_data *at24;
+	struct device *dev;
+	char *buf = val;
+	int ret;
+
+	at24 = priv;
+	dev = at24_base_client_dev(at24);
+
+	if (unlikely(!count))
+		return -EINVAL;
+
+	if (off + count > at24->byte_len)
+		return -EINVAL;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret)
+		return ret;
+	/*
+	 * Write data to chip, protecting against concurrent updates
+	 * from this host, but not from other I2C masters.
+	 */
+	mutex_lock(&at24->lock);
+
+	while (count) {
+		ret = at24_regmap_write(at24, buf, off, count);
+		if (ret < 0) {
+			mutex_unlock(&at24->lock);
+			pm_runtime_put(dev);
+			return ret;
+		}
+		buf += ret;
+		off += ret;
+		count -= ret;
+	}
+
+	mutex_unlock(&at24->lock);
+
+	pm_runtime_put(dev);
+
+	return 0;
+}
+
+static int at24_make_dummy_client(struct at24_data *at24, unsigned int index,
+				  struct i2c_client *base_client,
+				  struct regmap_config *regmap_config)
+{
+	struct i2c_client *dummy_client;
+	struct regmap *regmap;
+
+	dummy_client = devm_i2c_new_dummy_device(&base_client->dev,
+						 base_client->adapter,
+						 base_client->addr +
+						 (index << at24->bank_addr_shift));
+	if (IS_ERR(dummy_client))
+		return PTR_ERR(dummy_client);
+
+	regmap = devm_regmap_init_i2c(dummy_client, regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	at24->client_regmaps[index] = regmap;
+
+	return 0;
+}
+
+static unsigned int at24_get_offset_adj(u8 flags, unsigned int byte_len)
+{
+	if (flags & AT24_FLAG_MAC) {
+		/* EUI-48 starts from 0x9a, EUI-64 from 0x98 */
+		return 0xa0 - byte_len;
+	} else if (flags & AT24_FLAG_SERIAL && flags & AT24_FLAG_ADDR16) {
+		/*
+		 * For 16 bit address pointers, the word address must contain
+		 * a '10' sequence in bits 11 and 10 regardless of the
+		 * intended position of the address pointer.
+		 */
+		return 0x0800;
+	} else if (flags & AT24_FLAG_SERIAL) {
+		/*
+		 * Otherwise the word address must begin with a '10' sequence,
+		 * regardless of the intended address.
+		 */
+		return 0x0080;
+	} else {
+		return 0;
+	}
+}
+
+static void at24_probe_temp_sensor(struct i2c_client *client)
+{
+	struct at24_data *at24 = i2c_get_clientdata(client);
+	struct i2c_board_info info = { .type = "jc42" };
+	int ret;
+	u8 val;
+
+	/*
+	 * Byte 2 has value 11 for DDR3, earlier versions don't
+	 * support the thermal sensor present flag
+	 */
+	ret = at24_read(at24, 2, &val, 1);
+	if (ret || val != 11)
+		return;
+
+	/* Byte 32, bit 7 is set if temp sensor is present */
+	ret = at24_read(at24, 32, &val, 1);
+	if (ret || !(val & BIT(7)))
+		return;
+
+	info.addr = 0x18 | (client->addr & 7);
+
+	i2c_new_client_device(client->adapter, &info);
+}
+
+static int at24_probe(struct i2c_client *client)
+{
+	struct regmap_config regmap_config = { };
+	struct nvmem_config nvmem_config = { };
+	u32 byte_len, page_size, flags, addrw;
+	const struct at24_chip_data *cdata;
+	struct device *dev = &client->dev;
+	bool i2c_fn_i2c, i2c_fn_block;
+	unsigned int i, num_addresses;
+	struct at24_data *at24;
+	bool full_power;
+	struct regmap *regmap;
+	bool writable;
+	u8 test_byte;
+	int err;
+
+	i2c_fn_i2c = i2c_check_functionality(client->adapter, I2C_FUNC_I2C);
+	i2c_fn_block = i2c_check_functionality(client->adapter,
+					       I2C_FUNC_SMBUS_WRITE_I2C_BLOCK);
+
+	cdata = i2c_get_match_data(client);
+	if (!cdata)
+		return -ENODEV;
+
+	err = device_property_read_u32(dev, "pagesize", &page_size);
+	if (err)
+		/*
+		 * This is slow, but we can't know all eeproms, so we better
+		 * play safe. Specifying custom eeprom-types via device tree
+		 * or properties is recommended anyhow.
+		 */
+		page_size = 1;
+
+	flags = cdata->flags;
+	if (device_property_present(dev, "read-only"))
+		flags |= AT24_FLAG_READONLY;
+	if (device_property_present(dev, "no-read-rollover"))
+		flags |= AT24_FLAG_NO_RDROL;
+
+	err = device_property_read_u32(dev, "address-width", &addrw);
+	if (!err) {
+		switch (addrw) {
+		case 8:
+			if (flags & AT24_FLAG_ADDR16)
+				dev_warn(dev,
+					 "Override address width to be 8, while default is 16\n");
+			flags &= ~AT24_FLAG_ADDR16;
+			break;
+		case 16:
+			flags |= AT24_FLAG_ADDR16;
+			break;
+		default:
+			dev_warn(dev, "Bad \"address-width\" property: %u\n",
+				 addrw);
+		}
+	}
+
+	err = device_property_read_u32(dev, "size", &byte_len);
+	if (err)
+		byte_len = cdata->byte_len;
+
+	if (!i2c_fn_i2c && !i2c_fn_block)
+		page_size = 1;
+
+	if (!page_size)
+		return dev_err_probe(dev, -EINVAL, "page_size must not be 0!\n");
+
+	if (!is_power_of_2(page_size))
+		dev_warn(dev, "page_size looks suspicious (no power of 2)!\n");
+
+	err = device_property_read_u32(dev, "num-addresses", &num_addresses);
+	if (err) {
+		if (flags & AT24_FLAG_TAKE8ADDR)
+			num_addresses = 8;
+		else
+			num_addresses =	DIV_ROUND_UP(byte_len,
+				(flags & AT24_FLAG_ADDR16) ? 65536 : 256);
+	}
+
+	if ((flags & AT24_FLAG_SERIAL) && (flags & AT24_FLAG_MAC))
+		return dev_err_probe(dev, -EINVAL,
+				     "invalid device data - cannot have both AT24_FLAG_SERIAL & AT24_FLAG_MAC.");
+
+	regmap_config.val_bits = 8;
+	regmap_config.reg_bits = (flags & AT24_FLAG_ADDR16) ? 16 : 8;
+	regmap_config.disable_locking = true;
+
+	regmap = devm_regmap_init_i2c(client, &regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	at24 = devm_kzalloc(dev, struct_size(at24, client_regmaps, num_addresses),
+			    GFP_KERNEL);
+	if (!at24)
+		return -ENOMEM;
+
+	mutex_init(&at24->lock);
+	at24->byte_len = byte_len;
+	at24->page_size = page_size;
+	at24->flags = flags;
+	at24->read_post = cdata->read_post;
+	at24->bank_addr_shift = cdata->bank_addr_shift;
+	at24->num_addresses = num_addresses;
+	at24->offset_adj = at24_get_offset_adj(flags, byte_len);
+	at24->client_regmaps[0] = regmap;
+
+	at24->vcc_reg = devm_regulator_get(dev, "vcc");
+	if (IS_ERR(at24->vcc_reg))
+		return PTR_ERR(at24->vcc_reg);
+
+	writable = !(flags & AT24_FLAG_READONLY);
+	if (writable) {
+		at24->write_max = min_t(unsigned int,
+					page_size, at24_io_limit);
+		if (!i2c_fn_i2c && at24->write_max > I2C_SMBUS_BLOCK_MAX)
+			at24->write_max = I2C_SMBUS_BLOCK_MAX;
+	}
+
+	/* use dummy devices for multiple-address chips */
+	for (i = 1; i < num_addresses; i++) {
+		err = at24_make_dummy_client(at24, i, client, &regmap_config);
+		if (err)
+			return err;
+	}
+
+	/*
+	 * We initialize nvmem_config.id to NVMEM_DEVID_AUTO even if the
+	 * label property is set as some platform can have multiple eeproms
+	 * with same label and we can not register each of those with same
+	 * label. Failing to register those eeproms trigger cascade failure
+	 * on such platform.
+	 */
+	nvmem_config.id = NVMEM_DEVID_AUTO;
+
+	if (device_property_present(dev, "label")) {
+		err = device_property_read_string(dev, "label",
+						  &nvmem_config.name);
+		if (err)
+			return err;
+	} else {
+		nvmem_config.name = dev_name(dev);
+	}
+
+	nvmem_config.type = NVMEM_TYPE_EEPROM;
+	nvmem_config.dev = dev;
+	nvmem_config.read_only = !writable;
+	nvmem_config.root_only = !(flags & AT24_FLAG_IRUGO);
+	nvmem_config.owner = THIS_MODULE;
+	nvmem_config.compat = true;
+	nvmem_config.base_dev = dev;
+	nvmem_config.reg_read = at24_read;
+	nvmem_config.reg_write = at24_write;
+	nvmem_config.priv = at24;
+	nvmem_config.stride = 1;
+	nvmem_config.word_size = 1;
+	nvmem_config.size = byte_len;
+
+	i2c_set_clientdata(client, at24);
+
+	full_power = acpi_dev_state_d0(&client->dev);
+	if (full_power) {
+		err = regulator_enable(at24->vcc_reg);
+		if (err)
+			return dev_err_probe(dev, err, "Failed to enable vcc regulator\n");
+
+		pm_runtime_set_active(dev);
+	}
+	pm_runtime_enable(dev);
+
+	/*
+	 * Perform a one-byte test read to verify that the chip is functional,
+	 * unless powering on the device is to be avoided during probe (i.e.
+	 * it's powered off right now).
+	 */
+	if (full_power) {
+		err = at24_read(at24, 0, &test_byte, 1);
+		if (err) {
+			pm_runtime_disable(dev);
+			if (!pm_runtime_status_suspended(dev))
+				regulator_disable(at24->vcc_reg);
+			return -ENODEV;
+		}
+	}
+
+	at24->nvmem = devm_nvmem_register(dev, &nvmem_config);
+	if (IS_ERR(at24->nvmem)) {
+		pm_runtime_disable(dev);
+		if (!pm_runtime_status_suspended(dev))
+			regulator_disable(at24->vcc_reg);
+		return dev_err_probe(dev, PTR_ERR(at24->nvmem),
+				     "failed to register nvmem\n");
+	}
+
+	/* If this a SPD EEPROM, probe for DDR3 thermal sensor */
+	if (cdata == &at24_data_spd)
+		at24_probe_temp_sensor(client);
+
+	pm_runtime_idle(dev);
+
+	if (writable)
+		dev_info(dev, "%u byte %s EEPROM, writable, %u bytes/write\n",
+			 byte_len, client->name, at24->write_max);
+	else
+		dev_info(dev, "%u byte %s EEPROM, read-only\n",
+			 byte_len, client->name);
+
+	return 0;
+}
+
+static void at24_remove(struct i2c_client *client)
+{
+	struct at24_data *at24 = i2c_get_clientdata(client);
+
+	pm_runtime_disable(&client->dev);
+	if (acpi_dev_state_d0(&client->dev)) {
+		if (!pm_runtime_status_suspended(&client->dev))
+			regulator_disable(at24->vcc_reg);
+		pm_runtime_set_suspended(&client->dev);
+	}
+}
+
+static int __maybe_unused at24_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct at24_data *at24 = i2c_get_clientdata(client);
+
+	return regulator_disable(at24->vcc_reg);
+}
+
+static int __maybe_unused at24_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct at24_data *at24 = i2c_get_clientdata(client);
+
+	return regulator_enable(at24->vcc_reg);
+}
+
+static const struct dev_pm_ops at24_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(at24_suspend, at24_resume, NULL)
+};
+
+static struct i2c_driver at24_driver = {
+	.driver = {
+		.name = "at24",
+		.pm = &at24_pm_ops,
+		.of_match_table = at24_of_match,
+		.acpi_match_table = at24_acpi_ids,
+	},
+	.probe = at24_probe,
+	.remove = at24_remove,
+	.id_table = at24_ids,
+	.flags = I2C_DRV_ACPI_WAIVE_D0_PROBE,
+};
+
+static int __init at24_init(void)
+{
+	if (!at24_io_limit) {
+		pr_err("at24: at24_io_limit must not be 0!\n");
+		return -EINVAL;
+	}
+
+	at24_io_limit = rounddown_pow_of_two(at24_io_limit);
+	return i2c_add_driver(&at24_driver);
+}
+module_init(at24_init);
+
+static void __exit at24_exit(void)
+{
+	i2c_del_driver(&at24_driver);
+}
+module_exit(at24_exit);
+
+MODULE_DESCRIPTION("Driver for most I2C EEPROMs");
+MODULE_AUTHOR("David Brownell and Wolfram Sang");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/at25.c b/drivers/nvmem/at25.c
new file mode 100644
index 000000000..bc2cfb75d
--- /dev/null
+++ b/drivers/nvmem/at25.c
@@ -0,0 +1,585 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for most of the SPI EEPROMs, such as Atmel AT25 models
+ * and Cypress FRAMs FM25 models.
+ *
+ * Copyright (C) 2006 David Brownell
+ */
+
+#include <linux/bits.h>
+#include <linux/cleanup.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include <linux/spi/eeprom.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
+
+#include <linux/nvmem-provider.h>
+
+/*
+ * NOTE: this is an *EEPROM* driver. The vagaries of product naming
+ * mean that some AT25 products are EEPROMs, and others are FLASH.
+ * Handle FLASH chips with the drivers/mtd/devices/m25p80.c driver,
+ * not this one!
+ *
+ * EEPROMs that can be used with this driver include, for example:
+ *   AT25M02, AT25128B
+ */
+
+#define	FM25_SN_LEN	8		/* serial number length */
+#define	FM25_MAX_ID_LEN	9		/* ID length */
+#define EE_MAXADDRLEN	3		/* 24 bit addresses, up to 2 MBytes */
+
+struct at25_data {
+	struct spi_eeprom	chip;
+	struct spi_mem		*spimem;
+	struct mutex		lock;
+	unsigned		addrlen;
+	struct nvmem_config	nvmem_config;
+	struct nvmem_device	*nvmem;
+	u8 sernum[FM25_SN_LEN];
+	u8 id[FM25_MAX_ID_LEN];
+	u8 id_len;
+};
+
+#define	AT25_WREN	0x06		/* latch the write enable */
+#define	AT25_WRDI	0x04		/* reset the write enable */
+#define	AT25_RDSR	0x05		/* read status register */
+#define	AT25_WRSR	0x01		/* write status register */
+#define	AT25_READ	0x03		/* read byte(s) */
+#define	AT25_WRITE	0x02		/* write byte(s)/sector */
+#define	FM25_SLEEP	0xb9		/* enter sleep mode */
+#define	FM25_RDID	0x9f		/* read device ID */
+#define	FM25_RDSN	0xc3		/* read S/N */
+
+#define	AT25_SR_nRDY	0x01		/* nRDY = write-in-progress */
+#define	AT25_SR_WEN	0x02		/* write enable (latched) */
+#define	AT25_SR_BP0	0x04		/* BP for software writeprotect */
+#define	AT25_SR_BP1	0x08
+#define	AT25_SR_WPEN	0x80		/* writeprotect enable */
+
+#define	AT25_INSTR_BIT3	0x08		/* additional address bit in instr */
+
+/*
+ * Specs often allow 5ms for a page write, sometimes 20ms;
+ * it's important to recover from write timeouts.
+ */
+#define	EE_TIMEOUT	25
+
+/*-------------------------------------------------------------------------*/
+
+#define	io_limit	PAGE_SIZE	/* bytes */
+
+/* Handle the address MSB as part of instruction byte */
+static u8 at25_instr(struct at25_data *at25, u8 instr, unsigned int off)
+{
+	if (!(at25->chip.flags & EE_INSTR_BIT3_IS_ADDR))
+		return instr;
+	if (off < BIT(at25->addrlen * 8))
+		return instr;
+	return instr | AT25_INSTR_BIT3;
+}
+
+static int at25_ee_read(void *priv, unsigned int offset,
+			void *val, size_t count)
+{
+	u8 *bounce __free(kfree) = kmalloc(min(count, io_limit), GFP_KERNEL);
+	struct at25_data *at25 = priv;
+	char *buf = val;
+	unsigned int msg_offset = offset;
+	size_t bytes_left = count;
+	size_t segment;
+	int status;
+
+	if (!bounce)
+		return -ENOMEM;
+
+	if (unlikely(offset >= at25->chip.byte_len))
+		return -EINVAL;
+	if ((offset + count) > at25->chip.byte_len)
+		count = at25->chip.byte_len - offset;
+	if (unlikely(!count))
+		return -EINVAL;
+
+	do {
+		struct spi_mem_op op;
+
+		segment = min(bytes_left, io_limit);
+
+		op = (struct spi_mem_op)SPI_MEM_OP(SPI_MEM_OP_CMD(at25_instr(at25, AT25_READ,
+									     msg_offset), 1),
+						   SPI_MEM_OP_ADDR(at25->addrlen, msg_offset, 1),
+						   SPI_MEM_OP_NO_DUMMY,
+						   SPI_MEM_OP_DATA_IN(segment, bounce, 1));
+
+		status = spi_mem_adjust_op_size(at25->spimem, &op);
+		if (status)
+			return status;
+		segment = op.data.nbytes;
+
+		mutex_lock(&at25->lock);
+		status = spi_mem_exec_op(at25->spimem, &op);
+		mutex_unlock(&at25->lock);
+		if (status)
+			return status;
+		memcpy(buf, bounce, segment);
+
+		msg_offset += segment;
+		buf += segment;
+		bytes_left -= segment;
+	} while (bytes_left > 0);
+
+	dev_dbg(&at25->spimem->spi->dev, "read %zu bytes at %d\n",
+		count, offset);
+	return 0;
+}
+
+/*
+ * Read extra registers as ID or serial number
+ *
+ * Allow for the callers to provide @buf on stack (not necessary DMA-capable)
+ * by allocating a bounce buffer internally.
+ */
+static int fm25_aux_read(struct at25_data *at25, u8 *buf, uint8_t command,
+			 int len)
+{
+	u8 *bounce __free(kfree) = kmalloc(len, GFP_KERNEL);
+	struct spi_mem_op op;
+	int status;
+
+	if (!bounce)
+		return -ENOMEM;
+
+	op = (struct spi_mem_op)SPI_MEM_OP(SPI_MEM_OP_CMD(command, 1),
+					   SPI_MEM_OP_NO_ADDR,
+					   SPI_MEM_OP_NO_DUMMY,
+					   SPI_MEM_OP_DATA_IN(len, bounce, 1));
+
+	status = spi_mem_exec_op(at25->spimem, &op);
+	dev_dbg(&at25->spimem->spi->dev, "read %d aux bytes --> %d\n", len, status);
+	if (status)
+		return status;
+
+	memcpy(buf, bounce, len);
+
+	return 0;
+}
+
+static ssize_t sernum_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct at25_data *at25;
+
+	at25 = dev_get_drvdata(dev);
+	return sysfs_emit(buf, "%*ph\n", (int)sizeof(at25->sernum), at25->sernum);
+}
+static DEVICE_ATTR_RO(sernum);
+
+static ssize_t jedec_id_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct at25_data *at25;
+
+	at25 = dev_get_drvdata(dev);
+
+	if (!at25->id_len)
+		return -EOPNOTSUPP;
+
+	return sysfs_emit(buf, "%*phN\n", at25->id_len, at25->id);
+}
+static DEVICE_ATTR_RO(jedec_id);
+
+static struct attribute *at25_attrs[] = {
+	&dev_attr_sernum.attr,
+	&dev_attr_jedec_id.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(at25);
+
+/*
+ * Poll Read Status Register with timeout
+ *
+ * Return:
+ * 0, if the chip is ready
+ * [positive] Status Register value as-is, if the chip is busy
+ * [negative] error code in case of read failure
+ */
+static int at25_wait_ready(struct at25_data *at25)
+{
+	u8 *bounce __free(kfree) = kmalloc(1, GFP_KERNEL);
+	struct spi_mem_op op;
+	int status;
+
+	if (!bounce)
+		return -ENOMEM;
+
+	op = (struct spi_mem_op)SPI_MEM_OP(SPI_MEM_OP_CMD(AT25_RDSR, 1),
+					   SPI_MEM_OP_NO_ADDR,
+					   SPI_MEM_OP_NO_DUMMY,
+					   SPI_MEM_OP_DATA_IN(1, bounce, 1));
+
+	read_poll_timeout(spi_mem_exec_op, status,
+			  status || !(bounce[0] & AT25_SR_nRDY), false,
+			  USEC_PER_MSEC, USEC_PER_MSEC * EE_TIMEOUT,
+			  at25->spimem, &op);
+	if (status < 0)
+		return status;
+	if (!(bounce[0] & AT25_SR_nRDY))
+		return 0;
+
+	return bounce[0];
+}
+
+static int at25_ee_write(void *priv, unsigned int off, void *val, size_t count)
+{
+	u8 *bounce __free(kfree) = kmalloc(min(count, io_limit), GFP_KERNEL);
+	struct at25_data *at25 = priv;
+	const char *buf = val;
+	unsigned int buf_size;
+	int status;
+
+	if (unlikely(off >= at25->chip.byte_len))
+		return -EFBIG;
+	if ((off + count) > at25->chip.byte_len)
+		count = at25->chip.byte_len - off;
+	if (unlikely(!count))
+		return -EINVAL;
+
+	buf_size = at25->chip.page_size;
+
+	if (!bounce)
+		return -ENOMEM;
+
+	/*
+	 * For write, rollover is within the page ... so we write at
+	 * most one page, then manually roll over to the next page.
+	 */
+	guard(mutex)(&at25->lock);
+	do {
+		struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(AT25_WREN, 1),
+						  SPI_MEM_OP_NO_ADDR,
+						  SPI_MEM_OP_NO_DUMMY,
+						  SPI_MEM_OP_NO_DATA);
+		unsigned int segment;
+
+		status = spi_mem_exec_op(at25->spimem, &op);
+		if (status < 0) {
+			dev_dbg(&at25->spimem->spi->dev, "WREN --> %d\n", status);
+			return status;
+		}
+
+		/* Write as much of a page as we can */
+		segment = buf_size - (off % buf_size);
+		if (segment > count)
+			segment = count;
+		if (segment > io_limit)
+			segment = io_limit;
+
+		op = (struct spi_mem_op)SPI_MEM_OP(SPI_MEM_OP_CMD(at25_instr(at25, AT25_WRITE, off),
+								  1),
+						   SPI_MEM_OP_ADDR(at25->addrlen, off, 1),
+						   SPI_MEM_OP_NO_DUMMY,
+						   SPI_MEM_OP_DATA_OUT(segment, bounce, 1));
+
+		status = spi_mem_adjust_op_size(at25->spimem, &op);
+		if (status)
+			return status;
+		segment = op.data.nbytes;
+
+		memcpy(bounce, buf, segment);
+
+		status = spi_mem_exec_op(at25->spimem, &op);
+		dev_dbg(&at25->spimem->spi->dev, "write %u bytes at %u --> %d\n",
+			segment, off, status);
+		if (status)
+			return status;
+
+		/*
+		 * REVISIT this should detect (or prevent) failed writes
+		 * to read-only sections of the EEPROM...
+		 */
+
+		status = at25_wait_ready(at25);
+		if (status < 0) {
+			dev_err_probe(&at25->spimem->spi->dev, status,
+				      "Read Status Redister command failed\n");
+			return status;
+		}
+		if (status) {
+			dev_dbg(&at25->spimem->spi->dev,
+				"Status %02x\n", status);
+			dev_err(&at25->spimem->spi->dev,
+				"write %u bytes offset %u, timeout after %u msecs\n",
+				segment, off, EE_TIMEOUT);
+			return -ETIMEDOUT;
+		}
+
+		off += segment;
+		buf += segment;
+		count -= segment;
+
+	} while (count > 0);
+
+	return status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int at25_fw_to_chip(struct device *dev, struct spi_eeprom *chip)
+{
+	u32 val;
+	int err;
+
+	strscpy(chip->name, "at25", sizeof(chip->name));
+
+	err = device_property_read_u32(dev, "size", &val);
+	if (err)
+		err = device_property_read_u32(dev, "at25,byte-len", &val);
+	if (err) {
+		dev_err(dev, "Error: missing \"size\" property\n");
+		return err;
+	}
+	chip->byte_len = val;
+
+	err = device_property_read_u32(dev, "pagesize", &val);
+	if (err)
+		err = device_property_read_u32(dev, "at25,page-size", &val);
+	if (err) {
+		dev_err(dev, "Error: missing \"pagesize\" property\n");
+		return err;
+	}
+	chip->page_size = val;
+
+	err = device_property_read_u32(dev, "address-width", &val);
+	if (err) {
+		err = device_property_read_u32(dev, "at25,addr-mode", &val);
+		if (err) {
+			dev_err(dev, "Error: missing \"address-width\" property\n");
+			return err;
+		}
+		chip->flags = (u16)val;
+	} else {
+		switch (val) {
+		case 9:
+			chip->flags |= EE_INSTR_BIT3_IS_ADDR;
+			fallthrough;
+		case 8:
+			chip->flags |= EE_ADDR1;
+			break;
+		case 16:
+			chip->flags |= EE_ADDR2;
+			break;
+		case 24:
+			chip->flags |= EE_ADDR3;
+			break;
+		default:
+			dev_err(dev,
+				"Error: bad \"address-width\" property: %u\n",
+				val);
+			return -ENODEV;
+		}
+		if (device_property_present(dev, "read-only"))
+			chip->flags |= EE_READONLY;
+	}
+	return 0;
+}
+
+static int at25_fram_to_chip(struct device *dev, struct spi_eeprom *chip)
+{
+	struct at25_data *at25 = container_of(chip, struct at25_data, chip);
+	u8 sernum[FM25_SN_LEN];
+	u8 id[FM25_MAX_ID_LEN];
+	u32 val;
+	int i;
+
+	strscpy(chip->name, "fm25", sizeof(chip->name));
+
+	if (!device_property_read_u32(dev, "size", &val)) {
+		chip->byte_len = val;
+	} else {
+		/* Get ID of chip */
+		fm25_aux_read(at25, id, FM25_RDID, FM25_MAX_ID_LEN);
+
+		/* Store the unprocessed ID for exposing via sysfs */
+		memcpy(at25->id, id, FM25_MAX_ID_LEN);
+		at25->id_len = FM25_MAX_ID_LEN;
+
+		/* There are inside-out FRAM variations, detect them and reverse the ID bytes */
+		if (id[6] == 0x7f && id[2] == 0xc2)
+			for (i = 0; i < ARRAY_SIZE(id) / 2; i++) {
+				u8 tmp = id[i];
+				int j = ARRAY_SIZE(id) - i - 1;
+
+				id[i] = id[j];
+				id[j] = tmp;
+			}
+
+		if (id[6] == 0xc2) {
+			at25->id_len = 9;
+			switch (id[7]) {
+			case 0x21 ... 0x26:
+				chip->byte_len = BIT(id[7] - 0x21 + 4) * 1024;
+				break;
+			case 0x2a ... 0x30:
+				/* CY15B102QN ... CY15B116QN */
+				chip->byte_len = BIT(((id[7] >> 1) & 0xf) + 13);
+				break;
+			default:
+				dev_err(dev, "Error: unsupported size (id %02x)\n", id[7]);
+				return -ENODEV;
+			}
+		} else if (id[2] == 0x82 && id[3] == 0x06) {
+			at25->id_len = 8;
+			switch (id[1]) {
+			case 0x51 ... 0x54:
+				/* CY15B102QSN ... CY15B204QSN */
+				chip->byte_len = BIT(((id[0] >> 3) & 0x1F) + 9);
+				break;
+			default:
+				dev_err(dev, "Error: unsupported product id %02x\n", id[1]);
+				return -ENODEV;
+			}
+		} else {
+			dev_err(dev, "Error: unrecognized JEDEC ID format: %*ph\n",
+				FM25_MAX_ID_LEN, id);
+			return -ENODEV;
+		}
+
+		fm25_aux_read(at25, sernum, FM25_RDSN, FM25_SN_LEN);
+		/* Swap byte order */
+		for (i = 0; i < FM25_SN_LEN; i++)
+			at25->sernum[i] = sernum[FM25_SN_LEN - 1 - i];
+	}
+
+	if (chip->byte_len > 64 * 1024)
+		chip->flags |= EE_ADDR3;
+	else
+		chip->flags |= EE_ADDR2;
+
+	chip->page_size = PAGE_SIZE;
+	return 0;
+}
+
+static const struct of_device_id at25_of_match[] = {
+	{ .compatible = "atmel,at25" },
+	{ .compatible = "cypress,fm25" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, at25_of_match);
+
+static const struct spi_device_id at25_spi_ids[] = {
+	{ .name = "at25" },
+	{ .name = "fm25" },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, at25_spi_ids);
+
+static int at25_probe(struct spi_mem *mem)
+{
+	struct spi_device *spi = mem->spi;
+	struct spi_eeprom *pdata;
+	struct at25_data *at25;
+	bool is_fram;
+	int err;
+
+	at25 = devm_kzalloc(&spi->dev, sizeof(*at25), GFP_KERNEL);
+	if (!at25)
+		return -ENOMEM;
+
+	at25->spimem = mem;
+
+	/*
+	 * Ping the chip ... the status register is pretty portable,
+	 * unlike probing manufacturer IDs.
+	 */
+	err = at25_wait_ready(at25);
+	if (err < 0)
+		return dev_err_probe(&spi->dev, err, "Read Status Register command failed\n");
+	if (err) {
+		dev_err(&spi->dev, "Not ready (%02x)\n", err);
+		return -ENXIO;
+	}
+
+	mutex_init(&at25->lock);
+	spi_set_drvdata(spi, at25);
+
+	is_fram = fwnode_device_is_compatible(dev_fwnode(&spi->dev), "cypress,fm25");
+
+	/* Chip description */
+	pdata = dev_get_platdata(&spi->dev);
+	if (pdata) {
+		at25->chip = *pdata;
+	} else {
+		if (is_fram)
+			err = at25_fram_to_chip(&spi->dev, &at25->chip);
+		else
+			err = at25_fw_to_chip(&spi->dev, &at25->chip);
+		if (err)
+			return err;
+	}
+
+	/* For now we only support 8/16/24 bit addressing */
+	if (at25->chip.flags & EE_ADDR1)
+		at25->addrlen = 1;
+	else if (at25->chip.flags & EE_ADDR2)
+		at25->addrlen = 2;
+	else if (at25->chip.flags & EE_ADDR3)
+		at25->addrlen = 3;
+	else {
+		dev_dbg(&spi->dev, "unsupported address type\n");
+		return -EINVAL;
+	}
+
+	at25->nvmem_config.type = is_fram ? NVMEM_TYPE_FRAM : NVMEM_TYPE_EEPROM;
+	at25->nvmem_config.name = dev_name(&spi->dev);
+	at25->nvmem_config.dev = &spi->dev;
+	at25->nvmem_config.read_only = at25->chip.flags & EE_READONLY;
+	at25->nvmem_config.root_only = true;
+	at25->nvmem_config.owner = THIS_MODULE;
+	at25->nvmem_config.compat = true;
+	at25->nvmem_config.base_dev = &spi->dev;
+	at25->nvmem_config.reg_read = at25_ee_read;
+	at25->nvmem_config.reg_write = at25_ee_write;
+	at25->nvmem_config.priv = at25;
+	at25->nvmem_config.stride = 1;
+	at25->nvmem_config.word_size = 1;
+	at25->nvmem_config.size = at25->chip.byte_len;
+
+	at25->nvmem = devm_nvmem_register(&spi->dev, &at25->nvmem_config);
+	if (IS_ERR(at25->nvmem))
+		return PTR_ERR(at25->nvmem);
+
+	dev_info(&spi->dev, "%d %s %s %s%s, pagesize %u\n",
+		 (at25->chip.byte_len < 1024) ?
+			at25->chip.byte_len : (at25->chip.byte_len / 1024),
+		 (at25->chip.byte_len < 1024) ? "Byte" : "KByte",
+		 at25->chip.name, is_fram ? "fram" : "eeprom",
+		 (at25->chip.flags & EE_READONLY) ? " (readonly)" : "",
+		 at25->chip.page_size);
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct spi_mem_driver at25_driver = {
+	.spidrv = {
+		.driver = {
+			.name		= "at25",
+			.of_match_table = at25_of_match,
+			.dev_groups	= at25_groups,
+		},
+		.id_table	= at25_spi_ids,
+	},
+	.probe		= at25_probe,
+};
+
+module_spi_mem_driver(at25_driver);
+
+MODULE_DESCRIPTION("Driver for most SPI EEPROMs");
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/bcm-ocotp.c b/drivers/nvmem/bcm-ocotp.c
new file mode 100644
index 000000000..2490f44ca
--- /dev/null
+++ b/drivers/nvmem/bcm-ocotp.c
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2016 Broadcom
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+/*
+ * # of tries for OTP Status. The time to execute a command varies. The slowest
+ * commands are writes which also vary based on the # of bits turned on. Writing
+ * 0xffffffff takes ~3800 us.
+ */
+#define OTPC_RETRIES                 5000
+
+/* Sequence to enable OTP program */
+#define OTPC_PROG_EN_SEQ             { 0xf, 0x4, 0x8, 0xd }
+
+/* OTPC Commands */
+#define OTPC_CMD_READ                0x0
+#define OTPC_CMD_OTP_PROG_ENABLE     0x2
+#define OTPC_CMD_OTP_PROG_DISABLE    0x3
+#define OTPC_CMD_PROGRAM             0x8
+
+/* OTPC Status Bits */
+#define OTPC_STAT_CMD_DONE           BIT(1)
+#define OTPC_STAT_PROG_OK            BIT(2)
+
+/* OTPC register definition */
+#define OTPC_MODE_REG_OFFSET         0x0
+#define OTPC_MODE_REG_OTPC_MODE      0
+#define OTPC_COMMAND_OFFSET          0x4
+#define OTPC_COMMAND_COMMAND_WIDTH   6
+#define OTPC_CMD_START_OFFSET        0x8
+#define OTPC_CMD_START_START         0
+#define OTPC_CPU_STATUS_OFFSET       0xc
+#define OTPC_CPUADDR_REG_OFFSET      0x28
+#define OTPC_CPUADDR_REG_OTPC_CPU_ADDRESS_WIDTH 16
+#define OTPC_CPU_WRITE_REG_OFFSET    0x2c
+
+#define OTPC_CMD_MASK  (BIT(OTPC_COMMAND_COMMAND_WIDTH) - 1)
+#define OTPC_ADDR_MASK (BIT(OTPC_CPUADDR_REG_OTPC_CPU_ADDRESS_WIDTH) - 1)
+
+
+struct otpc_map {
+	/* in words. */
+	u32 otpc_row_size;
+	/* 128 bit row / 4 words support. */
+	u16 data_r_offset[4];
+	/* 128 bit row / 4 words support. */
+	u16 data_w_offset[4];
+};
+
+static struct otpc_map otp_map = {
+	.otpc_row_size = 1,
+	.data_r_offset = {0x10},
+	.data_w_offset = {0x2c},
+};
+
+static struct otpc_map otp_map_v2 = {
+	.otpc_row_size = 2,
+	.data_r_offset = {0x10, 0x5c},
+	.data_w_offset = {0x2c, 0x64},
+};
+
+struct otpc_priv {
+	struct device *dev;
+	void __iomem *base;
+	const struct otpc_map *map;
+	struct nvmem_config *config;
+};
+
+static inline void set_command(void __iomem *base, u32 command)
+{
+	writel(command & OTPC_CMD_MASK, base + OTPC_COMMAND_OFFSET);
+}
+
+static inline void set_cpu_address(void __iomem *base, u32 addr)
+{
+	writel(addr & OTPC_ADDR_MASK, base + OTPC_CPUADDR_REG_OFFSET);
+}
+
+static inline void set_start_bit(void __iomem *base)
+{
+	writel(1 << OTPC_CMD_START_START, base + OTPC_CMD_START_OFFSET);
+}
+
+static inline void reset_start_bit(void __iomem *base)
+{
+	writel(0, base + OTPC_CMD_START_OFFSET);
+}
+
+static inline void write_cpu_data(void __iomem *base, u32 value)
+{
+	writel(value, base + OTPC_CPU_WRITE_REG_OFFSET);
+}
+
+static int poll_cpu_status(void __iomem *base, u32 value)
+{
+	u32 status;
+	u32 retries;
+
+	for (retries = 0; retries < OTPC_RETRIES; retries++) {
+		status = readl(base + OTPC_CPU_STATUS_OFFSET);
+		if (status & value)
+			break;
+		udelay(1);
+	}
+	if (retries == OTPC_RETRIES)
+		return -EAGAIN;
+
+	return 0;
+}
+
+static int enable_ocotp_program(void __iomem *base)
+{
+	static const u32 vals[] = OTPC_PROG_EN_SEQ;
+	int i;
+	int ret;
+
+	/* Write the magic sequence to enable programming */
+	set_command(base, OTPC_CMD_OTP_PROG_ENABLE);
+	for (i = 0; i < ARRAY_SIZE(vals); i++) {
+		write_cpu_data(base, vals[i]);
+		set_start_bit(base);
+		ret = poll_cpu_status(base, OTPC_STAT_CMD_DONE);
+		reset_start_bit(base);
+		if (ret)
+			return ret;
+	}
+
+	return poll_cpu_status(base, OTPC_STAT_PROG_OK);
+}
+
+static int disable_ocotp_program(void __iomem *base)
+{
+	int ret;
+
+	set_command(base, OTPC_CMD_OTP_PROG_DISABLE);
+	set_start_bit(base);
+	ret = poll_cpu_status(base, OTPC_STAT_PROG_OK);
+	reset_start_bit(base);
+
+	return ret;
+}
+
+static int bcm_otpc_read(void *context, unsigned int offset, void *val,
+	size_t bytes)
+{
+	struct otpc_priv *priv = context;
+	u32 *buf = val;
+	u32 bytes_read;
+	u32 address = offset / priv->config->word_size;
+	int i, ret;
+
+	for (bytes_read = 0; bytes_read < bytes;) {
+		set_command(priv->base, OTPC_CMD_READ);
+		set_cpu_address(priv->base, address++);
+		set_start_bit(priv->base);
+		ret = poll_cpu_status(priv->base, OTPC_STAT_CMD_DONE);
+		if (ret) {
+			dev_err(priv->dev, "otp read error: 0x%x", ret);
+			return -EIO;
+		}
+
+		for (i = 0; i < priv->map->otpc_row_size; i++) {
+			*buf++ = readl(priv->base +
+					priv->map->data_r_offset[i]);
+			bytes_read += sizeof(*buf);
+		}
+
+		reset_start_bit(priv->base);
+	}
+
+	return 0;
+}
+
+static int bcm_otpc_write(void *context, unsigned int offset, void *val,
+	size_t bytes)
+{
+	struct otpc_priv *priv = context;
+	u32 *buf = val;
+	u32 bytes_written;
+	u32 address = offset / priv->config->word_size;
+	int i, ret;
+
+	if (offset % priv->config->word_size)
+		return -EINVAL;
+
+	ret = enable_ocotp_program(priv->base);
+	if (ret)
+		return -EIO;
+
+	for (bytes_written = 0; bytes_written < bytes;) {
+		set_command(priv->base, OTPC_CMD_PROGRAM);
+		set_cpu_address(priv->base, address++);
+		for (i = 0; i < priv->map->otpc_row_size; i++) {
+			writel(*buf, priv->base + priv->map->data_w_offset[i]);
+			buf++;
+			bytes_written += sizeof(*buf);
+		}
+		set_start_bit(priv->base);
+		ret = poll_cpu_status(priv->base, OTPC_STAT_CMD_DONE);
+		reset_start_bit(priv->base);
+		if (ret) {
+			dev_err(priv->dev, "otp write error: 0x%x", ret);
+			return -EIO;
+		}
+	}
+
+	disable_ocotp_program(priv->base);
+
+	return 0;
+}
+
+static struct nvmem_config bcm_otpc_nvmem_config = {
+	.name = "bcm-ocotp",
+	.read_only = false,
+	.word_size = 4,
+	.stride = 4,
+	.reg_read = bcm_otpc_read,
+	.reg_write = bcm_otpc_write,
+};
+
+static const struct of_device_id bcm_otpc_dt_ids[] = {
+	{ .compatible = "brcm,ocotp", .data = &otp_map },
+	{ .compatible = "brcm,ocotp-v2", .data = &otp_map_v2 },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bcm_otpc_dt_ids);
+
+static const struct acpi_device_id bcm_otpc_acpi_ids[] __maybe_unused = {
+	{ .id = "BRCM0700", .driver_data = (kernel_ulong_t)&otp_map },
+	{ .id = "BRCM0701", .driver_data = (kernel_ulong_t)&otp_map_v2 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(acpi, bcm_otpc_acpi_ids);
+
+static int bcm_otpc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct otpc_priv *priv;
+	struct nvmem_device *nvmem;
+	int err;
+	u32 num_words;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->map = device_get_match_data(dev);
+	if (!priv->map)
+		return -ENODEV;
+
+	/* Get OTP base address register. */
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base)) {
+		dev_err(dev, "unable to map I/O memory\n");
+		return PTR_ERR(priv->base);
+	}
+
+	/* Enable CPU access to OTPC. */
+	writel(readl(priv->base + OTPC_MODE_REG_OFFSET) |
+		BIT(OTPC_MODE_REG_OTPC_MODE),
+		priv->base + OTPC_MODE_REG_OFFSET);
+	reset_start_bit(priv->base);
+
+	/* Read size of memory in words. */
+	err = device_property_read_u32(dev, "brcm,ocotp-size", &num_words);
+	if (err) {
+		dev_err(dev, "size parameter not specified\n");
+		return -EINVAL;
+	} else if (num_words == 0) {
+		dev_err(dev, "size must be > 0\n");
+		return -EINVAL;
+	}
+
+	bcm_otpc_nvmem_config.size = 4 * num_words;
+	bcm_otpc_nvmem_config.dev = dev;
+	bcm_otpc_nvmem_config.priv = priv;
+
+	if (priv->map == &otp_map_v2) {
+		bcm_otpc_nvmem_config.word_size = 8;
+		bcm_otpc_nvmem_config.stride = 8;
+	}
+
+	priv->config = &bcm_otpc_nvmem_config;
+
+	nvmem = devm_nvmem_register(dev, &bcm_otpc_nvmem_config);
+	if (IS_ERR(nvmem)) {
+		dev_err(dev, "error registering nvmem config\n");
+		return PTR_ERR(nvmem);
+	}
+
+	return 0;
+}
+
+static struct platform_driver bcm_otpc_driver = {
+	.probe	= bcm_otpc_probe,
+	.driver = {
+		.name	= "brcm-otpc",
+		.of_match_table = bcm_otpc_dt_ids,
+		.acpi_match_table = ACPI_PTR(bcm_otpc_acpi_ids),
+	},
+};
+module_platform_driver(bcm_otpc_driver);
+
+MODULE_DESCRIPTION("Broadcom OTPC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/brcm_nvram.c b/drivers/nvmem/brcm_nvram.c
new file mode 100644
index 000000000..9f77aee37
--- /dev/null
+++ b/drivers/nvmem/brcm_nvram.c
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <linux/bcm47xx_nvram.h>
+#include <linux/etherdevice.h>
+#include <linux/hex.h>
+#include <linux/if_ether.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define NVRAM_MAGIC			"FLSH"
+
+/**
+ * struct brcm_nvram - driver state internal struct
+ *
+ * @dev:		NVMEM device pointer
+ * @nvmem_size:		Size of the whole space available for NVRAM
+ * @data:		NVRAM data copy stored to avoid poking underlying flash controller
+ * @data_len:		NVRAM data size
+ * @padding_byte:	Padding value used to fill remaining space
+ * @cells:		Array of discovered NVMEM cells
+ * @ncells:		Number of elements in cells
+ */
+struct brcm_nvram {
+	struct device *dev;
+	size_t nvmem_size;
+	uint8_t *data;
+	size_t data_len;
+	uint8_t padding_byte;
+	struct nvmem_cell_info *cells;
+	int ncells;
+};
+
+struct brcm_nvram_header {
+	char magic[4];
+	__le32 len;
+	__le32 crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:31 sdram_init */
+	__le32 config_refresh;	/* 0:15 sdram_config, 16:31 sdram_refresh */
+	__le32 config_ncdl;	/* ncdl values for memc */
+};
+
+static int brcm_nvram_read(void *context, unsigned int offset, void *val,
+			   size_t bytes)
+{
+	struct brcm_nvram *priv = context;
+	size_t to_copy;
+
+	if (offset + bytes > priv->data_len)
+		to_copy = max_t(ssize_t, (ssize_t)priv->data_len - offset, 0);
+	else
+		to_copy = bytes;
+
+	memcpy(val, priv->data + offset, to_copy);
+
+	memset((uint8_t *)val + to_copy, priv->padding_byte, bytes - to_copy);
+
+	return 0;
+}
+
+static int brcm_nvram_copy_data(struct brcm_nvram *priv, struct platform_device *pdev)
+{
+	struct resource *res;
+	void __iomem *base;
+
+	base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->nvmem_size = resource_size(res);
+
+	priv->padding_byte = readb(base + priv->nvmem_size - 1);
+	for (priv->data_len = priv->nvmem_size;
+	     priv->data_len;
+	     priv->data_len--) {
+		if (readb(base + priv->data_len - 1) != priv->padding_byte)
+			break;
+	}
+	WARN(priv->data_len > SZ_128K, "Unexpected (big) NVRAM size: %zu B\n", priv->data_len);
+
+	if (priv->data_len < sizeof(struct brcm_nvram_header)) {
+		dev_err(priv->dev, "NVRAM data too small (%zu)\n", priv->data_len);
+		return -EINVAL;
+	}
+
+	priv->data = devm_kzalloc(priv->dev, priv->data_len, GFP_KERNEL);
+	if (!priv->data)
+		return -ENOMEM;
+
+	memcpy_fromio(priv->data, base, priv->data_len);
+
+	bcm47xx_nvram_init_from_iomem(base, priv->data_len);
+
+	return 0;
+}
+
+static int brcm_nvram_read_post_process_macaddr(void *context, const char *id, int index,
+						unsigned int offset, void *buf, size_t bytes)
+{
+	u8 mac[ETH_ALEN];
+
+	if (bytes != MAC_ADDR_STR_LEN)
+		return -EINVAL;
+
+	if (!mac_pton(buf, mac))
+		return -EINVAL;
+
+	if (index)
+		eth_addr_add(mac, index);
+
+	ether_addr_copy(buf, mac);
+
+	return 0;
+}
+
+static int brcm_nvram_add_cells(struct brcm_nvram *priv, uint8_t *data,
+				size_t len)
+{
+	struct device *dev = priv->dev;
+	char *var, *value;
+	uint8_t tmp;
+	int idx;
+	int err = 0;
+
+	tmp = priv->data[len - 1];
+	priv->data[len - 1] = '\0';
+
+	priv->ncells = 0;
+	for (var = data + sizeof(struct brcm_nvram_header);
+	     var < (char *)data + len && *var;
+	     var += strlen(var) + 1) {
+		priv->ncells++;
+	}
+
+	priv->cells = devm_kcalloc(dev, priv->ncells, sizeof(*priv->cells), GFP_KERNEL);
+	if (!priv->cells) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	for (var = data + sizeof(struct brcm_nvram_header), idx = 0;
+	     var < (char *)data + len && *var;
+	     var = value + strlen(value) + 1, idx++) {
+		char *eq, *name;
+
+		eq = strchr(var, '=');
+		if (!eq)
+			break;
+		*eq = '\0';
+		name = devm_kstrdup(dev, var, GFP_KERNEL);
+		*eq = '=';
+		if (!name) {
+			err = -ENOMEM;
+			goto out;
+		}
+		value = eq + 1;
+
+		priv->cells[idx].name = name;
+		priv->cells[idx].offset = value - (char *)data;
+		priv->cells[idx].bytes = strlen(value);
+		priv->cells[idx].np = of_get_child_by_name(dev->of_node, priv->cells[idx].name);
+		if (!strcmp(name, "et0macaddr") ||
+		    !strcmp(name, "et1macaddr") ||
+		    !strcmp(name, "et2macaddr")) {
+			priv->cells[idx].raw_len = strlen(value);
+			priv->cells[idx].bytes = ETH_ALEN;
+			priv->cells[idx].read_post_process = brcm_nvram_read_post_process_macaddr;
+		}
+	}
+
+out:
+	priv->data[len - 1] = tmp;
+	return err;
+}
+
+static int brcm_nvram_parse(struct brcm_nvram *priv)
+{
+	struct brcm_nvram_header *header = (struct brcm_nvram_header *)priv->data;
+	struct device *dev = priv->dev;
+	size_t len;
+	int err;
+
+	if (memcmp(header->magic, NVRAM_MAGIC, 4)) {
+		dev_err(dev, "Invalid NVRAM magic\n");
+		return -EINVAL;
+	}
+
+	len = le32_to_cpu(header->len);
+	if (len < sizeof(*header)) {
+		dev_err(dev, "NVRAM length (%zd) too small\n", len);
+		return -EINVAL;
+	}
+	if (len > priv->data_len) {
+		dev_err(dev, "NVRAM length (%zd) exceeds data size (%zd)\n", len,
+			priv->data_len);
+		return -EINVAL;
+	}
+
+	err = brcm_nvram_add_cells(priv, priv->data, len);
+	if (err)
+		dev_err(dev, "Failed to add cells: %d\n", err);
+
+	return 0;
+}
+
+static int brcm_nvram_probe(struct platform_device *pdev)
+{
+	struct nvmem_config config = {
+		.name = "brcm-nvram",
+		.reg_read = brcm_nvram_read,
+	};
+	struct device *dev = &pdev->dev;
+	struct brcm_nvram *priv;
+	int err;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->dev = dev;
+
+	err = brcm_nvram_copy_data(priv, pdev);
+	if (err)
+		return err;
+
+	err = brcm_nvram_parse(priv);
+	if (err)
+		return err;
+
+	config.dev = dev;
+	config.cells = priv->cells;
+	config.ncells = priv->ncells;
+	config.priv = priv;
+	config.size = priv->nvmem_size;
+
+	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &config));
+}
+
+static const struct of_device_id brcm_nvram_of_match_table[] = {
+	{ .compatible = "brcm,nvram", },
+	{},
+};
+
+static struct platform_driver brcm_nvram_driver = {
+	.probe = brcm_nvram_probe,
+	.driver = {
+		.name = "brcm_nvram",
+		.of_match_table = brcm_nvram_of_match_table,
+	},
+};
+
+static int __init brcm_nvram_init(void)
+{
+	return platform_driver_register(&brcm_nvram_driver);
+}
+
+subsys_initcall_sync(brcm_nvram_init);
+
+MODULE_AUTHOR("Rafał Miłecki");
+MODULE_DESCRIPTION("Broadcom I/O-mapped NVRAM support driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, brcm_nvram_of_match_table);
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
new file mode 100644
index 000000000..0556d1401
--- /dev/null
+++ b/drivers/nvmem/core.c
@@ -0,0 +1,2179 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * nvmem framework core.
+ *
+ * Copyright (C) 2015 Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+ * Copyright (C) 2013 Maxime Ripard <maxime.ripard@free-electrons.com>
+ */
+
+#include <linux/cleanup.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/fs.h>
+#include <linux/idr.h>
+#include <linux/init.h>
+#include <linux/kref.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+
+#include "internals.h"
+
+#define to_nvmem_device(d) container_of(d, struct nvmem_device, dev)
+
+#define FLAG_COMPAT		BIT(0)
+struct nvmem_cell_entry {
+	const char		*name;
+	int			offset;
+	size_t			raw_len;
+	int			bytes;
+	int			bit_offset;
+	int			nbits;
+	nvmem_cell_post_process_t read_post_process;
+	void			*priv;
+	struct device_node	*np;
+	struct nvmem_device	*nvmem;
+	struct list_head	node;
+};
+
+struct nvmem_cell {
+	struct nvmem_cell_entry *entry;
+	const char		*id;
+	int			index;
+};
+
+static DEFINE_MUTEX(nvmem_mutex);
+static DEFINE_IDA(nvmem_ida);
+
+static DEFINE_MUTEX(nvmem_lookup_mutex);
+static LIST_HEAD(nvmem_lookup_list);
+
+static BLOCKING_NOTIFIER_HEAD(nvmem_notifier);
+
+static int __nvmem_reg_read(struct nvmem_device *nvmem, unsigned int offset,
+			    void *val, size_t bytes)
+{
+	struct nvmem_operations *ops = nvmem->ops;
+
+	if (!ops->reg_read)
+		return -EOPNOTSUPP;
+
+	return ops->reg_read(nvmem->priv, offset, val, bytes);
+}
+
+static int __nvmem_reg_write(struct nvmem_device *nvmem, unsigned int offset,
+			     void *val, size_t bytes)
+{
+	struct nvmem_operations *ops = nvmem->ops;
+	int ret, wr_ok;
+
+	if (!ops->reg_write)
+		return -EOPNOTSUPP;
+
+	ret = gpiod_set_value_cansleep(nvmem->wp_gpio, 0);
+	if (ret)
+		return ret;
+
+	wr_ok = ops->reg_write(nvmem->priv, offset, val, bytes);
+
+	ret = gpiod_set_value_cansleep(nvmem->wp_gpio, 1);
+	if (ret)
+		return ret;
+
+	return wr_ok;
+}
+
+static int nvmem_access_with_keepouts(struct nvmem_device *nvmem,
+				      unsigned int offset, void *val,
+				      size_t bytes, int write)
+{
+
+	unsigned int end = offset + bytes;
+	unsigned int kend, ksize;
+	const struct nvmem_keepout *keepout = nvmem->keepout;
+	const struct nvmem_keepout *keepoutend = keepout + nvmem->nkeepout;
+	int rc;
+
+	/*
+	 * Skip all keepouts before the range being accessed.
+	 * Keepouts are sorted.
+	 */
+	while ((keepout < keepoutend) && (keepout->end <= offset))
+		keepout++;
+
+	while ((offset < end) && (keepout < keepoutend)) {
+		/* Access the valid portion before the keepout. */
+		if (offset < keepout->start) {
+			kend = min(end, keepout->start);
+			ksize = kend - offset;
+			if (write)
+				rc = __nvmem_reg_write(nvmem, offset, val, ksize);
+			else
+				rc = __nvmem_reg_read(nvmem, offset, val, ksize);
+
+			if (rc)
+				return rc;
+
+			offset += ksize;
+			val += ksize;
+		}
+
+		/*
+		 * Now we're aligned to the start of this keepout zone. Go
+		 * through it.
+		 */
+		kend = min(end, keepout->end);
+		ksize = kend - offset;
+		if (!write)
+			memset(val, keepout->value, ksize);
+
+		val += ksize;
+		offset += ksize;
+		keepout++;
+	}
+
+	/*
+	 * If we ran out of keepouts but there's still stuff to do, send it
+	 * down directly
+	 */
+	if (offset < end) {
+		ksize = end - offset;
+		if (write)
+			return __nvmem_reg_write(nvmem, offset, val, ksize);
+		else
+			return __nvmem_reg_read(nvmem, offset, val, ksize);
+	}
+
+	return 0;
+}
+
+static int nvmem_reg_read(struct nvmem_device *nvmem, unsigned int offset,
+			  void *val, size_t bytes)
+{
+	if (!nvmem->nkeepout)
+		return __nvmem_reg_read(nvmem, offset, val, bytes);
+
+	return nvmem_access_with_keepouts(nvmem, offset, val, bytes, false);
+}
+
+static int nvmem_reg_write(struct nvmem_device *nvmem, unsigned int offset,
+			   void *val, size_t bytes)
+{
+	if (!nvmem->nkeepout)
+		return __nvmem_reg_write(nvmem, offset, val, bytes);
+
+	return nvmem_access_with_keepouts(nvmem, offset, val, bytes, true);
+}
+
+#ifdef CONFIG_NVMEM_SYSFS
+static const char * const nvmem_type_str[] = {
+	[NVMEM_TYPE_UNKNOWN] = "Unknown",
+	[NVMEM_TYPE_EEPROM] = "EEPROM",
+	[NVMEM_TYPE_OTP] = "OTP",
+	[NVMEM_TYPE_BATTERY_BACKED] = "Battery backed",
+	[NVMEM_TYPE_FRAM] = "FRAM",
+};
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+static struct lock_class_key eeprom_lock_key;
+#endif
+
+static ssize_t type_show(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	struct nvmem_device *nvmem = to_nvmem_device(dev);
+
+	return sysfs_emit(buf, "%s\n", nvmem_type_str[nvmem->type]);
+}
+
+static DEVICE_ATTR_RO(type);
+
+static ssize_t force_ro_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct nvmem_device *nvmem = to_nvmem_device(dev);
+
+	return sysfs_emit(buf, "%d\n", nvmem->read_only);
+}
+
+static ssize_t force_ro_store(struct device *dev, struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct nvmem_device *nvmem = to_nvmem_device(dev);
+	int ret = kstrtobool(buf, &nvmem->read_only);
+
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(force_ro);
+
+static struct attribute *nvmem_attrs[] = {
+	&dev_attr_force_ro.attr,
+	&dev_attr_type.attr,
+	NULL,
+};
+
+static ssize_t bin_attr_nvmem_read(struct file *filp, struct kobject *kobj,
+				   const struct bin_attribute *attr, char *buf,
+				   loff_t pos, size_t count)
+{
+	struct device *dev;
+	struct nvmem_device *nvmem;
+	int rc;
+
+	if (attr->private)
+		dev = attr->private;
+	else
+		dev = kobj_to_dev(kobj);
+	nvmem = to_nvmem_device(dev);
+
+	if (!IS_ALIGNED(pos, nvmem->stride))
+		return -EINVAL;
+
+	if (count < nvmem->word_size)
+		return -EINVAL;
+
+	count = round_down(count, nvmem->word_size);
+
+	rc = nvmem_reg_read(nvmem, pos, buf, count);
+	if (rc) {
+		if (rc == -EOPNOTSUPP)
+			return -EPERM;
+		return rc;
+	}
+
+	return count;
+}
+
+static ssize_t bin_attr_nvmem_write(struct file *filp, struct kobject *kobj,
+				    const struct bin_attribute *attr, char *buf,
+				    loff_t pos, size_t count)
+{
+	struct device *dev;
+	struct nvmem_device *nvmem;
+	int rc;
+
+	if (attr->private)
+		dev = attr->private;
+	else
+		dev = kobj_to_dev(kobj);
+	nvmem = to_nvmem_device(dev);
+
+	if (!IS_ALIGNED(pos, nvmem->stride))
+		return -EINVAL;
+
+	if (count < nvmem->word_size)
+		return -EINVAL;
+
+	count = round_down(count, nvmem->word_size);
+
+	if (nvmem->read_only)
+		return -EPERM;
+
+	rc = nvmem_reg_write(nvmem, pos, buf, count);
+	if (rc) {
+		if (rc == -EOPNOTSUPP)
+			return -EPERM;
+		return rc;
+	}
+
+	return count;
+}
+
+static umode_t nvmem_bin_attr_get_umode(struct nvmem_device *nvmem)
+{
+	struct nvmem_operations *ops = nvmem->ops;
+
+	umode_t mode = 0400;
+
+	if (!nvmem->root_only)
+		mode |= 0044;
+
+	if (!nvmem->read_only)
+		mode |= 0200;
+
+	if (!ops->reg_write)
+		mode &= ~0200;
+
+	if (!ops->reg_read)
+		mode &= ~0444;
+
+	return mode;
+}
+
+static umode_t nvmem_bin_attr_is_visible(struct kobject *kobj,
+					 const struct bin_attribute *attr,
+					 int i)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct nvmem_device *nvmem = to_nvmem_device(dev);
+
+	return nvmem_bin_attr_get_umode(nvmem);
+}
+
+static size_t nvmem_bin_attr_size(struct kobject *kobj,
+				  const struct bin_attribute *attr,
+				  int i)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct nvmem_device *nvmem = to_nvmem_device(dev);
+
+	return nvmem->size;
+}
+
+static umode_t nvmem_attr_is_visible(struct kobject *kobj,
+				     struct attribute *attr, int i)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct nvmem_device *nvmem = to_nvmem_device(dev);
+	struct nvmem_operations *ops = nvmem->ops;
+
+	/*
+	 * If the device has no .reg_write operation, do not allow
+	 * configuration as read-write.
+	 * If the device is set as read-only by configuration, it
+	 * can be forced into read-write mode using the 'force_ro'
+	 * attribute.
+	 */
+	if (attr == &dev_attr_force_ro.attr && !ops->reg_write)
+		return 0;	/* Attribute not visible */
+
+	return attr->mode;
+}
+
+static struct nvmem_cell *nvmem_create_cell(struct nvmem_cell_entry *entry,
+					    const char *id, int index);
+
+static ssize_t nvmem_cell_attr_read(struct file *filp, struct kobject *kobj,
+				    const struct bin_attribute *attr, char *buf,
+				    loff_t pos, size_t count)
+{
+	struct nvmem_cell_entry *entry;
+	struct nvmem_cell *cell = NULL;
+	size_t cell_sz, read_len;
+	void *content;
+
+	entry = attr->private;
+	cell = nvmem_create_cell(entry, entry->name, 0);
+	if (IS_ERR(cell))
+		return PTR_ERR(cell);
+
+	if (!cell)
+		return -EINVAL;
+
+	content = nvmem_cell_read(cell, &cell_sz);
+	if (IS_ERR(content)) {
+		read_len = PTR_ERR(content);
+		goto destroy_cell;
+	}
+
+	read_len = min_t(unsigned int, cell_sz - pos, count);
+	memcpy(buf, content + pos, read_len);
+	kfree(content);
+
+destroy_cell:
+	kfree_const(cell->id);
+	kfree(cell);
+
+	return read_len;
+}
+
+/* default read/write permissions */
+static const struct bin_attribute bin_attr_rw_nvmem = {
+	.attr	= {
+		.name	= "nvmem",
+		.mode	= 0644,
+	},
+	.read	= bin_attr_nvmem_read,
+	.write	= bin_attr_nvmem_write,
+};
+
+static const struct bin_attribute *const nvmem_bin_attributes[] = {
+	&bin_attr_rw_nvmem,
+	NULL,
+};
+
+static const struct attribute_group nvmem_bin_group = {
+	.bin_attrs	= nvmem_bin_attributes,
+	.attrs		= nvmem_attrs,
+	.is_bin_visible = nvmem_bin_attr_is_visible,
+	.bin_size	= nvmem_bin_attr_size,
+	.is_visible	= nvmem_attr_is_visible,
+};
+
+static const struct attribute_group *nvmem_dev_groups[] = {
+	&nvmem_bin_group,
+	NULL,
+};
+
+static const struct bin_attribute bin_attr_nvmem_eeprom_compat = {
+	.attr	= {
+		.name	= "eeprom",
+	},
+	.read	= bin_attr_nvmem_read,
+	.write	= bin_attr_nvmem_write,
+};
+
+/*
+ * nvmem_setup_compat() - Create an additional binary entry in
+ * drivers sys directory, to be backwards compatible with the older
+ * drivers/misc/eeprom drivers.
+ */
+static int nvmem_sysfs_setup_compat(struct nvmem_device *nvmem,
+				    const struct nvmem_config *config)
+{
+	int rval;
+
+	if (!config->compat)
+		return 0;
+
+	if (!config->base_dev)
+		return -EINVAL;
+
+	nvmem->eeprom = bin_attr_nvmem_eeprom_compat;
+	if (config->type == NVMEM_TYPE_FRAM)
+		nvmem->eeprom.attr.name = "fram";
+	nvmem->eeprom.attr.mode = nvmem_bin_attr_get_umode(nvmem);
+	nvmem->eeprom.size = nvmem->size;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	nvmem->eeprom.attr.key = &eeprom_lock_key;
+#endif
+	nvmem->eeprom.private = &nvmem->dev;
+	nvmem->base_dev = config->base_dev;
+
+	rval = device_create_bin_file(nvmem->base_dev, &nvmem->eeprom);
+	if (rval) {
+		dev_err(&nvmem->dev,
+			"Failed to create eeprom binary file %d\n", rval);
+		return rval;
+	}
+
+	nvmem->flags |= FLAG_COMPAT;
+
+	return 0;
+}
+
+static void nvmem_sysfs_remove_compat(struct nvmem_device *nvmem)
+{
+	if (nvmem->flags & FLAG_COMPAT)
+		device_remove_bin_file(nvmem->base_dev, &nvmem->eeprom);
+}
+
+static int nvmem_populate_sysfs_cells(struct nvmem_device *nvmem)
+{
+	struct attribute_group group = {
+		.name	= "cells",
+	};
+	struct nvmem_cell_entry *entry;
+	const struct bin_attribute **pattrs;
+	struct bin_attribute *attrs;
+	unsigned int ncells = 0, i = 0;
+	int ret;
+
+	guard(mutex)(&nvmem_mutex);
+
+	if (list_empty(&nvmem->cells) || nvmem->sysfs_cells_populated)
+		return 0;
+
+	/* Allocate an array of attributes with a sentinel */
+	ncells = list_count_nodes(&nvmem->cells);
+	pattrs = devm_kcalloc(&nvmem->dev, ncells + 1,
+			      sizeof(struct bin_attribute *), GFP_KERNEL);
+	if (!pattrs)
+		return -ENOMEM;
+
+	attrs = devm_kcalloc(&nvmem->dev, ncells, sizeof(struct bin_attribute), GFP_KERNEL);
+	if (!attrs)
+		return -ENOMEM;
+
+	/* Initialize each attribute to take the name and size of the cell */
+	list_for_each_entry(entry, &nvmem->cells, node) {
+		sysfs_bin_attr_init(&attrs[i]);
+		attrs[i].attr.name = devm_kasprintf(&nvmem->dev, GFP_KERNEL,
+						    "%s@%x,%x", entry->name,
+						    entry->offset,
+						    entry->bit_offset);
+		attrs[i].attr.mode = 0444 & nvmem_bin_attr_get_umode(nvmem);
+		attrs[i].size = entry->bytes;
+		attrs[i].read = &nvmem_cell_attr_read;
+		attrs[i].private = entry;
+		if (!attrs[i].attr.name)
+			return -ENOMEM;
+
+		pattrs[i] = &attrs[i];
+		i++;
+	}
+
+	group.bin_attrs = pattrs;
+
+	ret = device_add_group(&nvmem->dev, &group);
+	if (ret)
+		return ret;
+
+	nvmem->sysfs_cells_populated = true;
+
+	return ret;
+}
+
+#else /* CONFIG_NVMEM_SYSFS */
+
+static int nvmem_sysfs_setup_compat(struct nvmem_device *nvmem,
+				    const struct nvmem_config *config)
+{
+	return -ENOSYS;
+}
+static void nvmem_sysfs_remove_compat(struct nvmem_device *nvmem)
+{
+}
+
+#endif /* CONFIG_NVMEM_SYSFS */
+
+static void nvmem_release(struct device *dev)
+{
+	struct nvmem_device *nvmem = to_nvmem_device(dev);
+
+	ida_free(&nvmem_ida, nvmem->id);
+	gpiod_put(nvmem->wp_gpio);
+	kfree(nvmem->ops);
+	kfree(nvmem);
+}
+
+static const struct device_type nvmem_provider_type = {
+	.release	= nvmem_release,
+};
+
+static const struct bus_type nvmem_bus_type = {
+	.name		= "nvmem",
+};
+
+static void nvmem_cell_entry_drop(struct nvmem_cell_entry *cell)
+{
+	blocking_notifier_call_chain(&nvmem_notifier, NVMEM_CELL_REMOVE, cell);
+	scoped_guard(mutex, &nvmem_mutex)
+		list_del(&cell->node);
+	of_node_put(cell->np);
+	kfree_const(cell->name);
+	kfree(cell);
+}
+
+static void nvmem_device_remove_all_cells(const struct nvmem_device *nvmem)
+{
+	struct nvmem_cell_entry *cell, *p;
+
+	list_for_each_entry_safe(cell, p, &nvmem->cells, node)
+		nvmem_cell_entry_drop(cell);
+}
+
+static void nvmem_cell_entry_add(struct nvmem_cell_entry *cell)
+{
+	scoped_guard(mutex, &nvmem_mutex)
+		list_add_tail(&cell->node, &cell->nvmem->cells);
+	blocking_notifier_call_chain(&nvmem_notifier, NVMEM_CELL_ADD, cell);
+}
+
+static int nvmem_cell_info_to_nvmem_cell_entry_nodup(struct nvmem_device *nvmem,
+						     const struct nvmem_cell_info *info,
+						     struct nvmem_cell_entry *cell)
+{
+	cell->nvmem = nvmem;
+	cell->offset = info->offset;
+	cell->raw_len = info->raw_len ?: info->bytes;
+	cell->bytes = info->bytes;
+	cell->name = info->name;
+	cell->read_post_process = info->read_post_process;
+	cell->priv = info->priv;
+
+	cell->bit_offset = info->bit_offset;
+	cell->nbits = info->nbits;
+	cell->np = info->np;
+
+	if (cell->nbits) {
+		cell->bytes = DIV_ROUND_UP(cell->nbits + cell->bit_offset,
+					   BITS_PER_BYTE);
+		cell->raw_len = ALIGN(cell->bytes, nvmem->word_size);
+	}
+
+	if (!IS_ALIGNED(cell->offset, nvmem->stride)) {
+		dev_err(&nvmem->dev,
+			"cell %s unaligned to nvmem stride %d\n",
+			cell->name ?: "<unknown>", nvmem->stride);
+		return -EINVAL;
+	}
+
+	if (!IS_ALIGNED(cell->raw_len, nvmem->word_size)) {
+		dev_err(&nvmem->dev,
+			"cell %s raw len %zd unaligned to nvmem word size %d\n",
+			cell->name ?: "<unknown>", cell->raw_len,
+			nvmem->word_size);
+
+		if (info->raw_len)
+			return -EINVAL;
+
+		cell->raw_len = ALIGN(cell->raw_len, nvmem->word_size);
+	}
+
+	return 0;
+}
+
+static int nvmem_cell_info_to_nvmem_cell_entry(struct nvmem_device *nvmem,
+					       const struct nvmem_cell_info *info,
+					       struct nvmem_cell_entry *cell)
+{
+	int err;
+
+	err = nvmem_cell_info_to_nvmem_cell_entry_nodup(nvmem, info, cell);
+	if (err)
+		return err;
+
+	cell->name = kstrdup_const(info->name, GFP_KERNEL);
+	if (!cell->name)
+		return -ENOMEM;
+
+	return 0;
+}
+
+/**
+ * nvmem_add_one_cell() - Add one cell information to an nvmem device
+ *
+ * @nvmem: nvmem device to add cells to.
+ * @info: nvmem cell info to add to the device
+ *
+ * Return: 0 or negative error code on failure.
+ */
+int nvmem_add_one_cell(struct nvmem_device *nvmem,
+		       const struct nvmem_cell_info *info)
+{
+	struct nvmem_cell_entry *cell;
+	int rval;
+
+	cell = kzalloc_obj(*cell);
+	if (!cell)
+		return -ENOMEM;
+
+	rval = nvmem_cell_info_to_nvmem_cell_entry(nvmem, info, cell);
+	if (rval) {
+		kfree(cell);
+		return rval;
+	}
+
+	nvmem_cell_entry_add(cell);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(nvmem_add_one_cell);
+
+/**
+ * nvmem_add_cells() - Add cell information to an nvmem device
+ *
+ * @nvmem: nvmem device to add cells to.
+ * @info: nvmem cell info to add to the device
+ * @ncells: number of cells in info
+ *
+ * Return: 0 or negative error code on failure.
+ */
+static int nvmem_add_cells(struct nvmem_device *nvmem,
+		    const struct nvmem_cell_info *info,
+		    int ncells)
+{
+	int i, rval;
+
+	for (i = 0; i < ncells; i++) {
+		rval = nvmem_add_one_cell(nvmem, &info[i]);
+		if (rval)
+			return rval;
+	}
+
+	return 0;
+}
+
+/**
+ * nvmem_register_notifier() - Register a notifier block for nvmem events.
+ *
+ * @nb: notifier block to be called on nvmem events.
+ *
+ * Return: 0 on success, negative error number on failure.
+ */
+int nvmem_register_notifier(struct notifier_block *nb)
+{
+	return blocking_notifier_chain_register(&nvmem_notifier, nb);
+}
+EXPORT_SYMBOL_GPL(nvmem_register_notifier);
+
+/**
+ * nvmem_unregister_notifier() - Unregister a notifier block for nvmem events.
+ *
+ * @nb: notifier block to be unregistered.
+ *
+ * Return: 0 on success, negative error number on failure.
+ */
+int nvmem_unregister_notifier(struct notifier_block *nb)
+{
+	return blocking_notifier_chain_unregister(&nvmem_notifier, nb);
+}
+EXPORT_SYMBOL_GPL(nvmem_unregister_notifier);
+
+static struct nvmem_cell_entry *
+nvmem_find_cell_entry_by_name(struct nvmem_device *nvmem, const char *cell_id)
+{
+	struct nvmem_cell_entry *iter, *cell = NULL;
+
+	guard(mutex)(&nvmem_mutex);
+
+	list_for_each_entry(iter, &nvmem->cells, node) {
+		if (strcmp(cell_id, iter->name) == 0) {
+			cell = iter;
+			break;
+		}
+	}
+
+	return cell;
+}
+
+static int nvmem_validate_keepouts(struct nvmem_device *nvmem)
+{
+	unsigned int cur = 0;
+	const struct nvmem_keepout *keepout = nvmem->keepout;
+	const struct nvmem_keepout *keepoutend = keepout + nvmem->nkeepout;
+
+	while (keepout < keepoutend) {
+		/* Ensure keepouts are sorted and don't overlap. */
+		if (keepout->start < cur) {
+			dev_err(&nvmem->dev,
+				"Keepout regions aren't sorted or overlap.\n");
+
+			return -ERANGE;
+		}
+
+		if (keepout->end < keepout->start) {
+			dev_err(&nvmem->dev,
+				"Invalid keepout region.\n");
+
+			return -EINVAL;
+		}
+
+		/*
+		 * Validate keepouts (and holes between) don't violate
+		 * word_size constraints.
+		 */
+		if ((keepout->end - keepout->start < nvmem->word_size) ||
+		    ((keepout->start != cur) &&
+		     (keepout->start - cur < nvmem->word_size))) {
+
+			dev_err(&nvmem->dev,
+				"Keepout regions violate word_size constraints.\n");
+
+			return -ERANGE;
+		}
+
+		/* Validate keepouts don't violate stride (alignment). */
+		if (!IS_ALIGNED(keepout->start, nvmem->stride) ||
+		    !IS_ALIGNED(keepout->end, nvmem->stride)) {
+
+			dev_err(&nvmem->dev,
+				"Keepout regions violate stride.\n");
+
+			return -EINVAL;
+		}
+
+		cur = keepout->end;
+		keepout++;
+	}
+
+	return 0;
+}
+
+int nvmem_add_cells_from_dt(struct nvmem_device *nvmem, struct device_node *np)
+{
+	struct device *dev = &nvmem->dev;
+	const __be32 *addr;
+	int len, ret;
+
+	for_each_child_of_node_scoped(np, child) {
+		struct nvmem_cell_info info = {0};
+
+		addr = of_get_property(child, "reg", &len);
+		if (!addr)
+			continue;
+		if (len < 2 * sizeof(u32)) {
+			dev_err(dev, "nvmem: invalid reg on %pOF\n", child);
+			return -EINVAL;
+		}
+
+		info.offset = be32_to_cpup(addr++);
+		info.bytes = be32_to_cpup(addr);
+		info.name = kasprintf(GFP_KERNEL, "%pOFn", child);
+
+		addr = of_get_property(child, "bits", &len);
+		if (addr && len == (2 * sizeof(u32))) {
+			info.bit_offset = be32_to_cpup(addr++);
+			info.nbits = be32_to_cpup(addr);
+			if (info.bit_offset >= BITS_PER_BYTE * info.bytes ||
+			    info.nbits < 1 ||
+			    info.bit_offset + info.nbits > BITS_PER_BYTE * info.bytes) {
+				dev_err(dev, "nvmem: invalid bits on %pOF\n", child);
+				return -EINVAL;
+			}
+		}
+
+		info.np = of_node_get(child);
+
+		if (nvmem->fixup_dt_cell_info)
+			nvmem->fixup_dt_cell_info(nvmem, &info);
+
+		ret = nvmem_add_one_cell(nvmem, &info);
+		kfree(info.name);
+		if (ret) {
+			of_node_put(info.np);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(nvmem_add_cells_from_dt);
+
+static int nvmem_add_cells_from_legacy_of(struct nvmem_device *nvmem)
+{
+	return nvmem_add_cells_from_dt(nvmem, nvmem->dev.of_node);
+}
+
+int nvmem_layout_register(struct nvmem_layout *layout)
+{
+	int ret;
+
+	if (!layout->add_cells)
+		return -EINVAL;
+
+	/* Populate the cells */
+	ret = layout->add_cells(layout);
+	if (ret)
+		return ret;
+
+#ifdef CONFIG_NVMEM_SYSFS
+	ret = nvmem_populate_sysfs_cells(layout->nvmem);
+	if (ret) {
+		nvmem_device_remove_all_cells(layout->nvmem);
+		return ret;
+	}
+#endif
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(nvmem_layout_register);
+
+void nvmem_layout_unregister(struct nvmem_layout *layout)
+{
+	/* Keep the API even with an empty stub in case we need it later */
+}
+EXPORT_SYMBOL_GPL(nvmem_layout_unregister);
+
+/**
+ * nvmem_register() - Register a nvmem device for given nvmem_config.
+ * Also creates a binary entry in /sys/bus/nvmem/devices/dev-name/nvmem
+ *
+ * @config: nvmem device configuration with which nvmem device is created.
+ *
+ * Return: Will be an ERR_PTR() on error or a valid pointer to nvmem_device
+ * on success.
+ */
+
+struct nvmem_device *nvmem_register(const struct nvmem_config *config)
+{
+	struct nvmem_operations *ops;
+	struct nvmem_device *nvmem;
+	int rval;
+
+	if (!config->dev)
+		return ERR_PTR(-EINVAL);
+
+	if (!config->reg_read && !config->reg_write)
+		return ERR_PTR(-EINVAL);
+
+	nvmem = kzalloc_obj(*nvmem);
+	if (!nvmem)
+		return ERR_PTR(-ENOMEM);
+
+	ops = kzalloc_obj(*ops);
+	if (!ops) {
+		kfree(nvmem);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	rval = ida_alloc(&nvmem_ida, GFP_KERNEL);
+	if (rval < 0) {
+		kfree(ops);
+		kfree(nvmem);
+		return ERR_PTR(rval);
+	}
+
+	nvmem->id = rval;
+
+	nvmem->dev.type = &nvmem_provider_type;
+	nvmem->dev.bus = &nvmem_bus_type;
+	nvmem->dev.parent = config->dev;
+	nvmem->ops = ops;
+
+	device_initialize(&nvmem->dev);
+
+	if (!config->ignore_wp)
+		nvmem->wp_gpio = gpiod_get_optional(config->dev, "wp",
+						    GPIOD_OUT_HIGH);
+	if (IS_ERR(nvmem->wp_gpio)) {
+		rval = PTR_ERR(nvmem->wp_gpio);
+		nvmem->wp_gpio = NULL;
+		goto err_put_device;
+	}
+
+	kref_init(&nvmem->refcnt);
+	INIT_LIST_HEAD(&nvmem->cells);
+	nvmem->fixup_dt_cell_info = config->fixup_dt_cell_info;
+
+	ops->reg_read = config->reg_read;
+	ops->reg_write = config->reg_write;
+
+	nvmem->owner = config->owner;
+	if (!nvmem->owner && config->dev->driver)
+		nvmem->owner = config->dev->driver->owner;
+	nvmem->stride = config->stride ?: 1;
+	nvmem->word_size = config->word_size ?: 1;
+	nvmem->size = config->size;
+	nvmem->root_only = config->root_only;
+	nvmem->priv = config->priv;
+	nvmem->type = config->type;
+	nvmem->keepout = config->keepout;
+	nvmem->nkeepout = config->nkeepout;
+	if (config->of_node)
+		nvmem->dev.of_node = config->of_node;
+	else
+		nvmem->dev.of_node = config->dev->of_node;
+
+	switch (config->id) {
+	case NVMEM_DEVID_NONE:
+		rval = dev_set_name(&nvmem->dev, "%s", config->name);
+		break;
+	case NVMEM_DEVID_AUTO:
+		rval = dev_set_name(&nvmem->dev, "%s%d", config->name, nvmem->id);
+		break;
+	default:
+		rval = dev_set_name(&nvmem->dev, "%s%d",
+			     config->name ? : "nvmem",
+			     config->name ? config->id : nvmem->id);
+		break;
+	}
+
+	if (rval)
+		goto err_put_device;
+
+	nvmem->read_only = device_property_present(config->dev, "read-only") ||
+			   config->read_only || !ops->reg_write;
+
+#ifdef CONFIG_NVMEM_SYSFS
+	nvmem->dev.groups = nvmem_dev_groups;
+#endif
+
+	if (nvmem->nkeepout) {
+		rval = nvmem_validate_keepouts(nvmem);
+		if (rval)
+			goto err_put_device;
+	}
+
+	if (config->compat) {
+		rval = nvmem_sysfs_setup_compat(nvmem, config);
+		if (rval)
+			goto err_put_device;
+	}
+
+	if (config->cells) {
+		rval = nvmem_add_cells(nvmem, config->cells, config->ncells);
+		if (rval)
+			goto err_remove_cells;
+	}
+
+	if (config->add_legacy_fixed_of_cells) {
+		rval = nvmem_add_cells_from_legacy_of(nvmem);
+		if (rval)
+			goto err_remove_cells;
+	}
+
+	dev_dbg(&nvmem->dev, "Registering nvmem device %s\n", config->name);
+
+	rval = device_add(&nvmem->dev);
+	if (rval)
+		goto err_remove_cells;
+
+	rval = nvmem_populate_layout(nvmem);
+	if (rval)
+		goto err_remove_dev;
+
+	/* If the device has WP GPIO, default to read-only */
+	if (nvmem->wp_gpio)
+		nvmem->read_only = true;
+
+#ifdef CONFIG_NVMEM_SYSFS
+	rval = nvmem_populate_sysfs_cells(nvmem);
+	if (rval)
+		goto err_destroy_layout;
+#endif
+
+	blocking_notifier_call_chain(&nvmem_notifier, NVMEM_ADD, nvmem);
+
+	return nvmem;
+
+#ifdef CONFIG_NVMEM_SYSFS
+err_destroy_layout:
+	nvmem_destroy_layout(nvmem);
+#endif
+err_remove_dev:
+	device_del(&nvmem->dev);
+err_remove_cells:
+	nvmem_device_remove_all_cells(nvmem);
+	nvmem_sysfs_remove_compat(nvmem);
+err_put_device:
+	put_device(&nvmem->dev);
+
+	return ERR_PTR(rval);
+}
+EXPORT_SYMBOL_GPL(nvmem_register);
+
+static void nvmem_device_release(struct kref *kref)
+{
+	struct nvmem_device *nvmem;
+
+	nvmem = container_of(kref, struct nvmem_device, refcnt);
+
+	blocking_notifier_call_chain(&nvmem_notifier, NVMEM_REMOVE, nvmem);
+
+	nvmem_sysfs_remove_compat(nvmem);
+
+	nvmem_device_remove_all_cells(nvmem);
+	nvmem_destroy_layout(nvmem);
+	device_unregister(&nvmem->dev);
+}
+
+/**
+ * nvmem_unregister() - Unregister previously registered nvmem device
+ *
+ * @nvmem: Pointer to previously registered nvmem device.
+ */
+void nvmem_unregister(struct nvmem_device *nvmem)
+{
+	if (nvmem)
+		kref_put(&nvmem->refcnt, nvmem_device_release);
+}
+EXPORT_SYMBOL_GPL(nvmem_unregister);
+
+static void devm_nvmem_unregister(void *nvmem)
+{
+	nvmem_unregister(nvmem);
+}
+
+/**
+ * devm_nvmem_register() - Register a managed nvmem device for given
+ * nvmem_config.
+ * Also creates a binary entry in /sys/bus/nvmem/devices/dev-name/nvmem
+ *
+ * @dev: Device that uses the nvmem device.
+ * @config: nvmem device configuration with which nvmem device is created.
+ *
+ * Return: Will be an ERR_PTR() on error or a valid pointer to nvmem_device
+ * on success.
+ */
+struct nvmem_device *devm_nvmem_register(struct device *dev,
+					 const struct nvmem_config *config)
+{
+	struct nvmem_device *nvmem;
+	int ret;
+
+	nvmem = nvmem_register(config);
+	if (IS_ERR(nvmem))
+		return nvmem;
+
+	ret = devm_add_action_or_reset(dev, devm_nvmem_unregister, nvmem);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return nvmem;
+}
+EXPORT_SYMBOL_GPL(devm_nvmem_register);
+
+static struct nvmem_device *nvmem_device_match(void *data,
+			int (*match)(struct device *dev, const void *data))
+{
+	struct nvmem_device *nvmem = NULL;
+	struct device *dev;
+
+	scoped_guard(mutex, &nvmem_mutex) {
+		dev = bus_find_device(&nvmem_bus_type, NULL, data, match);
+		if (dev)
+			nvmem = to_nvmem_device(dev);
+	}
+	if (!nvmem)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	if (!try_module_get(nvmem->owner)) {
+		dev_err(&nvmem->dev,
+			"could not increase module refcount for cell %s\n",
+			nvmem_dev_name(nvmem));
+
+		put_device(&nvmem->dev);
+		return ERR_PTR(-EINVAL);
+	}
+
+	kref_get(&nvmem->refcnt);
+
+	return nvmem;
+}
+
+#if IS_ENABLED(CONFIG_OF)
+/**
+ * of_nvmem_device_get() - Get nvmem device from a given id
+ *
+ * @np: Device tree node that uses the nvmem device.
+ * @id: nvmem name from nvmem-names property.
+ *
+ * Return: ERR_PTR() on error or a valid pointer to a struct nvmem_device
+ * on success.
+ */
+struct nvmem_device *of_nvmem_device_get(struct device_node *np, const char *id)
+{
+
+	struct device_node *nvmem_np;
+	struct nvmem_device *nvmem;
+	int index = 0;
+
+	if (id)
+		index = of_property_match_string(np, "nvmem-names", id);
+
+	nvmem_np = of_parse_phandle(np, "nvmem", index);
+	if (!nvmem_np)
+		return ERR_PTR(-ENOENT);
+
+	nvmem = nvmem_device_match(nvmem_np, device_match_of_node);
+	of_node_put(nvmem_np);
+	return nvmem;
+}
+EXPORT_SYMBOL_GPL(of_nvmem_device_get);
+#endif
+
+/**
+ * nvmem_device_get() - Get nvmem device from a given id
+ *
+ * @dev: Device that uses the nvmem device.
+ * @dev_name: name of the requested nvmem device.
+ *
+ * Return: ERR_PTR() on error or a valid pointer to a struct nvmem_device
+ * on success.
+ */
+struct nvmem_device *nvmem_device_get(struct device *dev, const char *dev_name)
+{
+	if (dev->of_node) { /* try dt first */
+		struct nvmem_device *nvmem;
+
+		nvmem = of_nvmem_device_get(dev->of_node, dev_name);
+
+		if (!IS_ERR(nvmem) || PTR_ERR(nvmem) == -EPROBE_DEFER)
+			return nvmem;
+
+	}
+
+	return nvmem_device_match((void *)dev_name, device_match_name);
+}
+EXPORT_SYMBOL_GPL(nvmem_device_get);
+
+/**
+ * nvmem_device_find() - Find nvmem device with matching function
+ *
+ * @data: Data to pass to match function
+ * @match: Callback function to check device
+ *
+ * Return: ERR_PTR() on error or a valid pointer to a struct nvmem_device
+ * on success.
+ */
+struct nvmem_device *nvmem_device_find(void *data,
+			int (*match)(struct device *dev, const void *data))
+{
+	return nvmem_device_match(data, match);
+}
+EXPORT_SYMBOL_GPL(nvmem_device_find);
+
+static int devm_nvmem_device_match(struct device *dev, void *res, void *data)
+{
+	struct nvmem_device **nvmem = res;
+
+	if (WARN_ON(!nvmem || !*nvmem))
+		return 0;
+
+	return *nvmem == data;
+}
+
+static void devm_nvmem_device_release(struct device *dev, void *res)
+{
+	nvmem_device_put(*(struct nvmem_device **)res);
+}
+
+/**
+ * devm_nvmem_device_put() - put already got nvmem device
+ *
+ * @dev: Device that uses the nvmem device.
+ * @nvmem: pointer to nvmem device allocated by devm_nvmem_cell_get(),
+ * that needs to be released.
+ */
+void devm_nvmem_device_put(struct device *dev, struct nvmem_device *nvmem)
+{
+	int ret;
+
+	ret = devres_release(dev, devm_nvmem_device_release,
+			     devm_nvmem_device_match, nvmem);
+
+	WARN_ON(ret);
+}
+EXPORT_SYMBOL_GPL(devm_nvmem_device_put);
+
+/**
+ * nvmem_device_put() - put already got nvmem device
+ *
+ * @nvmem: pointer to nvmem device that needs to be released.
+ */
+void nvmem_device_put(struct nvmem_device *nvmem)
+{
+	put_device(&nvmem->dev);
+	module_put(nvmem->owner);
+	kref_put(&nvmem->refcnt, nvmem_device_release);
+}
+EXPORT_SYMBOL_GPL(nvmem_device_put);
+
+/**
+ * devm_nvmem_device_get() - Get nvmem device of device from a given id
+ *
+ * @dev: Device that requests the nvmem device.
+ * @id: name id for the requested nvmem device.
+ *
+ * Return: ERR_PTR() on error or a valid pointer to a struct nvmem_device
+ * on success.  The nvmem_device will be freed by the automatically once the
+ * device is freed.
+ */
+struct nvmem_device *devm_nvmem_device_get(struct device *dev, const char *id)
+{
+	struct nvmem_device **ptr, *nvmem;
+
+	ptr = devres_alloc(devm_nvmem_device_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	nvmem = nvmem_device_get(dev, id);
+	if (!IS_ERR(nvmem)) {
+		*ptr = nvmem;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return nvmem;
+}
+EXPORT_SYMBOL_GPL(devm_nvmem_device_get);
+
+static struct nvmem_cell *nvmem_create_cell(struct nvmem_cell_entry *entry,
+					    const char *id, int index)
+{
+	struct nvmem_cell *cell;
+	const char *name = NULL;
+
+	cell = kzalloc_obj(*cell);
+	if (!cell)
+		return ERR_PTR(-ENOMEM);
+
+	if (id) {
+		name = kstrdup_const(id, GFP_KERNEL);
+		if (!name) {
+			kfree(cell);
+			return ERR_PTR(-ENOMEM);
+		}
+	}
+
+	cell->id = name;
+	cell->entry = entry;
+	cell->index = index;
+
+	return cell;
+}
+
+static struct nvmem_cell *
+nvmem_cell_get_from_lookup(struct device *dev, const char *con_id)
+{
+	struct nvmem_cell_entry *cell_entry;
+	struct nvmem_cell *cell = ERR_PTR(-ENOENT);
+	struct nvmem_cell_lookup *lookup;
+	struct nvmem_device *nvmem;
+	const char *dev_id;
+
+	if (!dev)
+		return ERR_PTR(-EINVAL);
+
+	dev_id = dev_name(dev);
+
+	guard(mutex)(&nvmem_lookup_mutex);
+
+	list_for_each_entry(lookup, &nvmem_lookup_list, node) {
+		if ((strcmp(lookup->dev_id, dev_id) == 0) &&
+		    (strcmp(lookup->con_id, con_id) == 0)) {
+			/* This is the right entry. */
+			nvmem = nvmem_device_match((void *)lookup->nvmem_name,
+						   device_match_name);
+			if (IS_ERR(nvmem))
+				/* Provider may not be registered yet. */
+				return ERR_CAST(nvmem);
+
+			cell_entry = nvmem_find_cell_entry_by_name(nvmem,
+								   lookup->cell_name);
+			if (!cell_entry) {
+				nvmem_device_put(nvmem);
+				cell = ERR_PTR(-ENOENT);
+			} else {
+				cell = nvmem_create_cell(cell_entry, con_id, 0);
+				if (IS_ERR(cell))
+					nvmem_device_put(nvmem);
+			}
+			break;
+		}
+	}
+
+	return cell;
+}
+
+static void nvmem_layout_module_put(struct nvmem_device *nvmem)
+{
+	if (nvmem->layout && nvmem->layout->dev.driver)
+		module_put(nvmem->layout->dev.driver->owner);
+}
+
+#if IS_ENABLED(CONFIG_OF)
+static struct nvmem_cell_entry *
+nvmem_find_cell_entry_by_node(struct nvmem_device *nvmem, struct device_node *np)
+{
+	struct nvmem_cell_entry *cell;
+
+	guard(mutex)(&nvmem_mutex);
+
+	list_for_each_entry(cell, &nvmem->cells, node) {
+		if (np == cell->np)
+			return cell;
+	}
+
+	return NULL;
+}
+
+static int nvmem_layout_module_get_optional(struct nvmem_device *nvmem)
+{
+	if (!nvmem->layout)
+		return 0;
+
+	if (!nvmem->layout->dev.driver ||
+	    !try_module_get(nvmem->layout->dev.driver->owner))
+		return -EPROBE_DEFER;
+
+	return 0;
+}
+
+/**
+ * of_nvmem_cell_get() - Get a nvmem cell from given device node and cell id
+ *
+ * @np: Device tree node that uses the nvmem cell.
+ * @id: nvmem cell name from nvmem-cell-names property, or NULL
+ *      for the cell at index 0 (the lone cell with no accompanying
+ *      nvmem-cell-names property).
+ *
+ * Return: Will be an ERR_PTR() on error or a valid pointer
+ * to a struct nvmem_cell.  The nvmem_cell will be freed by the
+ * nvmem_cell_put().
+ */
+struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, const char *id)
+{
+	struct device_node *cell_np, *nvmem_np;
+	struct nvmem_device *nvmem;
+	struct nvmem_cell_entry *cell_entry;
+	struct nvmem_cell *cell;
+	struct of_phandle_args cell_spec;
+	int index = 0;
+	int cell_index = 0;
+	int ret;
+
+	/* if cell name exists, find index to the name */
+	if (id)
+		index = of_property_match_string(np, "nvmem-cell-names", id);
+
+	ret = of_parse_phandle_with_optional_args(np, "nvmem-cells",
+						  "#nvmem-cell-cells",
+						  index, &cell_spec);
+	if (ret)
+		return ERR_PTR(-ENOENT);
+
+	if (cell_spec.args_count > 1)
+		return ERR_PTR(-EINVAL);
+
+	cell_np = cell_spec.np;
+	if (cell_spec.args_count)
+		cell_index = cell_spec.args[0];
+
+	nvmem_np = of_get_parent(cell_np);
+	if (!nvmem_np) {
+		of_node_put(cell_np);
+		return ERR_PTR(-EINVAL);
+	}
+
+	/* nvmem layouts produce cells within the nvmem-layout container */
+	if (of_node_name_eq(nvmem_np, "nvmem-layout")) {
+		nvmem_np = of_get_next_parent(nvmem_np);
+		if (!nvmem_np) {
+			of_node_put(cell_np);
+			return ERR_PTR(-EINVAL);
+		}
+	}
+
+	nvmem = nvmem_device_match(nvmem_np, device_match_of_node);
+	of_node_put(nvmem_np);
+	if (IS_ERR(nvmem)) {
+		of_node_put(cell_np);
+		return ERR_CAST(nvmem);
+	}
+
+	ret = nvmem_layout_module_get_optional(nvmem);
+	if (ret) {
+		of_node_put(cell_np);
+		nvmem_device_put(nvmem);
+		return ERR_PTR(ret);
+	}
+
+	cell_entry = nvmem_find_cell_entry_by_node(nvmem, cell_np);
+	of_node_put(cell_np);
+	if (!cell_entry) {
+		nvmem_layout_module_put(nvmem);
+		ret = nvmem->layout ? -EPROBE_DEFER : -ENOENT;
+		nvmem_device_put(nvmem);
+		return ERR_PTR(ret);
+	}
+
+	cell = nvmem_create_cell(cell_entry, id, cell_index);
+	if (IS_ERR(cell)) {
+		nvmem_layout_module_put(nvmem);
+		nvmem_device_put(nvmem);
+	}
+
+	return cell;
+}
+EXPORT_SYMBOL_GPL(of_nvmem_cell_get);
+#endif
+
+/**
+ * nvmem_cell_get() - Get nvmem cell of device from a given cell name
+ *
+ * @dev: Device that requests the nvmem cell.
+ * @id: nvmem cell name to get (this corresponds with the name from the
+ *      nvmem-cell-names property for DT systems and with the con_id from
+ *      the lookup entry for non-DT systems).
+ *
+ * Return: Will be an ERR_PTR() on error or a valid pointer
+ * to a struct nvmem_cell.  The nvmem_cell will be freed by the
+ * nvmem_cell_put().
+ */
+struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *id)
+{
+	struct nvmem_cell *cell;
+
+	if (dev->of_node) { /* try dt first */
+		cell = of_nvmem_cell_get(dev->of_node, id);
+		if (!IS_ERR(cell) || PTR_ERR(cell) == -EPROBE_DEFER)
+			return cell;
+	}
+
+	/* NULL cell id only allowed for device tree; invalid otherwise */
+	if (!id)
+		return ERR_PTR(-EINVAL);
+
+	return nvmem_cell_get_from_lookup(dev, id);
+}
+EXPORT_SYMBOL_GPL(nvmem_cell_get);
+
+static void devm_nvmem_cell_release(struct device *dev, void *res)
+{
+	nvmem_cell_put(*(struct nvmem_cell **)res);
+}
+
+/**
+ * devm_nvmem_cell_get() - Get nvmem cell of device from a given id
+ *
+ * @dev: Device that requests the nvmem cell.
+ * @id: nvmem cell name id to get.
+ *
+ * Return: Will be an ERR_PTR() on error or a valid pointer
+ * to a struct nvmem_cell.  The nvmem_cell will be freed by the
+ * automatically once the device is freed.
+ */
+struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, const char *id)
+{
+	struct nvmem_cell **ptr, *cell;
+
+	ptr = devres_alloc(devm_nvmem_cell_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	cell = nvmem_cell_get(dev, id);
+	if (!IS_ERR(cell)) {
+		*ptr = cell;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return cell;
+}
+EXPORT_SYMBOL_GPL(devm_nvmem_cell_get);
+
+static int devm_nvmem_cell_match(struct device *dev, void *res, void *data)
+{
+	struct nvmem_cell **c = res;
+
+	if (WARN_ON(!c || !*c))
+		return 0;
+
+	return *c == data;
+}
+
+/**
+ * devm_nvmem_cell_put() - Release previously allocated nvmem cell
+ * from devm_nvmem_cell_get.
+ *
+ * @dev: Device that requests the nvmem cell.
+ * @cell: Previously allocated nvmem cell by devm_nvmem_cell_get().
+ */
+void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell)
+{
+	int ret;
+
+	ret = devres_release(dev, devm_nvmem_cell_release,
+				devm_nvmem_cell_match, cell);
+
+	WARN_ON(ret);
+}
+EXPORT_SYMBOL(devm_nvmem_cell_put);
+
+/**
+ * nvmem_cell_put() - Release previously allocated nvmem cell.
+ *
+ * @cell: Previously allocated nvmem cell by nvmem_cell_get().
+ */
+void nvmem_cell_put(struct nvmem_cell *cell)
+{
+	struct nvmem_device *nvmem = cell->entry->nvmem;
+
+	if (cell->id)
+		kfree_const(cell->id);
+
+	kfree(cell);
+	nvmem_layout_module_put(nvmem);
+	nvmem_device_put(nvmem);
+}
+EXPORT_SYMBOL_GPL(nvmem_cell_put);
+
+static void nvmem_shift_read_buffer_in_place(struct nvmem_cell_entry *cell, void *buf)
+{
+	u8 *p, *b;
+	int i, extra, bytes_offset;
+	int bit_offset = cell->bit_offset;
+
+	p = b = buf;
+
+	bytes_offset = bit_offset / BITS_PER_BYTE;
+	b += bytes_offset;
+	bit_offset %= BITS_PER_BYTE;
+
+	if (bit_offset % BITS_PER_BYTE) {
+		/* First shift */
+		*p = *b++ >> bit_offset;
+
+		/* setup rest of the bytes if any */
+		for (i = 1; i < cell->bytes; i++) {
+			/* Get bits from next byte and shift them towards msb */
+			*p++ |= *b << (BITS_PER_BYTE - bit_offset);
+
+			*p = *b++ >> bit_offset;
+		}
+	} else if (p != b) {
+		memmove(p, b, cell->bytes - bytes_offset);
+		p += cell->bytes - 1;
+	} else {
+		/* point to the msb */
+		p += cell->bytes - 1;
+	}
+
+	/* result fits in less bytes */
+	extra = cell->bytes - DIV_ROUND_UP(cell->nbits, BITS_PER_BYTE);
+	while (--extra >= 0)
+		*p-- = 0;
+
+	/* clear msb bits if any leftover in the last byte */
+	if (cell->nbits % BITS_PER_BYTE)
+		*p &= GENMASK((cell->nbits % BITS_PER_BYTE) - 1, 0);
+}
+
+static int __nvmem_cell_read(struct nvmem_device *nvmem,
+			     struct nvmem_cell_entry *cell,
+			     void *buf, size_t *len, const char *id, int index)
+{
+	int rc;
+
+	rc = nvmem_reg_read(nvmem, cell->offset, buf, cell->raw_len);
+
+	if (rc)
+		return rc;
+
+	/* shift bits in-place */
+	if (cell->bit_offset || cell->nbits)
+		nvmem_shift_read_buffer_in_place(cell, buf);
+
+	if (cell->read_post_process) {
+		rc = cell->read_post_process(cell->priv, id, index,
+					     cell->offset, buf, cell->raw_len);
+		if (rc)
+			return rc;
+	}
+
+	if (len)
+		*len = cell->bytes;
+
+	return 0;
+}
+
+/**
+ * nvmem_cell_read() - Read a given nvmem cell
+ *
+ * @cell: nvmem cell to be read.
+ * @len: pointer to length of cell which will be populated on successful read;
+ *	 can be NULL.
+ *
+ * Return: ERR_PTR() on error or a valid pointer to a buffer on success. The
+ * buffer should be freed by the consumer with a kfree().
+ */
+void *nvmem_cell_read(struct nvmem_cell *cell, size_t *len)
+{
+	struct nvmem_cell_entry *entry = cell->entry;
+	struct nvmem_device *nvmem = entry->nvmem;
+	u8 *buf;
+	int rc;
+
+	if (!nvmem)
+		return ERR_PTR(-EINVAL);
+
+	buf = kzalloc(max_t(size_t, entry->raw_len, entry->bytes), GFP_KERNEL);
+	if (!buf)
+		return ERR_PTR(-ENOMEM);
+
+	rc = __nvmem_cell_read(nvmem, cell->entry, buf, len, cell->id, cell->index);
+	if (rc) {
+		kfree(buf);
+		return ERR_PTR(rc);
+	}
+
+	return buf;
+}
+EXPORT_SYMBOL_GPL(nvmem_cell_read);
+
+static void *nvmem_cell_prepare_write_buffer(struct nvmem_cell_entry *cell,
+					     u8 *_buf, int len)
+{
+	struct nvmem_device *nvmem = cell->nvmem;
+	int i, rc, nbits, bit_offset = cell->bit_offset;
+	u8 v, *p, *buf, *b, pbyte, pbits;
+
+	nbits = cell->nbits;
+	buf = kzalloc(cell->bytes, GFP_KERNEL);
+	if (!buf)
+		return ERR_PTR(-ENOMEM);
+
+	memcpy(buf, _buf, len);
+	p = b = buf;
+
+	if (bit_offset) {
+		pbyte = *b;
+		*b <<= bit_offset;
+
+		/* setup the first byte with lsb bits from nvmem */
+		rc = nvmem_reg_read(nvmem, cell->offset, &v, 1);
+		if (rc)
+			goto err;
+		*b++ |= GENMASK(bit_offset - 1, 0) & v;
+
+		/* setup rest of the byte if any */
+		for (i = 1; i < cell->bytes; i++) {
+			/* Get last byte bits and shift them towards lsb */
+			pbits = pbyte >> (BITS_PER_BYTE - 1 - bit_offset);
+			pbyte = *b;
+			p = b;
+			*b <<= bit_offset;
+			*b++ |= pbits;
+		}
+	}
+
+	/* if it's not end on byte boundary */
+	if ((nbits + bit_offset) % BITS_PER_BYTE) {
+		/* setup the last byte with msb bits from nvmem */
+		rc = nvmem_reg_read(nvmem,
+				    cell->offset + cell->bytes - 1, &v, 1);
+		if (rc)
+			goto err;
+		*p |= GENMASK(7, (nbits + bit_offset) % BITS_PER_BYTE) & v;
+
+	}
+
+	return buf;
+err:
+	kfree(buf);
+	return ERR_PTR(rc);
+}
+
+static int __nvmem_cell_entry_write(struct nvmem_cell_entry *cell, void *buf, size_t len)
+{
+	struct nvmem_device *nvmem = cell->nvmem;
+	int rc;
+
+	if (!nvmem || nvmem->read_only ||
+	    (cell->bit_offset == 0 && len != cell->bytes))
+		return -EINVAL;
+
+	/*
+	 * Any cells which have a read_post_process hook are read-only because
+	 * we cannot reverse the operation and it might affect other cells,
+	 * too.
+	 */
+	if (cell->read_post_process)
+		return -EINVAL;
+
+	if (cell->bit_offset || cell->nbits) {
+		if (len != BITS_TO_BYTES(cell->nbits) && len != cell->bytes)
+			return -EINVAL;
+		buf = nvmem_cell_prepare_write_buffer(cell, buf, len);
+		if (IS_ERR(buf))
+			return PTR_ERR(buf);
+	}
+
+	rc = nvmem_reg_write(nvmem, cell->offset, buf, cell->bytes);
+
+	/* free the tmp buffer */
+	if (cell->bit_offset || cell->nbits)
+		kfree(buf);
+
+	if (rc)
+		return rc;
+
+	return len;
+}
+
+/**
+ * nvmem_cell_write() - Write to a given nvmem cell
+ *
+ * @cell: nvmem cell to be written.
+ * @buf: Buffer to be written.
+ * @len: length of buffer to be written to nvmem cell.
+ *
+ * Return: length of bytes written or negative on failure.
+ */
+int nvmem_cell_write(struct nvmem_cell *cell, void *buf, size_t len)
+{
+	return __nvmem_cell_entry_write(cell->entry, buf, len);
+}
+
+EXPORT_SYMBOL_GPL(nvmem_cell_write);
+
+static int nvmem_cell_read_common(struct device *dev, const char *cell_id,
+				  void *val, size_t count)
+{
+	struct nvmem_cell *cell;
+	void *buf;
+	size_t len;
+
+	cell = nvmem_cell_get(dev, cell_id);
+	if (IS_ERR(cell))
+		return PTR_ERR(cell);
+
+	buf = nvmem_cell_read(cell, &len);
+	if (IS_ERR(buf)) {
+		nvmem_cell_put(cell);
+		return PTR_ERR(buf);
+	}
+	if (len != count) {
+		kfree(buf);
+		nvmem_cell_put(cell);
+		return -EINVAL;
+	}
+	memcpy(val, buf, count);
+	kfree(buf);
+	nvmem_cell_put(cell);
+
+	return 0;
+}
+
+/**
+ * nvmem_cell_read_u8() - Read a cell value as a u8
+ *
+ * @dev: Device that requests the nvmem cell.
+ * @cell_id: Name of nvmem cell to read.
+ * @val: pointer to output value.
+ *
+ * Return: 0 on success or negative errno.
+ */
+int nvmem_cell_read_u8(struct device *dev, const char *cell_id, u8 *val)
+{
+	return nvmem_cell_read_common(dev, cell_id, val, sizeof(*val));
+}
+EXPORT_SYMBOL_GPL(nvmem_cell_read_u8);
+
+/**
+ * nvmem_cell_read_u16() - Read a cell value as a u16
+ *
+ * @dev: Device that requests the nvmem cell.
+ * @cell_id: Name of nvmem cell to read.
+ * @val: pointer to output value.
+ *
+ * Return: 0 on success or negative errno.
+ */
+int nvmem_cell_read_u16(struct device *dev, const char *cell_id, u16 *val)
+{
+	return nvmem_cell_read_common(dev, cell_id, val, sizeof(*val));
+}
+EXPORT_SYMBOL_GPL(nvmem_cell_read_u16);
+
+/**
+ * nvmem_cell_read_u32() - Read a cell value as a u32
+ *
+ * @dev: Device that requests the nvmem cell.
+ * @cell_id: Name of nvmem cell to read.
+ * @val: pointer to output value.
+ *
+ * Return: 0 on success or negative errno.
+ */
+int nvmem_cell_read_u32(struct device *dev, const char *cell_id, u32 *val)
+{
+	return nvmem_cell_read_common(dev, cell_id, val, sizeof(*val));
+}
+EXPORT_SYMBOL_GPL(nvmem_cell_read_u32);
+
+/**
+ * nvmem_cell_read_u64() - Read a cell value as a u64
+ *
+ * @dev: Device that requests the nvmem cell.
+ * @cell_id: Name of nvmem cell to read.
+ * @val: pointer to output value.
+ *
+ * Return: 0 on success or negative errno.
+ */
+int nvmem_cell_read_u64(struct device *dev, const char *cell_id, u64 *val)
+{
+	return nvmem_cell_read_common(dev, cell_id, val, sizeof(*val));
+}
+EXPORT_SYMBOL_GPL(nvmem_cell_read_u64);
+
+static const void *nvmem_cell_read_variable_common(struct device *dev,
+						   const char *cell_id,
+						   size_t max_len, size_t *len)
+{
+	struct nvmem_cell *cell;
+	int nbits;
+	void *buf;
+
+	cell = nvmem_cell_get(dev, cell_id);
+	if (IS_ERR(cell))
+		return cell;
+
+	nbits = cell->entry->nbits;
+	buf = nvmem_cell_read(cell, len);
+	nvmem_cell_put(cell);
+	if (IS_ERR(buf))
+		return buf;
+
+	/*
+	 * If nbits is set then nvmem_cell_read() can significantly exaggerate
+	 * the length of the real data. Throw away the extra junk.
+	 */
+	if (nbits)
+		*len = DIV_ROUND_UP(nbits, 8);
+
+	if (*len > max_len) {
+		kfree(buf);
+		return ERR_PTR(-ERANGE);
+	}
+
+	return buf;
+}
+
+/**
+ * nvmem_cell_read_variable_le_u32() - Read up to 32-bits of data as a little endian number.
+ *
+ * @dev: Device that requests the nvmem cell.
+ * @cell_id: Name of nvmem cell to read.
+ * @val: pointer to output value.
+ *
+ * Return: 0 on success or negative errno.
+ */
+int nvmem_cell_read_variable_le_u32(struct device *dev, const char *cell_id,
+				    u32 *val)
+{
+	size_t len;
+	const u8 *buf;
+	int i;
+
+	buf = nvmem_cell_read_variable_common(dev, cell_id, sizeof(*val), &len);
+	if (IS_ERR(buf))
+		return PTR_ERR(buf);
+
+	/* Copy w/ implicit endian conversion */
+	*val = 0;
+	for (i = 0; i < len; i++)
+		*val |= buf[i] << (8 * i);
+
+	kfree(buf);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(nvmem_cell_read_variable_le_u32);
+
+/**
+ * nvmem_cell_read_variable_le_u64() - Read up to 64-bits of data as a little endian number.
+ *
+ * @dev: Device that requests the nvmem cell.
+ * @cell_id: Name of nvmem cell to read.
+ * @val: pointer to output value.
+ *
+ * Return: 0 on success or negative errno.
+ */
+int nvmem_cell_read_variable_le_u64(struct device *dev, const char *cell_id,
+				    u64 *val)
+{
+	size_t len;
+	const u8 *buf;
+	int i;
+
+	buf = nvmem_cell_read_variable_common(dev, cell_id, sizeof(*val), &len);
+	if (IS_ERR(buf))
+		return PTR_ERR(buf);
+
+	/* Copy w/ implicit endian conversion */
+	*val = 0;
+	for (i = 0; i < len; i++)
+		*val |= (uint64_t)buf[i] << (8 * i);
+
+	kfree(buf);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(nvmem_cell_read_variable_le_u64);
+
+/**
+ * nvmem_device_cell_read() - Read a given nvmem device and cell
+ *
+ * @nvmem: nvmem device to read from.
+ * @info: nvmem cell info to be read.
+ * @buf: buffer pointer which will be populated on successful read.
+ *
+ * Return: length of successful bytes read on success and negative
+ * error code on error.
+ */
+ssize_t nvmem_device_cell_read(struct nvmem_device *nvmem,
+			   struct nvmem_cell_info *info, void *buf)
+{
+	struct nvmem_cell_entry cell;
+	int rc;
+	ssize_t len;
+
+	if (!nvmem)
+		return -EINVAL;
+
+	rc = nvmem_cell_info_to_nvmem_cell_entry_nodup(nvmem, info, &cell);
+	if (rc)
+		return rc;
+
+	rc = __nvmem_cell_read(nvmem, &cell, buf, &len, NULL, 0);
+	if (rc)
+		return rc;
+
+	return len;
+}
+EXPORT_SYMBOL_GPL(nvmem_device_cell_read);
+
+/**
+ * nvmem_device_cell_write() - Write cell to a given nvmem device
+ *
+ * @nvmem: nvmem device to be written to.
+ * @info: nvmem cell info to be written.
+ * @buf: buffer to be written to cell.
+ *
+ * Return: length of bytes written or negative error code on failure.
+ */
+int nvmem_device_cell_write(struct nvmem_device *nvmem,
+			    struct nvmem_cell_info *info, void *buf)
+{
+	struct nvmem_cell_entry cell;
+	int rc;
+
+	if (!nvmem)
+		return -EINVAL;
+
+	rc = nvmem_cell_info_to_nvmem_cell_entry_nodup(nvmem, info, &cell);
+	if (rc)
+		return rc;
+
+	return __nvmem_cell_entry_write(&cell, buf, cell.bytes);
+}
+EXPORT_SYMBOL_GPL(nvmem_device_cell_write);
+
+/**
+ * nvmem_device_read() - Read from a given nvmem device
+ *
+ * @nvmem: nvmem device to read from.
+ * @offset: offset in nvmem device.
+ * @bytes: number of bytes to read.
+ * @buf: buffer pointer which will be populated on successful read.
+ *
+ * Return: length of successful bytes read on success and negative
+ * error code on error.
+ */
+int nvmem_device_read(struct nvmem_device *nvmem,
+		      unsigned int offset,
+		      size_t bytes, void *buf)
+{
+	int rc;
+
+	if (!nvmem)
+		return -EINVAL;
+
+	rc = nvmem_reg_read(nvmem, offset, buf, bytes);
+
+	if (rc)
+		return rc;
+
+	return bytes;
+}
+EXPORT_SYMBOL_GPL(nvmem_device_read);
+
+/**
+ * nvmem_device_write() - Write cell to a given nvmem device
+ *
+ * @nvmem: nvmem device to be written to.
+ * @offset: offset in nvmem device.
+ * @bytes: number of bytes to write.
+ * @buf: buffer to be written.
+ *
+ * Return: length of bytes written or negative error code on failure.
+ */
+int nvmem_device_write(struct nvmem_device *nvmem,
+		       unsigned int offset,
+		       size_t bytes, void *buf)
+{
+	int rc;
+
+	if (!nvmem)
+		return -EINVAL;
+
+	rc = nvmem_reg_write(nvmem, offset, buf, bytes);
+
+	if (rc)
+		return rc;
+
+
+	return bytes;
+}
+EXPORT_SYMBOL_GPL(nvmem_device_write);
+
+/**
+ * nvmem_add_cell_lookups() - register a list of cell lookup entries
+ *
+ * @entries: array of cell lookup entries
+ * @nentries: number of cell lookup entries in the array
+ */
+void nvmem_add_cell_lookups(struct nvmem_cell_lookup *entries, size_t nentries)
+{
+	int i;
+
+	guard(mutex)(&nvmem_lookup_mutex);
+
+	for (i = 0; i < nentries; i++)
+		list_add_tail(&entries[i].node, &nvmem_lookup_list);
+}
+EXPORT_SYMBOL_GPL(nvmem_add_cell_lookups);
+
+/**
+ * nvmem_del_cell_lookups() - remove a list of previously added cell lookup
+ *                            entries
+ *
+ * @entries: array of cell lookup entries
+ * @nentries: number of cell lookup entries in the array
+ */
+void nvmem_del_cell_lookups(struct nvmem_cell_lookup *entries, size_t nentries)
+{
+	int i;
+
+	guard(mutex)(&nvmem_lookup_mutex);
+
+	for (i = 0; i < nentries; i++)
+		list_del(&entries[i].node);
+}
+EXPORT_SYMBOL_GPL(nvmem_del_cell_lookups);
+
+/**
+ * nvmem_dev_name() - Get the name of a given nvmem device.
+ *
+ * @nvmem: nvmem device.
+ *
+ * Return: name of the nvmem device.
+ */
+const char *nvmem_dev_name(struct nvmem_device *nvmem)
+{
+	return dev_name(&nvmem->dev);
+}
+EXPORT_SYMBOL_GPL(nvmem_dev_name);
+
+/**
+ * nvmem_dev_size() - Get the size of a given nvmem device.
+ *
+ * @nvmem: nvmem device.
+ *
+ * Return: size of the nvmem device.
+ */
+size_t nvmem_dev_size(struct nvmem_device *nvmem)
+{
+	return nvmem->size;
+}
+EXPORT_SYMBOL_GPL(nvmem_dev_size);
+
+static int __init nvmem_init(void)
+{
+	int ret;
+
+	ret = bus_register(&nvmem_bus_type);
+	if (ret)
+		return ret;
+
+	ret = nvmem_layout_bus_register();
+	if (ret)
+		bus_unregister(&nvmem_bus_type);
+
+	return ret;
+}
+
+static void __exit nvmem_exit(void)
+{
+	nvmem_layout_bus_unregister();
+	bus_unregister(&nvmem_bus_type);
+}
+
+subsys_initcall(nvmem_init);
+module_exit(nvmem_exit);
+
+MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@linaro.org>");
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
+MODULE_DESCRIPTION("nvmem Driver Core");
diff --git a/drivers/nvmem/ee1004.c b/drivers/nvmem/ee1004.c
new file mode 100644
index 000000000..923f404a4
--- /dev/null
+++ b/drivers/nvmem/ee1004.c
@@ -0,0 +1,351 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ee1004 - driver for DDR4 SPD EEPROMs
+ *
+ * Copyright (C) 2017-2019 Jean Delvare
+ *
+ * Based on the at24 driver:
+ * Copyright (C) 2005-2007 David Brownell
+ * Copyright (C) 2008 Wolfram Sang, Pengutronix
+ */
+
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/nvmem-provider.h>
+
+/*
+ * DDR4 memory modules use special EEPROMs following the Jedec EE1004
+ * specification. These are 512-byte EEPROMs using a single I2C address
+ * in the 0x50-0x57 range for data. One of two 256-byte page is selected
+ * by writing a command to I2C address 0x36 or 0x37 on the same I2C bus.
+ *
+ * Therefore we need to request these 2 additional addresses, and serialize
+ * access to all such EEPROMs with a single mutex.
+ *
+ * We assume it is safe to read up to 32 bytes at once from these EEPROMs.
+ * We use SMBus access even if I2C is available, these EEPROMs are small
+ * enough, and reading from them infrequent enough, that we favor simplicity
+ * over performance.
+ */
+
+#define EE1004_MAX_BUSSES		8
+#define EE1004_ADDR_SET_PAGE		0x36
+#define EE1004_NUM_PAGES		2
+#define EE1004_PAGE_SIZE		256
+#define EE1004_PAGE_SHIFT		8
+#define EE1004_EEPROM_SIZE		(EE1004_PAGE_SIZE * EE1004_NUM_PAGES)
+
+/*
+ * Mutex protects ee1004_set_page and ee1004_dev_count, and must be held
+ * from page selection to end of read.
+ */
+static DEFINE_MUTEX(ee1004_bus_lock);
+
+static struct ee1004_bus_data {
+	struct i2c_adapter *adap;
+	struct i2c_client *set_page[EE1004_NUM_PAGES];
+	unsigned int dev_count;
+	int current_page;
+} ee1004_bus_data[EE1004_MAX_BUSSES];
+
+static const struct i2c_device_id ee1004_ids[] = {
+	{ "ee1004" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ee1004_ids);
+
+/*-------------------------------------------------------------------------*/
+
+static struct ee1004_bus_data *ee1004_get_bus_data(struct i2c_adapter *adap)
+{
+	int i;
+
+	for (i = 0; i < EE1004_MAX_BUSSES; i++)
+		if (ee1004_bus_data[i].adap == adap)
+			return ee1004_bus_data + i;
+
+	/* If not existent yet, create new entry */
+	for (i = 0; i < EE1004_MAX_BUSSES; i++)
+		if (!ee1004_bus_data[i].adap) {
+			ee1004_bus_data[i].adap = adap;
+			return ee1004_bus_data + i;
+		}
+
+	return NULL;
+}
+
+static int ee1004_get_current_page(struct ee1004_bus_data *bd)
+{
+	int err;
+
+	err = i2c_smbus_read_byte(bd->set_page[0]);
+	if (err == -ENXIO) {
+		/* Nack means page 1 is selected */
+		return 1;
+	}
+	if (err < 0) {
+		/* Anything else is a real error, bail out */
+		return err;
+	}
+
+	/* Ack means page 0 is selected, returned value meaningless */
+	return 0;
+}
+
+static int ee1004_set_current_page(struct i2c_client *client, int page)
+{
+	struct ee1004_bus_data *bd = i2c_get_clientdata(client);
+	int ret;
+
+	if (page == bd->current_page)
+		return 0;
+
+	/* Data is ignored */
+	ret = i2c_smbus_write_byte(bd->set_page[page], 0x00);
+	/*
+	 * Don't give up just yet. Some memory modules will select the page
+	 * but not ack the command. Check which page is selected now.
+	 */
+	if (ret == -ENXIO && ee1004_get_current_page(bd) == page)
+		ret = 0;
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to select page %d (%d)\n", page, ret);
+		return ret;
+	}
+
+	dev_dbg(&client->dev, "Selected page %d\n", page);
+	bd->current_page = page;
+
+	return 0;
+}
+
+static ssize_t ee1004_eeprom_read(struct i2c_client *client, char *buf,
+				  unsigned int offset, size_t count)
+{
+	int status, page;
+
+	page = offset >> EE1004_PAGE_SHIFT;
+	offset &= (1 << EE1004_PAGE_SHIFT) - 1;
+
+	status = ee1004_set_current_page(client, page);
+	if (status)
+		return status;
+
+	/* Can't cross page boundaries */
+	if (offset + count > EE1004_PAGE_SIZE)
+		count = EE1004_PAGE_SIZE - offset;
+
+	if (count > I2C_SMBUS_BLOCK_MAX)
+		count = I2C_SMBUS_BLOCK_MAX;
+
+	return i2c_smbus_read_i2c_block_data_or_emulated(client, offset, count, buf);
+}
+
+static int ee1004_read(void *priv, unsigned int off, void *val, size_t count)
+{
+	struct i2c_client *client = priv;
+	char *buf = val;
+	int ret;
+
+	if (unlikely(!count))
+		return count;
+
+	if (off + count > EE1004_EEPROM_SIZE)
+		return -EINVAL;
+
+	/*
+	 * Read data from chip, protecting against concurrent access to
+	 * other EE1004 SPD EEPROMs on the same adapter.
+	 */
+	mutex_lock(&ee1004_bus_lock);
+
+	while (count) {
+		ret = ee1004_eeprom_read(client, buf, off, count);
+		if (ret < 0) {
+			mutex_unlock(&ee1004_bus_lock);
+			return ret;
+		}
+
+		buf += ret;
+		off += ret;
+		count -= ret;
+	}
+
+	mutex_unlock(&ee1004_bus_lock);
+
+	return 0;
+}
+
+static void ee1004_probe_temp_sensor(struct i2c_client *client)
+{
+	struct i2c_board_info info = { .type = "jc42" };
+	unsigned short addr = 0x18 | (client->addr & 7);
+	unsigned short addr_list[] = { addr, I2C_CLIENT_END };
+	u8 data[2];
+	int ret;
+
+	/* byte 14, bit 7 is set if temp sensor is present */
+	ret = ee1004_eeprom_read(client, data, 14, 1);
+	if (ret != 1)
+		return;
+
+	if (!(data[0] & BIT(7))) {
+		/*
+		 * If the SPD data suggests that there is no temperature
+		 * sensor, it may still be there for SPD revision 1.0.
+		 * See SPD Annex L, Revision 1 and 2, for details.
+		 * Check DIMM type and SPD revision; if it is a DDR4
+		 * with SPD revision 1.0, check the thermal sensor address
+		 * and instantiate the jc42 driver if a chip is found at
+		 * that address.
+		 * It is not necessary to check if there is a chip at the
+		 * temperature sensor address since i2c_new_scanned_device()
+		 * will do that and return silently if no chip is found.
+		 */
+		ret = ee1004_eeprom_read(client, data, 1, 2);
+		if (ret != 2 || data[0] != 0x10 || data[1] != 0x0c)
+			return;
+	}
+	i2c_new_scanned_device(client->adapter, &info, addr_list, NULL);
+}
+
+static void ee1004_cleanup(int idx, struct ee1004_bus_data *bd)
+{
+	if (--bd->dev_count == 0) {
+		while (--idx >= 0)
+			i2c_unregister_device(bd->set_page[idx]);
+		memset(bd, 0, sizeof(struct ee1004_bus_data));
+	}
+}
+
+static void ee1004_cleanup_bus_data(void *data)
+{
+	struct ee1004_bus_data *bd = data;
+
+	/* Remove page select clients if this is the last device */
+	mutex_lock(&ee1004_bus_lock);
+	ee1004_cleanup(EE1004_NUM_PAGES, bd);
+	mutex_unlock(&ee1004_bus_lock);
+}
+
+static int ee1004_init_bus_data(struct i2c_client *client)
+{
+	struct ee1004_bus_data *bd;
+	int err, cnr = 0;
+
+	bd = ee1004_get_bus_data(client->adapter);
+	if (!bd)
+		return dev_err_probe(&client->dev, -ENOSPC, "Only %d busses supported",
+				     EE1004_MAX_BUSSES);
+
+	i2c_set_clientdata(client, bd);
+
+	if (++bd->dev_count == 1) {
+		/* Use 2 dummy devices for page select command */
+		for (cnr = 0; cnr < EE1004_NUM_PAGES; cnr++) {
+			struct i2c_client *cl;
+
+			cl = i2c_new_dummy_device(client->adapter, EE1004_ADDR_SET_PAGE + cnr);
+			if (IS_ERR(cl)) {
+				err = PTR_ERR(cl);
+				goto err_out;
+			}
+
+			bd->set_page[cnr] = cl;
+		}
+
+		/* Remember current page to avoid unneeded page select */
+		err = ee1004_get_current_page(bd);
+		if (err < 0)
+			goto err_out;
+
+		dev_dbg(&client->dev, "Currently selected page: %d\n", err);
+		bd->current_page = err;
+	}
+
+	return 0;
+
+err_out:
+	ee1004_cleanup(cnr, bd);
+
+	return err;
+}
+
+static int ee1004_probe(struct i2c_client *client)
+{
+	struct nvmem_config config = {
+		.dev = &client->dev,
+		.name = dev_name(&client->dev),
+		.id = NVMEM_DEVID_NONE,
+		.owner = THIS_MODULE,
+		.type = NVMEM_TYPE_EEPROM,
+		.read_only = true,
+		.root_only = false,
+		.reg_read = ee1004_read,
+		.size = EE1004_EEPROM_SIZE,
+		.word_size = 1,
+		.stride = 1,
+		.priv = client,
+		.compat = true,
+		.base_dev = &client->dev,
+	};
+	struct nvmem_device *ndev;
+	int err;
+
+	/* Make sure we can operate on this adapter */
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_READ_I2C_BLOCK) &&
+	    !i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_READ_BYTE_DATA))
+		return -EPFNOSUPPORT;
+
+	err = i2c_smbus_read_byte(client);
+	if (err < 0)
+		return -ENODEV;
+
+	mutex_lock(&ee1004_bus_lock);
+
+	err = ee1004_init_bus_data(client);
+	if (err < 0) {
+		mutex_unlock(&ee1004_bus_lock);
+		return err;
+	}
+
+	ee1004_probe_temp_sensor(client);
+
+	mutex_unlock(&ee1004_bus_lock);
+
+	err = devm_add_action_or_reset(&client->dev, ee1004_cleanup_bus_data,
+				       i2c_get_clientdata(client));
+	if (err < 0)
+		return err;
+
+	ndev = devm_nvmem_register(&client->dev, &config);
+	if (IS_ERR(ndev))
+		return PTR_ERR(ndev);
+
+	dev_info(&client->dev,
+		 "%u byte EE1004-compliant SPD EEPROM, read-only\n",
+		 EE1004_EEPROM_SIZE);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct i2c_driver ee1004_driver = {
+	.driver = {
+		.name = "ee1004",
+	},
+	.probe = ee1004_probe,
+	.id_table = ee1004_ids,
+};
+module_i2c_driver(ee1004_driver);
+
+MODULE_DESCRIPTION("Driver for EE1004-compliant DDR4 SPD EEPROMs");
+MODULE_AUTHOR("Jean Delvare");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/eeprom_93xx46.c b/drivers/nvmem/eeprom_93xx46.c
new file mode 100644
index 000000000..f9c3ab52c
--- /dev/null
+++ b/drivers/nvmem/eeprom_93xx46.c
@@ -0,0 +1,560 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for 93xx46 EEPROMs
+ *
+ * (C) 2011 DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
+ */
+
+#include <linux/array_size.h>
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kstrtox.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/string_choices.h>
+
+#include <linux/nvmem-provider.h>
+
+struct eeprom_93xx46_platform_data {
+	unsigned char	flags;
+#define EE_ADDR8	0x01		/*  8 bit addr. cfg */
+#define EE_ADDR16	0x02		/* 16 bit addr. cfg */
+#define EE_READONLY	0x08		/* forbid writing */
+#define EE_SIZE1K	0x10		/* 1 kb of data, that is a 93xx46 */
+#define EE_SIZE2K	0x20		/* 2 kb of data, that is a 93xx56 */
+#define EE_SIZE4K	0x40		/* 4 kb of data, that is a 93xx66 */
+
+	unsigned int	quirks;
+/* Single word read transfers only; no sequential read. */
+#define EEPROM_93XX46_QUIRK_SINGLE_WORD_READ		(1 << 0)
+/* Instructions such as EWEN are (addrlen + 2) in length. */
+#define EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH		(1 << 1)
+/* Add extra cycle after address during a read */
+#define EEPROM_93XX46_QUIRK_EXTRA_READ_CYCLE		BIT(2)
+
+	struct gpio_desc *select;
+};
+
+#define OP_START	0x4
+#define OP_WRITE	(OP_START | 0x1)
+#define OP_READ		(OP_START | 0x2)
+/* The following addresses are offset for the 1K EEPROM variant in 16-bit mode */
+#define ADDR_EWDS	0x00
+#define ADDR_ERAL	0x20
+#define ADDR_EWEN	0x30
+
+struct eeprom_93xx46_devtype_data {
+	unsigned int quirks;
+	unsigned char flags;
+};
+
+static const struct eeprom_93xx46_devtype_data at93c46_data = {
+	.flags = EE_SIZE1K,
+};
+
+static const struct eeprom_93xx46_devtype_data at93c56_data = {
+	.flags = EE_SIZE2K,
+};
+
+static const struct eeprom_93xx46_devtype_data at93c66_data = {
+	.flags = EE_SIZE4K,
+};
+
+static const struct eeprom_93xx46_devtype_data atmel_at93c46d_data = {
+	.flags = EE_SIZE1K,
+	.quirks = EEPROM_93XX46_QUIRK_SINGLE_WORD_READ |
+		  EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH,
+};
+
+static const struct eeprom_93xx46_devtype_data microchip_93lc46b_data = {
+	.flags = EE_SIZE1K,
+	.quirks = EEPROM_93XX46_QUIRK_EXTRA_READ_CYCLE,
+};
+
+struct eeprom_93xx46_dev {
+	struct spi_device *spi;
+	struct eeprom_93xx46_platform_data *pdata;
+	struct mutex lock;
+	struct nvmem_config nvmem_config;
+	struct nvmem_device *nvmem;
+	int addrlen;
+	int size;
+};
+
+static inline bool has_quirk_single_word_read(struct eeprom_93xx46_dev *edev)
+{
+	return edev->pdata->quirks & EEPROM_93XX46_QUIRK_SINGLE_WORD_READ;
+}
+
+static inline bool has_quirk_instruction_length(struct eeprom_93xx46_dev *edev)
+{
+	return edev->pdata->quirks & EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH;
+}
+
+static inline bool has_quirk_extra_read_cycle(struct eeprom_93xx46_dev *edev)
+{
+	return edev->pdata->quirks & EEPROM_93XX46_QUIRK_EXTRA_READ_CYCLE;
+}
+
+static int eeprom_93xx46_read(void *priv, unsigned int off,
+			      void *val, size_t count)
+{
+	struct eeprom_93xx46_dev *edev = priv;
+	char *buf = val;
+	int err = 0;
+	int bits;
+
+	if (unlikely(off >= edev->size))
+		return 0;
+	if ((off + count) > edev->size)
+		count = edev->size - off;
+	if (unlikely(!count))
+		return count;
+
+	mutex_lock(&edev->lock);
+
+	gpiod_set_value_cansleep(edev->pdata->select, 1);
+
+	/* The opcode in front of the address is three bits. */
+	bits = edev->addrlen + 3;
+
+	while (count) {
+		struct spi_message m;
+		struct spi_transfer t[2] = {};
+		u16 cmd_addr = OP_READ << edev->addrlen;
+		size_t nbytes = count;
+
+		if (edev->pdata->flags & EE_ADDR8) {
+			cmd_addr |= off;
+			if (has_quirk_single_word_read(edev))
+				nbytes = 1;
+		} else {
+			cmd_addr |= (off >> 1);
+			if (has_quirk_single_word_read(edev))
+				nbytes = 2;
+		}
+
+		dev_dbg(&edev->spi->dev, "read cmd 0x%x, %d Hz\n",
+			cmd_addr, edev->spi->max_speed_hz);
+
+		if (has_quirk_extra_read_cycle(edev)) {
+			cmd_addr <<= 1;
+			bits += 1;
+		}
+
+		t[0].tx_buf = (char *)&cmd_addr;
+		t[0].len = 2;
+		t[0].bits_per_word = bits;
+
+		t[1].rx_buf = buf;
+		t[1].len = count;
+		t[1].bits_per_word = 8;
+
+		spi_message_init_with_transfers(&m, t, ARRAY_SIZE(t));
+
+		err = spi_sync(edev->spi, &m);
+		/* have to wait at least Tcsl ns */
+		ndelay(250);
+
+		if (err) {
+			dev_err(&edev->spi->dev, "read %zu bytes at %u: err. %d\n",
+				nbytes, off, err);
+			break;
+		}
+
+		buf += nbytes;
+		off += nbytes;
+		count -= nbytes;
+	}
+
+	gpiod_set_value_cansleep(edev->pdata->select, 0);
+
+	mutex_unlock(&edev->lock);
+
+	return err;
+}
+
+static int eeprom_93xx46_ew(struct eeprom_93xx46_dev *edev, int is_on)
+{
+	struct spi_message m;
+	struct spi_transfer t = {};
+	int bits, ret;
+	u16 cmd_addr;
+
+	/* The opcode in front of the address is three bits. */
+	bits = edev->addrlen + 3;
+
+	cmd_addr = OP_START << edev->addrlen;
+	cmd_addr |= (is_on ? ADDR_EWEN : ADDR_EWDS) << (edev->addrlen - 6);
+
+	if (has_quirk_instruction_length(edev)) {
+		cmd_addr <<= 2;
+		bits += 2;
+	}
+
+	dev_dbg(&edev->spi->dev, "ew %s cmd 0x%04x, %d bits\n",
+		str_enable_disable(is_on), cmd_addr, bits);
+
+	t.tx_buf = &cmd_addr;
+	t.len = 2;
+	t.bits_per_word = bits;
+
+	spi_message_init_with_transfers(&m, &t, 1);
+
+	mutex_lock(&edev->lock);
+
+	gpiod_set_value_cansleep(edev->pdata->select, 1);
+
+	ret = spi_sync(edev->spi, &m);
+	/* have to wait at least Tcsl ns */
+	ndelay(250);
+	if (ret)
+		dev_err(&edev->spi->dev, "erase/write %s error %d\n",
+			str_enable_disable(is_on), ret);
+
+	gpiod_set_value_cansleep(edev->pdata->select, 0);
+
+	mutex_unlock(&edev->lock);
+	return ret;
+}
+
+static ssize_t
+eeprom_93xx46_write_word(struct eeprom_93xx46_dev *edev,
+			 const char *buf, unsigned int off)
+{
+	struct spi_message m;
+	struct spi_transfer t[2] = {};
+	int bits, data_len, ret;
+	u16 cmd_addr;
+
+	if (unlikely(off >= edev->size))
+		return -EINVAL;
+
+	/* The opcode in front of the address is three bits. */
+	bits = edev->addrlen + 3;
+
+	cmd_addr = OP_WRITE << edev->addrlen;
+
+	if (edev->pdata->flags & EE_ADDR8) {
+		cmd_addr |= off;
+		data_len = 1;
+	} else {
+		cmd_addr |= (off >> 1);
+		data_len = 2;
+	}
+
+	dev_dbg(&edev->spi->dev, "write cmd 0x%x\n", cmd_addr);
+
+	t[0].tx_buf = (char *)&cmd_addr;
+	t[0].len = 2;
+	t[0].bits_per_word = bits;
+
+	t[1].tx_buf = buf;
+	t[1].len = data_len;
+	t[1].bits_per_word = 8;
+
+	spi_message_init_with_transfers(&m, t, ARRAY_SIZE(t));
+
+	ret = spi_sync(edev->spi, &m);
+	/* have to wait program cycle time Twc ms */
+	mdelay(6);
+	return ret;
+}
+
+static int eeprom_93xx46_write(void *priv, unsigned int off,
+				   void *val, size_t count)
+{
+	struct eeprom_93xx46_dev *edev = priv;
+	char *buf = val;
+	int ret, step = 1;
+	unsigned int i;
+
+	if (unlikely(off >= edev->size))
+		return -EFBIG;
+	if ((off + count) > edev->size)
+		count = edev->size - off;
+	if (unlikely(!count))
+		return count;
+
+	/* only write even number of bytes on 16-bit devices */
+	if (edev->pdata->flags & EE_ADDR16) {
+		step = 2;
+		count &= ~1;
+	}
+
+	/* erase/write enable */
+	ret = eeprom_93xx46_ew(edev, 1);
+	if (ret)
+		return ret;
+
+	mutex_lock(&edev->lock);
+
+	gpiod_set_value_cansleep(edev->pdata->select, 1);
+
+	for (i = 0; i < count; i += step) {
+		ret = eeprom_93xx46_write_word(edev, &buf[i], off + i);
+		if (ret) {
+			dev_err(&edev->spi->dev, "write failed at %u: %d\n", off + i, ret);
+			break;
+		}
+	}
+
+	gpiod_set_value_cansleep(edev->pdata->select, 0);
+
+	mutex_unlock(&edev->lock);
+
+	/* erase/write disable */
+	eeprom_93xx46_ew(edev, 0);
+	return ret;
+}
+
+static int eeprom_93xx46_eral(struct eeprom_93xx46_dev *edev)
+{
+	struct spi_message m;
+	struct spi_transfer t = {};
+	int bits, ret;
+	u16 cmd_addr;
+
+	/* The opcode in front of the address is three bits. */
+	bits = edev->addrlen + 3;
+
+	cmd_addr = OP_START << edev->addrlen;
+	cmd_addr |= ADDR_ERAL << (edev->addrlen - 6);
+
+	if (has_quirk_instruction_length(edev)) {
+		cmd_addr <<= 2;
+		bits += 2;
+	}
+
+	dev_dbg(&edev->spi->dev, "eral cmd 0x%04x, %d bits\n", cmd_addr, bits);
+
+	t.tx_buf = &cmd_addr;
+	t.len = 2;
+	t.bits_per_word = bits;
+
+	spi_message_init_with_transfers(&m, &t, 1);
+
+	mutex_lock(&edev->lock);
+
+	gpiod_set_value_cansleep(edev->pdata->select, 1);
+
+	ret = spi_sync(edev->spi, &m);
+	if (ret)
+		dev_err(&edev->spi->dev, "erase error %d\n", ret);
+	/* have to wait erase cycle time Tec ms */
+	mdelay(6);
+
+	gpiod_set_value_cansleep(edev->pdata->select, 0);
+
+	mutex_unlock(&edev->lock);
+	return ret;
+}
+
+static ssize_t erase_store(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct eeprom_93xx46_dev *edev = dev_get_drvdata(dev);
+	bool erase;
+	int ret;
+
+	ret = kstrtobool(buf, &erase);
+	if (ret)
+		return ret;
+
+	if (erase) {
+		ret = eeprom_93xx46_ew(edev, 1);
+		if (ret)
+			return ret;
+		ret = eeprom_93xx46_eral(edev);
+		if (ret)
+			return ret;
+		ret = eeprom_93xx46_ew(edev, 0);
+		if (ret)
+			return ret;
+	}
+	return count;
+}
+static DEVICE_ATTR_WO(erase);
+
+static const struct of_device_id eeprom_93xx46_of_table[] = {
+	{ .compatible = "eeprom-93xx46", .data = &at93c46_data, },
+	{ .compatible = "atmel,at93c46", .data = &at93c46_data, },
+	{ .compatible = "atmel,at93c46d", .data = &atmel_at93c46d_data, },
+	{ .compatible = "atmel,at93c56", .data = &at93c56_data, },
+	{ .compatible = "atmel,at93c66", .data = &at93c66_data, },
+	{ .compatible = "microchip,93lc46b", .data = &microchip_93lc46b_data, },
+	{}
+};
+MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table);
+
+static const struct spi_device_id eeprom_93xx46_spi_ids[] = {
+	{ .name = "eeprom-93xx46",
+	  .driver_data = (kernel_ulong_t)&at93c46_data, },
+	{ .name = "at93c46",
+	  .driver_data = (kernel_ulong_t)&at93c46_data, },
+	{ .name = "at93c46d",
+	  .driver_data = (kernel_ulong_t)&atmel_at93c46d_data, },
+	{ .name = "at93c56",
+	  .driver_data = (kernel_ulong_t)&at93c56_data, },
+	{ .name = "at93c66",
+	  .driver_data = (kernel_ulong_t)&at93c66_data, },
+	{ .name = "93lc46b",
+	  .driver_data = (kernel_ulong_t)&microchip_93lc46b_data, },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, eeprom_93xx46_spi_ids);
+
+static int eeprom_93xx46_probe_fw(struct device *dev)
+{
+	const struct eeprom_93xx46_devtype_data *data;
+	struct eeprom_93xx46_platform_data *pd;
+	u32 tmp;
+	int ret;
+
+	pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+	if (!pd)
+		return -ENOMEM;
+
+	ret = device_property_read_u32(dev, "data-size", &tmp);
+	if (ret < 0) {
+		dev_err(dev, "data-size property not found\n");
+		return ret;
+	}
+
+	if (tmp == 8) {
+		pd->flags |= EE_ADDR8;
+	} else if (tmp == 16) {
+		pd->flags |= EE_ADDR16;
+	} else {
+		dev_err(dev, "invalid data-size (%d)\n", tmp);
+		return -EINVAL;
+	}
+
+	if (device_property_read_bool(dev, "read-only"))
+		pd->flags |= EE_READONLY;
+
+	pd->select = devm_gpiod_get_optional(dev, "select", GPIOD_OUT_LOW);
+	if (IS_ERR(pd->select))
+		return PTR_ERR(pd->select);
+	gpiod_set_consumer_name(pd->select, "93xx46 EEPROMs OE");
+
+	data = spi_get_device_match_data(to_spi_device(dev));
+	if (data) {
+		pd->quirks = data->quirks;
+		pd->flags |= data->flags;
+	}
+
+	dev->platform_data = pd;
+
+	return 0;
+}
+
+static int eeprom_93xx46_probe(struct spi_device *spi)
+{
+	struct eeprom_93xx46_platform_data *pd;
+	struct eeprom_93xx46_dev *edev;
+	struct device *dev = &spi->dev;
+	int err;
+
+	err = eeprom_93xx46_probe_fw(dev);
+	if (err < 0)
+		return err;
+
+	pd = spi->dev.platform_data;
+	if (!pd) {
+		dev_err(&spi->dev, "missing platform data\n");
+		return -ENODEV;
+	}
+
+	edev = devm_kzalloc(&spi->dev, sizeof(*edev), GFP_KERNEL);
+	if (!edev)
+		return -ENOMEM;
+
+	if (pd->flags & EE_SIZE1K)
+		edev->size = 128;
+	else if (pd->flags & EE_SIZE2K)
+		edev->size = 256;
+	else if (pd->flags & EE_SIZE4K)
+		edev->size = 512;
+	else {
+		dev_err(&spi->dev, "unspecified size\n");
+		return -EINVAL;
+	}
+
+	if (pd->flags & EE_ADDR8)
+		edev->addrlen = ilog2(edev->size);
+	else if (pd->flags & EE_ADDR16)
+		edev->addrlen = ilog2(edev->size) - 1;
+	else {
+		dev_err(&spi->dev, "unspecified address type\n");
+		return -EINVAL;
+	}
+
+	mutex_init(&edev->lock);
+
+	edev->spi = spi;
+	edev->pdata = pd;
+
+	edev->nvmem_config.type = NVMEM_TYPE_EEPROM;
+	edev->nvmem_config.name = dev_name(&spi->dev);
+	edev->nvmem_config.dev = &spi->dev;
+	edev->nvmem_config.read_only = pd->flags & EE_READONLY;
+	edev->nvmem_config.root_only = true;
+	edev->nvmem_config.owner = THIS_MODULE;
+	edev->nvmem_config.compat = true;
+	edev->nvmem_config.base_dev = &spi->dev;
+	edev->nvmem_config.reg_read = eeprom_93xx46_read;
+	edev->nvmem_config.reg_write = eeprom_93xx46_write;
+	edev->nvmem_config.priv = edev;
+	edev->nvmem_config.stride = 4;
+	edev->nvmem_config.word_size = 1;
+	edev->nvmem_config.size = edev->size;
+
+	edev->nvmem = devm_nvmem_register(&spi->dev, &edev->nvmem_config);
+	if (IS_ERR(edev->nvmem))
+		return PTR_ERR(edev->nvmem);
+
+	dev_info(&spi->dev, "%d-bit eeprom containing %d bytes %s\n",
+		(pd->flags & EE_ADDR8) ? 8 : 16,
+		edev->size,
+		(pd->flags & EE_READONLY) ? "(readonly)" : "");
+
+	if (!(pd->flags & EE_READONLY)) {
+		if (device_create_file(&spi->dev, &dev_attr_erase))
+			dev_err(&spi->dev, "can't create erase interface\n");
+	}
+
+	spi_set_drvdata(spi, edev);
+	return 0;
+}
+
+static void eeprom_93xx46_remove(struct spi_device *spi)
+{
+	struct eeprom_93xx46_dev *edev = spi_get_drvdata(spi);
+
+	if (!(edev->pdata->flags & EE_READONLY))
+		device_remove_file(&spi->dev, &dev_attr_erase);
+}
+
+static struct spi_driver eeprom_93xx46_driver = {
+	.driver = {
+		.name	= "93xx46",
+		.of_match_table = eeprom_93xx46_of_table,
+	},
+	.probe		= eeprom_93xx46_probe,
+	.remove		= eeprom_93xx46_remove,
+	.id_table	= eeprom_93xx46_spi_ids,
+};
+
+module_spi_driver(eeprom_93xx46_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Driver for 93xx46 EEPROMs");
+MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
+MODULE_ALIAS("spi:93xx46");
diff --git a/drivers/nvmem/imx-iim.c b/drivers/nvmem/imx-iim.c
new file mode 100644
index 000000000..8cfbe55a5
--- /dev/null
+++ b/drivers/nvmem/imx-iim.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * i.MX IIM driver
+ *
+ * Copyright (c) 2017 Pengutronix, Michael Grzeschik <m.grzeschik@pengutronix.de>
+ *
+ * Based on the barebox iim driver,
+ * Copyright (c) 2010 Baruch Siach <baruch@tkos.co.il>,
+ *	Orex Computed Radiography
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+
+#define IIM_BANK_BASE(n)	(0x800 + 0x400 * (n))
+
+struct imx_iim_drvdata {
+	unsigned int nregs;
+};
+
+struct iim_priv {
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static int imx_iim_read(void *context, unsigned int offset,
+			  void *buf, size_t bytes)
+{
+	struct iim_priv *iim = context;
+	int i, ret;
+	u8 *buf8 = buf;
+
+	ret = clk_prepare_enable(iim->clk);
+	if (ret)
+		return ret;
+
+	for (i = offset; i < offset + bytes; i++) {
+		int bank = i >> 5;
+		int reg = i & 0x1f;
+
+		*buf8++ = readl(iim->base + IIM_BANK_BASE(bank) + reg * 4);
+	}
+
+	clk_disable_unprepare(iim->clk);
+
+	return 0;
+}
+
+static struct imx_iim_drvdata imx27_drvdata = {
+	.nregs = 2 * 32,
+};
+
+static struct imx_iim_drvdata imx25_imx31_imx35_drvdata = {
+	.nregs = 3 * 32,
+};
+
+static struct imx_iim_drvdata imx51_drvdata = {
+	.nregs = 4 * 32,
+};
+
+static struct imx_iim_drvdata imx53_drvdata = {
+	.nregs = 4 * 32 + 16,
+};
+
+static const struct of_device_id imx_iim_dt_ids[] = {
+	{
+		.compatible = "fsl,imx25-iim",
+		.data = &imx25_imx31_imx35_drvdata,
+	}, {
+		.compatible = "fsl,imx27-iim",
+		.data = &imx27_drvdata,
+	}, {
+		.compatible = "fsl,imx31-iim",
+		.data = &imx25_imx31_imx35_drvdata,
+	}, {
+		.compatible = "fsl,imx35-iim",
+		.data = &imx25_imx31_imx35_drvdata,
+	}, {
+		.compatible = "fsl,imx51-iim",
+		.data = &imx51_drvdata,
+	}, {
+		.compatible = "fsl,imx53-iim",
+		.data = &imx53_drvdata,
+	}, {
+		/* sentinel */
+	},
+};
+MODULE_DEVICE_TABLE(of, imx_iim_dt_ids);
+
+static int imx_iim_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct iim_priv *iim;
+	struct nvmem_device *nvmem;
+	struct nvmem_config cfg = {};
+	const struct imx_iim_drvdata *drvdata = NULL;
+
+	iim = devm_kzalloc(dev, sizeof(*iim), GFP_KERNEL);
+	if (!iim)
+		return -ENOMEM;
+
+	iim->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(iim->base))
+		return PTR_ERR(iim->base);
+
+	drvdata = of_device_get_match_data(&pdev->dev);
+
+	iim->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(iim->clk))
+		return PTR_ERR(iim->clk);
+
+	cfg.name = "imx-iim";
+	cfg.read_only = true;
+	cfg.word_size = 1;
+	cfg.stride = 1;
+	cfg.reg_read = imx_iim_read;
+	cfg.dev = dev;
+	cfg.size = drvdata->nregs;
+	cfg.priv = iim;
+
+	nvmem = devm_nvmem_register(dev, &cfg);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static struct platform_driver imx_iim_driver = {
+	.probe	= imx_iim_probe,
+	.driver = {
+		.name	= "imx-iim",
+		.of_match_table = imx_iim_dt_ids,
+	},
+};
+module_platform_driver(imx_iim_driver);
+
+MODULE_AUTHOR("Michael Grzeschik <m.grzeschik@pengutronix.de>");
+MODULE_DESCRIPTION("i.MX IIM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/imx-ocotp-ele.c b/drivers/nvmem/imx-ocotp-ele.c
new file mode 100644
index 000000000..a0d2985c6
--- /dev/null
+++ b/drivers/nvmem/imx-ocotp-ele.c
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * i.MX9 OCOTP fusebox driver
+ *
+ * Copyright 2023 NXP
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/if_ether.h>	/* ETH_ALEN */
+
+enum fuse_type {
+	FUSE_FSB = BIT(0),
+	FUSE_ELE = BIT(1),
+	FUSE_ECC = BIT(2),
+	FUSE_INVALID = -1
+};
+
+struct ocotp_map_entry {
+	u32 start; /* start word */
+	u32 num; /* num words */
+	enum fuse_type type;
+};
+
+struct ocotp_devtype_data {
+	u32 reg_off;
+	char *name;
+	u32 size;
+	u32 num_entry;
+	u32 flag;
+	nvmem_reg_read_t reg_read;
+	struct ocotp_map_entry entry[];
+};
+
+struct imx_ocotp_priv {
+	struct device *dev;
+	void __iomem *base;
+	struct nvmem_config config;
+	struct mutex lock;
+	const struct ocotp_devtype_data *data;
+};
+
+static enum fuse_type imx_ocotp_fuse_type(void *context, u32 index)
+{
+	struct imx_ocotp_priv *priv = context;
+	const struct ocotp_devtype_data *data = priv->data;
+	u32 start, end;
+	int i;
+
+	for (i = 0; i < data->num_entry; i++) {
+		start = data->entry[i].start;
+		end = data->entry[i].start + data->entry[i].num;
+
+		if (index >= start && index < end)
+			return data->entry[i].type;
+	}
+
+	return FUSE_INVALID;
+}
+
+static int imx_ocotp_reg_read(void *context, unsigned int offset, void *val, size_t bytes)
+{
+	struct imx_ocotp_priv *priv = context;
+	void __iomem *reg = priv->base + priv->data->reg_off;
+	u32 count, index, num_bytes;
+	enum fuse_type type;
+	u32 *buf;
+	void *p;
+	int i;
+	u8 skipbytes;
+
+	if (offset + bytes > priv->data->size)
+		bytes = priv->data->size - offset;
+
+	index = offset >> 2;
+	skipbytes = offset - (index << 2);
+	num_bytes = round_up(bytes + skipbytes, 4);
+	count = num_bytes >> 2;
+
+	p = kzalloc(num_bytes, GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	mutex_lock(&priv->lock);
+
+	buf = p;
+
+	for (i = index; i < (index + count); i++) {
+		type = imx_ocotp_fuse_type(context, i);
+		if (type == FUSE_INVALID || type == FUSE_ELE) {
+			*buf++ = 0;
+			continue;
+		}
+
+		if (type & FUSE_ECC)
+			*buf++ = readl_relaxed(reg + (i << 2)) & GENMASK(15, 0);
+		else
+			*buf++ = readl_relaxed(reg + (i << 2));
+	}
+
+	memcpy(val, ((u8 *)p) + skipbytes, bytes);
+
+	mutex_unlock(&priv->lock);
+
+	kfree(p);
+
+	return 0;
+};
+
+static int imx_ocotp_cell_pp(void *context, const char *id, int index,
+			     unsigned int offset, void *data, size_t bytes)
+{
+	u8 *buf = data;
+	int i;
+
+	/* Deal with some post processing of nvmem cell data */
+	if (id && !strcmp(id, "mac-address")) {
+		bytes = min(bytes, ETH_ALEN);
+		for (i = 0; i < bytes / 2; i++)
+			swap(buf[i], buf[bytes - i - 1]);
+	}
+
+	return 0;
+}
+
+static void imx_ocotp_fixup_dt_cell_info(struct nvmem_device *nvmem,
+					 struct nvmem_cell_info *cell)
+{
+	cell->raw_len = round_up(cell->bytes, 4);
+	cell->read_post_process = imx_ocotp_cell_pp;
+}
+
+static int imx_ele_ocotp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct imx_ocotp_priv *priv;
+	struct nvmem_device *nvmem;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->data = of_device_get_match_data(dev);
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->config.dev = dev;
+	priv->config.name = "ELE-OCOTP";
+	priv->config.id = NVMEM_DEVID_AUTO;
+	priv->config.owner = THIS_MODULE;
+	priv->config.size = priv->data->size;
+	priv->config.reg_read = priv->data->reg_read;
+	priv->config.word_size = 1;
+	priv->config.stride = 1;
+	priv->config.priv = priv;
+	priv->config.read_only = true;
+	priv->config.add_legacy_fixed_of_cells = true;
+	priv->config.fixup_dt_cell_info = imx_ocotp_fixup_dt_cell_info;
+	mutex_init(&priv->lock);
+
+	nvmem = devm_nvmem_register(dev, &priv->config);
+	if (IS_ERR(nvmem))
+		return PTR_ERR(nvmem);
+
+	return 0;
+}
+
+static const struct ocotp_devtype_data imx93_ocotp_data = {
+	.reg_off = 0x8000,
+	.reg_read = imx_ocotp_reg_read,
+	.size = 2048,
+	.num_entry = 6,
+	.entry = {
+		{ 0, 52, FUSE_FSB },
+		{ 63, 1, FUSE_ELE},
+		{ 128, 16, FUSE_ELE },
+		{ 182, 1, FUSE_ELE },
+		{ 188, 1, FUSE_ELE },
+		{ 312, 200, FUSE_FSB }
+	},
+};
+
+static const struct ocotp_devtype_data imx94_ocotp_data = {
+	.reg_off = 0x8000,
+	.reg_read = imx_ocotp_reg_read,
+	.size = 3296, /* 103 Banks */
+	.num_entry = 10,
+	.entry = {
+		{ 0, 1, FUSE_FSB | FUSE_ECC },
+		{ 7, 1, FUSE_FSB | FUSE_ECC },
+		{ 9, 3, FUSE_FSB | FUSE_ECC },
+		{ 12, 24, FUSE_FSB },
+		{ 36, 2, FUSE_FSB  | FUSE_ECC },
+		{ 38, 14, FUSE_FSB },
+		{ 59, 1, FUSE_ELE },
+		{ 525, 2, FUSE_FSB | FUSE_ECC },
+		{ 528, 7, FUSE_FSB },
+		{ 536, 280, FUSE_FSB },
+	},
+};
+
+static const struct ocotp_devtype_data imx95_ocotp_data = {
+	.reg_off = 0x8000,
+	.reg_read = imx_ocotp_reg_read,
+	.size = 2048,
+	.num_entry = 12,
+	.entry = {
+		{ 0, 1, FUSE_FSB | FUSE_ECC },
+		{ 7, 1, FUSE_FSB | FUSE_ECC },
+		{ 9, 3, FUSE_FSB | FUSE_ECC },
+		{ 12, 24, FUSE_FSB },
+		{ 36, 2, FUSE_FSB  | FUSE_ECC },
+		{ 38, 14, FUSE_FSB },
+		{ 63, 1, FUSE_ELE },
+		{ 128, 16, FUSE_ELE },
+		{ 188, 1, FUSE_ELE },
+		{ 317, 2, FUSE_FSB | FUSE_ECC },
+		{ 320, 7, FUSE_FSB },
+		{ 328, 184, FUSE_FSB }
+	},
+};
+
+static const struct of_device_id imx_ele_ocotp_dt_ids[] = {
+	{ .compatible = "fsl,imx93-ocotp", .data = &imx93_ocotp_data, },
+	{ .compatible = "fsl,imx94-ocotp", .data = &imx94_ocotp_data, },
+	{ .compatible = "fsl,imx95-ocotp", .data = &imx95_ocotp_data, },
+	{},
+};
+MODULE_DEVICE_TABLE(of, imx_ele_ocotp_dt_ids);
+
+static struct platform_driver imx_ele_ocotp_driver = {
+	.driver = {
+		.name = "imx_ele_ocotp",
+		.of_match_table = imx_ele_ocotp_dt_ids,
+	},
+	.probe = imx_ele_ocotp_probe,
+};
+module_platform_driver(imx_ele_ocotp_driver);
+
+MODULE_DESCRIPTION("i.MX OCOTP/ELE driver");
+MODULE_AUTHOR("Peng Fan <peng.fan@nxp.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/imx-ocotp-scu.c b/drivers/nvmem/imx-ocotp-scu.c
new file mode 100644
index 000000000..517d83e11
--- /dev/null
+++ b/drivers/nvmem/imx-ocotp-scu.c
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * i.MX8 OCOTP fusebox driver
+ *
+ * Copyright 2019 NXP
+ *
+ * Peng Fan <peng.fan@nxp.com>
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/firmware/imx/sci.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define IMX_SIP_OTP_WRITE		0xc200000B
+
+enum ocotp_devtype {
+	IMX8QXP,
+	IMX8QM,
+};
+
+#define ECC_REGION	BIT(0)
+#define HOLE_REGION	BIT(1)
+
+struct ocotp_region {
+	u32 start;
+	u32 end;
+	u32 flag;
+};
+
+struct ocotp_devtype_data {
+	int devtype;
+	int nregs;
+	u32 num_region;
+	struct ocotp_region region[];
+};
+
+struct ocotp_priv {
+	struct device *dev;
+	const struct ocotp_devtype_data *data;
+	struct imx_sc_ipc *nvmem_ipc;
+};
+
+struct imx_sc_msg_misc_fuse_read {
+	struct imx_sc_rpc_msg hdr;
+	u32 word;
+} __packed;
+
+static DEFINE_MUTEX(scu_ocotp_mutex);
+
+static struct ocotp_devtype_data imx8qxp_data = {
+	.devtype = IMX8QXP,
+	.nregs = 800,
+	.num_region = 3,
+	.region = {
+		{0x10, 0x10f, ECC_REGION},
+		{0x110, 0x21F, HOLE_REGION},
+		{0x220, 0x31F, ECC_REGION},
+	},
+};
+
+static struct ocotp_devtype_data imx8qm_data = {
+	.devtype = IMX8QM,
+	.nregs = 800,
+	.num_region = 2,
+	.region = {
+		{0x10, 0x10f, ECC_REGION},
+		{0x1a0, 0x1ff, ECC_REGION},
+	},
+};
+
+static bool in_hole(void *context, u32 index)
+{
+	struct ocotp_priv *priv = context;
+	const struct ocotp_devtype_data *data = priv->data;
+	int i;
+
+	for (i = 0; i < data->num_region; i++) {
+		if (data->region[i].flag & HOLE_REGION) {
+			if ((index >= data->region[i].start) &&
+			    (index <= data->region[i].end))
+				return true;
+		}
+	}
+
+	return false;
+}
+
+static bool in_ecc(void *context, u32 index)
+{
+	struct ocotp_priv *priv = context;
+	const struct ocotp_devtype_data *data = priv->data;
+	int i;
+
+	for (i = 0; i < data->num_region; i++) {
+		if (data->region[i].flag & ECC_REGION) {
+			if ((index >= data->region[i].start) &&
+			    (index <= data->region[i].end))
+				return true;
+		}
+	}
+
+	return false;
+}
+
+static int imx_sc_misc_otp_fuse_read(struct imx_sc_ipc *ipc, u32 word,
+				     u32 *val)
+{
+	struct imx_sc_msg_misc_fuse_read msg;
+	struct imx_sc_rpc_msg *hdr = &msg.hdr;
+	int ret;
+
+	hdr->ver = IMX_SC_RPC_VERSION;
+	hdr->svc = IMX_SC_RPC_SVC_MISC;
+	hdr->func = IMX_SC_MISC_FUNC_OTP_FUSE_READ;
+	hdr->size = 2;
+
+	msg.word = word;
+
+	ret = imx_scu_call_rpc(ipc, &msg, true);
+	if (ret)
+		return ret;
+
+	*val = msg.word;
+
+	return 0;
+}
+
+static int imx_scu_ocotp_read(void *context, unsigned int offset,
+			      void *val, size_t bytes)
+{
+	struct ocotp_priv *priv = context;
+	u32 count, index, num_bytes;
+	u32 *buf;
+	void *p;
+	int i, ret;
+
+	index = offset;
+	num_bytes = round_up(bytes, 4);
+	count = num_bytes >> 2;
+
+	if (count > (priv->data->nregs - index))
+		count = priv->data->nregs - index;
+
+	p = kzalloc(num_bytes, GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	mutex_lock(&scu_ocotp_mutex);
+
+	buf = p;
+
+	for (i = index; i < (index + count); i++) {
+		if (in_hole(context, i)) {
+			*buf++ = 0;
+			continue;
+		}
+
+		ret = imx_sc_misc_otp_fuse_read(priv->nvmem_ipc, i, buf);
+		if (ret) {
+			mutex_unlock(&scu_ocotp_mutex);
+			kfree(p);
+			return ret;
+		}
+		buf++;
+	}
+
+	memcpy(val, (u8 *)p, bytes);
+
+	mutex_unlock(&scu_ocotp_mutex);
+
+	kfree(p);
+
+	return 0;
+}
+
+static int imx_scu_ocotp_write(void *context, unsigned int offset,
+			       void *val, size_t bytes)
+{
+	struct ocotp_priv *priv = context;
+	struct arm_smccc_res res;
+	u32 *buf = val;
+	u32 tmp;
+	u32 index;
+	int ret;
+
+	/* allow only writing one complete OTP word at a time */
+	if (bytes != 4)
+		return -EINVAL;
+
+	index = offset;
+
+	if (in_hole(context, index))
+		return -EINVAL;
+
+	if (in_ecc(context, index)) {
+		pr_warn("ECC region, only program once\n");
+		mutex_lock(&scu_ocotp_mutex);
+		ret = imx_sc_misc_otp_fuse_read(priv->nvmem_ipc, index, &tmp);
+		mutex_unlock(&scu_ocotp_mutex);
+		if (ret)
+			return ret;
+		if (tmp) {
+			pr_warn("ECC region, already has value: %x\n", tmp);
+			return -EIO;
+		}
+	}
+
+	mutex_lock(&scu_ocotp_mutex);
+
+	arm_smccc_smc(IMX_SIP_OTP_WRITE, index, *buf, 0, 0, 0, 0, 0, &res);
+
+	mutex_unlock(&scu_ocotp_mutex);
+
+	return res.a0;
+}
+
+static struct nvmem_config imx_scu_ocotp_nvmem_config = {
+	.name = "imx-scu-ocotp",
+	.add_legacy_fixed_of_cells = true,
+	.read_only = false,
+	.word_size = 4,
+	.stride = 1,
+	.owner = THIS_MODULE,
+	.reg_read = imx_scu_ocotp_read,
+	.reg_write = imx_scu_ocotp_write,
+};
+
+static const struct of_device_id imx_scu_ocotp_dt_ids[] = {
+	{ .compatible = "fsl,imx8qxp-scu-ocotp", (void *)&imx8qxp_data },
+	{ .compatible = "fsl,imx8qm-scu-ocotp", (void *)&imx8qm_data },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, imx_scu_ocotp_dt_ids);
+
+static int imx_scu_ocotp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ocotp_priv *priv;
+	struct nvmem_device *nvmem;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	ret = imx_scu_get_handle(&priv->nvmem_ipc);
+	if (ret)
+		return ret;
+
+	priv->data = of_device_get_match_data(dev);
+	priv->dev = dev;
+	imx_scu_ocotp_nvmem_config.size = 4 * priv->data->nregs;
+	imx_scu_ocotp_nvmem_config.dev = dev;
+	imx_scu_ocotp_nvmem_config.priv = priv;
+	nvmem = devm_nvmem_register(dev, &imx_scu_ocotp_nvmem_config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static struct platform_driver imx_scu_ocotp_driver = {
+	.probe	= imx_scu_ocotp_probe,
+	.driver = {
+		.name	= "imx_scu_ocotp",
+		.of_match_table = imx_scu_ocotp_dt_ids,
+	},
+};
+module_platform_driver(imx_scu_ocotp_driver);
+
+MODULE_AUTHOR("Peng Fan <peng.fan@nxp.com>");
+MODULE_DESCRIPTION("i.MX8 SCU OCOTP fuse box driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
new file mode 100644
index 000000000..108d78d7f
--- /dev/null
+++ b/drivers/nvmem/imx-ocotp.c
@@ -0,0 +1,645 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * i.MX6 OCOTP fusebox driver
+ *
+ * Copyright (c) 2015 Pengutronix, Philipp Zabel <p.zabel@pengutronix.de>
+ *
+ * Copyright 2019 NXP
+ *
+ * Based on the barebox ocotp driver,
+ * Copyright (c) 2010 Baruch Siach <baruch@tkos.co.il>,
+ *	Orex Computed Radiography
+ *
+ * Write support based on the fsl_otp driver,
+ * Copyright (C) 2010-2013 Freescale Semiconductor, Inc
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/if_ether.h>	/* ETH_ALEN */
+
+#define IMX_OCOTP_OFFSET_B0W0		0x400 /* Offset from base address of the
+					       * OTP Bank0 Word0
+					       */
+#define IMX_OCOTP_OFFSET_PER_WORD	0x10  /* Offset between the start addr
+					       * of two consecutive OTP words.
+					       */
+
+#define IMX_OCOTP_ADDR_CTRL		0x0000
+#define IMX_OCOTP_ADDR_CTRL_SET		0x0004
+#define IMX_OCOTP_ADDR_CTRL_CLR		0x0008
+#define IMX_OCOTP_ADDR_TIMING		0x0010
+#define IMX_OCOTP_ADDR_DATA0		0x0020
+#define IMX_OCOTP_ADDR_DATA1		0x0030
+#define IMX_OCOTP_ADDR_DATA2		0x0040
+#define IMX_OCOTP_ADDR_DATA3		0x0050
+
+#define IMX_OCOTP_BM_CTRL_ADDR		0x000000FF
+#define IMX_OCOTP_BM_CTRL_BUSY		0x00000100
+#define IMX_OCOTP_BM_CTRL_ERROR		0x00000200
+#define IMX_OCOTP_BM_CTRL_REL_SHADOWS	0x00000400
+
+#define IMX_OCOTP_BM_CTRL_ADDR_8MP		0x000001FF
+#define IMX_OCOTP_BM_CTRL_BUSY_8MP		0x00000200
+#define IMX_OCOTP_BM_CTRL_ERROR_8MP		0x00000400
+#define IMX_OCOTP_BM_CTRL_REL_SHADOWS_8MP	0x00000800
+
+#define IMX_OCOTP_BM_CTRL_DEFAULT				\
+	{							\
+		.bm_addr = IMX_OCOTP_BM_CTRL_ADDR,		\
+		.bm_busy = IMX_OCOTP_BM_CTRL_BUSY,		\
+		.bm_error = IMX_OCOTP_BM_CTRL_ERROR,		\
+		.bm_rel_shadows = IMX_OCOTP_BM_CTRL_REL_SHADOWS,\
+	}
+
+#define IMX_OCOTP_BM_CTRL_8MP					\
+	{							\
+		.bm_addr = IMX_OCOTP_BM_CTRL_ADDR_8MP,		\
+		.bm_busy = IMX_OCOTP_BM_CTRL_BUSY_8MP,		\
+		.bm_error = IMX_OCOTP_BM_CTRL_ERROR_8MP,	\
+		.bm_rel_shadows = IMX_OCOTP_BM_CTRL_REL_SHADOWS_8MP,\
+	}
+
+#define TIMING_STROBE_PROG_US		10	/* Min time to blow a fuse */
+#define TIMING_STROBE_READ_NS		37	/* Min time before read */
+#define TIMING_RELAX_NS			17
+#define DEF_FSOURCE			1001	/* > 1000 ns */
+#define DEF_STROBE_PROG			10000	/* IPG clocks */
+#define IMX_OCOTP_WR_UNLOCK		0x3E770000
+#define IMX_OCOTP_READ_LOCKED_VAL	0xBADABADA
+
+static DEFINE_MUTEX(ocotp_mutex);
+
+struct ocotp_priv {
+	struct device *dev;
+	struct clk *clk;
+	void __iomem *base;
+	const struct ocotp_params *params;
+	struct nvmem_config *config;
+};
+
+struct ocotp_ctrl_reg {
+	u32 bm_addr;
+	u32 bm_busy;
+	u32 bm_error;
+	u32 bm_rel_shadows;
+};
+
+struct ocotp_params {
+	unsigned int nregs;
+	unsigned int bank_address_words;
+	void (*set_timing)(struct ocotp_priv *priv);
+	struct ocotp_ctrl_reg ctrl;
+};
+
+static int imx_ocotp_wait_for_busy(struct ocotp_priv *priv, u32 flags)
+{
+	int count;
+	u32 c, mask;
+	u32 bm_ctrl_busy, bm_ctrl_error;
+	void __iomem *base = priv->base;
+
+	bm_ctrl_busy = priv->params->ctrl.bm_busy;
+	bm_ctrl_error = priv->params->ctrl.bm_error;
+
+	mask = bm_ctrl_busy | bm_ctrl_error | flags;
+
+	for (count = 10000; count >= 0; count--) {
+		c = readl(base + IMX_OCOTP_ADDR_CTRL);
+		if (!(c & mask))
+			break;
+		cpu_relax();
+	}
+
+	if (count < 0) {
+		/* HW_OCOTP_CTRL[ERROR] will be set under the following
+		 * conditions:
+		 * - A write is performed to a shadow register during a shadow
+		 *   reload (essentially, while HW_OCOTP_CTRL[RELOAD_SHADOWS] is
+		 *   set. In addition, the contents of the shadow register shall
+		 *   not be updated.
+		 * - A write is performed to a shadow register which has been
+		 *   locked.
+		 * - A read is performed to from a shadow register which has
+		 *   been read locked.
+		 * - A program is performed to a fuse word which has been locked
+		 * - A read is performed to from a fuse word which has been read
+		 *   locked.
+		 */
+		if (c & bm_ctrl_error)
+			return -EPERM;
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static void imx_ocotp_clr_err_if_set(struct ocotp_priv *priv)
+{
+	u32 c, bm_ctrl_error;
+	void __iomem *base = priv->base;
+
+	bm_ctrl_error = priv->params->ctrl.bm_error;
+
+	c = readl(base + IMX_OCOTP_ADDR_CTRL);
+	if (!(c & bm_ctrl_error))
+		return;
+
+	writel(bm_ctrl_error, base + IMX_OCOTP_ADDR_CTRL_CLR);
+}
+
+static int imx_ocotp_read(void *context, unsigned int offset,
+			  void *val, size_t bytes)
+{
+	struct ocotp_priv *priv = context;
+	unsigned int count;
+	u8 *buf, *p;
+	int i, ret;
+	u32 index, num_bytes;
+
+	index = offset >> 2;
+	num_bytes = round_up((offset % 4) + bytes, 4);
+	count = num_bytes >> 2;
+
+	if (count > (priv->params->nregs - index))
+		count = priv->params->nregs - index;
+
+	p = kzalloc(num_bytes, GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	mutex_lock(&ocotp_mutex);
+
+	buf = p;
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret < 0) {
+		mutex_unlock(&ocotp_mutex);
+		dev_err(priv->dev, "failed to prepare/enable ocotp clk\n");
+		kfree(p);
+		return ret;
+	}
+
+	ret = imx_ocotp_wait_for_busy(priv, 0);
+	if (ret < 0) {
+		dev_err(priv->dev, "timeout during read setup\n");
+		goto read_end;
+	}
+
+	for (i = index; i < (index + count); i++) {
+		*(u32 *)buf = readl(priv->base + IMX_OCOTP_OFFSET_B0W0 +
+			       i * IMX_OCOTP_OFFSET_PER_WORD);
+
+		/* 47.3.1.2
+		 * For "read locked" registers 0xBADABADA will be returned and
+		 * HW_OCOTP_CTRL[ERROR] will be set. It must be cleared by
+		 * software before any new write, read or reload access can be
+		 * issued
+		 */
+		if (*((u32 *)buf) == IMX_OCOTP_READ_LOCKED_VAL)
+			imx_ocotp_clr_err_if_set(priv);
+
+		buf += 4;
+	}
+
+	index = offset % 4;
+	memcpy(val, &p[index], bytes);
+
+read_end:
+	clk_disable_unprepare(priv->clk);
+	mutex_unlock(&ocotp_mutex);
+
+	kfree(p);
+
+	return ret;
+}
+
+static int imx_ocotp_cell_pp(void *context, const char *id, int index,
+			     unsigned int offset, void *data, size_t bytes)
+{
+	u8 *buf = data;
+	int i;
+
+	/* Deal with some post processing of nvmem cell data */
+	if (id && !strcmp(id, "mac-address")) {
+		bytes = min(bytes, ETH_ALEN);
+		for (i = 0; i < bytes / 2; i++)
+			swap(buf[i], buf[bytes - i - 1]);
+	}
+
+	return 0;
+}
+
+static void imx_ocotp_set_imx6_timing(struct ocotp_priv *priv)
+{
+	unsigned long clk_rate;
+	unsigned long strobe_read, relax, strobe_prog;
+	u32 timing;
+
+	/* 47.3.1.3.1
+	 * Program HW_OCOTP_TIMING[STROBE_PROG] and HW_OCOTP_TIMING[RELAX]
+	 * fields with timing values to match the current frequency of the
+	 * ipg_clk. OTP writes will work at maximum bus frequencies as long
+	 * as the HW_OCOTP_TIMING parameters are set correctly.
+	 *
+	 * Note: there are minimum timings required to ensure an OTP fuse burns
+	 * correctly that are independent of the ipg_clk. Those values are not
+	 * formally documented anywhere however, working from the minimum
+	 * timings given in u-boot we can say:
+	 *
+	 * - Minimum STROBE_PROG time is 10 microseconds. Intuitively 10
+	 *   microseconds feels about right as representative of a minimum time
+	 *   to physically burn out a fuse.
+	 *
+	 * - Minimum STROBE_READ i.e. the time to wait post OTP fuse burn before
+	 *   performing another read is 37 nanoseconds
+	 *
+	 * - Minimum RELAX timing is 17 nanoseconds. This final RELAX minimum
+	 *   timing is not entirely clear the documentation says "This
+	 *   count value specifies the time to add to all default timing
+	 *   parameters other than the Tpgm and Trd. It is given in number
+	 *   of ipg_clk periods." where Tpgm and Trd refer to STROBE_PROG
+	 *   and STROBE_READ respectively. What the other timing parameters
+	 *   are though, is not specified. Experience shows a zero RELAX
+	 *   value will mess up a re-load of the shadow registers post OTP
+	 *   burn.
+	 */
+	clk_rate = clk_get_rate(priv->clk);
+
+	relax = DIV_ROUND_UP(clk_rate * TIMING_RELAX_NS, 1000000000) - 1;
+	strobe_read = DIV_ROUND_UP(clk_rate * TIMING_STROBE_READ_NS,
+				   1000000000);
+	strobe_read += 2 * (relax + 1) - 1;
+	strobe_prog = DIV_ROUND_CLOSEST(clk_rate * TIMING_STROBE_PROG_US,
+					1000000);
+	strobe_prog += 2 * (relax + 1) - 1;
+
+	timing = readl(priv->base + IMX_OCOTP_ADDR_TIMING) & 0x0FC00000;
+	timing |= strobe_prog & 0x00000FFF;
+	timing |= (relax       << 12) & 0x0000F000;
+	timing |= (strobe_read << 16) & 0x003F0000;
+
+	writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
+}
+
+static void imx_ocotp_set_imx7_timing(struct ocotp_priv *priv)
+{
+	unsigned long clk_rate;
+	u64 fsource, strobe_prog;
+	u32 timing;
+
+	/* i.MX 7Solo Applications Processor Reference Manual, Rev. 0.1
+	 * 6.4.3.3
+	 */
+	clk_rate = clk_get_rate(priv->clk);
+	fsource = DIV_ROUND_UP_ULL((u64)clk_rate * DEF_FSOURCE,
+				   NSEC_PER_SEC) + 1;
+	strobe_prog = DIV_ROUND_CLOSEST_ULL((u64)clk_rate * DEF_STROBE_PROG,
+					    NSEC_PER_SEC) + 1;
+
+	timing = strobe_prog & 0x00000FFF;
+	timing |= (fsource << 12) & 0x000FF000;
+
+	writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
+}
+
+static int imx_ocotp_write(void *context, unsigned int offset, void *val,
+			   size_t bytes)
+{
+	struct ocotp_priv *priv = context;
+	u32 *buf = val;
+	int ret;
+
+	u32 ctrl;
+	u8 waddr;
+	u8 word = 0;
+
+	/* allow only writing one complete OTP word at a time */
+	if ((bytes != priv->config->word_size) ||
+	    (offset % priv->config->word_size))
+		return -EINVAL;
+
+	mutex_lock(&ocotp_mutex);
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret < 0) {
+		mutex_unlock(&ocotp_mutex);
+		dev_err(priv->dev, "failed to prepare/enable ocotp clk\n");
+		return ret;
+	}
+
+	/* Setup the write timing values */
+	priv->params->set_timing(priv);
+
+	/* 47.3.1.3.2
+	 * Check that HW_OCOTP_CTRL[BUSY] and HW_OCOTP_CTRL[ERROR] are clear.
+	 * Overlapped accesses are not supported by the controller. Any pending
+	 * write or reload must be completed before a write access can be
+	 * requested.
+	 */
+	ret = imx_ocotp_wait_for_busy(priv, 0);
+	if (ret < 0) {
+		dev_err(priv->dev, "timeout during timing setup\n");
+		goto write_end;
+	}
+
+	/* 47.3.1.3.3
+	 * Write the requested address to HW_OCOTP_CTRL[ADDR] and program the
+	 * unlock code into HW_OCOTP_CTRL[WR_UNLOCK]. This must be programmed
+	 * for each write access. The lock code is documented in the register
+	 * description. Both the unlock code and address can be written in the
+	 * same operation.
+	 */
+	if (priv->params->bank_address_words != 0) {
+		/*
+		 * In banked/i.MX7 mode the OTP register bank goes into waddr
+		 * see i.MX 7Solo Applications Processor Reference Manual, Rev.
+		 * 0.1 section 6.4.3.1
+		 */
+		offset = offset / priv->config->word_size;
+		waddr = offset / priv->params->bank_address_words;
+		word  = offset & (priv->params->bank_address_words - 1);
+	} else {
+		/*
+		 * Non-banked i.MX6 mode.
+		 * OTP write/read address specifies one of 128 word address
+		 * locations
+		 */
+		waddr = offset / 4;
+	}
+
+	ctrl = readl(priv->base + IMX_OCOTP_ADDR_CTRL);
+	ctrl &= ~priv->params->ctrl.bm_addr;
+	ctrl |= waddr & priv->params->ctrl.bm_addr;
+	ctrl |= IMX_OCOTP_WR_UNLOCK;
+
+	writel(ctrl, priv->base + IMX_OCOTP_ADDR_CTRL);
+
+	/* 47.3.1.3.4
+	 * Write the data to the HW_OCOTP_DATA register. This will automatically
+	 * set HW_OCOTP_CTRL[BUSY] and clear HW_OCOTP_CTRL[WR_UNLOCK]. To
+	 * protect programming same OTP bit twice, before program OCOTP will
+	 * automatically read fuse value in OTP and use read value to mask
+	 * program data. The controller will use masked program data to program
+	 * a 32-bit word in the OTP per the address in HW_OCOTP_CTRL[ADDR]. Bit
+	 * fields with 1's will result in that OTP bit being programmed. Bit
+	 * fields with 0's will be ignored. At the same time that the write is
+	 * accepted, the controller makes an internal copy of
+	 * HW_OCOTP_CTRL[ADDR] which cannot be updated until the next write
+	 * sequence is initiated. This copy guarantees that erroneous writes to
+	 * HW_OCOTP_CTRL[ADDR] will not affect an active write operation. It
+	 * should also be noted that during the programming HW_OCOTP_DATA will
+	 * shift right (with zero fill). This shifting is required to program
+	 * the OTP serially. During the write operation, HW_OCOTP_DATA cannot be
+	 * modified.
+	 * Note: on i.MX7 there are four data fields to write for banked write
+	 *       with the fuse blowing operation only taking place after data0
+	 *	 has been written. This is why data0 must always be the last
+	 *	 register written.
+	 */
+	if (priv->params->bank_address_words != 0) {
+		/* Banked/i.MX7 mode */
+		switch (word) {
+		case 0:
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA1);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA2);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA3);
+			writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA0);
+			break;
+		case 1:
+			writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA1);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA2);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA3);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA0);
+			break;
+		case 2:
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA1);
+			writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA2);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA3);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA0);
+			break;
+		case 3:
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA1);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA2);
+			writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA3);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA0);
+			break;
+		}
+	} else {
+		/* Non-banked i.MX6 mode */
+		writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA0);
+	}
+
+	/* 47.4.1.4.5
+	 * Once complete, the controller will clear BUSY. A write request to a
+	 * protected or locked region will result in no OTP access and no
+	 * setting of HW_OCOTP_CTRL[BUSY]. In addition HW_OCOTP_CTRL[ERROR] will
+	 * be set. It must be cleared by software before any new write access
+	 * can be issued.
+	 */
+	ret = imx_ocotp_wait_for_busy(priv, 0);
+	if (ret < 0) {
+		if (ret == -EPERM) {
+			dev_err(priv->dev, "failed write to locked region");
+			imx_ocotp_clr_err_if_set(priv);
+		} else {
+			dev_err(priv->dev, "timeout during data write\n");
+		}
+		goto write_end;
+	}
+
+	/* 47.3.1.4
+	 * Write Postamble: Due to internal electrical characteristics of the
+	 * OTP during writes, all OTP operations following a write must be
+	 * separated by 2 us after the clearing of HW_OCOTP_CTRL_BUSY following
+	 * the write.
+	 */
+	udelay(2);
+
+	/* reload all shadow registers */
+	writel(priv->params->ctrl.bm_rel_shadows,
+	       priv->base + IMX_OCOTP_ADDR_CTRL_SET);
+	ret = imx_ocotp_wait_for_busy(priv,
+				      priv->params->ctrl.bm_rel_shadows);
+	if (ret < 0)
+		dev_err(priv->dev, "timeout during shadow register reload\n");
+
+write_end:
+	clk_disable_unprepare(priv->clk);
+	mutex_unlock(&ocotp_mutex);
+	return ret < 0 ? ret : bytes;
+}
+
+static struct nvmem_config imx_ocotp_nvmem_config = {
+	.name = "imx-ocotp",
+	.read_only = false,
+	.word_size = 4,
+	.stride = 1,
+	.reg_read = imx_ocotp_read,
+	.reg_write = imx_ocotp_write,
+};
+
+static const struct ocotp_params imx6q_params = {
+	.nregs = 128,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx6sl_params = {
+	.nregs = 64,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx6sll_params = {
+	.nregs = 80,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx6sx_params = {
+	.nregs = 128,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx6ul_params = {
+	.nregs = 144,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx6ull_params = {
+	.nregs = 80,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx7d_params = {
+	.nregs = 64,
+	.bank_address_words = 4,
+	.set_timing = imx_ocotp_set_imx7_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx7ulp_params = {
+	.nregs = 256,
+	.bank_address_words = 0,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx8mq_params = {
+	.nregs = 256,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx8mm_params = {
+	.nregs = 256,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx8mn_params = {
+	.nregs = 256,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx8mp_params = {
+	.nregs = 384,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_8MP,
+};
+
+static const struct of_device_id imx_ocotp_dt_ids[] = {
+	{ .compatible = "fsl,imx6q-ocotp",  .data = &imx6q_params },
+	{ .compatible = "fsl,imx6sl-ocotp", .data = &imx6sl_params },
+	{ .compatible = "fsl,imx6sx-ocotp", .data = &imx6sx_params },
+	{ .compatible = "fsl,imx6ul-ocotp", .data = &imx6ul_params },
+	{ .compatible = "fsl,imx6ull-ocotp", .data = &imx6ull_params },
+	{ .compatible = "fsl,imx7d-ocotp",  .data = &imx7d_params },
+	{ .compatible = "fsl,imx6sll-ocotp", .data = &imx6sll_params },
+	{ .compatible = "fsl,imx7ulp-ocotp", .data = &imx7ulp_params },
+	{ .compatible = "fsl,imx8mq-ocotp", .data = &imx8mq_params },
+	{ .compatible = "fsl,imx8mm-ocotp", .data = &imx8mm_params },
+	{ .compatible = "fsl,imx8mn-ocotp", .data = &imx8mn_params },
+	{ .compatible = "fsl,imx8mp-ocotp", .data = &imx8mp_params },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids);
+
+static void imx_ocotp_fixup_dt_cell_info(struct nvmem_device *nvmem,
+					 struct nvmem_cell_info *cell)
+{
+	cell->raw_len = round_up(cell->bytes, 4);
+	cell->read_post_process = imx_ocotp_cell_pp;
+}
+
+static int imx_ocotp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ocotp_priv *priv;
+	struct nvmem_device *nvmem;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
+	priv->params = of_device_get_match_data(&pdev->dev);
+	imx_ocotp_nvmem_config.add_legacy_fixed_of_cells = true;
+	imx_ocotp_nvmem_config.size = 4 * priv->params->nregs;
+	imx_ocotp_nvmem_config.dev = dev;
+	imx_ocotp_nvmem_config.priv = priv;
+	imx_ocotp_nvmem_config.fixup_dt_cell_info = &imx_ocotp_fixup_dt_cell_info;
+
+	priv->config = &imx_ocotp_nvmem_config;
+
+	clk_prepare_enable(priv->clk);
+	imx_ocotp_clr_err_if_set(priv);
+	clk_disable_unprepare(priv->clk);
+
+	nvmem = devm_nvmem_register(dev, &imx_ocotp_nvmem_config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static struct platform_driver imx_ocotp_driver = {
+	.probe	= imx_ocotp_probe,
+	.driver = {
+		.name	= "imx_ocotp",
+		.of_match_table = imx_ocotp_dt_ids,
+	},
+};
+module_platform_driver(imx_ocotp_driver);
+
+MODULE_AUTHOR("Philipp Zabel <p.zabel@pengutronix.de>");
+MODULE_DESCRIPTION("i.MX6/i.MX7 OCOTP fuse box driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/internals.h b/drivers/nvmem/internals.h
new file mode 100644
index 000000000..4e610deea
--- /dev/null
+++ b/drivers/nvmem/internals.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _LINUX_NVMEM_INTERNALS_H
+#define _LINUX_NVMEM_INTERNALS_H
+
+#include <linux/device.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
+
+/* Hold pointers to callbacks owned by the nvmem provider module. */
+struct nvmem_operations {
+	nvmem_reg_read_t	reg_read;
+	nvmem_reg_write_t	reg_write;
+};
+
+struct nvmem_device {
+	struct module		*owner;
+	struct device		dev;
+	int			stride;
+	int			word_size;
+	int			id;
+	struct kref		refcnt;
+	size_t			size;
+	bool			read_only;
+	bool			root_only;
+	int			flags;
+	enum nvmem_type		type;
+	struct bin_attribute	eeprom;
+	struct device		*base_dev;
+	struct list_head	cells;
+	void (*fixup_dt_cell_info)(struct nvmem_device *nvmem,
+				   struct nvmem_cell_info *cell);
+	const struct nvmem_keepout *keepout;
+	unsigned int		nkeepout;
+	struct gpio_desc	*wp_gpio;
+	struct nvmem_layout	*layout;
+	struct nvmem_operations	*ops;
+	void *priv;
+	bool			sysfs_cells_populated;
+};
+
+int nvmem_add_cells_from_dt(struct nvmem_device *nvmem, struct device_node *np);
+
+#if IS_ENABLED(CONFIG_OF)
+int nvmem_layout_bus_register(void);
+void nvmem_layout_bus_unregister(void);
+int nvmem_populate_layout(struct nvmem_device *nvmem);
+void nvmem_destroy_layout(struct nvmem_device *nvmem);
+#else /* CONFIG_OF */
+static inline int nvmem_layout_bus_register(void)
+{
+	return 0;
+}
+
+static inline void nvmem_layout_bus_unregister(void) {}
+
+static inline int nvmem_populate_layout(struct nvmem_device *nvmem)
+{
+	return 0;
+}
+
+static inline void nvmem_destroy_layout(struct nvmem_device *nvmem) { }
+#endif /* CONFIG_OF */
+
+#endif  /* ifndef _LINUX_NVMEM_INTERNALS_H */
diff --git a/drivers/nvmem/jz4780-efuse.c b/drivers/nvmem/jz4780-efuse.c
new file mode 100644
index 000000000..0b01b840e
--- /dev/null
+++ b/drivers/nvmem/jz4780-efuse.c
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * JZ4780 EFUSE Memory Support driver
+ *
+ * Copyright (c) 2017 PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
+ * Copyright (c) 2020 H. Nikolaus Schaller <hns@goldelico.com>
+ */
+
+/*
+ * Currently supports JZ4780 efuse which has 8K programmable bit.
+ * Efuse is separated into seven segments as below:
+ *
+ * -----------------------------------------------------------------------
+ * | 64 bit | 128 bit | 128 bit | 3520 bit | 8 bit | 2296 bit | 2048 bit |
+ * -----------------------------------------------------------------------
+ *
+ * The rom itself is accessed using a 9 bit address line and an 8 word wide bus
+ * which reads/writes based on strobes. The strobe is configured in the config
+ * register and is based on number of cycles of the bus clock.
+ *
+ * Driver supports read only as the writes are done in the Factory.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/timer.h>
+
+#define JZ_EFUCTRL		(0x0)	/* Control Register */
+#define JZ_EFUCFG		(0x4)	/* Configure Register*/
+#define JZ_EFUSTATE		(0x8)	/* Status Register */
+#define JZ_EFUDATA(n)		(0xC + (n) * 4)
+
+/* We read 32 byte chunks to avoid complexity in the driver. */
+#define JZ_EFU_READ_SIZE 32
+
+#define EFUCTRL_ADDR_MASK	0x3FF
+#define EFUCTRL_ADDR_SHIFT	21
+#define EFUCTRL_LEN_MASK	0x1F
+#define EFUCTRL_LEN_SHIFT	16
+#define EFUCTRL_PG_EN		BIT(15)
+#define EFUCTRL_WR_EN		BIT(1)
+#define EFUCTRL_RD_EN		BIT(0)
+
+#define EFUCFG_INT_EN		BIT(31)
+#define EFUCFG_RD_ADJ_MASK	0xF
+#define EFUCFG_RD_ADJ_SHIFT	20
+#define EFUCFG_RD_STR_MASK	0xF
+#define EFUCFG_RD_STR_SHIFT	16
+#define EFUCFG_WR_ADJ_MASK	0xF
+#define EFUCFG_WR_ADJ_SHIFT	12
+#define EFUCFG_WR_STR_MASK	0xFFF
+#define EFUCFG_WR_STR_SHIFT	0
+
+#define EFUSTATE_WR_DONE	BIT(1)
+#define EFUSTATE_RD_DONE	BIT(0)
+
+struct jz4780_efuse {
+	struct device *dev;
+	struct regmap *map;
+	struct clk *clk;
+};
+
+/* main entry point */
+static int jz4780_efuse_read(void *context, unsigned int offset,
+			     void *val, size_t bytes)
+{
+	struct jz4780_efuse *efuse = context;
+
+	while (bytes > 0) {
+		size_t start = offset & ~(JZ_EFU_READ_SIZE - 1);
+		size_t chunk = min(bytes, (start + JZ_EFU_READ_SIZE)
+				    - offset);
+		char buf[JZ_EFU_READ_SIZE];
+		unsigned int tmp;
+		u32 ctrl;
+		int ret;
+
+		ctrl = (start << EFUCTRL_ADDR_SHIFT)
+			| ((JZ_EFU_READ_SIZE - 1) << EFUCTRL_LEN_SHIFT)
+			| EFUCTRL_RD_EN;
+
+		regmap_update_bits(efuse->map, JZ_EFUCTRL,
+				   (EFUCTRL_ADDR_MASK << EFUCTRL_ADDR_SHIFT) |
+				   (EFUCTRL_LEN_MASK << EFUCTRL_LEN_SHIFT) |
+				   EFUCTRL_PG_EN | EFUCTRL_WR_EN |
+				   EFUCTRL_RD_EN,
+				   ctrl);
+
+		ret = regmap_read_poll_timeout(efuse->map, JZ_EFUSTATE,
+					       tmp, tmp & EFUSTATE_RD_DONE,
+					       1 * MSEC_PER_SEC,
+					       50 * MSEC_PER_SEC);
+		if (ret < 0) {
+			dev_err(efuse->dev, "Time out while reading efuse data");
+			return ret;
+		}
+
+		ret = regmap_bulk_read(efuse->map, JZ_EFUDATA(0),
+				       buf, JZ_EFU_READ_SIZE / sizeof(u32));
+		if (ret < 0)
+			return ret;
+
+		memcpy(val, &buf[offset - start], chunk);
+
+		val += chunk;
+		offset += chunk;
+		bytes -= chunk;
+	}
+
+	return 0;
+}
+
+static struct nvmem_config jz4780_efuse_nvmem_config = {
+	.name = "jz4780-efuse",
+	.size = 1024,
+	.word_size = 1,
+	.stride = 1,
+	.owner = THIS_MODULE,
+	.reg_read = jz4780_efuse_read,
+};
+
+static const struct regmap_config jz4780_efuse_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = JZ_EFUDATA(7),
+};
+
+static void clk_disable_unprepare_helper(void *clock)
+{
+	clk_disable_unprepare(clock);
+}
+
+static int jz4780_efuse_probe(struct platform_device *pdev)
+{
+	struct nvmem_device *nvmem;
+	struct jz4780_efuse *efuse;
+	struct nvmem_config cfg;
+	unsigned long clk_rate;
+	unsigned long rd_adj;
+	unsigned long rd_strobe;
+	struct device *dev = &pdev->dev;
+	void __iomem *regs;
+	int ret;
+
+	efuse = devm_kzalloc(dev, sizeof(*efuse), GFP_KERNEL);
+	if (!efuse)
+		return -ENOMEM;
+
+	regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	efuse->map = devm_regmap_init_mmio(dev, regs,
+					   &jz4780_efuse_regmap_config);
+	if (IS_ERR(efuse->map))
+		return PTR_ERR(efuse->map);
+
+	efuse->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(efuse->clk))
+		return PTR_ERR(efuse->clk);
+
+	ret = clk_prepare_enable(efuse->clk);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_add_action_or_reset(&pdev->dev,
+				       clk_disable_unprepare_helper,
+				       efuse->clk);
+	if (ret < 0)
+		return ret;
+
+	clk_rate = clk_get_rate(efuse->clk);
+
+	efuse->dev = dev;
+
+	/*
+	 * rd_adj and rd_strobe are 4 bit values
+	 * conditions:
+	 *   bus clk_period * (rd_adj + 1) > 6.5ns
+	 *   bus clk_period * (rd_adj + 5 + rd_strobe) > 35ns
+	 *   i.e. rd_adj >= 6.5ns / clk_period
+	 *   i.e. rd_strobe >= 35 ns / clk_period - 5 - rd_adj + 1
+	 * constants:
+	 *   1 / 6.5ns == 153846154 Hz
+	 *   1 / 35ns == 28571429 Hz
+	 */
+
+	rd_adj = clk_rate / 153846154;
+	rd_strobe = clk_rate / 28571429 - 5 - rd_adj + 1;
+
+	if (rd_adj > EFUCFG_RD_ADJ_MASK ||
+	    rd_strobe > EFUCFG_RD_STR_MASK) {
+		dev_err(&pdev->dev, "Cannot set clock configuration\n");
+		return -EINVAL;
+	}
+
+	regmap_update_bits(efuse->map, JZ_EFUCFG,
+			   (EFUCFG_RD_ADJ_MASK << EFUCFG_RD_ADJ_SHIFT) |
+			   (EFUCFG_RD_STR_MASK << EFUCFG_RD_STR_SHIFT),
+			   (rd_adj << EFUCFG_RD_ADJ_SHIFT) |
+			   (rd_strobe << EFUCFG_RD_STR_SHIFT));
+
+	cfg = jz4780_efuse_nvmem_config;
+	cfg.dev = &pdev->dev;
+	cfg.priv = efuse;
+
+	nvmem = devm_nvmem_register(dev, &cfg);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id jz4780_efuse_match[] = {
+	{ .compatible = "ingenic,jz4780-efuse" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, jz4780_efuse_match);
+
+static struct platform_driver jz4780_efuse_driver = {
+	.probe  = jz4780_efuse_probe,
+	.driver = {
+		.name = "jz4780-efuse",
+		.of_match_table = jz4780_efuse_match,
+	},
+};
+module_platform_driver(jz4780_efuse_driver);
+
+MODULE_AUTHOR("PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>");
+MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_DESCRIPTION("Ingenic JZ4780 efuse driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/lan9662-otpc.c b/drivers/nvmem/lan9662-otpc.c
new file mode 100644
index 000000000..62d1d6381
--- /dev/null
+++ b/drivers/nvmem/lan9662-otpc.c
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define OTP_OTP_PWR_DN(t)			(t + 0x00)
+#define OTP_OTP_PWR_DN_OTP_PWRDN_N		BIT(0)
+#define OTP_OTP_ADDR_HI(t)			(t + 0x04)
+#define OTP_OTP_ADDR_LO(t)			(t + 0x08)
+#define OTP_OTP_PRGM_DATA(t)			(t + 0x10)
+#define OTP_OTP_PRGM_MODE(t)			(t + 0x14)
+#define OTP_OTP_PRGM_MODE_OTP_PGM_MODE_BYTE	BIT(0)
+#define OTP_OTP_RD_DATA(t)			(t + 0x18)
+#define OTP_OTP_FUNC_CMD(t)			(t + 0x20)
+#define OTP_OTP_FUNC_CMD_OTP_PROGRAM		BIT(1)
+#define OTP_OTP_FUNC_CMD_OTP_READ		BIT(0)
+#define OTP_OTP_CMD_GO(t)			(t + 0x28)
+#define OTP_OTP_CMD_GO_OTP_GO			BIT(0)
+#define OTP_OTP_PASS_FAIL(t)			(t + 0x2c)
+#define OTP_OTP_PASS_FAIL_OTP_READ_PROHIBITED	BIT(3)
+#define OTP_OTP_PASS_FAIL_OTP_WRITE_PROHIBITED	BIT(2)
+#define OTP_OTP_PASS_FAIL_OTP_FAIL		BIT(0)
+#define OTP_OTP_STATUS(t)			(t + 0x30)
+#define OTP_OTP_STATUS_OTP_CPUMPEN		BIT(1)
+#define OTP_OTP_STATUS_OTP_BUSY			BIT(0)
+
+#define OTP_SLEEP_US 10
+#define OTP_TIMEOUT_US 500000
+
+struct lan9662_otp {
+	struct device *dev;
+	void __iomem *base;
+};
+
+static int lan9662_otp_wait_flag_clear(void __iomem *reg, u32 flag)
+{
+	u32 val;
+
+	return readl_poll_timeout(reg, val, !(val & flag),
+				  OTP_SLEEP_US, OTP_TIMEOUT_US);
+}
+
+static int lan9662_otp_power(struct lan9662_otp *otp, bool up)
+{
+	void __iomem *pwrdn = OTP_OTP_PWR_DN(otp->base);
+
+	if (up) {
+		writel(readl(pwrdn) & ~OTP_OTP_PWR_DN_OTP_PWRDN_N, pwrdn);
+		if (lan9662_otp_wait_flag_clear(OTP_OTP_STATUS(otp->base),
+						OTP_OTP_STATUS_OTP_CPUMPEN))
+			return -ETIMEDOUT;
+	} else {
+		writel(readl(pwrdn) | OTP_OTP_PWR_DN_OTP_PWRDN_N, pwrdn);
+	}
+
+	return 0;
+}
+
+static int lan9662_otp_execute(struct lan9662_otp *otp)
+{
+	if (lan9662_otp_wait_flag_clear(OTP_OTP_CMD_GO(otp->base),
+					OTP_OTP_CMD_GO_OTP_GO))
+		return -ETIMEDOUT;
+
+	if (lan9662_otp_wait_flag_clear(OTP_OTP_STATUS(otp->base),
+					OTP_OTP_STATUS_OTP_BUSY))
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static void lan9662_otp_set_address(struct lan9662_otp *otp, u32 offset)
+{
+	writel(0xff & (offset >> 8), OTP_OTP_ADDR_HI(otp->base));
+	writel(0xff & offset, OTP_OTP_ADDR_LO(otp->base));
+}
+
+static int lan9662_otp_read_byte(struct lan9662_otp *otp, u32 offset, u8 *dst)
+{
+	u32 pass;
+	int rc;
+
+	lan9662_otp_set_address(otp, offset);
+	writel(OTP_OTP_FUNC_CMD_OTP_READ, OTP_OTP_FUNC_CMD(otp->base));
+	writel(OTP_OTP_CMD_GO_OTP_GO, OTP_OTP_CMD_GO(otp->base));
+	rc = lan9662_otp_execute(otp);
+	if (!rc) {
+		pass = readl(OTP_OTP_PASS_FAIL(otp->base));
+		if (pass & OTP_OTP_PASS_FAIL_OTP_READ_PROHIBITED)
+			return -EACCES;
+		*dst = (u8) readl(OTP_OTP_RD_DATA(otp->base));
+	}
+	return rc;
+}
+
+static int lan9662_otp_write_byte(struct lan9662_otp *otp, u32 offset, u8 data)
+{
+	u32 pass;
+	int rc;
+
+	lan9662_otp_set_address(otp, offset);
+	writel(OTP_OTP_PRGM_MODE_OTP_PGM_MODE_BYTE, OTP_OTP_PRGM_MODE(otp->base));
+	writel(data, OTP_OTP_PRGM_DATA(otp->base));
+	writel(OTP_OTP_FUNC_CMD_OTP_PROGRAM, OTP_OTP_FUNC_CMD(otp->base));
+	writel(OTP_OTP_CMD_GO_OTP_GO, OTP_OTP_CMD_GO(otp->base));
+
+	rc = lan9662_otp_execute(otp);
+	if (!rc) {
+		pass = readl(OTP_OTP_PASS_FAIL(otp->base));
+		if (pass & OTP_OTP_PASS_FAIL_OTP_WRITE_PROHIBITED)
+			return -EACCES;
+		if (pass & OTP_OTP_PASS_FAIL_OTP_FAIL)
+			return -EIO;
+	}
+	return rc;
+}
+
+static int lan9662_otp_read(void *context, unsigned int offset,
+			    void *_val, size_t bytes)
+{
+	struct lan9662_otp *otp = context;
+	u8 *val = _val;
+	uint8_t data;
+	int i, rc = 0;
+
+	lan9662_otp_power(otp, true);
+	for (i = 0; i < bytes; i++) {
+		rc = lan9662_otp_read_byte(otp, offset + i, &data);
+		if (rc < 0)
+			break;
+		*val++ = data;
+	}
+	lan9662_otp_power(otp, false);
+
+	return rc;
+}
+
+static int lan9662_otp_write(void *context, unsigned int offset,
+			     void *_val, size_t bytes)
+{
+	struct lan9662_otp *otp = context;
+	u8 *val = _val;
+	u8 data, newdata;
+	int i, rc = 0;
+
+	lan9662_otp_power(otp, true);
+	for (i = 0; i < bytes; i++) {
+		/* Skip zero bytes */
+		if (val[i]) {
+			rc = lan9662_otp_read_byte(otp, offset + i, &data);
+			if (rc < 0)
+				break;
+
+			newdata = data | val[i];
+			if (newdata == data)
+				continue;
+
+			rc = lan9662_otp_write_byte(otp, offset + i,
+						      newdata);
+			if (rc < 0)
+				break;
+		}
+	}
+	lan9662_otp_power(otp, false);
+
+	return rc;
+}
+
+static struct nvmem_config otp_config = {
+	.name = "lan9662-otp",
+	.stride = 1,
+	.word_size = 1,
+	.reg_read = lan9662_otp_read,
+	.reg_write = lan9662_otp_write,
+};
+
+static int lan9662_otp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct nvmem_device *nvmem;
+	struct lan9662_otp *otp;
+
+	otp = devm_kzalloc(&pdev->dev, sizeof(*otp), GFP_KERNEL);
+	if (!otp)
+		return -ENOMEM;
+
+	otp->dev = dev;
+	otp->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(otp->base))
+		return PTR_ERR(otp->base);
+
+	otp_config.priv = otp;
+	otp_config.dev = dev;
+	otp_config.size = (uintptr_t) device_get_match_data(dev);
+
+	nvmem = devm_nvmem_register(dev, &otp_config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id lan9662_otp_match[] = {
+	{
+		.compatible = "microchip,lan9662-otpc",
+		.data = (const void *) SZ_8K,
+	},
+	{
+		.compatible = "microchip,lan9691-otpc",
+		.data = (const void *) SZ_16K,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lan9662_otp_match);
+
+static struct platform_driver lan9662_otp_driver = {
+	.probe = lan9662_otp_probe,
+	.driver = {
+		.name = "lan9662-otp",
+		.of_match_table = lan9662_otp_match,
+	},
+};
+module_platform_driver(lan9662_otp_driver);
+
+MODULE_AUTHOR("Horatiu Vultur <horatiu.vultur@microchip.com>");
+MODULE_DESCRIPTION("lan9662 OTP driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/layerscape-sfp.c b/drivers/nvmem/layerscape-sfp.c
new file mode 100644
index 000000000..c1521afd5
--- /dev/null
+++ b/drivers/nvmem/layerscape-sfp.c
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Layerscape SFP driver
+ *
+ * Copyright (c) 2022 Michael Walle <michael@walle.cc>
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#define LAYERSCAPE_SFP_OTP_OFFSET	0x0200
+
+struct layerscape_sfp_priv {
+	struct regmap *regmap;
+};
+
+struct layerscape_sfp_data {
+	int size;
+	enum regmap_endian endian;
+};
+
+static int layerscape_sfp_read(void *context, unsigned int offset, void *val,
+			       size_t bytes)
+{
+	struct layerscape_sfp_priv *priv = context;
+
+	return regmap_bulk_read(priv->regmap,
+				LAYERSCAPE_SFP_OTP_OFFSET + offset, val,
+				bytes / 4);
+}
+
+static struct nvmem_config layerscape_sfp_nvmem_config = {
+	.name = "fsl-sfp",
+	.reg_read = layerscape_sfp_read,
+	.word_size = 4,
+	.stride = 4,
+};
+
+static int layerscape_sfp_probe(struct platform_device *pdev)
+{
+	const struct layerscape_sfp_data *data;
+	struct layerscape_sfp_priv *priv;
+	struct nvmem_device *nvmem;
+	struct regmap_config config = { 0 };
+	void __iomem *base;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	data = device_get_match_data(&pdev->dev);
+	config.reg_bits = 32;
+	config.reg_stride = 4;
+	config.val_bits = 32;
+	config.val_format_endian = data->endian;
+	config.max_register = LAYERSCAPE_SFP_OTP_OFFSET + data->size - 4;
+	priv->regmap = devm_regmap_init_mmio(&pdev->dev, base, &config);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	layerscape_sfp_nvmem_config.size = data->size;
+	layerscape_sfp_nvmem_config.dev = &pdev->dev;
+	layerscape_sfp_nvmem_config.priv = priv;
+
+	nvmem = devm_nvmem_register(&pdev->dev, &layerscape_sfp_nvmem_config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct layerscape_sfp_data ls1021a_data = {
+	.size = 0x88,
+	.endian = REGMAP_ENDIAN_BIG,
+};
+
+static const struct layerscape_sfp_data ls1028a_data = {
+	.size = 0x88,
+	.endian = REGMAP_ENDIAN_LITTLE,
+};
+
+static const struct of_device_id layerscape_sfp_dt_ids[] = {
+	{ .compatible = "fsl,ls1021a-sfp", .data = &ls1021a_data },
+	{ .compatible = "fsl,ls1028a-sfp", .data = &ls1028a_data },
+	{},
+};
+MODULE_DEVICE_TABLE(of, layerscape_sfp_dt_ids);
+
+static struct platform_driver layerscape_sfp_driver = {
+	.probe	= layerscape_sfp_probe,
+	.driver = {
+		.name	= "layerscape_sfp",
+		.of_match_table = layerscape_sfp_dt_ids,
+	},
+};
+module_platform_driver(layerscape_sfp_driver);
+
+MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
+MODULE_DESCRIPTION("Layerscape Security Fuse Processor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/layouts.c b/drivers/nvmem/layouts.c
new file mode 100644
index 000000000..07a34be96
--- /dev/null
+++ b/drivers/nvmem/layouts.c
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * NVMEM layout bus handling
+ *
+ * Copyright (C) 2023 Bootlin
+ * Author: Miquel Raynal <miquel.raynal@bootlin.com
+ */
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+
+#include "internals.h"
+
+#define to_nvmem_layout_driver(drv) \
+	(container_of_const((drv), struct nvmem_layout_driver, driver))
+#define to_nvmem_layout_device(_dev) \
+	container_of((_dev), struct nvmem_layout, dev)
+
+static int nvmem_layout_bus_match(struct device *dev, const struct device_driver *drv)
+{
+	return of_driver_match_device(dev, drv);
+}
+
+static int nvmem_layout_bus_probe(struct device *dev)
+{
+	struct nvmem_layout_driver *drv = to_nvmem_layout_driver(dev->driver);
+	struct nvmem_layout *layout = to_nvmem_layout_device(dev);
+
+	if (!drv->probe || !drv->remove)
+		return -EINVAL;
+
+	return drv->probe(layout);
+}
+
+static void nvmem_layout_bus_remove(struct device *dev)
+{
+	struct nvmem_layout_driver *drv = to_nvmem_layout_driver(dev->driver);
+	struct nvmem_layout *layout = to_nvmem_layout_device(dev);
+
+	return drv->remove(layout);
+}
+
+static int nvmem_layout_bus_uevent(const struct device *dev,
+				   struct kobj_uevent_env *env)
+{
+	int ret;
+
+	ret = of_device_uevent_modalias(dev, env);
+	if (ret != -ENODEV)
+		return ret;
+
+	return 0;
+}
+
+static const struct bus_type nvmem_layout_bus_type = {
+	.name		= "nvmem-layout",
+	.match		= nvmem_layout_bus_match,
+	.probe		= nvmem_layout_bus_probe,
+	.remove		= nvmem_layout_bus_remove,
+	.uevent		= nvmem_layout_bus_uevent,
+};
+
+int __nvmem_layout_driver_register(struct nvmem_layout_driver *drv,
+				   struct module *owner)
+{
+	drv->driver.bus = &nvmem_layout_bus_type;
+	drv->driver.owner = owner;
+
+	return driver_register(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(__nvmem_layout_driver_register);
+
+void nvmem_layout_driver_unregister(struct nvmem_layout_driver *drv)
+{
+	driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(nvmem_layout_driver_unregister);
+
+static void nvmem_layout_release_device(struct device *dev)
+{
+	struct nvmem_layout *layout = to_nvmem_layout_device(dev);
+
+	of_node_put(layout->dev.of_node);
+	kfree(layout);
+}
+
+static int nvmem_layout_create_device(struct nvmem_device *nvmem,
+				      struct device_node *np)
+{
+	struct nvmem_layout *layout;
+	struct device *dev;
+	int ret;
+
+	layout = kzalloc_obj(*layout);
+	if (!layout)
+		return -ENOMEM;
+
+	/* Create a bidirectional link */
+	layout->nvmem = nvmem;
+	nvmem->layout = layout;
+
+	/* Device model registration */
+	dev = &layout->dev;
+	device_initialize(dev);
+	dev->parent = &nvmem->dev;
+	dev->bus = &nvmem_layout_bus_type;
+	dev->release = nvmem_layout_release_device;
+	dev->coherent_dma_mask = DMA_BIT_MASK(32);
+	dev->dma_mask = &dev->coherent_dma_mask;
+	device_set_node(dev, of_fwnode_handle(of_node_get(np)));
+	of_device_make_bus_id(dev);
+	of_msi_configure(dev, dev->of_node);
+
+	ret = device_add(dev);
+	if (ret) {
+		put_device(dev);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int nvmem_layout_bus_populate(struct nvmem_device *nvmem,
+				     struct device_node *layout_dn)
+{
+	int ret;
+
+	/* Make sure it has a compatible property */
+	if (!of_property_present(layout_dn, "compatible")) {
+		pr_debug("%s() - skipping %pOF, no compatible prop\n",
+			 __func__, layout_dn);
+		return 0;
+	}
+
+	if (of_node_check_flag(layout_dn, OF_POPULATED_BUS)) {
+		pr_debug("%s() - skipping %pOF, already populated\n",
+			 __func__, layout_dn);
+
+		return 0;
+	}
+
+	/* NVMEM layout buses expect only a single device representing the layout */
+	ret = nvmem_layout_create_device(nvmem, layout_dn);
+	if (ret)
+		return ret;
+
+	of_node_set_flag(layout_dn, OF_POPULATED_BUS);
+
+	return 0;
+}
+
+struct device_node *of_nvmem_layout_get_container(struct nvmem_device *nvmem)
+{
+	return of_get_child_by_name(nvmem->dev.of_node, "nvmem-layout");
+}
+EXPORT_SYMBOL_GPL(of_nvmem_layout_get_container);
+
+/*
+ * Returns the number of devices populated, 0 if the operation was not relevant
+ * for this nvmem device, an error code otherwise.
+ */
+int nvmem_populate_layout(struct nvmem_device *nvmem)
+{
+	struct device_node *layout_dn;
+	int ret;
+
+	layout_dn = of_nvmem_layout_get_container(nvmem);
+	if (!layout_dn)
+		return 0;
+
+	/* Populate the layout device */
+	device_links_supplier_sync_state_pause();
+	ret = nvmem_layout_bus_populate(nvmem, layout_dn);
+	device_links_supplier_sync_state_resume();
+
+	of_node_put(layout_dn);
+	return ret;
+}
+
+void nvmem_destroy_layout(struct nvmem_device *nvmem)
+{
+	struct device *dev;
+
+	if (!nvmem->layout)
+		return;
+
+	dev = &nvmem->layout->dev;
+	of_node_clear_flag(dev->of_node, OF_POPULATED_BUS);
+	device_unregister(dev);
+}
+
+int nvmem_layout_bus_register(void)
+{
+	return bus_register(&nvmem_layout_bus_type);
+}
+
+void nvmem_layout_bus_unregister(void)
+{
+	bus_unregister(&nvmem_layout_bus_type);
+}
diff --git a/drivers/nvmem/layouts/Kconfig b/drivers/nvmem/layouts/Kconfig
new file mode 100644
index 000000000..5e586dfeb
--- /dev/null
+++ b/drivers/nvmem/layouts/Kconfig
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config NVMEM_LAYOUTS
+	bool
+	depends on OF
+
+if NVMEM_LAYOUTS
+
+menu "Layout Types"
+
+config NVMEM_LAYOUT_SL28_VPD
+	tristate "Kontron sl28 VPD layout support"
+	select CRC8
+	help
+	  Say Y here if you want to support the VPD layout of the Kontron
+	  SMARC-sAL28 boards.
+
+	  If unsure, say N.
+
+config NVMEM_LAYOUT_ONIE_TLV
+	tristate "ONIE tlv support"
+	select CRC32
+	help
+	  Say Y here if you want to support the Open Compute Project ONIE
+	  Type-Length-Value standard table.
+
+	  If unsure, say N.
+
+config NVMEM_LAYOUT_U_BOOT_ENV
+	tristate "U-Boot environment variables layout"
+	select CRC32
+	select GENERIC_NET_UTILS
+	help
+	  U-Boot stores its setup as environment variables. This driver adds
+	  support for verifying & exporting such data. It also exposes variables
+	  as NVMEM cells so they can be referenced by other drivers.
+
+	  If unsure, say N.
+
+endmenu
+
+endif
diff --git a/drivers/nvmem/layouts/Makefile b/drivers/nvmem/layouts/Makefile
new file mode 100644
index 000000000..dd6c6c70b
--- /dev/null
+++ b/drivers/nvmem/layouts/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for nvmem layouts.
+#
+
+obj-$(CONFIG_NVMEM_LAYOUTS) += fixed-layout.o
+obj-$(CONFIG_NVMEM_LAYOUT_SL28_VPD) += sl28vpd.o
+obj-$(CONFIG_NVMEM_LAYOUT_ONIE_TLV) += onie-tlv.o
+obj-$(CONFIG_NVMEM_LAYOUT_U_BOOT_ENV) += u-boot-env.o
diff --git a/drivers/nvmem/layouts/fixed-layout.c b/drivers/nvmem/layouts/fixed-layout.c
new file mode 100644
index 000000000..635d448b3
--- /dev/null
+++ b/drivers/nvmem/layouts/fixed-layout.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2026 Bootlin
+ *
+ * Authors: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
+ */
+
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+
+#include "../internals.h"
+
+static int fixed_layout_add_cells(struct nvmem_layout *layout)
+{
+	struct device_node *np;
+	int ret;
+
+	np = of_nvmem_layout_get_container(layout->nvmem);
+	if (!np)
+		return -ENOENT;
+
+	ret = nvmem_add_cells_from_dt(layout->nvmem, np);
+	of_node_put(np);
+
+	return ret;
+}
+
+static int fixed_layout_probe(struct nvmem_layout *layout)
+{
+	layout->add_cells = fixed_layout_add_cells;
+
+	return nvmem_layout_register(layout);
+}
+
+static void fixed_layout_remove(struct nvmem_layout *layout)
+{
+	nvmem_layout_unregister(layout);
+}
+
+static const struct of_device_id fixed_layout_of_match_table[] = {
+	{ .compatible = "fixed-layout", },
+	{},
+};
+
+static struct nvmem_layout_driver fixed_layout_layout = {
+	.driver = {
+		.name = "fixed-layout",
+		.of_match_table = fixed_layout_of_match_table,
+	},
+	.probe = fixed_layout_probe,
+	.remove = fixed_layout_remove,
+};
+module_nvmem_layout_driver(fixed_layout_layout);
+
+MODULE_AUTHOR("Mathieu Dubois-Briand");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, fixed_layout_of_match_table);
+MODULE_DESCRIPTION("NVMEM fixed-layout driver");
diff --git a/drivers/nvmem/layouts/onie-tlv.c b/drivers/nvmem/layouts/onie-tlv.c
new file mode 100644
index 000000000..8b0f3c1b8
--- /dev/null
+++ b/drivers/nvmem/layouts/onie-tlv.c
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ONIE tlv NVMEM cells provider
+ *
+ * Copyright (C) 2022 Open Compute Group ONIE
+ * Author: Miquel Raynal <miquel.raynal@bootlin.com>
+ * Based on the nvmem driver written by: Vadym Kochan <vadym.kochan@plvision.eu>
+ * Inspired by the first layout written by: Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <linux/crc32.h>
+#include <linux/etherdevice.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+
+#define ONIE_TLV_MAX_LEN 2048
+#define ONIE_TLV_CRC_FIELD_SZ 6
+#define ONIE_TLV_CRC_SZ 4
+#define ONIE_TLV_HDR_ID	"TlvInfo"
+
+struct onie_tlv_hdr {
+	u8 id[8];
+	u8 version;
+	__be16 data_len;
+} __packed;
+
+struct onie_tlv {
+	u8 type;
+	u8 len;
+} __packed;
+
+static const char *onie_tlv_cell_name(u8 type)
+{
+	switch (type) {
+	case 0x21:
+		return "product-name";
+	case 0x22:
+		return "part-number";
+	case 0x23:
+		return "serial-number";
+	case 0x24:
+		return "mac-address";
+	case 0x25:
+		return "manufacture-date";
+	case 0x26:
+		return "device-version";
+	case 0x27:
+		return "label-revision";
+	case 0x28:
+		return "platform-name";
+	case 0x29:
+		return "onie-version";
+	case 0x2A:
+		return "num-macs";
+	case 0x2B:
+		return "manufacturer";
+	case 0x2C:
+		return "country-code";
+	case 0x2D:
+		return "vendor";
+	case 0x2E:
+		return "diag-version";
+	case 0x2F:
+		return "service-tag";
+	case 0xFD:
+		return "vendor-extension";
+	case 0xFE:
+		return "crc32";
+	default:
+		break;
+	}
+
+	return NULL;
+}
+
+static int onie_tlv_mac_read_cb(void *priv, const char *id, int index,
+				unsigned int offset, void *buf,
+				size_t bytes)
+{
+	eth_addr_add(buf, index);
+
+	return 0;
+}
+
+static nvmem_cell_post_process_t onie_tlv_read_cb(u8 type, u8 *buf)
+{
+	switch (type) {
+	case 0x24:
+		return &onie_tlv_mac_read_cb;
+	default:
+		break;
+	}
+
+	return NULL;
+}
+
+static int onie_tlv_add_cells(struct device *dev, struct nvmem_device *nvmem,
+			      size_t data_len, u8 *data)
+{
+	struct nvmem_cell_info cell = {};
+	struct device_node *layout;
+	struct onie_tlv tlv;
+	unsigned int hdr_len = sizeof(struct onie_tlv_hdr);
+	unsigned int offset = 0;
+	int ret;
+
+	layout = of_nvmem_layout_get_container(nvmem);
+	if (!layout)
+		return -ENOENT;
+
+	while (offset < data_len) {
+		memcpy(&tlv, data + offset, sizeof(tlv));
+		if (offset + tlv.len >= data_len) {
+			dev_err(dev, "Out of bounds field (0x%x bytes at 0x%x)\n",
+				tlv.len, hdr_len + offset);
+			break;
+		}
+
+		cell.name = onie_tlv_cell_name(tlv.type);
+		if (!cell.name)
+			goto next;
+
+		cell.offset = hdr_len + offset + sizeof(tlv.type) + sizeof(tlv.len);
+		cell.bytes = tlv.len;
+		cell.np = of_get_child_by_name(layout, cell.name);
+		cell.read_post_process = onie_tlv_read_cb(tlv.type, data + offset + sizeof(tlv));
+
+		ret = nvmem_add_one_cell(nvmem, &cell);
+		if (ret) {
+			of_node_put(layout);
+			return ret;
+		}
+
+next:
+		offset += sizeof(tlv) + tlv.len;
+	}
+
+	of_node_put(layout);
+
+	return 0;
+}
+
+static bool onie_tlv_hdr_is_valid(struct device *dev, struct onie_tlv_hdr *hdr)
+{
+	if (memcmp(hdr->id, ONIE_TLV_HDR_ID, sizeof(hdr->id))) {
+		dev_err(dev, "Invalid header\n");
+		return false;
+	}
+
+	if (hdr->version != 0x1) {
+		dev_err(dev, "Invalid version number\n");
+		return false;
+	}
+
+	return true;
+}
+
+static bool onie_tlv_crc_is_valid(struct device *dev, size_t table_len, u8 *table)
+{
+	struct onie_tlv crc_hdr;
+	u32 read_crc, calc_crc;
+	__be32 crc_be;
+
+	memcpy(&crc_hdr, table + table_len - ONIE_TLV_CRC_FIELD_SZ, sizeof(crc_hdr));
+	if (crc_hdr.type != 0xfe || crc_hdr.len != ONIE_TLV_CRC_SZ) {
+		dev_err(dev, "Invalid CRC field\n");
+		return false;
+	}
+
+	/* The table contains a JAMCRC, which is XOR'ed compared to the original
+	 * CRC32 implementation as known in the Ethernet world.
+	 */
+	memcpy(&crc_be, table + table_len - ONIE_TLV_CRC_SZ, ONIE_TLV_CRC_SZ);
+	read_crc = be32_to_cpu(crc_be);
+	calc_crc = crc32(~0, table, table_len - ONIE_TLV_CRC_SZ) ^ 0xFFFFFFFF;
+	if (read_crc != calc_crc) {
+		dev_err(dev, "Invalid CRC read: 0x%08x, expected: 0x%08x\n",
+			read_crc, calc_crc);
+		return false;
+	}
+
+	return true;
+}
+
+static int onie_tlv_parse_table(struct nvmem_layout *layout)
+{
+	struct nvmem_device *nvmem = layout->nvmem;
+	struct device *dev = &layout->dev;
+	struct onie_tlv_hdr hdr;
+	size_t table_len, data_len, hdr_len;
+	u8 *table, *data;
+	int ret;
+
+	ret = nvmem_device_read(nvmem, 0, sizeof(hdr), &hdr);
+	if (ret < 0)
+		return ret;
+
+	if (!onie_tlv_hdr_is_valid(dev, &hdr)) {
+		dev_err(dev, "Invalid ONIE TLV header\n");
+		return -EINVAL;
+	}
+
+	hdr_len = sizeof(hdr.id) + sizeof(hdr.version) + sizeof(hdr.data_len);
+	data_len = be16_to_cpu(hdr.data_len);
+	table_len = hdr_len + data_len;
+	if (table_len > ONIE_TLV_MAX_LEN) {
+		dev_err(dev, "Invalid ONIE TLV data length\n");
+		return -EINVAL;
+	}
+
+	table = devm_kmalloc(dev, table_len, GFP_KERNEL);
+	if (!table)
+		return -ENOMEM;
+
+	ret = nvmem_device_read(nvmem, 0, table_len, table);
+	if (ret != table_len)
+		return ret;
+
+	if (!onie_tlv_crc_is_valid(dev, table_len, table))
+		return -EINVAL;
+
+	data = table + hdr_len;
+	ret = onie_tlv_add_cells(dev, nvmem, data_len, data);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int onie_tlv_probe(struct nvmem_layout *layout)
+{
+	layout->add_cells = onie_tlv_parse_table;
+
+	return nvmem_layout_register(layout);
+}
+
+static void onie_tlv_remove(struct nvmem_layout *layout)
+{
+	nvmem_layout_unregister(layout);
+}
+
+static const struct of_device_id onie_tlv_of_match_table[] = {
+	{ .compatible = "onie,tlv-layout", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, onie_tlv_of_match_table);
+
+static struct nvmem_layout_driver onie_tlv_layout = {
+	.driver = {
+		.name = "onie-tlv-layout",
+		.of_match_table = onie_tlv_of_match_table,
+	},
+	.probe = onie_tlv_probe,
+	.remove = onie_tlv_remove,
+};
+module_nvmem_layout_driver(onie_tlv_layout);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>");
+MODULE_DESCRIPTION("NVMEM layout driver for Onie TLV table parsing");
diff --git a/drivers/nvmem/layouts/sl28vpd.c b/drivers/nvmem/layouts/sl28vpd.c
new file mode 100644
index 000000000..e93b020b0
--- /dev/null
+++ b/drivers/nvmem/layouts/sl28vpd.c
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/crc8.h>
+#include <linux/etherdevice.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <uapi/linux/if_ether.h>
+
+#define SL28VPD_MAGIC 'V'
+
+struct sl28vpd_header {
+	u8 magic;
+	u8 version;
+} __packed;
+
+struct sl28vpd_v1 {
+	struct sl28vpd_header header;
+	char serial_number[15];
+	u8 base_mac_address[ETH_ALEN];
+	u8 crc8;
+} __packed;
+
+static int sl28vpd_mac_address_pp(void *priv, const char *id, int index,
+				  unsigned int offset, void *buf,
+				  size_t bytes)
+{
+	if (bytes != ETH_ALEN)
+		return -EINVAL;
+
+	if (index < 0)
+		return -EINVAL;
+
+	if (!is_valid_ether_addr(buf))
+		return -EINVAL;
+
+	eth_addr_add(buf, index);
+
+	return 0;
+}
+
+static const struct nvmem_cell_info sl28vpd_v1_entries[] = {
+	{
+		.name = "serial-number",
+		.offset = offsetof(struct sl28vpd_v1, serial_number),
+		.bytes = sizeof_field(struct sl28vpd_v1, serial_number),
+	},
+	{
+		.name = "base-mac-address",
+		.offset = offsetof(struct sl28vpd_v1, base_mac_address),
+		.bytes = sizeof_field(struct sl28vpd_v1, base_mac_address),
+		.read_post_process = sl28vpd_mac_address_pp,
+	},
+};
+
+static int sl28vpd_v1_check_crc(struct device *dev, struct nvmem_device *nvmem)
+{
+	struct sl28vpd_v1 data_v1;
+	u8 table[CRC8_TABLE_SIZE];
+	int ret;
+	u8 crc;
+
+	crc8_populate_msb(table, 0x07);
+
+	ret = nvmem_device_read(nvmem, 0, sizeof(data_v1), &data_v1);
+	if (ret < 0)
+		return ret;
+	else if (ret != sizeof(data_v1))
+		return -EIO;
+
+	crc = crc8(table, (void *)&data_v1, sizeof(data_v1) - 1, 0);
+
+	if (crc != data_v1.crc8) {
+		dev_err(dev,
+			"Checksum is invalid (got %02x, expected %02x).\n",
+			crc, data_v1.crc8);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int sl28vpd_add_cells(struct nvmem_layout *layout)
+{
+	struct nvmem_device *nvmem = layout->nvmem;
+	struct device *dev = &layout->dev;
+	const struct nvmem_cell_info *pinfo;
+	struct nvmem_cell_info info = {0};
+	struct device_node *layout_np;
+	struct sl28vpd_header hdr;
+	int ret, i;
+
+	/* check header */
+	ret = nvmem_device_read(nvmem, 0, sizeof(hdr), &hdr);
+	if (ret < 0)
+		return ret;
+	else if (ret != sizeof(hdr))
+		return -EIO;
+
+	if (hdr.magic != SL28VPD_MAGIC) {
+		dev_err(dev, "Invalid magic value (%02x)\n", hdr.magic);
+		return -EINVAL;
+	}
+
+	if (hdr.version != 1) {
+		dev_err(dev, "Version %d is unsupported.\n", hdr.version);
+		return -EINVAL;
+	}
+
+	ret = sl28vpd_v1_check_crc(dev, nvmem);
+	if (ret)
+		return ret;
+
+	layout_np = of_nvmem_layout_get_container(nvmem);
+	if (!layout_np)
+		return -ENOENT;
+
+	for (i = 0; i < ARRAY_SIZE(sl28vpd_v1_entries); i++) {
+		pinfo = &sl28vpd_v1_entries[i];
+
+		info.name = pinfo->name;
+		info.offset = pinfo->offset;
+		info.bytes = pinfo->bytes;
+		info.read_post_process = pinfo->read_post_process;
+		info.np = of_get_child_by_name(layout_np, pinfo->name);
+
+		ret = nvmem_add_one_cell(nvmem, &info);
+		if (ret) {
+			of_node_put(layout_np);
+			return ret;
+		}
+	}
+
+	of_node_put(layout_np);
+
+	return 0;
+}
+
+static int sl28vpd_probe(struct nvmem_layout *layout)
+{
+	layout->add_cells = sl28vpd_add_cells;
+
+	return nvmem_layout_register(layout);
+}
+
+static void sl28vpd_remove(struct nvmem_layout *layout)
+{
+	nvmem_layout_unregister(layout);
+}
+
+static const struct of_device_id sl28vpd_of_match_table[] = {
+	{ .compatible = "kontron,sl28-vpd" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sl28vpd_of_match_table);
+
+static struct nvmem_layout_driver sl28vpd_layout = {
+	.driver = {
+		.name = "kontron-sl28vpd-layout",
+		.of_match_table = sl28vpd_of_match_table,
+	},
+	.probe = sl28vpd_probe,
+	.remove = sl28vpd_remove,
+};
+module_nvmem_layout_driver(sl28vpd_layout);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
+MODULE_DESCRIPTION("NVMEM layout driver for the VPD of Kontron sl28 boards");
diff --git a/drivers/nvmem/layouts/u-boot-env.c b/drivers/nvmem/layouts/u-boot-env.c
new file mode 100644
index 000000000..33ec23503
--- /dev/null
+++ b/drivers/nvmem/layouts/u-boot-env.c
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 - 2023 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <linux/crc32.h>
+#include <linux/etherdevice.h>
+#include <linux/export.h>
+#include <linux/hex.h>
+#include <linux/if_ether.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+
+#include "u-boot-env.h"
+
+struct u_boot_env_image_single {
+	__le32 crc32;
+	uint8_t data[];
+} __packed;
+
+struct u_boot_env_image_redundant {
+	__le32 crc32;
+	u8 mark;
+	uint8_t data[];
+} __packed;
+
+struct u_boot_env_image_broadcom {
+	__le32 magic;
+	__le32 len;
+	__le32 crc32;
+	DECLARE_FLEX_ARRAY(uint8_t, data);
+} __packed;
+
+static int u_boot_env_read_post_process_ethaddr(void *context, const char *id, int index,
+						unsigned int offset, void *buf, size_t bytes)
+{
+	u8 mac[ETH_ALEN];
+
+	if (!mac_pton(buf, mac))
+		return -EINVAL;
+
+	if (index)
+		eth_addr_add(mac, index);
+
+	ether_addr_copy(buf, mac);
+
+	return 0;
+}
+
+static int u_boot_env_parse_cells(struct device *dev, struct nvmem_device *nvmem, uint8_t *buf,
+				  size_t data_offset, size_t data_len)
+{
+	char *data = buf + data_offset;
+	char *var, *value, *eq;
+
+	for (var = data;
+	     var < data + data_len && *var;
+	     var = value + strlen(value) + 1) {
+		struct nvmem_cell_info info = {};
+
+		eq = strchr(var, '=');
+		if (!eq)
+			break;
+		*eq = '\0';
+		value = eq + 1;
+
+		info.name = devm_kstrdup(dev, var, GFP_KERNEL);
+		if (!info.name)
+			return -ENOMEM;
+		info.offset = data_offset + value - data;
+		info.bytes = strlen(value);
+		info.np = of_get_child_by_name(dev->of_node, info.name);
+		if (!strcmp(var, "ethaddr") && info.bytes == MAC_ADDR_STR_LEN) {
+			info.raw_len = strlen(value);
+			info.bytes = ETH_ALEN;
+			info.read_post_process = u_boot_env_read_post_process_ethaddr;
+		}
+
+		nvmem_add_one_cell(nvmem, &info);
+	}
+
+	return 0;
+}
+
+int u_boot_env_parse(struct device *dev, struct nvmem_device *nvmem,
+		     enum u_boot_env_format format)
+{
+	size_t crc32_data_offset;
+	size_t crc32_data_len;
+	size_t crc32_offset;
+	uint32_t *crc32_addr;
+	size_t data_offset;
+	size_t data_len;
+	size_t dev_size;
+	uint32_t crc32;
+	uint32_t calc;
+	uint8_t *buf;
+	u32 env_size;
+	int bytes;
+	int err;
+
+	dev_size = device_property_read_u32(dev, "env-size", &env_size) ?
+		nvmem_dev_size(nvmem) : (size_t)env_size;
+
+	buf = kzalloc(dev_size, GFP_KERNEL);
+	if (!buf) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	bytes = nvmem_device_read(nvmem, 0, dev_size, buf);
+	if (bytes < 0) {
+		err = bytes;
+		goto err_kfree;
+	} else if (bytes != dev_size) {
+		err = -EIO;
+		goto err_kfree;
+	}
+
+	switch (format) {
+	case U_BOOT_FORMAT_SINGLE:
+		crc32_offset = offsetof(struct u_boot_env_image_single, crc32);
+		crc32_data_offset = offsetof(struct u_boot_env_image_single, data);
+		data_offset = offsetof(struct u_boot_env_image_single, data);
+		break;
+	case U_BOOT_FORMAT_REDUNDANT:
+		crc32_offset = offsetof(struct u_boot_env_image_redundant, crc32);
+		crc32_data_offset = offsetof(struct u_boot_env_image_redundant, data);
+		data_offset = offsetof(struct u_boot_env_image_redundant, data);
+		break;
+	case U_BOOT_FORMAT_BROADCOM:
+		crc32_offset = offsetof(struct u_boot_env_image_broadcom, crc32);
+		crc32_data_offset = offsetof(struct u_boot_env_image_broadcom, data);
+		data_offset = offsetof(struct u_boot_env_image_broadcom, data);
+		break;
+	}
+
+	if (dev_size < data_offset) {
+		dev_err(dev, "Device too small for u-boot-env\n");
+		err = -EIO;
+		goto err_kfree;
+	}
+
+	crc32_addr = (uint32_t *)(buf + crc32_offset);
+	crc32 = *crc32_addr;
+	crc32_data_len = dev_size - crc32_data_offset;
+	data_len = dev_size - data_offset;
+
+	calc = crc32_le(~0, buf + crc32_data_offset, crc32_data_len) ^ ~0L;
+	if (calc != crc32) {
+		dev_err(dev, "Invalid calculated CRC32: 0x%08x (expected: 0x%08x)\n", calc, crc32);
+		err = -EINVAL;
+		goto err_kfree;
+	}
+
+	buf[dev_size - 1] = '\0';
+	err = u_boot_env_parse_cells(dev, nvmem, buf, data_offset, data_len);
+
+err_kfree:
+	kfree(buf);
+err_out:
+	return err;
+}
+EXPORT_SYMBOL_GPL(u_boot_env_parse);
+
+static int u_boot_env_add_cells(struct nvmem_layout *layout)
+{
+	struct device *dev = &layout->dev;
+	enum u_boot_env_format format;
+
+	format = (uintptr_t)device_get_match_data(dev);
+
+	return u_boot_env_parse(dev, layout->nvmem, format);
+}
+
+static int u_boot_env_probe(struct nvmem_layout *layout)
+{
+	layout->add_cells = u_boot_env_add_cells;
+
+	return nvmem_layout_register(layout);
+}
+
+static void u_boot_env_remove(struct nvmem_layout *layout)
+{
+	nvmem_layout_unregister(layout);
+}
+
+static const struct of_device_id u_boot_env_of_match_table[] = {
+	{ .compatible = "u-boot,env", .data = (void *)U_BOOT_FORMAT_SINGLE, },
+	{ .compatible = "u-boot,env-redundant-bool", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
+	{ .compatible = "u-boot,env-redundant-count", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
+	{ .compatible = "brcm,env", .data = (void *)U_BOOT_FORMAT_BROADCOM, },
+	{},
+};
+
+static struct nvmem_layout_driver u_boot_env_layout = {
+	.driver = {
+		.name = "u-boot-env-layout",
+		.of_match_table = u_boot_env_of_match_table,
+	},
+	.probe = u_boot_env_probe,
+	.remove = u_boot_env_remove,
+};
+module_nvmem_layout_driver(u_boot_env_layout);
+
+MODULE_AUTHOR("Rafał Miłecki");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, u_boot_env_of_match_table);
+MODULE_DESCRIPTION("NVMEM layout driver for U-Boot environment variables");
diff --git a/drivers/nvmem/layouts/u-boot-env.h b/drivers/nvmem/layouts/u-boot-env.h
new file mode 100644
index 000000000..dd5f280ac
--- /dev/null
+++ b/drivers/nvmem/layouts/u-boot-env.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _LINUX_NVMEM_LAYOUTS_U_BOOT_ENV_H
+#define _LINUX_NVMEM_LAYOUTS_U_BOOT_ENV_H
+
+enum u_boot_env_format {
+	U_BOOT_FORMAT_SINGLE,
+	U_BOOT_FORMAT_REDUNDANT,
+	U_BOOT_FORMAT_BROADCOM,
+};
+
+int u_boot_env_parse(struct device *dev, struct nvmem_device *nvmem,
+		     enum u_boot_env_format format);
+
+#endif  /* ifndef _LINUX_NVMEM_LAYOUTS_U_BOOT_ENV_H */
diff --git a/drivers/nvmem/lpc18xx_eeprom.c b/drivers/nvmem/lpc18xx_eeprom.c
new file mode 100644
index 000000000..504155e30
--- /dev/null
+++ b/drivers/nvmem/lpc18xx_eeprom.c
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * NXP LPC18xx/LPC43xx EEPROM memory NVMEM driver
+ *
+ * Copyright (c) 2015 Ariel D'Alessandro <ariel@vanguardiasur.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+/* Registers */
+#define LPC18XX_EEPROM_AUTOPROG			0x00c
+#define LPC18XX_EEPROM_AUTOPROG_WORD		0x1
+
+#define LPC18XX_EEPROM_CLKDIV			0x014
+
+#define LPC18XX_EEPROM_PWRDWN			0x018
+#define LPC18XX_EEPROM_PWRDWN_NO		0x0
+#define LPC18XX_EEPROM_PWRDWN_YES		0x1
+
+#define LPC18XX_EEPROM_INTSTAT			0xfe0
+#define LPC18XX_EEPROM_INTSTAT_END_OF_PROG	BIT(2)
+
+#define LPC18XX_EEPROM_INTSTATCLR		0xfe8
+#define LPC18XX_EEPROM_INTSTATCLR_PROG_CLR_ST	BIT(2)
+
+/* Fixed page size (bytes) */
+#define LPC18XX_EEPROM_PAGE_SIZE		0x80
+
+/* EEPROM device requires a ~1500 kHz clock (min 800 kHz, max 1600 kHz) */
+#define LPC18XX_EEPROM_CLOCK_HZ			1500000
+
+/* EEPROM requires 3 ms of erase/program time between each writing */
+#define LPC18XX_EEPROM_PROGRAM_TIME		3
+
+struct lpc18xx_eeprom_dev {
+	struct clk *clk;
+	void __iomem *reg_base;
+	void __iomem *mem_base;
+	struct nvmem_device *nvmem;
+	unsigned reg_bytes;
+	unsigned val_bytes;
+	int size;
+};
+
+static inline void lpc18xx_eeprom_writel(struct lpc18xx_eeprom_dev *eeprom,
+					 u32 reg, u32 val)
+{
+	writel(val, eeprom->reg_base + reg);
+}
+
+static inline u32 lpc18xx_eeprom_readl(struct lpc18xx_eeprom_dev *eeprom,
+				       u32 reg)
+{
+	return readl(eeprom->reg_base + reg);
+}
+
+static int lpc18xx_eeprom_busywait_until_prog(struct lpc18xx_eeprom_dev *eeprom)
+{
+	unsigned long end;
+	u32 val;
+
+	/* Wait until EEPROM program operation has finished */
+	end = jiffies + msecs_to_jiffies(LPC18XX_EEPROM_PROGRAM_TIME * 10);
+
+	while (time_is_after_jiffies(end)) {
+		val = lpc18xx_eeprom_readl(eeprom, LPC18XX_EEPROM_INTSTAT);
+
+		if (val & LPC18XX_EEPROM_INTSTAT_END_OF_PROG) {
+			lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_INTSTATCLR,
+					LPC18XX_EEPROM_INTSTATCLR_PROG_CLR_ST);
+			return 0;
+		}
+
+		usleep_range(LPC18XX_EEPROM_PROGRAM_TIME * USEC_PER_MSEC,
+			     (LPC18XX_EEPROM_PROGRAM_TIME + 1) * USEC_PER_MSEC);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int lpc18xx_eeprom_gather_write(void *context, unsigned int reg,
+				       void *val, size_t bytes)
+{
+	struct lpc18xx_eeprom_dev *eeprom = context;
+	unsigned int offset = reg;
+	int ret;
+
+	/*
+	 * The last page contains the EEPROM initialization data and is not
+	 * writable.
+	 */
+	if ((reg > eeprom->size - LPC18XX_EEPROM_PAGE_SIZE) ||
+			(reg + bytes > eeprom->size - LPC18XX_EEPROM_PAGE_SIZE))
+		return -EINVAL;
+
+
+	lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
+			      LPC18XX_EEPROM_PWRDWN_NO);
+
+	/* Wait 100 us while the EEPROM wakes up */
+	usleep_range(100, 200);
+
+	while (bytes) {
+		writel(*(u32 *)val, eeprom->mem_base + offset);
+		ret = lpc18xx_eeprom_busywait_until_prog(eeprom);
+		if (ret < 0)
+			return ret;
+
+		bytes -= eeprom->val_bytes;
+		val += eeprom->val_bytes;
+		offset += eeprom->val_bytes;
+	}
+
+	lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
+			      LPC18XX_EEPROM_PWRDWN_YES);
+
+	return 0;
+}
+
+static int lpc18xx_eeprom_read(void *context, unsigned int offset,
+			       void *val, size_t bytes)
+{
+	struct lpc18xx_eeprom_dev *eeprom = context;
+
+	lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
+			      LPC18XX_EEPROM_PWRDWN_NO);
+
+	/* Wait 100 us while the EEPROM wakes up */
+	usleep_range(100, 200);
+
+	while (bytes) {
+		*(u32 *)val = readl(eeprom->mem_base + offset);
+		bytes -= eeprom->val_bytes;
+		val += eeprom->val_bytes;
+		offset += eeprom->val_bytes;
+	}
+
+	lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
+			      LPC18XX_EEPROM_PWRDWN_YES);
+
+	return 0;
+}
+
+
+static struct nvmem_config lpc18xx_nvmem_config = {
+	.name = "lpc18xx-eeprom",
+	.stride = 4,
+	.word_size = 4,
+	.reg_read = lpc18xx_eeprom_read,
+	.reg_write = lpc18xx_eeprom_gather_write,
+};
+
+static int lpc18xx_eeprom_probe(struct platform_device *pdev)
+{
+	struct lpc18xx_eeprom_dev *eeprom;
+	struct device *dev = &pdev->dev;
+	struct reset_control *rst;
+	unsigned long clk_rate;
+	struct resource *res;
+	int ret;
+
+	eeprom = devm_kzalloc(dev, sizeof(*eeprom), GFP_KERNEL);
+	if (!eeprom)
+		return -ENOMEM;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "reg");
+	eeprom->reg_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(eeprom->reg_base))
+		return PTR_ERR(eeprom->reg_base);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem");
+	eeprom->mem_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(eeprom->mem_base))
+		return PTR_ERR(eeprom->mem_base);
+
+	eeprom->clk = devm_clk_get(&pdev->dev, "eeprom");
+	if (IS_ERR(eeprom->clk)) {
+		dev_err(&pdev->dev, "failed to get eeprom clock\n");
+		return PTR_ERR(eeprom->clk);
+	}
+
+	ret = clk_prepare_enable(eeprom->clk);
+	if (ret < 0) {
+		dev_err(dev, "failed to prepare/enable eeprom clk: %d\n", ret);
+		return ret;
+	}
+
+	rst = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(rst)) {
+		dev_err(dev, "failed to get reset: %ld\n", PTR_ERR(rst));
+		ret = PTR_ERR(rst);
+		goto err_clk;
+	}
+
+	ret = reset_control_assert(rst);
+	if (ret < 0) {
+		dev_err(dev, "failed to assert reset: %d\n", ret);
+		goto err_clk;
+	}
+
+	eeprom->val_bytes = 4;
+	eeprom->reg_bytes = 4;
+
+	/*
+	 * Clock rate is generated by dividing the system bus clock by the
+	 * division factor, contained in the divider register (minus 1 encoded).
+	 */
+	clk_rate = clk_get_rate(eeprom->clk);
+	clk_rate = DIV_ROUND_UP(clk_rate, LPC18XX_EEPROM_CLOCK_HZ) - 1;
+	lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_CLKDIV, clk_rate);
+
+	/*
+	 * Writing a single word to the page will start the erase/program cycle
+	 * automatically
+	 */
+	lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_AUTOPROG,
+			      LPC18XX_EEPROM_AUTOPROG_WORD);
+
+	lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
+			      LPC18XX_EEPROM_PWRDWN_YES);
+
+	eeprom->size = resource_size(res);
+	lpc18xx_nvmem_config.size = resource_size(res);
+	lpc18xx_nvmem_config.dev = dev;
+	lpc18xx_nvmem_config.priv = eeprom;
+
+	eeprom->nvmem = devm_nvmem_register(dev, &lpc18xx_nvmem_config);
+	if (IS_ERR(eeprom->nvmem)) {
+		ret = PTR_ERR(eeprom->nvmem);
+		goto err_clk;
+	}
+
+	platform_set_drvdata(pdev, eeprom);
+
+	return 0;
+
+err_clk:
+	clk_disable_unprepare(eeprom->clk);
+
+	return ret;
+}
+
+static void lpc18xx_eeprom_remove(struct platform_device *pdev)
+{
+	struct lpc18xx_eeprom_dev *eeprom = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(eeprom->clk);
+}
+
+static const struct of_device_id lpc18xx_eeprom_of_match[] = {
+	{ .compatible = "nxp,lpc1857-eeprom" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_eeprom_of_match);
+
+static struct platform_driver lpc18xx_eeprom_driver = {
+	.probe = lpc18xx_eeprom_probe,
+	.remove = lpc18xx_eeprom_remove,
+	.driver = {
+		.name = "lpc18xx-eeprom",
+		.of_match_table = lpc18xx_eeprom_of_match,
+	},
+};
+
+module_platform_driver(lpc18xx_eeprom_driver);
+
+MODULE_AUTHOR("Ariel D'Alessandro <ariel@vanguardiasur.com.ar>");
+MODULE_DESCRIPTION("NXP LPC18xx EEPROM memory Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/lpc18xx_otp.c b/drivers/nvmem/lpc18xx_otp.c
new file mode 100644
index 000000000..c41a0c58b
--- /dev/null
+++ b/drivers/nvmem/lpc18xx_otp.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * NXP LPC18xx/43xx OTP memory NVMEM driver
+ *
+ * Copyright (c) 2016 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Based on the imx ocotp driver,
+ * Copyright (c) 2015 Pengutronix, Philipp Zabel <p.zabel@pengutronix.de>
+ *
+ * TODO: add support for writing OTP register via API in boot ROM.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/*
+ * LPC18xx OTP memory contains 4 banks with 4 32-bit words. Bank 0 starts
+ * at offset 0 from the base.
+ *
+ * Bank 0 contains the part ID for Flashless devices and is reserved for
+ * devices with Flash.
+ * Bank 1/2 is generale purpose or AES key storage for secure devices.
+ * Bank 3 contains control data, USB ID and generale purpose words.
+ */
+#define LPC18XX_OTP_NUM_BANKS		4
+#define LPC18XX_OTP_WORDS_PER_BANK	4
+#define LPC18XX_OTP_WORD_SIZE		sizeof(u32)
+#define LPC18XX_OTP_SIZE		(LPC18XX_OTP_NUM_BANKS * \
+					 LPC18XX_OTP_WORDS_PER_BANK * \
+					 LPC18XX_OTP_WORD_SIZE)
+
+struct lpc18xx_otp {
+	void __iomem *base;
+};
+
+static int lpc18xx_otp_read(void *context, unsigned int offset,
+			    void *val, size_t bytes)
+{
+	struct lpc18xx_otp *otp = context;
+	unsigned int count = bytes >> 2;
+	u32 index = offset >> 2;
+	u32 *buf = val;
+	int i;
+
+	if (count > (LPC18XX_OTP_SIZE - index))
+		count = LPC18XX_OTP_SIZE - index;
+
+	for (i = index; i < (index + count); i++)
+		*buf++ = readl(otp->base + i * LPC18XX_OTP_WORD_SIZE);
+
+	return 0;
+}
+
+static struct nvmem_config lpc18xx_otp_nvmem_config = {
+	.name = "lpc18xx-otp",
+	.read_only = true,
+	.word_size = LPC18XX_OTP_WORD_SIZE,
+	.stride = LPC18XX_OTP_WORD_SIZE,
+	.reg_read = lpc18xx_otp_read,
+};
+
+static int lpc18xx_otp_probe(struct platform_device *pdev)
+{
+	struct nvmem_device *nvmem;
+	struct lpc18xx_otp *otp;
+
+	otp = devm_kzalloc(&pdev->dev, sizeof(*otp), GFP_KERNEL);
+	if (!otp)
+		return -ENOMEM;
+
+	otp->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(otp->base))
+		return PTR_ERR(otp->base);
+
+	lpc18xx_otp_nvmem_config.size = LPC18XX_OTP_SIZE;
+	lpc18xx_otp_nvmem_config.dev = &pdev->dev;
+	lpc18xx_otp_nvmem_config.priv = otp;
+
+	nvmem = devm_nvmem_register(&pdev->dev, &lpc18xx_otp_nvmem_config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id lpc18xx_otp_dt_ids[] = {
+	{ .compatible = "nxp,lpc1850-otp" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_otp_dt_ids);
+
+static struct platform_driver lpc18xx_otp_driver = {
+	.probe	= lpc18xx_otp_probe,
+	.driver = {
+		.name	= "lpc18xx_otp",
+		.of_match_table = lpc18xx_otp_dt_ids,
+	},
+};
+module_platform_driver(lpc18xx_otp_driver);
+
+MODULE_AUTHOR("Joachim Eastwoood <manabian@gmail.com>");
+MODULE_DESCRIPTION("NXP LPC18xx OTP NVMEM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/m24lr.c b/drivers/nvmem/m24lr.c
new file mode 100644
index 000000000..7a9fd45a8
--- /dev/null
+++ b/drivers/nvmem/m24lr.c
@@ -0,0 +1,606 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * m24lr.c - Sysfs control interface for ST M24LR series RFID/NFC chips
+ *
+ * Copyright (c) 2025 Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
+ *
+ * This driver implements both the sysfs-based control interface and EEPROM
+ * access for STMicroelectronics M24LR series chips (e.g., M24LR04E-R).
+ * It provides access to control registers for features such as password
+ * authentication, memory protection, and device configuration. In addition,
+ * it manages read and write operations to the EEPROM region of the chip.
+ */
+
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#define M24LR_WRITE_TIMEOUT	  25u
+#define M24LR_READ_TIMEOUT	  (M24LR_WRITE_TIMEOUT)
+
+/**
+ * struct m24lr_chip - describes chip-specific sysfs layout
+ * @sss_len:       the length of the sss region
+ * @page_size:	   chip-specific limit on the maximum number of bytes allowed
+ *		   in a single write operation.
+ * @eeprom_size:   size of the EEPROM in byte
+ *
+ * Supports multiple M24LR chip variants (e.g., M24LRxx) by allowing each
+ * to define its own set of sysfs attributes, depending on its available
+ * registers and features.
+ */
+struct m24lr_chip {
+	unsigned int sss_len;
+	unsigned int page_size;
+	unsigned int eeprom_size;
+};
+
+/**
+ * struct m24lr - core driver data for M24LR chip control
+ * @uid:           64 bits unique identifier stored in the device
+ * @sss_len:       the length of the sss region
+ * @page_size:	   chip-specific limit on the maximum number of bytes allowed
+ *		   in a single write operation.
+ * @eeprom_size:   size of the EEPROM in byte
+ * @ctl_regmap:	   regmap interface for accessing the system parameter sector
+ * @eeprom_regmap: regmap interface for accessing the EEPROM
+ * @lock:	   mutex to synchronize operations to the device
+ *
+ * Central data structure holding the state and resources used by the
+ * M24LR device driver.
+ */
+struct m24lr {
+	u64 uid;
+	unsigned int sss_len;
+	unsigned int page_size;
+	unsigned int eeprom_size;
+	struct regmap *ctl_regmap;
+	struct regmap *eeprom_regmap;
+	struct mutex lock;	 /* synchronize operations to the device */
+};
+
+static const struct regmap_range m24lr_ctl_vo_ranges[] = {
+	regmap_reg_range(0, 63),
+};
+
+static const struct regmap_access_table m24lr_ctl_vo_table = {
+	.yes_ranges = m24lr_ctl_vo_ranges,
+	.n_yes_ranges = ARRAY_SIZE(m24lr_ctl_vo_ranges),
+};
+
+static const struct regmap_config m24lr_ctl_regmap_conf = {
+	.name = "m24lr_ctl",
+	.reg_stride = 1,
+	.reg_bits = 16,
+	.val_bits = 8,
+	.disable_locking = false,
+	.cache_type = REGCACHE_RBTREE,/* Flat can't be used, there's huge gap */
+	.volatile_table = &m24lr_ctl_vo_table,
+};
+
+/* Chip descriptor for M24LR04E-R variant */
+static const struct m24lr_chip m24lr04e_r_chip = {
+	.page_size = 4,
+	.eeprom_size = 512,
+	.sss_len = 4,
+};
+
+/* Chip descriptor for M24LR16E-R variant */
+static const struct m24lr_chip m24lr16e_r_chip = {
+	.page_size = 4,
+	.eeprom_size = 2048,
+	.sss_len = 16,
+};
+
+/* Chip descriptor for M24LR64E-R variant */
+static const struct m24lr_chip m24lr64e_r_chip = {
+	.page_size = 4,
+	.eeprom_size = 8192,
+	.sss_len = 64,
+};
+
+static const struct i2c_device_id m24lr_ids[] = {
+	{ "m24lr04e-r", (kernel_ulong_t)&m24lr04e_r_chip},
+	{ "m24lr16e-r", (kernel_ulong_t)&m24lr16e_r_chip},
+	{ "m24lr64e-r", (kernel_ulong_t)&m24lr64e_r_chip},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, m24lr_ids);
+
+static const struct of_device_id m24lr_of_match[] = {
+	{ .compatible = "st,m24lr04e-r", .data = &m24lr04e_r_chip},
+	{ .compatible = "st,m24lr16e-r", .data = &m24lr16e_r_chip},
+	{ .compatible = "st,m24lr64e-r", .data = &m24lr64e_r_chip},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, m24lr_of_match);
+
+/**
+ * m24lr_regmap_read - read data using regmap with retry on failure
+ * @regmap:  regmap instance for the device
+ * @buf:     buffer to store the read data
+ * @size:    number of bytes to read
+ * @offset:  starting register address
+ *
+ * Attempts to read a block of data from the device with retries and timeout.
+ * Some M24LR chips may transiently NACK reads (e.g., during internal write
+ * cycles), so this function retries with a short sleep until the timeout
+ * expires.
+ *
+ * Returns:
+ *	 Number of bytes read on success,
+ *	 -ETIMEDOUT if the read fails within the timeout window.
+ */
+static ssize_t m24lr_regmap_read(struct regmap *regmap, u8 *buf,
+				 size_t size, unsigned int offset)
+{
+	int err;
+	unsigned long timeout, read_time;
+	ssize_t ret = -ETIMEDOUT;
+
+	timeout = jiffies + msecs_to_jiffies(M24LR_READ_TIMEOUT);
+	do {
+		read_time = jiffies;
+
+		err = regmap_bulk_read(regmap, offset, buf, size);
+		if (!err) {
+			ret = size;
+			break;
+		}
+
+		usleep_range(1000, 2000);
+	} while (time_before(read_time, timeout));
+
+	return ret;
+}
+
+/**
+ * m24lr_regmap_write - write data using regmap with retry on failure
+ * @regmap: regmap instance for the device
+ * @buf:    buffer containing the data to write
+ * @size:   number of bytes to write
+ * @offset: starting register address
+ *
+ * Attempts to write a block of data to the device with retries and a timeout.
+ * Some M24LR devices may NACK I2C writes while an internal write operation
+ * is in progress. This function retries the write operation with a short delay
+ * until it succeeds or the timeout is reached.
+ *
+ * Returns:
+ *	 Number of bytes written on success,
+ *	 -ETIMEDOUT if the write fails within the timeout window.
+ */
+static ssize_t m24lr_regmap_write(struct regmap *regmap, const u8 *buf,
+				  size_t size, unsigned int offset)
+{
+	int err;
+	unsigned long timeout, write_time;
+	ssize_t ret = -ETIMEDOUT;
+
+	timeout = jiffies + msecs_to_jiffies(M24LR_WRITE_TIMEOUT);
+
+	do {
+		write_time = jiffies;
+
+		err = regmap_bulk_write(regmap, offset, buf, size);
+		if (!err) {
+			ret = size;
+			break;
+		}
+
+		usleep_range(1000, 2000);
+	} while (time_before(write_time, timeout));
+
+	return ret;
+}
+
+static ssize_t m24lr_read(struct m24lr *m24lr, u8 *buf, size_t size,
+			  unsigned int offset, bool is_eeprom)
+{
+	struct regmap *regmap;
+	ssize_t ret;
+
+	if (is_eeprom)
+		regmap = m24lr->eeprom_regmap;
+	else
+		regmap = m24lr->ctl_regmap;
+
+	mutex_lock(&m24lr->lock);
+	ret = m24lr_regmap_read(regmap, buf, size, offset);
+	mutex_unlock(&m24lr->lock);
+
+	return ret;
+}
+
+/**
+ * m24lr_write - write buffer to M24LR device with page alignment handling
+ * @m24lr:     pointer to driver context
+ * @buf:       data buffer to write
+ * @size:      number of bytes to write
+ * @offset:    target register address in the device
+ * @is_eeprom: true if the write should target the EEPROM,
+ *             false if it should target the system parameters sector.
+ *
+ * Writes data to the M24LR device using regmap, split into chunks no larger
+ * than page_size to respect device-specific write limitations (e.g., page
+ * size or I2C hold-time concerns). Each chunk is aligned to the page boundary
+ * defined by page_size.
+ *
+ * Returns:
+ *	 Total number of bytes written on success,
+ *	 A negative error code if any write fails.
+ */
+static ssize_t m24lr_write(struct m24lr *m24lr, const u8 *buf, size_t size,
+			   unsigned int offset, bool is_eeprom)
+{
+	unsigned int n, next_sector;
+	struct regmap *regmap;
+	ssize_t ret = 0;
+	ssize_t err;
+
+	if (is_eeprom)
+		regmap = m24lr->eeprom_regmap;
+	else
+		regmap = m24lr->ctl_regmap;
+
+	n = min_t(unsigned int, size, m24lr->page_size);
+	next_sector = roundup(offset + 1, m24lr->page_size);
+	if (offset + n > next_sector)
+		n = next_sector - offset;
+
+	mutex_lock(&m24lr->lock);
+	while (n) {
+		err = m24lr_regmap_write(regmap, buf + offset, n, offset);
+		if (IS_ERR_VALUE(err)) {
+			if (!ret)
+				ret = err;
+
+			break;
+		}
+
+		offset += n;
+		size -= n;
+		ret += n;
+		n = min_t(unsigned int, size, m24lr->page_size);
+	}
+	mutex_unlock(&m24lr->lock);
+
+	return ret;
+}
+
+/**
+ * m24lr_write_pass - Write password to M24LR043-R using secure format
+ * @m24lr: Pointer to device control structure
+ * @buf:   Input buffer containing hex-encoded password
+ * @count: Number of bytes in @buf
+ * @code:  Operation code to embed between password copies
+ *
+ * This function parses a 4-byte password, encodes it in  big-endian format,
+ * and constructs a 9-byte sequence of the form:
+ *
+ *	  [BE(password), code, BE(password)]
+ *
+ * The result is written to register 0x0900 (2304), which is the password
+ * register in M24LR04E-R chip.
+ *
+ * Return: Number of bytes written on success, or negative error code on failure
+ */
+static ssize_t m24lr_write_pass(struct m24lr *m24lr, const char *buf,
+				size_t count, u8 code)
+{
+	__be32 be_pass;
+	u8 output[9];
+	ssize_t ret;
+	u32 pass;
+	int err;
+
+	if (!count)
+		return -EINVAL;
+
+	if (count > 8)
+		return -EINVAL;
+
+	err = kstrtou32(buf, 16, &pass);
+	if (err)
+		return err;
+
+	be_pass = cpu_to_be32(pass);
+
+	memcpy(output, &be_pass, sizeof(be_pass));
+	output[4] = code;
+	memcpy(output + 5, &be_pass, sizeof(be_pass));
+
+	mutex_lock(&m24lr->lock);
+	ret = m24lr_regmap_write(m24lr->ctl_regmap, output, 9, 2304);
+	mutex_unlock(&m24lr->lock);
+
+	return ret;
+}
+
+static ssize_t m24lr_read_reg_le(struct m24lr *m24lr, u64 *val,
+				 unsigned int reg_addr,
+				 unsigned int reg_size)
+{
+	ssize_t ret;
+	__le64 input = 0;
+
+	ret = m24lr_read(m24lr, (u8 *)&input, reg_size, reg_addr, false);
+	if (IS_ERR_VALUE(ret))
+		return ret;
+
+	if (ret != reg_size)
+		return -EINVAL;
+
+	switch (reg_size) {
+	case 1:
+		*val = *(u8 *)&input;
+		break;
+	case 2:
+		*val = le16_to_cpu((__le16)input);
+		break;
+	case 4:
+		*val = le32_to_cpu((__le32)input);
+		break;
+	case 8:
+		*val = le64_to_cpu((__le64)input);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int m24lr_nvmem_read(void *priv, unsigned int offset, void *val,
+			    size_t bytes)
+{
+	ssize_t err;
+	struct m24lr *m24lr = priv;
+
+	if (!bytes)
+		return bytes;
+
+	if (offset + bytes > m24lr->eeprom_size)
+		return -EINVAL;
+
+	err = m24lr_read(m24lr, val, bytes, offset, true);
+	if (IS_ERR_VALUE(err))
+		return err;
+
+	return 0;
+}
+
+static int m24lr_nvmem_write(void *priv, unsigned int offset, void *val,
+			     size_t bytes)
+{
+	ssize_t err;
+	struct m24lr *m24lr = priv;
+
+	if (!bytes)
+		return -EINVAL;
+
+	if (offset + bytes > m24lr->eeprom_size)
+		return -EINVAL;
+
+	err = m24lr_write(m24lr, val, bytes, offset, true);
+	if (IS_ERR_VALUE(err))
+		return err;
+
+	return 0;
+}
+
+static ssize_t m24lr_ctl_sss_read(struct file *filep, struct kobject *kobj,
+				  const struct bin_attribute *attr, char *buf,
+				  loff_t offset, size_t count)
+{
+	struct m24lr *m24lr = attr->private;
+
+	if (!count)
+		return count;
+
+	if (size_add(offset, count) > m24lr->sss_len)
+		return -EINVAL;
+
+	return m24lr_read(m24lr, buf, count, offset, false);
+}
+
+static ssize_t m24lr_ctl_sss_write(struct file *filep, struct kobject *kobj,
+				   const struct bin_attribute *attr, char *buf,
+				   loff_t offset, size_t count)
+{
+	struct m24lr *m24lr = attr->private;
+
+	if (!count)
+		return -EINVAL;
+
+	if (size_add(offset, count) > m24lr->sss_len)
+		return -EINVAL;
+
+	return m24lr_write(m24lr, buf, count, offset, false);
+}
+static BIN_ATTR(sss, 0600, m24lr_ctl_sss_read, m24lr_ctl_sss_write, 0);
+
+static ssize_t new_pass_store(struct device *dev, struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct m24lr *m24lr = i2c_get_clientdata(to_i2c_client(dev));
+
+	return m24lr_write_pass(m24lr, buf, count, 7);
+}
+static DEVICE_ATTR_WO(new_pass);
+
+static ssize_t unlock_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct m24lr *m24lr = i2c_get_clientdata(to_i2c_client(dev));
+
+	return m24lr_write_pass(m24lr, buf, count, 9);
+}
+static DEVICE_ATTR_WO(unlock);
+
+static ssize_t uid_show(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct m24lr *m24lr = i2c_get_clientdata(to_i2c_client(dev));
+
+	return sysfs_emit(buf, "%llx\n", m24lr->uid);
+}
+static DEVICE_ATTR_RO(uid);
+
+static ssize_t total_sectors_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct m24lr *m24lr = i2c_get_clientdata(to_i2c_client(dev));
+
+	return sysfs_emit(buf, "%x\n", m24lr->sss_len);
+}
+static DEVICE_ATTR_RO(total_sectors);
+
+static struct attribute *m24lr_ctl_dev_attrs[] = {
+	&dev_attr_unlock.attr,
+	&dev_attr_new_pass.attr,
+	&dev_attr_uid.attr,
+	&dev_attr_total_sectors.attr,
+	NULL,
+};
+
+static const struct m24lr_chip *m24lr_get_chip(struct device *dev)
+{
+	const struct m24lr_chip *ret;
+	const struct i2c_device_id *id;
+
+	id = i2c_match_id(m24lr_ids, to_i2c_client(dev));
+
+	if (dev->of_node && of_match_device(m24lr_of_match, dev))
+		ret = of_device_get_match_data(dev);
+	else if (id)
+		ret = (void *)id->driver_data;
+	else
+		ret = acpi_device_get_match_data(dev);
+
+	return ret;
+}
+
+static int m24lr_probe(struct i2c_client *client)
+{
+	struct regmap_config eeprom_regmap_conf = {0};
+	struct nvmem_config nvmem_conf = {0};
+	struct device *dev = &client->dev;
+	struct i2c_client *eeprom_client;
+	const struct m24lr_chip *chip;
+	struct regmap *eeprom_regmap;
+	struct nvmem_device *nvmem;
+	struct regmap *ctl_regmap;
+	struct m24lr *m24lr;
+	u32 regs[2];
+	long err;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -EOPNOTSUPP;
+
+	chip = m24lr_get_chip(dev);
+	if (!chip)
+		return -ENODEV;
+
+	m24lr = devm_kzalloc(dev, sizeof(struct m24lr), GFP_KERNEL);
+	if (!m24lr)
+		return -ENOMEM;
+
+	err = device_property_read_u32_array(dev, "reg", regs, ARRAY_SIZE(regs));
+	if (err)
+		return dev_err_probe(dev, err, "Failed to read 'reg' property\n");
+
+	/* Create a second I2C client for the eeprom interface */
+	eeprom_client = devm_i2c_new_dummy_device(dev, client->adapter, regs[1]);
+	if (IS_ERR(eeprom_client))
+		return dev_err_probe(dev, PTR_ERR(eeprom_client),
+				     "Failed to create dummy I2C client for the EEPROM\n");
+
+	ctl_regmap = devm_regmap_init_i2c(client, &m24lr_ctl_regmap_conf);
+	if (IS_ERR(ctl_regmap))
+		return dev_err_probe(dev, PTR_ERR(ctl_regmap),
+				      "Failed to init regmap\n");
+
+	eeprom_regmap_conf.name = "m24lr_eeprom";
+	eeprom_regmap_conf.reg_bits = 16;
+	eeprom_regmap_conf.val_bits = 8;
+	eeprom_regmap_conf.disable_locking = true;
+	eeprom_regmap_conf.max_register = chip->eeprom_size - 1;
+
+	eeprom_regmap = devm_regmap_init_i2c(eeprom_client,
+					     &eeprom_regmap_conf);
+	if (IS_ERR(eeprom_regmap))
+		return dev_err_probe(dev, PTR_ERR(eeprom_regmap),
+				     "Failed to init regmap\n");
+
+	mutex_init(&m24lr->lock);
+	m24lr->sss_len = chip->sss_len;
+	m24lr->page_size = chip->page_size;
+	m24lr->eeprom_size = chip->eeprom_size;
+	m24lr->eeprom_regmap = eeprom_regmap;
+	m24lr->ctl_regmap = ctl_regmap;
+
+	nvmem_conf.dev = &eeprom_client->dev;
+	nvmem_conf.owner = THIS_MODULE;
+	nvmem_conf.type = NVMEM_TYPE_EEPROM;
+	nvmem_conf.reg_read = m24lr_nvmem_read;
+	nvmem_conf.reg_write = m24lr_nvmem_write;
+	nvmem_conf.size = chip->eeprom_size;
+	nvmem_conf.word_size = 1;
+	nvmem_conf.stride = 1;
+	nvmem_conf.priv = m24lr;
+
+	nvmem = devm_nvmem_register(dev, &nvmem_conf);
+	if (IS_ERR(nvmem))
+		return dev_err_probe(dev, PTR_ERR(nvmem),
+				     "Failed to register nvmem\n");
+
+	i2c_set_clientdata(client, m24lr);
+	i2c_set_clientdata(eeprom_client, m24lr);
+
+	bin_attr_sss.size = chip->sss_len;
+	bin_attr_sss.private = m24lr;
+	err = sysfs_create_bin_file(&dev->kobj, &bin_attr_sss);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "Failed to create sss bin file\n");
+
+	/* test by reading the uid, if success store it */
+	err = m24lr_read_reg_le(m24lr, &m24lr->uid, 2324, sizeof(m24lr->uid));
+	if (IS_ERR_VALUE(err))
+		goto remove_bin_file;
+
+	return 0;
+
+remove_bin_file:
+	sysfs_remove_bin_file(&dev->kobj, &bin_attr_sss);
+
+	return err;
+}
+
+static void m24lr_remove(struct i2c_client *client)
+{
+	sysfs_remove_bin_file(&client->dev.kobj, &bin_attr_sss);
+}
+
+ATTRIBUTE_GROUPS(m24lr_ctl_dev);
+
+static struct i2c_driver m24lr_driver = {
+	.driver = {
+		.name = "m24lr",
+		.of_match_table = m24lr_of_match,
+		.dev_groups = m24lr_ctl_dev_groups,
+	},
+	.probe	  = m24lr_probe,
+	.remove = m24lr_remove,
+	.id_table = m24lr_ids,
+};
+module_i2c_driver(m24lr_driver);
+
+MODULE_AUTHOR("Abd-Alrhman Masalkhi");
+MODULE_DESCRIPTION("st m24lr control driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/max77759-nvmem.c b/drivers/nvmem/max77759-nvmem.c
new file mode 100644
index 000000000..283000ec3
--- /dev/null
+++ b/drivers/nvmem/max77759-nvmem.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright 2020 Google Inc
+// Copyright 2025 Linaro Ltd.
+//
+// NVMEM driver for Maxim MAX77759
+
+#include <linux/dev_printk.h>
+#include <linux/device.h>
+#include <linux/device/driver.h>
+#include <linux/err.h>
+#include <linux/mfd/max77759.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/overflow.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+
+#define MAX77759_NVMEM_OPCODE_HEADER_LEN 3
+/*
+ * NVMEM commands have a three byte header (which becomes part of the command),
+ * so we need to subtract that.
+ */
+#define MAX77759_NVMEM_SIZE (MAX77759_MAXQ_OPCODE_MAXLENGTH \
+			     - MAX77759_NVMEM_OPCODE_HEADER_LEN)
+
+struct max77759_nvmem {
+	struct device *dev;
+	struct max77759 *max77759;
+};
+
+static int max77759_nvmem_reg_read(void *priv, unsigned int offset,
+				   void *val, size_t bytes)
+{
+	struct max77759_nvmem *nvmem = priv;
+	DEFINE_FLEX(struct max77759_maxq_command, cmd, cmd, length,
+		    MAX77759_NVMEM_OPCODE_HEADER_LEN);
+	DEFINE_FLEX(struct max77759_maxq_response, rsp, rsp, length,
+		    MAX77759_MAXQ_OPCODE_MAXLENGTH);
+	int ret;
+
+	cmd->cmd[0] = MAX77759_MAXQ_OPCODE_USER_SPACE_READ;
+	cmd->cmd[1] = offset;
+	cmd->cmd[2] = bytes;
+	rsp->length = bytes + MAX77759_NVMEM_OPCODE_HEADER_LEN;
+
+	ret = max77759_maxq_command(nvmem->max77759, cmd, rsp);
+	if (ret < 0)
+		return ret;
+
+	if (memcmp(cmd->cmd, rsp->rsp, MAX77759_NVMEM_OPCODE_HEADER_LEN)) {
+		dev_warn(nvmem->dev, "protocol error (read)\n");
+		return -EIO;
+	}
+
+	memcpy(val, &rsp->rsp[MAX77759_NVMEM_OPCODE_HEADER_LEN], bytes);
+
+	return 0;
+}
+
+static int max77759_nvmem_reg_write(void *priv, unsigned int offset,
+				    void *val, size_t bytes)
+{
+	struct max77759_nvmem *nvmem = priv;
+	DEFINE_FLEX(struct max77759_maxq_command, cmd, cmd, length,
+		    MAX77759_MAXQ_OPCODE_MAXLENGTH);
+	DEFINE_FLEX(struct max77759_maxq_response, rsp, rsp, length,
+		    MAX77759_MAXQ_OPCODE_MAXLENGTH);
+	int ret;
+
+	cmd->cmd[0] = MAX77759_MAXQ_OPCODE_USER_SPACE_WRITE;
+	cmd->cmd[1] = offset;
+	cmd->cmd[2] = bytes;
+	memcpy(&cmd->cmd[MAX77759_NVMEM_OPCODE_HEADER_LEN], val, bytes);
+	cmd->length = bytes + MAX77759_NVMEM_OPCODE_HEADER_LEN;
+	rsp->length = cmd->length;
+
+	ret = max77759_maxq_command(nvmem->max77759, cmd, rsp);
+	if (ret < 0)
+		return ret;
+
+	if (memcmp(cmd->cmd, rsp->rsp, cmd->length)) {
+		dev_warn(nvmem->dev, "protocol error (write)\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int max77759_nvmem_probe(struct platform_device *pdev)
+{
+	struct nvmem_config config = {
+		.dev = &pdev->dev,
+		.name = dev_name(&pdev->dev),
+		.id = NVMEM_DEVID_NONE,
+		.type = NVMEM_TYPE_EEPROM,
+		.ignore_wp = true,
+		.size = MAX77759_NVMEM_SIZE,
+		.word_size = sizeof(u8),
+		.stride = sizeof(u8),
+		.reg_read = max77759_nvmem_reg_read,
+		.reg_write = max77759_nvmem_reg_write,
+	};
+	struct max77759_nvmem *nvmem;
+
+	nvmem = devm_kzalloc(&pdev->dev, sizeof(*nvmem), GFP_KERNEL);
+	if (!nvmem)
+		return -ENOMEM;
+
+	nvmem->dev = &pdev->dev;
+	nvmem->max77759 = dev_get_drvdata(pdev->dev.parent);
+
+	config.priv = nvmem;
+
+	return PTR_ERR_OR_ZERO(devm_nvmem_register(config.dev, &config));
+}
+
+static const struct of_device_id max77759_nvmem_of_id[] = {
+	{ .compatible = "maxim,max77759-nvmem", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max77759_nvmem_of_id);
+
+static const struct platform_device_id max77759_nvmem_platform_id[] = {
+	{ "max77759-nvmem", },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, max77759_nvmem_platform_id);
+
+static struct platform_driver max77759_nvmem_driver = {
+	.driver = {
+		.name = "max77759-nvmem",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+		.of_match_table = max77759_nvmem_of_id,
+	},
+	.probe = max77759_nvmem_probe,
+	.id_table = max77759_nvmem_platform_id,
+};
+
+module_platform_driver(max77759_nvmem_driver);
+
+MODULE_AUTHOR("André Draszik <andre.draszik@linaro.org>");
+MODULE_DESCRIPTION("NVMEM driver for Maxim MAX77759");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/meson-efuse.c b/drivers/nvmem/meson-efuse.c
new file mode 100644
index 000000000..d7f9ac99a
--- /dev/null
+++ b/drivers/nvmem/meson-efuse.c
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Amlogic Meson GX eFuse Driver
+ *
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include <linux/firmware/meson/meson_sm.h>
+
+static int meson_efuse_read(void *context, unsigned int offset,
+			    void *val, size_t bytes)
+{
+	struct meson_sm_firmware *fw = context;
+	int ret;
+
+	ret = meson_sm_call_read(fw, (u8 *)val, bytes, SM_EFUSE_READ, offset,
+				 bytes, 0, 0, 0);
+
+	return ret < 0 ? ret : 0;
+}
+
+static int meson_efuse_write(void *context, unsigned int offset,
+			     void *val, size_t bytes)
+{
+	struct meson_sm_firmware *fw = context;
+	int ret;
+
+	ret = meson_sm_call_write(fw, (u8 *)val, bytes, SM_EFUSE_WRITE, offset,
+				  bytes, 0, 0, 0);
+
+	return ret < 0 ? ret : 0;
+}
+
+static const struct of_device_id meson_efuse_match[] = {
+	{ .compatible = "amlogic,meson-gxbb-efuse", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, meson_efuse_match);
+
+static int meson_efuse_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct meson_sm_firmware *fw;
+	struct nvmem_device *nvmem;
+	struct nvmem_config *econfig;
+	struct clk *clk;
+	unsigned int size;
+	struct device_node *sm_np __free(device_node) =
+			of_parse_phandle(pdev->dev.of_node, "secure-monitor", 0);
+
+	if (!sm_np) {
+		dev_err(&pdev->dev, "no secure-monitor node\n");
+		return -ENODEV;
+	}
+
+	fw = meson_sm_get(sm_np);
+	if (!fw)
+		return -EPROBE_DEFER;
+
+	clk = devm_clk_get_enabled(dev, NULL);
+	if (IS_ERR(clk))
+		return dev_err_probe(dev, PTR_ERR(clk), "failed to get efuse gate");
+
+	if (meson_sm_call(fw, SM_EFUSE_USER_MAX, &size, 0, 0, 0, 0, 0) < 0) {
+		dev_err(dev, "failed to get max user");
+		return -EINVAL;
+	}
+
+	econfig = devm_kzalloc(dev, sizeof(*econfig), GFP_KERNEL);
+	if (!econfig)
+		return -ENOMEM;
+
+	econfig->dev = dev;
+	econfig->name = dev_name(dev);
+	econfig->add_legacy_fixed_of_cells = true;
+	econfig->stride = 1;
+	econfig->word_size = 1;
+	econfig->reg_read = meson_efuse_read;
+	econfig->reg_write = meson_efuse_write;
+	econfig->size = size;
+	econfig->priv = fw;
+
+	nvmem = devm_nvmem_register(&pdev->dev, econfig);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static struct platform_driver meson_efuse_driver = {
+	.probe = meson_efuse_probe,
+	.driver = {
+		.name = "meson-efuse",
+		.of_match_table = meson_efuse_match,
+	},
+};
+
+module_platform_driver(meson_efuse_driver);
+
+MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>");
+MODULE_DESCRIPTION("Amlogic Meson GX NVMEM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/meson-mx-efuse.c b/drivers/nvmem/meson-mx-efuse.c
new file mode 100644
index 000000000..8a16f5f02
--- /dev/null
+++ b/drivers/nvmem/meson-mx-efuse.c
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Amlogic Meson6, Meson8 and Meson8b eFuse Driver
+ *
+ * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+
+#define MESON_MX_EFUSE_CNTL1					0x04
+#define MESON_MX_EFUSE_CNTL1_PD_ENABLE				BIT(27)
+#define MESON_MX_EFUSE_CNTL1_AUTO_RD_BUSY			BIT(26)
+#define MESON_MX_EFUSE_CNTL1_AUTO_RD_START			BIT(25)
+#define MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE			BIT(24)
+#define MESON_MX_EFUSE_CNTL1_BYTE_WR_DATA			GENMASK(23, 16)
+#define MESON_MX_EFUSE_CNTL1_AUTO_WR_BUSY			BIT(14)
+#define MESON_MX_EFUSE_CNTL1_AUTO_WR_START			BIT(13)
+#define MESON_MX_EFUSE_CNTL1_AUTO_WR_ENABLE			BIT(12)
+#define MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET			BIT(11)
+#define MESON_MX_EFUSE_CNTL1_BYTE_ADDR_MASK			GENMASK(10, 0)
+
+#define MESON_MX_EFUSE_CNTL2					0x08
+
+#define MESON_MX_EFUSE_CNTL4					0x10
+#define MESON_MX_EFUSE_CNTL4_ENCRYPT_ENABLE			BIT(10)
+
+struct meson_mx_efuse_platform_data {
+	const char *name;
+	unsigned int word_size;
+};
+
+struct meson_mx_efuse {
+	void __iomem *base;
+	struct clk *core_clk;
+	struct nvmem_config config;
+};
+
+static void meson_mx_efuse_mask_bits(struct meson_mx_efuse *efuse, u32 reg,
+				     u32 mask, u32 set)
+{
+	u32 data;
+
+	data = readl(efuse->base + reg);
+	data &= ~mask;
+	data |= (set & mask);
+
+	writel(data, efuse->base + reg);
+}
+
+static int meson_mx_efuse_hw_enable(struct meson_mx_efuse *efuse)
+{
+	int err;
+
+	err = clk_prepare_enable(efuse->core_clk);
+	if (err)
+		return err;
+
+	/* power up the efuse */
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_PD_ENABLE, 0);
+
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL4,
+				 MESON_MX_EFUSE_CNTL4_ENCRYPT_ENABLE, 0);
+
+	return 0;
+}
+
+static void meson_mx_efuse_hw_disable(struct meson_mx_efuse *efuse)
+{
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_PD_ENABLE,
+				 MESON_MX_EFUSE_CNTL1_PD_ENABLE);
+
+	clk_disable_unprepare(efuse->core_clk);
+}
+
+static int meson_mx_efuse_read_addr(struct meson_mx_efuse *efuse,
+				    unsigned int addr, u32 *value)
+{
+	int err;
+	u32 regval;
+
+	/* write the address to read */
+	regval = FIELD_PREP(MESON_MX_EFUSE_CNTL1_BYTE_ADDR_MASK, addr);
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_BYTE_ADDR_MASK, regval);
+
+	/* inform the hardware that we changed the address */
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET,
+				 MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET);
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET, 0);
+
+	/* start the read process */
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_START,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_START);
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_START, 0);
+
+	/*
+	 * perform a dummy read to ensure that the HW has the RD_BUSY bit set
+	 * when polling for the status below.
+	 */
+	readl(efuse->base + MESON_MX_EFUSE_CNTL1);
+
+	err = readl_poll_timeout_atomic(efuse->base + MESON_MX_EFUSE_CNTL1,
+			regval,
+			(!(regval & MESON_MX_EFUSE_CNTL1_AUTO_RD_BUSY)),
+			1, 1000);
+	if (err) {
+		dev_err(efuse->config.dev,
+			"Timeout while reading efuse address %u\n", addr);
+		return err;
+	}
+
+	*value = readl(efuse->base + MESON_MX_EFUSE_CNTL2);
+
+	return 0;
+}
+
+static int meson_mx_efuse_read(void *context, unsigned int offset,
+			       void *buf, size_t bytes)
+{
+	struct meson_mx_efuse *efuse = context;
+	u32 tmp;
+	int err, i, addr;
+
+	err = meson_mx_efuse_hw_enable(efuse);
+	if (err)
+		return err;
+
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE);
+
+	for (i = 0; i < bytes; i += efuse->config.word_size) {
+		addr = (offset + i) / efuse->config.word_size;
+
+		err = meson_mx_efuse_read_addr(efuse, addr, &tmp);
+		if (err)
+			break;
+
+		memcpy(buf + i, &tmp,
+		       min_t(size_t, bytes - i, efuse->config.word_size));
+	}
+
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE, 0);
+
+	meson_mx_efuse_hw_disable(efuse);
+
+	return err;
+}
+
+static const struct meson_mx_efuse_platform_data meson6_efuse_data = {
+	.name = "meson6-efuse",
+	.word_size = 1,
+};
+
+static const struct meson_mx_efuse_platform_data meson8_efuse_data = {
+	.name = "meson8-efuse",
+	.word_size = 4,
+};
+
+static const struct meson_mx_efuse_platform_data meson8b_efuse_data = {
+	.name = "meson8b-efuse",
+	.word_size = 4,
+};
+
+static const struct of_device_id meson_mx_efuse_match[] = {
+	{ .compatible = "amlogic,meson6-efuse", .data = &meson6_efuse_data },
+	{ .compatible = "amlogic,meson8-efuse", .data = &meson8_efuse_data },
+	{ .compatible = "amlogic,meson8b-efuse", .data = &meson8b_efuse_data },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, meson_mx_efuse_match);
+
+static int meson_mx_efuse_probe(struct platform_device *pdev)
+{
+	const struct meson_mx_efuse_platform_data *drvdata;
+	struct meson_mx_efuse *efuse;
+	struct nvmem_device *nvmem;
+
+	drvdata = of_device_get_match_data(&pdev->dev);
+	if (!drvdata)
+		return -EINVAL;
+
+	efuse = devm_kzalloc(&pdev->dev, sizeof(*efuse), GFP_KERNEL);
+	if (!efuse)
+		return -ENOMEM;
+
+	efuse->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(efuse->base))
+		return PTR_ERR(efuse->base);
+
+	efuse->config.name = drvdata->name;
+	efuse->config.owner = THIS_MODULE;
+	efuse->config.dev = &pdev->dev;
+	efuse->config.priv = efuse;
+	efuse->config.add_legacy_fixed_of_cells = true;
+	efuse->config.stride = drvdata->word_size;
+	efuse->config.word_size = drvdata->word_size;
+	efuse->config.size = SZ_512;
+	efuse->config.read_only = true;
+	efuse->config.reg_read = meson_mx_efuse_read;
+
+	efuse->core_clk = devm_clk_get(&pdev->dev, "core");
+	if (IS_ERR(efuse->core_clk)) {
+		dev_err(&pdev->dev, "Failed to get core clock\n");
+		return PTR_ERR(efuse->core_clk);
+	}
+
+	nvmem = devm_nvmem_register(&pdev->dev, &efuse->config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static struct platform_driver meson_mx_efuse_driver = {
+	.probe = meson_mx_efuse_probe,
+	.driver = {
+		.name = "meson-mx-efuse",
+		.of_match_table = meson_mx_efuse_match,
+	},
+};
+
+module_platform_driver(meson_mx_efuse_driver);
+
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_DESCRIPTION("Amlogic Meson MX eFuse NVMEM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/microchip-otpc.c b/drivers/nvmem/microchip-otpc.c
new file mode 100644
index 000000000..df979e854
--- /dev/null
+++ b/drivers/nvmem/microchip-otpc.c
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * OTP Memory controller
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define MCHP_OTPC_CR			(0x0)
+#define MCHP_OTPC_CR_READ		BIT(6)
+#define MCHP_OTPC_MR			(0x4)
+#define MCHP_OTPC_MR_ADDR		GENMASK(31, 16)
+#define MCHP_OTPC_AR			(0x8)
+#define MCHP_OTPC_SR			(0xc)
+#define MCHP_OTPC_SR_READ		BIT(6)
+#define MCHP_OTPC_HR			(0x20)
+#define MCHP_OTPC_HR_SIZE		GENMASK(15, 8)
+#define MCHP_OTPC_DR			(0x24)
+
+#define MCHP_OTPC_NAME			"mchp-otpc"
+#define MCHP_OTPC_SIZE			(11 * 1024)
+
+/**
+ * struct mchp_otpc - OTPC private data structure
+ * @base: base address
+ * @dev: struct device pointer
+ * @packets: list of packets in OTP memory
+ * @npackets: number of packets in OTP memory
+ */
+struct mchp_otpc {
+	void __iomem *base;
+	struct device *dev;
+	struct list_head packets;
+	u32 npackets;
+};
+
+/**
+ * struct mchp_otpc_packet - OTPC packet data structure
+ * @list: list head
+ * @id: packet ID
+ * @offset: packet offset (in words) in OTP memory
+ */
+struct mchp_otpc_packet {
+	struct list_head list;
+	u32 id;
+	u32 offset;
+};
+
+static struct mchp_otpc_packet *mchp_otpc_id_to_packet(struct mchp_otpc *otpc,
+						       u32 id)
+{
+	struct mchp_otpc_packet *packet;
+
+	if (id >= otpc->npackets)
+		return NULL;
+
+	list_for_each_entry(packet, &otpc->packets, list) {
+		if (packet->id == id)
+			return packet;
+	}
+
+	return NULL;
+}
+
+static int mchp_otpc_prepare_read(struct mchp_otpc *otpc,
+				  unsigned int offset)
+{
+	u32 tmp;
+
+	/* Set address. */
+	tmp = readl_relaxed(otpc->base + MCHP_OTPC_MR);
+	tmp &= ~MCHP_OTPC_MR_ADDR;
+	tmp |= FIELD_PREP(MCHP_OTPC_MR_ADDR, offset);
+	writel_relaxed(tmp, otpc->base + MCHP_OTPC_MR);
+
+	/* Set read. */
+	tmp = readl_relaxed(otpc->base + MCHP_OTPC_CR);
+	tmp |= MCHP_OTPC_CR_READ;
+	writel_relaxed(tmp, otpc->base + MCHP_OTPC_CR);
+
+	/* Wait for packet to be transferred into temporary buffers. */
+	return read_poll_timeout(readl_relaxed, tmp, !(tmp & MCHP_OTPC_SR_READ),
+				 10000, 2000, false, otpc->base + MCHP_OTPC_SR);
+}
+
+/*
+ * OTPC memory is organized into packets. Each packets contains a header and
+ * a payload. Header is 4 bytes long and contains the size of the payload.
+ * Payload size varies. The memory footprint is something as follows:
+ *
+ * Memory offset  Memory footprint     Packet ID
+ * -------------  ----------------     ---------
+ *
+ * 0x0            +------------+   <-- packet 0
+ *                | header  0  |
+ * 0x4            +------------+
+ *                | payload 0  |
+ *                .            .
+ *                .    ...     .
+ *                .            .
+ * offset1        +------------+   <-- packet 1
+ *                | header  1  |
+ * offset1 + 0x4  +------------+
+ *                | payload 1  |
+ *                .            .
+ *                .    ...     .
+ *                .            .
+ * offset2        +------------+   <-- packet 2
+ *                .            .
+ *                .    ...     .
+ *                .            .
+ * offsetN        +------------+   <-- packet N
+ *                | header  N  |
+ * offsetN + 0x4  +------------+
+ *                | payload N  |
+ *                .            .
+ *                .    ...     .
+ *                .            .
+ *                +------------+
+ *
+ * where offset1, offset2, offsetN depends on the size of payload 0, payload 1,
+ * payload N-1.
+ *
+ * The access to memory is done on a per packet basis: the control registers
+ * need to be updated with an offset address (within a packet range) and the
+ * data registers will be update by controller with information contained by
+ * that packet. E.g. if control registers are updated with any address within
+ * the range [offset1, offset2) the data registers are updated by controller
+ * with packet 1. Header data is accessible though MCHP_OTPC_HR register.
+ * Payload data is accessible though MCHP_OTPC_DR and MCHP_OTPC_AR registers.
+ * There is no direct mapping b/w the offset requested by software and the
+ * offset returned by hardware.
+ *
+ * For this, the read function will return the first requested bytes in the
+ * packet. The user will have to be aware of the memory footprint before doing
+ * the read request.
+ */
+static int mchp_otpc_read(void *priv, unsigned int off, void *val,
+			  size_t bytes)
+{
+	struct mchp_otpc *otpc = priv;
+	struct mchp_otpc_packet *packet;
+	u32 *buf = val;
+	u32 offset;
+	size_t len = 0;
+	int ret, payload_size;
+
+	/*
+	 * We reach this point with off being multiple of stride = 4 to
+	 * be able to cross the subsystem. Inside the driver we use continuous
+	 * unsigned integer numbers for packet id, thus divide off by 4
+	 * before passing it to mchp_otpc_id_to_packet().
+	 */
+	packet = mchp_otpc_id_to_packet(otpc, off / 4);
+	if (!packet)
+		return -EINVAL;
+	offset = packet->offset;
+
+	while (len < bytes) {
+		ret = mchp_otpc_prepare_read(otpc, offset);
+		if (ret)
+			return ret;
+
+		/* Read and save header content. */
+		*buf++ = readl_relaxed(otpc->base + MCHP_OTPC_HR);
+		len += sizeof(*buf);
+		offset++;
+		if (len >= bytes)
+			break;
+
+		/* Read and save payload content. */
+		payload_size = FIELD_GET(MCHP_OTPC_HR_SIZE, *(buf - 1));
+		writel_relaxed(0UL, otpc->base + MCHP_OTPC_AR);
+		do {
+			*buf++ = readl_relaxed(otpc->base + MCHP_OTPC_DR);
+			len += sizeof(*buf);
+			offset++;
+			payload_size--;
+		} while (payload_size >= 0 && len < bytes);
+	}
+
+	return 0;
+}
+
+static int mchp_otpc_init_packets_list(struct mchp_otpc *otpc, u32 *size)
+{
+	struct mchp_otpc_packet *packet;
+	u32 word, word_pos = 0, id = 0, npackets = 0, payload_size;
+	int ret;
+
+	INIT_LIST_HEAD(&otpc->packets);
+	*size = 0;
+
+	while (*size < MCHP_OTPC_SIZE) {
+		ret = mchp_otpc_prepare_read(otpc, word_pos);
+		if (ret)
+			return ret;
+
+		word = readl_relaxed(otpc->base + MCHP_OTPC_HR);
+		payload_size = FIELD_GET(MCHP_OTPC_HR_SIZE, word);
+		if (!payload_size)
+			break;
+
+		packet = devm_kzalloc(otpc->dev, sizeof(*packet), GFP_KERNEL);
+		if (!packet)
+			return -ENOMEM;
+
+		packet->id = id++;
+		packet->offset = word_pos;
+		INIT_LIST_HEAD(&packet->list);
+		list_add_tail(&packet->list, &otpc->packets);
+
+		/* Count size by adding header and paload sizes. */
+		*size += 4 * (payload_size + 1);
+		/* Next word: this packet (header, payload) position + 1. */
+		word_pos += payload_size + 2;
+
+		npackets++;
+	}
+
+	otpc->npackets = npackets;
+
+	return 0;
+}
+
+static struct nvmem_config mchp_nvmem_config = {
+	.name = MCHP_OTPC_NAME,
+	.type = NVMEM_TYPE_OTP,
+	.read_only = true,
+	.word_size = 4,
+	.stride = 4,
+	.reg_read = mchp_otpc_read,
+};
+
+static int mchp_otpc_probe(struct platform_device *pdev)
+{
+	struct nvmem_device *nvmem;
+	struct mchp_otpc *otpc;
+	u32 size;
+	int ret;
+
+	otpc = devm_kzalloc(&pdev->dev, sizeof(*otpc), GFP_KERNEL);
+	if (!otpc)
+		return -ENOMEM;
+
+	otpc->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(otpc->base))
+		return PTR_ERR(otpc->base);
+
+	otpc->dev = &pdev->dev;
+	ret = mchp_otpc_init_packets_list(otpc, &size);
+	if (ret)
+		return ret;
+
+	mchp_nvmem_config.dev = otpc->dev;
+	mchp_nvmem_config.add_legacy_fixed_of_cells = true;
+	mchp_nvmem_config.size = size;
+	mchp_nvmem_config.priv = otpc;
+	nvmem = devm_nvmem_register(&pdev->dev, &mchp_nvmem_config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id __maybe_unused mchp_otpc_ids[] = {
+	{ .compatible = "microchip,sama7g5-otpc", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mchp_otpc_ids);
+
+static struct platform_driver mchp_otpc_driver = {
+	.probe = mchp_otpc_probe,
+	.driver = {
+		.name = MCHP_OTPC_NAME,
+		.of_match_table = of_match_ptr(mchp_otpc_ids),
+	},
+};
+module_platform_driver(mchp_otpc_driver);
+
+MODULE_AUTHOR("Claudiu Beznea <claudiu.beznea@microchip.com>");
+MODULE_DESCRIPTION("Microchip SAMA7G5 OTPC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/mtk-efuse.c b/drivers/nvmem/mtk-efuse.c
new file mode 100644
index 000000000..00a84ea96
--- /dev/null
+++ b/drivers/nvmem/mtk-efuse.c
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+struct mtk_efuse_pdata {
+	bool uses_post_processing;
+};
+
+struct mtk_efuse_priv {
+	void __iomem *base;
+};
+
+static int mtk_reg_read(void *context,
+			unsigned int reg, void *_val, size_t bytes)
+{
+	struct mtk_efuse_priv *priv = context;
+	void __iomem *addr = priv->base + reg;
+	u8 *val = _val;
+	int i;
+
+	for (i = 0; i < bytes; i++, val++)
+		*val = readb(addr + i);
+
+	return 0;
+}
+
+static int mtk_efuse_gpu_speedbin_pp(void *context, const char *id, int index,
+				     unsigned int offset, void *data, size_t bytes)
+{
+	u8 *val = data;
+
+	if (val[0] < 8)
+		val[0] = BIT(val[0]);
+
+	return 0;
+}
+
+static void mtk_efuse_fixup_dt_cell_info(struct nvmem_device *nvmem,
+					 struct nvmem_cell_info *cell)
+{
+	size_t sz = strlen(cell->name);
+
+	/*
+	 * On some SoCs, the GPU speedbin is not read as bitmask but as
+	 * a number with range [0-7] (max 3 bits): post process to use
+	 * it in OPP tables to describe supported-hw.
+	 */
+	if (cell->nbits <= 3 &&
+	    strncmp(cell->name, "gpu-speedbin", min(sz, strlen("gpu-speedbin"))) == 0)
+		cell->read_post_process = mtk_efuse_gpu_speedbin_pp;
+}
+
+static int mtk_efuse_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct nvmem_device *nvmem;
+	struct nvmem_config econfig = {};
+	struct mtk_efuse_priv *priv;
+	const struct mtk_efuse_pdata *pdata;
+	struct platform_device *socinfo;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	pdata = device_get_match_data(dev);
+	econfig.add_legacy_fixed_of_cells = true;
+	econfig.stride = 1;
+	econfig.word_size = 1;
+	econfig.reg_read = mtk_reg_read;
+	econfig.size = resource_size(res);
+	econfig.priv = priv;
+	econfig.dev = dev;
+	if (pdata->uses_post_processing)
+		econfig.fixup_dt_cell_info = &mtk_efuse_fixup_dt_cell_info;
+	nvmem = devm_nvmem_register(dev, &econfig);
+	if (IS_ERR(nvmem))
+		return PTR_ERR(nvmem);
+
+	socinfo = platform_device_register_data(&pdev->dev, "mtk-socinfo",
+						PLATFORM_DEVID_AUTO, NULL, 0);
+	if (IS_ERR(socinfo))
+		dev_info(dev, "MediaTek SoC Information will be unavailable\n");
+
+	platform_set_drvdata(pdev, socinfo);
+	return 0;
+}
+
+static const struct mtk_efuse_pdata mtk_mt8186_efuse_pdata = {
+	.uses_post_processing = true,
+};
+
+static const struct mtk_efuse_pdata mtk_efuse_pdata = {
+	.uses_post_processing = false,
+};
+
+static const struct of_device_id mtk_efuse_of_match[] = {
+	{ .compatible = "mediatek,mt8173-efuse", .data = &mtk_efuse_pdata },
+	{ .compatible = "mediatek,mt8186-efuse", .data = &mtk_mt8186_efuse_pdata },
+	{ .compatible = "mediatek,efuse", .data = &mtk_efuse_pdata },
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, mtk_efuse_of_match);
+
+static void mtk_efuse_remove(struct platform_device *pdev)
+{
+	struct platform_device *socinfo = platform_get_drvdata(pdev);
+
+	if (!IS_ERR_OR_NULL(socinfo))
+		platform_device_unregister(socinfo);
+}
+
+static struct platform_driver mtk_efuse_driver = {
+	.probe = mtk_efuse_probe,
+	.remove = mtk_efuse_remove,
+	.driver = {
+		.name = "mediatek,efuse",
+		.of_match_table = mtk_efuse_of_match,
+	},
+};
+
+static int __init mtk_efuse_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&mtk_efuse_driver);
+	if (ret) {
+		pr_err("Failed to register efuse driver\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void __exit mtk_efuse_exit(void)
+{
+	return platform_driver_unregister(&mtk_efuse_driver);
+}
+
+subsys_initcall(mtk_efuse_init);
+module_exit(mtk_efuse_exit);
+
+MODULE_AUTHOR("Andrew-CT Chen <andrew-ct.chen@mediatek.com>");
+MODULE_DESCRIPTION("Mediatek EFUSE driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/mxs-ocotp.c b/drivers/nvmem/mxs-ocotp.c
new file mode 100644
index 000000000..7b78f18f9
--- /dev/null
+++ b/drivers/nvmem/mxs-ocotp.c
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Freescale MXS On-Chip OTP driver
+ *
+ * Copyright (C) 2015 Stefan Wahren <stefan.wahren@i2se.com>
+ *
+ * Based on the driver from Huang Shijie and Christoph G. Baumann
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <linux/stmp_device.h>
+
+/* OCOTP registers and bits */
+
+#define BM_OCOTP_CTRL_RD_BANK_OPEN	BIT(12)
+#define BM_OCOTP_CTRL_ERROR		BIT(9)
+#define BM_OCOTP_CTRL_BUSY		BIT(8)
+
+#define OCOTP_TIMEOUT		10000
+#define OCOTP_DATA_OFFSET	0x20
+
+struct mxs_ocotp {
+	struct clk *clk;
+	void __iomem *base;
+	struct nvmem_device *nvmem;
+};
+
+static int mxs_ocotp_wait(struct mxs_ocotp *otp)
+{
+	int timeout = OCOTP_TIMEOUT;
+	unsigned int status = 0;
+
+	while (timeout--) {
+		status = readl(otp->base);
+
+		if (!(status & (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)))
+			break;
+
+		cpu_relax();
+	}
+
+	if (status & BM_OCOTP_CTRL_BUSY)
+		return -EBUSY;
+	else if (status & BM_OCOTP_CTRL_ERROR)
+		return -EIO;
+
+	return 0;
+}
+
+static int mxs_ocotp_read(void *context, unsigned int offset,
+			  void *val, size_t bytes)
+{
+	struct mxs_ocotp *otp = context;
+	u32 *buf = val;
+	int ret;
+
+	ret = clk_enable(otp->clk);
+	if (ret)
+		return ret;
+
+	writel(BM_OCOTP_CTRL_ERROR, otp->base + STMP_OFFSET_REG_CLR);
+
+	ret = mxs_ocotp_wait(otp);
+	if (ret)
+		goto disable_clk;
+
+	/* open OCOTP banks for read */
+	writel(BM_OCOTP_CTRL_RD_BANK_OPEN, otp->base + STMP_OFFSET_REG_SET);
+
+	/* approximately wait 33 hclk cycles */
+	udelay(1);
+
+	ret = mxs_ocotp_wait(otp);
+	if (ret)
+		goto close_banks;
+
+	while (bytes) {
+		if ((offset < OCOTP_DATA_OFFSET) || (offset % 16)) {
+			/* fill up non-data register */
+			*buf++ = 0;
+		} else {
+			*buf++ = readl(otp->base + offset);
+		}
+
+		bytes -= 4;
+		offset += 4;
+	}
+
+close_banks:
+	/* close banks for power saving */
+	writel(BM_OCOTP_CTRL_RD_BANK_OPEN, otp->base + STMP_OFFSET_REG_CLR);
+
+disable_clk:
+	clk_disable(otp->clk);
+
+	return ret;
+}
+
+static struct nvmem_config ocotp_config = {
+	.name = "mxs-ocotp",
+	.stride = 16,
+	.word_size = 4,
+	.reg_read = mxs_ocotp_read,
+};
+
+struct mxs_data {
+	int size;
+};
+
+static const struct mxs_data imx23_data = {
+	.size = 0x220,
+};
+
+static const struct mxs_data imx28_data = {
+	.size = 0x2a0,
+};
+
+static const struct of_device_id mxs_ocotp_match[] = {
+	{ .compatible = "fsl,imx23-ocotp", .data = &imx23_data },
+	{ .compatible = "fsl,imx28-ocotp", .data = &imx28_data },
+	{ /* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, mxs_ocotp_match);
+
+static void mxs_ocotp_action(void *data)
+{
+	clk_unprepare(data);
+}
+
+static int mxs_ocotp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct mxs_data *data;
+	struct mxs_ocotp *otp;
+	int ret;
+
+	data = device_get_match_data(dev);
+	if (!data)
+		return -EINVAL;
+
+	otp = devm_kzalloc(dev, sizeof(*otp), GFP_KERNEL);
+	if (!otp)
+		return -ENOMEM;
+
+	otp->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(otp->base))
+		return PTR_ERR(otp->base);
+
+	otp->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(otp->clk))
+		return PTR_ERR(otp->clk);
+
+	ret = clk_prepare(otp->clk);
+	if (ret < 0) {
+		dev_err(dev, "failed to prepare clk: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(&pdev->dev, mxs_ocotp_action, otp->clk);
+	if (ret)
+		return ret;
+
+	ocotp_config.size = data->size;
+	ocotp_config.priv = otp;
+	ocotp_config.dev = dev;
+	otp->nvmem = devm_nvmem_register(dev, &ocotp_config);
+	if (IS_ERR(otp->nvmem))
+		return PTR_ERR(otp->nvmem);
+
+	platform_set_drvdata(pdev, otp);
+
+	return 0;
+}
+
+static struct platform_driver mxs_ocotp_driver = {
+	.probe = mxs_ocotp_probe,
+	.driver = {
+		.name = "mxs-ocotp",
+		.of_match_table = mxs_ocotp_match,
+	},
+};
+
+module_platform_driver(mxs_ocotp_driver);
+MODULE_AUTHOR("Stefan Wahren <wahrenst@gmx.net");
+MODULE_DESCRIPTION("driver for OCOTP in i.MX23/i.MX28");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/nintendo-otp.c b/drivers/nvmem/nintendo-otp.c
new file mode 100644
index 000000000..a4d986e45
--- /dev/null
+++ b/drivers/nvmem/nintendo-otp.c
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Nintendo Wii and Wii U OTP driver
+ *
+ * This is a driver exposing the OTP of a Nintendo Wii or Wii U console.
+ *
+ * This memory contains common and per-console keys, signatures and
+ * related data required to access peripherals.
+ *
+ * Based on reversed documentation from https://wiiubrew.org/wiki/Hardware/OTP
+ *
+ * Copyright (C) 2021 Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define HW_OTPCMD  0
+#define HW_OTPDATA 4
+#define OTP_READ   0x80000000
+#define BANK_SIZE  128
+#define WORD_SIZE  4
+
+struct nintendo_otp_priv {
+	void __iomem *regs;
+};
+
+struct nintendo_otp_devtype_data {
+	const char *name;
+	unsigned int num_banks;
+};
+
+static const struct nintendo_otp_devtype_data hollywood_otp_data = {
+	.name = "wii-otp",
+	.num_banks = 1,
+};
+
+static const struct nintendo_otp_devtype_data latte_otp_data = {
+	.name = "wiiu-otp",
+	.num_banks = 8,
+};
+
+static int nintendo_otp_reg_read(void *context,
+				 unsigned int reg, void *_val, size_t bytes)
+{
+	struct nintendo_otp_priv *priv = context;
+	u32 *val = _val;
+	int words = bytes / WORD_SIZE;
+	u32 bank, addr;
+
+	while (words--) {
+		bank = (reg / BANK_SIZE) << 8;
+		addr = (reg / WORD_SIZE) % (BANK_SIZE / WORD_SIZE);
+		iowrite32be(OTP_READ | bank | addr, priv->regs + HW_OTPCMD);
+		*val++ = ioread32be(priv->regs + HW_OTPDATA);
+		reg += WORD_SIZE;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id nintendo_otp_of_table[] = {
+	{ .compatible = "nintendo,hollywood-otp", .data = &hollywood_otp_data },
+	{ .compatible = "nintendo,latte-otp", .data = &latte_otp_data },
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, nintendo_otp_of_table);
+
+static int nintendo_otp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct nintendo_otp_devtype_data *data;
+	struct nvmem_device *nvmem;
+	struct nintendo_otp_priv *priv;
+
+	struct nvmem_config config = {
+		.stride = WORD_SIZE,
+		.word_size = WORD_SIZE,
+		.reg_read = nintendo_otp_reg_read,
+		.read_only = true,
+		.root_only = true,
+	};
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->regs))
+		return PTR_ERR(priv->regs);
+
+	data = of_device_get_match_data(dev);
+	if (data) {
+		config.name = data->name;
+		config.size = data->num_banks * BANK_SIZE;
+	}
+
+	config.dev = dev;
+	config.priv = priv;
+
+	nvmem = devm_nvmem_register(dev, &config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static struct platform_driver nintendo_otp_driver = {
+	.probe = nintendo_otp_probe,
+	.driver = {
+		.name = "nintendo-otp",
+		.of_match_table = nintendo_otp_of_table,
+	},
+};
+module_platform_driver(nintendo_otp_driver);
+MODULE_AUTHOR("Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>");
+MODULE_DESCRIPTION("Nintendo Wii and Wii U OTP driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/qcom-spmi-sdam.c b/drivers/nvmem/qcom-spmi-sdam.c
new file mode 100644
index 000000000..4f1cca6ea
--- /dev/null
+++ b/drivers/nvmem/qcom-spmi-sdam.c
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017, 2020-2021, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define SDAM_MEM_START			0x40
+#define REGISTER_MAP_ID			0x40
+#define REGISTER_MAP_VERSION		0x41
+#define SDAM_SIZE			0x44
+#define SDAM_PBS_TRIG_SET		0xE5
+#define SDAM_PBS_TRIG_CLR		0xE6
+
+struct sdam_chip {
+	struct regmap			*regmap;
+	struct nvmem_config		sdam_config;
+	unsigned int			base;
+	unsigned int			size;
+};
+
+/* read only register offsets */
+static const u8 sdam_ro_map[] = {
+	REGISTER_MAP_ID,
+	REGISTER_MAP_VERSION,
+	SDAM_SIZE
+};
+
+static bool sdam_is_valid(struct sdam_chip *sdam, unsigned int offset,
+				size_t len)
+{
+	unsigned int sdam_mem_end = SDAM_MEM_START + sdam->size - 1;
+
+	if (!len)
+		return false;
+
+	if (offset >= SDAM_MEM_START && offset <= sdam_mem_end
+				&& (offset + len - 1) <= sdam_mem_end)
+		return true;
+	else if ((offset == SDAM_PBS_TRIG_SET || offset == SDAM_PBS_TRIG_CLR)
+				&& (len == 1))
+		return true;
+
+	return false;
+}
+
+static bool sdam_is_ro(unsigned int offset, size_t len)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(sdam_ro_map); i++)
+		if (offset <= sdam_ro_map[i] && (offset + len) > sdam_ro_map[i])
+			return true;
+
+	return false;
+}
+
+static int sdam_read(void *priv, unsigned int offset, void *val,
+				size_t bytes)
+{
+	struct sdam_chip *sdam = priv;
+	struct device *dev = sdam->sdam_config.dev;
+	int rc;
+
+	if (!sdam_is_valid(sdam, offset, bytes)) {
+		dev_err(dev, "Invalid SDAM offset %#x len=%zd\n",
+			offset, bytes);
+		return -EINVAL;
+	}
+
+	rc = regmap_bulk_read(sdam->regmap, sdam->base + offset, val, bytes);
+	if (rc < 0)
+		dev_err(dev, "Failed to read SDAM offset %#x len=%zd, rc=%d\n",
+						offset, bytes, rc);
+
+	return rc;
+}
+
+static int sdam_write(void *priv, unsigned int offset, void *val,
+				size_t bytes)
+{
+	struct sdam_chip *sdam = priv;
+	struct device *dev = sdam->sdam_config.dev;
+	int rc;
+
+	if (!sdam_is_valid(sdam, offset, bytes)) {
+		dev_err(dev, "Invalid SDAM offset %#x len=%zd\n",
+			offset, bytes);
+		return -EINVAL;
+	}
+
+	if (sdam_is_ro(offset, bytes)) {
+		dev_err(dev, "Invalid write offset %#x len=%zd\n",
+			offset, bytes);
+		return -EINVAL;
+	}
+
+	rc = regmap_bulk_write(sdam->regmap, sdam->base + offset, val, bytes);
+	if (rc < 0)
+		dev_err(dev, "Failed to write SDAM offset %#x len=%zd, rc=%d\n",
+						offset, bytes, rc);
+
+	return rc;
+}
+
+static int sdam_probe(struct platform_device *pdev)
+{
+	struct sdam_chip *sdam;
+	struct nvmem_device *nvmem;
+	unsigned int val;
+	int rc;
+
+	sdam = devm_kzalloc(&pdev->dev, sizeof(*sdam), GFP_KERNEL);
+	if (!sdam)
+		return -ENOMEM;
+
+	sdam->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!sdam->regmap) {
+		dev_err(&pdev->dev, "Failed to get regmap handle\n");
+		return -ENXIO;
+	}
+
+	rc = of_property_read_u32(pdev->dev.of_node, "reg", &sdam->base);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "Failed to get SDAM base, rc=%d\n", rc);
+		return -EINVAL;
+	}
+
+	rc = regmap_read(sdam->regmap, sdam->base + SDAM_SIZE, &val);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "Failed to read SDAM_SIZE rc=%d\n", rc);
+		return -EINVAL;
+	}
+	sdam->size = val * 32;
+
+	sdam->sdam_config.dev = &pdev->dev;
+	sdam->sdam_config.name = "spmi_sdam";
+	sdam->sdam_config.id = NVMEM_DEVID_AUTO;
+	sdam->sdam_config.owner = THIS_MODULE;
+	sdam->sdam_config.add_legacy_fixed_of_cells = true;
+	sdam->sdam_config.stride = 1;
+	sdam->sdam_config.size = sdam->size;
+	sdam->sdam_config.word_size = 1;
+	sdam->sdam_config.reg_read = sdam_read;
+	sdam->sdam_config.reg_write = sdam_write;
+	sdam->sdam_config.priv = sdam;
+
+	nvmem = devm_nvmem_register(&pdev->dev, &sdam->sdam_config);
+	if (IS_ERR(nvmem)) {
+		dev_err(&pdev->dev,
+			"Failed to register SDAM nvmem device rc=%ld\n",
+			PTR_ERR(nvmem));
+		return -ENXIO;
+	}
+	dev_dbg(&pdev->dev,
+		"SDAM base=%#x size=%u registered successfully\n",
+		sdam->base, sdam->size);
+
+	return 0;
+}
+
+static const struct of_device_id sdam_match_table[] = {
+	{ .compatible = "qcom,spmi-sdam" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sdam_match_table);
+
+static struct platform_driver sdam_driver = {
+	.driver = {
+		.name = "qcom,spmi-sdam",
+		.of_match_table = sdam_match_table,
+	},
+	.probe		= sdam_probe,
+};
+module_platform_driver(sdam_driver);
+
+MODULE_DESCRIPTION("QCOM SPMI SDAM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/qfprom.c b/drivers/nvmem/qfprom.c
new file mode 100644
index 000000000..1de3435df
--- /dev/null
+++ b/drivers/nvmem/qfprom.c
@@ -0,0 +1,477 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+
+/* Blow timer clock frequency in Mhz */
+#define QFPROM_BLOW_TIMER_OFFSET 0x03c
+
+/* Amount of time required to hold charge to blow fuse in micro-seconds */
+#define QFPROM_FUSE_BLOW_POLL_US	100
+#define QFPROM_FUSE_BLOW_TIMEOUT_US	10000
+
+#define QFPROM_BLOW_STATUS_OFFSET	0x048
+#define QFPROM_BLOW_STATUS_BUSY		0x1
+#define QFPROM_BLOW_STATUS_READY	0x0
+
+#define QFPROM_ACCEL_OFFSET		0x044
+
+#define QFPROM_VERSION_OFFSET		0x0
+#define QFPROM_MAJOR_VERSION_SHIFT	28
+#define QFPROM_MAJOR_VERSION_MASK	GENMASK(31, QFPROM_MAJOR_VERSION_SHIFT)
+#define QFPROM_MINOR_VERSION_SHIFT	16
+#define QFPROM_MINOR_VERSION_MASK	GENMASK(27, QFPROM_MINOR_VERSION_SHIFT)
+
+static bool read_raw_data;
+module_param(read_raw_data, bool, 0644);
+MODULE_PARM_DESC(read_raw_data, "Read raw instead of corrected data");
+
+/**
+ * struct qfprom_soc_data - config that varies from SoC to SoC.
+ *
+ * @accel_value:             Should contain qfprom accel value.
+ * @qfprom_blow_timer_value: The timer value of qfprom when doing efuse blow.
+ * @qfprom_blow_set_freq:    The frequency required to set when we start the
+ *                           fuse blowing.
+ * @qfprom_blow_uV:          LDO voltage to be set when doing efuse blow
+ */
+struct qfprom_soc_data {
+	u32 accel_value;
+	u32 qfprom_blow_timer_value;
+	u32 qfprom_blow_set_freq;
+	int qfprom_blow_uV;
+};
+
+/**
+ * struct qfprom_priv - structure holding qfprom attributes
+ *
+ * @qfpraw:       iomapped memory space for qfprom-efuse raw address space.
+ * @qfpconf:      iomapped memory space for qfprom-efuse configuration address
+ *                space.
+ * @qfpcorrected: iomapped memory space for qfprom corrected address space.
+ * @qfpsecurity:  iomapped memory space for qfprom security control space.
+ * @dev:          qfprom device structure.
+ * @secclk:       Clock supply.
+ * @vcc:          Regulator supply.
+ * @soc_data:     Data that for things that varies from SoC to SoC.
+ */
+struct qfprom_priv {
+	void __iomem *qfpraw;
+	void __iomem *qfpconf;
+	void __iomem *qfpcorrected;
+	void __iomem *qfpsecurity;
+	struct device *dev;
+	struct clk *secclk;
+	struct regulator *vcc;
+	const struct qfprom_soc_data *soc_data;
+};
+
+/**
+ * struct qfprom_touched_values - saved values to restore after blowing
+ *
+ * @clk_rate: The rate the clock was at before blowing.
+ * @accel_val: The value of the accel reg before blowing.
+ * @timer_val: The value of the timer before blowing.
+ */
+struct qfprom_touched_values {
+	unsigned long clk_rate;
+	u32 accel_val;
+	u32 timer_val;
+};
+
+/**
+ * struct qfprom_soc_compatible_data - Data matched against the SoC
+ * compatible string.
+ *
+ * @keepout: Array of keepout regions for this SoC.
+ * @nkeepout: Number of elements in the keepout array.
+ */
+struct qfprom_soc_compatible_data {
+	const struct nvmem_keepout *keepout;
+	unsigned int nkeepout;
+};
+
+static const struct nvmem_keepout sc7180_qfprom_keepout[] = {
+	{.start = 0x128, .end = 0x148},
+	{.start = 0x220, .end = 0x228}
+};
+
+static const struct qfprom_soc_compatible_data sc7180_qfprom = {
+	.keepout = sc7180_qfprom_keepout,
+	.nkeepout = ARRAY_SIZE(sc7180_qfprom_keepout)
+};
+
+static const struct nvmem_keepout sc7280_qfprom_keepout[] = {
+	{.start = 0x128, .end = 0x148},
+	{.start = 0x238, .end = 0x248}
+};
+
+static const struct qfprom_soc_compatible_data sc7280_qfprom = {
+	.keepout = sc7280_qfprom_keepout,
+	.nkeepout = ARRAY_SIZE(sc7280_qfprom_keepout)
+};
+
+/**
+ * qfprom_disable_fuse_blowing() - Undo enabling of fuse blowing.
+ * @priv: Our driver data.
+ * @old:  The data that was stashed from before fuse blowing.
+ *
+ * Resets the value of the blow timer, accel register and the clock
+ * and voltage settings.
+ *
+ * Prints messages if there are errors but doesn't return an error code
+ * since there's not much we can do upon failure.
+ */
+static void qfprom_disable_fuse_blowing(const struct qfprom_priv *priv,
+					const struct qfprom_touched_values *old)
+{
+	int ret;
+
+	writel(old->timer_val, priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
+	writel(old->accel_val, priv->qfpconf + QFPROM_ACCEL_OFFSET);
+
+	dev_pm_genpd_set_performance_state(priv->dev, 0);
+	pm_runtime_put(priv->dev);
+
+	/*
+	 * This may be a shared rail and may be able to run at a lower rate
+	 * when we're not blowing fuses.  At the moment, the regulator framework
+	 * applies voltage constraints even on disabled rails, so remove our
+	 * constraints and allow the rail to be adjusted by other users.
+	 */
+	ret = regulator_set_voltage(priv->vcc, 0, INT_MAX);
+	if (ret)
+		dev_warn(priv->dev, "Failed to set 0 voltage (ignoring)\n");
+
+	ret = regulator_disable(priv->vcc);
+	if (ret)
+		dev_warn(priv->dev, "Failed to disable regulator (ignoring)\n");
+
+	ret = clk_set_rate(priv->secclk, old->clk_rate);
+	if (ret)
+		dev_warn(priv->dev,
+			 "Failed to set clock rate for disable (ignoring)\n");
+
+	clk_disable_unprepare(priv->secclk);
+}
+
+/**
+ * qfprom_enable_fuse_blowing() - Enable fuse blowing.
+ * @priv: Our driver data.
+ * @old:  We'll stash stuff here to use when disabling.
+ *
+ * Sets the value of the blow timer, accel register and the clock
+ * and voltage settings.
+ *
+ * Prints messages if there are errors so caller doesn't need to.
+ *
+ * Return: 0 or -err.
+ */
+static int qfprom_enable_fuse_blowing(const struct qfprom_priv *priv,
+				      struct qfprom_touched_values *old)
+{
+	int ret;
+	int qfprom_blow_uV = priv->soc_data->qfprom_blow_uV;
+
+	ret = clk_prepare_enable(priv->secclk);
+	if (ret) {
+		dev_err(priv->dev, "Failed to enable clock\n");
+		return ret;
+	}
+
+	old->clk_rate = clk_get_rate(priv->secclk);
+	ret = clk_set_rate(priv->secclk, priv->soc_data->qfprom_blow_set_freq);
+	if (ret) {
+		dev_err(priv->dev, "Failed to set clock rate for enable\n");
+		goto err_clk_prepared;
+	}
+
+	/*
+	 * Hardware requires a minimum voltage for fuse blowing.
+	 * This may be a shared rail so don't specify a maximum.
+	 * Regulator constraints will cap to the actual maximum.
+	 */
+	ret = regulator_set_voltage(priv->vcc, qfprom_blow_uV, INT_MAX);
+	if (ret) {
+		dev_err(priv->dev, "Failed to set %duV\n", qfprom_blow_uV);
+		goto err_clk_rate_set;
+	}
+
+	ret = regulator_enable(priv->vcc);
+	if (ret) {
+		dev_err(priv->dev, "Failed to enable regulator\n");
+		goto err_clk_rate_set;
+	}
+
+	ret = pm_runtime_resume_and_get(priv->dev);
+	if (ret < 0) {
+		dev_err(priv->dev, "Failed to enable power-domain\n");
+		goto err_reg_enable;
+	}
+	dev_pm_genpd_set_performance_state(priv->dev, INT_MAX);
+
+	old->timer_val = readl(priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
+	old->accel_val = readl(priv->qfpconf + QFPROM_ACCEL_OFFSET);
+	writel(priv->soc_data->qfprom_blow_timer_value,
+	       priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
+	writel(priv->soc_data->accel_value,
+	       priv->qfpconf + QFPROM_ACCEL_OFFSET);
+
+	return 0;
+
+err_reg_enable:
+	regulator_disable(priv->vcc);
+err_clk_rate_set:
+	clk_set_rate(priv->secclk, old->clk_rate);
+err_clk_prepared:
+	clk_disable_unprepare(priv->secclk);
+	return ret;
+}
+
+/**
+ * qfprom_reg_write() - Write to fuses.
+ * @context: Our driver data.
+ * @reg:     The offset to write at.
+ * @_val:    Pointer to data to write.
+ * @bytes:   The number of bytes to write.
+ *
+ * Writes to fuses.  WARNING: THIS IS PERMANENT.
+ *
+ * Return: 0 or -err.
+ */
+static int qfprom_reg_write(void *context, unsigned int reg, void *_val,
+			    size_t bytes)
+{
+	struct qfprom_priv *priv = context;
+	struct qfprom_touched_values old;
+	int words = bytes / 4;
+	u32 *value = _val;
+	u32 blow_status;
+	int ret;
+	int i;
+
+	dev_dbg(priv->dev,
+		"Writing to raw qfprom region : %#010x of size: %zu\n",
+		reg, bytes);
+
+	/*
+	 * The hardware only allows us to write word at a time, but we can
+	 * read byte at a time.  Until the nvmem framework allows a separate
+	 * word_size and stride for reading vs. writing, we'll enforce here.
+	 */
+	if (bytes % 4) {
+		dev_err(priv->dev,
+			"%zu is not an integral number of words\n", bytes);
+		return -EINVAL;
+	}
+	if (reg % 4) {
+		dev_err(priv->dev,
+			"Invalid offset: %#x.  Must be word aligned\n", reg);
+		return -EINVAL;
+	}
+
+	ret = qfprom_enable_fuse_blowing(priv, &old);
+	if (ret)
+		return ret;
+
+	ret = readl_relaxed_poll_timeout(
+		priv->qfpconf + QFPROM_BLOW_STATUS_OFFSET,
+		blow_status, blow_status == QFPROM_BLOW_STATUS_READY,
+		QFPROM_FUSE_BLOW_POLL_US, QFPROM_FUSE_BLOW_TIMEOUT_US);
+
+	if (ret) {
+		dev_err(priv->dev,
+			"Timeout waiting for initial ready; aborting.\n");
+		goto exit_enabled_fuse_blowing;
+	}
+
+	for (i = 0; i < words; i++)
+		writel(value[i], priv->qfpraw + reg + (i * 4));
+
+	ret = readl_relaxed_poll_timeout(
+		priv->qfpconf + QFPROM_BLOW_STATUS_OFFSET,
+		blow_status, blow_status == QFPROM_BLOW_STATUS_READY,
+		QFPROM_FUSE_BLOW_POLL_US, QFPROM_FUSE_BLOW_TIMEOUT_US);
+
+	/* Give an error, but not much we can do in this case */
+	if (ret)
+		dev_err(priv->dev, "Timeout waiting for finish.\n");
+
+exit_enabled_fuse_blowing:
+	qfprom_disable_fuse_blowing(priv, &old);
+
+	return ret;
+}
+
+static int qfprom_reg_read(void *context,
+			unsigned int reg, void *_val, size_t bytes)
+{
+	struct qfprom_priv *priv = context;
+	u32 *val = _val;
+	void __iomem *base = priv->qfpcorrected;
+	int words = DIV_ROUND_UP(bytes, sizeof(u32));
+	int i;
+
+	if (read_raw_data && priv->qfpraw)
+		base = priv->qfpraw;
+
+	for (i = 0; i < words; i++)
+		*val++ = readl(base + reg + i * sizeof(u32));
+
+	return 0;
+}
+
+/* Align reads to word boundary */
+static void qfprom_fixup_dt_cell_info(struct nvmem_device *nvmem,
+				      struct nvmem_cell_info *cell)
+{
+	unsigned int byte_offset = cell->offset % sizeof(u32);
+
+	cell->bit_offset += byte_offset * BITS_PER_BYTE;
+	cell->offset -= byte_offset;
+	if (byte_offset && !cell->nbits)
+		cell->nbits = cell->bytes * BITS_PER_BYTE;
+}
+
+static void qfprom_runtime_disable(void *data)
+{
+	pm_runtime_disable(data);
+}
+
+static const struct qfprom_soc_data qfprom_7_8_data = {
+	.accel_value = 0xD10,
+	.qfprom_blow_timer_value = 25,
+	.qfprom_blow_set_freq = 4800000,
+	.qfprom_blow_uV = 1800000,
+};
+
+static const struct qfprom_soc_data qfprom_7_15_data = {
+	.accel_value = 0xD08,
+	.qfprom_blow_timer_value = 24,
+	.qfprom_blow_set_freq = 4800000,
+	.qfprom_blow_uV = 1900000,
+};
+
+static int qfprom_probe(struct platform_device *pdev)
+{
+	struct nvmem_config econfig = {
+		.name = "qfprom",
+		.add_legacy_fixed_of_cells = true,
+		.stride = 4,
+		.word_size = 4,
+		.id = NVMEM_DEVID_AUTO,
+		.reg_read = qfprom_reg_read,
+		.fixup_dt_cell_info = qfprom_fixup_dt_cell_info,
+	};
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct nvmem_device *nvmem;
+	const struct qfprom_soc_compatible_data *soc_data;
+	struct qfprom_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* The corrected section is always provided */
+	priv->qfpcorrected = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(priv->qfpcorrected))
+		return PTR_ERR(priv->qfpcorrected);
+
+	econfig.size = resource_size(res);
+	econfig.dev = dev;
+	econfig.priv = priv;
+
+	priv->dev = dev;
+	soc_data = device_get_match_data(dev);
+	if (soc_data) {
+		econfig.keepout = soc_data->keepout;
+		econfig.nkeepout = soc_data->nkeepout;
+	}
+
+	/*
+	 * If more than one region is provided then the OS has the ability
+	 * to write.
+	 */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (res) {
+		u32 version;
+		int major_version, minor_version;
+
+		priv->qfpraw = devm_ioremap_resource(dev, res);
+		if (IS_ERR(priv->qfpraw))
+			return PTR_ERR(priv->qfpraw);
+		priv->qfpconf = devm_platform_ioremap_resource(pdev, 2);
+		if (IS_ERR(priv->qfpconf))
+			return PTR_ERR(priv->qfpconf);
+		priv->qfpsecurity = devm_platform_ioremap_resource(pdev, 3);
+		if (IS_ERR(priv->qfpsecurity))
+			return PTR_ERR(priv->qfpsecurity);
+
+		version = readl(priv->qfpsecurity + QFPROM_VERSION_OFFSET);
+		major_version = (version & QFPROM_MAJOR_VERSION_MASK) >>
+				QFPROM_MAJOR_VERSION_SHIFT;
+		minor_version = (version & QFPROM_MINOR_VERSION_MASK) >>
+				QFPROM_MINOR_VERSION_SHIFT;
+
+		if (major_version == 7 && minor_version == 8)
+			priv->soc_data = &qfprom_7_8_data;
+		else if (major_version == 7 && minor_version == 15)
+			priv->soc_data = &qfprom_7_15_data;
+
+		priv->vcc = devm_regulator_get(&pdev->dev, "vcc");
+		if (IS_ERR(priv->vcc))
+			return PTR_ERR(priv->vcc);
+
+		priv->secclk = devm_clk_get_optional(dev, "core");
+		if (IS_ERR(priv->secclk))
+			return dev_err_probe(dev, PTR_ERR(priv->secclk), "Error getting clock\n");
+
+		/* Only enable writing if we have SoC data and a valid clock */
+		if (priv->soc_data && priv->secclk)
+			econfig.reg_write = qfprom_reg_write;
+	}
+
+	pm_runtime_enable(dev);
+	ret = devm_add_action_or_reset(dev, qfprom_runtime_disable, dev);
+	if (ret)
+		return ret;
+
+	nvmem = devm_nvmem_register(dev, &econfig);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id qfprom_of_match[] = {
+	{ .compatible = "qcom,qfprom",},
+	{ .compatible = "qcom,sc7180-qfprom", .data = &sc7180_qfprom},
+	{ .compatible = "qcom,sc7280-qfprom", .data = &sc7280_qfprom},
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, qfprom_of_match);
+
+static struct platform_driver qfprom_driver = {
+	.probe = qfprom_probe,
+	.driver = {
+		.name = "qcom,qfprom",
+		.of_match_table = qfprom_of_match,
+	},
+};
+module_platform_driver(qfprom_driver);
+MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@linaro.org>");
+MODULE_DESCRIPTION("Qualcomm QFPROM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/qnap-mcu-eeprom.c b/drivers/nvmem/qnap-mcu-eeprom.c
new file mode 100644
index 000000000..07bdaa2a3
--- /dev/null
+++ b/drivers/nvmem/qnap-mcu-eeprom.c
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ee1004 - driver for DDR4 SPD EEPROMs
+ *
+ * Copyright (C) 2017-2019 Jean Delvare
+ *
+ * Based on the at24 driver:
+ * Copyright (C) 2005-2007 David Brownell
+ * Copyright (C) 2008 Wolfram Sang, Pengutronix
+ */
+
+#include <linux/mfd/qnap-mcu.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* Determined by trial and error until read anomalies appeared */
+#define QNAP_MCU_EEPROM_SIZE		256
+#define QNAP_MCU_EEPROM_BLOCK_SIZE	32
+
+static int qnap_mcu_eeprom_read_block(struct qnap_mcu *mcu, unsigned int offset,
+				      void *val, size_t bytes)
+{
+	const u8 cmd[] = { 0xf7, 0xa1, offset, bytes };
+	u8 *reply;
+	int ret = 0;
+
+	reply = kzalloc(bytes + sizeof(cmd), GFP_KERNEL);
+	if (!reply)
+		return -ENOMEM;
+
+	ret = qnap_mcu_exec(mcu, cmd, sizeof(cmd), reply, bytes + sizeof(cmd));
+	if (ret)
+		goto out;
+
+	/* First bytes must mirror the sent command */
+	if (memcmp(cmd, reply, sizeof(cmd))) {
+		ret = -EIO;
+		goto out;
+	}
+
+	memcpy(val, reply + sizeof(cmd), bytes);
+
+out:
+	kfree(reply);
+	return ret;
+}
+
+static int qnap_mcu_eeprom_read(void *priv, unsigned int offset, void *val, size_t bytes)
+{
+	struct qnap_mcu *mcu = priv;
+	int pos = 0, ret;
+	u8 *buf = val;
+
+	if (unlikely(!bytes))
+		return 0;
+
+	while (bytes > 0) {
+		size_t to_read = (bytes > QNAP_MCU_EEPROM_BLOCK_SIZE) ?
+						QNAP_MCU_EEPROM_BLOCK_SIZE : bytes;
+
+		ret = qnap_mcu_eeprom_read_block(mcu, offset + pos, &buf[pos], to_read);
+		if (ret < 0)
+			return ret;
+
+		pos += to_read;
+		bytes -= to_read;
+	}
+
+	return 0;
+}
+
+static int qnap_mcu_eeprom_probe(struct platform_device *pdev)
+{
+	struct qnap_mcu *mcu = dev_get_drvdata(pdev->dev.parent);
+	struct nvmem_config nvcfg = {};
+	struct nvmem_device *ndev;
+
+	nvcfg.dev = &pdev->dev;
+	nvcfg.of_node = pdev->dev.parent->of_node;
+	nvcfg.name = dev_name(&pdev->dev);
+	nvcfg.id = NVMEM_DEVID_NONE;
+	nvcfg.owner = THIS_MODULE;
+	nvcfg.type = NVMEM_TYPE_EEPROM;
+	nvcfg.read_only = true;
+	nvcfg.root_only = false;
+	nvcfg.reg_read = qnap_mcu_eeprom_read;
+	nvcfg.size = QNAP_MCU_EEPROM_SIZE;
+	nvcfg.word_size = 1;
+	nvcfg.stride = 1;
+	nvcfg.priv = mcu;
+
+	ndev = devm_nvmem_register(&pdev->dev, &nvcfg);
+	if (IS_ERR(ndev))
+		return PTR_ERR(ndev);
+
+	return 0;
+}
+
+static struct platform_driver qnap_mcu_eeprom_driver = {
+	.probe = qnap_mcu_eeprom_probe,
+	.driver = {
+		.name = "qnap-mcu-eeprom",
+	},
+};
+module_platform_driver(qnap_mcu_eeprom_driver);
+
+MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
+MODULE_DESCRIPTION("QNAP MCU EEPROM driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/qoriq-efuse.c b/drivers/nvmem/qoriq-efuse.c
new file mode 100644
index 000000000..80f514939
--- /dev/null
+++ b/drivers/nvmem/qoriq-efuse.c
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2023  Westermo Network Technologies AB
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+
+struct qoriq_efuse_priv {
+	void __iomem *base;
+};
+
+static int qoriq_efuse_read(void *context, unsigned int offset, void *val,
+			    size_t bytes)
+{
+	struct qoriq_efuse_priv *priv = context;
+
+	/* .stride = 4 so offset is guaranteed to be aligned */
+	__ioread32_copy(val, priv->base + offset, bytes / 4);
+
+	/* Ignore trailing bytes (there shouldn't be any) */
+
+	return 0;
+}
+
+static int qoriq_efuse_probe(struct platform_device *pdev)
+{
+	struct nvmem_config config = {
+		.dev = &pdev->dev,
+		.read_only = true,
+		.reg_read = qoriq_efuse_read,
+		.stride = sizeof(u32),
+		.word_size = sizeof(u32),
+		.name = "qoriq_efuse_read",
+		.id = NVMEM_DEVID_AUTO,
+		.root_only = true,
+	};
+	struct qoriq_efuse_priv *priv;
+	struct nvmem_device *nvmem;
+	struct resource *res;
+
+	priv = devm_kzalloc(config.dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	config.size = resource_size(res);
+	config.priv = priv;
+	nvmem = devm_nvmem_register(config.dev, &config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id qoriq_efuse_of_match[] = {
+	{ .compatible = "fsl,t1023-sfp", },
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, qoriq_efuse_of_match);
+
+static struct platform_driver qoriq_efuse_driver = {
+	.probe = qoriq_efuse_probe,
+	.driver = {
+		.name = "qoriq-efuse",
+		.of_match_table = qoriq_efuse_of_match,
+	},
+};
+module_platform_driver(qoriq_efuse_driver);
+
+MODULE_AUTHOR("Richard Alpe <richard.alpe@bit42.se>");
+MODULE_DESCRIPTION("NXP QorIQ Security Fuse Processor (SFP) Reader");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/rave-sp-eeprom.c b/drivers/nvmem/rave-sp-eeprom.c
new file mode 100644
index 000000000..9ecf3873c
--- /dev/null
+++ b/drivers/nvmem/rave-sp-eeprom.c
@@ -0,0 +1,362 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * EEPROM driver for RAVE SP
+ *
+ * Copyright (C) 2018 Zodiac Inflight Innovations
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/mfd/rave-sp.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/sizes.h>
+
+/**
+ * enum rave_sp_eeprom_access_type - Supported types of EEPROM access
+ *
+ * @RAVE_SP_EEPROM_WRITE:	EEPROM write
+ * @RAVE_SP_EEPROM_READ:	EEPROM read
+ */
+enum rave_sp_eeprom_access_type {
+	RAVE_SP_EEPROM_WRITE = 0,
+	RAVE_SP_EEPROM_READ  = 1,
+};
+
+/**
+ * enum rave_sp_eeprom_header_size - EEPROM command header sizes
+ *
+ * @RAVE_SP_EEPROM_HEADER_SMALL: EEPROM header size for "small" devices (< 8K)
+ * @RAVE_SP_EEPROM_HEADER_BIG:	 EEPROM header size for "big" devices (> 8K)
+ */
+enum rave_sp_eeprom_header_size {
+	RAVE_SP_EEPROM_HEADER_SMALL = 4U,
+	RAVE_SP_EEPROM_HEADER_BIG   = 5U,
+};
+#define RAVE_SP_EEPROM_HEADER_MAX	RAVE_SP_EEPROM_HEADER_BIG
+
+#define	RAVE_SP_EEPROM_PAGE_SIZE	32U
+
+/**
+ * struct rave_sp_eeprom_page - RAVE SP EEPROM page
+ *
+ * @type:	Access type (see enum rave_sp_eeprom_access_type)
+ * @success:	Success flag (Success = 1, Failure = 0)
+ * @data:	Read data
+ *
+ * Note this structure corresponds to RSP_*_EEPROM payload from RAVE
+ * SP ICD
+ */
+struct rave_sp_eeprom_page {
+	u8  type;
+	u8  success;
+	u8  data[RAVE_SP_EEPROM_PAGE_SIZE];
+} __packed;
+
+/**
+ * struct rave_sp_eeprom - RAVE SP EEPROM device
+ *
+ * @sp:			Pointer to parent RAVE SP device
+ * @mutex:		Lock protecting access to EEPROM
+ * @address:		EEPROM device address
+ * @header_size:	Size of EEPROM command header for this device
+ * @dev:		Pointer to corresponding struct device used for logging
+ */
+struct rave_sp_eeprom {
+	struct rave_sp *sp;
+	struct mutex mutex;
+	u8 address;
+	unsigned int header_size;
+	struct device *dev;
+};
+
+/**
+ * rave_sp_eeprom_io - Low-level part of EEPROM page access
+ *
+ * @eeprom:	EEPROM device to write to
+ * @type:	EEPROM access type (read or write)
+ * @idx:	number of the EEPROM page
+ * @page:	Data to write or buffer to store result (via page->data)
+ *
+ * This function does all of the low-level work required to perform a
+ * EEPROM access. This includes formatting correct command payload,
+ * sending it and checking received results.
+ *
+ * Returns zero in case of success or negative error code in
+ * case of failure.
+ */
+static int rave_sp_eeprom_io(struct rave_sp_eeprom *eeprom,
+			     enum rave_sp_eeprom_access_type type,
+			     u16 idx,
+			     struct rave_sp_eeprom_page *page)
+{
+	const bool is_write = type == RAVE_SP_EEPROM_WRITE;
+	const unsigned int data_size = is_write ? sizeof(page->data) : 0;
+	const unsigned int cmd_size = eeprom->header_size + data_size;
+	const unsigned int rsp_size =
+		is_write ? sizeof(*page) - sizeof(page->data) : sizeof(*page);
+	unsigned int offset = 0;
+	u8 cmd[RAVE_SP_EEPROM_HEADER_MAX + sizeof(page->data)];
+	int ret;
+
+	if (WARN_ON(cmd_size > sizeof(cmd)))
+		return -EINVAL;
+
+	cmd[offset++] = eeprom->address;
+	cmd[offset++] = 0;
+	cmd[offset++] = type;
+	cmd[offset++] = idx;
+
+	/*
+	 * If there's still room in this command's header it means we
+	 * are talkin to EEPROM that uses 16-bit page numbers and we
+	 * have to specify index's MSB in payload as well.
+	 */
+	if (offset < eeprom->header_size)
+		cmd[offset++] = idx >> 8;
+	/*
+	 * Copy our data to write to command buffer first. In case of
+	 * a read data_size should be zero and memcpy would become a
+	 * no-op
+	 */
+	memcpy(&cmd[offset], page->data, data_size);
+
+	ret = rave_sp_exec(eeprom->sp, cmd, cmd_size, page, rsp_size);
+	if (ret)
+		return ret;
+
+	if (page->type != type)
+		return -EPROTO;
+
+	if (!page->success)
+		return -EIO;
+
+	return 0;
+}
+
+/**
+ * rave_sp_eeprom_page_access - Access single EEPROM page
+ *
+ * @eeprom:	EEPROM device to access
+ * @type:	Access type to perform (read or write)
+ * @offset:	Offset within EEPROM to access
+ * @data:	Data buffer
+ * @data_len:	Size of the data buffer
+ *
+ * This function performs a generic access to a single page or a
+ * portion thereof. Requested access MUST NOT cross the EEPROM page
+ * boundary.
+ *
+ * Returns zero in case of success or negative error code in
+ * case of failure.
+ */
+static int
+rave_sp_eeprom_page_access(struct rave_sp_eeprom *eeprom,
+			   enum rave_sp_eeprom_access_type type,
+			   unsigned int offset, u8 *data,
+			   size_t data_len)
+{
+	const unsigned int page_offset = offset % RAVE_SP_EEPROM_PAGE_SIZE;
+	const unsigned int page_nr     = offset / RAVE_SP_EEPROM_PAGE_SIZE;
+	struct rave_sp_eeprom_page page;
+	int ret;
+
+	/*
+	 * This function will not work if data access we've been asked
+	 * to do is crossing EEPROM page boundary. Normally this
+	 * should never happen and getting here would indicate a bug
+	 * in the code.
+	 */
+	if (WARN_ON(data_len > sizeof(page.data) - page_offset))
+		return -EINVAL;
+
+	if (type == RAVE_SP_EEPROM_WRITE) {
+		/*
+		 * If doing a partial write we need to do a read first
+		 * to fill the rest of the page with correct data.
+		 */
+		if (data_len < RAVE_SP_EEPROM_PAGE_SIZE) {
+			ret = rave_sp_eeprom_io(eeprom, RAVE_SP_EEPROM_READ,
+						page_nr, &page);
+			if (ret)
+				return ret;
+		}
+
+		memcpy(&page.data[page_offset], data, data_len);
+	}
+
+	ret = rave_sp_eeprom_io(eeprom, type, page_nr, &page);
+	if (ret)
+		return ret;
+
+	/*
+	 * Since we receive the result of the read via 'page.data'
+	 * buffer we need to copy that to 'data'
+	 */
+	if (type == RAVE_SP_EEPROM_READ)
+		memcpy(data, &page.data[page_offset], data_len);
+
+	return 0;
+}
+
+/**
+ * rave_sp_eeprom_access - Access EEPROM data
+ *
+ * @eeprom:	EEPROM device to access
+ * @type:	Access type to perform (read or write)
+ * @offset:	Offset within EEPROM to access
+ * @data:	Data buffer
+ * @data_len:	Size of the data buffer
+ *
+ * This function performs a generic access (either read or write) at
+ * arbitrary offset (not necessary page aligned) of arbitrary length
+ * (is not constrained by EEPROM page size).
+ *
+ * Returns zero in case of success or negative error code in case of
+ * failure.
+ */
+static int rave_sp_eeprom_access(struct rave_sp_eeprom *eeprom,
+				 enum rave_sp_eeprom_access_type type,
+				 unsigned int offset, u8 *data,
+				 unsigned int data_len)
+{
+	unsigned int residue;
+	unsigned int chunk;
+	unsigned int head;
+	int ret;
+
+	mutex_lock(&eeprom->mutex);
+
+	head    = offset % RAVE_SP_EEPROM_PAGE_SIZE;
+	residue = data_len;
+
+	do {
+		/*
+		 * First iteration, if we are doing an access that is
+		 * not 32-byte aligned, we need to access only data up
+		 * to a page boundary to avoid corssing it in
+		 * rave_sp_eeprom_page_access()
+		 */
+		if (unlikely(head)) {
+			chunk = RAVE_SP_EEPROM_PAGE_SIZE - head;
+			/*
+			 * This can only happen once per
+			 * rave_sp_eeprom_access() call, so we set
+			 * head to zero to process all the other
+			 * iterations normally.
+			 */
+			head  = 0;
+		} else {
+			chunk = RAVE_SP_EEPROM_PAGE_SIZE;
+		}
+
+		/*
+		 * We should never read more that 'residue' bytes
+		 */
+		chunk = min(chunk, residue);
+		ret = rave_sp_eeprom_page_access(eeprom, type, offset,
+						 data, chunk);
+		if (ret)
+			goto out;
+
+		residue -= chunk;
+		offset  += chunk;
+		data    += chunk;
+	} while (residue);
+out:
+	mutex_unlock(&eeprom->mutex);
+	return ret;
+}
+
+static int rave_sp_eeprom_reg_read(void *eeprom, unsigned int offset,
+				   void *val, size_t bytes)
+{
+	return rave_sp_eeprom_access(eeprom, RAVE_SP_EEPROM_READ,
+				     offset, val, bytes);
+}
+
+static int rave_sp_eeprom_reg_write(void *eeprom, unsigned int offset,
+				    void *val, size_t bytes)
+{
+	return rave_sp_eeprom_access(eeprom, RAVE_SP_EEPROM_WRITE,
+				     offset, val, bytes);
+}
+
+static int rave_sp_eeprom_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rave_sp *sp = dev_get_drvdata(dev->parent);
+	struct device_node *np = dev->of_node;
+	struct nvmem_config config = { 0 };
+	struct rave_sp_eeprom *eeprom;
+	struct nvmem_device *nvmem;
+	u32 reg[2], size;
+
+	if (of_property_read_u32_array(np, "reg", reg, ARRAY_SIZE(reg))) {
+		dev_err(dev, "Failed to parse \"reg\" property\n");
+		return -EINVAL;
+	}
+
+	size = reg[1];
+	/*
+	 * Per ICD, we have no more than 2 bytes to specify EEPROM
+	 * page.
+	 */
+	if (size > U16_MAX * RAVE_SP_EEPROM_PAGE_SIZE) {
+		dev_err(dev, "Specified size is too big\n");
+		return -EINVAL;
+	}
+
+	eeprom = devm_kzalloc(dev, sizeof(*eeprom), GFP_KERNEL);
+	if (!eeprom)
+		return -ENOMEM;
+
+	eeprom->address = reg[0];
+	eeprom->sp      = sp;
+	eeprom->dev     = dev;
+
+	if (size > SZ_8K)
+		eeprom->header_size = RAVE_SP_EEPROM_HEADER_BIG;
+	else
+		eeprom->header_size = RAVE_SP_EEPROM_HEADER_SMALL;
+
+	mutex_init(&eeprom->mutex);
+
+	config.id		= -1;
+	of_property_read_string(np, "zii,eeprom-name", &config.name);
+	config.priv		= eeprom;
+	config.dev		= dev;
+	config.add_legacy_fixed_of_cells	= true;
+	config.size		= size;
+	config.reg_read		= rave_sp_eeprom_reg_read;
+	config.reg_write	= rave_sp_eeprom_reg_write;
+	config.word_size	= 1;
+	config.stride		= 1;
+
+	nvmem = devm_nvmem_register(dev, &config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id rave_sp_eeprom_of_match[] = {
+	{ .compatible = "zii,rave-sp-eeprom" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rave_sp_eeprom_of_match);
+
+static struct platform_driver rave_sp_eeprom_driver = {
+	.probe = rave_sp_eeprom_probe,
+	.driver	= {
+		.name = KBUILD_MODNAME,
+		.of_match_table = rave_sp_eeprom_of_match,
+	},
+};
+module_platform_driver(rave_sp_eeprom_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andrey Vostrikov <andrey.vostrikov@cogentembedded.com>");
+MODULE_AUTHOR("Nikita Yushchenko <nikita.yoush@cogentembedded.com>");
+MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
+MODULE_DESCRIPTION("RAVE SP EEPROM driver");
diff --git a/drivers/nvmem/rcar-efuse.c b/drivers/nvmem/rcar-efuse.c
new file mode 100644
index 000000000..b94ff83b7
--- /dev/null
+++ b/drivers/nvmem/rcar-efuse.c
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Renesas R-Car E-FUSE/OTP Driver
+ *
+ * Copyright (C) 2024 Glider bv
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+
+struct rcar_fuse {
+	struct nvmem_keepout keepouts[2];
+	struct nvmem_device *nvmem;
+	struct device *dev;
+	void __iomem *base;
+};
+
+struct rcar_fuse_data {
+	unsigned int bank;	/* 0: PFC + E-FUSE, 1: OPT_MEM + E-FUSE */
+	unsigned int start;	/* inclusive */
+	unsigned int end;	/* exclusive */
+};
+
+static int rcar_fuse_reg_read(void *priv, unsigned int offset, void *val,
+			      size_t bytes)
+{
+	struct rcar_fuse *fuse = priv;
+	int ret;
+
+	ret = pm_runtime_resume_and_get(fuse->dev);
+	if (ret < 0)
+		return ret;
+
+	__ioread32_copy(val, fuse->base + offset, bytes / 4);
+
+	pm_runtime_put(fuse->dev);
+
+	return 0;
+}
+
+static int rcar_fuse_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct rcar_fuse_data *data = device_get_match_data(dev);
+	struct nvmem_config config = {
+		.dev = dev,
+		.name = "rcar-fuse",
+		.id = NVMEM_DEVID_NONE,
+		.owner = THIS_MODULE,
+		.type = NVMEM_TYPE_OTP,
+		.read_only = true,
+		.root_only = true,
+		.reg_read = rcar_fuse_reg_read,
+		.word_size = 4,
+		.stride = 4,
+	};
+	struct rcar_fuse *fuse;
+	struct resource *res;
+	int ret;
+
+	ret = devm_pm_runtime_enable(dev);
+	if (ret < 0)
+		return ret;
+
+	fuse = devm_kzalloc(dev, sizeof(*fuse), GFP_KERNEL);
+	if (!fuse)
+		return -ENOMEM;
+
+	fuse->base = devm_platform_get_and_ioremap_resource(pdev, data->bank,
+							    &res);
+	if (IS_ERR(fuse->base))
+		return PTR_ERR(fuse->base);
+
+	fuse->dev = dev;
+	fuse->keepouts[0].start = 0;
+	fuse->keepouts[0].end = data->start;
+	fuse->keepouts[1].start = data->end;
+	fuse->keepouts[1].end = resource_size(res);
+
+	config.keepout = fuse->keepouts;
+	config.nkeepout = ARRAY_SIZE(fuse->keepouts);
+	config.size = resource_size(res);
+	config.priv = fuse;
+
+	fuse->nvmem = devm_nvmem_register(dev, &config);
+	if (IS_ERR(fuse->nvmem))
+		return dev_err_probe(dev, PTR_ERR(fuse->nvmem),
+				     "Failed to register NVMEM device\n");
+
+	return 0;
+}
+
+static const struct rcar_fuse_data rcar_fuse_v3u = {
+	.bank = 0,
+	.start = 0x0c0,
+	.end = 0x0e8,
+};
+
+static const struct rcar_fuse_data rcar_fuse_s4 = {
+	.bank = 0,
+	.start = 0x0c0,
+	.end = 0x14c,
+};
+
+static const struct rcar_fuse_data rcar_fuse_v4h = {
+	.bank = 1,
+	.start = 0x100,
+	.end = 0x1a0,
+};
+
+static const struct rcar_fuse_data rcar_fuse_v4m = {
+	.bank = 1,
+	.start = 0x100,
+	.end = 0x110,
+};
+
+static const struct of_device_id rcar_fuse_match[] = {
+	{ .compatible = "renesas,r8a779a0-efuse", .data = &rcar_fuse_v3u },
+	{ .compatible = "renesas,r8a779f0-efuse", .data = &rcar_fuse_s4 },
+	{ .compatible = "renesas,r8a779g0-otp", .data = &rcar_fuse_v4h },
+	{ .compatible = "renesas,r8a779h0-otp", .data = &rcar_fuse_v4m },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rcar_fuse_match);
+
+static struct platform_driver rcar_fuse_driver = {
+	.probe = rcar_fuse_probe,
+	.driver = {
+		.name = "rcar_fuse",
+		.of_match_table = rcar_fuse_match,
+	},
+};
+module_platform_driver(rcar_fuse_driver);
+
+MODULE_DESCRIPTION("Renesas R-Car E-FUSE/OTP driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Geert Uytterhoeven");
diff --git a/drivers/nvmem/rmem.c b/drivers/nvmem/rmem.c
new file mode 100644
index 000000000..b39d628cb
--- /dev/null
+++ b/drivers/nvmem/rmem.c
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+ */
+
+#include <linux/crc32.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct rmem {
+	struct device *dev;
+	struct nvmem_device *nvmem;
+	struct reserved_mem *mem;
+};
+
+struct rmem_match_data {
+	int (*checksum)(struct rmem *priv);
+};
+
+struct __packed rmem_eyeq5_header {
+	u32 magic;
+	u32 version;
+	u32 size;
+};
+
+#define RMEM_EYEQ5_MAGIC	((u32)0xDABBAD00)
+
+static int rmem_read(void *context, unsigned int offset,
+		     void *val, size_t bytes)
+{
+	struct rmem *priv = context;
+	void *addr;
+
+	if ((phys_addr_t)offset + bytes > priv->mem->size)
+		return -EIO;
+
+	/*
+	 * Only map the reserved memory at this point to avoid potential rogue
+	 * kernel threads inadvertently modifying it. Based on the current
+	 * uses-cases for this driver, the performance hit isn't a concern.
+	 * Nor is likely to be, given the nature of the subsystem. Most nvmem
+	 * devices operate over slow buses to begin with.
+	 *
+	 * An alternative would be setting the memory as RO, set_memory_ro(),
+	 * but as of Dec 2020 this isn't possible on arm64.
+	 */
+	addr = memremap(priv->mem->base, priv->mem->size, MEMREMAP_WB);
+	if (!addr) {
+		dev_err(priv->dev, "Failed to remap memory region\n");
+		return -ENOMEM;
+	}
+
+	memcpy(val, addr + offset, bytes);
+
+	memunmap(addr);
+
+	return 0;
+}
+
+static int rmem_eyeq5_checksum(struct rmem *priv)
+{
+	void *buf __free(kfree) = NULL;
+	struct rmem_eyeq5_header header;
+	u32 computed_crc, *target_crc;
+	size_t data_size;
+	int ret;
+
+	ret = rmem_read(priv, 0, &header, sizeof(header));
+	if (ret)
+		return ret;
+
+	if (header.magic != RMEM_EYEQ5_MAGIC)
+		return -EINVAL;
+
+	/*
+	 * Avoid massive kmalloc() if header read is invalid;
+	 * the check would be done by the next rmem_read() anyway.
+	 */
+	if (header.size > priv->mem->size)
+		return -EINVAL;
+
+	/*
+	 *           0 +-------------------+
+	 *             | Header (12 bytes) | \
+	 *             +-------------------+ |
+	 *             |                   | | data to be CRCed
+	 *             |        ...        | |
+	 *             |                   | /
+	 *   data_size +-------------------+
+	 *             |   CRC (4 bytes)   |
+	 * header.size +-------------------+
+	 */
+
+	buf = kmalloc(header.size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = rmem_read(priv, 0, buf, header.size);
+	if (ret)
+		return ret;
+
+	data_size = header.size - sizeof(*target_crc);
+	target_crc = buf + data_size;
+	computed_crc = crc32(U32_MAX, buf, data_size) ^ U32_MAX;
+
+	if (computed_crc == *target_crc)
+		return 0;
+
+	dev_err(priv->dev,
+		"checksum failed: computed %#x, expected %#x, header (%#x, %#x, %#x)\n",
+		computed_crc, *target_crc, header.magic, header.version, header.size);
+	return -EINVAL;
+}
+
+static int rmem_probe(struct platform_device *pdev)
+{
+	struct nvmem_config config = { };
+	struct device *dev = &pdev->dev;
+	const struct rmem_match_data *match_data = device_get_match_data(dev);
+	struct reserved_mem *mem;
+	struct rmem *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->dev = dev;
+
+	mem = of_reserved_mem_lookup(dev->of_node);
+	if (!mem) {
+		dev_err(dev, "Failed to lookup reserved memory\n");
+		return -EINVAL;
+	}
+	priv->mem = mem;
+
+	config.dev = dev;
+	config.priv = priv;
+	config.name = "rmem";
+	config.id = NVMEM_DEVID_AUTO;
+	config.size = mem->size;
+	config.reg_read = rmem_read;
+
+	if (match_data && match_data->checksum) {
+		int ret = match_data->checksum(priv);
+
+		if (ret)
+			return ret;
+	}
+
+	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &config));
+}
+
+static const struct rmem_match_data rmem_eyeq5_match_data = {
+	.checksum = rmem_eyeq5_checksum,
+};
+
+static const struct of_device_id rmem_match[] = {
+	{ .compatible = "mobileye,eyeq5-bootloader-config", .data = &rmem_eyeq5_match_data },
+	{ .compatible = "nvmem-rmem", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, rmem_match);
+
+static struct platform_driver rmem_driver = {
+	.probe = rmem_probe,
+	.driver = {
+		.name = "rmem",
+		.of_match_table = rmem_match,
+	},
+};
+module_platform_driver(rmem_driver);
+
+MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de>");
+MODULE_DESCRIPTION("Reserved Memory Based nvmem Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/rockchip-efuse.c b/drivers/nvmem/rockchip-efuse.c
new file mode 100644
index 000000000..013e67136
--- /dev/null
+++ b/drivers/nvmem/rockchip-efuse.c
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Rockchip eFuse Driver
+ *
+ * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
+ * Author: Caesar Wang <wxt@rock-chips.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#define RK3288_A_SHIFT		6
+#define RK3288_A_MASK		0x3ff
+#define RK3288_PGENB		BIT(3)
+#define RK3288_LOAD		BIT(2)
+#define RK3288_STROBE		BIT(1)
+#define RK3288_CSB		BIT(0)
+
+#define RK3328_SECURE_SIZES	96
+#define RK3328_INT_STATUS	0x0018
+#define RK3328_DOUT		0x0020
+#define RK3328_AUTO_CTRL	0x0024
+#define RK3328_INT_FINISH	BIT(0)
+#define RK3328_AUTO_ENB		BIT(0)
+#define RK3328_AUTO_RD		BIT(1)
+
+#define RK3399_A_SHIFT		16
+#define RK3399_A_MASK		0x3ff
+#define RK3399_NBYTES		4
+#define RK3399_STROBSFTSEL	BIT(9)
+#define RK3399_RSB		BIT(7)
+#define RK3399_PD		BIT(5)
+#define RK3399_PGENB		BIT(3)
+#define RK3399_LOAD		BIT(2)
+#define RK3399_STROBE		BIT(1)
+#define RK3399_CSB		BIT(0)
+
+#define REG_EFUSE_CTRL		0x0000
+#define REG_EFUSE_DOUT		0x0004
+
+struct rockchip_efuse_chip {
+	struct device *dev;
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static int rockchip_rk3288_efuse_read(void *context, unsigned int offset,
+				      void *val, size_t bytes)
+{
+	struct rockchip_efuse_chip *efuse = context;
+	u8 *buf = val;
+	int ret;
+
+	ret = clk_prepare_enable(efuse->clk);
+	if (ret < 0) {
+		dev_err(efuse->dev, "failed to prepare/enable efuse clk\n");
+		return ret;
+	}
+
+	writel(RK3288_LOAD | RK3288_PGENB, efuse->base + REG_EFUSE_CTRL);
+	udelay(1);
+	while (bytes--) {
+		writel(readl(efuse->base + REG_EFUSE_CTRL) &
+			     (~(RK3288_A_MASK << RK3288_A_SHIFT)),
+			     efuse->base + REG_EFUSE_CTRL);
+		writel(readl(efuse->base + REG_EFUSE_CTRL) |
+			     ((offset++ & RK3288_A_MASK) << RK3288_A_SHIFT),
+			     efuse->base + REG_EFUSE_CTRL);
+		udelay(1);
+		writel(readl(efuse->base + REG_EFUSE_CTRL) |
+			     RK3288_STROBE, efuse->base + REG_EFUSE_CTRL);
+		udelay(1);
+		*buf++ = readb(efuse->base + REG_EFUSE_DOUT);
+		writel(readl(efuse->base + REG_EFUSE_CTRL) &
+		       (~RK3288_STROBE), efuse->base + REG_EFUSE_CTRL);
+		udelay(1);
+	}
+
+	/* Switch to standby mode */
+	writel(RK3288_PGENB | RK3288_CSB, efuse->base + REG_EFUSE_CTRL);
+
+	clk_disable_unprepare(efuse->clk);
+
+	return 0;
+}
+
+static int rockchip_rk3328_efuse_read(void *context, unsigned int offset,
+				      void *val, size_t bytes)
+{
+	struct rockchip_efuse_chip *efuse = context;
+	unsigned int addr_start, addr_end, addr_offset, addr_len;
+	u32 out_value, status;
+	u8 *buf;
+	int ret, i = 0;
+
+	ret = clk_prepare_enable(efuse->clk);
+	if (ret < 0) {
+		dev_err(efuse->dev, "failed to prepare/enable efuse clk\n");
+		return ret;
+	}
+
+	/* 128 Byte efuse, 96 Byte for secure, 32 Byte for non-secure */
+	offset += RK3328_SECURE_SIZES;
+	addr_start = rounddown(offset, RK3399_NBYTES) / RK3399_NBYTES;
+	addr_end = roundup(offset + bytes, RK3399_NBYTES) / RK3399_NBYTES;
+	addr_offset = offset % RK3399_NBYTES;
+	addr_len = addr_end - addr_start;
+
+	buf = kzalloc(array3_size(addr_len, RK3399_NBYTES, sizeof(*buf)),
+		      GFP_KERNEL);
+	if (!buf) {
+		ret = -ENOMEM;
+		goto nomem;
+	}
+
+	while (addr_len--) {
+		writel(RK3328_AUTO_RD | RK3328_AUTO_ENB |
+		       ((addr_start++ & RK3399_A_MASK) << RK3399_A_SHIFT),
+		       efuse->base + RK3328_AUTO_CTRL);
+		udelay(4);
+		status = readl(efuse->base + RK3328_INT_STATUS);
+		if (!(status & RK3328_INT_FINISH)) {
+			ret = -EIO;
+			goto err;
+		}
+		out_value = readl(efuse->base + RK3328_DOUT);
+		writel(RK3328_INT_FINISH, efuse->base + RK3328_INT_STATUS);
+
+		memcpy(&buf[i], &out_value, RK3399_NBYTES);
+		i += RK3399_NBYTES;
+	}
+
+	memcpy(val, buf + addr_offset, bytes);
+err:
+	kfree(buf);
+nomem:
+	clk_disable_unprepare(efuse->clk);
+
+	return ret;
+}
+
+static int rockchip_rk3399_efuse_read(void *context, unsigned int offset,
+				      void *val, size_t bytes)
+{
+	struct rockchip_efuse_chip *efuse = context;
+	unsigned int addr_start, addr_end, addr_offset, addr_len;
+	u32 out_value;
+	u8 *buf;
+	int ret, i = 0;
+
+	ret = clk_prepare_enable(efuse->clk);
+	if (ret < 0) {
+		dev_err(efuse->dev, "failed to prepare/enable efuse clk\n");
+		return ret;
+	}
+
+	addr_start = rounddown(offset, RK3399_NBYTES) / RK3399_NBYTES;
+	addr_end = roundup(offset + bytes, RK3399_NBYTES) / RK3399_NBYTES;
+	addr_offset = offset % RK3399_NBYTES;
+	addr_len = addr_end - addr_start;
+
+	buf = kzalloc(array3_size(addr_len, RK3399_NBYTES, sizeof(*buf)),
+		      GFP_KERNEL);
+	if (!buf) {
+		clk_disable_unprepare(efuse->clk);
+		return -ENOMEM;
+	}
+
+	writel(RK3399_LOAD | RK3399_PGENB | RK3399_STROBSFTSEL | RK3399_RSB,
+	       efuse->base + REG_EFUSE_CTRL);
+	udelay(1);
+	while (addr_len--) {
+		writel(readl(efuse->base + REG_EFUSE_CTRL) | RK3399_STROBE |
+		       ((addr_start++ & RK3399_A_MASK) << RK3399_A_SHIFT),
+		       efuse->base + REG_EFUSE_CTRL);
+		udelay(1);
+		out_value = readl(efuse->base + REG_EFUSE_DOUT);
+		writel(readl(efuse->base + REG_EFUSE_CTRL) & (~RK3399_STROBE),
+		       efuse->base + REG_EFUSE_CTRL);
+		udelay(1);
+
+		memcpy(&buf[i], &out_value, RK3399_NBYTES);
+		i += RK3399_NBYTES;
+	}
+
+	/* Switch to standby mode */
+	writel(RK3399_PD | RK3399_CSB, efuse->base + REG_EFUSE_CTRL);
+
+	memcpy(val, buf + addr_offset, bytes);
+
+	kfree(buf);
+
+	clk_disable_unprepare(efuse->clk);
+
+	return 0;
+}
+
+static struct nvmem_config econfig = {
+	.name = "rockchip-efuse",
+	.add_legacy_fixed_of_cells = true,
+	.type = NVMEM_TYPE_OTP,
+	.stride = 1,
+	.word_size = 1,
+	.read_only = true,
+};
+
+static const struct of_device_id rockchip_efuse_match[] = {
+	/* deprecated but kept around for dts binding compatibility */
+	{
+		.compatible = "rockchip,rockchip-efuse",
+		.data = (void *)&rockchip_rk3288_efuse_read,
+	},
+	{
+		.compatible = "rockchip,rk3066a-efuse",
+		.data = (void *)&rockchip_rk3288_efuse_read,
+	},
+	{
+		.compatible = "rockchip,rk3188-efuse",
+		.data = (void *)&rockchip_rk3288_efuse_read,
+	},
+	{
+		.compatible = "rockchip,rk3228-efuse",
+		.data = (void *)&rockchip_rk3288_efuse_read,
+	},
+	{
+		.compatible = "rockchip,rk3288-efuse",
+		.data = (void *)&rockchip_rk3288_efuse_read,
+	},
+	{
+		.compatible = "rockchip,rk3368-efuse",
+		.data = (void *)&rockchip_rk3288_efuse_read,
+	},
+	{
+		.compatible = "rockchip,rk3328-efuse",
+		.data = (void *)&rockchip_rk3328_efuse_read,
+	},
+	{
+		.compatible = "rockchip,rk3399-efuse",
+		.data = (void *)&rockchip_rk3399_efuse_read,
+	},
+	{ /* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, rockchip_efuse_match);
+
+static int rockchip_efuse_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct nvmem_device *nvmem;
+	struct rockchip_efuse_chip *efuse;
+	const void *data;
+	struct device *dev = &pdev->dev;
+
+	data = of_device_get_match_data(dev);
+	if (!data) {
+		dev_err(dev, "failed to get match data\n");
+		return -EINVAL;
+	}
+
+	efuse = devm_kzalloc(dev, sizeof(struct rockchip_efuse_chip),
+			     GFP_KERNEL);
+	if (!efuse)
+		return -ENOMEM;
+
+	efuse->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(efuse->base))
+		return PTR_ERR(efuse->base);
+
+	efuse->clk = devm_clk_get(dev, "pclk_efuse");
+	if (IS_ERR(efuse->clk))
+		return PTR_ERR(efuse->clk);
+
+	efuse->dev = dev;
+	if (of_property_read_u32(dev->of_node, "rockchip,efuse-size",
+				 &econfig.size))
+		econfig.size = resource_size(res);
+	econfig.reg_read = data;
+	econfig.priv = efuse;
+	econfig.dev = efuse->dev;
+	nvmem = devm_nvmem_register(dev, &econfig);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static struct platform_driver rockchip_efuse_driver = {
+	.probe = rockchip_efuse_probe,
+	.driver = {
+		.name = "rockchip-efuse",
+		.of_match_table = rockchip_efuse_match,
+	},
+};
+
+module_platform_driver(rockchip_efuse_driver);
+MODULE_DESCRIPTION("rockchip_efuse driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/rockchip-otp.c b/drivers/nvmem/rockchip-otp.c
new file mode 100644
index 000000000..2c0feb036
--- /dev/null
+++ b/drivers/nvmem/rockchip-otp.c
@@ -0,0 +1,472 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Rockchip OTP Driver
+ *
+ * Copyright (c) 2018 Rockchip Electronics Co. Ltd.
+ * Author: Finley Xiao <finley.xiao@rock-chips.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+/* OTP Register Offsets */
+#define OTPC_SBPI_CTRL			0x0020
+#define OTPC_SBPI_CMD_VALID_PRE		0x0024
+#define OTPC_SBPI_CS_VALID_PRE		0x0028
+#define OTPC_SBPI_STATUS		0x002C
+#define OTPC_USER_CTRL			0x0100
+#define OTPC_USER_ADDR			0x0104
+#define OTPC_USER_ENABLE		0x0108
+#define OTPC_USER_QP			0x0120
+#define OTPC_USER_Q			0x0124
+#define OTPC_INT_STATUS			0x0304
+#define OTPC_SBPI_CMD0_OFFSET		0x1000
+#define OTPC_SBPI_CMD1_OFFSET		0x1004
+
+/* OTP Register bits and masks */
+#define OTPC_USER_ADDR_MASK		GENMASK(31, 16)
+#define OTPC_USE_USER			BIT(0)
+#define OTPC_USE_USER_MASK		GENMASK(16, 16)
+#define OTPC_USER_FSM_ENABLE		BIT(0)
+#define OTPC_USER_FSM_ENABLE_MASK	GENMASK(16, 16)
+#define OTPC_SBPI_DONE			BIT(1)
+#define OTPC_USER_DONE			BIT(2)
+
+#define SBPI_DAP_ADDR			0x02
+#define SBPI_DAP_ADDR_SHIFT		8
+#define SBPI_DAP_ADDR_MASK		GENMASK(31, 24)
+#define SBPI_CMD_VALID_MASK		GENMASK(31, 16)
+#define SBPI_DAP_CMD_WRF		0xC0
+#define SBPI_DAP_REG_ECC		0x3A
+#define SBPI_ECC_ENABLE			0x00
+#define SBPI_ECC_DISABLE		0x09
+#define SBPI_ENABLE			BIT(0)
+#define SBPI_ENABLE_MASK		GENMASK(16, 16)
+
+#define OTPC_TIMEOUT			10000
+
+/* RK3588 Register */
+#define RK3588_OTPC_AUTO_CTRL		0x04
+#define RK3588_OTPC_AUTO_EN		0x08
+#define RK3588_OTPC_INT_ST		0x84
+#define RK3588_OTPC_DOUT0		0x20
+#define RK3588_BURST_NUM		1
+#define RK3588_BURST_SHIFT		8
+#define RK3588_ADDR_SHIFT		16
+#define RK3588_AUTO_EN			BIT(0)
+#define RK3588_RD_DONE			BIT(1)
+
+struct rockchip_data {
+	int size;
+	int read_offset;
+	int word_size;
+	const char * const *clks;
+	int num_clks;
+	nvmem_reg_read_t reg_read;
+};
+
+struct rockchip_otp {
+	struct device *dev;
+	void __iomem *base;
+	struct reset_control *rst;
+	const struct rockchip_data *data;
+	struct clk_bulk_data clks[];
+};
+
+static int rockchip_otp_reset(struct rockchip_otp *otp)
+{
+	int ret;
+
+	ret = reset_control_assert(otp->rst);
+	if (ret) {
+		dev_err(otp->dev, "failed to assert otp phy %d\n", ret);
+		return ret;
+	}
+
+	udelay(2);
+
+	ret = reset_control_deassert(otp->rst);
+	if (ret) {
+		dev_err(otp->dev, "failed to deassert otp phy %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rockchip_otp_wait_status(struct rockchip_otp *otp,
+				    unsigned int reg, u32 flag)
+{
+	u32 status = 0;
+	int ret;
+
+	ret = readl_poll_timeout_atomic(otp->base + reg, status,
+					(status & flag), 1, OTPC_TIMEOUT);
+	if (ret)
+		return ret;
+
+	/* clean int status */
+	writel(flag, otp->base + reg);
+
+	return 0;
+}
+
+static int rockchip_otp_ecc_enable(struct rockchip_otp *otp, bool enable)
+{
+	int ret = 0;
+
+	writel(SBPI_DAP_ADDR_MASK | (SBPI_DAP_ADDR << SBPI_DAP_ADDR_SHIFT),
+	       otp->base + OTPC_SBPI_CTRL);
+
+	writel(SBPI_CMD_VALID_MASK | 0x1, otp->base + OTPC_SBPI_CMD_VALID_PRE);
+	writel(SBPI_DAP_CMD_WRF | SBPI_DAP_REG_ECC,
+	       otp->base + OTPC_SBPI_CMD0_OFFSET);
+	if (enable)
+		writel(SBPI_ECC_ENABLE, otp->base + OTPC_SBPI_CMD1_OFFSET);
+	else
+		writel(SBPI_ECC_DISABLE, otp->base + OTPC_SBPI_CMD1_OFFSET);
+
+	writel(SBPI_ENABLE_MASK | SBPI_ENABLE, otp->base + OTPC_SBPI_CTRL);
+
+	ret = rockchip_otp_wait_status(otp, OTPC_INT_STATUS, OTPC_SBPI_DONE);
+	if (ret < 0)
+		dev_err(otp->dev, "timeout during ecc_enable\n");
+
+	return ret;
+}
+
+static int px30_otp_read(void *context, unsigned int offset,
+			 void *val, size_t bytes)
+{
+	struct rockchip_otp *otp = context;
+	u8 *buf = val;
+	int ret;
+
+	ret = rockchip_otp_reset(otp);
+	if (ret) {
+		dev_err(otp->dev, "failed to reset otp phy\n");
+		return ret;
+	}
+
+	ret = rockchip_otp_ecc_enable(otp, false);
+	if (ret < 0) {
+		dev_err(otp->dev, "rockchip_otp_ecc_enable err\n");
+		return ret;
+	}
+
+	writel(OTPC_USE_USER | OTPC_USE_USER_MASK, otp->base + OTPC_USER_CTRL);
+	udelay(5);
+	while (bytes--) {
+		writel(offset++ | OTPC_USER_ADDR_MASK,
+		       otp->base + OTPC_USER_ADDR);
+		writel(OTPC_USER_FSM_ENABLE | OTPC_USER_FSM_ENABLE_MASK,
+		       otp->base + OTPC_USER_ENABLE);
+		ret = rockchip_otp_wait_status(otp, OTPC_INT_STATUS, OTPC_USER_DONE);
+		if (ret < 0) {
+			dev_err(otp->dev, "timeout during read setup\n");
+			goto read_end;
+		}
+		*buf++ = readb(otp->base + OTPC_USER_Q);
+	}
+
+read_end:
+	writel(0x0 | OTPC_USE_USER_MASK, otp->base + OTPC_USER_CTRL);
+
+	return ret;
+}
+
+static int rk3568_otp_read(void *context, unsigned int offset, void *val,
+			   size_t count)
+{
+	struct rockchip_otp *otp = context;
+	u16 *buf = val;
+	u32 otp_qp;
+	int ret;
+
+	ret = rockchip_otp_reset(otp);
+	if (ret) {
+		dev_err(otp->dev, "failed to reset otp phy\n");
+		return ret;
+	}
+
+	ret = rockchip_otp_ecc_enable(otp, true);
+	if (ret) {
+		dev_err(otp->dev, "rockchip_otp_ecc_enable err\n");
+		return ret;
+	}
+
+	writel(OTPC_USE_USER | OTPC_USE_USER_MASK, otp->base + OTPC_USER_CTRL);
+	udelay(5);
+
+	while (count--) {
+		writel(offset++ | OTPC_USER_ADDR_MASK,
+		       otp->base + OTPC_USER_ADDR);
+		writel(OTPC_USER_FSM_ENABLE | OTPC_USER_FSM_ENABLE_MASK,
+		       otp->base + OTPC_USER_ENABLE);
+
+		ret = rockchip_otp_wait_status(otp, OTPC_INT_STATUS,
+					       OTPC_USER_DONE);
+		if (ret) {
+			dev_err(otp->dev, "timeout during read setup\n");
+			goto read_end;
+		}
+
+		otp_qp = readl(otp->base + OTPC_USER_QP);
+		if (((otp_qp & 0xc0) == 0xc0) || (otp_qp & 0x20)) {
+			ret = -EIO;
+			dev_err(otp->dev, "ecc check error during read setup\n");
+			goto read_end;
+		}
+
+		*buf++ = readl(otp->base + OTPC_USER_Q);
+	}
+
+read_end:
+	writel(0x0 | OTPC_USE_USER_MASK, otp->base + OTPC_USER_CTRL);
+
+	return ret;
+}
+
+static int rk3588_otp_read(void *context, unsigned int offset,
+			   void *val, size_t count)
+{
+	struct rockchip_otp *otp = context;
+	u32 *buf = val;
+	int ret;
+
+	while (count--) {
+		writel((offset++ << RK3588_ADDR_SHIFT) |
+		       (RK3588_BURST_NUM << RK3588_BURST_SHIFT),
+		       otp->base + RK3588_OTPC_AUTO_CTRL);
+		writel(RK3588_AUTO_EN, otp->base + RK3588_OTPC_AUTO_EN);
+
+		ret = rockchip_otp_wait_status(otp, RK3588_OTPC_INT_ST,
+					       RK3588_RD_DONE);
+		if (ret) {
+			dev_err(otp->dev, "timeout during read setup\n");
+			return ret;
+		}
+
+		*buf++ = readl(otp->base + RK3588_OTPC_DOUT0);
+	}
+
+	return ret;
+}
+
+static int rockchip_otp_read(void *context, unsigned int offset,
+			     void *val, size_t bytes)
+{
+	struct rockchip_otp *otp = context;
+	int ret, word_size;
+
+	if (!otp->data || !otp->data->reg_read)
+		return -EINVAL;
+
+	ret = clk_bulk_prepare_enable(otp->data->num_clks, otp->clks);
+	if (ret < 0) {
+		dev_err(otp->dev, "failed to prepare/enable clks\n");
+		return ret;
+	}
+
+	offset += otp->data->read_offset;
+	word_size = otp->data->word_size;
+
+	if (word_size > 1) {
+		unsigned int addr_start, addr_end;
+		size_t count;
+		u8 *buf;
+
+		addr_start = offset / word_size;
+		addr_end = DIV_ROUND_UP(offset + bytes, word_size);
+		count = addr_end - addr_start;
+
+		buf = kzalloc(array_size(count, word_size), GFP_KERNEL);
+		if (!buf) {
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		ret = otp->data->reg_read(context, addr_start, buf, count);
+		if (!ret)
+			memcpy(val, buf + (offset % word_size), bytes);
+
+		kfree(buf);
+	} else {
+		ret = otp->data->reg_read(context, offset, val, bytes);
+	}
+
+err:
+	clk_bulk_disable_unprepare(otp->data->num_clks, otp->clks);
+
+	return ret;
+}
+
+static struct nvmem_config otp_config = {
+	.name = "rockchip-otp",
+	.owner = THIS_MODULE,
+	.add_legacy_fixed_of_cells = true,
+	.type = NVMEM_TYPE_OTP,
+	.read_only = true,
+	.stride = 1,
+	.word_size = sizeof(u8),
+	.reg_read = rockchip_otp_read,
+};
+
+static const char * const px30_otp_clocks[] = {
+	"otp", "apb_pclk", "phy",
+};
+
+static const struct rockchip_data px30_data = {
+	.size = 0x40,
+	.clks = px30_otp_clocks,
+	.num_clks = ARRAY_SIZE(px30_otp_clocks),
+	.reg_read = px30_otp_read,
+};
+
+static const char * const rk3528_otp_clocks[] = {
+	"otp", "apb_pclk", "sbpi",
+};
+
+static const struct rockchip_data rk3528_data = {
+	.size = 0x80,
+	.word_size = sizeof(u16),
+	.clks = rk3528_otp_clocks,
+	.num_clks = ARRAY_SIZE(rk3528_otp_clocks),
+	.reg_read = rk3568_otp_read,
+};
+
+static const char * const rk3568_otp_clocks[] = {
+	"otp", "apb_pclk", "phy", "sbpi",
+};
+
+static const struct rockchip_data rk3568_data = {
+	.size = 0x80,
+	.word_size = sizeof(u16),
+	.clks = rk3568_otp_clocks,
+	.num_clks = ARRAY_SIZE(rk3568_otp_clocks),
+	.reg_read = rk3568_otp_read,
+};
+
+static const struct rockchip_data rk3576_data = {
+	.size = 0x100,
+	.read_offset = 0x700,
+	.word_size = sizeof(u32),
+	.clks = px30_otp_clocks,
+	.num_clks = ARRAY_SIZE(px30_otp_clocks),
+	.reg_read = rk3588_otp_read,
+};
+
+static const char * const rk3588_otp_clocks[] = {
+	"otp", "apb_pclk", "phy", "arb",
+};
+
+static const struct rockchip_data rk3588_data = {
+	.size = 0x400,
+	.read_offset = 0xc00,
+	.word_size = sizeof(u32),
+	.clks = rk3588_otp_clocks,
+	.num_clks = ARRAY_SIZE(rk3588_otp_clocks),
+	.reg_read = rk3588_otp_read,
+};
+
+static const struct of_device_id rockchip_otp_match[] = {
+	{
+		.compatible = "rockchip,px30-otp",
+		.data = &px30_data,
+	},
+	{
+		.compatible = "rockchip,rk3308-otp",
+		.data = &px30_data,
+	},
+	{
+		.compatible = "rockchip,rk3528-otp",
+		.data = &rk3528_data,
+	},
+	{
+		.compatible = "rockchip,rk3562-otp",
+		.data = &rk3568_data,
+	},
+	{
+		.compatible = "rockchip,rk3568-otp",
+		.data = &rk3568_data,
+	},
+	{
+		.compatible = "rockchip,rk3576-otp",
+		.data = &rk3576_data,
+	},
+	{
+		.compatible = "rockchip,rk3588-otp",
+		.data = &rk3588_data,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, rockchip_otp_match);
+
+static int rockchip_otp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rockchip_otp *otp;
+	const struct rockchip_data *data;
+	struct nvmem_device *nvmem;
+	int ret, i;
+
+	data = of_device_get_match_data(dev);
+	if (!data)
+		return dev_err_probe(dev, -EINVAL, "failed to get match data\n");
+
+	otp = devm_kzalloc(&pdev->dev, struct_size(otp, clks, data->num_clks),
+			   GFP_KERNEL);
+	if (!otp)
+		return -ENOMEM;
+
+	otp->data = data;
+	otp->dev = dev;
+	otp->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(otp->base))
+		return dev_err_probe(dev, PTR_ERR(otp->base),
+				     "failed to ioremap resource\n");
+
+	for (i = 0; i < data->num_clks; ++i)
+		otp->clks[i].id = data->clks[i];
+
+	ret = devm_clk_bulk_get(dev, data->num_clks, otp->clks);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to get clocks\n");
+
+	otp->rst = devm_reset_control_array_get_exclusive(dev);
+	if (IS_ERR(otp->rst))
+		return dev_err_probe(dev, PTR_ERR(otp->rst),
+				     "failed to get resets\n");
+
+	otp_config.size = data->size;
+	otp_config.priv = otp;
+	otp_config.dev = dev;
+
+	nvmem = devm_nvmem_register(dev, &otp_config);
+	if (IS_ERR(nvmem))
+		return dev_err_probe(dev, PTR_ERR(nvmem),
+				     "failed to register nvmem device\n");
+	return 0;
+}
+
+static struct platform_driver rockchip_otp_driver = {
+	.probe = rockchip_otp_probe,
+	.driver = {
+		.name = "rockchip-otp",
+		.of_match_table = rockchip_otp_match,
+	},
+};
+
+module_platform_driver(rockchip_otp_driver);
+MODULE_DESCRIPTION("Rockchip OTP driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/s32g-ocotp-nvmem.c b/drivers/nvmem/s32g-ocotp-nvmem.c
new file mode 100644
index 000000000..119871ab3
--- /dev/null
+++ b/drivers/nvmem/s32g-ocotp-nvmem.c
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2023-2025 NXP
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+struct s32g_ocotp_priv {
+	struct device *dev;
+	void __iomem *base;
+};
+
+static int s32g_ocotp_read(void *context, unsigned int offset,
+			    void *val, size_t bytes)
+{
+	struct s32g_ocotp_priv *s32g_data = context;
+	u32 *dst = val;
+
+	while (bytes >= sizeof(u32)) {
+		*dst++ = ioread32(s32g_data->base + offset);
+
+		bytes -= sizeof(u32);
+		offset += sizeof(u32);
+	}
+
+	return 0;
+}
+
+static struct nvmem_keepout s32g_keepouts[] = {
+	{ .start = 0,   .end = 520 },
+	{ .start = 540, .end = 564 },
+	{ .start = 596, .end = 664 },
+	{ .start = 668, .end = 676 },
+	{ .start = 684, .end = 732 },
+	{ .start = 744, .end = 864 },
+	{ .start = 908, .end = 924 },
+	{ .start = 928, .end = 936 },
+	{ .start = 948, .end = 964 },
+	{ .start = 968, .end = 976 },
+	{ .start = 984, .end = 1012 },
+};
+
+static struct nvmem_config s32g_ocotp_nvmem_config = {
+	.name = "s32g-ocotp",
+	.add_legacy_fixed_of_cells = true,
+	.read_only = true,
+	.word_size = 4,
+	.reg_read = s32g_ocotp_read,
+	.keepout = s32g_keepouts,
+	.nkeepout = ARRAY_SIZE(s32g_keepouts),
+};
+
+static const struct of_device_id ocotp_of_match[] = {
+	{ .compatible = "nxp,s32g2-ocotp" },
+	{ /* sentinel */ }
+};
+
+static int s32g_ocotp_probe(struct platform_device *pdev)
+{
+	struct s32g_ocotp_priv *s32g_data;
+	struct device *dev = &pdev->dev;
+	struct nvmem_device *nvmem;
+	struct resource *res;
+
+	s32g_data = devm_kzalloc(dev, sizeof(*s32g_data), GFP_KERNEL);
+	if (!s32g_data)
+		return -ENOMEM;
+
+	s32g_data->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(s32g_data->base))
+		return dev_err_probe(dev, PTR_ERR(s32g_data->base),
+				     "Cannot map OCOTP device.\n");
+
+	s32g_data->dev = dev;
+	s32g_ocotp_nvmem_config.dev = dev;
+	s32g_ocotp_nvmem_config.priv = s32g_data;
+	s32g_ocotp_nvmem_config.size = resource_size(res);
+
+	nvmem = devm_nvmem_register(dev, &s32g_ocotp_nvmem_config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static struct platform_driver s32g_ocotp_driver = {
+	.probe = s32g_ocotp_probe,
+	.driver = {
+		.name = "s32g-ocotp",
+		.of_match_table = ocotp_of_match,
+	},
+};
+module_platform_driver(s32g_ocotp_driver);
+MODULE_AUTHOR("NXP");
+MODULE_DESCRIPTION("S32G OCOTP driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/sc27xx-efuse.c b/drivers/nvmem/sc27xx-efuse.c
new file mode 100644
index 000000000..4e2ffefac
--- /dev/null
+++ b/drivers/nvmem/sc27xx-efuse.c
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Spreadtrum Communications Inc.
+
+#include <linux/hwspinlock.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/nvmem-provider.h>
+
+/* PMIC global registers definition */
+#define SC27XX_MODULE_EN		0xc08
+#define SC2730_MODULE_EN		0x1808
+#define SC27XX_EFUSE_EN			BIT(6)
+
+/* Efuse controller registers definition */
+#define SC27XX_EFUSE_GLB_CTRL		0x0
+#define SC27XX_EFUSE_DATA_RD		0x4
+#define SC27XX_EFUSE_DATA_WR		0x8
+#define SC27XX_EFUSE_BLOCK_INDEX	0xc
+#define SC27XX_EFUSE_MODE_CTRL		0x10
+#define SC27XX_EFUSE_STATUS		0x14
+#define SC27XX_EFUSE_WR_TIMING_CTRL	0x20
+#define SC27XX_EFUSE_RD_TIMING_CTRL	0x24
+#define SC27XX_EFUSE_EFUSE_DEB_CTRL	0x28
+
+/* Mask definition for SC27XX_EFUSE_BLOCK_INDEX register */
+#define SC27XX_EFUSE_BLOCK_MASK		GENMASK(4, 0)
+
+/* Bits definitions for SC27XX_EFUSE_MODE_CTRL register */
+#define SC27XX_EFUSE_PG_START		BIT(0)
+#define SC27XX_EFUSE_RD_START		BIT(1)
+#define SC27XX_EFUSE_CLR_RDDONE		BIT(2)
+
+/* Bits definitions for SC27XX_EFUSE_STATUS register */
+#define SC27XX_EFUSE_PGM_BUSY		BIT(0)
+#define SC27XX_EFUSE_READ_BUSY		BIT(1)
+#define SC27XX_EFUSE_STANDBY		BIT(2)
+#define SC27XX_EFUSE_GLOBAL_PROT	BIT(3)
+#define SC27XX_EFUSE_RD_DONE		BIT(4)
+
+/* Block number and block width (bytes) definitions */
+#define SC27XX_EFUSE_BLOCK_MAX		32
+#define SC27XX_EFUSE_BLOCK_WIDTH	2
+
+/* Timeout (ms) for the trylock of hardware spinlocks */
+#define SC27XX_EFUSE_HWLOCK_TIMEOUT	5000
+
+/* Timeout (us) of polling the status */
+#define SC27XX_EFUSE_POLL_TIMEOUT	3000000
+#define SC27XX_EFUSE_POLL_DELAY_US	10000
+
+/*
+ * Since different PMICs of SC27xx series can have different
+ * address , we should save address in the device data structure.
+ */
+struct sc27xx_efuse_variant_data {
+	u32 module_en;
+};
+
+struct sc27xx_efuse {
+	struct device *dev;
+	struct regmap *regmap;
+	struct hwspinlock *hwlock;
+	struct mutex mutex;
+	u32 base;
+	const struct sc27xx_efuse_variant_data *var_data;
+};
+
+static const struct sc27xx_efuse_variant_data sc2731_edata = {
+	.module_en = SC27XX_MODULE_EN,
+};
+
+static const struct sc27xx_efuse_variant_data sc2730_edata = {
+	.module_en = SC2730_MODULE_EN,
+};
+
+/*
+ * On Spreadtrum platform, we have multi-subsystems will access the unique
+ * efuse controller, so we need one hardware spinlock to synchronize between
+ * the multiple subsystems.
+ */
+static int sc27xx_efuse_lock(struct sc27xx_efuse *efuse)
+{
+	int ret;
+
+	mutex_lock(&efuse->mutex);
+
+	ret = hwspin_lock_timeout_raw(efuse->hwlock,
+				      SC27XX_EFUSE_HWLOCK_TIMEOUT);
+	if (ret) {
+		dev_err(efuse->dev, "timeout to get the hwspinlock\n");
+		mutex_unlock(&efuse->mutex);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void sc27xx_efuse_unlock(struct sc27xx_efuse *efuse)
+{
+	hwspin_unlock_raw(efuse->hwlock);
+	mutex_unlock(&efuse->mutex);
+}
+
+static int sc27xx_efuse_poll_status(struct sc27xx_efuse *efuse, u32 bits)
+{
+	int ret;
+	u32 val;
+
+	ret = regmap_read_poll_timeout(efuse->regmap,
+				       efuse->base + SC27XX_EFUSE_STATUS,
+				       val, (val & bits),
+				       SC27XX_EFUSE_POLL_DELAY_US,
+				       SC27XX_EFUSE_POLL_TIMEOUT);
+	if (ret) {
+		dev_err(efuse->dev, "timeout to update the efuse status\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int sc27xx_efuse_read(void *context, u32 offset, void *val, size_t bytes)
+{
+	struct sc27xx_efuse *efuse = context;
+	u32 buf, blk_index = offset / SC27XX_EFUSE_BLOCK_WIDTH;
+	u32 blk_offset = (offset % SC27XX_EFUSE_BLOCK_WIDTH) * BITS_PER_BYTE;
+	int ret;
+
+	if (blk_index > SC27XX_EFUSE_BLOCK_MAX ||
+	    bytes > SC27XX_EFUSE_BLOCK_WIDTH)
+		return -EINVAL;
+
+	ret = sc27xx_efuse_lock(efuse);
+	if (ret)
+		return ret;
+
+	/* Enable the efuse controller. */
+	ret = regmap_update_bits(efuse->regmap, efuse->var_data->module_en,
+				 SC27XX_EFUSE_EN, SC27XX_EFUSE_EN);
+	if (ret)
+		goto unlock_efuse;
+
+	/*
+	 * Before reading, we should ensure the efuse controller is in
+	 * standby state.
+	 */
+	ret = sc27xx_efuse_poll_status(efuse, SC27XX_EFUSE_STANDBY);
+	if (ret)
+		goto disable_efuse;
+
+	/* Set the block address to be read. */
+	ret = regmap_write(efuse->regmap,
+			   efuse->base + SC27XX_EFUSE_BLOCK_INDEX,
+			   blk_index & SC27XX_EFUSE_BLOCK_MASK);
+	if (ret)
+		goto disable_efuse;
+
+	/* Start reading process from efuse memory. */
+	ret = regmap_update_bits(efuse->regmap,
+				 efuse->base + SC27XX_EFUSE_MODE_CTRL,
+				 SC27XX_EFUSE_RD_START,
+				 SC27XX_EFUSE_RD_START);
+	if (ret)
+		goto disable_efuse;
+
+	/*
+	 * Polling the read done status to make sure the reading process
+	 * is completed, that means the data can be read out now.
+	 */
+	ret = sc27xx_efuse_poll_status(efuse, SC27XX_EFUSE_RD_DONE);
+	if (ret)
+		goto disable_efuse;
+
+	/* Read data from efuse memory. */
+	ret = regmap_read(efuse->regmap, efuse->base + SC27XX_EFUSE_DATA_RD,
+			  &buf);
+	if (ret)
+		goto disable_efuse;
+
+	/* Clear the read done flag. */
+	ret = regmap_update_bits(efuse->regmap,
+				 efuse->base + SC27XX_EFUSE_MODE_CTRL,
+				 SC27XX_EFUSE_CLR_RDDONE,
+				 SC27XX_EFUSE_CLR_RDDONE);
+
+disable_efuse:
+	/* Disable the efuse controller after reading. */
+	regmap_update_bits(efuse->regmap, efuse->var_data->module_en, SC27XX_EFUSE_EN, 0);
+unlock_efuse:
+	sc27xx_efuse_unlock(efuse);
+
+	if (!ret) {
+		buf >>= blk_offset;
+		memcpy(val, &buf, bytes);
+	}
+
+	return ret;
+}
+
+static int sc27xx_efuse_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct nvmem_config econfig = { };
+	struct nvmem_device *nvmem;
+	struct sc27xx_efuse *efuse;
+	int ret;
+
+	efuse = devm_kzalloc(&pdev->dev, sizeof(*efuse), GFP_KERNEL);
+	if (!efuse)
+		return -ENOMEM;
+
+	efuse->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!efuse->regmap) {
+		dev_err(&pdev->dev, "failed to get efuse regmap\n");
+		return -ENODEV;
+	}
+
+	ret = of_property_read_u32(np, "reg", &efuse->base);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to get efuse base address\n");
+		return ret;
+	}
+
+	ret = of_hwspin_lock_get_id(np, 0);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to get hwspinlock id\n");
+		return ret;
+	}
+
+	efuse->hwlock = devm_hwspin_lock_request_specific(&pdev->dev, ret);
+	if (!efuse->hwlock) {
+		dev_err(&pdev->dev, "failed to request hwspinlock\n");
+		return -ENXIO;
+	}
+
+	mutex_init(&efuse->mutex);
+	efuse->dev = &pdev->dev;
+	efuse->var_data = of_device_get_match_data(&pdev->dev);
+
+	econfig.stride = 1;
+	econfig.word_size = 1;
+	econfig.read_only = true;
+	econfig.name = "sc27xx-efuse";
+	econfig.size = SC27XX_EFUSE_BLOCK_MAX * SC27XX_EFUSE_BLOCK_WIDTH;
+	econfig.reg_read = sc27xx_efuse_read;
+	econfig.priv = efuse;
+	econfig.dev = &pdev->dev;
+	econfig.add_legacy_fixed_of_cells = true;
+	nvmem = devm_nvmem_register(&pdev->dev, &econfig);
+	if (IS_ERR(nvmem)) {
+		dev_err(&pdev->dev, "failed to register nvmem config\n");
+		return PTR_ERR(nvmem);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id sc27xx_efuse_of_match[] = {
+	{ .compatible = "sprd,sc2731-efuse", .data = &sc2731_edata},
+	{ .compatible = "sprd,sc2730-efuse", .data = &sc2730_edata},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sc27xx_efuse_of_match);
+
+static struct platform_driver sc27xx_efuse_driver = {
+	.probe = sc27xx_efuse_probe,
+	.driver = {
+		.name = "sc27xx-efuse",
+		.of_match_table = sc27xx_efuse_of_match,
+	},
+};
+
+module_platform_driver(sc27xx_efuse_driver);
+
+MODULE_AUTHOR("Freeman Liu <freeman.liu@spreadtrum.com>");
+MODULE_DESCRIPTION("Spreadtrum SC27xx efuse driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/sec-qfprom.c b/drivers/nvmem/sec-qfprom.c
new file mode 100644
index 000000000..51d21e65a
--- /dev/null
+++ b/drivers/nvmem/sec-qfprom.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/firmware/qcom/qcom_scm.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+/**
+ * struct sec_qfprom - structure holding secure qfprom attributes
+ *
+ * @base: starting physical address for secure qfprom corrected address space.
+ * @dev: qfprom device structure.
+ */
+struct sec_qfprom {
+	phys_addr_t base;
+	struct device *dev;
+};
+
+static int sec_qfprom_reg_read(void *context, unsigned int reg, void *_val, size_t bytes)
+{
+	struct sec_qfprom *priv = context;
+	unsigned int i;
+	u8 *val = _val;
+	u32 read_val;
+	u8 *tmp;
+
+	for (i = 0; i < bytes; i++, reg++) {
+		if (i == 0 || reg % 4 == 0) {
+			if (qcom_scm_io_readl(priv->base + (reg & ~3), &read_val)) {
+				dev_err(priv->dev, "Couldn't access fuse register\n");
+				return -EINVAL;
+			}
+			tmp = (u8 *)&read_val;
+		}
+
+		val[i] = tmp[reg & 3];
+	}
+
+	return 0;
+}
+
+static int sec_qfprom_probe(struct platform_device *pdev)
+{
+	struct nvmem_config econfig = {
+		.name = "sec-qfprom",
+		.add_legacy_fixed_of_cells = true,
+		.stride = 1,
+		.word_size = 1,
+		.id = NVMEM_DEVID_AUTO,
+		.reg_read = sec_qfprom_reg_read,
+	};
+	struct device *dev = &pdev->dev;
+	struct nvmem_device *nvmem;
+	struct sec_qfprom *priv;
+	struct resource *res;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
+
+	priv->base = res->start;
+
+	econfig.size = resource_size(res);
+	econfig.dev = dev;
+	econfig.priv = priv;
+
+	priv->dev = dev;
+
+	nvmem = devm_nvmem_register(dev, &econfig);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id sec_qfprom_of_match[] = {
+	{ .compatible = "qcom,sec-qfprom" },
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, sec_qfprom_of_match);
+
+static struct platform_driver qfprom_driver = {
+	.probe = sec_qfprom_probe,
+	.driver = {
+		.name = "qcom_sec_qfprom",
+		.of_match_table = sec_qfprom_of_match,
+	},
+};
+module_platform_driver(qfprom_driver);
+MODULE_DESCRIPTION("Qualcomm Secure QFPROM driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/snvs_lpgpr.c b/drivers/nvmem/snvs_lpgpr.c
new file mode 100644
index 000000000..89c271123
--- /dev/null
+++ b/drivers/nvmem/snvs_lpgpr.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015 Pengutronix, Steffen Trumtrar <kernel@pengutronix.de>
+ * Copyright (c) 2017 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define IMX6Q_SNVS_HPLR		0x00
+#define IMX6Q_SNVS_LPLR		0x34
+#define IMX6Q_SNVS_LPGPR	0x68
+
+#define IMX7D_SNVS_HPLR		0x00
+#define IMX7D_SNVS_LPLR		0x34
+#define IMX7D_SNVS_LPGPR	0x90
+
+#define IMX_GPR_SL		BIT(5)
+#define IMX_GPR_HL		BIT(5)
+
+struct snvs_lpgpr_cfg {
+	int offset;
+	int offset_hplr;
+	int offset_lplr;
+	int size;
+};
+
+struct snvs_lpgpr_priv {
+	struct device_d			*dev;
+	struct regmap			*regmap;
+	struct nvmem_config		cfg;
+	const struct snvs_lpgpr_cfg	*dcfg;
+};
+
+static const struct snvs_lpgpr_cfg snvs_lpgpr_cfg_imx6q = {
+	.offset		= IMX6Q_SNVS_LPGPR,
+	.offset_hplr	= IMX6Q_SNVS_HPLR,
+	.offset_lplr	= IMX6Q_SNVS_LPLR,
+	.size		= 4,
+};
+
+static const struct snvs_lpgpr_cfg snvs_lpgpr_cfg_imx7d = {
+	.offset		= IMX7D_SNVS_LPGPR,
+	.offset_hplr	= IMX7D_SNVS_HPLR,
+	.offset_lplr	= IMX7D_SNVS_LPLR,
+	.size		= 16,
+};
+
+static int snvs_lpgpr_write(void *context, unsigned int offset, void *val,
+			    size_t bytes)
+{
+	struct snvs_lpgpr_priv *priv = context;
+	const struct snvs_lpgpr_cfg *dcfg = priv->dcfg;
+	unsigned int lock_reg;
+	int ret;
+
+	ret = regmap_read(priv->regmap, dcfg->offset_hplr, &lock_reg);
+	if (ret < 0)
+		return ret;
+
+	if (lock_reg & IMX_GPR_SL)
+		return -EPERM;
+
+	ret = regmap_read(priv->regmap, dcfg->offset_lplr, &lock_reg);
+	if (ret < 0)
+		return ret;
+
+	if (lock_reg & IMX_GPR_HL)
+		return -EPERM;
+
+	return regmap_bulk_write(priv->regmap, dcfg->offset + offset, val,
+				bytes / 4);
+}
+
+static int snvs_lpgpr_read(void *context, unsigned int offset, void *val,
+			   size_t bytes)
+{
+	struct snvs_lpgpr_priv *priv = context;
+	const struct snvs_lpgpr_cfg *dcfg = priv->dcfg;
+
+	return regmap_bulk_read(priv->regmap, dcfg->offset + offset,
+			       val, bytes / 4);
+}
+
+static int snvs_lpgpr_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	struct device_node *syscon_node;
+	struct snvs_lpgpr_priv *priv;
+	struct nvmem_config *cfg;
+	struct nvmem_device *nvmem;
+	const struct snvs_lpgpr_cfg *dcfg;
+
+	if (!node)
+		return -ENOENT;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dcfg = of_device_get_match_data(dev);
+	if (!dcfg)
+		return -EINVAL;
+
+	syscon_node = of_get_parent(node);
+	if (!syscon_node)
+		return -ENODEV;
+
+	priv->regmap = syscon_node_to_regmap(syscon_node);
+	of_node_put(syscon_node);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->dcfg = dcfg;
+
+	cfg = &priv->cfg;
+	cfg->priv = priv;
+	cfg->name = dev_name(dev);
+	cfg->dev = dev;
+	cfg->stride = 4;
+	cfg->word_size = 4;
+	cfg->size = dcfg->size;
+	cfg->owner = THIS_MODULE;
+	cfg->reg_read  = snvs_lpgpr_read;
+	cfg->reg_write = snvs_lpgpr_write;
+
+	nvmem = devm_nvmem_register(dev, cfg);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id snvs_lpgpr_dt_ids[] = {
+	{ .compatible = "fsl,imx6q-snvs-lpgpr", .data = &snvs_lpgpr_cfg_imx6q },
+	{ .compatible = "fsl,imx6ul-snvs-lpgpr",
+	  .data = &snvs_lpgpr_cfg_imx6q },
+	{ .compatible = "fsl,imx7d-snvs-lpgpr",	.data = &snvs_lpgpr_cfg_imx7d },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, snvs_lpgpr_dt_ids);
+
+static struct platform_driver snvs_lpgpr_driver = {
+	.probe	= snvs_lpgpr_probe,
+	.driver = {
+		.name	= "snvs_lpgpr",
+		.of_match_table = snvs_lpgpr_dt_ids,
+	},
+};
+module_platform_driver(snvs_lpgpr_driver);
+
+MODULE_AUTHOR("Oleksij Rempel <o.rempel@pengutronix.de>");
+MODULE_DESCRIPTION("Low Power General Purpose Register in i.MX6 and i.MX7 Secure Non-Volatile Storage");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/sprd-efuse.c b/drivers/nvmem/sprd-efuse.c
new file mode 100644
index 000000000..1a7e4e5d8
--- /dev/null
+++ b/drivers/nvmem/sprd-efuse.c
@@ -0,0 +1,443 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2019 Spreadtrum Communications Inc.
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/hwspinlock.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define SPRD_EFUSE_ENABLE		0x20
+#define SPRD_EFUSE_ERR_FLAG		0x24
+#define SPRD_EFUSE_ERR_CLR		0x28
+#define SPRD_EFUSE_MAGIC_NUM		0x2c
+#define SPRD_EFUSE_FW_CFG		0x50
+#define SPRD_EFUSE_PW_SWT		0x54
+#define SPRD_EFUSE_MEM(val)		(0x1000 + ((val) << 2))
+
+#define SPRD_EFUSE_VDD_EN		BIT(0)
+#define SPRD_EFUSE_AUTO_CHECK_EN	BIT(1)
+#define SPRD_EFUSE_DOUBLE_EN		BIT(2)
+#define SPRD_EFUSE_MARGIN_RD_EN		BIT(3)
+#define SPRD_EFUSE_LOCK_WR_EN		BIT(4)
+
+#define SPRD_EFUSE_ERR_CLR_MASK		GENMASK(13, 0)
+
+#define SPRD_EFUSE_ENK1_ON		BIT(0)
+#define SPRD_EFUSE_ENK2_ON		BIT(1)
+#define SPRD_EFUSE_PROG_EN		BIT(2)
+
+#define SPRD_EFUSE_MAGIC_NUMBER		0x8810
+
+/* Block width (bytes) definitions */
+#define SPRD_EFUSE_BLOCK_WIDTH		4
+
+/*
+ * The Spreadtrum AP efuse contains 2 parts: normal efuse and secure efuse,
+ * and we can only access the normal efuse in kernel. So define the normal
+ * block offset index and normal block numbers.
+ */
+#define SPRD_EFUSE_NORMAL_BLOCK_NUMS	24
+#define SPRD_EFUSE_NORMAL_BLOCK_OFFSET	72
+
+/* Timeout (ms) for the trylock of hardware spinlocks */
+#define SPRD_EFUSE_HWLOCK_TIMEOUT	5000
+
+/*
+ * Since different Spreadtrum SoC chip can have different normal block numbers
+ * and offset. And some SoC can support block double feature, which means
+ * when reading or writing data to efuse memory, the controller can save double
+ * data in case one data become incorrect after a long period.
+ *
+ * Thus we should save them in the device data structure.
+ */
+struct sprd_efuse_variant_data {
+	u32 blk_nums;
+	u32 blk_offset;
+	bool blk_double;
+};
+
+struct sprd_efuse {
+	struct device *dev;
+	struct clk *clk;
+	struct hwspinlock *hwlock;
+	struct mutex mutex;
+	void __iomem *base;
+	const struct sprd_efuse_variant_data *data;
+};
+
+static const struct sprd_efuse_variant_data ums312_data = {
+	.blk_nums = SPRD_EFUSE_NORMAL_BLOCK_NUMS,
+	.blk_offset = SPRD_EFUSE_NORMAL_BLOCK_OFFSET,
+	.blk_double = false,
+};
+
+/*
+ * On Spreadtrum platform, we have multi-subsystems will access the unique
+ * efuse controller, so we need one hardware spinlock to synchronize between
+ * the multiple subsystems.
+ */
+static int sprd_efuse_lock(struct sprd_efuse *efuse)
+{
+	int ret;
+
+	mutex_lock(&efuse->mutex);
+
+	ret = hwspin_lock_timeout_raw(efuse->hwlock,
+				      SPRD_EFUSE_HWLOCK_TIMEOUT);
+	if (ret) {
+		dev_err(efuse->dev, "timeout get the hwspinlock\n");
+		mutex_unlock(&efuse->mutex);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void sprd_efuse_unlock(struct sprd_efuse *efuse)
+{
+	hwspin_unlock_raw(efuse->hwlock);
+	mutex_unlock(&efuse->mutex);
+}
+
+static void sprd_efuse_set_prog_power(struct sprd_efuse *efuse, bool en)
+{
+	u32 val = readl(efuse->base + SPRD_EFUSE_PW_SWT);
+
+	if (en)
+		val &= ~SPRD_EFUSE_ENK2_ON;
+	else
+		val &= ~SPRD_EFUSE_ENK1_ON;
+
+	writel(val, efuse->base + SPRD_EFUSE_PW_SWT);
+
+	/* Open or close efuse power need wait 1000us to make power stable. */
+	usleep_range(1000, 1200);
+
+	if (en)
+		val |= SPRD_EFUSE_ENK1_ON;
+	else
+		val |= SPRD_EFUSE_ENK2_ON;
+
+	writel(val, efuse->base + SPRD_EFUSE_PW_SWT);
+
+	/* Open or close efuse power need wait 1000us to make power stable. */
+	usleep_range(1000, 1200);
+}
+
+static void sprd_efuse_set_read_power(struct sprd_efuse *efuse, bool en)
+{
+	u32 val = readl(efuse->base + SPRD_EFUSE_ENABLE);
+
+	if (en)
+		val |= SPRD_EFUSE_VDD_EN;
+	else
+		val &= ~SPRD_EFUSE_VDD_EN;
+
+	writel(val, efuse->base + SPRD_EFUSE_ENABLE);
+
+	/* Open or close efuse power need wait 1000us to make power stable. */
+	usleep_range(1000, 1200);
+}
+
+static void sprd_efuse_set_prog_lock(struct sprd_efuse *efuse, bool en)
+{
+	u32 val = readl(efuse->base + SPRD_EFUSE_ENABLE);
+
+	if (en)
+		val |= SPRD_EFUSE_LOCK_WR_EN;
+	else
+		val &= ~SPRD_EFUSE_LOCK_WR_EN;
+
+	writel(val, efuse->base + SPRD_EFUSE_ENABLE);
+}
+
+static void sprd_efuse_set_auto_check(struct sprd_efuse *efuse, bool en)
+{
+	u32 val = readl(efuse->base + SPRD_EFUSE_ENABLE);
+
+	if (en)
+		val |= SPRD_EFUSE_AUTO_CHECK_EN;
+	else
+		val &= ~SPRD_EFUSE_AUTO_CHECK_EN;
+
+	writel(val, efuse->base + SPRD_EFUSE_ENABLE);
+}
+
+static void sprd_efuse_set_data_double(struct sprd_efuse *efuse, bool en)
+{
+	u32 val = readl(efuse->base + SPRD_EFUSE_ENABLE);
+
+	if (en)
+		val |= SPRD_EFUSE_DOUBLE_EN;
+	else
+		val &= ~SPRD_EFUSE_DOUBLE_EN;
+
+	writel(val, efuse->base + SPRD_EFUSE_ENABLE);
+}
+
+static void sprd_efuse_set_prog_en(struct sprd_efuse *efuse, bool en)
+{
+	u32 val = readl(efuse->base + SPRD_EFUSE_PW_SWT);
+
+	if (en)
+		val |= SPRD_EFUSE_PROG_EN;
+	else
+		val &= ~SPRD_EFUSE_PROG_EN;
+
+	writel(val, efuse->base + SPRD_EFUSE_PW_SWT);
+}
+
+static int sprd_efuse_raw_prog(struct sprd_efuse *efuse, u32 blk, bool doub,
+			       bool lock, u32 *data)
+{
+	u32 status;
+	int ret = 0;
+
+	/*
+	 * We need set the correct magic number before writing the efuse to
+	 * allow programming, and block other programming until we clear the
+	 * magic number.
+	 */
+	writel(SPRD_EFUSE_MAGIC_NUMBER,
+	       efuse->base + SPRD_EFUSE_MAGIC_NUM);
+
+	/*
+	 * Power on the efuse, enable programme and enable double data
+	 * if asked.
+	 */
+	sprd_efuse_set_prog_power(efuse, true);
+	sprd_efuse_set_prog_en(efuse, true);
+	sprd_efuse_set_data_double(efuse, doub);
+
+	/*
+	 * Enable the auto-check function to validate if the programming is
+	 * successful.
+	 */
+	if (lock)
+		sprd_efuse_set_auto_check(efuse, true);
+
+	writel(*data, efuse->base + SPRD_EFUSE_MEM(blk));
+
+	/* Disable auto-check and data double after programming */
+	if (lock)
+		sprd_efuse_set_auto_check(efuse, false);
+	sprd_efuse_set_data_double(efuse, false);
+
+	/*
+	 * Check the efuse error status, if the programming is successful,
+	 * we should lock this efuse block to avoid programming again.
+	 */
+	status = readl(efuse->base + SPRD_EFUSE_ERR_FLAG);
+	if (status) {
+		dev_err(efuse->dev,
+			"write error status %u of block %d\n", status, blk);
+
+		writel(SPRD_EFUSE_ERR_CLR_MASK,
+		       efuse->base + SPRD_EFUSE_ERR_CLR);
+		ret = -EBUSY;
+	} else if (lock) {
+		sprd_efuse_set_prog_lock(efuse, lock);
+		writel(0, efuse->base + SPRD_EFUSE_MEM(blk));
+		sprd_efuse_set_prog_lock(efuse, false);
+	}
+
+	sprd_efuse_set_prog_power(efuse, false);
+	writel(0, efuse->base + SPRD_EFUSE_MAGIC_NUM);
+
+	return ret;
+}
+
+static int sprd_efuse_raw_read(struct sprd_efuse *efuse, int blk, u32 *val,
+			       bool doub)
+{
+	u32 status;
+
+	/*
+	 * Need power on the efuse before reading data from efuse, and will
+	 * power off the efuse after reading process.
+	 */
+	sprd_efuse_set_read_power(efuse, true);
+
+	/* Enable double data if asked */
+	sprd_efuse_set_data_double(efuse, doub);
+
+	/* Start to read data from efuse block */
+	*val = readl(efuse->base + SPRD_EFUSE_MEM(blk));
+
+	/* Disable double data */
+	sprd_efuse_set_data_double(efuse, false);
+
+	/* Power off the efuse */
+	sprd_efuse_set_read_power(efuse, false);
+
+	/*
+	 * Check the efuse error status and clear them if there are some
+	 * errors occurred.
+	 */
+	status = readl(efuse->base + SPRD_EFUSE_ERR_FLAG);
+	if (status) {
+		dev_err(efuse->dev,
+			"read error status %d of block %d\n", status, blk);
+
+		writel(SPRD_EFUSE_ERR_CLR_MASK,
+		       efuse->base + SPRD_EFUSE_ERR_CLR);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static int sprd_efuse_read(void *context, u32 offset, void *val, size_t bytes)
+{
+	struct sprd_efuse *efuse = context;
+	bool blk_double = efuse->data->blk_double;
+	u32 index = offset / SPRD_EFUSE_BLOCK_WIDTH + efuse->data->blk_offset;
+	u32 blk_offset = (offset % SPRD_EFUSE_BLOCK_WIDTH) * BITS_PER_BYTE;
+	u32 data;
+	int ret;
+
+	ret = sprd_efuse_lock(efuse);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(efuse->clk);
+	if (ret)
+		goto unlock;
+
+	ret = sprd_efuse_raw_read(efuse, index, &data, blk_double);
+	if (!ret) {
+		data >>= blk_offset;
+		memcpy(val, &data, bytes);
+	}
+
+	clk_disable_unprepare(efuse->clk);
+
+unlock:
+	sprd_efuse_unlock(efuse);
+	return ret;
+}
+
+static int sprd_efuse_write(void *context, u32 offset, void *val, size_t bytes)
+{
+	struct sprd_efuse *efuse = context;
+	bool blk_double = efuse->data->blk_double;
+	bool lock;
+	int ret;
+
+	ret = sprd_efuse_lock(efuse);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(efuse->clk);
+	if (ret)
+		goto unlock;
+
+	/*
+	 * If the writing bytes are equal with the block width, which means the
+	 * whole block will be programmed. For this case, we should not allow
+	 * this block to be programmed again by locking this block.
+	 *
+	 * If the block was programmed partially, we should allow this block to
+	 * be programmed again.
+	 */
+	if (bytes < SPRD_EFUSE_BLOCK_WIDTH)
+		lock = false;
+	else
+		lock = true;
+
+	ret = sprd_efuse_raw_prog(efuse, offset, blk_double, lock, val);
+
+	clk_disable_unprepare(efuse->clk);
+
+unlock:
+	sprd_efuse_unlock(efuse);
+	return ret;
+}
+
+static int sprd_efuse_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct nvmem_device *nvmem;
+	struct nvmem_config econfig = { };
+	struct sprd_efuse *efuse;
+	const struct sprd_efuse_variant_data *pdata;
+	int ret;
+
+	pdata = of_device_get_match_data(&pdev->dev);
+	if (!pdata) {
+		dev_err(&pdev->dev, "No matching driver data found\n");
+		return -EINVAL;
+	}
+
+	efuse = devm_kzalloc(&pdev->dev, sizeof(*efuse), GFP_KERNEL);
+	if (!efuse)
+		return -ENOMEM;
+
+	efuse->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(efuse->base))
+		return PTR_ERR(efuse->base);
+
+	ret = of_hwspin_lock_get_id(np, 0);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to get hwlock id\n");
+		return ret;
+	}
+
+	efuse->hwlock = devm_hwspin_lock_request_specific(&pdev->dev, ret);
+	if (!efuse->hwlock) {
+		dev_err(&pdev->dev, "failed to request hwlock\n");
+		return -ENXIO;
+	}
+
+	efuse->clk = devm_clk_get(&pdev->dev, "enable");
+	if (IS_ERR(efuse->clk)) {
+		dev_err(&pdev->dev, "failed to get enable clock\n");
+		return PTR_ERR(efuse->clk);
+	}
+
+	mutex_init(&efuse->mutex);
+	efuse->dev = &pdev->dev;
+	efuse->data = pdata;
+
+	econfig.stride = 1;
+	econfig.word_size = 1;
+	econfig.read_only = false;
+	econfig.name = "sprd-efuse";
+	econfig.size = efuse->data->blk_nums * SPRD_EFUSE_BLOCK_WIDTH;
+	econfig.add_legacy_fixed_of_cells = true;
+	econfig.reg_read = sprd_efuse_read;
+	econfig.reg_write = sprd_efuse_write;
+	econfig.priv = efuse;
+	econfig.dev = &pdev->dev;
+	nvmem = devm_nvmem_register(&pdev->dev, &econfig);
+	if (IS_ERR(nvmem)) {
+		dev_err(&pdev->dev, "failed to register nvmem\n");
+		return PTR_ERR(nvmem);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id sprd_efuse_of_match[] = {
+	{ .compatible = "sprd,ums312-efuse", .data = &ums312_data },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sprd_efuse_of_match);
+
+static struct platform_driver sprd_efuse_driver = {
+	.probe = sprd_efuse_probe,
+	.driver = {
+		.name = "sprd-efuse",
+		.of_match_table = sprd_efuse_of_match,
+	},
+};
+
+module_platform_driver(sprd_efuse_driver);
+
+MODULE_AUTHOR("Freeman Liu <freeman.liu@spreadtrum.com>");
+MODULE_DESCRIPTION("Spreadtrum AP efuse driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/stm32-bsec-optee-ta.c b/drivers/nvmem/stm32-bsec-optee-ta.c
new file mode 100644
index 000000000..f89ce791d
--- /dev/null
+++ b/drivers/nvmem/stm32-bsec-optee-ta.c
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OP-TEE STM32MP BSEC PTA interface, used by STM32 ROMEM driver
+ *
+ * Copyright (C) 2022, STMicroelectronics - All Rights Reserved
+ */
+
+#include <linux/tee_drv.h>
+
+#include "stm32-bsec-optee-ta.h"
+
+/*
+ * Read OTP memory
+ *
+ * [in]		value[0].a		OTP start offset in byte
+ * [in]		value[0].b		Access type (0:shadow, 1:fuse, 2:lock)
+ * [out]	memref[1].buffer	Output buffer to store read values
+ * [out]	memref[1].size		Size of OTP to be read
+ *
+ * Return codes:
+ * TEE_SUCCESS - Invoke command success
+ * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
+ * TEE_ERROR_ACCESS_DENIED - OTP not accessible by caller
+ */
+#define PTA_BSEC_READ_MEM		0x0
+
+/*
+ * Write OTP memory
+ *
+ * [in]		value[0].a		OTP start offset in byte
+ * [in]		value[0].b		Access type (0:shadow, 1:fuse, 2:lock)
+ * [in]		memref[1].buffer	Input buffer to read values
+ * [in]		memref[1].size		Size of OTP to be written
+ *
+ * Return codes:
+ * TEE_SUCCESS - Invoke command success
+ * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
+ * TEE_ERROR_ACCESS_DENIED - OTP not accessible by caller
+ */
+#define PTA_BSEC_WRITE_MEM		0x1
+
+/* value of PTA_BSEC access type = value[in] b */
+#define SHADOW_ACCESS	0
+#define FUSE_ACCESS	1
+#define LOCK_ACCESS	2
+
+/* Bitfield definition for LOCK status */
+#define LOCK_PERM			BIT(30)
+
+/* OP-TEE STM32MP BSEC TA UUID */
+static const uuid_t stm32mp_bsec_ta_uuid =
+	UUID_INIT(0x94cf71ad, 0x80e6, 0x40b5,
+		  0xa7, 0xc6, 0x3d, 0xc5, 0x01, 0xeb, 0x28, 0x03);
+
+/*
+ * Check whether this driver supports the BSEC TA in the TEE instance
+ * represented by the params (ver/data) to this function.
+ */
+static int stm32_bsec_optee_ta_match(struct tee_ioctl_version_data *ver,
+				     const void *data)
+{
+	/* Currently this driver only supports GP compliant, OP-TEE based TA */
+	if ((ver->impl_id == TEE_IMPL_ID_OPTEE) &&
+		(ver->gen_caps & TEE_GEN_CAP_GP))
+		return 1;
+	else
+		return 0;
+}
+
+/* Open a session to OP-TEE for STM32MP BSEC TA */
+static int stm32_bsec_ta_open_session(struct tee_context *ctx, u32 *id)
+{
+	struct tee_ioctl_open_session_arg sess_arg;
+	int rc;
+
+	memset(&sess_arg, 0, sizeof(sess_arg));
+	export_uuid(sess_arg.uuid, &stm32mp_bsec_ta_uuid);
+	sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL;
+	sess_arg.num_params = 0;
+
+	rc = tee_client_open_session(ctx, &sess_arg, NULL);
+	if ((rc < 0) || (sess_arg.ret != 0)) {
+		pr_err("%s: tee_client_open_session failed err:%#x, ret:%#x\n",
+		       __func__, sess_arg.ret, rc);
+		if (!rc)
+			rc = -EINVAL;
+	} else {
+		*id = sess_arg.session;
+	}
+
+	return rc;
+}
+
+/* close a session to OP-TEE for STM32MP BSEC TA */
+static void stm32_bsec_ta_close_session(void *ctx, u32 id)
+{
+	tee_client_close_session(ctx, id);
+}
+
+/* stm32_bsec_optee_ta_open() - initialize the STM32MP BSEC TA */
+int stm32_bsec_optee_ta_open(struct tee_context **ctx)
+{
+	struct tee_context *tee_ctx;
+	u32 session_id;
+	int rc;
+
+	/* Open context with TEE driver */
+	tee_ctx = tee_client_open_context(NULL, stm32_bsec_optee_ta_match, NULL, NULL);
+	if (IS_ERR(tee_ctx)) {
+		rc = PTR_ERR(tee_ctx);
+		if (rc == -ENOENT)
+			return -EPROBE_DEFER;
+		pr_err("%s: tee_client_open_context failed (%d)\n", __func__, rc);
+
+		return rc;
+	}
+
+	/* Check STM32MP BSEC TA presence */
+	rc = stm32_bsec_ta_open_session(tee_ctx, &session_id);
+	if (rc) {
+		tee_client_close_context(tee_ctx);
+		return rc;
+	}
+
+	stm32_bsec_ta_close_session(tee_ctx, session_id);
+
+	*ctx = tee_ctx;
+
+	return 0;
+}
+
+/* stm32_bsec_optee_ta_open() - release the PTA STM32MP BSEC TA */
+void stm32_bsec_optee_ta_close(void *ctx)
+{
+	tee_client_close_context(ctx);
+}
+
+/* stm32_bsec_optee_ta_read() - nvmem read access using PTA client driver */
+int stm32_bsec_optee_ta_read(struct tee_context *ctx, unsigned int offset,
+			     void *buf, size_t bytes)
+{
+	struct tee_shm *shm;
+	struct tee_ioctl_invoke_arg arg;
+	struct tee_param param[2];
+	u8 *shm_buf;
+	u32 start, num_bytes;
+	int ret;
+	u32 session_id;
+
+	ret = stm32_bsec_ta_open_session(ctx, &session_id);
+	if (ret)
+		return ret;
+
+	memset(&arg, 0, sizeof(arg));
+	memset(&param, 0, sizeof(param));
+
+	arg.func = PTA_BSEC_READ_MEM;
+	arg.session = session_id;
+	arg.num_params = 2;
+
+	/* align access on 32bits */
+	start = ALIGN_DOWN(offset, 4);
+	num_bytes = round_up(offset + bytes - start, 4);
+	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
+	param[0].u.value.a = start;
+	param[0].u.value.b = SHADOW_ACCESS;
+
+	shm = tee_shm_alloc_kernel_buf(ctx, num_bytes);
+	if (IS_ERR(shm)) {
+		ret = PTR_ERR(shm);
+		goto out_tee_session;
+	}
+
+	param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT;
+	param[1].u.memref.shm = shm;
+	param[1].u.memref.size = num_bytes;
+
+	ret = tee_client_invoke_func(ctx, &arg, param);
+	if (ret < 0 || arg.ret != 0) {
+		pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n",
+			arg.ret, ret);
+		if (!ret)
+			ret = -EIO;
+	}
+	if (!ret) {
+		shm_buf = tee_shm_get_va(shm, 0);
+		if (IS_ERR(shm_buf)) {
+			ret = PTR_ERR(shm_buf);
+			pr_err("tee_shm_get_va failed for transmit (%d)\n", ret);
+		} else {
+			/* read data from 32 bits aligned buffer */
+			memcpy(buf, &shm_buf[offset % 4], bytes);
+		}
+	}
+
+	tee_shm_free(shm);
+
+out_tee_session:
+	stm32_bsec_ta_close_session(ctx, session_id);
+
+	return ret;
+}
+
+/* stm32_bsec_optee_ta_write() - nvmem write access using PTA client driver */
+int stm32_bsec_optee_ta_write(struct tee_context *ctx, unsigned int lower,
+			      unsigned int offset, void *buf, size_t bytes)
+{	struct tee_shm *shm;
+	struct tee_ioctl_invoke_arg arg;
+	struct tee_param param[2];
+	u8 *shm_buf;
+	int ret;
+	u32 session_id;
+
+	ret = stm32_bsec_ta_open_session(ctx, &session_id);
+	if (ret)
+		return ret;
+
+	/* Allow only writing complete 32-bits aligned words */
+	if ((bytes % 4) || (offset % 4))
+		return -EINVAL;
+
+	memset(&arg, 0, sizeof(arg));
+	memset(&param, 0, sizeof(param));
+
+	arg.func = PTA_BSEC_WRITE_MEM;
+	arg.session = session_id;
+	arg.num_params = 2;
+
+	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
+	param[0].u.value.a = offset;
+	param[0].u.value.b = FUSE_ACCESS;
+
+	shm = tee_shm_alloc_kernel_buf(ctx, bytes);
+	if (IS_ERR(shm)) {
+		ret = PTR_ERR(shm);
+		goto out_tee_session;
+	}
+
+	param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT;
+	param[1].u.memref.shm = shm;
+	param[1].u.memref.size = bytes;
+
+	shm_buf = tee_shm_get_va(shm, 0);
+	if (IS_ERR(shm_buf)) {
+		ret = PTR_ERR(shm_buf);
+		pr_err("tee_shm_get_va failed for transmit (%d)\n", ret);
+		tee_shm_free(shm);
+
+		goto out_tee_session;
+	}
+
+	memcpy(shm_buf, buf, bytes);
+
+	ret = tee_client_invoke_func(ctx, &arg, param);
+	if (ret < 0 || arg.ret != 0) {
+		pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n", arg.ret, ret);
+		if (!ret)
+			ret = -EIO;
+	}
+	pr_debug("Write OTPs %d to %zu, ret=%d\n", offset / 4, (offset + bytes) / 4, ret);
+
+	/* Lock the upper OTPs with ECC protection, word programming only */
+	if (!ret && ((offset + bytes) >= (lower * 4))) {
+		u32 start, nb_lock;
+		u32 *lock = (u32 *)shm_buf;
+		int i;
+
+		/*
+		 * don't lock the lower OTPs, no ECC protection and incremental
+		 * bit programming, a second write is allowed
+		 */
+		start = max_t(u32, offset, lower * 4);
+		nb_lock = (offset + bytes - start) / 4;
+
+		param[0].u.value.a = start;
+		param[0].u.value.b = LOCK_ACCESS;
+		param[1].u.memref.size = nb_lock * 4;
+
+		for (i = 0; i < nb_lock; i++)
+			lock[i] = LOCK_PERM;
+
+		ret = tee_client_invoke_func(ctx, &arg, param);
+		if (ret < 0 || arg.ret != 0) {
+			pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n", arg.ret, ret);
+			if (!ret)
+				ret = -EIO;
+		}
+		pr_debug("Lock upper OTPs %d to %d, ret=%d\n",
+			 start / 4, start / 4 + nb_lock, ret);
+	}
+
+	tee_shm_free(shm);
+
+out_tee_session:
+	stm32_bsec_ta_close_session(ctx, session_id);
+
+	return ret;
+}
diff --git a/drivers/nvmem/stm32-bsec-optee-ta.h b/drivers/nvmem/stm32-bsec-optee-ta.h
new file mode 100644
index 000000000..3966a0535
--- /dev/null
+++ b/drivers/nvmem/stm32-bsec-optee-ta.h
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OP-TEE STM32MP BSEC PTA interface, used by STM32 ROMEM driver
+ *
+ * Copyright (C) 2022, STMicroelectronics - All Rights Reserved
+ */
+
+#if IS_ENABLED(CONFIG_NVMEM_STM32_BSEC_OPTEE_TA)
+/**
+ * stm32_bsec_optee_ta_open() - initialize the STM32 BSEC TA
+ * @ctx: the OP-TEE context on success
+ *
+ * Return:
+ *	On success, 0. On failure, -errno.
+ */
+int stm32_bsec_optee_ta_open(struct tee_context **ctx);
+
+/**
+ * stm32_bsec_optee_ta_close() - release the STM32 BSEC TA
+ * @ctx: the OP-TEE context
+ *
+ * This function used to clean the OP-TEE resources initialized in
+ * stm32_bsec_optee_ta_open(); it can be used as callback to
+ * devm_add_action_or_reset()
+ */
+void stm32_bsec_optee_ta_close(void *ctx);
+
+/**
+ * stm32_bsec_optee_ta_read() - nvmem read access using TA client driver
+ * @ctx: the OP-TEE context provided by stm32_bsec_optee_ta_open
+ * @offset: nvmem offset
+ * @buf: buffer to fill with nvem values
+ * @bytes: number of bytes to read
+ *
+ * Return:
+ *	On success, 0. On failure, -errno.
+ */
+int stm32_bsec_optee_ta_read(struct tee_context *ctx, unsigned int offset,
+			     void *buf, size_t bytes);
+
+/**
+ * stm32_bsec_optee_ta_write() - nvmem write access using TA client driver
+ * @ctx: the OP-TEE context provided by stm32_bsec_optee_ta_open
+ * @lower: number of lower OTP, not protected by ECC
+ * @offset: nvmem offset
+ * @buf: buffer with nvem values
+ * @bytes: number of bytes to write
+ *
+ * Return:
+ *	On success, 0. On failure, -errno.
+ */
+int stm32_bsec_optee_ta_write(struct tee_context *ctx, unsigned int lower,
+			      unsigned int offset, void *buf, size_t bytes);
+
+#else
+
+static inline int stm32_bsec_optee_ta_open(struct tee_context **ctx)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline void stm32_bsec_optee_ta_close(void *ctx)
+{
+}
+
+static inline int stm32_bsec_optee_ta_read(struct tee_context *ctx,
+					   unsigned int offset, void *buf,
+					   size_t bytes)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int stm32_bsec_optee_ta_write(struct tee_context *ctx,
+					    unsigned int lower,
+					    unsigned int offset, void *buf,
+					    size_t bytes)
+{
+	return -EOPNOTSUPP;
+}
+#endif /* CONFIG_NVMEM_STM32_BSEC_OPTEE_TA */
diff --git a/drivers/nvmem/stm32-romem.c b/drivers/nvmem/stm32-romem.c
new file mode 100644
index 000000000..82879b1c9
--- /dev/null
+++ b/drivers/nvmem/stm32-romem.c
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * STM32 Factory-programmed memory read access driver
+ *
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author: Fabrice Gasnier <fabrice.gasnier@st.com> for STMicroelectronics.
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/tee_drv.h>
+
+#include "stm32-bsec-optee-ta.h"
+
+/* BSEC secure service access from non-secure */
+#define STM32_SMC_BSEC			0x82001003
+#define STM32_SMC_READ_SHADOW		0x01
+#define STM32_SMC_PROG_OTP		0x02
+#define STM32_SMC_WRITE_SHADOW		0x03
+#define STM32_SMC_READ_OTP		0x04
+
+/* shadow registers offset */
+#define STM32MP15_BSEC_DATA0		0x200
+
+struct stm32_romem_cfg {
+	int size;
+	u8 lower;
+	bool ta;
+};
+
+struct stm32_romem_priv {
+	void __iomem *base;
+	struct nvmem_config cfg;
+	u8 lower;
+	struct tee_context *ctx;
+};
+
+static int stm32_romem_read(void *context, unsigned int offset, void *buf,
+			    size_t bytes)
+{
+	struct stm32_romem_priv *priv = context;
+	u8 *buf8 = buf;
+	int i;
+
+	for (i = offset; i < offset + bytes; i++)
+		*buf8++ = readb_relaxed(priv->base + i);
+
+	return 0;
+}
+
+static int stm32_bsec_smc(u8 op, u32 otp, u32 data, u32 *result)
+{
+#if IS_ENABLED(CONFIG_HAVE_ARM_SMCCC)
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(STM32_SMC_BSEC, op, otp, data, 0, 0, 0, 0, &res);
+	if (res.a0)
+		return -EIO;
+
+	if (result)
+		*result = (u32)res.a1;
+
+	return 0;
+#else
+	return -ENXIO;
+#endif
+}
+
+static int stm32_bsec_read(void *context, unsigned int offset, void *buf,
+			   size_t bytes)
+{
+	struct stm32_romem_priv *priv = context;
+	struct device *dev = priv->cfg.dev;
+	u32 roffset, rbytes, val;
+	u8 *buf8 = buf, *val8 = (u8 *)&val;
+	int i, j = 0, ret, skip_bytes, size;
+
+	/* Round unaligned access to 32-bits */
+	roffset = rounddown(offset, 4);
+	skip_bytes = offset & 0x3;
+	rbytes = roundup(bytes + skip_bytes, 4);
+
+	if (roffset + rbytes > priv->cfg.size)
+		return -EINVAL;
+
+	for (i = roffset; (i < roffset + rbytes); i += 4) {
+		u32 otp = i >> 2;
+
+		if (otp < priv->lower) {
+			/* read lower data from shadow registers */
+			val = readl_relaxed(
+				priv->base + STM32MP15_BSEC_DATA0 + i);
+		} else {
+			ret = stm32_bsec_smc(STM32_SMC_READ_SHADOW, otp, 0,
+					     &val);
+			if (ret) {
+				dev_err(dev, "Can't read data%d (%d)\n", otp,
+					ret);
+				return ret;
+			}
+		}
+		/* skip first bytes in case of unaligned read */
+		if (skip_bytes)
+			size = min(bytes, (size_t)(4 - skip_bytes));
+		else
+			size = min(bytes, (size_t)4);
+		memcpy(&buf8[j], &val8[skip_bytes], size);
+		bytes -= size;
+		j += size;
+		skip_bytes = 0;
+	}
+
+	return 0;
+}
+
+static int stm32_bsec_write(void *context, unsigned int offset, void *buf,
+			    size_t bytes)
+{
+	struct stm32_romem_priv *priv = context;
+	struct device *dev = priv->cfg.dev;
+	u32 *buf32 = buf;
+	int ret, i;
+
+	/* Allow only writing complete 32-bits aligned words */
+	if ((bytes % 4) || (offset % 4))
+		return -EINVAL;
+
+	for (i = offset; i < offset + bytes; i += 4) {
+		ret = stm32_bsec_smc(STM32_SMC_PROG_OTP, i >> 2, *buf32++,
+				     NULL);
+		if (ret) {
+			dev_err(dev, "Can't write data%d (%d)\n", i >> 2, ret);
+			return ret;
+		}
+	}
+
+	if (offset + bytes >= priv->lower * 4)
+		dev_warn(dev, "Update of upper OTPs with ECC protection (word programming, only once)\n");
+
+	return 0;
+}
+
+static int stm32_bsec_pta_read(void *context, unsigned int offset, void *buf,
+			       size_t bytes)
+{
+	struct stm32_romem_priv *priv = context;
+
+	return stm32_bsec_optee_ta_read(priv->ctx, offset, buf, bytes);
+}
+
+static int stm32_bsec_pta_write(void *context, unsigned int offset, void *buf,
+				size_t bytes)
+{
+	struct stm32_romem_priv *priv = context;
+
+	return stm32_bsec_optee_ta_write(priv->ctx, priv->lower, offset, buf, bytes);
+}
+
+static bool stm32_bsec_smc_check(void)
+{
+	u32 val;
+	int ret;
+
+	/* check that the OP-TEE support the BSEC SMC (legacy mode) */
+	ret = stm32_bsec_smc(STM32_SMC_READ_SHADOW, 0, 0, &val);
+
+	return !ret;
+}
+
+static bool optee_presence_check(void)
+{
+	struct device_node *np;
+	bool tee_detected = false;
+
+	/* check that the OP-TEE node is present and available. */
+	np = of_find_compatible_node(NULL, NULL, "linaro,optee-tz");
+	if (np && of_device_is_available(np))
+		tee_detected = true;
+	of_node_put(np);
+
+	return tee_detected;
+}
+
+static int stm32_romem_probe(struct platform_device *pdev)
+{
+	const struct stm32_romem_cfg *cfg;
+	struct device *dev = &pdev->dev;
+	struct stm32_romem_priv *priv;
+	struct resource *res;
+	int rc;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->cfg.name = "stm32-romem";
+	priv->cfg.word_size = 1;
+	priv->cfg.stride = 1;
+	priv->cfg.dev = dev;
+	priv->cfg.priv = priv;
+	priv->cfg.owner = THIS_MODULE;
+	priv->cfg.type = NVMEM_TYPE_OTP;
+	priv->cfg.add_legacy_fixed_of_cells = true;
+
+	priv->lower = 0;
+
+	cfg = device_get_match_data(dev);
+	if (!cfg) {
+		priv->cfg.read_only = true;
+		priv->cfg.size = resource_size(res);
+		priv->cfg.reg_read = stm32_romem_read;
+	} else {
+		priv->cfg.size = cfg->size;
+		priv->lower = cfg->lower;
+		if (cfg->ta || optee_presence_check()) {
+			rc = stm32_bsec_optee_ta_open(&priv->ctx);
+			if (rc) {
+				/* wait for OP-TEE client driver to be up and ready */
+				if (rc == -EPROBE_DEFER)
+					return -EPROBE_DEFER;
+				/* BSEC PTA is required or SMC not supported */
+				if (cfg->ta || !stm32_bsec_smc_check())
+					return rc;
+			}
+		}
+		if (priv->ctx) {
+			rc = devm_add_action_or_reset(dev, stm32_bsec_optee_ta_close, priv->ctx);
+			if (rc) {
+				dev_err(dev, "devm_add_action_or_reset() failed (%d)\n", rc);
+				return rc;
+			}
+			priv->cfg.reg_read = stm32_bsec_pta_read;
+			priv->cfg.reg_write = stm32_bsec_pta_write;
+		} else {
+			priv->cfg.reg_read = stm32_bsec_read;
+			priv->cfg.reg_write = stm32_bsec_write;
+		}
+	}
+
+	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &priv->cfg));
+}
+
+/*
+ * STM32MP15/13 BSEC OTP regions: 4096 OTP bits (with 3072 effective bits)
+ * => 96 x 32-bits data words
+ * - Lower: 1K bits, 2:1 redundancy, incremental bit programming
+ *   => 32 (x 32-bits) lower shadow registers = words 0 to 31
+ * - Upper: 2K bits, ECC protection, word programming only
+ *   => 64 (x 32-bits) = words 32 to 95
+ */
+static const struct stm32_romem_cfg stm32mp15_bsec_cfg = {
+	.size = 384,
+	.lower = 32,
+	.ta = false,
+};
+
+static const struct stm32_romem_cfg stm32mp13_bsec_cfg = {
+	.size = 384,
+	.lower = 32,
+	.ta = true,
+};
+
+/*
+ * STM32MP25 BSEC OTP: 3 regions of 32-bits data words
+ *   lower OTP (OTP0 to OTP127), bitwise (1-bit) programmable
+ *   mid OTP (OTP128 to OTP255), bulk (32-bit) programmable
+ *   upper OTP (OTP256 to OTP383), bulk (32-bit) programmable
+ *              but no access to HWKEY and ECIES key: limited at OTP367
+ */
+static const struct stm32_romem_cfg stm32mp25_bsec_cfg = {
+	.size = 368 * 4,
+	.lower = 127,
+	.ta = true,
+};
+
+static const struct of_device_id stm32_romem_of_match[] __maybe_unused = {
+	{ .compatible = "st,stm32f4-otp", }, {
+		.compatible = "st,stm32mp15-bsec",
+		.data = (void *)&stm32mp15_bsec_cfg,
+	}, {
+		.compatible = "st,stm32mp13-bsec",
+		.data = (void *)&stm32mp13_bsec_cfg,
+	}, {
+		.compatible = "st,stm32mp25-bsec",
+		.data = (void *)&stm32mp25_bsec_cfg,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, stm32_romem_of_match);
+
+static struct platform_driver stm32_romem_driver = {
+	.probe = stm32_romem_probe,
+	.driver = {
+		.name = "stm32-romem",
+		.of_match_table = of_match_ptr(stm32_romem_of_match),
+	},
+};
+module_platform_driver(stm32_romem_driver);
+
+MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32 RO-MEM");
+MODULE_ALIAS("platform:nvmem-stm32-romem");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/sunplus-ocotp.c b/drivers/nvmem/sunplus-ocotp.c
new file mode 100644
index 000000000..6884def3b
--- /dev/null
+++ b/drivers/nvmem/sunplus-ocotp.c
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * The OCOTP driver for Sunplus	SP7021
+ *
+ * Copyright (C) 2019 Sunplus Technology Inc., All rights reserved.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+
+/*
+ * OTP memory
+ * Each bank contains 4 words (32 bits).
+ * Bank 0 starts at offset 0 from the base.
+ */
+
+#define OTP_WORDS_PER_BANK		4
+#define OTP_WORD_SIZE			sizeof(u32)
+#define OTP_BIT_ADDR_OF_BANK		(8 * OTP_WORD_SIZE * OTP_WORDS_PER_BANK)
+#define QAC628_OTP_NUM_BANKS		8
+#define QAC628_OTP_SIZE			(QAC628_OTP_NUM_BANKS * OTP_WORDS_PER_BANK * OTP_WORD_SIZE)
+#define OTP_READ_TIMEOUT_US		200000
+
+/* HB_GPIO */
+#define ADDRESS_8_DATA			0x20
+
+/* OTP_RX */
+#define OTP_CONTROL_2			0x48
+#define OTP_RD_PERIOD			GENMASK(15, 8)
+#define OTP_RD_PERIOD_MASK		~GENMASK(15, 8)
+#define CPU_CLOCK			FIELD_PREP(OTP_RD_PERIOD, 30)
+#define SEL_BAK_KEY2			BIT(5)
+#define SEL_BAK_KEY2_MASK		~BIT(5)
+#define SW_TRIM_EN			BIT(4)
+#define SW_TRIM_EN_MASK			~BIT(4)
+#define SEL_BAK_KEY			BIT(3)
+#define SEL_BAK_KEY_MASK		~BIT(3)
+#define OTP_READ			BIT(2)
+#define OTP_LOAD_SECURE_DATA		BIT(1)
+#define OTP_LOAD_SECURE_DATA_MASK	~BIT(1)
+#define OTP_DO_CRC			BIT(0)
+#define OTP_DO_CRC_MASK			~BIT(0)
+#define OTP_STATUS			0x4c
+#define OTP_READ_DONE			BIT(4)
+#define OTP_READ_DONE_MASK		~BIT(4)
+#define OTP_LOAD_SECURE_DONE_MASK	~BIT(2)
+#define OTP_READ_ADDRESS		0x50
+
+enum base_type {
+	HB_GPIO,
+	OTPRX,
+	BASEMAX,
+};
+
+struct sp_ocotp_priv {
+	struct device *dev;
+	void __iomem *base[BASEMAX];
+	struct clk *clk;
+};
+
+struct sp_ocotp_data {
+	int size;
+};
+
+static const struct sp_ocotp_data sp_otp_v0 = {
+	.size = QAC628_OTP_SIZE,
+};
+
+static int sp_otp_read_real(struct sp_ocotp_priv *otp, int addr, char *value)
+{
+	unsigned int addr_data;
+	unsigned int byte_shift;
+	unsigned int status;
+	int ret;
+
+	addr_data = addr % (OTP_WORD_SIZE * OTP_WORDS_PER_BANK);
+	addr_data = addr_data / OTP_WORD_SIZE;
+
+	byte_shift = addr % (OTP_WORD_SIZE * OTP_WORDS_PER_BANK);
+	byte_shift = byte_shift % OTP_WORD_SIZE;
+
+	addr = addr / (OTP_WORD_SIZE * OTP_WORDS_PER_BANK);
+	addr = addr * OTP_BIT_ADDR_OF_BANK;
+
+	writel(readl(otp->base[OTPRX] + OTP_STATUS) & OTP_READ_DONE_MASK &
+	       OTP_LOAD_SECURE_DONE_MASK, otp->base[OTPRX] + OTP_STATUS);
+	writel(addr, otp->base[OTPRX] + OTP_READ_ADDRESS);
+	writel(readl(otp->base[OTPRX] + OTP_CONTROL_2) | OTP_READ,
+	       otp->base[OTPRX] + OTP_CONTROL_2);
+	writel(readl(otp->base[OTPRX] + OTP_CONTROL_2) & SEL_BAK_KEY2_MASK & SW_TRIM_EN_MASK
+	       & SEL_BAK_KEY_MASK & OTP_LOAD_SECURE_DATA_MASK & OTP_DO_CRC_MASK,
+	       otp->base[OTPRX] + OTP_CONTROL_2);
+	writel((readl(otp->base[OTPRX] + OTP_CONTROL_2) & OTP_RD_PERIOD_MASK) | CPU_CLOCK,
+	       otp->base[OTPRX] + OTP_CONTROL_2);
+
+	ret = readl_poll_timeout(otp->base[OTPRX] + OTP_STATUS, status,
+				 status & OTP_READ_DONE, 10, OTP_READ_TIMEOUT_US);
+
+	if (ret < 0)
+		return ret;
+
+	*value = (readl(otp->base[HB_GPIO] + ADDRESS_8_DATA + addr_data * OTP_WORD_SIZE)
+		  >> (8 * byte_shift)) & 0xff;
+
+	return ret;
+}
+
+static int sp_ocotp_read(void *priv, unsigned int offset, void *value, size_t bytes)
+{
+	struct sp_ocotp_priv *otp = priv;
+	unsigned int addr;
+	char *buf = value;
+	char val[4];
+	int ret;
+
+	ret = clk_enable(otp->clk);
+	if (ret)
+		return ret;
+
+	*buf = 0;
+	for (addr = offset; addr < (offset + bytes); addr++) {
+		ret = sp_otp_read_real(otp, addr, val);
+		if (ret < 0) {
+			dev_err(otp->dev, "OTP read fail:%d at %d", ret, addr);
+			goto disable_clk;
+		}
+
+		*buf++ = *val;
+	}
+
+disable_clk:
+	clk_disable(otp->clk);
+
+	return ret;
+}
+
+static struct nvmem_config sp_ocotp_nvmem_config = {
+	.name = "sp-ocotp",
+	.add_legacy_fixed_of_cells = true,
+	.read_only = true,
+	.word_size = 1,
+	.size = QAC628_OTP_SIZE,
+	.stride = 1,
+	.reg_read = sp_ocotp_read,
+	.owner = THIS_MODULE,
+};
+
+static int sp_ocotp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct nvmem_device *nvmem;
+	struct sp_ocotp_priv *otp;
+	int ret;
+
+	otp = devm_kzalloc(dev, sizeof(*otp), GFP_KERNEL);
+	if (!otp)
+		return -ENOMEM;
+
+	otp->dev = dev;
+
+	otp->base[HB_GPIO] = devm_platform_ioremap_resource_byname(pdev, "hb_gpio");
+	if (IS_ERR(otp->base[HB_GPIO]))
+		return PTR_ERR(otp->base[HB_GPIO]);
+
+	otp->base[OTPRX] = devm_platform_ioremap_resource_byname(pdev, "otprx");
+	if (IS_ERR(otp->base[OTPRX]))
+		return PTR_ERR(otp->base[OTPRX]);
+
+	otp->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(otp->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(otp->clk),
+						"devm_clk_get fail\n");
+
+	ret = clk_prepare(otp->clk);
+	if (ret < 0) {
+		dev_err(dev, "failed to prepare clk: %d\n", ret);
+		return ret;
+	}
+
+	sp_ocotp_nvmem_config.priv = otp;
+	sp_ocotp_nvmem_config.dev = dev;
+
+	nvmem = devm_nvmem_register(dev, &sp_ocotp_nvmem_config);
+	if (IS_ERR(nvmem)) {
+		ret = dev_err_probe(&pdev->dev, PTR_ERR(nvmem),
+						"register nvmem device fail\n");
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, nvmem);
+
+	dev_dbg(dev, "banks:%d x wpb:%d x wsize:%d = %d",
+		(int)QAC628_OTP_NUM_BANKS, (int)OTP_WORDS_PER_BANK,
+		(int)OTP_WORD_SIZE, (int)QAC628_OTP_SIZE);
+
+	return 0;
+err:
+	clk_unprepare(otp->clk);
+	return ret;
+}
+
+static const struct of_device_id sp_ocotp_dt_ids[] = {
+	{ .compatible = "sunplus,sp7021-ocotp", .data = &sp_otp_v0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sp_ocotp_dt_ids);
+
+static struct platform_driver sp_otp_driver = {
+	.probe     = sp_ocotp_probe,
+	.driver    = {
+		.name           = "sunplus,sp7021-ocotp",
+		.of_match_table = sp_ocotp_dt_ids,
+	}
+};
+module_platform_driver(sp_otp_driver);
+
+MODULE_AUTHOR("Vincent Shih <vincent.sunplus@gmail.com>");
+MODULE_DESCRIPTION("Sunplus On-Chip OTP driver");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c
new file mode 100644
index 000000000..ba14a7620
--- /dev/null
+++ b/drivers/nvmem/sunxi_sid.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Allwinner sunXi SoCs Security ID support.
+ *
+ * Copyright (c) 2013 Oliver Schinagl <oliver@schinagl.nl>
+ * Copyright (C) 2014 Maxime Ripard <maxime.ripard@free-electrons.com>
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+
+/* Registers and special values for doing register-based SID readout on H3 */
+#define SUN8I_SID_PRCTL		0x40
+#define SUN8I_SID_RDKEY		0x60
+
+#define SUN8I_SID_OFFSET_MASK	0x1FF
+#define SUN8I_SID_OFFSET_SHIFT	16
+#define SUN8I_SID_OP_LOCK	(0xAC << 8)
+#define SUN8I_SID_READ		BIT(1)
+
+struct sunxi_sid_cfg {
+	u32	value_offset;
+	u32	size;
+	bool	need_register_readout;
+};
+
+struct sunxi_sid {
+	void __iomem		*base;
+	u32			value_offset;
+};
+
+static int sunxi_sid_read(void *context, unsigned int offset,
+			  void *val, size_t bytes)
+{
+	struct sunxi_sid *sid = context;
+	u32 word;
+
+	/* .stride = 4 so offset is guaranteed to be aligned */
+	__ioread32_copy(val, sid->base + sid->value_offset + offset, bytes / 4);
+
+	val += round_down(bytes, 4);
+	offset += round_down(bytes, 4);
+	bytes = bytes % 4;
+
+	if (!bytes)
+		return 0;
+
+	/* Handle any trailing bytes */
+	word = readl_relaxed(sid->base + sid->value_offset + offset);
+	memcpy(val, &word, bytes);
+
+	return 0;
+}
+
+static int sun8i_sid_register_readout(const struct sunxi_sid *sid,
+				      const unsigned int offset,
+				      u32 *out)
+{
+	u32 reg_val;
+	int ret;
+
+	/* Set word, lock access, and set read command */
+	reg_val = (offset & SUN8I_SID_OFFSET_MASK)
+		  << SUN8I_SID_OFFSET_SHIFT;
+	reg_val |= SUN8I_SID_OP_LOCK | SUN8I_SID_READ;
+	writel(reg_val, sid->base + SUN8I_SID_PRCTL);
+
+	ret = readl_poll_timeout(sid->base + SUN8I_SID_PRCTL, reg_val,
+				 !(reg_val & SUN8I_SID_READ), 100, 250000);
+	if (ret)
+		return ret;
+
+	if (out)
+		*out = readl(sid->base + SUN8I_SID_RDKEY);
+
+	writel(0, sid->base + SUN8I_SID_PRCTL);
+
+	return 0;
+}
+
+/*
+ * On Allwinner H3, the value on the 0x200 offset of the SID controller seems
+ * to be not reliable at all.
+ * Read by the registers instead.
+ */
+static int sun8i_sid_read_by_reg(void *context, unsigned int offset,
+				 void *val, size_t bytes)
+{
+	struct sunxi_sid *sid = context;
+	u32 word;
+	int ret;
+
+	/* .stride = 4 so offset is guaranteed to be aligned */
+	while (bytes >= 4) {
+		ret = sun8i_sid_register_readout(sid, offset, val);
+		if (ret)
+			return ret;
+
+		val += 4;
+		offset += 4;
+		bytes -= 4;
+	}
+
+	if (!bytes)
+		return 0;
+
+	/* Handle any trailing bytes */
+	ret = sun8i_sid_register_readout(sid, offset, &word);
+	if (ret)
+		return ret;
+
+	memcpy(val, &word, bytes);
+
+	return 0;
+}
+
+static int sunxi_sid_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct nvmem_config *nvmem_cfg;
+	struct nvmem_device *nvmem;
+	struct sunxi_sid *sid;
+	int size;
+	char *randomness;
+	const struct sunxi_sid_cfg *cfg;
+
+	sid = devm_kzalloc(dev, sizeof(*sid), GFP_KERNEL);
+	if (!sid)
+		return -ENOMEM;
+
+	cfg = of_device_get_match_data(dev);
+	if (!cfg)
+		return -EINVAL;
+	sid->value_offset = cfg->value_offset;
+
+	sid->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(sid->base))
+		return PTR_ERR(sid->base);
+
+	size = cfg->size;
+
+	nvmem_cfg = devm_kzalloc(dev, sizeof(*nvmem_cfg), GFP_KERNEL);
+	if (!nvmem_cfg)
+		return -ENOMEM;
+
+	nvmem_cfg->dev = dev;
+	nvmem_cfg->name = "sunxi-sid";
+	nvmem_cfg->type = NVMEM_TYPE_OTP;
+	nvmem_cfg->add_legacy_fixed_of_cells = true;
+	nvmem_cfg->read_only = true;
+	nvmem_cfg->size = cfg->size;
+	nvmem_cfg->word_size = 1;
+	nvmem_cfg->stride = 4;
+	nvmem_cfg->priv = sid;
+	if (cfg->need_register_readout)
+		nvmem_cfg->reg_read = sun8i_sid_read_by_reg;
+	else
+		nvmem_cfg->reg_read = sunxi_sid_read;
+
+	nvmem = devm_nvmem_register(dev, nvmem_cfg);
+	if (IS_ERR(nvmem))
+		return PTR_ERR(nvmem);
+
+	randomness = kzalloc(size, GFP_KERNEL);
+	if (!randomness)
+		return -ENOMEM;
+
+	nvmem_cfg->reg_read(sid, 0, randomness, size);
+	add_device_randomness(randomness, size);
+	kfree(randomness);
+
+	platform_set_drvdata(pdev, nvmem);
+
+	return 0;
+}
+
+static const struct sunxi_sid_cfg sun4i_a10_cfg = {
+	.size = 0x10,
+};
+
+static const struct sunxi_sid_cfg sun7i_a20_cfg = {
+	.size = 0x200,
+};
+
+static const struct sunxi_sid_cfg sun8i_h3_cfg = {
+	.value_offset = 0x200,
+	.size = 0x100,
+	.need_register_readout = true,
+};
+
+static const struct sunxi_sid_cfg sun50i_a64_cfg = {
+	.value_offset = 0x200,
+	.size = 0x100,
+};
+
+static const struct sunxi_sid_cfg sun50i_h6_cfg = {
+	.value_offset = 0x200,
+	.size = 0x200,
+};
+
+static const struct of_device_id sunxi_sid_of_match[] = {
+	{ .compatible = "allwinner,sun4i-a10-sid", .data = &sun4i_a10_cfg },
+	{ .compatible = "allwinner,sun7i-a20-sid", .data = &sun7i_a20_cfg },
+	{ .compatible = "allwinner,sun8i-a83t-sid", .data = &sun50i_a64_cfg },
+	{ .compatible = "allwinner,sun8i-h3-sid", .data = &sun8i_h3_cfg },
+	{ .compatible = "allwinner,sun20i-d1-sid", .data = &sun50i_a64_cfg },
+	{ .compatible = "allwinner,sun50i-a64-sid", .data = &sun50i_a64_cfg },
+	{ .compatible = "allwinner,sun50i-h5-sid", .data = &sun50i_a64_cfg },
+	{ .compatible = "allwinner,sun50i-h6-sid", .data = &sun50i_h6_cfg },
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, sunxi_sid_of_match);
+
+static struct platform_driver sunxi_sid_driver = {
+	.probe = sunxi_sid_probe,
+	.driver = {
+		.name = "eeprom-sunxi-sid",
+		.of_match_table = sunxi_sid_of_match,
+	},
+};
+module_platform_driver(sunxi_sid_driver);
+
+MODULE_AUTHOR("Oliver Schinagl <oliver@schinagl.nl>");
+MODULE_DESCRIPTION("Allwinner sunxi security id driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c
new file mode 100644
index 000000000..467b28891
--- /dev/null
+++ b/drivers/nvmem/u-boot-env.c
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "layouts/u-boot-env.h"
+
+struct u_boot_env {
+	struct device *dev;
+	struct nvmem_device *nvmem;
+	enum u_boot_env_format format;
+
+	struct mtd_info *mtd;
+};
+
+static int u_boot_env_read(void *context, unsigned int offset, void *val,
+			   size_t bytes)
+{
+	struct u_boot_env *priv = context;
+	struct device *dev = priv->dev;
+	size_t bytes_read;
+	int err;
+
+	err = mtd_read(priv->mtd, offset, bytes, &bytes_read, val);
+	if (err && !mtd_is_bitflip(err)) {
+		dev_err(dev, "Failed to read from mtd: %d\n", err);
+		return err;
+	}
+
+	if (bytes_read != bytes) {
+		dev_err(dev, "Failed to read %zu bytes\n", bytes);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int u_boot_env_probe(struct platform_device *pdev)
+{
+	struct nvmem_config config = {
+		.name = "u-boot-env",
+		.reg_read = u_boot_env_read,
+	};
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct u_boot_env *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->dev = dev;
+
+	priv->format = (uintptr_t)of_device_get_match_data(dev);
+
+	priv->mtd = of_get_mtd_device_by_node(np);
+	if (IS_ERR(priv->mtd)) {
+		dev_err_probe(dev, PTR_ERR(priv->mtd), "Failed to get %pOF MTD\n", np);
+		return PTR_ERR(priv->mtd);
+	}
+
+	config.dev = dev;
+	config.priv = priv;
+	config.size = priv->mtd->size;
+
+	priv->nvmem = devm_nvmem_register(dev, &config);
+	if (IS_ERR(priv->nvmem))
+		return PTR_ERR(priv->nvmem);
+
+	return u_boot_env_parse(dev, priv->nvmem, priv->format);
+}
+
+static const struct of_device_id u_boot_env_of_match_table[] = {
+	{ .compatible = "u-boot,env", .data = (void *)U_BOOT_FORMAT_SINGLE, },
+	{ .compatible = "u-boot,env-redundant-bool", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
+	{ .compatible = "u-boot,env-redundant-count", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
+	{ .compatible = "brcm,env", .data = (void *)U_BOOT_FORMAT_BROADCOM, },
+	{},
+};
+
+static struct platform_driver u_boot_env_driver = {
+	.probe = u_boot_env_probe,
+	.driver = {
+		.name = "u_boot_env",
+		.of_match_table = u_boot_env_of_match_table,
+	},
+};
+module_platform_driver(u_boot_env_driver);
+
+MODULE_AUTHOR("Rafał Miłecki");
+MODULE_DESCRIPTION("U-Boot environment variables support module");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, u_boot_env_of_match_table);
diff --git a/drivers/nvmem/uniphier-efuse.c b/drivers/nvmem/uniphier-efuse.c
new file mode 100644
index 000000000..85f9372fb
--- /dev/null
+++ b/drivers/nvmem/uniphier-efuse.c
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * UniPhier eFuse driver
+ *
+ * Copyright (C) 2017 Socionext Inc.
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+
+struct uniphier_efuse_priv {
+	void __iomem *base;
+};
+
+static int uniphier_reg_read(void *context,
+			     unsigned int reg, void *_val, size_t bytes)
+{
+	struct uniphier_efuse_priv *priv = context;
+	u8 *val = _val;
+	int offs;
+
+	for (offs = 0; offs < bytes; offs += sizeof(u8))
+		*val++ = readb(priv->base + reg + offs);
+
+	return 0;
+}
+
+static int uniphier_efuse_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct nvmem_device *nvmem;
+	struct nvmem_config econfig = {};
+	struct uniphier_efuse_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	econfig.stride = 1;
+	econfig.word_size = 1;
+	econfig.read_only = true;
+	econfig.reg_read = uniphier_reg_read;
+	econfig.size = resource_size(res);
+	econfig.priv = priv;
+	econfig.dev = dev;
+	econfig.add_legacy_fixed_of_cells = true;
+	nvmem = devm_nvmem_register(dev, &econfig);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id uniphier_efuse_of_match[] = {
+	{ .compatible = "socionext,uniphier-efuse",},
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, uniphier_efuse_of_match);
+
+static struct platform_driver uniphier_efuse_driver = {
+	.probe = uniphier_efuse_probe,
+	.driver = {
+		.name = "uniphier-efuse",
+		.of_match_table = uniphier_efuse_of_match,
+	},
+};
+module_platform_driver(uniphier_efuse_driver);
+
+MODULE_AUTHOR("Keiji Hayashibara <hayashibara.keiji@socionext.com>");
+MODULE_DESCRIPTION("UniPhier eFuse driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/vf610-ocotp.c b/drivers/nvmem/vf610-ocotp.c
new file mode 100644
index 000000000..ee9c61ae7
--- /dev/null
+++ b/drivers/nvmem/vf610-ocotp.c
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Toradex AG.
+ *
+ * Author: Sanchayan Maity <sanchayan.maity@toradex.com>
+ *
+ * Based on the barebox ocotp driver,
+ * Copyright (c) 2010 Baruch Siach <baruch@tkos.co.il>
+ *	Orex Computed Radiography
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* OCOTP Register Offsets */
+#define OCOTP_CTRL_REG				0x00
+#define OCOTP_CTRL_SET				0x04
+#define OCOTP_CTRL_CLR				0x08
+#define OCOTP_TIMING				0x10
+#define OCOTP_DATA				0x20
+#define OCOTP_READ_CTRL_REG			0x30
+#define OCOTP_READ_FUSE_DATA			0x40
+
+/* OCOTP Register bits and masks */
+#define OCOTP_CTRL_WR_UNLOCK			16
+#define OCOTP_CTRL_WR_UNLOCK_KEY		0x3E77
+#define OCOTP_CTRL_WR_UNLOCK_MASK		GENMASK(31, 16)
+#define OCOTP_CTRL_ADDR				0
+#define OCOTP_CTRL_ADDR_MASK			GENMASK(6, 0)
+#define OCOTP_CTRL_RELOAD_SHADOWS		BIT(10)
+#define OCOTP_CTRL_ERR				BIT(9)
+#define OCOTP_CTRL_BUSY				BIT(8)
+
+#define OCOTP_TIMING_STROBE_READ		16
+#define OCOTP_TIMING_STROBE_READ_MASK		GENMASK(21, 16)
+#define OCOTP_TIMING_RELAX			12
+#define OCOTP_TIMING_RELAX_MASK			GENMASK(15, 12)
+#define OCOTP_TIMING_STROBE_PROG		0
+#define OCOTP_TIMING_STROBE_PROG_MASK		GENMASK(11, 0)
+
+#define OCOTP_READ_CTRL_READ_FUSE		0x1
+
+#define VF610_OCOTP_TIMEOUT			100000
+
+#define BF(value, field)		(((value) << field) & field##_MASK)
+
+#define DEF_RELAX				20
+
+static const int base_to_fuse_addr_mappings[][2] = {
+	{0x400, 0x00},
+	{0x410, 0x01},
+	{0x420, 0x02},
+	{0x450, 0x05},
+	{0x4F0, 0x0F},
+	{0x600, 0x20},
+	{0x610, 0x21},
+	{0x620, 0x22},
+	{0x630, 0x23},
+	{0x640, 0x24},
+	{0x650, 0x25},
+	{0x660, 0x26},
+	{0x670, 0x27},
+	{0x6F0, 0x2F},
+	{0x880, 0x38},
+	{0x890, 0x39},
+	{0x8A0, 0x3A},
+	{0x8B0, 0x3B},
+	{0x8C0, 0x3C},
+	{0x8D0, 0x3D},
+	{0x8E0, 0x3E},
+	{0x8F0, 0x3F},
+	{0xC80, 0x78},
+	{0xC90, 0x79},
+	{0xCA0, 0x7A},
+	{0xCB0, 0x7B},
+	{0xCC0, 0x7C},
+	{0xCD0, 0x7D},
+	{0xCE0, 0x7E},
+	{0xCF0, 0x7F},
+};
+
+struct vf610_ocotp {
+	void __iomem *base;
+	struct clk *clk;
+	struct device *dev;
+	struct nvmem_device *nvmem;
+	int timing;
+};
+
+static int vf610_ocotp_wait_busy(void __iomem *base)
+{
+	int timeout = VF610_OCOTP_TIMEOUT;
+
+	while ((readl(base) & OCOTP_CTRL_BUSY) && --timeout)
+		udelay(10);
+
+	if (!timeout) {
+		writel(OCOTP_CTRL_ERR, base + OCOTP_CTRL_CLR);
+		return -ETIMEDOUT;
+	}
+
+	udelay(10);
+
+	return 0;
+}
+
+static int vf610_ocotp_calculate_timing(struct vf610_ocotp *ocotp_dev)
+{
+	u32 clk_rate;
+	u32 relax, strobe_read, strobe_prog;
+	u32 timing;
+
+	clk_rate = clk_get_rate(ocotp_dev->clk);
+
+	/* Refer section OTP read/write timing parameters in TRM */
+	relax = clk_rate / (1000000000 / DEF_RELAX) - 1;
+	strobe_prog = clk_rate / (1000000000 / 10000) + 2 * (DEF_RELAX + 1) - 1;
+	strobe_read = clk_rate / (1000000000 / 40) + 2 * (DEF_RELAX + 1) - 1;
+
+	timing = BF(relax, OCOTP_TIMING_RELAX);
+	timing |= BF(strobe_read, OCOTP_TIMING_STROBE_READ);
+	timing |= BF(strobe_prog, OCOTP_TIMING_STROBE_PROG);
+
+	return timing;
+}
+
+static int vf610_get_fuse_address(int base_addr_offset)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(base_to_fuse_addr_mappings); i++) {
+		if (base_to_fuse_addr_mappings[i][0] == base_addr_offset)
+			return base_to_fuse_addr_mappings[i][1];
+	}
+
+	return -EINVAL;
+}
+
+static int vf610_ocotp_read(void *context, unsigned int offset,
+			void *val, size_t bytes)
+{
+	struct vf610_ocotp *ocotp = context;
+	void __iomem *base = ocotp->base;
+	u32 reg, *buf = val;
+	int fuse_addr;
+	int ret;
+
+	while (bytes > 0) {
+		fuse_addr = vf610_get_fuse_address(offset);
+		if (fuse_addr > 0) {
+			writel(ocotp->timing, base + OCOTP_TIMING);
+			ret = vf610_ocotp_wait_busy(base + OCOTP_CTRL_REG);
+			if (ret)
+				return ret;
+
+			reg = readl(base + OCOTP_CTRL_REG);
+			reg &= ~OCOTP_CTRL_ADDR_MASK;
+			reg &= ~OCOTP_CTRL_WR_UNLOCK_MASK;
+			reg |= BF(fuse_addr, OCOTP_CTRL_ADDR);
+			writel(reg, base + OCOTP_CTRL_REG);
+
+			writel(OCOTP_READ_CTRL_READ_FUSE,
+				base + OCOTP_READ_CTRL_REG);
+			ret = vf610_ocotp_wait_busy(base + OCOTP_CTRL_REG);
+			if (ret)
+				return ret;
+
+			if (readl(base) & OCOTP_CTRL_ERR) {
+				dev_dbg(ocotp->dev, "Error reading from fuse address %x\n",
+					fuse_addr);
+				writel(OCOTP_CTRL_ERR, base + OCOTP_CTRL_CLR);
+			}
+
+			/*
+			 * In case of error, we do not abort and expect to read
+			 * 0xBADABADA as mentioned by the TRM. We just read this
+			 * value and return.
+			 */
+			*buf = readl(base + OCOTP_READ_FUSE_DATA);
+		} else {
+			*buf = 0;
+		}
+
+		buf++;
+		bytes -= 4;
+		offset += 4;
+	}
+
+	return 0;
+}
+
+static struct nvmem_config ocotp_config = {
+	.name = "ocotp",
+	.stride = 4,
+	.word_size = 4,
+	.reg_read = vf610_ocotp_read,
+};
+
+static const struct of_device_id ocotp_of_match[] = {
+	{ .compatible = "fsl,vf610-ocotp", },
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, ocotp_of_match);
+
+static int vf610_ocotp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct vf610_ocotp *ocotp_dev;
+
+	ocotp_dev = devm_kzalloc(dev, sizeof(struct vf610_ocotp), GFP_KERNEL);
+	if (!ocotp_dev)
+		return -ENOMEM;
+
+	ocotp_dev->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(ocotp_dev->base))
+		return PTR_ERR(ocotp_dev->base);
+
+	ocotp_dev->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(ocotp_dev->clk)) {
+		dev_err(dev, "failed getting clock, err = %ld\n",
+			PTR_ERR(ocotp_dev->clk));
+		return PTR_ERR(ocotp_dev->clk);
+	}
+	ocotp_dev->dev = dev;
+	ocotp_dev->timing = vf610_ocotp_calculate_timing(ocotp_dev);
+
+	ocotp_config.size = resource_size(res);
+	ocotp_config.priv = ocotp_dev;
+	ocotp_config.dev = dev;
+
+	ocotp_dev->nvmem = devm_nvmem_register(dev, &ocotp_config);
+
+	return PTR_ERR_OR_ZERO(ocotp_dev->nvmem);
+}
+
+static struct platform_driver vf610_ocotp_driver = {
+	.probe = vf610_ocotp_probe,
+	.driver = {
+		.name = "vf610-ocotp",
+		.of_match_table = ocotp_of_match,
+	},
+};
+module_platform_driver(vf610_ocotp_driver);
+MODULE_AUTHOR("Sanchayan Maity <sanchayan.maity@toradex.com>");
+MODULE_DESCRIPTION("Vybrid OCOTP driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/zynqmp_nvmem.c b/drivers/nvmem/zynqmp_nvmem.c
new file mode 100644
index 000000000..d297ff150
--- /dev/null
+++ b/drivers/nvmem/zynqmp_nvmem.c
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Xilinx, Inc.
+ * Copyright (C) 2022 - 2023, Advanced Micro Devices, Inc.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/firmware/xlnx-zynqmp.h>
+
+#define SILICON_REVISION_MASK 0xF
+#define P_USER_0_64_UPPER_MASK	GENMASK(31, 16)
+#define P_USER_127_LOWER_4_BIT_MASK GENMASK(3, 0)
+#define WORD_INBYTES		4
+#define SOC_VER_SIZE		0x4
+#define EFUSE_MEMORY_SIZE	0x177
+#define UNUSED_SPACE		0x8
+#define ZYNQMP_NVMEM_SIZE	(SOC_VER_SIZE + UNUSED_SPACE + \
+				 EFUSE_MEMORY_SIZE)
+#define SOC_VERSION_OFFSET	0x0
+#define EFUSE_START_OFFSET	0xC
+#define EFUSE_END_OFFSET	0xFC
+#define EFUSE_PUF_START_OFFSET	0x100
+#define EFUSE_PUF_MID_OFFSET	0x140
+#define EFUSE_PUF_END_OFFSET	0x17F
+#define EFUSE_NOT_ENABLED	29
+
+/*
+ * efuse access type
+ */
+enum efuse_access {
+	EFUSE_READ = 0,
+	EFUSE_WRITE
+};
+
+/**
+ * struct xilinx_efuse - the basic structure
+ * @src:	address of the buffer to store the data to be write/read
+ * @size:	read/write word count
+ * @offset:	read/write offset
+ * @flag:	0 - represents efuse read and 1- represents efuse write
+ * @pufuserfuse:0 - represents non-puf efuses, offset is used for read/write
+ *		1 - represents puf user fuse row number.
+ *
+ * this structure stores all the required details to
+ * read/write efuse memory.
+ */
+struct xilinx_efuse {
+	u64 src;
+	u32 size;
+	u32 offset;
+	enum efuse_access flag;
+	u32 pufuserfuse;
+};
+
+static int zynqmp_efuse_access(void *context, unsigned int offset,
+			       void *val, size_t bytes, enum efuse_access flag,
+			       unsigned int pufflag)
+{
+	struct device *dev = context;
+	struct xilinx_efuse *efuse;
+	dma_addr_t dma_addr;
+	dma_addr_t dma_buf;
+	size_t words = bytes / WORD_INBYTES;
+	int ret;
+	unsigned int value;
+	char *data;
+
+	if (bytes % WORD_INBYTES != 0) {
+		dev_err(dev, "Bytes requested should be word aligned\n");
+		return -EOPNOTSUPP;
+	}
+
+	if (pufflag == 0 && offset % WORD_INBYTES) {
+		dev_err(dev, "Offset requested should be word aligned\n");
+		return -EOPNOTSUPP;
+	}
+
+	if (pufflag == 1 && flag == EFUSE_WRITE) {
+		memcpy(&value, val, sizeof(value));
+		if ((offset == EFUSE_PUF_START_OFFSET ||
+		     offset == EFUSE_PUF_MID_OFFSET) &&
+		    value & P_USER_0_64_UPPER_MASK) {
+			dev_err(dev, "Only lower 4 bytes are allowed to be programmed in P_USER_0 & P_USER_64\n");
+			return -EOPNOTSUPP;
+		}
+
+		if (offset == EFUSE_PUF_END_OFFSET &&
+		    (value & P_USER_127_LOWER_4_BIT_MASK)) {
+			dev_err(dev, "Only MSB 28 bits are allowed to be programmed for P_USER_127\n");
+			return -EOPNOTSUPP;
+		}
+	}
+
+	efuse = dma_alloc_coherent(dev, sizeof(struct xilinx_efuse),
+				   &dma_addr, GFP_KERNEL);
+	if (!efuse)
+		return -ENOMEM;
+
+	data = dma_alloc_coherent(dev, bytes,
+				  &dma_buf, GFP_KERNEL);
+	if (!data) {
+		ret = -ENOMEM;
+		goto efuse_data_fail;
+	}
+
+	if (flag == EFUSE_WRITE) {
+		memcpy(data, val, bytes);
+		efuse->flag = EFUSE_WRITE;
+	} else {
+		efuse->flag = EFUSE_READ;
+	}
+
+	efuse->src = dma_buf;
+	efuse->size = words;
+	efuse->offset = offset;
+	efuse->pufuserfuse = pufflag;
+
+	zynqmp_pm_efuse_access(dma_addr, (u32 *)&ret);
+	if (ret != 0) {
+		if (ret == EFUSE_NOT_ENABLED) {
+			dev_err(dev, "efuse access is not enabled\n");
+			ret = -EOPNOTSUPP;
+		} else {
+			dev_err(dev, "Error in efuse read %x\n", ret);
+			ret = -EPERM;
+		}
+		goto efuse_access_err;
+	}
+
+	if (flag == EFUSE_READ)
+		memcpy(val, data, bytes);
+efuse_access_err:
+	dma_free_coherent(dev, bytes,
+			  data, dma_buf);
+efuse_data_fail:
+	dma_free_coherent(dev, sizeof(struct xilinx_efuse),
+			  efuse, dma_addr);
+
+	return ret;
+}
+
+static int zynqmp_nvmem_read(void *context, unsigned int offset, void *val, size_t bytes)
+{
+	struct device *dev = context;
+	int ret;
+	int pufflag = 0;
+	int idcode;
+	int version;
+
+	if (offset >= EFUSE_PUF_START_OFFSET && offset <= EFUSE_PUF_END_OFFSET)
+		pufflag = 1;
+
+	switch (offset) {
+	/* Soc version offset is zero */
+	case SOC_VERSION_OFFSET:
+		if (bytes != SOC_VER_SIZE)
+			return -EOPNOTSUPP;
+
+		ret = zynqmp_pm_get_chipid((u32 *)&idcode, (u32 *)&version);
+		if (ret < 0)
+			return ret;
+
+		dev_dbg(dev, "Read chipid val %x %x\n", idcode, version);
+		*(int *)val = version & SILICON_REVISION_MASK;
+		break;
+	/* Efuse offset starts from 0xc */
+	case EFUSE_START_OFFSET ... EFUSE_END_OFFSET:
+	case EFUSE_PUF_START_OFFSET ... EFUSE_PUF_END_OFFSET:
+		ret = zynqmp_efuse_access(context, offset, val,
+					  bytes, EFUSE_READ, pufflag);
+		break;
+	default:
+		*(u32 *)val = 0xDEADBEEF;
+		ret = 0;
+		break;
+	}
+
+	return ret;
+}
+
+static int zynqmp_nvmem_write(void *context,
+			      unsigned int offset, void *val, size_t bytes)
+{
+	int pufflag = 0;
+
+	if (offset < EFUSE_START_OFFSET || offset > EFUSE_PUF_END_OFFSET)
+		return -EOPNOTSUPP;
+
+	if (offset >= EFUSE_PUF_START_OFFSET && offset <= EFUSE_PUF_END_OFFSET)
+		pufflag = 1;
+
+	return zynqmp_efuse_access(context, offset,
+				   val, bytes, EFUSE_WRITE, pufflag);
+}
+
+static const struct of_device_id zynqmp_nvmem_match[] = {
+	{ .compatible = "xlnx,zynqmp-nvmem-fw", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, zynqmp_nvmem_match);
+
+static int zynqmp_nvmem_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct nvmem_config econfig = {};
+
+	econfig.name = "zynqmp-nvmem";
+	econfig.owner = THIS_MODULE;
+	econfig.word_size = 1;
+	econfig.size = ZYNQMP_NVMEM_SIZE;
+	econfig.dev = dev;
+	econfig.priv = dev;
+	econfig.add_legacy_fixed_of_cells = true;
+	econfig.reg_read = zynqmp_nvmem_read;
+	econfig.reg_write = zynqmp_nvmem_write;
+
+	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &econfig));
+}
+
+static struct platform_driver zynqmp_nvmem_driver = {
+	.probe = zynqmp_nvmem_probe,
+	.driver = {
+		.name = "zynqmp-nvmem",
+		.of_match_table = zynqmp_nvmem_match,
+	},
+};
+
+module_platform_driver(zynqmp_nvmem_driver);
+
+MODULE_AUTHOR("Michal Simek <michal.simek@amd.com>, Nava kishore Manne <nava.kishore.manne@amd.com>");
+MODULE_DESCRIPTION("ZynqMP NVMEM driver");
+MODULE_LICENSE("GPL");