iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 37 insertions, 0 deletions

diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
new file mode 100644
index 000000000..01745eca1
--- /dev/null
+++ b/drivers/mtd/maps/Makefile
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# linux/drivers/maps/Makefile
+#
+
+ifeq ($(CONFIG_MTD_COMPLEX_MAPPINGS),y)
+obj-$(CONFIG_MTD)		+= map_funcs.o
+endif
+
+# Chip mappings
+obj-$(CONFIG_MTD_CFI_FLAGADM)	+= cfi_flagadm.o
+obj-$(CONFIG_MTD_DC21285)	+= dc21285.o
+obj-$(CONFIG_MTD_L440GX)	+= l440gx.o
+obj-$(CONFIG_MTD_AMD76XROM)	+= amd76xrom.o
+obj-$(CONFIG_MTD_ESB2ROM)	+= esb2rom.o
+obj-$(CONFIG_MTD_ICHXROM)	+= ichxrom.o
+obj-$(CONFIG_MTD_CK804XROM)	+= ck804xrom.o
+obj-$(CONFIG_MTD_TSUNAMI)	+= tsunami_flash.o
+obj-$(CONFIG_MTD_PXA2XX)	+= pxa2xx-flash.o
+obj-$(CONFIG_MTD_PHYSMAP)	+= physmap.o
+physmap-y			:= physmap-core.o
+physmap-$(CONFIG_MTD_PHYSMAP_VERSATILE) += physmap-versatile.o
+physmap-$(CONFIG_MTD_PHYSMAP_GEMINI) += physmap-gemini.o
+physmap-$(CONFIG_MTD_PHYSMAP_IXP4XX) += physmap-ixp4xx.o
+obj-$(CONFIG_MTD_PISMO)		+= pismo.o
+obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
+obj-$(CONFIG_MTD_SA1100)	+= sa1100-flash.o
+obj-$(CONFIG_MTD_SBC_GXX)	+= sbc_gxx.o
+obj-$(CONFIG_MTD_SUN_UFLASH)	+= sun_uflash.o
+obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o
+obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
+obj-$(CONFIG_MTD_PCI)		+= pci.o
+obj-$(CONFIG_MTD_UCLINUX)	+= uclinux.o
+obj-$(CONFIG_MTD_SCB2_FLASH)	+= scb2_flash.o
+obj-$(CONFIG_MTD_PLATRAM)	+= plat-ram.o
+obj-$(CONFIG_MTD_VMU)		+= vmu-flash.o
+obj-$(CONFIG_MTD_LANTIQ)	+= lantiq-flash.o