From e24328974a88aa8541e94e8bb8dfa2ade1b3c45d Mon Sep 17 00:00:00 2001 From: Donggeun Yoo Date: Wed, 2 Sep 2026 00:21:26 +0900 Subject: iio: proximity: vl53l0x-i2c: claim direct mode for raw reads vl53l0x_read_raw() starts a single-shot ranging measurement and reads back the result. Once the triggered buffer is enabled the sensor runs in continuous mode and its data-ready interrupt is routed to the trigger, so a concurrent in_distance_raw read disturbs the streaming setup and never gets its completion, returning -ETIMEDOUT. The original submission claimed direct mode here, but it was dropped during review because the driver had no buffer support at the time [1]. Continuous (buffered) mode was later added without restoring the claim [2], reintroducing the conflict. Reject direct reads while buffered capture is active by claiming direct mode around the measurement, as the vl53l1x sibling already does. Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support") Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1] Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2] Signed-off-by: Donggeun Yoo Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/mtd/maps/Makefile | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 drivers/mtd/maps/Makefile (limited to 'drivers/mtd/maps/Makefile') diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile new file mode 100644 index 000000000..01745eca1 --- /dev/null +++ b/drivers/mtd/maps/Makefile @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# linux/drivers/maps/Makefile +# + +ifeq ($(CONFIG_MTD_COMPLEX_MAPPINGS),y) +obj-$(CONFIG_MTD) += map_funcs.o +endif + +# Chip mappings +obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o +obj-$(CONFIG_MTD_DC21285) += dc21285.o +obj-$(CONFIG_MTD_L440GX) += l440gx.o +obj-$(CONFIG_MTD_AMD76XROM) += amd76xrom.o +obj-$(CONFIG_MTD_ESB2ROM) += esb2rom.o +obj-$(CONFIG_MTD_ICHXROM) += ichxrom.o +obj-$(CONFIG_MTD_CK804XROM) += ck804xrom.o +obj-$(CONFIG_MTD_TSUNAMI) += tsunami_flash.o +obj-$(CONFIG_MTD_PXA2XX) += pxa2xx-flash.o +obj-$(CONFIG_MTD_PHYSMAP) += physmap.o +physmap-y := physmap-core.o +physmap-$(CONFIG_MTD_PHYSMAP_VERSATILE) += physmap-versatile.o +physmap-$(CONFIG_MTD_PHYSMAP_GEMINI) += physmap-gemini.o +physmap-$(CONFIG_MTD_PHYSMAP_IXP4XX) += physmap-ixp4xx.o +obj-$(CONFIG_MTD_PISMO) += pismo.o +obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o +obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o +obj-$(CONFIG_MTD_SBC_GXX) += sbc_gxx.o +obj-$(CONFIG_MTD_SUN_UFLASH) += sun_uflash.o +obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o +obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o +obj-$(CONFIG_MTD_PCI) += pci.o +obj-$(CONFIG_MTD_UCLINUX) += uclinux.o +obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o +obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o +obj-$(CONFIG_MTD_VMU) += vmu-flash.o +obj-$(CONFIG_MTD_LANTIQ) += lantiq-flash.o -- cgit v1.3.1