Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 162 insertions, 0 deletions

diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig
new file mode 100644
index 000000000..a5f5e2502
--- /dev/null
+++ b/drivers/firewire/Kconfig
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "IEEE 1394 (FireWire) support"
+	depends on PCI || COMPILE_TEST
+	# firewire-core does not depend on PCI but is
+	# not useful without PCI controller driver
+
+config FIREWIRE
+	tristate "FireWire driver stack"
+	select CRC_ITU_T
+	help
+	  This is the new-generation IEEE 1394 (FireWire) driver stack
+	  a.k.a. Juju, a new implementation designed for robustness and
+	  simplicity.
+	  See http://ieee1394.docs.kernel.org/en/latest/migration.html
+	  for information about migration from the older Linux 1394 stack
+	  to the new driver stack.
+
+	  To compile this driver as a module, say M here: the module will be
+	  called firewire-core.
+
+config FIREWIRE_KUNIT_UAPI_TEST
+	tristate "KUnit tests for layout of structure in UAPI" if !KUNIT_ALL_TESTS
+	depends on FIREWIRE && KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the KUnit tests whether structures exposed to user
+	  space have expected layout.
+
+	  KUnit tests run during boot and output the results to the debug
+	  log in TAP format (https://testanything.org/). Only useful for
+	  kernel devs running KUnit test harness and are not for inclusion
+	  into a production build.
+
+	  For more information on KUnit and unit tests in general, refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+config FIREWIRE_KUNIT_DEVICE_ATTRIBUTE_TEST
+	tristate "KUnit tests for device attributes" if !KUNIT_ALL_TESTS
+	depends on FIREWIRE && KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the KUnit tests for device attribute for node and
+	  unit.
+
+	  KUnit tests run during boot and output the results to the debug
+	  log in TAP format (https://testanything.org/). Only useful for
+	  kernel devs running KUnit test harness and are not for inclusion
+	  into a production build.
+
+	  For more information on KUnit and unit tests in general, refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+config FIREWIRE_KUNIT_PACKET_SERDES_TEST
+	tristate "KUnit tests for packet serialization/deserialization" if !KUNIT_ALL_TESTS
+	depends on FIREWIRE && KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the KUnit tests for packet serialization and
+	  deserialization.
+
+	  KUnit tests run during boot and output the results to the debug
+	  log in TAP format (https://testanything.org/). Only useful for
+	  kernel devs running KUnit test harness and are not for inclusion
+	  into a production build.
+
+	  For more information on KUnit and unit tests in general, refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+config FIREWIRE_KUNIT_SELF_ID_SEQUENCE_HELPER_TEST
+	tristate "KUnit tests for helpers of self ID sequence" if !KUNIT_ALL_TESTS
+	depends on FIREWIRE && KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the KUnit tests for helpers of self ID sequence.
+
+	  KUnit tests run during boot and output the results to the debug
+	  log in TAP format (https://testanything.org/). Only useful for
+	  kernel devs running KUnit test harness and are not for inclusion
+	  into a production build.
+
+	  For more information on KUnit and unit tests in general, refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+config FIREWIRE_OHCI
+	tristate "OHCI-1394 controllers"
+	depends on PCI && FIREWIRE
+	help
+	  Enable this driver if you have a FireWire controller based
+	  on the OHCI specification.  For all practical purposes, this
+	  is the only chipset in use, so say Y here.
+
+	  To compile this driver as a module, say M here:  The module will be
+	  called firewire-ohci.
+
+config FIREWIRE_KUNIT_OHCI_SERDES_TEST
+	tristate "KUnit tests for serialization/deserialization of data in buffers/registers" if !KUNIT_ALL_TESTS
+	depends on FIREWIRE && KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the KUnit tests to check serialization and deserialization
+	  of data in buffers and registers defined in 1394 OHCI specification.
+
+	  KUnit tests run during boot and output the results to the debug
+	  log in TAP format (https://testanything.org/). Only useful for
+	  kernel devs running KUnit test harness and are not for inclusion
+	  into a production build.
+
+	  For more information on KUnit and unit tests in general, refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+config FIREWIRE_SBP2
+	tristate "Storage devices (SBP-2 protocol)"
+	depends on FIREWIRE && SCSI
+	help
+	  This option enables you to use SBP-2 devices connected to a
+	  FireWire bus.  SBP-2 devices include storage devices like
+	  harddisks and DVD drives, also some other FireWire devices
+	  like scanners.
+
+	  To compile this driver as a module, say M here:  The module will be
+	  called firewire-sbp2.
+
+	  You should also enable support for disks, CD-ROMs, etc. in the SCSI
+	  configuration section.
+
+config FIREWIRE_NET
+	tristate "IP networking over 1394"
+	depends on FIREWIRE && INET
+	help
+	  This enables IPv4/IPv6 over IEEE 1394, providing IP connectivity
+	  with other implementations of RFC 2734/3146 as found on several
+	  operating systems.  Multicast support is currently limited.
+
+	  To compile this driver as a module, say M here:  The module will be
+	  called firewire-net.
+
+config FIREWIRE_NOSY
+	tristate "Nosy - a FireWire traffic sniffer for PCILynx cards"
+	depends on PCI
+	help
+	  Nosy is an IEEE 1394 packet sniffer that is used for protocol
+	  analysis and in development of IEEE 1394 drivers, applications,
+	  or firmwares.
+
+	  This driver lets you use a Texas Instruments PCILynx 1394 to PCI
+	  link layer controller TSB12LV21/A/B as a low-budget bus analyzer.
+	  PCILynx is a nowadays very rare IEEE 1394 controller which is
+	  not OHCI 1394 compliant.
+
+	  The following cards are known to be based on PCILynx or PCILynx-2:
+	  IOI IOI-1394TT (PCI card), Unibrain Fireboard 400 PCI Lynx-2
+	  (PCI card), Newer Technology FireWire 2 Go (CardBus card),
+	  Apple Power Mac G3 blue & white and G4 with PCI graphics
+	  (onboard controller).
+
+	  To compile this driver as a module, say M here:  The module will be
+	  called nosy.  Source code of a userspace interface to nosy, called
+	  nosy-dump, can be found in tools/firewire/ of the kernel sources.
+
+	  If unsure, say N.
+
+endmenu