From f4cdf7ca9a1fdcca413157df19753f388a5a224e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 19 Aug 2026 10:09:22 -0700 Subject: Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - v4l2-core: added ISP statistics support and per-block validation - v4l2-core: Allow unknown HDR10 white point and luminance - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor - New codec: Milos: VPU v2.0 codec support - isp driver: gained support for Dreamchip RPPX1 ISP framework - vsp1 driver: gained support for RZ/T2H and RZ/N2H - Novalake driver: gained CVS support for new NVL hardware - dvb-core: fix feed leak on failed DMX_ADD_PID - several driver fixes, cleanups and minor improvements * tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits) media: ipu-bridge: check all DMI entries when overriding sensor rotation media: v4l2-async: avoid deleting unlinked ASC entry on link error media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement media: intel/ipu6: fix async notifier cleanup leak on parse error media: staging/ipu7: fix async notifier UAF on probe error path media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem() media: rcar-isp: Fix VSPX reference leaks media: rcar-isp: Release ISPCORE resources media: i2c: imx415: Release runtime PM reference on VBLANK error media: i2c: imx415: Return test pattern write errors media: renesas: vsp1: Declare index variables in for loop statement media: renesas: vsp1: Make reset control optional to support platforms without a reset line media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs media: nxp: imx8-isi: Add additional 32-bit RGB format support media: nxp: imx8-isi: Add 16-bit raw Bayer format support media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks media: nxp: imx8-isi: Correct color map between V4L2 and ISI ... --- drivers/firewire/Kconfig | 162 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 162 insertions(+) create mode 100644 drivers/firewire/Kconfig (limited to 'drivers/firewire/Kconfig') diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig new file mode 100644 index 000000000..a5f5e2502 --- /dev/null +++ b/drivers/firewire/Kconfig @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: GPL-2.0-only +menu "IEEE 1394 (FireWire) support" + depends on PCI || COMPILE_TEST + # firewire-core does not depend on PCI but is + # not useful without PCI controller driver + +config FIREWIRE + tristate "FireWire driver stack" + select CRC_ITU_T + help + This is the new-generation IEEE 1394 (FireWire) driver stack + a.k.a. Juju, a new implementation designed for robustness and + simplicity. + See http://ieee1394.docs.kernel.org/en/latest/migration.html + for information about migration from the older Linux 1394 stack + to the new driver stack. + + To compile this driver as a module, say M here: the module will be + called firewire-core. + +config FIREWIRE_KUNIT_UAPI_TEST + tristate "KUnit tests for layout of structure in UAPI" if !KUNIT_ALL_TESTS + depends on FIREWIRE && KUNIT + default KUNIT_ALL_TESTS + help + This builds the KUnit tests whether structures exposed to user + space have expected layout. + + KUnit tests run during boot and output the results to the debug + log in TAP format (https://testanything.org/). Only useful for + kernel devs running KUnit test harness and are not for inclusion + into a production build. + + For more information on KUnit and unit tests in general, refer + to the KUnit documentation in Documentation/dev-tools/kunit/. + +config FIREWIRE_KUNIT_DEVICE_ATTRIBUTE_TEST + tristate "KUnit tests for device attributes" if !KUNIT_ALL_TESTS + depends on FIREWIRE && KUNIT + default KUNIT_ALL_TESTS + help + This builds the KUnit tests for device attribute for node and + unit. + + KUnit tests run during boot and output the results to the debug + log in TAP format (https://testanything.org/). Only useful for + kernel devs running KUnit test harness and are not for inclusion + into a production build. + + For more information on KUnit and unit tests in general, refer + to the KUnit documentation in Documentation/dev-tools/kunit/. + +config FIREWIRE_KUNIT_PACKET_SERDES_TEST + tristate "KUnit tests for packet serialization/deserialization" if !KUNIT_ALL_TESTS + depends on FIREWIRE && KUNIT + default KUNIT_ALL_TESTS + help + This builds the KUnit tests for packet serialization and + deserialization. + + KUnit tests run during boot and output the results to the debug + log in TAP format (https://testanything.org/). Only useful for + kernel devs running KUnit test harness and are not for inclusion + into a production build. + + For more information on KUnit and unit tests in general, refer + to the KUnit documentation in Documentation/dev-tools/kunit/. + +config FIREWIRE_KUNIT_SELF_ID_SEQUENCE_HELPER_TEST + tristate "KUnit tests for helpers of self ID sequence" if !KUNIT_ALL_TESTS + depends on FIREWIRE && KUNIT + default KUNIT_ALL_TESTS + help + This builds the KUnit tests for helpers of self ID sequence. + + KUnit tests run during boot and output the results to the debug + log in TAP format (https://testanything.org/). Only useful for + kernel devs running KUnit test harness and are not for inclusion + into a production build. + + For more information on KUnit and unit tests in general, refer + to the KUnit documentation in Documentation/dev-tools/kunit/. + +config FIREWIRE_OHCI + tristate "OHCI-1394 controllers" + depends on PCI && FIREWIRE + help + Enable this driver if you have a FireWire controller based + on the OHCI specification. For all practical purposes, this + is the only chipset in use, so say Y here. + + To compile this driver as a module, say M here: The module will be + called firewire-ohci. + +config FIREWIRE_KUNIT_OHCI_SERDES_TEST + tristate "KUnit tests for serialization/deserialization of data in buffers/registers" if !KUNIT_ALL_TESTS + depends on FIREWIRE && KUNIT + default KUNIT_ALL_TESTS + help + This builds the KUnit tests to check serialization and deserialization + of data in buffers and registers defined in 1394 OHCI specification. + + KUnit tests run during boot and output the results to the debug + log in TAP format (https://testanything.org/). Only useful for + kernel devs running KUnit test harness and are not for inclusion + into a production build. + + For more information on KUnit and unit tests in general, refer + to the KUnit documentation in Documentation/dev-tools/kunit/. + +config FIREWIRE_SBP2 + tristate "Storage devices (SBP-2 protocol)" + depends on FIREWIRE && SCSI + help + This option enables you to use SBP-2 devices connected to a + FireWire bus. SBP-2 devices include storage devices like + harddisks and DVD drives, also some other FireWire devices + like scanners. + + To compile this driver as a module, say M here: The module will be + called firewire-sbp2. + + You should also enable support for disks, CD-ROMs, etc. in the SCSI + configuration section. + +config FIREWIRE_NET + tristate "IP networking over 1394" + depends on FIREWIRE && INET + help + This enables IPv4/IPv6 over IEEE 1394, providing IP connectivity + with other implementations of RFC 2734/3146 as found on several + operating systems. Multicast support is currently limited. + + To compile this driver as a module, say M here: The module will be + called firewire-net. + +config FIREWIRE_NOSY + tristate "Nosy - a FireWire traffic sniffer for PCILynx cards" + depends on PCI + help + Nosy is an IEEE 1394 packet sniffer that is used for protocol + analysis and in development of IEEE 1394 drivers, applications, + or firmwares. + + This driver lets you use a Texas Instruments PCILynx 1394 to PCI + link layer controller TSB12LV21/A/B as a low-budget bus analyzer. + PCILynx is a nowadays very rare IEEE 1394 controller which is + not OHCI 1394 compliant. + + The following cards are known to be based on PCILynx or PCILynx-2: + IOI IOI-1394TT (PCI card), Unibrain Fireboard 400 PCI Lynx-2 + (PCI card), Newer Technology FireWire 2 Go (CardBus card), + Apple Power Mac G3 blue & white and G4 with PCI graphics + (onboard controller). + + To compile this driver as a module, say M here: The module will be + called nosy. Source code of a userspace interface to nosy, called + nosy-dump, can be found in tools/firewire/ of the kernel sources. + + If unsure, say N. + +endmenu -- cgit v1.3.1