Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 177 insertions, 0 deletions

diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig
new file mode 100644
index 000000000..b5abe00ac
--- /dev/null
+++ b/drivers/firewire/Kconfig
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "IEEE 1394 (FireWire) support"
+	depends on PCI || COMPILE_TEST
+	# firewire-core does not depend on PCI but is
+	# not useful without PCI controller driver
+
+config FIREWIRE
+	tristate "FireWire driver stack"
+	select CRC_ITU_T
+	help
+	  This is the new-generation IEEE 1394 (FireWire) driver stack
+	  a.k.a. Juju, a new implementation designed for robustness and
+	  simplicity.
+	  See http://ieee1394.docs.kernel.org/en/latest/migration.html
+	  for information about migration from the older Linux 1394 stack
+	  to the new driver stack.
+
+	  To compile this driver as a module, say M here: the module will be
+	  called firewire-core.
+
+config FIREWIRE_KUNIT_UAPI_TEST
+	tristate "KUnit tests for layout of structure in UAPI" if !KUNIT_ALL_TESTS
+	depends on FIREWIRE && KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the KUnit tests whether structures exposed to user
+	  space have expected layout.
+
+	  KUnit tests run during boot and output the results to the debug
+	  log in TAP format (https://testanything.org/). Only useful for
+	  kernel devs running KUnit test harness and are not for inclusion
+	  into a production build.
+
+	  For more information on KUnit and unit tests in general, refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+config FIREWIRE_KUNIT_DEVICE_ATTRIBUTE_TEST
+	tristate "KUnit tests for device attributes" if !KUNIT_ALL_TESTS
+	depends on FIREWIRE && KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the KUnit tests for device attribute for node and
+	  unit.
+
+	  KUnit tests run during boot and output the results to the debug
+	  log in TAP format (https://testanything.org/). Only useful for
+	  kernel devs running KUnit test harness and are not for inclusion
+	  into a production build.
+
+	  For more information on KUnit and unit tests in general, refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+config FIREWIRE_KUNIT_PACKET_SERDES_TEST
+	tristate "KUnit tests for packet serialization/deserialization" if !KUNIT_ALL_TESTS
+	depends on FIREWIRE && KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the KUnit tests for packet serialization and
+	  deserialization.
+
+	  KUnit tests run during boot and output the results to the debug
+	  log in TAP format (https://testanything.org/). Only useful for
+	  kernel devs running KUnit test harness and are not for inclusion
+	  into a production build.
+
+	  For more information on KUnit and unit tests in general, refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+config FIREWIRE_KUNIT_SELF_ID_SEQUENCE_HELPER_TEST
+	tristate "KUnit tests for helpers of self ID sequence" if !KUNIT_ALL_TESTS
+	depends on FIREWIRE && KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the KUnit tests for helpers of self ID sequence.
+
+	  KUnit tests run during boot and output the results to the debug
+	  log in TAP format (https://testanything.org/). Only useful for
+	  kernel devs running KUnit test harness and are not for inclusion
+	  into a production build.
+
+	  For more information on KUnit and unit tests in general, refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+config FIREWIRE_KUNIT_NODE_TREE_TEST
+	tristate "KUnit tests for node tree" if !KUNIT_ALL_TESTS
+	depends on FIREWIRE && KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the KUnit tests for node tree.
+
+	  KUnit tests run during boot and output the results to the debug
+	  log in TAP format (https://testanything.org/). Only useful for
+	  kernel devs running KUnit test harness and are not for inclusion
+	  into a production build.
+
+	  For more information on KUnit and unit tests in general, refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+config FIREWIRE_OHCI
+	tristate "OHCI-1394 controllers"
+	depends on PCI && FIREWIRE
+	help
+	  Enable this driver if you have a FireWire controller based
+	  on the OHCI specification.  For all practical purposes, this
+	  is the only chipset in use, so say Y here.
+
+	  To compile this driver as a module, say M here:  The module will be
+	  called firewire-ohci.
+
+config FIREWIRE_KUNIT_OHCI_SERDES_TEST
+	tristate "KUnit tests for serialization/deserialization of data in buffers/registers" if !KUNIT_ALL_TESTS
+	depends on FIREWIRE && KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the KUnit tests to check serialization and deserialization
+	  of data in buffers and registers defined in 1394 OHCI specification.
+
+	  KUnit tests run during boot and output the results to the debug
+	  log in TAP format (https://testanything.org/). Only useful for
+	  kernel devs running KUnit test harness and are not for inclusion
+	  into a production build.
+
+	  For more information on KUnit and unit tests in general, refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+config FIREWIRE_SBP2
+	tristate "Storage devices (SBP-2 protocol)"
+	depends on FIREWIRE && SCSI
+	help
+	  This option enables you to use SBP-2 devices connected to a
+	  FireWire bus.  SBP-2 devices include storage devices like
+	  harddisks and DVD drives, also some other FireWire devices
+	  like scanners.
+
+	  To compile this driver as a module, say M here:  The module will be
+	  called firewire-sbp2.
+
+	  You should also enable support for disks, CD-ROMs, etc. in the SCSI
+	  configuration section.
+
+config FIREWIRE_NET
+	tristate "IP networking over 1394"
+	depends on FIREWIRE && INET
+	help
+	  This enables IPv4/IPv6 over IEEE 1394, providing IP connectivity
+	  with other implementations of RFC 2734/3146 as found on several
+	  operating systems.  Multicast support is currently limited.
+
+	  To compile this driver as a module, say M here:  The module will be
+	  called firewire-net.
+
+config FIREWIRE_NOSY
+	tristate "Nosy - a FireWire traffic sniffer for PCILynx cards"
+	depends on PCI
+	help
+	  Nosy is an IEEE 1394 packet sniffer that is used for protocol
+	  analysis and in development of IEEE 1394 drivers, applications,
+	  or firmwares.
+
+	  This driver lets you use a Texas Instruments PCILynx 1394 to PCI
+	  link layer controller TSB12LV21/A/B as a low-budget bus analyzer.
+	  PCILynx is a nowadays very rare IEEE 1394 controller which is
+	  not OHCI 1394 compliant.
+
+	  The following cards are known to be based on PCILynx or PCILynx-2:
+	  IOI IOI-1394TT (PCI card), Unibrain Fireboard 400 PCI Lynx-2
+	  (PCI card), Newer Technology FireWire 2 Go (CardBus card),
+	  Apple Power Mac G3 blue & white and G4 with PCI graphics
+	  (onboard controller).
+
+	  To compile this driver as a module, say M here:  The module will be
+	  called nosy.  Source code of a userspace interface to nosy, called
+	  nosy-dump, can be found in tools/firewire/ of the kernel sources.
+
+	  If unsure, say N.
+
+endmenu