From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- drivers/firewire/Kconfig | 177 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 177 insertions(+) create mode 100644 drivers/firewire/Kconfig (limited to 'drivers/firewire/Kconfig') diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig new file mode 100644 index 000000000..b5abe00ac --- /dev/null +++ b/drivers/firewire/Kconfig @@ -0,0 +1,177 @@ +# SPDX-License-Identifier: GPL-2.0-only +menu "IEEE 1394 (FireWire) support" + depends on PCI || COMPILE_TEST + # firewire-core does not depend on PCI but is + # not useful without PCI controller driver + +config FIREWIRE + tristate "FireWire driver stack" + select CRC_ITU_T + help + This is the new-generation IEEE 1394 (FireWire) driver stack + a.k.a. Juju, a new implementation designed for robustness and + simplicity. + See http://ieee1394.docs.kernel.org/en/latest/migration.html + for information about migration from the older Linux 1394 stack + to the new driver stack. + + To compile this driver as a module, say M here: the module will be + called firewire-core. + +config FIREWIRE_KUNIT_UAPI_TEST + tristate "KUnit tests for layout of structure in UAPI" if !KUNIT_ALL_TESTS + depends on FIREWIRE && KUNIT + default KUNIT_ALL_TESTS + help + This builds the KUnit tests whether structures exposed to user + space have expected layout. + + KUnit tests run during boot and output the results to the debug + log in TAP format (https://testanything.org/). Only useful for + kernel devs running KUnit test harness and are not for inclusion + into a production build. + + For more information on KUnit and unit tests in general, refer + to the KUnit documentation in Documentation/dev-tools/kunit/. + +config FIREWIRE_KUNIT_DEVICE_ATTRIBUTE_TEST + tristate "KUnit tests for device attributes" if !KUNIT_ALL_TESTS + depends on FIREWIRE && KUNIT + default KUNIT_ALL_TESTS + help + This builds the KUnit tests for device attribute for node and + unit. + + KUnit tests run during boot and output the results to the debug + log in TAP format (https://testanything.org/). Only useful for + kernel devs running KUnit test harness and are not for inclusion + into a production build. + + For more information on KUnit and unit tests in general, refer + to the KUnit documentation in Documentation/dev-tools/kunit/. + +config FIREWIRE_KUNIT_PACKET_SERDES_TEST + tristate "KUnit tests for packet serialization/deserialization" if !KUNIT_ALL_TESTS + depends on FIREWIRE && KUNIT + default KUNIT_ALL_TESTS + help + This builds the KUnit tests for packet serialization and + deserialization. + + KUnit tests run during boot and output the results to the debug + log in TAP format (https://testanything.org/). Only useful for + kernel devs running KUnit test harness and are not for inclusion + into a production build. + + For more information on KUnit and unit tests in general, refer + to the KUnit documentation in Documentation/dev-tools/kunit/. + +config FIREWIRE_KUNIT_SELF_ID_SEQUENCE_HELPER_TEST + tristate "KUnit tests for helpers of self ID sequence" if !KUNIT_ALL_TESTS + depends on FIREWIRE && KUNIT + default KUNIT_ALL_TESTS + help + This builds the KUnit tests for helpers of self ID sequence. + + KUnit tests run during boot and output the results to the debug + log in TAP format (https://testanything.org/). Only useful for + kernel devs running KUnit test harness and are not for inclusion + into a production build. + + For more information on KUnit and unit tests in general, refer + to the KUnit documentation in Documentation/dev-tools/kunit/. + +config FIREWIRE_KUNIT_NODE_TREE_TEST + tristate "KUnit tests for node tree" if !KUNIT_ALL_TESTS + depends on FIREWIRE && KUNIT + default KUNIT_ALL_TESTS + help + This builds the KUnit tests for node tree. + + KUnit tests run during boot and output the results to the debug + log in TAP format (https://testanything.org/). Only useful for + kernel devs running KUnit test harness and are not for inclusion + into a production build. + + For more information on KUnit and unit tests in general, refer + to the KUnit documentation in Documentation/dev-tools/kunit/. + +config FIREWIRE_OHCI + tristate "OHCI-1394 controllers" + depends on PCI && FIREWIRE + help + Enable this driver if you have a FireWire controller based + on the OHCI specification. For all practical purposes, this + is the only chipset in use, so say Y here. + + To compile this driver as a module, say M here: The module will be + called firewire-ohci. + +config FIREWIRE_KUNIT_OHCI_SERDES_TEST + tristate "KUnit tests for serialization/deserialization of data in buffers/registers" if !KUNIT_ALL_TESTS + depends on FIREWIRE && KUNIT + default KUNIT_ALL_TESTS + help + This builds the KUnit tests to check serialization and deserialization + of data in buffers and registers defined in 1394 OHCI specification. + + KUnit tests run during boot and output the results to the debug + log in TAP format (https://testanything.org/). Only useful for + kernel devs running KUnit test harness and are not for inclusion + into a production build. + + For more information on KUnit and unit tests in general, refer + to the KUnit documentation in Documentation/dev-tools/kunit/. + +config FIREWIRE_SBP2 + tristate "Storage devices (SBP-2 protocol)" + depends on FIREWIRE && SCSI + help + This option enables you to use SBP-2 devices connected to a + FireWire bus. SBP-2 devices include storage devices like + harddisks and DVD drives, also some other FireWire devices + like scanners. + + To compile this driver as a module, say M here: The module will be + called firewire-sbp2. + + You should also enable support for disks, CD-ROMs, etc. in the SCSI + configuration section. + +config FIREWIRE_NET + tristate "IP networking over 1394" + depends on FIREWIRE && INET + help + This enables IPv4/IPv6 over IEEE 1394, providing IP connectivity + with other implementations of RFC 2734/3146 as found on several + operating systems. Multicast support is currently limited. + + To compile this driver as a module, say M here: The module will be + called firewire-net. + +config FIREWIRE_NOSY + tristate "Nosy - a FireWire traffic sniffer for PCILynx cards" + depends on PCI + help + Nosy is an IEEE 1394 packet sniffer that is used for protocol + analysis and in development of IEEE 1394 drivers, applications, + or firmwares. + + This driver lets you use a Texas Instruments PCILynx 1394 to PCI + link layer controller TSB12LV21/A/B as a low-budget bus analyzer. + PCILynx is a nowadays very rare IEEE 1394 controller which is + not OHCI 1394 compliant. + + The following cards are known to be based on PCILynx or PCILynx-2: + IOI IOI-1394TT (PCI card), Unibrain Fireboard 400 PCI Lynx-2 + (PCI card), Newer Technology FireWire 2 Go (CardBus card), + Apple Power Mac G3 blue & white and G4 with PCI graphics + (onboard controller). + + To compile this driver as a module, say M here: The module will be + called nosy. Source code of a userspace interface to nosy, called + nosy-dump, can be found in tools/firewire/ of the kernel sources. + + If unsure, say N. + +endmenu -- cgit v1.3.1