Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 118 insertions, 0 deletions

diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
new file mode 100644
index 000000000..b9558ff20
--- /dev/null
+++ b/drivers/bcma/Kconfig
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0
+config BCMA_POSSIBLE
+	bool
+	depends on HAS_IOMEM && HAS_DMA
+	default y
+
+menuconfig BCMA
+	tristate "Broadcom specific AMBA"
+	depends on BCMA_POSSIBLE
+	help
+	  Bus driver for Broadcom specific Advanced Microcontroller Bus
+	  Architecture.
+
+if BCMA
+
+# Support for Block-I/O. SELECT this from the driver that needs it.
+config BCMA_BLOCKIO
+	bool
+
+config BCMA_HOST_PCI_POSSIBLE
+	bool
+	depends on PCI = y
+	default y
+
+config BCMA_HOST_PCI
+	bool "Support for BCMA on PCI-host bus"
+	depends on BCMA_HOST_PCI_POSSIBLE
+	select BCMA_DRIVER_PCI
+	default y
+
+config BCMA_HOST_SOC
+	bool "Support for BCMA in a SoC"
+	depends on HAS_IOMEM
+	help
+	  Host interface for a Broadcom AIX bus directly mapped into
+	  the memory. This only works with the Broadcom SoCs from the
+	  BCM47XX line.
+
+	  If unsure, say N
+
+config BCMA_DRIVER_PCI
+	bool "BCMA Broadcom PCI core driver"
+	depends on PCI
+	default y
+	help
+	  BCMA bus may have many versions of PCIe core. This driver
+	  supports:
+	  1) PCIe core working in clientmode
+	  2) PCIe Gen 2 clientmode core
+
+	  In general PCIe (Gen 2) clientmode core is required on PCIe
+	  hosted buses. It's responsible for initialization and basic
+	  hardware management.
+	  This driver is also prerequisite for a hostmode PCIe core
+	  support.
+
+config BCMA_DRIVER_PCI_HOSTMODE
+	bool "Driver for PCI core working in hostmode"
+	depends on MIPS && BCMA_DRIVER_PCI && PCI_DRIVERS_LEGACY && BCMA = y
+	help
+	  PCI core hostmode operation (external PCI bus).
+
+config BCMA_DRIVER_MIPS
+	bool "BCMA Broadcom MIPS core driver"
+	depends on MIPS || COMPILE_TEST
+	help
+	  Driver for the Broadcom MIPS core attached to Broadcom specific
+	  Advanced Microcontroller Bus.
+
+	  If unsure, say N
+
+config BCMA_PFLASH
+	bool
+	depends on BCMA_DRIVER_MIPS
+	default y
+
+config BCMA_SFLASH
+	bool "ChipCommon-attached serial flash support"
+	depends on BCMA_HOST_SOC
+	default y
+	help
+	  Some cheap devices have serial flash connected to the ChipCommon
+	  instead of independent SPI controller. It requires using a separated
+	  driver that implements ChipCommon specific interface communication.
+
+	  Enabling this symbol will let bcma recognize serial flash and register
+	  it as platform device.
+
+config BCMA_NFLASH
+	bool
+	depends on BCMA_DRIVER_MIPS
+	default y
+
+config BCMA_DRIVER_GMAC_CMN
+	bool "BCMA Broadcom GBIT MAC COMMON core driver"
+	help
+	  Driver for the Broadcom GBIT MAC COMMON core attached to Broadcom
+	  specific Advanced Microcontroller Bus.
+
+	  If unsure, say N
+
+config BCMA_DRIVER_GPIO
+	bool "BCMA GPIO driver"
+	depends on GPIOLIB
+	select GPIOLIB_IRQCHIP if BCMA_HOST_SOC
+	help
+	  Driver to provide access to the GPIO pins of the bcma bus.
+
+	  If unsure, say N
+
+config BCMA_DEBUG
+	bool "BCMA debugging"
+	help
+	  This turns on additional debugging messages.
+
+	  If unsure, say N
+
+endif # BCMA