From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- drivers/bcma/Kconfig | 118 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 118 insertions(+) create mode 100644 drivers/bcma/Kconfig (limited to 'drivers/bcma/Kconfig') diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig new file mode 100644 index 000000000..b9558ff20 --- /dev/null +++ b/drivers/bcma/Kconfig @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: GPL-2.0 +config BCMA_POSSIBLE + bool + depends on HAS_IOMEM && HAS_DMA + default y + +menuconfig BCMA + tristate "Broadcom specific AMBA" + depends on BCMA_POSSIBLE + help + Bus driver for Broadcom specific Advanced Microcontroller Bus + Architecture. + +if BCMA + +# Support for Block-I/O. SELECT this from the driver that needs it. +config BCMA_BLOCKIO + bool + +config BCMA_HOST_PCI_POSSIBLE + bool + depends on PCI = y + default y + +config BCMA_HOST_PCI + bool "Support for BCMA on PCI-host bus" + depends on BCMA_HOST_PCI_POSSIBLE + select BCMA_DRIVER_PCI + default y + +config BCMA_HOST_SOC + bool "Support for BCMA in a SoC" + depends on HAS_IOMEM + help + Host interface for a Broadcom AIX bus directly mapped into + the memory. This only works with the Broadcom SoCs from the + BCM47XX line. + + If unsure, say N + +config BCMA_DRIVER_PCI + bool "BCMA Broadcom PCI core driver" + depends on PCI + default y + help + BCMA bus may have many versions of PCIe core. This driver + supports: + 1) PCIe core working in clientmode + 2) PCIe Gen 2 clientmode core + + In general PCIe (Gen 2) clientmode core is required on PCIe + hosted buses. It's responsible for initialization and basic + hardware management. + This driver is also prerequisite for a hostmode PCIe core + support. + +config BCMA_DRIVER_PCI_HOSTMODE + bool "Driver for PCI core working in hostmode" + depends on MIPS && BCMA_DRIVER_PCI && PCI_DRIVERS_LEGACY && BCMA = y + help + PCI core hostmode operation (external PCI bus). + +config BCMA_DRIVER_MIPS + bool "BCMA Broadcom MIPS core driver" + depends on MIPS || COMPILE_TEST + help + Driver for the Broadcom MIPS core attached to Broadcom specific + Advanced Microcontroller Bus. + + If unsure, say N + +config BCMA_PFLASH + bool + depends on BCMA_DRIVER_MIPS + default y + +config BCMA_SFLASH + bool "ChipCommon-attached serial flash support" + depends on BCMA_HOST_SOC + default y + help + Some cheap devices have serial flash connected to the ChipCommon + instead of independent SPI controller. It requires using a separated + driver that implements ChipCommon specific interface communication. + + Enabling this symbol will let bcma recognize serial flash and register + it as platform device. + +config BCMA_NFLASH + bool + depends on BCMA_DRIVER_MIPS + default y + +config BCMA_DRIVER_GMAC_CMN + bool "BCMA Broadcom GBIT MAC COMMON core driver" + help + Driver for the Broadcom GBIT MAC COMMON core attached to Broadcom + specific Advanced Microcontroller Bus. + + If unsure, say N + +config BCMA_DRIVER_GPIO + bool "BCMA GPIO driver" + depends on GPIOLIB + select GPIOLIB_IRQCHIP if BCMA_HOST_SOC + help + Driver to provide access to the GPIO pins of the bcma bus. + + If unsure, say N + +config BCMA_DEBUG + bool "BCMA debugging" + help + This turns on additional debugging messages. + + If unsure, say N + +endif # BCMA -- cgit v1.3.1