Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 166 insertions, 0 deletions

diff --git a/drivers/acpi/thermal_lib.c b/drivers/acpi/thermal_lib.c
new file mode 100644
index 000000000..f81591927
--- /dev/null
+++ b/drivers/acpi/thermal_lib.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2023 Linaro Limited
+ * Copyright 2023 Intel Corporation
+ *
+ * Library routines for retrieving trip point temperature values from the
+ * platform firmware via ACPI.
+ */
+#include <linux/acpi.h>
+#include <linux/units.h>
+#include <linux/thermal.h>
+#include "internal.h"
+
+/*
+ * Minimum temperature for full military grade is 218°K (-55°C) and
+ * max temperature is 448°K (175°C). We can consider those values as
+ * the boundaries for the [trips] temperature returned by the
+ * firmware. Any values out of these boundaries may be considered
+ * bogus and we can assume the firmware has no data to provide.
+ */
+#define TEMP_MIN_DECIK	2180ULL
+#define TEMP_MAX_DECIK	4480ULL
+
+static int acpi_trip_temp(struct acpi_device *adev, char *obj_name,
+			  int *ret_temp)
+{
+	unsigned long long temp;
+	acpi_status status;
+
+	status = acpi_evaluate_integer(adev->handle, obj_name, NULL, &temp);
+	if (ACPI_FAILURE(status)) {
+		acpi_handle_debug(adev->handle, "%s evaluation failed\n", obj_name);
+		return -ENODATA;
+	}
+
+	if (temp >= TEMP_MIN_DECIK && temp <= TEMP_MAX_DECIK) {
+		*ret_temp = temp;
+	} else {
+		acpi_handle_debug(adev->handle, "%s result %llu out of range\n",
+				  obj_name, temp);
+		*ret_temp = THERMAL_TEMP_INVALID;
+	}
+
+	return 0;
+}
+
+int acpi_active_trip_temp(struct acpi_device *adev, int id, int *ret_temp)
+{
+	char obj_name[] = {'_', 'A', 'C', '0' + id, '\0'};
+
+	if (id < 0 || id > 9)
+		return -EINVAL;
+
+	return acpi_trip_temp(adev, obj_name, ret_temp);
+}
+EXPORT_SYMBOL_NS_GPL(acpi_active_trip_temp, "ACPI_THERMAL");
+
+int acpi_passive_trip_temp(struct acpi_device *adev, int *ret_temp)
+{
+	return acpi_trip_temp(adev, "_PSV", ret_temp);
+}
+EXPORT_SYMBOL_NS_GPL(acpi_passive_trip_temp, "ACPI_THERMAL");
+
+int acpi_hot_trip_temp(struct acpi_device *adev, int *ret_temp)
+{
+	return acpi_trip_temp(adev, "_HOT", ret_temp);
+}
+EXPORT_SYMBOL_NS_GPL(acpi_hot_trip_temp, "ACPI_THERMAL");
+
+int acpi_critical_trip_temp(struct acpi_device *adev, int *ret_temp)
+{
+	return acpi_trip_temp(adev, "_CRT", ret_temp);
+}
+EXPORT_SYMBOL_NS_GPL(acpi_critical_trip_temp, "ACPI_THERMAL");
+
+static int thermal_temp(int error, int temp_decik, int *ret_temp)
+{
+	if (error)
+		return error;
+
+	if (temp_decik == THERMAL_TEMP_INVALID)
+		*ret_temp = THERMAL_TEMP_INVALID;
+	else
+		*ret_temp = deci_kelvin_to_millicelsius(temp_decik);
+
+	return 0;
+}
+
+/**
+ * thermal_acpi_active_trip_temp - Retrieve active trip point temperature
+ * @adev: Target thermal zone ACPI device object.
+ * @id: Active cooling level (0 - 9).
+ * @ret_temp: Address to store the retrieved temperature value on success.
+ *
+ * Evaluate the _ACx object for the thermal zone represented by @adev to obtain
+ * the temperature of the active cooling trip point corresponding to the active
+ * cooling level given by @id.
+ *
+ * Return 0 on success or a negative error value on failure.
+ */
+int thermal_acpi_active_trip_temp(struct acpi_device *adev, int id, int *ret_temp)
+{
+	int temp_decik = 0;
+	int ret = acpi_active_trip_temp(adev, id, &temp_decik);
+
+	return thermal_temp(ret, temp_decik, ret_temp);
+}
+EXPORT_SYMBOL_GPL(thermal_acpi_active_trip_temp);
+
+/**
+ * thermal_acpi_passive_trip_temp - Retrieve passive trip point temperature
+ * @adev: Target thermal zone ACPI device object.
+ * @ret_temp: Address to store the retrieved temperature value on success.
+ *
+ * Evaluate the _PSV object for the thermal zone represented by @adev to obtain
+ * the temperature of the passive cooling trip point.
+ *
+ * Return 0 on success or -ENODATA on failure.
+ */
+int thermal_acpi_passive_trip_temp(struct acpi_device *adev, int *ret_temp)
+{
+	int temp_decik = 0;
+	int ret = acpi_passive_trip_temp(adev, &temp_decik);
+
+	return thermal_temp(ret, temp_decik, ret_temp);
+}
+EXPORT_SYMBOL_GPL(thermal_acpi_passive_trip_temp);
+
+/**
+ * thermal_acpi_hot_trip_temp - Retrieve hot trip point temperature
+ * @adev: Target thermal zone ACPI device object.
+ * @ret_temp: Address to store the retrieved temperature value on success.
+ *
+ * Evaluate the _HOT object for the thermal zone represented by @adev to obtain
+ * the temperature of the trip point at which the system is expected to be put
+ * into the S4 sleep state.
+ *
+ * Return 0 on success or -ENODATA on failure.
+ */
+int thermal_acpi_hot_trip_temp(struct acpi_device *adev, int *ret_temp)
+{
+	int temp_decik = 0;
+	int ret = acpi_hot_trip_temp(adev, &temp_decik);
+
+	return thermal_temp(ret, temp_decik, ret_temp);
+}
+EXPORT_SYMBOL_GPL(thermal_acpi_hot_trip_temp);
+
+/**
+ * thermal_acpi_critical_trip_temp - Retrieve critical trip point temperature
+ * @adev: Target thermal zone ACPI device object.
+ * @ret_temp: Address to store the retrieved temperature value on success.
+ *
+ * Evaluate the _CRT object for the thermal zone represented by @adev to obtain
+ * the temperature of the critical cooling trip point.
+ *
+ * Return 0 on success or -ENODATA on failure.
+ */
+int thermal_acpi_critical_trip_temp(struct acpi_device *adev, int *ret_temp)
+{
+	int temp_decik = 0;
+	int ret = acpi_critical_trip_temp(adev, &temp_decik);
+
+	return thermal_temp(ret, temp_decik, ret_temp);
+}
+EXPORT_SYMBOL_GPL(thermal_acpi_critical_trip_temp);