From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- drivers/acpi/thermal_lib.c | 166 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 166 insertions(+) create mode 100644 drivers/acpi/thermal_lib.c (limited to 'drivers/acpi/thermal_lib.c') diff --git a/drivers/acpi/thermal_lib.c b/drivers/acpi/thermal_lib.c new file mode 100644 index 000000000..f81591927 --- /dev/null +++ b/drivers/acpi/thermal_lib.c @@ -0,0 +1,166 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2023 Linaro Limited + * Copyright 2023 Intel Corporation + * + * Library routines for retrieving trip point temperature values from the + * platform firmware via ACPI. + */ +#include +#include +#include +#include "internal.h" + +/* + * Minimum temperature for full military grade is 218°K (-55°C) and + * max temperature is 448°K (175°C). We can consider those values as + * the boundaries for the [trips] temperature returned by the + * firmware. Any values out of these boundaries may be considered + * bogus and we can assume the firmware has no data to provide. + */ +#define TEMP_MIN_DECIK 2180ULL +#define TEMP_MAX_DECIK 4480ULL + +static int acpi_trip_temp(struct acpi_device *adev, char *obj_name, + int *ret_temp) +{ + unsigned long long temp; + acpi_status status; + + status = acpi_evaluate_integer(adev->handle, obj_name, NULL, &temp); + if (ACPI_FAILURE(status)) { + acpi_handle_debug(adev->handle, "%s evaluation failed\n", obj_name); + return -ENODATA; + } + + if (temp >= TEMP_MIN_DECIK && temp <= TEMP_MAX_DECIK) { + *ret_temp = temp; + } else { + acpi_handle_debug(adev->handle, "%s result %llu out of range\n", + obj_name, temp); + *ret_temp = THERMAL_TEMP_INVALID; + } + + return 0; +} + +int acpi_active_trip_temp(struct acpi_device *adev, int id, int *ret_temp) +{ + char obj_name[] = {'_', 'A', 'C', '0' + id, '\0'}; + + if (id < 0 || id > 9) + return -EINVAL; + + return acpi_trip_temp(adev, obj_name, ret_temp); +} +EXPORT_SYMBOL_NS_GPL(acpi_active_trip_temp, "ACPI_THERMAL"); + +int acpi_passive_trip_temp(struct acpi_device *adev, int *ret_temp) +{ + return acpi_trip_temp(adev, "_PSV", ret_temp); +} +EXPORT_SYMBOL_NS_GPL(acpi_passive_trip_temp, "ACPI_THERMAL"); + +int acpi_hot_trip_temp(struct acpi_device *adev, int *ret_temp) +{ + return acpi_trip_temp(adev, "_HOT", ret_temp); +} +EXPORT_SYMBOL_NS_GPL(acpi_hot_trip_temp, "ACPI_THERMAL"); + +int acpi_critical_trip_temp(struct acpi_device *adev, int *ret_temp) +{ + return acpi_trip_temp(adev, "_CRT", ret_temp); +} +EXPORT_SYMBOL_NS_GPL(acpi_critical_trip_temp, "ACPI_THERMAL"); + +static int thermal_temp(int error, int temp_decik, int *ret_temp) +{ + if (error) + return error; + + if (temp_decik == THERMAL_TEMP_INVALID) + *ret_temp = THERMAL_TEMP_INVALID; + else + *ret_temp = deci_kelvin_to_millicelsius(temp_decik); + + return 0; +} + +/** + * thermal_acpi_active_trip_temp - Retrieve active trip point temperature + * @adev: Target thermal zone ACPI device object. + * @id: Active cooling level (0 - 9). + * @ret_temp: Address to store the retrieved temperature value on success. + * + * Evaluate the _ACx object for the thermal zone represented by @adev to obtain + * the temperature of the active cooling trip point corresponding to the active + * cooling level given by @id. + * + * Return 0 on success or a negative error value on failure. + */ +int thermal_acpi_active_trip_temp(struct acpi_device *adev, int id, int *ret_temp) +{ + int temp_decik = 0; + int ret = acpi_active_trip_temp(adev, id, &temp_decik); + + return thermal_temp(ret, temp_decik, ret_temp); +} +EXPORT_SYMBOL_GPL(thermal_acpi_active_trip_temp); + +/** + * thermal_acpi_passive_trip_temp - Retrieve passive trip point temperature + * @adev: Target thermal zone ACPI device object. + * @ret_temp: Address to store the retrieved temperature value on success. + * + * Evaluate the _PSV object for the thermal zone represented by @adev to obtain + * the temperature of the passive cooling trip point. + * + * Return 0 on success or -ENODATA on failure. + */ +int thermal_acpi_passive_trip_temp(struct acpi_device *adev, int *ret_temp) +{ + int temp_decik = 0; + int ret = acpi_passive_trip_temp(adev, &temp_decik); + + return thermal_temp(ret, temp_decik, ret_temp); +} +EXPORT_SYMBOL_GPL(thermal_acpi_passive_trip_temp); + +/** + * thermal_acpi_hot_trip_temp - Retrieve hot trip point temperature + * @adev: Target thermal zone ACPI device object. + * @ret_temp: Address to store the retrieved temperature value on success. + * + * Evaluate the _HOT object for the thermal zone represented by @adev to obtain + * the temperature of the trip point at which the system is expected to be put + * into the S4 sleep state. + * + * Return 0 on success or -ENODATA on failure. + */ +int thermal_acpi_hot_trip_temp(struct acpi_device *adev, int *ret_temp) +{ + int temp_decik = 0; + int ret = acpi_hot_trip_temp(adev, &temp_decik); + + return thermal_temp(ret, temp_decik, ret_temp); +} +EXPORT_SYMBOL_GPL(thermal_acpi_hot_trip_temp); + +/** + * thermal_acpi_critical_trip_temp - Retrieve critical trip point temperature + * @adev: Target thermal zone ACPI device object. + * @ret_temp: Address to store the retrieved temperature value on success. + * + * Evaluate the _CRT object for the thermal zone represented by @adev to obtain + * the temperature of the critical cooling trip point. + * + * Return 0 on success or -ENODATA on failure. + */ +int thermal_acpi_critical_trip_temp(struct acpi_device *adev, int *ret_temp) +{ + int temp_decik = 0; + int ret = acpi_critical_trip_temp(adev, &temp_decik); + + return thermal_temp(ret, temp_decik, ret_temp); +} +EXPORT_SYMBOL_GPL(thermal_acpi_critical_trip_temp); -- cgit v1.3.1