Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 93 insertions, 0 deletions

diff --git a/arch/arc/lib/strcmp.S b/arch/arc/lib/strcmp.S
new file mode 100644
index 000000000..b20c98fb3
--- /dev/null
+++ b/arch/arc/lib/strcmp.S
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/* This is optimized primarily for the ARC700.
+   It would be possible to speed up the loops by one cycle / word
+   respective one cycle / byte by forcing double source 1 alignment, unrolling
+   by a factor of two, and speculatively loading the second word / byte of
+   source 1; however, that would increase the overhead for loop setup / finish,
+   and strcmp might often terminate early.  */
+
+#include <linux/linkage.h>
+
+ENTRY_CFI(strcmp)
+	or	r2,r0,r1
+	bmsk_s	r2,r2,1
+	brne	r2,0,.Lcharloop
+	mov_s	r12,0x01010101
+	ror	r5,r12
+.Lwordloop:
+	ld.ab	r2,[r0,4]
+	ld.ab	r3,[r1,4]
+	nop_s
+	sub	r4,r2,r12
+	bic	r4,r4,r2
+	and	r4,r4,r5
+	brne	r4,0,.Lfound0
+	breq	r2,r3,.Lwordloop
+#ifdef	__LITTLE_ENDIAN__
+	xor	r0,r2,r3	; mask for difference
+	sub_s	r1,r0,1
+	bic_s	r0,r0,r1	; mask for least significant difference bit
+	sub	r1,r5,r0
+	xor	r0,r5,r1	; mask for least significant difference byte
+	and_s	r2,r2,r0
+	and_s	r3,r3,r0
+#endif /* LITTLE ENDIAN */
+	cmp_s	r2,r3
+	mov_s	r0,1
+	j_s.d	[blink]
+	bset.lo	r0,r0,31
+
+	.balign	4
+#ifdef __LITTLE_ENDIAN__
+.Lfound0:
+	xor	r0,r2,r3	; mask for difference
+	or	r0,r0,r4	; or in zero indicator
+	sub_s	r1,r0,1
+	bic_s	r0,r0,r1	; mask for least significant difference bit
+	sub	r1,r5,r0
+	xor	r0,r5,r1	; mask for least significant difference byte
+	and_s	r2,r2,r0
+	and_s	r3,r3,r0
+	sub.f	r0,r2,r3
+	mov.hi	r0,1
+	j_s.d	[blink]
+	bset.lo	r0,r0,31
+#else /* BIG ENDIAN */
+	/* The zero-detection above can mis-detect 0x01 bytes as zeroes
+	   because of carry-propagateion from a lower significant zero byte.
+	   We can compensate for this by checking that bit0 is zero.
+	   This compensation is not necessary in the step where we
+	   get a low estimate for r2, because in any affected bytes
+	   we already have 0x00 or 0x01, which will remain unchanged
+	   when bit 7 is cleared.  */
+	.balign	4
+.Lfound0:
+	lsr	r0,r4,8
+	lsr_s	r1,r2
+	bic_s	r2,r2,r0	; get low estimate for r2 and get ...
+	bic_s	r0,r0,r1	; <this is the adjusted mask for zeros>
+	or_s	r3,r3,r0	; ... high estimate r3 so that r2 > r3 will ...
+	cmp_s	r3,r2		; ... be independent of trailing garbage
+	or_s	r2,r2,r0	; likewise for r3 > r2
+	bic_s	r3,r3,r0
+	rlc	r0,0		; r0 := r2 > r3 ? 1 : 0
+	cmp_s	r2,r3
+	j_s.d	[blink]
+	bset.lo	r0,r0,31
+#endif /* ENDIAN */
+
+	.balign	4
+.Lcharloop:
+	ldb.ab	r2,[r0,1]
+	ldb.ab	r3,[r1,1]
+	nop_s
+	breq	r2,0,.Lcmpend
+	breq	r2,r3,.Lcharloop
+.Lcmpend:
+	j_s.d	[blink]
+	sub	r0,r2,r3
+END_CFI(strcmp)