From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- arch/arc/lib/strcmp.S | 93 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 93 insertions(+) create mode 100644 arch/arc/lib/strcmp.S (limited to 'arch/arc/lib/strcmp.S') diff --git a/arch/arc/lib/strcmp.S b/arch/arc/lib/strcmp.S new file mode 100644 index 000000000..b20c98fb3 --- /dev/null +++ b/arch/arc/lib/strcmp.S @@ -0,0 +1,93 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +/* This is optimized primarily for the ARC700. + It would be possible to speed up the loops by one cycle / word + respective one cycle / byte by forcing double source 1 alignment, unrolling + by a factor of two, and speculatively loading the second word / byte of + source 1; however, that would increase the overhead for loop setup / finish, + and strcmp might often terminate early. */ + +#include + +ENTRY_CFI(strcmp) + or r2,r0,r1 + bmsk_s r2,r2,1 + brne r2,0,.Lcharloop + mov_s r12,0x01010101 + ror r5,r12 +.Lwordloop: + ld.ab r2,[r0,4] + ld.ab r3,[r1,4] + nop_s + sub r4,r2,r12 + bic r4,r4,r2 + and r4,r4,r5 + brne r4,0,.Lfound0 + breq r2,r3,.Lwordloop +#ifdef __LITTLE_ENDIAN__ + xor r0,r2,r3 ; mask for difference + sub_s r1,r0,1 + bic_s r0,r0,r1 ; mask for least significant difference bit + sub r1,r5,r0 + xor r0,r5,r1 ; mask for least significant difference byte + and_s r2,r2,r0 + and_s r3,r3,r0 +#endif /* LITTLE ENDIAN */ + cmp_s r2,r3 + mov_s r0,1 + j_s.d [blink] + bset.lo r0,r0,31 + + .balign 4 +#ifdef __LITTLE_ENDIAN__ +.Lfound0: + xor r0,r2,r3 ; mask for difference + or r0,r0,r4 ; or in zero indicator + sub_s r1,r0,1 + bic_s r0,r0,r1 ; mask for least significant difference bit + sub r1,r5,r0 + xor r0,r5,r1 ; mask for least significant difference byte + and_s r2,r2,r0 + and_s r3,r3,r0 + sub.f r0,r2,r3 + mov.hi r0,1 + j_s.d [blink] + bset.lo r0,r0,31 +#else /* BIG ENDIAN */ + /* The zero-detection above can mis-detect 0x01 bytes as zeroes + because of carry-propagateion from a lower significant zero byte. + We can compensate for this by checking that bit0 is zero. + This compensation is not necessary in the step where we + get a low estimate for r2, because in any affected bytes + we already have 0x00 or 0x01, which will remain unchanged + when bit 7 is cleared. */ + .balign 4 +.Lfound0: + lsr r0,r4,8 + lsr_s r1,r2 + bic_s r2,r2,r0 ; get low estimate for r2 and get ... + bic_s r0,r0,r1 ; + or_s r3,r3,r0 ; ... high estimate r3 so that r2 > r3 will ... + cmp_s r3,r2 ; ... be independent of trailing garbage + or_s r2,r2,r0 ; likewise for r3 > r2 + bic_s r3,r3,r0 + rlc r0,0 ; r0 := r2 > r3 ? 1 : 0 + cmp_s r2,r3 + j_s.d [blink] + bset.lo r0,r0,31 +#endif /* ENDIAN */ + + .balign 4 +.Lcharloop: + ldb.ab r2,[r0,1] + ldb.ab r3,[r1,1] + nop_s + breq r2,0,.Lcmpend + breq r2,r3,.Lcharloop +.Lcmpend: + j_s.d [blink] + sub r0,r2,r3 +END_CFI(strcmp) -- cgit v1.3.1