iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 62 insertions, 0 deletions

diff --git a/Documentation/gpu/amdgpu/ras.rst b/Documentation/gpu/amdgpu/ras.rst
new file mode 100644
index 000000000..047f76e39
--- /dev/null
+++ b/Documentation/gpu/amdgpu/ras.rst
@@ -0,0 +1,62 @@
+====================
+ AMDGPU RAS Support
+====================
+
+The AMDGPU RAS interfaces are exposed via sysfs (for informational queries) and
+debugfs (for error injection).
+
+RAS debugfs/sysfs Control and Error Injection Interfaces
+========================================================
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
+   :doc: AMDGPU RAS debugfs control interface
+
+RAS Reboot Behavior for Unrecoverable Errors
+============================================
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
+   :doc: AMDGPU RAS Reboot Behavior for Unrecoverable Errors
+
+RAS Error Count sysfs Interface
+===============================
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
+   :doc: AMDGPU RAS sysfs Error Count Interface
+
+RAS EEPROM debugfs Interface
+============================
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
+   :doc: AMDGPU RAS debugfs EEPROM table reset interface
+
+RAS VRAM Bad Pages sysfs Interface
+==================================
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
+   :doc: AMDGPU RAS sysfs gpu_vram_bad_pages Interface
+
+Sample Code
+===========
+Sample code for testing error injection can be found here:
+https://cgit.freedesktop.org/mesa/drm/tree/tests/amdgpu/ras_tests.c
+
+This is part of the libdrm amdgpu unit tests which cover several areas of the GPU.
+There are four sets of tests:
+
+RAS Basic Test
+
+The test verifies the RAS feature enabled status and makes sure the necessary sysfs and debugfs files
+are present.
+
+RAS Query Test
+
+This test checks the RAS availability and enablement status for each supported IP block as well as
+the error counts.
+
+RAS Inject Test
+
+This test injects errors for each IP.
+
+RAS Disable Test
+
+This test tests disabling of RAS features for each IP block.