From e24328974a88aa8541e94e8bb8dfa2ade1b3c45d Mon Sep 17 00:00:00 2001 From: Donggeun Yoo Date: Wed, 2 Sep 2026 00:21:26 +0900 Subject: iio: proximity: vl53l0x-i2c: claim direct mode for raw reads vl53l0x_read_raw() starts a single-shot ranging measurement and reads back the result. Once the triggered buffer is enabled the sensor runs in continuous mode and its data-ready interrupt is routed to the trigger, so a concurrent in_distance_raw read disturbs the streaming setup and never gets its completion, returning -ETIMEDOUT. The original submission claimed direct mode here, but it was dropped during review because the driver had no buffer support at the time [1]. Continuous (buffered) mode was later added without restoring the claim [2], reintroducing the conflict. Reject direct reads while buffered capture is active by claiming direct mode around the measurement, as the vl53l1x sibling already does. Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support") Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1] Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2] Signed-off-by: Donggeun Yoo Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- Documentation/gpu/amdgpu/ras.rst | 62 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 Documentation/gpu/amdgpu/ras.rst (limited to 'Documentation/gpu/amdgpu/ras.rst') diff --git a/Documentation/gpu/amdgpu/ras.rst b/Documentation/gpu/amdgpu/ras.rst new file mode 100644 index 000000000..047f76e39 --- /dev/null +++ b/Documentation/gpu/amdgpu/ras.rst @@ -0,0 +1,62 @@ +==================== + AMDGPU RAS Support +==================== + +The AMDGPU RAS interfaces are exposed via sysfs (for informational queries) and +debugfs (for error injection). + +RAS debugfs/sysfs Control and Error Injection Interfaces +======================================================== + +.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c + :doc: AMDGPU RAS debugfs control interface + +RAS Reboot Behavior for Unrecoverable Errors +============================================ + +.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c + :doc: AMDGPU RAS Reboot Behavior for Unrecoverable Errors + +RAS Error Count sysfs Interface +=============================== + +.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c + :doc: AMDGPU RAS sysfs Error Count Interface + +RAS EEPROM debugfs Interface +============================ + +.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c + :doc: AMDGPU RAS debugfs EEPROM table reset interface + +RAS VRAM Bad Pages sysfs Interface +================================== + +.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c + :doc: AMDGPU RAS sysfs gpu_vram_bad_pages Interface + +Sample Code +=========== +Sample code for testing error injection can be found here: +https://cgit.freedesktop.org/mesa/drm/tree/tests/amdgpu/ras_tests.c + +This is part of the libdrm amdgpu unit tests which cover several areas of the GPU. +There are four sets of tests: + +RAS Basic Test + +The test verifies the RAS feature enabled status and makes sure the necessary sysfs and debugfs files +are present. + +RAS Query Test + +This test checks the RAS availability and enablement status for each supported IP block as well as +the error counts. + +RAS Inject Test + +This test injects errors for each IP. + +RAS Disable Test + +This test tests disabling of RAS features for each IP block. -- cgit v1.3.1