iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 33 insertions, 0 deletions

diff --git a/Documentation/gpu/amdgpu/flashing.rst b/Documentation/gpu/amdgpu/flashing.rst
new file mode 100644
index 000000000..bd745c42a
--- /dev/null
+++ b/Documentation/gpu/amdgpu/flashing.rst
@@ -0,0 +1,33 @@
+=======================
+ dGPU firmware flashing
+=======================
+
+IFWI
+----
+Flashing the dGPU integrated firmware image (IFWI) is supported by GPUs that
+use the PSP to orchestrate the update (Navi3x or newer GPUs).
+For supported GPUs, `amdgpu` will export a series of sysfs files that can be
+used for the flash process.
+
+The IFWI flash process is:
+
+1. Ensure the IFWI image is intended for the dGPU on the system.
+2. "Write" the IFWI image to the sysfs file `psp_vbflash`. This will stage the IFWI in memory.
+3. "Read" from the `psp_vbflash` sysfs file to initiate the flash process.
+4. Poll the `psp_vbflash_status` sysfs file to determine when the flash process completes.
+
+USB-C PD F/W
+------------
+On GPUs that support flashing an updated USB-C PD firmware image, the process
+is done using the `usbc_pd_fw` sysfs file.
+
+* Reading the file will provide the current firmware version.
+* Writing the name of a firmware payload stored in `/lib/firmware/amdgpu` to the sysfs file will initiate the flash process.
+
+The firmware payload stored in `/lib/firmware/amdgpu` can be named any name
+as long as it doesn't conflict with other existing binaries that are used by
+`amdgpu`.
+
+sysfs files
+-----------
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c