From e24328974a88aa8541e94e8bb8dfa2ade1b3c45d Mon Sep 17 00:00:00 2001 From: Donggeun Yoo Date: Wed, 2 Sep 2026 00:21:26 +0900 Subject: iio: proximity: vl53l0x-i2c: claim direct mode for raw reads vl53l0x_read_raw() starts a single-shot ranging measurement and reads back the result. Once the triggered buffer is enabled the sensor runs in continuous mode and its data-ready interrupt is routed to the trigger, so a concurrent in_distance_raw read disturbs the streaming setup and never gets its completion, returning -ETIMEDOUT. The original submission claimed direct mode here, but it was dropped during review because the driver had no buffer support at the time [1]. Continuous (buffered) mode was later added without restoring the claim [2], reintroducing the conflict. Reject direct reads while buffered capture is active by claiming direct mode around the measurement, as the vl53l1x sibling already does. Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support") Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1] Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2] Signed-off-by: Donggeun Yoo Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- Documentation/gpu/amdgpu/flashing.rst | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/gpu/amdgpu/flashing.rst (limited to 'Documentation/gpu/amdgpu/flashing.rst') diff --git a/Documentation/gpu/amdgpu/flashing.rst b/Documentation/gpu/amdgpu/flashing.rst new file mode 100644 index 000000000..bd745c42a --- /dev/null +++ b/Documentation/gpu/amdgpu/flashing.rst @@ -0,0 +1,33 @@ +======================= + dGPU firmware flashing +======================= + +IFWI +---- +Flashing the dGPU integrated firmware image (IFWI) is supported by GPUs that +use the PSP to orchestrate the update (Navi3x or newer GPUs). +For supported GPUs, `amdgpu` will export a series of sysfs files that can be +used for the flash process. + +The IFWI flash process is: + +1. Ensure the IFWI image is intended for the dGPU on the system. +2. "Write" the IFWI image to the sysfs file `psp_vbflash`. This will stage the IFWI in memory. +3. "Read" from the `psp_vbflash` sysfs file to initiate the flash process. +4. Poll the `psp_vbflash_status` sysfs file to determine when the flash process completes. + +USB-C PD F/W +------------ +On GPUs that support flashing an updated USB-C PD firmware image, the process +is done using the `usbc_pd_fw` sysfs file. + +* Reading the file will provide the current firmware version. +* Writing the name of a firmware payload stored in `/lib/firmware/amdgpu` to the sysfs file will initiate the flash process. + +The firmware payload stored in `/lib/firmware/amdgpu` can be named any name +as long as it doesn't conflict with other existing binaries that are used by +`amdgpu`. + +sysfs files +----------- +.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c -- cgit v1.3.1