Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 102 insertions, 0 deletions

diff --git a/Documentation/driver-api/switchtec.rst b/Documentation/driver-api/switchtec.rst
new file mode 100644
index 000000000..7611fdc53
--- /dev/null
+++ b/Documentation/driver-api/switchtec.rst
@@ -0,0 +1,102 @@
+========================
+Linux Switchtec Support
+========================
+
+Microsemi's "Switchtec" line of PCI switch devices is already
+supported by the kernel with standard PCI switch drivers. However, the
+Switchtec device advertises a special management endpoint which
+enables some additional functionality. This includes:
+
+* Packet and Byte Counters
+* Firmware Upgrades
+* Event and Error logs
+* Querying port link status
+* Custom user firmware commands
+
+The switchtec kernel module implements this functionality.
+
+
+Interface
+=========
+
+The primary means of communicating with the Switchtec management firmware is
+through the Memory-mapped Remote Procedure Call (MRPC) interface.
+Commands are submitted to the interface with a 4-byte command
+identifier and up to 1KB of command specific data. The firmware will
+respond with a 4-byte return code and up to 1KB of command-specific
+data. The interface only processes a single command at a time.
+
+
+Userspace Interface
+===================
+
+The MRPC interface will be exposed to userspace through a simple char
+device: /dev/switchtec#, one for each management endpoint in the system.
+
+The char device has the following semantics:
+
+* A write must consist of at least 4 bytes and no more than 1028 bytes.
+  The first 4 bytes will be interpreted as the Command ID and the
+  remainder will be used as the input data. A write will send the
+  command to the firmware to begin processing.
+
+* Each write must be followed by exactly one read. Any double write will
+  produce an error and any read that doesn't follow a write will
+  produce an error.
+
+* A read will block until the firmware completes the command and return
+  the 4-byte Command Return Value plus up to 1024 bytes of output
+  data. (The length will be specified by the size parameter of the read
+  call -- reading less than 4 bytes will produce an error.)
+
+* The poll call will also be supported for userspace applications that
+  need to do other things while waiting for the command to complete.
+
+The following IOCTLs are also supported by the device:
+
+* SWITCHTEC_IOCTL_FLASH_INFO - Retrieve firmware length and number
+  of partitions in the device.
+
+* SWITCHTEC_IOCTL_FLASH_PART_INFO - Retrieve address and lengeth for
+  any specified partition in flash.
+
+* SWITCHTEC_IOCTL_EVENT_SUMMARY - Read a structure of bitmaps
+  indicating all uncleared events.
+
+* SWITCHTEC_IOCTL_EVENT_CTL - Get the current count, clear and set flags
+  for any event. This ioctl takes in a switchtec_ioctl_event_ctl struct
+  with the event_id, index and flags set (index being the partition or PFF
+  number for non-global events). It returns whether the event has
+  occurred, the number of times and any event specific data. The flags
+  can be used to clear the count or enable and disable actions to
+  happen when the event occurs.
+  By using the SWITCHTEC_IOCTL_EVENT_FLAG_EN_POLL flag,
+  you can set an event to trigger a poll command to return with
+  POLLPRI. In this way, userspace can wait for events to occur.
+
+* SWITCHTEC_IOCTL_PFF_TO_PORT and SWITCHTEC_IOCTL_PORT_TO_PFF convert
+  between PCI Function Framework number (used by the event system)
+  and Switchtec Logic Port ID and Partition number (which is more
+  user friendly).
+
+
+Non-Transparent Bridge (NTB) Driver
+===================================
+
+An NTB hardware driver is provided for the Switchtec hardware in
+ntb_hw_switchtec. Currently, it only supports switches configured with
+exactly 2 NT partitions and zero or more non-NT partitions. It also requires
+the following configuration settings:
+
+* Both NT partitions must be able to access each other's GAS spaces.
+  Thus, the bits in the GAS Access Vector under Management Settings
+  must be set to support this.
+* Kernel configuration MUST include support for NTB (CONFIG_NTB needs
+  to be set)
+
+NT EP BAR 2 will be dynamically configured as a Direct Window, and
+the configuration file does not need to configure it explicitly.
+
+Please refer to Documentation/driver-api/ntb.rst in Linux source tree for an overall
+understanding of the Linux NTB stack. ntb_hw_switchtec works as an NTB
+Hardware Driver in this stack.