From f4cdf7ca9a1fdcca413157df19753f388a5a224e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 19 Aug 2026 10:09:22 -0700 Subject: Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - v4l2-core: added ISP statistics support and per-block validation - v4l2-core: Allow unknown HDR10 white point and luminance - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor - New codec: Milos: VPU v2.0 codec support - isp driver: gained support for Dreamchip RPPX1 ISP framework - vsp1 driver: gained support for RZ/T2H and RZ/N2H - Novalake driver: gained CVS support for new NVL hardware - dvb-core: fix feed leak on failed DMX_ADD_PID - several driver fixes, cleanups and minor improvements * tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits) media: ipu-bridge: check all DMI entries when overriding sensor rotation media: v4l2-async: avoid deleting unlinked ASC entry on link error media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement media: intel/ipu6: fix async notifier cleanup leak on parse error media: staging/ipu7: fix async notifier UAF on probe error path media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem() media: rcar-isp: Fix VSPX reference leaks media: rcar-isp: Release ISPCORE resources media: i2c: imx415: Release runtime PM reference on VBLANK error media: i2c: imx415: Return test pattern write errors media: renesas: vsp1: Declare index variables in for loop statement media: renesas: vsp1: Make reset control optional to support platforms without a reset line media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs media: nxp: imx8-isi: Add additional 32-bit RGB format support media: nxp: imx8-isi: Add 16-bit raw Bayer format support media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks media: nxp: imx8-isi: Correct color map between V4L2 and ISI ... --- Documentation/driver-api/switchtec.rst | 102 +++++++++++++++++++++++++++++++++ 1 file changed, 102 insertions(+) create mode 100644 Documentation/driver-api/switchtec.rst (limited to 'Documentation/driver-api/switchtec.rst') diff --git a/Documentation/driver-api/switchtec.rst b/Documentation/driver-api/switchtec.rst new file mode 100644 index 000000000..7611fdc53 --- /dev/null +++ b/Documentation/driver-api/switchtec.rst @@ -0,0 +1,102 @@ +======================== +Linux Switchtec Support +======================== + +Microsemi's "Switchtec" line of PCI switch devices is already +supported by the kernel with standard PCI switch drivers. However, the +Switchtec device advertises a special management endpoint which +enables some additional functionality. This includes: + +* Packet and Byte Counters +* Firmware Upgrades +* Event and Error logs +* Querying port link status +* Custom user firmware commands + +The switchtec kernel module implements this functionality. + + +Interface +========= + +The primary means of communicating with the Switchtec management firmware is +through the Memory-mapped Remote Procedure Call (MRPC) interface. +Commands are submitted to the interface with a 4-byte command +identifier and up to 1KB of command specific data. The firmware will +respond with a 4-byte return code and up to 1KB of command-specific +data. The interface only processes a single command at a time. + + +Userspace Interface +=================== + +The MRPC interface will be exposed to userspace through a simple char +device: /dev/switchtec#, one for each management endpoint in the system. + +The char device has the following semantics: + +* A write must consist of at least 4 bytes and no more than 1028 bytes. + The first 4 bytes will be interpreted as the Command ID and the + remainder will be used as the input data. A write will send the + command to the firmware to begin processing. + +* Each write must be followed by exactly one read. Any double write will + produce an error and any read that doesn't follow a write will + produce an error. + +* A read will block until the firmware completes the command and return + the 4-byte Command Return Value plus up to 1024 bytes of output + data. (The length will be specified by the size parameter of the read + call -- reading less than 4 bytes will produce an error.) + +* The poll call will also be supported for userspace applications that + need to do other things while waiting for the command to complete. + +The following IOCTLs are also supported by the device: + +* SWITCHTEC_IOCTL_FLASH_INFO - Retrieve firmware length and number + of partitions in the device. + +* SWITCHTEC_IOCTL_FLASH_PART_INFO - Retrieve address and lengeth for + any specified partition in flash. + +* SWITCHTEC_IOCTL_EVENT_SUMMARY - Read a structure of bitmaps + indicating all uncleared events. + +* SWITCHTEC_IOCTL_EVENT_CTL - Get the current count, clear and set flags + for any event. This ioctl takes in a switchtec_ioctl_event_ctl struct + with the event_id, index and flags set (index being the partition or PFF + number for non-global events). It returns whether the event has + occurred, the number of times and any event specific data. The flags + can be used to clear the count or enable and disable actions to + happen when the event occurs. + By using the SWITCHTEC_IOCTL_EVENT_FLAG_EN_POLL flag, + you can set an event to trigger a poll command to return with + POLLPRI. In this way, userspace can wait for events to occur. + +* SWITCHTEC_IOCTL_PFF_TO_PORT and SWITCHTEC_IOCTL_PORT_TO_PFF convert + between PCI Function Framework number (used by the event system) + and Switchtec Logic Port ID and Partition number (which is more + user friendly). + + +Non-Transparent Bridge (NTB) Driver +=================================== + +An NTB hardware driver is provided for the Switchtec hardware in +ntb_hw_switchtec. Currently, it only supports switches configured with +exactly 2 NT partitions and zero or more non-NT partitions. It also requires +the following configuration settings: + +* Both NT partitions must be able to access each other's GAS spaces. + Thus, the bits in the GAS Access Vector under Management Settings + must be set to support this. +* Kernel configuration MUST include support for NTB (CONFIG_NTB needs + to be set) + +NT EP BAR 2 will be dynamically configured as a Direct Window, and +the configuration file does not need to configure it explicitly. + +Please refer to Documentation/driver-api/ntb.rst in Linux source tree for an overall +understanding of the Linux NTB stack. ntb_hw_switchtec works as an NTB +Hardware Driver in this stack. -- cgit v1.3.1