Merge tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-tracegrafted

Pull tracing fixes from Steven Rostedt:

 - Fix error output of boot instance creation failure

   Currently if a boot instance creation fails, instead of printing out
   the name of the instance that failed, it prints "(null)". That is
   because it prints "cur_str" that had already been processed by
   strsep(). Print the saved name instead.

   While at it, print the error code of the failure.

 - Fix use-after-free for same named historgrams

   Histograms can be named so that they can be used in multiple events.
   But if the named histogram has a variable attached, the second event
   that uses the named histogram which duplicates it and needs to free
   the original after duplication leaves the old variable in place and
   still visible. If another histogram uses than variable, it will use
   the stale one which will try to reference the freed duplicate
   histogram and crash the kernel.

   Free the duplicate variables along with the duplicated histogram
   data.

 - Check return value of kthread_run() in event self test

   The events self tests uses a kthread for testing but does not check
   if it succeeded in creating a kthread. If the kthread creation were
   to fail, the code will still try to call kthread_stop() on the error
   returned.

 - Fix race between reading trace_pipe and updating subbuffer size

   If a user is reading the trace_pipe file at the same time they update
   the ring buffer sub-buffer size, can cause the trace_pipe read to
   read stale data. Add trace_access_lock() around updating the ring
   buffer sub-buffer size.

 - Fix eventfs_inode on failure path in creation of the events directory

   In the creation of the "events" directory, if after allocating the
   eventfs_inode a failure is detected, it calls cleanup_ei() which
   calls free_ei(). The free_ei() will test if eventfs_inode being freed
   has no children. It is a bug if it does. But on the failure case of
   the creation of the "events" directory, the children lists have not
   yet been initialized and the free will trigger a warning because
   list_empty() on an uninitialized list returns false.

   Move the initialization into init_ei() where it makes more sense and
   makes sure that a created eventfs_inode has its lists initialized
   upon creation.

 - Check return value of kthread_run() in ftrace direct sample code

   The sample code that shows how to use the ftrace direct calls does
   not test the return of kthread_run() to see if it succeeds. Return a
   failure if the kthread_run() doesn't succeed.

 - Clear user events state on fork in case of alloc failure

   On fork, the child gets a pointer to the parent's user events state.
   It makes a copy of it then updates the child's pointer to it. But if
   the allocation fails, the duplication function leaves the child with
   a pointer to its parent's descriptor. When the child cleans up its
   data, it will free the parent's descriptor while the parent is still
   using it.

   In the duplication function, set the child's user_event_mm to NULL
   before testing if the allocation succeeded, and when it exits it will
   not free the parent's descriptor.

 - Fix retry exhaustion in simple ring buffer reader swap

   simple_ring_buffer_swap_reader_page() starts with retry set to 8 and
   post-decrements it only after a failed link replacement. On the final
   attempt, a successful replacement leaves retry at zero, while a
   failed replacement leaves it at -1.

   But the check for success expects the retry value to be non-zero and
   exits with an error on zero. This is the opposite result. Fix it.

 - Fail nicely when the remote swap_reader_page() returns an error

   Currently, if the swap_reader_page() of a remote buffer fails, it
   triggers a WARN_ON_ONCE() and continues normally. Instead, have it
   exit with an error and a pr_warn() print instead of a full WARNING.

* tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Stop remote reader update when page swap fails
  tracing: Fix retry exhaustion in simple ring buffer reader swap
  tracing/user_events: Clear copied tracing state before fork duplication
  samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-multi-modify
  samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-modify
  eventfs: Initialize ei->children and ei->list in init_ei()
  tracing: Fix use-after-free in trace_pipe read on sub-buffer order change
  tracing: Fix crash passing ERR_PTR to kthread_stop()
  tracing: Fix use-after-free with same-name named triggers
  tracing: Fix logged instance name on creation failure

1 files changed, 112 insertions, 0 deletions

diff --git a/Documentation/driver-api/gpio/intro.rst b/Documentation/driver-api/gpio/intro.rst
new file mode 100644
index 000000000..5936a9c57
--- /dev/null
+++ b/Documentation/driver-api/gpio/intro.rst
@@ -0,0 +1,112 @@
+============
+Introduction
+============
+
+
+GPIO Interfaces
+===============
+
+The documents in this directory give detailed instructions on how to access
+GPIOs in drivers, and how to write a driver for a device that provides GPIOs
+itself.
+
+
+What is a GPIO?
+===============
+
+A "General Purpose Input/Output" (GPIO) is a flexible software-controlled
+digital signal. They are provided from many kinds of chips, and are familiar
+to Linux developers working with embedded and custom hardware. Each GPIO
+represents a bit connected to a particular pin, or "ball" on Ball Grid Array
+(BGA) packages. Board schematics show which external hardware connects to
+which GPIOs. Drivers can be written generically, so that board setup code
+passes such pin configuration data to drivers.
+
+System-on-Chip (SOC) processors heavily rely on GPIOs. In some cases, every
+non-dedicated pin can be configured as a GPIO; and most chips have at least
+several dozen of them. Programmable logic devices (like FPGAs) can easily
+provide GPIOs; multifunction chips like power managers, and audio codecs
+often have a few such pins to help with pin scarcity on SOCs; and there are
+also "GPIO Expander" chips that connect using the I2C or SPI serial buses.
+Most PC southbridges have a few dozen GPIO-capable pins (with only the BIOS
+firmware knowing how they're used).
+
+The exact capabilities of GPIOs vary between systems. Common options:
+
+  - Output values are writable (high=1, low=0). Some chips also have
+    options about how that value is driven, so that for example only one
+    value might be driven, supporting "wire-OR" and similar schemes for the
+    other value (notably, "open drain" signaling).
+
+  - Input values are likewise readable (1, 0). Some chips support readback
+    of pins configured as "output", which is very useful in such "wire-OR"
+    cases (to support bidirectional signaling). GPIO controllers may have
+    input de-glitch/debounce logic, sometimes with software controls.
+
+  - Inputs can often be used as IRQ signals, often edge triggered but
+    sometimes level triggered. Such IRQs may be configurable as system
+    wakeup events, to wake the system from a low power state.
+
+  - Usually a GPIO will be configurable as either input or output, as needed
+    by different product boards; single direction ones exist too.
+
+  - Most GPIOs can be accessed while holding spinlocks, but those accessed
+    through a serial bus normally can't. Some systems support both types.
+
+On a given board each GPIO is used for one specific purpose like monitoring
+MMC/SD card insertion/removal, detecting card write-protect status, driving
+a LED, configuring a transceiver, bit-banging a serial bus, poking a hardware
+watchdog, sensing a switch, and so on.
+
+
+Common GPIO Properties
+======================
+
+These properties are met through all the other documents of the GPIO interface
+and it is useful to understand them, especially if you need to define GPIO
+mappings.
+
+Active-High and Active-Low
+--------------------------
+It is natural to assume that a GPIO is "active" when its output signal is 1
+("high"), and inactive when it is 0 ("low"). However in practice the signal of a
+GPIO may be inverted before is reaches its destination, or a device could decide
+to have different conventions about what "active" means. Such decisions should
+be transparent to device drivers, therefore it is possible to define a GPIO as
+being either active-high ("1" means "active", the default) or active-low ("0"
+means "active") so that drivers only need to worry about the logical signal and
+not about what happens at the line level.
+
+Open Drain and Open Source
+--------------------------
+Sometimes shared signals need to use "open drain" (where only the low signal
+level is actually driven), or "open source" (where only the high signal level is
+driven) signaling. That term applies to CMOS transistors; "open collector" is
+used for TTL. A pullup or pulldown resistor causes the high or low signal level.
+This is sometimes called a "wire-AND"; or more practically, from the negative
+logic (low=true) perspective this is a "wire-OR".
+
+One common example of an open drain signal is a shared active-low IRQ line.
+Also, bidirectional data bus signals sometimes use open drain signals.
+
+Some GPIO controllers directly support open drain and open source outputs; many
+don't. When you need open drain signaling but your hardware doesn't directly
+support it, there's a common idiom you can use to emulate it with any GPIO pin
+that can be used as either an input or an output:
+
+ **LOW**: ``gpiod_direction_output(gpio, 0)`` ... this drives the signal and
+ overrides the pullup.
+
+ **HIGH**: ``gpiod_direction_input(gpio)`` ... this turns off the output, so
+ the pullup (or some other device) controls the signal.
+
+The same logic can be applied to emulate open source signaling, by driving the
+high signal and configuring the GPIO as input for low. This open drain/open
+source emulation can be handled transparently by the GPIO framework.
+
+If you are "driving" the signal high but gpiod_get_value(gpio) reports a low
+value (after the appropriate rise time passes), you know some other component is
+driving the shared signal low. That's not necessarily an error. As one common
+example, that's how I2C clocks are stretched:  a slave that needs a slower clock
+delays the rising edge of SCK, and the I2C master adjusts its signaling rate
+accordingly.