iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 48 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.yaml b/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.yaml
new file mode 100644
index 000000000..2ff204109
--- /dev/null
+++ b/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/siox/eckelmann,siox-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Eckelmann SIOX GPIO bus
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: eckelmann,siox-gpio
+
+  din-gpios:
+    maxItems: 1
+
+  dout-gpios:
+    maxItems: 1
+
+  dclk-gpios:
+    maxItems: 1
+
+  dld-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - din-gpios
+  - dout-gpios
+  - dclk-gpios
+  - dld-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    siox {
+        compatible = "eckelmann,siox-gpio";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_siox>;
+
+        din-gpios = <&gpio6 11 0>;
+        dout-gpios = <&gpio6 8 0>;
+        dclk-gpios = <&gpio6 9 0>;
+        dld-gpios = <&gpio6 10 0>;
+    };