From e24328974a88aa8541e94e8bb8dfa2ade1b3c45d Mon Sep 17 00:00:00 2001 From: Donggeun Yoo Date: Wed, 2 Sep 2026 00:21:26 +0900 Subject: iio: proximity: vl53l0x-i2c: claim direct mode for raw reads vl53l0x_read_raw() starts a single-shot ranging measurement and reads back the result. Once the triggered buffer is enabled the sensor runs in continuous mode and its data-ready interrupt is routed to the trigger, so a concurrent in_distance_raw read disturbs the streaming setup and never gets its completion, returning -ETIMEDOUT. The original submission claimed direct mode here, but it was dropped during review because the driver had no buffer support at the time [1]. Continuous (buffered) mode was later added without restoring the claim [2], reintroducing the conflict. Reject direct reads while buffered capture is active by claiming direct mode around the measurement, as the vl53l1x sibling already does. Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support") Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1] Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2] Signed-off-by: Donggeun Yoo Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- .../bindings/siox/eckelmann,siox-gpio.yaml | 48 ++++++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.yaml (limited to 'Documentation/devicetree/bindings/siox') diff --git a/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.yaml b/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.yaml new file mode 100644 index 000000000..2ff204109 --- /dev/null +++ b/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/siox/eckelmann,siox-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Eckelmann SIOX GPIO bus + +maintainers: + - Frank Li + +properties: + compatible: + const: eckelmann,siox-gpio + + din-gpios: + maxItems: 1 + + dout-gpios: + maxItems: 1 + + dclk-gpios: + maxItems: 1 + + dld-gpios: + maxItems: 1 + +required: + - compatible + - din-gpios + - dout-gpios + - dclk-gpios + - dld-gpios + +additionalProperties: false + +examples: + - | + siox { + compatible = "eckelmann,siox-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_siox>; + + din-gpios = <&gpio6 11 0>; + dout-gpios = <&gpio6 8 0>; + dclk-gpios = <&gpio6 9 0>; + dld-gpios = <&gpio6 10 0>; + }; -- cgit v1.3.1