diff options
| author | Donggeun Yoo <donggeunyoo.kernel@gmail.com> | 2026-09-02 00:21:26 +0900 |
|---|---|---|
| committer | Jonathan Cameron <jonathan.cameron@oss.qualcomm.com> | 2026-09-07 02:24:53 +0100 |
| commit | e24328974a88aa8541e94e8bb8dfa2ade1b3c45d (patch) | |
| tree | 43a2533acc955d11f5cb8be1ecba0ab8ba4cbb1e /Documentation/admin-guide/media/raspberrypi-pisp-be.dot | |
| download | linux-stable-e24328974a88aa8541e94e8bb8dfa2ade1b3c45d.tar.gz linux-stable-e24328974a88aa8541e94e8bb8dfa2ade1b3c45d.zip | |
iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted
vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.
The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.
Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.
Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Diffstat (limited to 'Documentation/admin-guide/media/raspberrypi-pisp-be.dot')
| -rw-r--r-- | Documentation/admin-guide/media/raspberrypi-pisp-be.dot | 20 |
1 files changed, 20 insertions, 0 deletions
diff --git a/Documentation/admin-guide/media/raspberrypi-pisp-be.dot b/Documentation/admin-guide/media/raspberrypi-pisp-be.dot new file mode 100644 index 000000000..55671dc1d --- /dev/null +++ b/Documentation/admin-guide/media/raspberrypi-pisp-be.dot @@ -0,0 +1,20 @@ +digraph board { + rankdir=TB + n00000001 [label="{{<port0> 0 | <port1> 1 | <port2> 2 | <port7> 7} | pispbe\n | {<port3> 3 | <port4> 4 | <port5> 5 | <port6> 6}}", shape=Mrecord, style=filled, fillcolor=green] + n00000001:port3 -> n0000001c [style=bold] + n00000001:port4 -> n00000022 [style=bold] + n00000001:port5 -> n00000028 [style=bold] + n00000001:port6 -> n0000002e [style=bold] + n0000000a [label="pispbe-input\n/dev/video0", shape=box, style=filled, fillcolor=yellow] + n0000000a -> n00000001:port0 [style=bold] + n00000010 [label="pispbe-tdn_input\n/dev/video1", shape=box, style=filled, fillcolor=yellow] + n00000010 -> n00000001:port1 [style=bold] + n00000016 [label="pispbe-stitch_input\n/dev/video2", shape=box, style=filled, fillcolor=yellow] + n00000016 -> n00000001:port2 [style=bold] + n0000001c [label="pispbe-output0\n/dev/video3", shape=box, style=filled, fillcolor=yellow] + n00000022 [label="pispbe-output1\n/dev/video4", shape=box, style=filled, fillcolor=yellow] + n00000028 [label="pispbe-tdn_output\n/dev/video5", shape=box, style=filled, fillcolor=yellow] + n0000002e [label="pispbe-stitch_output\n/dev/video6", shape=box, style=filled, fillcolor=yellow] + n00000034 [label="pispbe-config\n/dev/video7", shape=box, style=filled, fillcolor=yellow] + n00000034 -> n00000001:port7 [style=bold] +} |