From e24328974a88aa8541e94e8bb8dfa2ade1b3c45d Mon Sep 17 00:00:00 2001 From: Donggeun Yoo Date: Wed, 2 Sep 2026 00:21:26 +0900 Subject: iio: proximity: vl53l0x-i2c: claim direct mode for raw reads vl53l0x_read_raw() starts a single-shot ranging measurement and reads back the result. Once the triggered buffer is enabled the sensor runs in continuous mode and its data-ready interrupt is routed to the trigger, so a concurrent in_distance_raw read disturbs the streaming setup and never gets its completion, returning -ETIMEDOUT. The original submission claimed direct mode here, but it was dropped during review because the driver had no buffer support at the time [1]. Continuous (buffered) mode was later added without restoring the claim [2], reintroducing the conflict. Reject direct reads while buffered capture is active by claiming direct mode around the measurement, as the vl53l1x sibling already does. Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support") Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1] Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2] Signed-off-by: Donggeun Yoo Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- .../admin-guide/media/raspberrypi-pisp-be.dot | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/admin-guide/media/raspberrypi-pisp-be.dot (limited to 'Documentation/admin-guide/media/raspberrypi-pisp-be.dot') diff --git a/Documentation/admin-guide/media/raspberrypi-pisp-be.dot b/Documentation/admin-guide/media/raspberrypi-pisp-be.dot new file mode 100644 index 000000000..55671dc1d --- /dev/null +++ b/Documentation/admin-guide/media/raspberrypi-pisp-be.dot @@ -0,0 +1,20 @@ +digraph board { + rankdir=TB + n00000001 [label="{{ 0 | 1 | 2 | 7} | pispbe\n | { 3 | 4 | 5 | 6}}", shape=Mrecord, style=filled, fillcolor=green] + n00000001:port3 -> n0000001c [style=bold] + n00000001:port4 -> n00000022 [style=bold] + n00000001:port5 -> n00000028 [style=bold] + n00000001:port6 -> n0000002e [style=bold] + n0000000a [label="pispbe-input\n/dev/video0", shape=box, style=filled, fillcolor=yellow] + n0000000a -> n00000001:port0 [style=bold] + n00000010 [label="pispbe-tdn_input\n/dev/video1", shape=box, style=filled, fillcolor=yellow] + n00000010 -> n00000001:port1 [style=bold] + n00000016 [label="pispbe-stitch_input\n/dev/video2", shape=box, style=filled, fillcolor=yellow] + n00000016 -> n00000001:port2 [style=bold] + n0000001c [label="pispbe-output0\n/dev/video3", shape=box, style=filled, fillcolor=yellow] + n00000022 [label="pispbe-output1\n/dev/video4", shape=box, style=filled, fillcolor=yellow] + n00000028 [label="pispbe-tdn_output\n/dev/video5", shape=box, style=filled, fillcolor=yellow] + n0000002e [label="pispbe-stitch_output\n/dev/video6", shape=box, style=filled, fillcolor=yellow] + n00000034 [label="pispbe-config\n/dev/video7", shape=box, style=filled, fillcolor=yellow] + n00000034 -> n00000001:port7 [style=bold] +} -- cgit v1.3.1