Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 192 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
new file mode 100644
index 000000000..ed46b37ab
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
@@ -0,0 +1,192 @@
+What:		/sys/class/leds/<led>/device_name
+Date:		Dec 2017
+KernelVersion:	4.16
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Specifies the network device name to monitor.
+
+What:		/sys/class/leds/<led>/interval
+Date:		Dec 2017
+KernelVersion:	4.16
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Specifies the duration of the LED blink in milliseconds.
+		Defaults to 50 ms.
+
+		When offloaded is true, the interval value MUST be set to the
+		default value and cannot be changed.
+		Trying to set any value in this specific mode will return
+		an EINVAL error.
+
+What:		/sys/class/leds/<led>/link
+Date:		Dec 2017
+KernelVersion:	4.16
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link state of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link state
+		of the named network device.
+		Setting this value also immediately changes the LED state.
+
+
+What:		/sys/class/leds/<led>/tx
+Date:		Dec 2017
+KernelVersion:	4.16
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal transmission of data on the named network device.
+
+		If set to 0 (default), the LED will not blink on transmission.
+
+		If set to 1, the LED will blink for the milliseconds specified
+		in interval to signal transmission.
+
+		When offloaded is true, the blink interval is controlled by
+		hardware and won't reflect the value set in interval.
+
+What:		/sys/class/leds/<led>/rx
+Date:		Dec 2017
+KernelVersion:	4.16
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal reception of data on the named network device.
+
+		If set to 0 (default), the LED will not blink on reception.
+
+		If set to 1, the LED will blink for the milliseconds specified
+		in interval to signal reception.
+
+		When offloaded is true, the blink interval is controlled by
+		hardware and won't reflect the value set in interval.
+
+What:		/sys/class/leds/<led>/offloaded
+Date:		Jun 2023
+KernelVersion:	6.5
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Communicate whether the LED trigger modes are offloaded to
+		hardware or whether software fallback is used.
+
+		If 0, the LED is using software fallback to blink.
+
+		If 1, the LED blinking in requested mode is offloaded to
+		hardware.
+
+What:		/sys/class/leds/<led>/link_10
+Date:		Jun 2023
+KernelVersion:	6.5
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link speed state of 10Mbps of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link state
+		speed of 10MBps of the named network device.
+		Setting this value also immediately changes the LED state.
+
+		Present only if the named network device supports 10Mbps link speed.
+
+What:		/sys/class/leds/<led>/link_100
+Date:		Jun 2023
+KernelVersion:	6.5
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link speed state of 100Mbps of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link state
+		speed of 100Mbps of the named network device.
+		Setting this value also immediately changes the LED state.
+
+		Present only if the named network device supports 100Mbps link speed.
+
+What:		/sys/class/leds/<led>/link_1000
+Date:		Jun 2023
+KernelVersion:	6.5
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link speed state of 1000Mbps of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link state
+		speed of 1000Mbps of the named network device.
+		Setting this value also immediately changes the LED state.
+
+		Present only if the named network device supports 1000Mbps link speed.
+
+What:		/sys/class/leds/<led>/link_2500
+Date:		Nov 2023
+KernelVersion:	6.8
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link speed state of 2500Mbps of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link state
+		speed of 2500Mbps of the named network device.
+		Setting this value also immediately changes the LED state.
+
+		Present only if the named network device supports 2500Mbps link speed.
+
+What:		/sys/class/leds/<led>/link_5000
+Date:		Nov 2023
+KernelVersion:	6.8
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link speed state of 5000Mbps of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link state
+		speed of 5000Mbps of the named network device.
+		Setting this value also immediately changes the LED state.
+
+		Present only if the named network device supports 5000Mbps link speed.
+
+What:		/sys/class/leds/<led>/link_10000
+Date:		Nov 2023
+KernelVersion:	6.8
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link speed state of 10000Mbps of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link state
+		speed of 10000Mbps of the named network device.
+		Setting this value also immediately changes the LED state.
+
+		Present only if the named network device supports 10000Mbps link speed.
+
+What:		/sys/class/leds/<led>/half_duplex
+Date:		Jun 2023
+KernelVersion:	6.5
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link half duplex state of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link half
+		duplex state of the named network device.
+		Setting this value also immediately changes the LED state.
+
+What:		/sys/class/leds/<led>/full_duplex
+Date:		Jun 2023
+KernelVersion:	6.5
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link full duplex state of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link full
+		duplex state of the named network device.
+		Setting this value also immediately changes the LED state.