From f4cdf7ca9a1fdcca413157df19753f388a5a224e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 19 Aug 2026 10:09:22 -0700 Subject: Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - v4l2-core: added ISP statistics support and per-block validation - v4l2-core: Allow unknown HDR10 white point and luminance - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor - New codec: Milos: VPU v2.0 codec support - isp driver: gained support for Dreamchip RPPX1 ISP framework - vsp1 driver: gained support for RZ/T2H and RZ/N2H - Novalake driver: gained CVS support for new NVL hardware - dvb-core: fix feed leak on failed DMX_ADD_PID - several driver fixes, cleanups and minor improvements * tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits) media: ipu-bridge: check all DMI entries when overriding sensor rotation media: v4l2-async: avoid deleting unlinked ASC entry on link error media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement media: intel/ipu6: fix async notifier cleanup leak on parse error media: staging/ipu7: fix async notifier UAF on probe error path media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem() media: rcar-isp: Fix VSPX reference leaks media: rcar-isp: Release ISPCORE resources media: i2c: imx415: Release runtime PM reference on VBLANK error media: i2c: imx415: Return test pattern write errors media: renesas: vsp1: Declare index variables in for loop statement media: renesas: vsp1: Make reset control optional to support platforms without a reset line media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs media: nxp: imx8-isi: Add additional 32-bit RGB format support media: nxp: imx8-isi: Add 16-bit raw Bayer format support media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks media: nxp: imx8-isi: Correct color map between V4L2 and ISI ... --- .../ABI/testing/sysfs-class-led-trigger-netdev | 192 +++++++++++++++++++++ 1 file changed, 192 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-class-led-trigger-netdev (limited to 'Documentation/ABI/testing/sysfs-class-led-trigger-netdev') diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev new file mode 100644 index 000000000..ed46b37ab --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev @@ -0,0 +1,192 @@ +What: /sys/class/leds//device_name +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Specifies the network device name to monitor. + +What: /sys/class/leds//interval +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Specifies the duration of the LED blink in milliseconds. + Defaults to 50 ms. + + When offloaded is true, the interval value MUST be set to the + default value and cannot be changed. + Trying to set any value in this specific mode will return + an EINVAL error. + +What: /sys/class/leds//link +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link state of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + of the named network device. + Setting this value also immediately changes the LED state. + + +What: /sys/class/leds//tx +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Signal transmission of data on the named network device. + + If set to 0 (default), the LED will not blink on transmission. + + If set to 1, the LED will blink for the milliseconds specified + in interval to signal transmission. + + When offloaded is true, the blink interval is controlled by + hardware and won't reflect the value set in interval. + +What: /sys/class/leds//rx +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Signal reception of data on the named network device. + + If set to 0 (default), the LED will not blink on reception. + + If set to 1, the LED will blink for the milliseconds specified + in interval to signal reception. + + When offloaded is true, the blink interval is controlled by + hardware and won't reflect the value set in interval. + +What: /sys/class/leds//offloaded +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Communicate whether the LED trigger modes are offloaded to + hardware or whether software fallback is used. + + If 0, the LED is using software fallback to blink. + + If 1, the LED blinking in requested mode is offloaded to + hardware. + +What: /sys/class/leds//link_10 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 10Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 10MBps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 10Mbps link speed. + +What: /sys/class/leds//link_100 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 100Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 100Mbps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 100Mbps link speed. + +What: /sys/class/leds//link_1000 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 1000Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 1000Mbps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 1000Mbps link speed. + +What: /sys/class/leds//link_2500 +Date: Nov 2023 +KernelVersion: 6.8 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 2500Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 2500Mbps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 2500Mbps link speed. + +What: /sys/class/leds//link_5000 +Date: Nov 2023 +KernelVersion: 6.8 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 5000Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 5000Mbps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 5000Mbps link speed. + +What: /sys/class/leds//link_10000 +Date: Nov 2023 +KernelVersion: 6.8 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 10000Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 10000Mbps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 10000Mbps link speed. + +What: /sys/class/leds//half_duplex +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link half duplex state of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link half + duplex state of the named network device. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds//full_duplex +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link full duplex state of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link full + duplex state of the named network device. + Setting this value also immediately changes the LED state. -- cgit v1.3.1