Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 134 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-bdi b/Documentation/ABI/testing/sysfs-class-bdi
new file mode 100644
index 000000000..0d2abd88a
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-bdi
@@ -0,0 +1,134 @@
+What:		/sys/class/bdi/<bdi>/
+Date:		January 2008
+Contact:	Peter Zijlstra <a.p.zijlstra@chello.nl>
+Description:
+
+Provide a place in sysfs for the backing_dev_info object.  This allows
+setting and retrieving various BDI specific variables.
+
+The <bdi> identifier can be either of the following:
+
+MAJOR:MINOR
+
+	Device number for block devices, or value of st_dev on
+	non-block filesystems which provide their own BDI, such as NFS
+	and FUSE.
+
+MAJOR:MINOR-fuseblk
+
+	Value of st_dev on fuseblk filesystems.
+
+default
+
+	The default backing dev, used for non-block device backed
+	filesystems which do not provide their own BDI.
+
+What:		/sys/class/bdi/<bdi>/read_ahead_kb
+Date:		January 2008
+Contact:	Peter Zijlstra <a.p.zijlstra@chello.nl>
+Description:
+	Size of the read-ahead window in kilobytes
+
+	(read-write)
+What:		/sys/class/bdi/<bdi>/min_ratio
+Date:		January 2008
+Contact:	Peter Zijlstra <a.p.zijlstra@chello.nl>
+Description:
+	Under normal circumstances each device is given a part of the
+	total write-back cache that relates to its current average
+	writeout speed in relation to the other devices.
+
+	The 'min_ratio' parameter allows assigning a minimum
+	percentage of the write-back cache to a particular device.
+	For example, this is useful for providing a minimum QoS.
+
+	(read-write)
+
+What:		/sys/class/bdi/<bdi>/min_ratio_fine
+Date:		November 2022
+Contact:	Stefan Roesch <shr@devkernel.io>
+Description:
+	Under normal circumstances each device is given a part of the
+	total write-back cache that relates to its current average
+	writeout speed in relation to the other devices.
+
+	The 'min_ratio_fine' parameter allows assigning a minimum reserve
+	of the write-back cache to a particular device. The value is
+	expressed as part of 1 million. For example, this is useful for
+	providing a minimum QoS.
+
+	(read-write)
+
+What:		/sys/class/bdi/<bdi>/max_ratio
+Date:		January 2008
+Contact:	Peter Zijlstra <a.p.zijlstra@chello.nl>
+Description:
+	Allows limiting a particular device to use not more than the
+	given percentage of the write-back cache.  This is useful in
+	situations where we want to avoid one device taking all or
+	most of the write-back cache.  For example in case of an NFS
+	mount that is prone to get stuck, or a FUSE mount which cannot
+	be trusted to play fair.
+
+	(read-write)
+
+What:		/sys/class/bdi/<bdi>/max_ratio_fine
+Date:		November 2022
+Contact:	Stefan Roesch <shr@devkernel.io>
+Description:
+	Allows limiting a particular device to use not more than the
+	given value of the write-back cache.  The value is given as part
+	of 1 million. This is useful in situations where we want to avoid
+	one device taking all or most of the write-back cache.  For example
+	in case of an NFS mount that is prone to get stuck, or a FUSE mount
+	which cannot be trusted to play fair.
+
+	(read-write)
+
+What:		/sys/class/bdi/<bdi>/min_bytes
+Date:		October 2022
+Contact:	Stefan Roesch <shr@devkernel.io>
+Description:
+	Under normal circumstances each device is given a part of the
+	total write-back cache that relates to its current average
+	writeout speed in relation to the other devices.
+
+	The 'min_bytes' parameter allows assigning a minimum
+	percentage of the write-back cache to a particular device
+	expressed in bytes.
+	For example, this is useful for providing a minimum QoS.
+
+	(read-write)
+
+What:		/sys/class/bdi/<bdi>/max_bytes
+Date:		October 2022
+Contact:	Stefan Roesch <shr@devkernel.io>
+Description:
+	Allows limiting a particular device to use not more than the
+	given 'max_bytes' of the write-back cache.  This is useful in
+	situations where we want to avoid one device taking all or
+	most of the write-back cache.  For example in case of an NFS
+	mount that is prone to get stuck, a FUSE mount which cannot be
+	trusted to play fair, or a nbd device.
+
+	(read-write)
+
+What:		/sys/class/bdi/<bdi>/strict_limit
+Date:		October 2022
+Contact:	Stefan Roesch <shr@devkernel.io>
+Description:
+	Forces per-BDI checks for the share of given device in the write-back
+	cache even before the global background dirty limit is reached. This
+	is useful in situations where the global limit is much higher than
+	affordable for given relatively slow (or untrusted) device. Turning
+	strictlimit on has no visible effect if max_ratio is equal to 100%.
+
+	(read-write)
+What:		/sys/class/bdi/<bdi>/stable_pages_required
+Date:		January 2008
+Contact:	Peter Zijlstra <a.p.zijlstra@chello.nl>
+Description:
+	If set, the backing device requires that all pages comprising a write
+	request must not be changed until writeout is complete.
+
+	(read-only)