From cf9610f9116d55c5a66ef9f1faecacabd93a9322 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Aug 2026 08:46:03 -0700 Subject: Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use the non-blocking mux_state_try_select() in the generic MUX pin control back-end - Free pin maps on pinctrl_generic_to_map() failure in the core helpers New hardware pin control: - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC (this is for the low power audio, LPASS = Low Power Audio SubSystem portions) - Upboard support on top of the Intel pin controller - Apple T6030 and T6031 support (just compatible strings) - Samsung Exynos 8855 SoC - Mediatek MT6858 SoC - Rockchip RK3308B and RV1106 SoCs - Airoha EN7523 and AN7563 SoCs Improvements: - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable - Qualcomm improvements on top of the Qualcomm PDC (power domain controller) irqchip improvements from tglx:s tree - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups - The NPCM8xx driver has been put into shape fixing many pin and group definitions - Some non-urgent Tegra 264 pin assignments are fixed up - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and pin assignments, missing features etc" * tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits) dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema pinctrl: meson: sync some modify from A4 pinctrl: meson: a4: Add input enable pin configuration pinctrl: realtek: rtd1625: remove unused group name spdif_sel pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13 dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema Revert "Merge branch 'ib-rsk7204' into devel" pinctrl: rockchip: Add RV1106 pinctrl support dt-bindings: pinctrl: rockchip: Add RV1106 compatible pinctrl: rockchip: Decode drive strength in the get function pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable pinctrl: airoha: add support of an7563 SoC dt-bindings: pinctrl: airoha: add support of an7563 pin controller pinctrl: airoha: try to find chip scu node by phandle first pinctrl: airoha: add support of en7523 SoC dt-bindings: pinctrl: airoha: add support of en7523 pin controller pinctrl: airoha: an7583: add support for olt pinmux pinctrl: airoha: an7583: add support for pon_alt pinmux pinctrl: airoha: an7583: add support for npu_uart pinmux dt-bindings: pinctrl: airoha: an7583: add missed features ... --- Documentation/ABI/testing/sysfs-class-bdi | 134 ++++++++++++++++++++++++++++++ 1 file changed, 134 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-class-bdi (limited to 'Documentation/ABI/testing/sysfs-class-bdi') diff --git a/Documentation/ABI/testing/sysfs-class-bdi b/Documentation/ABI/testing/sysfs-class-bdi new file mode 100644 index 000000000..0d2abd88a --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-bdi @@ -0,0 +1,134 @@ +What: /sys/class/bdi// +Date: January 2008 +Contact: Peter Zijlstra +Description: + +Provide a place in sysfs for the backing_dev_info object. This allows +setting and retrieving various BDI specific variables. + +The identifier can be either of the following: + +MAJOR:MINOR + + Device number for block devices, or value of st_dev on + non-block filesystems which provide their own BDI, such as NFS + and FUSE. + +MAJOR:MINOR-fuseblk + + Value of st_dev on fuseblk filesystems. + +default + + The default backing dev, used for non-block device backed + filesystems which do not provide their own BDI. + +What: /sys/class/bdi//read_ahead_kb +Date: January 2008 +Contact: Peter Zijlstra +Description: + Size of the read-ahead window in kilobytes + + (read-write) +What: /sys/class/bdi//min_ratio +Date: January 2008 +Contact: Peter Zijlstra +Description: + Under normal circumstances each device is given a part of the + total write-back cache that relates to its current average + writeout speed in relation to the other devices. + + The 'min_ratio' parameter allows assigning a minimum + percentage of the write-back cache to a particular device. + For example, this is useful for providing a minimum QoS. + + (read-write) + +What: /sys/class/bdi//min_ratio_fine +Date: November 2022 +Contact: Stefan Roesch +Description: + Under normal circumstances each device is given a part of the + total write-back cache that relates to its current average + writeout speed in relation to the other devices. + + The 'min_ratio_fine' parameter allows assigning a minimum reserve + of the write-back cache to a particular device. The value is + expressed as part of 1 million. For example, this is useful for + providing a minimum QoS. + + (read-write) + +What: /sys/class/bdi//max_ratio +Date: January 2008 +Contact: Peter Zijlstra +Description: + Allows limiting a particular device to use not more than the + given percentage of the write-back cache. This is useful in + situations where we want to avoid one device taking all or + most of the write-back cache. For example in case of an NFS + mount that is prone to get stuck, or a FUSE mount which cannot + be trusted to play fair. + + (read-write) + +What: /sys/class/bdi//max_ratio_fine +Date: November 2022 +Contact: Stefan Roesch +Description: + Allows limiting a particular device to use not more than the + given value of the write-back cache. The value is given as part + of 1 million. This is useful in situations where we want to avoid + one device taking all or most of the write-back cache. For example + in case of an NFS mount that is prone to get stuck, or a FUSE mount + which cannot be trusted to play fair. + + (read-write) + +What: /sys/class/bdi//min_bytes +Date: October 2022 +Contact: Stefan Roesch +Description: + Under normal circumstances each device is given a part of the + total write-back cache that relates to its current average + writeout speed in relation to the other devices. + + The 'min_bytes' parameter allows assigning a minimum + percentage of the write-back cache to a particular device + expressed in bytes. + For example, this is useful for providing a minimum QoS. + + (read-write) + +What: /sys/class/bdi//max_bytes +Date: October 2022 +Contact: Stefan Roesch +Description: + Allows limiting a particular device to use not more than the + given 'max_bytes' of the write-back cache. This is useful in + situations where we want to avoid one device taking all or + most of the write-back cache. For example in case of an NFS + mount that is prone to get stuck, a FUSE mount which cannot be + trusted to play fair, or a nbd device. + + (read-write) + +What: /sys/class/bdi//strict_limit +Date: October 2022 +Contact: Stefan Roesch +Description: + Forces per-BDI checks for the share of given device in the write-back + cache even before the global background dirty limit is reached. This + is useful in situations where the global limit is much higher than + affordable for given relatively slow (or untrusted) device. Turning + strictlimit on has no visible effect if max_ratio is equal to 100%. + + (read-write) +What: /sys/class/bdi//stable_pages_required +Date: January 2008 +Contact: Peter Zijlstra +Description: + If set, the backing device requires that all pages comprising a write + request must not be changed until writeout is complete. + + (read-only) -- cgit v1.3.1