| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fix from Bjorn Helgaas:
- Allow driver to use AtomicOps if already enabled by hypervisor; fixes
regression when Root Port is not visible in a guest (Nikola Prica)
* tag 'pci-v7.3-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Accept AtomicOps already enabled by the hypervisor
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix a task_work add use-after-free with SQPOLL.
The sqpoll thread could pop and complete the last request while
io_req_normal_work_add() was still looking at them after the mpscq
push.
Use the same approach as DEFER_TASKRUN to protect from that, holding
an RCU read lock across the add, and have exit wait for an RCU grace
period for SQPOLL rings as well.
- CQE32 ring fixes: correct the free entry check for 32b CQEs, zero the
big_cqe for aux CQEs, and only post the dummy skip CQE on CQE_MIXED
rings
- Mark the source filter table as COW when cloning bpf filters, so
registering another filter on the source doesn't modify the shared
table in place
- Initialize the task context before running the BPF loop
- Requeue zcrx multishot receives stopped by a local resource
- End a TX_TIMESTAMP multishot cmd when the CQ is full (lollipopkit)
* tag 'io_uring-7.3-20261002' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix task_work add use-after-free with SQPOLL
io_uring/cmd_net: end TX_TIMESTAMP multishot when the CQ is full
io_uring/zcrx: requeue multishot receives stopped by a local resource
io_uring: initialize task context before running the BPF loop
io_uring: zero big_cqe for aux CQEs on CQE32 rings
io_uring: fix free entry check for 32b CQEs on CQE32 rings
io_uring: only post the dummy skip CQE on CQE_MIXED rings
io_uring/bpf_filter: mark source as COW when cloning filters
|
|
pci_enable_atomic_ops_to_root() currently fails when no Root Port is
visible. That is common in passthrough guests (ESXi, Hyper-V): the Endpoint
is assigned to the VM, but the Root Port above it is not visible in the
guest topology.
In those setups the hypervisor may already have enabled AtomicOp Requester
Enable on the device. If PCI_EXP_DEVCTL2_ATOMIC_REQ is set, treat AtomicOps
as already enabled and return success instead of failing the Root Port
walk.
After 1ae8c4ce1570 ("PCI: Enable AtomicOps only if Root Port supports
them"), pci_enable_atomic_ops_to_root() always returns failure if the Root
Port is not visible, so drivers don't use atomics when they could. On
systems where the Root Port is not visible but *does* support AtomicOps,
this is a regression: prior to 1ae8c4ce1570, it enabled AtomicOps in the
endpoint and returned success.
Fixes: 1ae8c4ce1570 ("PCI: Enable AtomicOps only if Root Port supports them")
Signed-off-by: Nikola Prica <nikola.prica@amd.com>
[bhelgaas: commit log, code comment]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Link: https://patch.msgid.link/20260921111903.978687-1-nikprica@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix error output of boot instance creation failure
Currently if a boot instance creation fails, instead of printing out
the name of the instance that failed, it prints "(null)". That is
because it prints "cur_str" that had already been processed by
strsep(). Print the saved name instead.
While at it, print the error code of the failure.
- Fix use-after-free for same named historgrams
Histograms can be named so that they can be used in multiple events.
But if the named histogram has a variable attached, the second event
that uses the named histogram which duplicates it and needs to free
the original after duplication leaves the old variable in place and
still visible. If another histogram uses than variable, it will use
the stale one which will try to reference the freed duplicate
histogram and crash the kernel.
Free the duplicate variables along with the duplicated histogram
data.
- Check return value of kthread_run() in event self test
The events self tests uses a kthread for testing but does not check
if it succeeded in creating a kthread. If the kthread creation were
to fail, the code will still try to call kthread_stop() on the error
returned.
- Fix race between reading trace_pipe and updating subbuffer size
If a user is reading the trace_pipe file at the same time they update
the ring buffer sub-buffer size, can cause the trace_pipe read to
read stale data. Add trace_access_lock() around updating the ring
buffer sub-buffer size.
- Fix eventfs_inode on failure path in creation of the events directory
In the creation of the "events" directory, if after allocating the
eventfs_inode a failure is detected, it calls cleanup_ei() which
calls free_ei(). The free_ei() will test if eventfs_inode being freed
has no children. It is a bug if it does. But on the failure case of
the creation of the "events" directory, the children lists have not
yet been initialized and the free will trigger a warning because
list_empty() on an uninitialized list returns false.
Move the initialization into init_ei() where it makes more sense and
makes sure that a created eventfs_inode has its lists initialized
upon creation.
- Check return value of kthread_run() in ftrace direct sample code
The sample code that shows how to use the ftrace direct calls does
not test the return of kthread_run() to see if it succeeds. Return a
failure if the kthread_run() doesn't succeed.
- Clear user events state on fork in case of alloc failure
On fork, the child gets a pointer to the parent's user events state.
It makes a copy of it then updates the child's pointer to it. But if
the allocation fails, the duplication function leaves the child with
a pointer to its parent's descriptor. When the child cleans up its
data, it will free the parent's descriptor while the parent is still
using it.
In the duplication function, set the child's user_event_mm to NULL
before testing if the allocation succeeded, and when it exits it will
not free the parent's descriptor.
- Fix retry exhaustion in simple ring buffer reader swap
simple_ring_buffer_swap_reader_page() starts with retry set to 8 and
post-decrements it only after a failed link replacement. On the final
attempt, a successful replacement leaves retry at zero, while a
failed replacement leaves it at -1.
But the check for success expects the retry value to be non-zero and
exits with an error on zero. This is the opposite result. Fix it.
- Fail nicely when the remote swap_reader_page() returns an error
Currently, if the swap_reader_page() of a remote buffer fails, it
triggers a WARN_ON_ONCE() and continues normally. Instead, have it
exit with an error and a pr_warn() print instead of a full WARNING.
* tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Stop remote reader update when page swap fails
tracing: Fix retry exhaustion in simple ring buffer reader swap
tracing/user_events: Clear copied tracing state before fork duplication
samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-multi-modify
samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-modify
eventfs: Initialize ei->children and ei->list in init_ei()
tracing: Fix use-after-free in trace_pipe read on sub-buffer order change
tracing: Fix crash passing ERR_PTR to kthread_stop()
tracing: Fix use-after-free with same-name named triggers
tracing: Fix logged instance name on creation failure
|
