|
The threaded IRQ handler contained multiple issues in handling interrupt
events and clearing status flags:
1. ISR bit check: The handler incorrectly checked the Interrupt Status
Register (VCNL_ISR) against VCNL_ICR_THRES_EN (BIT(1)), which is a
bitmask meant for the Control Register (VCNL_PS_ICR). In VCNL_ISR,
BIT(1) corresponds only to low-threshold interrupts. A high-threshold
interrupt (VCNL_INT_TH_HI, BIT(0)) on its own was completely ignored and
returned IRQ_NONE.
2. Event direction & channel index: The handler unconditionally pushed a
RISING event code on channel index 1. The driver only registers a single
proximity channel (index 0), and low-threshold interrupts should be
reported with IIO_EV_DIR_FALLING.
3. ISR clearing: The write-back to acknowledge the interrupt only preserved
BIT(1) instead of masking against both valid status bits.
Fix this by checking both VCNL_INT_TH_HI and VCNL_INT_TH_LOW bits in
VCNL_ISR, pushing separate IIO events with the correct direction and
channel index (0), and properly clearing handled status bits.
Fixes: 3363fbbe19e5 ("iio: proximity: vcnl3020: add periodic mode")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: Ivan Mikhaylov <fr0st61te@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.
The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.
Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.
Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
