| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO fixes from Greg KH:
"Here is a set of char/misc/iio and other small driver subsystem fixes
for 7.3-rc6 that resolve a number of reported issues. Included in here
are:
- lots of small iio driver fixes for reported problems
- interconnect driver revert to resolve a regression
- nitro_enclaves driver fix for a use-after-free
- binder driver fixes for reported problems (in both the rust and C
versions)
All of these have been in linux-next with no reported issues"
* tag 'char-misc-7.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (63 commits)
iio: adc: ad_sigma_delta: fix use-after-free on unbind
iio: accel: kxcjk-1013: reject duplicate event disable
iio: buffer: serialize buffer teardown with mode claims
iio: cdc: ad7150: fix OF matching and publish module aliases
iio: adc: ade9000: fix NULL pointer dereference in clkout registration
iio: adc: ad4030: fix invalid oversampling_ratio validation
iio: adc: ad7173: Fix digital filter configuration
iio: adc: stm32-adc: fix possible division by zero in processed channel
iio: adc: stm32-adc: fix check on internal channel availability
iio: proximity: isl29501: Fix return type of isl29501_register_write
iio: imu: inv_icm42607: restore runtime PM on system resume errors
iio: imu: inv_icm42607: propagate runtime suspend errors
iio: adc: pac1934: check ACPI label duplication
rust_binderfs: add transaction_report feature entry
rust_binder: reschedule node refcount update on thread exit
rust_binder: cancel deferred work items in thread exit
binderfs: fix UAF write in binder_add_device
binder: fix is_failure flag for superseded transaction cleanup
binder: fix leaked fd fixups on TF_UPDATE_TXN supersede
Revert "interconnect: qcom: x1e80100: enable QoS configuration"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Half of this is broken hardware (AMU counters and TLB invalidation)
and the other half is broken software (frequency scaling and signals).
So it seems as though we're all as bad as each other.
The AMU workaround is a little noisy, as it refactors an existing
workaround so that it can more easily be applied to additional CPUs.
Summary:
- Fix handling of CPU erratum #2645198 when batching pte updates
- Fix truncation of CPU frequency calculation by using 64-bit
arithmetic in arch_freq_get_on_cpu()
- Work around AMU erratum #3821522 on Cortex-A725
- Fix panic when trying to restore an SVE sigframe on a CPU that only
supports SME"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/fpsimd: signal: Forbid non-streaming SVE payload on SME-only systems
arm64: errata: Add Cortex-A725 erratum 3821522 workaround
arm64: errata: Factor out broken AMU const counter cap
arm64: topology: fix arch_freq_get_on_cpu() overflow above 4.19 GHz
arm64: mm: Fix the break-before-make flush range for erratum 2645198
|
|
Pull smb client fixes from Paulo Alcantara:
"Fix a series of data corruption and I/O error bugs found by running
generic/363 (fsx) in a loop against Windows Server 2022 and Samba.
- Stop data dirtied past EOF through an mmap from reappearing as file
content once the file is extended by a write, truncate, zero range,
copy range or clone range
- Flush dirty data and drain in-flight I/O before operations that
assume the pagecache and the server agree on the file: querying
allocated ranges, the O_TRUNC open, interior zero range, and
server-side copy/clone
- Stop a genuine size-extending zero range or preallocate from being
refused with -EOPNOTSUPP when the inode is not read caching, by
querying the server's authoritative EOF instead of trusting a stale
cached i_size
- Zero the untransferred tail of a short read, both in the netfs
read-gaps path (where stale folio content could otherwise be
written back to the server) and in the DIO/unbuffered read
collector, and tell a real EOF apart from a stale cached
remote_i_size after a lease downgrade
- Require stable pages on signed connections so a buffered write
can't modify a folio whose signature has already been computed and
is in flight, which the server rejected with STATUS_ACCESS_DENIED
and the client surfaced as -EIO
- Split several cifsFileInfo flags out of a shared bitfield byte so
concurrent updates taken under different locks no longer clobber
each other through a byte-level RMW"
* tag 'cifs-fixes-7.3-rc6' of https://git.manguebit.org/linux:
smb: client: split cifsFileInfo bitfields to avoid shared-byte RMW races
smb: client: require stable pages for signed connections
smb: client: distinguish real EOF from a stale remote_i_size on read
netfs: zero the tail of a short DIO/unbuffered read
smb: client: only require read lease for size-extending preallocate
netfs: zero gaps in read-gaps folio to avoid writing back stale data
smb: client: only require read lease for size-extending zero range
smb: client: drain and invalidate before server-side copy/clone
smb: client: flush dirty data before zeroing a range
smb: client: drain outstanding I/O before truncating on O_TRUNC open
smb: client: flush and commit data before querying allocated ranges
smb: client: discard post-EOF pagecache when extending a file via clone range
smb: client: discard post-EOF pagecache when extending a file via copy range
smb: client: discard post-EOF pagecache when extending a file via zero range
smb: client: clear post-EOF pagecache when extending a file via truncate
netfs: clear post-EOF pagecache when extending a file via write
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix a task_work add use-after-free with SQPOLL.
The sqpoll thread could pop and complete the last request while
io_req_normal_work_add() was still looking at them after the mpscq
push.
Use the same approach as DEFER_TASKRUN to protect from that, holding
an RCU read lock across the add, and have exit wait for an RCU grace
period for SQPOLL rings as well.
- CQE32 ring fixes: correct the free entry check for 32b CQEs, zero the
big_cqe for aux CQEs, and only post the dummy skip CQE on CQE_MIXED
rings
- Mark the source filter table as COW when cloning bpf filters, so
registering another filter on the source doesn't modify the shared
table in place
- Initialize the task context before running the BPF loop
- Requeue zcrx multishot receives stopped by a local resource
- End a TX_TIMESTAMP multishot cmd when the CQ is full (lollipopkit)
* tag 'io_uring-7.3-20261002' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix task_work add use-after-free with SQPOLL
io_uring/cmd_net: end TX_TIMESTAMP multishot when the CQ is full
io_uring/zcrx: requeue multishot receives stopped by a local resource
io_uring: initialize task context before running the BPF loop
io_uring: zero big_cqe for aux CQEs on CQE32 rings
io_uring: fix free entry check for 32b CQEs on CQE32 rings
io_uring: only post the dummy skip CQE on CQE_MIXED rings
io_uring/bpf_filter: mark source as COW when cloning filters
|
|
Cortex-A725 erratum 3821522 affects the CNT_CYCLES event, which can
incur a significant increment error when a CPU enters and subsequently
exits WFE or WFI, and may no longer track the system counter
frequency.
The AMEVCNTR01_EL0 counter is used as the AMU constant counter for
frequency invariance and CPPC FFH feedback counters. Wire the affected
Cortex-A725 range into the shared broken AMU constant-counter capability
so the affected counter is treated as unavailable by returning zero in
the AMU counter paths. This prevents the broken counter from being used
as a reference source.
The erratum can also affect PMUv3 users of the CNT_CYCLES event,
but this workaround intentionally does not change PMU event handling.
Hiding or rejecting the PMU event from the erratum code would change
the perf-visible PMU event interface, including raw event selection,
and would need a separate PMU-specific approach rather than being
folded into the AMU reference-counter workaround.
Cc: stable@vger.kernel.org
Signed-off-by: Beata Michalska <beata.michalska@arm.com>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The buffered read collector zero-fills the tail of a short read that
stops below the inode's i_size (netfs_clear_unread()), so a read that
races an extending write still returns the expected number of bytes.
The non-buffered collector path does no such thing: it just records
how much was transferred.
Add the same zero-fill for the non-buffered case, gated on
NETFS_SREQ_CLEAR_TAIL: a subreq's source sets that flag when a short
result from it is known to be safe to treat as a hole, as opposed to
NETFS_SREQ_HIT_EOF, which means the read genuinely ran off the end of
the file and should be reported short as-is. Only CLEAR_TAIL should
zero-fill here; a real EOF must stay a real short read.
No source currently sets CLEAR_TAIL on an unbuffered/DIO subrequest,
so this is inert on its own -- a following change teaches cifs to set
it in the one case that needs it.
Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item")
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Shyam Prasad N <sprasad@microsoft.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Bharath SM <bharathsm@microsoft.com>
Cc: stable@vger.kernel.org
|
|
__init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2.
PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in
HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host
traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The
kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU
driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a
write from EL0 reaches the trap and takes the host down without a panic
message.
Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already
does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9
bits.
Fixes: 858c7bfcb35e1 ("arm64/boot: Enable EL2 requirements for FEAT_PMUv3p9")
Cc: stable@vger.kernel.org
Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for the 7.3 cycle.
A couple of core fixes, the rest usual mix of driver issues that surfaced
from merge window until now.
core
- buffer: Ensure that when using the iio_push_to_buffers_with_ts_unaligned()
that the full buffer is zeroed.
- trigger: Cancel reenable_work() before freeing the trigger that might be
re-enabled.
dma-buffer
- Fix wrong sizing for a mapped sg_list. If an IOMMU was using a fused
entry the mapping might walk off the end.
adi,ade9000
- Wait for power up before requesting interrupts.
- Fix overlap in scan index for current and voltage channels.
- Ensure Phase C dip event included in IRQ1 handler.
adi,adf4377
- Initialize all of a clk_init_data.
adi,adis*
- Ensure debugfs reads are finished before unbind.
adi,axi-adc
- Initialize mutex.
adi,admv1013
- Ensure mutex is intialized before notifier that might use it is
registered.
- Fix wrong channel field used for read_raw.
allwinner,sun4i
- Drop a pm_runtime_put() when there was no get.
- Ensure correct cleanup on driver probe fail due to any issues with
the thermal zone.
aspeed,adc,
- Don't eat reset deassert errors.
awinic,aw96103
- Make sure firmware length is validated rather than blindly trusting
it.
bosch,bmp280
- Fix out of bounds lookup of sampling frequency due to indexing based on
elements in matrix rather than just the correct dimension.
invensense,timestamp library
- Ensure time estimate doesn't invert wrt to current time in a corner
case occasionally seen.
kionix,kx022a
- Off by one in array boundary check.
- Close a memory leak and state corruption in error path.
maxim,max1363
- Sign extend bipolar values to ensure correct reporting to userspace.
maxim,max30102
- Fix NULL dereference by checking there is data in the FIFO before
trying to do anything with it.
microchip,mcp47a1
- Ensure highest possible value actually settable.
pulsed-light,lidar-lite
- Don't leak the IIO device registration if runtime pm setup fails
particularly as it was being freed.
rockchip,saradc
- Fix wrong fallback compatible for rv1106 that lead to trying
to use too many channels (correct support will follow next
merge window)
rohm,bd79124
- Correct limit used for rising alarms.
- Fix which registers related to limits are used in initialization.
- Apply GPIO mask to allow subset of GPIOs to be toggled.
- Add missing regmap error handling in a few places.
- Ensures scale is read only.
rohm,bm1390
- Don't silently eat a data read error.
rohm,bu27034
- Don't silently eat error when reading gain.
- Ensure we infinite delay doesn't happen on error.
semtech,sx9324
- Fix wrong proximity channel resolution.
sharp,gp2ap020a00f
- Make sure to drain irq_work in remove path.
st,vl5310x
- Ensure direct mode is claimed for read_raw avoiding corruption
of buffered accesses.
vishay,vcnl3020
- Use write bits for ISR mask and ensure right event reported.
vti,sca3000
- Fix up a condition check for the frequency divider.
xilinx,xadc
- Swap registration of cleanup of work with that of irq
to ensure that no irqs can cause work that has been freed
to be queued.
x-powers,axp288
- Add bias override quirk for Haier HV103H. Fix because we
used to always override then moved to trusting the firmware
setup - which fixed some boards, but broke others.
* tag 'iio-fixes-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (42 commits)
iio: proximity: vcnl3020: fix ISR bitmask check in IRQ handler
iio: proximity: vl53l0x-i2c: claim direct mode for raw reads
iio: dac: mcp47a1: Allow full-scale output
iio: accel: kionix-kx022a: Prevent memory leak and fix state
iio: light: rohm-bu27034: Fix infinite delay on error
iio: adc: sun4i-gpadc-iio: clean up on thermal zone registration failure
iio: adc: sun4i-gpadc-iio: drop underflowing pm_runtime_put() calls
iio: adc: axp288: Add TS bias override for Haier HV103H
dt-bindings: iio: adc: rockchip-saradc: Fix RV1106 compatible
dt-bindings: iio: adc: rockchip-saradc: Group single-entries into an enum list
iio: inv_sensors: fix estimated value larger than interrupt timestamp
iio: adc: aspeed: propagate reset deassert errors
iio: buffer-dmaengine: fix sg entry iteration when building dma_vecs
iio: proximity: pulsedlight: fix iio_device left registered on PM setup failure
iio: trigger: cancel reenable_work before freeing trigger
iio: frequency: admv1013: fix wrong channel field used in admv1013_read_raw()
iio: accel: sca3000: fix frequency divider condition check
iio: admv1013: initialize callback mutex before registering notifier
iio: gyro: adis16136: fix unprotected debugfs reads
iio: imu: adis16400: fix unprotected debugfs reads
...
|
|
vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.
The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.
Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.
Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull IRQ subsystem fixes from Ingo Molnar:
- Revert a commit to the mbigen irqchip driver that caused
a regression on two-port Hi1616 chips (Caina)
- Fix a too-long-preemption-off bug in the stm32mp-exti
irqchip driver, caused by a time unit ambiguity & mismatch
(Ju Nan)
- Remove the now completely unused irq_domain_add_linear()
inline function (Jiri Slaby)
* tag 'irq-urgent-2026-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/stm32mp-exti: Fix the unit of the hwspinlock timeout
Revert "irqchip/mbigen: Fix mbigen node address layout"
irqdomain: Delete irq_domain_add_linear()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Fix kernfs listxattr() not returning security xattr names (e.g.
SELinux labels) when the kernfs node has no allocated kernfs_iattrs
- Fix silent truncation of IRQ vector indices in the Rust PCI
abstractions
- Don't select OF from DRIVER_PE_KUNIT_TEST; skip the test when OF is
disabled instead of silently enabling extra kernel functionality
- Russ Weight is retiring from kernel development; update the Firmware
Loader sysfs contact to the driver-core mailing list, add a CREDITS
entry for Firmware Upload, and update MAINTAINERS accordingly
* tag 'driver-core-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
MAINTAINERS: Remove Russ Weight from Firmware Loader
CREDITS: Add CREDITS entry for Firmware Upload
firmware_loader: Change contact for sysfs nodes
rust: pci: reject IRQ vector indices that do not fit in u32
kernfs: preserve security xattrs without allocating iattrs
drivers: base: test: DRIVER_PE_KUNIT_TEST should not select OF
|
|
7.3-rc1 is free of calls to irq_domain_add_linear(), so it can be finally
deleted.
According to Dongliang Mu, the related paragraph in the Chinese docs is now
obsolete. So drop it completely.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Link: https://patch.msgid.link/20260901070450.255507-1-jirislaby@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull Coccinelle updates from Julia Lawall:
- Clean up a number of the semantic patches in the scripts/coccinelle
directory, particularly with respect to functions that no longer
exist in the kernel (Sang-Heon Jeon)
He and I have also done some reorganizations that improve
performance.
- Eliminate some false positives (me)
- Fix an out of date URL (相浦彰)
* tag 'cocci-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
coccinelle: ifnulldev_put: update error message
coccinelle: ifnulldev_put: update outdated helper names
coccinelle: atomic_as_refcounter: drop atomic_long_dec_and_lock
coccinelle: kfree_mismatch: drop vmalloc_exec
coccinelle: pool_zalloc-simple: drop the pci_pool_alloc rules
coccinelle: zalloc-simple: drop the kmem_alloc rules
coccinelle: alloc_cast: drop removed allocators
coccinelle: remove obsolete pci_free_consistent.cocci
scripts: coccinelle: devm_free: reduce false positives
coccinelle: misc: struct_size: drop unneeded parentheses
coccinelle: mini_lock: improve performance when searching loops
coccinelle: api: check for macro context
coccinelle: update Coccinelle website URL
coccinelle: misc: minmax: avoid unhelpful isomorphisms
coccinelle: misc: minmax: check for the presence of if cases
coccinelle: misc: minmax: drop unneeded parentheses
coccinelle: misc: minmax: improve performance when no candidate exists
coccinelle: double_lock: improve performance when no double lock exists
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix error output of boot instance creation failure
Currently if a boot instance creation fails, instead of printing out
the name of the instance that failed, it prints "(null)". That is
because it prints "cur_str" that had already been processed by
strsep(). Print the saved name instead.
While at it, print the error code of the failure.
- Fix use-after-free for same named historgrams
Histograms can be named so that they can be used in multiple events.
But if the named histogram has a variable attached, the second event
that uses the named histogram which duplicates it and needs to free
the original after duplication leaves the old variable in place and
still visible. If another histogram uses than variable, it will use
the stale one which will try to reference the freed duplicate
histogram and crash the kernel.
Free the duplicate variables along with the duplicated histogram
data.
- Check return value of kthread_run() in event self test
The events self tests uses a kthread for testing but does not check
if it succeeded in creating a kthread. If the kthread creation were
to fail, the code will still try to call kthread_stop() on the error
returned.
- Fix race between reading trace_pipe and updating subbuffer size
If a user is reading the trace_pipe file at the same time they update
the ring buffer sub-buffer size, can cause the trace_pipe read to
read stale data. Add trace_access_lock() around updating the ring
buffer sub-buffer size.
- Fix eventfs_inode on failure path in creation of the events directory
In the creation of the "events" directory, if after allocating the
eventfs_inode a failure is detected, it calls cleanup_ei() which
calls free_ei(). The free_ei() will test if eventfs_inode being freed
has no children. It is a bug if it does. But on the failure case of
the creation of the "events" directory, the children lists have not
yet been initialized and the free will trigger a warning because
list_empty() on an uninitialized list returns false.
Move the initialization into init_ei() where it makes more sense and
makes sure that a created eventfs_inode has its lists initialized
upon creation.
- Check return value of kthread_run() in ftrace direct sample code
The sample code that shows how to use the ftrace direct calls does
not test the return of kthread_run() to see if it succeeds. Return a
failure if the kthread_run() doesn't succeed.
- Clear user events state on fork in case of alloc failure
On fork, the child gets a pointer to the parent's user events state.
It makes a copy of it then updates the child's pointer to it. But if
the allocation fails, the duplication function leaves the child with
a pointer to its parent's descriptor. When the child cleans up its
data, it will free the parent's descriptor while the parent is still
using it.
In the duplication function, set the child's user_event_mm to NULL
before testing if the allocation succeeded, and when it exits it will
not free the parent's descriptor.
- Fix retry exhaustion in simple ring buffer reader swap
simple_ring_buffer_swap_reader_page() starts with retry set to 8 and
post-decrements it only after a failed link replacement. On the final
attempt, a successful replacement leaves retry at zero, while a
failed replacement leaves it at -1.
But the check for success expects the retry value to be non-zero and
exits with an error on zero. This is the opposite result. Fix it.
- Fail nicely when the remote swap_reader_page() returns an error
Currently, if the swap_reader_page() of a remote buffer fails, it
triggers a WARN_ON_ONCE() and continues normally. Instead, have it
exit with an error and a pr_warn() print instead of a full WARNING.
* tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Stop remote reader update when page swap fails
tracing: Fix retry exhaustion in simple ring buffer reader swap
tracing/user_events: Clear copied tracing state before fork duplication
samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-multi-modify
samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-modify
eventfs: Initialize ei->children and ei->list in init_ei()
tracing: Fix use-after-free in trace_pipe read on sub-buffer order change
tracing: Fix crash passing ERR_PTR to kthread_stop()
tracing: Fix use-after-free with same-name named triggers
tracing: Fix logged instance name on creation failure
|
|
- pci_alloc_consistent() and pci_zalloc_consistent() were removed by
commit 7968778914e5
("PCI: Remove the deprecated "pci-dma-compat.h" API")
- kmem_alloc() was removed by commit f078d4ea8276
("xfs: convert kmem_alloc() to kmalloc()")
- kmem_zalloc() was removed by commit 10634530f7ba
("xfs: convert kmem_zalloc() to kzalloc()")
- kmem_zone_alloc() and kmem_zone_zalloc() were removed by commit
bae633a4a283 ("xfs: remove xfs_zone_{alloc,zalloc} helpers")
So drop them from the rules.
No functional change.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
