diff options
Diffstat (limited to 'fs/smb/client/smberr.h')
| -rw-r--r-- | fs/smb/client/smberr.h | 298 |
1 files changed, 298 insertions, 0 deletions
diff --git a/fs/smb/client/smberr.h b/fs/smb/client/smberr.h new file mode 100644 index 000000000..5c3415bf1 --- /dev/null +++ b/fs/smb/client/smberr.h @@ -0,0 +1,298 @@ +/* SPDX-License-Identifier: LGPL-2.1 */ +/* + * + * Copyright (c) International Business Machines Corp., 2002,2004 + * Author(s): Steve French (sfrench@us.ibm.com) + * + * See Error Codes section of the SNIA CIFS Specification + * for more information + * + */ + +struct smb_to_posix_error { + __u16 smb_err; + int posix_code; +}; + +/* The request was successful. */ +#define SUCCESS 0x00 +/* Error is from the core DOS operating system set */ +#define ERRDOS 0x01 +/* Error is generated by the file server daemon */ +#define ERRSRV 0x02 +/* Error is a hardware error. */ +#define ERRHRD 0x03 +/* Command was not in the "SMB" format. */ +#define ERRCMD 0xFF + +/* The following error codes may be generated with the SUCCESS error class.*/ + +/*#define SUCCESS 0 The request was successful. */ + +/* + * The following error codes may be generated with the ERRDOS error class. + * The comment at the end of each definition indicates the POSIX error + * code; it is used to generate the `mapping_table_ERRDOS` array. + */ + +/* + * Invalid function. The server did not + * recognize or could not perform a + * system call generated by the server, + * e.g., set the DIRECTORY attribute on + * a data file, invalid seek mode. + */ +#define ERRbadfunc 1 // -EINVAL +/* + * File not found. The last component + * of a file's pathname could not be + * found. + */ +#define ERRbadfile 2 // -ENOENT +/* + * Directory invalid. A directory + * component in a pathname could not be + * found. + */ +#define ERRbadpath 3 // -ENOTDIR +/* + * Too many open files. The server has + * no file handles available. + */ +#define ERRnofids 4 // -EMFILE +/* + * Access denied, the client's context + * does not permit the requested + * function. This includes the + * following conditions: invalid rename + * command, write to Fid open for read + * only, read on Fid open for write + * only, attempt to delete a non-empty + * directory + */ +#define ERRnoaccess 5 // -EACCES +/* + * Invalid file handle. The file handle + * specified was not recognized by the + * server. + */ +#define ERRbadfid 6 // -EBADF +/* Memory control blocks destroyed. */ +#define ERRbadmcb 7 // -EIO +/* + * Insufficient server memory to + * perform the requested function. + */ +#define ERRnomem 8 // -EREMOTEIO +/* Invalid memory block address. */ +#define ERRbadmem 9 // -EFAULT +/* Invalid environment. */ +#define ERRbadenv 10 // -EFAULT +/* Invalid format. */ +#define ERRbadformat 11 // -EINVAL +/* Invalid open mode. */ +#define ERRbadaccess 12 // -EACCES +/* + * Invalid data (generated only by + * IOCTL calls within the server). + */ +#define ERRbaddata 13 // -EIO +/* Invalid drive specified. */ +#define ERRbaddrive 15 // -ENXIO +/* + * A Delete Directory request attempted + * to remove the server's current + * directory. + */ +#define ERRremcd 16 // -EACCES +/* + * Not same device (e.g., a cross + * volume rename was attempted + */ +#define ERRdiffdevice 17 // -EXDEV +/* + * A File Search command can find no + * more files matching the specified + * criteria. + */ +#define ERRnofiles 18 // -ENOENT +/* media is write protected */ +#define ERRwriteprot 19 // -EROFS +#define ERRgeneral 31 +/* + * The sharing mode specified for an + * Open conflicts with existing FIDs on + * the file. + */ +#define ERRbadshare 32 // -EBUSY +/* + * A Lock request conflicted with an + * existing lock or specified an + * invalid mode, or an Unlock requested + * attempted to remove a lock held by + * another process. + */ +#define ERRlock 33 // -EACCES +#define ERRunsup 50 // -EINVAL +#define ERRnosuchshare 67 // -ENXIO +/* + * The file named in the request + * already exists. + */ +#define ERRfilexists 80 // -EEXIST +#define ERRinvparm 87 // -EINVAL +#define ERRdiskfull 112 // -ENOSPC +#define ERRinvname 123 // -ENOENT +#define ERRunknownlevel 124 // -EOPNOTSUPP +#define ERRdirnotempty 145 // -ENOTEMPTY +#define ERRnotlocked 158 // -ENOLCK +#define ERRcancelviolation 173 // -ENOLCK +#define ERRalreadyexists 183 // -EEXIST +#define ERRbadpipe 230 +#define ERRpipebusy 231 +#define ERRpipeclosing 232 +#define ERRnotconnected 233 +#define ERRmoredata 234 // -EOVERFLOW +#define ERReasnotsupported 282 // -EOPNOTSUPP +/* + * The operation would cause a quota + * limit to be exceeded. + */ +#define ErrQuota 0x200 // -EDQUOT +/* + * A link operation was performed on a + * pathname that was not a link. + */ +#define ErrNotALink 0x201 // -ENOLINK +#define ERRnetlogonNotStarted 2455 // -ENOPROTOOPT + +/* Below errors are used internally (do not come over the wire) for passthrough + from STATUS codes to POSIX only */ +#define ERRsymlink 0xFFFD // -EOPNOTSUPP +#define ErrTooManyLinks 0xFFFE // -EMLINK + +/* + * The following error codes may be generated with the ERRSRV error class. + * The comment at the end of each definition indicates the POSIX error + * code; it is used to generate the `mapping_table_ERRSRV` array. + */ + +/* + * Non-specific error code. It is + * returned under the following + * conditions: resource other than disk + * space exhausted (e.g. TIDs), first + * SMB command was not negotiate, + * multiple negotiates attempted, and + * internal server error. + */ +#define ERRerror 1 // -EIO +/* + * Bad password - name/password pair in + * a TreeConnect or Session Setup are + * invalid. + */ +#define ERRbadpw 2 // -EACCES +/* + * used for indicating DFS referral + * needed + */ +#define ERRbadtype 3 // -EREMOTE +/* + * The client does not have the + * necessary access rights within the + * specified context for requested + * function. + */ +#define ERRaccess 4 // -EACCES +/* + * The Tid specified in a command was + * invalid. + */ +#define ERRinvtid 5 // -ENXIO +/* + * Invalid network name in tree + * connect. + */ +#define ERRinvnetname 6 // -ENXIO +/* + * Invalid device - printer request + * made to non-printer connection or + * non-printer request made to printer + * connection. + */ +#define ERRinvdevice 7 // -ENXIO +/* + * Print queue full (files) -- returned + * by open print file. + */ +#define ERRqfull 49 // -ENOSPC +/* Print queue full -- no space. */ +#define ERRqtoobig 50 // -ENOSPC +/* EOF on print queue dump */ +#define ERRqeof 51 // -EIO +/* Invalid print file FID. */ +#define ERRinvpfid 52 // -EBADF +/* + * The server did not recognize the + * command received. + */ +#define ERRsmbcmd 64 // -EBADRQC +/* + * The server encountered an internal + * error, e.g., system file + * unavailable. + */ +#define ERRsrverror 65 // -EIO +/* (obsolete) */ +#define ERRbadBID 66 // -EIO +/* + * The Fid and pathname parameters + * contained an invalid combination of + * values. + */ +#define ERRfilespecs 67 // -EINVAL +/* (obsolete) */ +#define ERRbadLink 68 // -EIO +/* + * The access permissions specified for + * a file or directory are not a valid + * combination. + */ +#define ERRbadpermits 69 // -EINVAL +#define ERRbadPID 70 // -ESRCH +/* attribute (mode) is invalid */ +#define ERRsetattrmode 71 // -EINVAL +/* Server is paused */ +#define ERRpaused 81 // -EHOSTDOWN +/* reserved - messaging off */ +#define ERRmsgoff 82 // -EHOSTDOWN +/* reserved - no room for message */ +#define ERRnoroom 83 // -ENOSPC +/* reserved - too many remote names */ +#define ERRrmuns 87 // -EUSERS +/* operation timed out */ +#define ERRtimeout 88 // -ETIME +/* No resources available for request */ +#define ERRnoresource 89 // -EREMOTEIO +/* Too many UIDs active on this session */ +#define ERRtoomanyuids 90 // -EUSERS +/* The UID is not known as a valid user */ +#define ERRbaduid 91 // -EACCES +/* temporarily unable to use raw */ +#define ERRusempx 250 // -EIO +/* + * temporarily unable to use either raw + * or mpx + */ +#define ERRusestd 251 // -EIO +#define ERR_NOTIFY_ENUM_DIR 1024 // -ENOBUFS +/* user account does not exist */ +#define ERRnoSuchUser 2238 // -EACCES +#define ERRaccountexpired 2239 // -EKEYEXPIRED +/* can not logon from this client */ +#define ERRbadclient 2240 // -EACCES +/* logon hours do not allow this */ +#define ERRbadLogonTime 2241 // -EACCES +#define ERRpasswordExpired 2242 // -EKEYEXPIRED +#define ERRnosupport 0xFFFF // -EINVAL |