diff options
Diffstat (limited to 'drivers/input/touchscreen/usbtouchscreen.c')
| -rw-r--r-- | drivers/input/touchscreen/usbtouchscreen.c | 1800 |
1 files changed, 1800 insertions, 0 deletions
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c new file mode 100644 index 000000000..0bbacb517 --- /dev/null +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -0,0 +1,1800 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/****************************************************************************** + * usbtouchscreen.c + * Driver for USB Touchscreens, supporting those devices: + * - eGalax Touchkit + * includes eTurboTouch CT-410/510/700 + * - 3M/Microtouch EX II series + * - ITM + * - PanJit TouchSet + * - eTurboTouch + * - Gunze AHL61 + * - DMC TSC-10/25 + * - IRTOUCHSYSTEMS/UNITOP + * - IdealTEK URTC1000 + * - General Touch + * - GoTop Super_Q2/GogoPen/PenPower tablets + * - JASTEC USB touch controller/DigiTech DTR-02U + * - Zytronic capacitive touchscreen + * - NEXIO/iNexio + * - Elo TouchSystems 2700 IntelliTouch + * - EasyTouch USB Dual/Multi touch controller from Data Modul + * + * Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch> + * Copyright (C) by Todd E. Johnson (mtouchusb.c) + * + * Driver is based on touchkitusb.c + * - ITM parts are from itmtouch.c + * - 3M parts are from mtouchusb.c + * - PanJit parts are from an unmerged driver by Lanslott Gish + * - DMC TSC 10/25 are from Holger Schurig, with ideas from an unmerged + * driver from Marius Vollmer + * + *****************************************************************************/ + +//#define DEBUG + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/input.h> +#include <linux/hid.h> +#include <linux/mutex.h> + +static bool swap_xy; +module_param(swap_xy, bool, 0644); +MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped."); + +static bool hwcalib_xy; +module_param(hwcalib_xy, bool, 0644); +MODULE_PARM_DESC(hwcalib_xy, "If set hw-calibrated X/Y are used if available"); + +/* device specifc data/functions */ +struct usbtouch_usb; +struct usbtouch_device_info { + int min_xc, max_xc; + int min_yc, max_yc; + int min_press, max_press; + int rept_size; + + /* + * Always service the USB devices irq not just when the input device is + * open. This is useful when devices have a watchdog which prevents us + * from periodically polling the device. Leave this unset unless your + * touchscreen device requires it, as it does consume more of the USB + * bandwidth. + */ + bool irq_always; + + /* + * used to get the packet len. possible return values: + * > 0: packet len + * = 0: skip one byte + * < 0: -return value more bytes needed + */ + int (*get_pkt_len) (unsigned char *pkt, int len); + + int (*read_data) (struct usbtouch_usb *usbtouch, unsigned char *pkt); + int (*alloc) (struct usbtouch_usb *usbtouch); + int (*init) (struct usbtouch_usb *usbtouch); + void (*exit) (struct usbtouch_usb *usbtouch); +}; + +/* a usbtouch device */ +struct usbtouch_usb { + unsigned char *data; + dma_addr_t data_dma; + int data_size; + unsigned char *buffer; + int buf_len; + struct urb *irq; + struct usb_interface *interface; + struct input_dev *input; + const struct usbtouch_device_info *type; + struct mutex pm_mutex; /* serialize access to open/suspend */ + bool is_open; + char name[128]; + char phys[64]; + void *priv; + + int x, y; + int touch, press; + + void (*process_pkt)(struct usbtouch_usb *usbtouch, unsigned char *pkt, int len); +}; + + +/***************************************************************************** + * e2i Part + */ + +#ifdef CONFIG_TOUCHSCREEN_USB_E2I +static int e2i_init(struct usbtouch_usb *usbtouch) +{ + int ret; + struct usb_device *udev = interface_to_usbdev(usbtouch->interface); + + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x01, 0x02, 0x0000, 0x0081, + NULL, 0, USB_CTRL_SET_TIMEOUT); + + dev_dbg(&usbtouch->interface->dev, + "%s - usb_control_msg - E2I_RESET - bytes|err: %d\n", + __func__, ret); + return ret; +} + +static int e2i_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + int tmp = (pkt[0] << 8) | pkt[1]; + dev->x = (pkt[2] << 8) | pkt[3]; + dev->y = (pkt[4] << 8) | pkt[5]; + + tmp = tmp - 0xA000; + dev->touch = (tmp > 0); + dev->press = (tmp > 0 ? tmp : 0); + + return 1; +} + +static const struct usbtouch_device_info e2i_dev_info = { + .min_xc = 0x0, + .max_xc = 0x7fff, + .min_yc = 0x0, + .max_yc = 0x7fff, + .rept_size = 6, + .init = e2i_init, + .read_data = e2i_read_data, +}; +#endif + + +/***************************************************************************** + * eGalax part + */ + +#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX + +#ifndef MULTI_PACKET +#define MULTI_PACKET +#endif + +#define EGALAX_PKT_TYPE_MASK 0xFE +#define EGALAX_PKT_TYPE_REPT 0x80 +#define EGALAX_PKT_TYPE_DIAG 0x0A + +static int egalax_init(struct usbtouch_usb *usbtouch) +{ + struct usb_device *udev = interface_to_usbdev(usbtouch->interface); + int ret, i; + + /* + * An eGalax diagnostic packet kicks the device into using the right + * protocol. We send a "check active" packet. The response will be + * read later and ignored. + */ + + u8 *buf __free(kfree) = kmalloc(3, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + buf[0] = EGALAX_PKT_TYPE_DIAG; + buf[1] = 1; /* length */ + buf[2] = 'A'; /* command - check active */ + + for (i = 0; i < 3; i++) { + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, 0, buf, 3, + USB_CTRL_SET_TIMEOUT); + if (ret != -EPIPE) + break; + } + + return ret < 0 ? ret : 0; +} + +static int egalax_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT) + return 0; + + dev->x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F); + dev->y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F); + dev->touch = pkt[0] & 0x01; + + return 1; +} + +static int egalax_get_pkt_len(unsigned char *buf, int len) +{ + switch (buf[0] & EGALAX_PKT_TYPE_MASK) { + case EGALAX_PKT_TYPE_REPT: + return 5; + + case EGALAX_PKT_TYPE_DIAG: + if (len < 2) + return -1; + + return buf[1] + 2; + } + + return 0; +} + +static const struct usbtouch_device_info egalax_dev_info = { + .min_xc = 0x0, + .max_xc = 0x07ff, + .min_yc = 0x0, + .max_yc = 0x07ff, + .rept_size = 16, + .get_pkt_len = egalax_get_pkt_len, + .read_data = egalax_read_data, + .init = egalax_init, +}; +#endif + +/***************************************************************************** + * EasyTouch part + */ + +#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH + +#ifndef MULTI_PACKET +#define MULTI_PACKET +#endif + +#define ETOUCH_PKT_TYPE_MASK 0xFE +#define ETOUCH_PKT_TYPE_REPT 0x80 +#define ETOUCH_PKT_TYPE_REPT2 0xB0 +#define ETOUCH_PKT_TYPE_DIAG 0x0A + +static int etouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + if ((pkt[0] & ETOUCH_PKT_TYPE_MASK) != ETOUCH_PKT_TYPE_REPT && + (pkt[0] & ETOUCH_PKT_TYPE_MASK) != ETOUCH_PKT_TYPE_REPT2) + return 0; + + dev->x = ((pkt[1] & 0x1F) << 7) | (pkt[2] & 0x7F); + dev->y = ((pkt[3] & 0x1F) << 7) | (pkt[4] & 0x7F); + dev->touch = pkt[0] & 0x01; + + return 1; +} + +static int etouch_get_pkt_len(unsigned char *buf, int len) +{ + switch (buf[0] & ETOUCH_PKT_TYPE_MASK) { + case ETOUCH_PKT_TYPE_REPT: + case ETOUCH_PKT_TYPE_REPT2: + return 5; + + case ETOUCH_PKT_TYPE_DIAG: + if (len < 2) + return -1; + + return buf[1] + 2; + } + + return 0; +} + +static const struct usbtouch_device_info etouch_dev_info = { + .min_xc = 0x0, + .max_xc = 0x07ff, + .min_yc = 0x0, + .max_yc = 0x07ff, + .rept_size = 16, + .get_pkt_len = etouch_get_pkt_len, + .read_data = etouch_read_data, +}; +#endif + +/***************************************************************************** + * PanJit Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT +static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1]; + dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3]; + dev->touch = pkt[0] & 0x01; + + return 1; +} + +static const struct usbtouch_device_info panjit_dev_info = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 8, + .read_data = panjit_read_data, +}; +#endif + + +/***************************************************************************** + * 3M/Microtouch Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_3M + +#define MTOUCHUSB_ASYNC_REPORT 1 +#define MTOUCHUSB_RESET 7 +#define MTOUCHUSB_REQ_CTRLLR_ID 10 + +#define MTOUCHUSB_REQ_CTRLLR_ID_LEN 16 + +static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + if (hwcalib_xy) { + dev->x = (pkt[4] << 8) | pkt[3]; + dev->y = 0xffff - ((pkt[6] << 8) | pkt[5]); + } else { + dev->x = (pkt[8] << 8) | pkt[7]; + dev->y = (pkt[10] << 8) | pkt[9]; + } + dev->touch = (pkt[2] & 0x40) ? 1 : 0; + + return 1; +} + +struct mtouch_priv { + u8 fw_rev_major; + u8 fw_rev_minor; +}; + +static int mtouch_get_fw_revision(struct usbtouch_usb *usbtouch) +{ + struct usb_device *udev = interface_to_usbdev(usbtouch->interface); + struct mtouch_priv *priv = usbtouch->priv; + int ret; + + u8 *buf __free(kfree) = kzalloc(MTOUCHUSB_REQ_CTRLLR_ID_LEN, GFP_NOIO); + if (!buf) + return -ENOMEM; + + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + MTOUCHUSB_REQ_CTRLLR_ID, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, 0, buf, MTOUCHUSB_REQ_CTRLLR_ID_LEN, + USB_CTRL_SET_TIMEOUT); + if (ret != MTOUCHUSB_REQ_CTRLLR_ID_LEN) { + dev_warn(&usbtouch->interface->dev, + "Failed to read FW rev: %d\n", ret); + return ret < 0 ? ret : -EIO; + } + + priv->fw_rev_major = buf[3]; + priv->fw_rev_minor = buf[4]; + + return 0; +} + +static int mtouch_alloc(struct usbtouch_usb *usbtouch) +{ + struct mtouch_priv *priv; + + priv = kmalloc_obj(*priv); + if (!priv) + return -ENOMEM; + + usbtouch->priv = priv; + return 0; +} + +static int mtouch_init(struct usbtouch_usb *usbtouch) +{ + int ret, i; + struct usb_device *udev = interface_to_usbdev(usbtouch->interface); + + ret = mtouch_get_fw_revision(usbtouch); + if (ret) + return ret; + + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + MTOUCHUSB_RESET, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); + dev_dbg(&usbtouch->interface->dev, + "%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d\n", + __func__, ret); + if (ret < 0) + return ret; + msleep(150); + + for (i = 0; i < 3; i++) { + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + MTOUCHUSB_ASYNC_REPORT, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT); + dev_dbg(&usbtouch->interface->dev, + "%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d\n", + __func__, ret); + if (ret >= 0) + break; + if (ret != -EPIPE) + return ret; + } + + /* Default min/max xy are the raw values, override if using hw-calib */ + if (hwcalib_xy) { + input_set_abs_params(usbtouch->input, ABS_X, 0, 0xffff, 0, 0); + input_set_abs_params(usbtouch->input, ABS_Y, 0, 0xffff, 0, 0); + } + + return 0; +} + +static void mtouch_exit(struct usbtouch_usb *usbtouch) +{ + struct mtouch_priv *priv = usbtouch->priv; + + kfree(priv); +} + +static struct usbtouch_device_info mtouch_dev_info = { + .min_xc = 0x0, + .max_xc = 0x4000, + .min_yc = 0x0, + .max_yc = 0x4000, + .rept_size = 11, + .read_data = mtouch_read_data, + .alloc = mtouch_alloc, + .init = mtouch_init, + .exit = mtouch_exit, +}; + +static ssize_t mtouch_firmware_rev_show(struct device *dev, + struct device_attribute *attr, char *output) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); + struct mtouch_priv *priv = usbtouch->priv; + + return sysfs_emit(output, "%1x.%1x\n", + priv->fw_rev_major, priv->fw_rev_minor); +} +static DEVICE_ATTR(firmware_rev, 0444, mtouch_firmware_rev_show, NULL); + +static struct attribute *mtouch_attrs[] = { + &dev_attr_firmware_rev.attr, + NULL +}; + +static bool mtouch_group_visible(struct kobject *kobj) +{ + struct device *dev = kobj_to_dev(kobj); + struct usb_interface *intf = to_usb_interface(dev); + struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); + + return usbtouch->type == &mtouch_dev_info; +} + +DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(mtouch); + +static const struct attribute_group mtouch_attr_group = { + .is_visible = SYSFS_GROUP_VISIBLE(mtouch), + .attrs = mtouch_attrs, +}; +#endif + + +/***************************************************************************** + * ITM Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_ITM +static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + int touch; + /* + * ITM devices report invalid x/y data if not touched. + * if the screen was touched before but is not touched any more + * report touch as 0 with the last valid x/y data once. then stop + * reporting data until touched again. + */ + dev->press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F); + + touch = ~pkt[7] & 0x20; + if (!touch) { + if (dev->touch) { + dev->touch = 0; + return 1; + } + + return 0; + } + + dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F); + dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F); + dev->touch = touch; + + return 1; +} + +static const struct usbtouch_device_info itm_dev_info = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .max_press = 0xff, + .rept_size = 8, + .read_data = itm_read_data, +}; +#endif + + +/***************************************************************************** + * eTurboTouch part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO +#ifndef MULTI_PACKET +#define MULTI_PACKET +#endif +static int eturbo_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + unsigned int shift; + + /* packets should start with sync */ + if (!(pkt[0] & 0x80)) + return 0; + + shift = (6 - (pkt[0] & 0x03)); + dev->x = ((pkt[3] << 7) | pkt[4]) >> shift; + dev->y = ((pkt[1] << 7) | pkt[2]) >> shift; + dev->touch = (pkt[0] & 0x10) ? 1 : 0; + + return 1; +} + +static int eturbo_get_pkt_len(unsigned char *buf, int len) +{ + if (buf[0] & 0x80) + return 5; + if (buf[0] == 0x01) + return 3; + return 0; +} + +static const struct usbtouch_device_info eturbo_dev_info = { + .min_xc = 0x0, + .max_xc = 0x07ff, + .min_yc = 0x0, + .max_yc = 0x07ff, + .rept_size = 8, + .get_pkt_len = eturbo_get_pkt_len, + .read_data = eturbo_read_data, +}; +#endif + + +/***************************************************************************** + * Gunze part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE +static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80)) + return 0; + + dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F); + dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F); + dev->touch = pkt[0] & 0x20; + + return 1; +} + +static const struct usbtouch_device_info gunze_dev_info = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 4, + .read_data = gunze_read_data, +}; +#endif + +/***************************************************************************** + * DMC TSC-10/25 Part + * + * Documentation about the controller and it's protocol can be found at + * http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf + * http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf + */ +#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10 + +/* supported data rates. currently using 130 */ +#define TSC10_RATE_POINT 0x50 +#define TSC10_RATE_30 0x40 +#define TSC10_RATE_50 0x41 +#define TSC10_RATE_80 0x42 +#define TSC10_RATE_100 0x43 +#define TSC10_RATE_130 0x44 +#define TSC10_RATE_150 0x45 + +/* commands */ +#define TSC10_CMD_RESET 0x55 +#define TSC10_CMD_RATE 0x05 +#define TSC10_CMD_DATA1 0x01 + +static int dmc_tsc10_init(struct usbtouch_usb *usbtouch) +{ + struct usb_device *dev = interface_to_usbdev(usbtouch->interface); + int ret; + + u8 *buf __free(kfree) = kmalloc(2, GFP_NOIO); + if (!buf) + return -ENOMEM; + + /* reset */ + buf[0] = buf[1] = 0xFF; + ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), + TSC10_CMD_RESET, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, 0, buf, 2, USB_CTRL_SET_TIMEOUT); + if (ret < 0) + return ret; + + if (buf[0] != 0x06) + return -ENODEV; + + /* TSC-25 data sheet specifies a delay after the RESET command */ + msleep(150); + + /* set coordinate output rate */ + buf[0] = buf[1] = 0xFF; + ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), + TSC10_CMD_RATE, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT); + if (ret < 0) + return ret; + + if (buf[0] != 0x06 && (buf[0] != 0x15 || buf[1] != 0x01)) + return -ENODEV; + + /* start sending data */ + return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + TSC10_CMD_DATA1, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); +} + +static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = ((pkt[2] & 0x03) << 8) | pkt[1]; + dev->y = ((pkt[4] & 0x03) << 8) | pkt[3]; + dev->touch = pkt[0] & 0x01; + + return 1; +} + +static const struct usbtouch_device_info dmc_tsc10_dev_info = { + .min_xc = 0x0, + .max_xc = 0x03ff, + .min_yc = 0x0, + .max_yc = 0x03ff, + .rept_size = 5, + .init = dmc_tsc10_init, + .read_data = dmc_tsc10_read_data, +}; +#endif + + +/***************************************************************************** + * IRTOUCH Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH +static int irtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = (pkt[3] << 8) | pkt[2]; + dev->y = (pkt[5] << 8) | pkt[4]; + dev->touch = (pkt[1] & 0x03) ? 1 : 0; + + return 1; +} + +static const struct usbtouch_device_info irtouch_dev_info = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 8, + .read_data = irtouch_read_data, +}; + +static const struct usbtouch_device_info irtouch_hires_dev_info = { + .min_xc = 0x0, + .max_xc = 0x7fff, + .min_yc = 0x0, + .max_yc = 0x7fff, + .rept_size = 8, + .read_data = irtouch_read_data, +}; +#endif + +/***************************************************************************** + * ET&T TC5UH/TC4UM part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB +static int tc45usb_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1]; + dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3]; + dev->touch = pkt[0] & 0x01; + + return 1; +} + +static const struct usbtouch_device_info tc45usb_dev_info = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 5, + .read_data = tc45usb_read_data, +}; +#endif + +/***************************************************************************** + * IdealTEK URTC1000 Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK +#ifndef MULTI_PACKET +#define MULTI_PACKET +#endif +static int idealtek_get_pkt_len(unsigned char *buf, int len) +{ + if (buf[0] & 0x80) + return 5; + if (buf[0] == 0x01) + return len; + return 0; +} + +static int idealtek_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + switch (pkt[0] & 0x98) { + case 0x88: + /* touch data in IdealTEK mode */ + dev->x = (pkt[1] << 5) | (pkt[2] >> 2); + dev->y = (pkt[3] << 5) | (pkt[4] >> 2); + dev->touch = (pkt[0] & 0x40) ? 1 : 0; + return 1; + + case 0x98: + /* touch data in MT emulation mode */ + dev->x = (pkt[2] << 5) | (pkt[1] >> 2); + dev->y = (pkt[4] << 5) | (pkt[3] >> 2); + dev->touch = (pkt[0] & 0x40) ? 1 : 0; + return 1; + + default: + return 0; + } +} + +static const struct usbtouch_device_info idealtek_dev_info = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 8, + .get_pkt_len = idealtek_get_pkt_len, + .read_data = idealtek_read_data, +}; +#endif + +/***************************************************************************** + * General Touch Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH +static int general_touch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = (pkt[2] << 8) | pkt[1]; + dev->y = (pkt[4] << 8) | pkt[3]; + dev->press = pkt[5] & 0xff; + dev->touch = pkt[0] & 0x01; + + return 1; +} + +static const struct usbtouch_device_info general_touch_dev_info = { + .min_xc = 0x0, + .max_xc = 0x7fff, + .min_yc = 0x0, + .max_yc = 0x7fff, + .rept_size = 7, + .read_data = general_touch_read_data, +}; +#endif + +/***************************************************************************** + * GoTop Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_GOTOP +static int gotop_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = ((pkt[1] & 0x38) << 4) | pkt[2]; + dev->y = ((pkt[1] & 0x07) << 7) | pkt[3]; + dev->touch = pkt[0] & 0x01; + + return 1; +} + +static const struct usbtouch_device_info gotop_dev_info = { + .min_xc = 0x0, + .max_xc = 0x03ff, + .min_yc = 0x0, + .max_yc = 0x03ff, + .rept_size = 4, + .read_data = gotop_read_data, +}; +#endif + +/***************************************************************************** + * JASTEC Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC +static int jastec_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = ((pkt[0] & 0x3f) << 6) | (pkt[2] & 0x3f); + dev->y = ((pkt[1] & 0x3f) << 6) | (pkt[3] & 0x3f); + dev->touch = (pkt[0] & 0x40) >> 6; + + return 1; +} + +static const struct usbtouch_device_info jastec_dev_info = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 4, + .read_data = jastec_read_data, +}; +#endif + +/***************************************************************************** + * Zytronic Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC +static int zytronic_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + struct usb_interface *intf = dev->interface; + + switch (pkt[0]) { + case 0x3A: /* command response */ + dev_dbg(&intf->dev, "%s: Command response %d\n", __func__, pkt[1]); + break; + + case 0xC0: /* down */ + dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7); + dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7); + dev->touch = 1; + dev_dbg(&intf->dev, "%s: down %d,%d\n", __func__, dev->x, dev->y); + return 1; + + case 0x80: /* up */ + dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7); + dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7); + dev->touch = 0; + dev_dbg(&intf->dev, "%s: up %d,%d\n", __func__, dev->x, dev->y); + return 1; + + default: + dev_dbg(&intf->dev, "%s: Unknown return %d\n", __func__, pkt[0]); + break; + } + + return 0; +} + +static const struct usbtouch_device_info zytronic_dev_info = { + .min_xc = 0x0, + .max_xc = 0x03ff, + .min_yc = 0x0, + .max_yc = 0x03ff, + .rept_size = 5, + .read_data = zytronic_read_data, + .irq_always = true, +}; +#endif + +/***************************************************************************** + * NEXIO Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO + +#define NEXIO_TIMEOUT 5000 +#define NEXIO_BUFSIZE 1024 +#define NEXIO_THRESHOLD 50 + +struct nexio_priv { + struct urb *ack; + unsigned char *ack_buf; +}; + +struct nexio_touch_packet { + u8 flags; /* 0xe1 = touch, 0xe1 = release */ + __be16 data_len; /* total bytes of touch data */ + __be16 x_len; /* bytes for X axis */ + __be16 y_len; /* bytes for Y axis */ + u8 data[]; +} __attribute__ ((packed)); + +static unsigned char nexio_ack_pkt[2] = { 0xaa, 0x02 }; +static unsigned char nexio_init_pkt[4] = { 0x82, 0x04, 0x0a, 0x0f }; + +static void nexio_ack_complete(struct urb *urb) +{ +} + +static int nexio_alloc(struct usbtouch_usb *usbtouch) +{ + struct nexio_priv *priv; + int ret = -ENOMEM; + + priv = kmalloc_obj(*priv); + if (!priv) + goto out_buf; + + usbtouch->priv = priv; + priv->ack_buf = kmemdup(nexio_ack_pkt, sizeof(nexio_ack_pkt), + GFP_KERNEL); + if (!priv->ack_buf) + goto err_priv; + + priv->ack = usb_alloc_urb(0, GFP_KERNEL); + if (!priv->ack) { + dev_dbg(&usbtouch->interface->dev, + "%s - usb_alloc_urb failed: usbtouch->ack\n", __func__); + goto err_ack_buf; + } + + return 0; + +err_ack_buf: + kfree(priv->ack_buf); +err_priv: + kfree(priv); +out_buf: + return ret; +} + +static int nexio_init(struct usbtouch_usb *usbtouch) +{ + struct usb_device *dev = interface_to_usbdev(usbtouch->interface); + struct usb_host_interface *interface = usbtouch->interface->cur_altsetting; + struct usb_endpoint_descriptor *ep_in, *ep_out; + struct nexio_priv *priv = usbtouch->priv; + int actual_len, i; + char *firmware_ver = NULL, *device_name = NULL; + int input_ep, output_ep; + int ret; + + /* find first input and output endpoint */ + ret = usb_find_common_endpoints(interface, &ep_in, &ep_out, NULL, NULL); + if (ret) + return -ENXIO; + + input_ep = usb_endpoint_num(ep_in); + output_ep = usb_endpoint_num(ep_out); + + u8 *buf __free(kfree) = kmalloc(NEXIO_BUFSIZE, GFP_NOIO); + if (!buf) + return -ENOMEM; + + /* two empty reads */ + for (i = 0; i < 2; i++) { + ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep), + buf, NEXIO_BUFSIZE, &actual_len, + NEXIO_TIMEOUT); + if (ret < 0) + return ret; + } + + /* send init command */ + memcpy(buf, nexio_init_pkt, sizeof(nexio_init_pkt)); + ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, output_ep), + buf, sizeof(nexio_init_pkt), &actual_len, + NEXIO_TIMEOUT); + if (ret < 0) + return ret; + + /* read replies */ + for (i = 0; i < 3; i++) { + memset(buf, 0, NEXIO_BUFSIZE); + ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep), + buf, NEXIO_BUFSIZE, &actual_len, + NEXIO_TIMEOUT); + if (ret < 0 || actual_len < 1 || buf[1] != actual_len) + continue; + switch (buf[0]) { + case 0x83: /* firmware version */ + if (!firmware_ver) + firmware_ver = kstrdup(&buf[2], GFP_NOIO); + break; + case 0x84: /* device name */ + if (!device_name) + device_name = kstrdup(&buf[2], GFP_NOIO); + break; + } + } + + printk(KERN_INFO "Nexio device: %s, firmware version: %s\n", + device_name, firmware_ver); + + kfree(firmware_ver); + kfree(device_name); + + usb_fill_bulk_urb(priv->ack, dev, usb_sndbulkpipe(dev, output_ep), + priv->ack_buf, sizeof(nexio_ack_pkt), + nexio_ack_complete, usbtouch); + + return 0; +} + +static void nexio_exit(struct usbtouch_usb *usbtouch) +{ + struct nexio_priv *priv = usbtouch->priv; + + usb_kill_urb(priv->ack); + usb_free_urb(priv->ack); + kfree(priv->ack_buf); + kfree(priv); +} + +static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt) +{ + struct device *dev = &usbtouch->interface->dev; + struct nexio_touch_packet *packet = (void *) pkt; + struct nexio_priv *priv = usbtouch->priv; + unsigned int data_len = be16_to_cpu(packet->data_len); + unsigned int x_len = be16_to_cpu(packet->x_len); + unsigned int y_len = be16_to_cpu(packet->y_len); + int x, y, begin_x, begin_y, end_x, end_y, w, h, ret; + + /* got touch data? */ + if ((pkt[0] & 0xe0) != 0xe0) + return 0; + + if (data_len > 0xff) + data_len -= 0x100; + if (x_len > 0xff) + x_len -= 0x80; + + if (data_len > usbtouch->data_size - sizeof(*packet)) + data_len = usbtouch->data_size - sizeof(*packet); + if (x_len > data_len) + x_len = data_len; + + /* send ACK */ + ret = usb_submit_urb(priv->ack, GFP_ATOMIC); + if (ret) + dev_warn(dev, "Failed to submit ACK URB: %d\n", ret); + + if (!input_abs_get_max(usbtouch->input, ABS_X)) { + input_set_abs_params(usbtouch->input, ABS_X, + 0, 2 * x_len, 0, 0); + input_set_abs_params(usbtouch->input, ABS_Y, + 0, 2 * y_len, 0, 0); + } + /* + * The device reports state of IR sensors on X and Y axes. + * Each byte represents "darkness" percentage (0-100) of one element. + * 17" touchscreen reports only 64 x 52 bytes so the resolution is low. + * This also means that there's a limited multi-touch capability but + * it's disabled (and untested) here as there's no X driver for that. + */ + begin_x = end_x = begin_y = end_y = -1; + for (x = 0; x < x_len; x++) { + if (begin_x == -1 && packet->data[x] > NEXIO_THRESHOLD) { + begin_x = x; + continue; + } + if (end_x == -1 && begin_x != -1 && packet->data[x] < NEXIO_THRESHOLD) { + end_x = x - 1; + for (y = x_len; y < data_len; y++) { + if (begin_y == -1 && packet->data[y] > NEXIO_THRESHOLD) { + begin_y = y - x_len; + continue; + } + if (end_y == -1 && + begin_y != -1 && packet->data[y] < NEXIO_THRESHOLD) { + end_y = y - 1 - x_len; + w = end_x - begin_x; + h = end_y - begin_y; +#if 0 + /* multi-touch */ + input_report_abs(usbtouch->input, + ABS_MT_TOUCH_MAJOR, max(w,h)); + input_report_abs(usbtouch->input, + ABS_MT_TOUCH_MINOR, min(x,h)); + input_report_abs(usbtouch->input, + ABS_MT_POSITION_X, 2*begin_x+w); + input_report_abs(usbtouch->input, + ABS_MT_POSITION_Y, 2*begin_y+h); + input_report_abs(usbtouch->input, + ABS_MT_ORIENTATION, w > h); + input_mt_sync(usbtouch->input); +#endif + /* single touch */ + usbtouch->x = 2 * begin_x + w; + usbtouch->y = 2 * begin_y + h; + usbtouch->touch = packet->flags & 0x01; + begin_y = end_y = -1; + return 1; + } + } + begin_x = end_x = -1; + } + + } + return 0; +} + +static const struct usbtouch_device_info nexio_dev_info = { + .rept_size = 1024, + .irq_always = true, + .read_data = nexio_read_data, + .alloc = nexio_alloc, + .init = nexio_init, + .exit = nexio_exit, +}; +#endif + + +/***************************************************************************** + * ELO part + */ + +#ifdef CONFIG_TOUCHSCREEN_USB_ELO + +static int elo_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = (pkt[3] << 8) | pkt[2]; + dev->y = (pkt[5] << 8) | pkt[4]; + dev->touch = pkt[6] > 0; + dev->press = pkt[6]; + + return 1; +} + +static const struct usbtouch_device_info elo_dev_info = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .max_press = 0xff, + .rept_size = 8, + .read_data = elo_read_data, +}; +#endif + + +/***************************************************************************** + * Generic Part + */ +static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch, + unsigned char *pkt, int len) +{ + const struct usbtouch_device_info *type = usbtouch->type; + + if (!type->read_data(usbtouch, pkt)) + return; + + input_report_key(usbtouch->input, BTN_TOUCH, usbtouch->touch); + + if (swap_xy) { + input_report_abs(usbtouch->input, ABS_X, usbtouch->y); + input_report_abs(usbtouch->input, ABS_Y, usbtouch->x); + } else { + input_report_abs(usbtouch->input, ABS_X, usbtouch->x); + input_report_abs(usbtouch->input, ABS_Y, usbtouch->y); + } + if (type->max_press) + input_report_abs(usbtouch->input, ABS_PRESSURE, usbtouch->press); + input_sync(usbtouch->input); +} + + +#ifdef MULTI_PACKET +static void usbtouch_process_multi(struct usbtouch_usb *usbtouch, + unsigned char *pkt, int len) +{ + unsigned char *buffer; + int pkt_len, pos, buf_len, tmp; + + /* process buffer */ + if (unlikely(usbtouch->buf_len)) { + /* try to get size */ + pkt_len = usbtouch->type->get_pkt_len( + usbtouch->buffer, usbtouch->buf_len); + + /* drop? */ + if (unlikely(!pkt_len)) + goto out_flush_buf; + + /* need to append -pkt_len bytes before able to get size */ + if (unlikely(pkt_len < 0)) { + int append = -pkt_len; + if (unlikely(append > len)) + append = len; + if (usbtouch->buf_len + append >= usbtouch->type->rept_size) + goto out_flush_buf; + memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, append); + usbtouch->buf_len += append; + + pkt_len = usbtouch->type->get_pkt_len( + usbtouch->buffer, usbtouch->buf_len); + if (pkt_len < 0) + return; + } + + /* append */ + tmp = pkt_len - usbtouch->buf_len; + if (usbtouch->buf_len + tmp >= usbtouch->type->rept_size) + goto out_flush_buf; + memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, tmp); + usbtouch_process_pkt(usbtouch, usbtouch->buffer, pkt_len); + + buffer = pkt + tmp; + buf_len = len - tmp; + } else { + buffer = pkt; + buf_len = len; + } + + /* loop over the received packet, process */ + pos = 0; + while (pos < buf_len) { + /* get packet len */ + pkt_len = usbtouch->type->get_pkt_len(buffer + pos, + buf_len - pos); + + /* unknown packet: skip one byte */ + if (unlikely(!pkt_len)) { + pos++; + continue; + } + + /* full packet: process */ + if (likely((pkt_len > 0) && (pkt_len <= buf_len - pos))) { + usbtouch_process_pkt(usbtouch, buffer + pos, pkt_len); + } else { + /* incomplete packet: save in buffer */ + memcpy(usbtouch->buffer, buffer + pos, buf_len - pos); + usbtouch->buf_len = buf_len - pos; + return; + } + pos += pkt_len; + } + +out_flush_buf: + usbtouch->buf_len = 0; + return; +} +#else +static void usbtouch_process_multi(struct usbtouch_usb *usbtouch, + unsigned char *pkt, int len) +{ + dev_WARN_ONCE(&usbtouch->interface->dev, 1, + "Protocol has ->get_pkt_len() without #define MULTI_PACKET"); +} +#endif + +static void usbtouch_irq(struct urb *urb) +{ + struct usbtouch_usb *usbtouch = urb->context; + struct device *dev = &usbtouch->interface->dev; + int retval; + + switch (urb->status) { + case 0: + /* success */ + break; + case -ETIME: + /* this urb is timing out */ + dev_dbg(dev, + "%s - urb timed out - was the device unplugged?\n", + __func__); + return; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + case -EPIPE: + /* this urb is terminated, clean up */ + dev_dbg(dev, "%s - urb shutting down with status: %d\n", + __func__, urb->status); + return; + default: + dev_dbg(dev, "%s - nonzero urb status received: %d\n", + __func__, urb->status); + goto exit; + } + + usbtouch->process_pkt(usbtouch, usbtouch->data, urb->actual_length); + +exit: + usb_mark_last_busy(interface_to_usbdev(usbtouch->interface)); + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + dev_err(dev, "%s - usb_submit_urb failed with result: %d\n", + __func__, retval); +} + +static int usbtouch_start_io(struct usbtouch_usb *usbtouch) +{ + guard(mutex)(&usbtouch->pm_mutex); + + if (!usbtouch->type->irq_always) + if (usb_submit_urb(usbtouch->irq, GFP_KERNEL)) + return -EIO; + + usbtouch->interface->needs_remote_wakeup = 1; + usbtouch->is_open = true; + + return 0; +} + +static int usbtouch_open(struct input_dev *input) +{ + struct usbtouch_usb *usbtouch = input_get_drvdata(input); + int r; + + usbtouch->irq->dev = interface_to_usbdev(usbtouch->interface); + + r = usb_autopm_get_interface(usbtouch->interface) ? -EIO : 0; + if (r) + return r; + + r = usbtouch_start_io(usbtouch); + + usb_autopm_put_interface(usbtouch->interface); + return r; +} + +static void usbtouch_close(struct input_dev *input) +{ + struct usbtouch_usb *usbtouch = input_get_drvdata(input); + int r; + + scoped_guard(mutex, &usbtouch->pm_mutex) { + if (!usbtouch->type->irq_always) + usb_kill_urb(usbtouch->irq); + usbtouch->is_open = false; + } + + r = usb_autopm_get_interface(usbtouch->interface); + usbtouch->interface->needs_remote_wakeup = 0; + if (!r) + usb_autopm_put_interface(usbtouch->interface); +} + +static int usbtouch_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); + + usb_kill_urb(usbtouch->irq); + + return 0; +} + +static int usbtouch_resume(struct usb_interface *intf) +{ + struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); + + guard(mutex)(&usbtouch->pm_mutex); + + if (usbtouch->is_open || usbtouch->type->irq_always) + return usb_submit_urb(usbtouch->irq, GFP_NOIO); + + return 0; +} + +static int usbtouch_reset_resume(struct usb_interface *intf) +{ + struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); + int err; + + /* reinit the device */ + if (usbtouch->type->init) { + err = usbtouch->type->init(usbtouch); + if (err) { + dev_dbg(&intf->dev, + "%s - type->init() failed, err: %d\n", + __func__, err); + return err; + } + } + + /* restart IO if needed */ + guard(mutex)(&usbtouch->pm_mutex); + + if (usbtouch->is_open) + return usb_submit_urb(usbtouch->irq, GFP_NOIO); + + return 0; +} + +static void usbtouch_free_buffers(struct usb_device *udev, + struct usbtouch_usb *usbtouch) +{ + usb_free_coherent(udev, usbtouch->data_size, + usbtouch->data, usbtouch->data_dma); + kfree(usbtouch->buffer); +} + +static int usbtouch_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usbtouch_usb *usbtouch; + struct input_dev *input_dev; + struct usb_endpoint_descriptor *endpoint; + struct usb_device *udev = interface_to_usbdev(intf); + const struct usbtouch_device_info *type; + int err; + + /* some devices are ignored */ + type = (const struct usbtouch_device_info *)id->driver_info; + if (!type) + return -ENODEV; + + err = usb_find_int_in_endpoint(intf->cur_altsetting, &endpoint); + if (err) { + err = usb_find_bulk_in_endpoint(intf->cur_altsetting, &endpoint); + if (err) + return -ENXIO; + } + + err = -ENOMEM; + usbtouch = kzalloc_obj(*usbtouch); + input_dev = input_allocate_device(); + if (!usbtouch || !input_dev) + goto out_free; + + mutex_init(&usbtouch->pm_mutex); + usbtouch->type = type; + + usbtouch->data_size = type->rept_size; + if (type->get_pkt_len) { + /* + * When dealing with variable-length packets we should + * not request more than wMaxPacketSize bytes at once + * as we do not know if there is more data coming or + * we filled exactly wMaxPacketSize bytes and there is + * nothing else. + */ + usbtouch->data_size = min(usbtouch->data_size, + usb_endpoint_maxp(endpoint)); + } + + usbtouch->data = usb_alloc_coherent(udev, usbtouch->data_size, + GFP_KERNEL, &usbtouch->data_dma); + if (!usbtouch->data) + goto out_free; + + if (type->get_pkt_len) { + usbtouch->buffer = kmalloc(type->rept_size, GFP_KERNEL); + if (!usbtouch->buffer) + goto out_free_buffers; + usbtouch->process_pkt = usbtouch_process_multi; + } else { + usbtouch->process_pkt = usbtouch_process_pkt; + } + + usbtouch->irq = usb_alloc_urb(0, GFP_KERNEL); + if (!usbtouch->irq) { + dev_dbg(&intf->dev, + "%s - usb_alloc_urb failed: usbtouch->irq\n", __func__); + goto out_free_buffers; + } + + usbtouch->interface = intf; + usbtouch->input = input_dev; + + if (udev->manufacturer) + strscpy(usbtouch->name, udev->manufacturer, sizeof(usbtouch->name)); + + if (udev->product) { + if (udev->manufacturer) + strlcat(usbtouch->name, " ", sizeof(usbtouch->name)); + strlcat(usbtouch->name, udev->product, sizeof(usbtouch->name)); + } + + if (!strlen(usbtouch->name)) + snprintf(usbtouch->name, sizeof(usbtouch->name), + "USB Touchscreen %04x:%04x", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + usb_make_path(udev, usbtouch->phys, sizeof(usbtouch->phys)); + strlcat(usbtouch->phys, "/input0", sizeof(usbtouch->phys)); + + input_dev->name = usbtouch->name; + input_dev->phys = usbtouch->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->dev.parent = &intf->dev; + + input_set_drvdata(input_dev, usbtouch); + + input_dev->open = usbtouch_open; + input_dev->close = usbtouch_close; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, type->min_xc, type->max_xc, 0, 0); + input_set_abs_params(input_dev, ABS_Y, type->min_yc, type->max_yc, 0, 0); + if (type->max_press) + input_set_abs_params(input_dev, ABS_PRESSURE, type->min_press, + type->max_press, 0, 0); + + if (usb_endpoint_type(endpoint) == USB_ENDPOINT_XFER_INT) + usb_fill_int_urb(usbtouch->irq, udev, + usb_rcvintpipe(udev, endpoint->bEndpointAddress), + usbtouch->data, usbtouch->data_size, + usbtouch_irq, usbtouch, endpoint->bInterval); + else + usb_fill_bulk_urb(usbtouch->irq, udev, + usb_rcvbulkpipe(udev, endpoint->bEndpointAddress), + usbtouch->data, usbtouch->data_size, + usbtouch_irq, usbtouch); + + usbtouch->irq->dev = udev; + usbtouch->irq->transfer_dma = usbtouch->data_dma; + usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + /* device specific allocations */ + if (type->alloc) { + err = type->alloc(usbtouch); + if (err) { + dev_dbg(&intf->dev, + "%s - type->alloc() failed, err: %d\n", + __func__, err); + goto out_free_urb; + } + } + + /* device specific initialisation*/ + if (type->init) { + err = type->init(usbtouch); + if (err) { + dev_dbg(&intf->dev, + "%s - type->init() failed, err: %d\n", + __func__, err); + goto out_do_exit; + } + } + + err = input_register_device(usbtouch->input); + if (err) { + dev_dbg(&intf->dev, + "%s - input_register_device failed, err: %d\n", + __func__, err); + goto out_do_exit; + } + + usb_set_intfdata(intf, usbtouch); + + if (usbtouch->type->irq_always) { + /* this can't fail */ + usb_autopm_get_interface(intf); + err = usb_submit_urb(usbtouch->irq, GFP_KERNEL); + if (err) { + usb_autopm_put_interface(intf); + dev_err(&intf->dev, + "%s - usb_submit_urb failed with result: %d\n", + __func__, err); + goto out_unregister_input; + } + } + + return 0; + +out_unregister_input: + input_unregister_device(input_dev); + input_dev = NULL; +out_do_exit: + if (type->exit) + type->exit(usbtouch); +out_free_urb: + usb_free_urb(usbtouch->irq); +out_free_buffers: + usbtouch_free_buffers(udev, usbtouch); +out_free: + input_free_device(input_dev); + kfree(usbtouch); + return err; +} + +static void usbtouch_disconnect(struct usb_interface *intf) +{ + struct usbtouch_usb *usbtouch = usb_get_intfdata(intf); + + if (!usbtouch) + return; + + dev_dbg(&intf->dev, + "%s - usbtouch is initialized, cleaning up\n", __func__); + + usb_set_intfdata(intf, NULL); + /* this will stop IO via close */ + input_unregister_device(usbtouch->input); + usb_free_urb(usbtouch->irq); + if (usbtouch->type->exit) + usbtouch->type->exit(usbtouch); + usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch); + kfree(usbtouch); +} + +static const struct attribute_group *usbtouch_groups[] = { +#ifdef CONFIG_TOUCHSCREEN_USB_3M + &mtouch_attr_group, +#endif + NULL +}; + +static const struct usb_device_id usbtouch_devices[] = { +#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX + /* ignore the HID capable devices, handled by usbhid */ + { USB_DEVICE_INTERFACE_CLASS(0x0eef, 0x0001, USB_INTERFACE_CLASS_HID), + .driver_info = 0 }, + { USB_DEVICE_INTERFACE_CLASS(0x0eef, 0x0002, USB_INTERFACE_CLASS_HID), + .driver_info = 0 }, + + /* normal device IDs */ + { USB_DEVICE(0x3823, 0x0001), + .driver_info = (kernel_ulong_t)&egalax_dev_info }, + { USB_DEVICE(0x3823, 0x0002), + .driver_info = (kernel_ulong_t)&egalax_dev_info }, + { USB_DEVICE(0x0123, 0x0001), + .driver_info = (kernel_ulong_t)&egalax_dev_info }, + { USB_DEVICE(0x0eef, 0x0001), + .driver_info = (kernel_ulong_t)&egalax_dev_info }, + { USB_DEVICE(0x0eef, 0x0002), + .driver_info = (kernel_ulong_t)&egalax_dev_info }, + { USB_DEVICE(0x1234, 0x0001), + .driver_info = (kernel_ulong_t)&egalax_dev_info }, + { USB_DEVICE(0x1234, 0x0002), + .driver_info = (kernel_ulong_t)&egalax_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT + { USB_DEVICE(0x134c, 0x0001), + .driver_info = (kernel_ulong_t)&panjit_dev_info }, + { USB_DEVICE(0x134c, 0x0002), + .driver_info = (kernel_ulong_t)&panjit_dev_info }, + { USB_DEVICE(0x134c, 0x0003), + .driver_info = (kernel_ulong_t)&panjit_dev_info }, + { USB_DEVICE(0x134c, 0x0004), + .driver_info = (kernel_ulong_t)&panjit_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_3M + { USB_DEVICE(0x0596, 0x0001), + .driver_info = (kernel_ulong_t)&mtouch_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ITM + { USB_DEVICE(0x0403, 0xf9e9), + .driver_info = (kernel_ulong_t)&itm_dev_info }, + { USB_DEVICE(0x16e3, 0xf9e9), + .driver_info = (kernel_ulong_t)&itm_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO + { USB_DEVICE(0x1234, 0x5678), + .driver_info = (kernel_ulong_t)&eturbo_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE + { USB_DEVICE(0x0637, 0x0001), + .driver_info = (kernel_ulong_t)&gunze_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10 + { USB_DEVICE(0x0afa, 0x03e8), + .driver_info = (kernel_ulong_t)&dmc_tsc10_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH + { USB_DEVICE(0x255e, 0x0001), + .driver_info = (kernel_ulong_t)&irtouch_dev_info }, + { USB_DEVICE(0x595a, 0x0001), + .driver_info = (kernel_ulong_t)&irtouch_dev_info }, + { USB_DEVICE(0x6615, 0x0001), + .driver_info = (kernel_ulong_t)&irtouch_dev_info }, + { USB_DEVICE(0x6615, 0x0012), + .driver_info = (kernel_ulong_t)&irtouch_hires_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK + { USB_DEVICE(0x1391, 0x1000), + .driver_info = (kernel_ulong_t)&idealtek_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH + { USB_DEVICE(0x0dfc, 0x0001), + .driver_info = (kernel_ulong_t)&general_touch_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_GOTOP + { USB_DEVICE(0x08f2, 0x007f), + .driver_info = (kernel_ulong_t)&gotop_dev_info }, + { USB_DEVICE(0x08f2, 0x00ce), + .driver_info = (kernel_ulong_t)&gotop_dev_info }, + { USB_DEVICE(0x08f2, 0x00f4), + .driver_info = (kernel_ulong_t)&gotop_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC + { USB_DEVICE(0x0f92, 0x0001), + .driver_info = (kernel_ulong_t)&jastec_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_E2I + { USB_DEVICE(0x1ac7, 0x0001), + .driver_info = (kernel_ulong_t)&e2i_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC + { USB_DEVICE(0x14c8, 0x0003), + .driver_info = (kernel_ulong_t)&zytronic_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB + /* TC5UH */ + { USB_DEVICE(0x0664, 0x0309), + .driver_info = (kernel_ulong_t)&tc45usb_dev_info }, + /* TC4UM */ + { USB_DEVICE(0x0664, 0x0306), + .driver_info = (kernel_ulong_t)&tc45usb_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO + /* data interface only */ + { USB_DEVICE_AND_INTERFACE_INFO(0x10f0, 0x2002, 0x0a, 0x00, 0x00), + .driver_info = (kernel_ulong_t)&nexio_dev_info }, + { USB_DEVICE_AND_INTERFACE_INFO(0x1870, 0x0001, 0x0a, 0x00, 0x00), + .driver_info = (kernel_ulong_t)&nexio_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_ELO + { USB_DEVICE(0x04e7, 0x0020), + .driver_info = (kernel_ulong_t)&elo_dev_info }, +#endif + +#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH + { USB_DEVICE(0x7374, 0x0001), + .driver_info = (kernel_ulong_t)&etouch_dev_info }, +#endif + + { } +}; +MODULE_DEVICE_TABLE(usb, usbtouch_devices); + +static struct usb_driver usbtouch_driver = { + .name = "usbtouchscreen", + .probe = usbtouch_probe, + .disconnect = usbtouch_disconnect, + .suspend = usbtouch_suspend, + .resume = usbtouch_resume, + .reset_resume = usbtouch_reset_resume, + .id_table = usbtouch_devices, + .dev_groups = usbtouch_groups, + .supports_autosuspend = 1, +}; + +module_usb_driver(usbtouch_driver); + +MODULE_AUTHOR("Daniel Ritz <daniel.ritz@gmx.ch>"); +MODULE_DESCRIPTION("USB Touchscreen Driver"); +MODULE_LICENSE("GPL"); + +MODULE_ALIAS("touchkitusb"); +MODULE_ALIAS("itmtouch"); +MODULE_ALIAS("mtouchusb"); |