diff options
Diffstat (limited to 'drivers/hwmon/pmbus/aps-379.c')
| -rw-r--r-- | drivers/hwmon/pmbus/aps-379.c | 155 |
1 files changed, 155 insertions, 0 deletions
diff --git a/drivers/hwmon/pmbus/aps-379.c b/drivers/hwmon/pmbus/aps-379.c new file mode 100644 index 000000000..3ec0940ae --- /dev/null +++ b/drivers/hwmon/pmbus/aps-379.c @@ -0,0 +1,155 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Hardware monitoring driver for Sony APS-379 Power Supplies + * + * Copyright 2026 Allied Telesis Labs + */ + +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pmbus.h> +#include "pmbus.h" + +/* + * The VOUT format used by the chip is linear11, not linear16. Provide a hard + * coded VOUT_MODE that says VOUT is in linear mode with a fixed exponent of + * 2^-4. + */ +#define APS_379_VOUT_MODE ((u8)(-4 & 0x1f)) + +static int aps_379_read_byte_data(struct i2c_client *client, int page, int reg) +{ + switch (reg) { + case PMBUS_VOUT_MODE: + return APS_379_VOUT_MODE; + default: + return -ENODATA; + } +} + +/* + * The APS-379 uses linear11 format instead of linear16. We've reported the exponent + * via the PMBUS_VOUT_MODE so we just return the mantissa here. + */ +static int aps_379_read_vout(struct i2c_client *client) +{ + int ret; + + ret = pmbus_read_word_data(client, 0, 0xff, PMBUS_READ_VOUT); + if (ret < 0) + return ret; + + return clamp_val(sign_extend32(ret & 0x7ff, 10), 0, 0x3ff); +} + +static int aps_379_read_word_data(struct i2c_client *client, int page, int phase, int reg) +{ + switch (reg) { + case PMBUS_VOUT_UV_WARN_LIMIT: + case PMBUS_VOUT_OV_WARN_LIMIT: + case PMBUS_VOUT_UV_FAULT_LIMIT: + case PMBUS_VOUT_OV_FAULT_LIMIT: + case PMBUS_IOUT_OC_WARN_LIMIT: + case PMBUS_IOUT_UC_FAULT_LIMIT: + case PMBUS_UT_WARN_LIMIT: + case PMBUS_UT_FAULT_LIMIT: + case PMBUS_OT_WARN_LIMIT: + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_PIN_OP_WARN_LIMIT: + case PMBUS_POUT_OP_WARN_LIMIT: + case PMBUS_MFR_IIN_MAX: + case PMBUS_MFR_PIN_MAX: + case PMBUS_MFR_VOUT_MIN: + case PMBUS_MFR_VOUT_MAX: + case PMBUS_MFR_IOUT_MAX: + case PMBUS_MFR_POUT_MAX: + case PMBUS_MFR_MAX_TEMP_1: + /* These commands return data but it is invalid/un-documented */ + return -ENXIO; + case PMBUS_IOUT_OC_FAULT_LIMIT: + /* + * The standard requires this to be a value in Amps but it's + * actually a percentage of the rated output (123A for + * 110-240Vac, 110A for 90-100Vac) which we don't know. Ignore + * it rather than guessing. + */ + return -ENXIO; + case PMBUS_READ_VOUT: + return aps_379_read_vout(client); + default: + return -ENODATA; + } +} + +static struct pmbus_driver_info aps_379_info = { + .pages = 1, + .format[PSC_VOLTAGE_OUT] = linear, + .format[PSC_CURRENT_OUT] = linear, + .format[PSC_POWER] = linear, + .format[PSC_TEMPERATURE] = linear, + .format[PSC_FAN] = linear, + .func[0] = PMBUS_HAVE_VOUT | + PMBUS_HAVE_IOUT | + PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | + PMBUS_HAVE_TEMP | + PMBUS_HAVE_FAN12, + .read_byte_data = aps_379_read_byte_data, + .read_word_data = aps_379_read_word_data, +}; + +static const struct i2c_device_id aps_379_id[] = { + { .name = "aps-379" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, aps_379_id); + +static int aps_379_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + u8 buf[I2C_SMBUS_BLOCK_MAX + 1] = { 0 }; + int ret; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_BYTE_DATA + | I2C_FUNC_SMBUS_READ_WORD_DATA + | I2C_FUNC_SMBUS_READ_BLOCK_DATA)) + return -ENODEV; + + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf); + if (ret < 0) { + dev_err(dev, "Failed to read Manufacturer Model\n"); + return ret; + } + + if (strncasecmp(buf, aps_379_id[0].name, strlen(aps_379_id[0].name)) != 0) { + buf[ret] = '\0'; + dev_err(dev, "Unsupported Manufacturer Model '%s'\n", buf); + return -ENODEV; + } + + return pmbus_do_probe(client, &aps_379_info); +} + +static const struct of_device_id __maybe_unused aps_379_of_match[] = { + { .compatible = "sony,aps-379" }, + {}, +}; +MODULE_DEVICE_TABLE(of, aps_379_of_match); + +static struct i2c_driver aps_379_driver = { + .driver = { + .name = "aps-379", + .of_match_table = of_match_ptr(aps_379_of_match), + }, + .probe = aps_379_probe, + .id_table = aps_379_id, +}; + +module_i2c_driver(aps_379_driver); + +MODULE_AUTHOR("Chris Packham"); +MODULE_DESCRIPTION("PMBus driver for Sony APS-379"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS("PMBUS"); |