diff options
Diffstat (limited to 'Documentation/devicetree/bindings/misc')
21 files changed, 1537 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/misc/aspeed,ast2400-cvic.yaml b/Documentation/devicetree/bindings/misc/aspeed,ast2400-cvic.yaml new file mode 100644 index 000000000..accf1a7ec --- /dev/null +++ b/Documentation/devicetree/bindings/misc/aspeed,ast2400-cvic.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/aspeed,ast2400-cvic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed Coprocessor Vectored Interrupt Controller + +maintainers: + - Andrew Jeffery <andrew@codeconstruct.com.au> + +description: + The Aspeed AST2400 and AST2500 SoCs have a controller that provides interrupts + to the ColdFire coprocessor. It's not a normal interrupt controller and it + would be rather inconvenient to create an interrupt tree for it, as it + somewhat shares some of the same sources as the main ARM interrupt controller + but with different numbers. + + The AST2500 also supports a software generated interrupt. + +properties: + compatible: + items: + - enum: + - aspeed,ast2400-cvic + - aspeed,ast2500-cvic + - const: aspeed,cvic + + reg: + maxItems: 1 + + valid-sources: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 1 + description: + A bitmap of supported sources for the implementation. + + copro-sw-interrupts: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + description: + A list of interrupt numbers that can be used as software interrupts from + the ARM to the coprocessor. + +required: + - compatible + - reg + - valid-sources + +additionalProperties: false + +examples: + - | + interrupt-controller@1e6c2000 { + compatible = "aspeed,ast2500-cvic", "aspeed,cvic"; + reg = <0x1e6c2000 0x80>; + valid-sources = <0xffffffff>; + copro-sw-interrupts = <1>; + }; diff --git a/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml b/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml new file mode 100644 index 000000000..59b83ea5e --- /dev/null +++ b/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml @@ -0,0 +1,26 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2020 NXP +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/fsl,dpaa2-console.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DPAA2 console support + +maintainers: + - Laurentiu Tudor <laurentiu.tudor@nxp.com> + +properties: + compatible: + const: fsl,dpaa2-console + + reg: + maxItems: 1 + description: A standard property. Specifies the region where the MCFBA + (MC firmware base address) register can be found. + +required: + - compatible + - reg + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml new file mode 100644 index 000000000..801f305e0 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.yaml @@ -0,0 +1,187 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/fsl,qoriq-mc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Management Complex + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: | + The Freescale Management Complex (fsl-mc) is a hardware resource + manager that manages specialized hardware objects used in + network-oriented packet processing applications. After the fsl-mc + block is enabled, pools of hardware resources are available, such as + queues, buffer pools, I/O interfaces. These resources are building + blocks that can be used to create functional hardware objects/devices + such as network interfaces, crypto accelerator instances, L2 switches, + etc. + + For an overview of the DPAA2 architecture and fsl-mc bus see: + Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst + + As described in the above overview, all DPAA2 objects in a DPRC share the + same hardware "isolation context" and a 10-bit value called an ICID + (isolation context id) is expressed by the hardware to identify + the requester. + + The generic 'iommus' property is insufficient to describe the relationship + between ICIDs and IOMMUs, so an iommu-map property is used to define + the set of possible ICIDs under a root DPRC and how they map to + an IOMMU. + + For generic IOMMU bindings, see + Documentation/devicetree/bindings/iommu/iommu.txt. + + For arm-smmu binding, see: + Documentation/devicetree/bindings/iommu/arm,smmu.yaml. + + The MSI writes are accompanied by sideband data which is derived from the ICID. + The msi-map property is used to associate the devices with both the ITS + controller and the sideband data which accompanies the writes. + + For generic MSI bindings, see + Documentation/devicetree/bindings/interrupt-controller/msi.txt. + + For GICv3 and GIC ITS bindings, see: + Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml. + +properties: + compatible: + enum: + - fsl,qoriq-mc + description: + Must be "fsl,qoriq-mc". A Freescale Management Complex + compatible with this binding must have Block Revision + Registers BRR1 and BRR2 at offset 0x0BF8 and 0x0BFC in + the MC control register region. + + reg: + items: + - description: + the first region is the command portal for the + this machine and must always be present + + - description: + the second region is the MC control registers. This + region may not be present in some scenarios, such + as in the device tree presented to a virtual machine. + + ranges: + description: | + A standard property. Defines the mapping between the child + MC address space and the parent system address space. + + The MC address space is defined by 3 components: + <region type> <offset hi> <offset lo> + + Valid values for region type are + 0x0 - MC portals + 0x1 - QBMAN portals + + "#address-cells": + const: 3 + + "#size-cells": + const: 1 + + iommu-map: + description: | + Maps an ICID to an IOMMU and associated iommu-specifier + data. + + The property is an arbitrary number of tuples of + (icid-base,iommu,iommu-base,length). + + Any ICID i in the interval [icid-base, icid-base + length) is + associated with the listed IOMMU, with the iommu-specifier + (i - icid-base + iommu-base). + + msi-map: + description: | + Maps an ICID to a GIC ITS and associated msi-specifier + data. + + The property is an arbitrary number of tuples of + (icid-base,gic-its,msi-base,length). + + Any ICID in the interval [icid-base, icid-base + length) is + associated with the listed GIC ITS, with the msi-specifier + (i - icid-base + msi-base). + + msi-parent: + deprecated: true + maxItems: 1 + description: + Describes the MSI controller node handling message + interrupts for the MC. When there is no translation + between the ICID and deviceID this property can be used + to describe the MSI controller used by the devices on the + mc-bus. + The use of this property for mc-bus is deprecated. Please + use msi-map. + + dma-coherent: true + + dpmacs: + type: object + description: + The fsl-mc node may optionally have dpmac sub-nodes that describe + the relationship between the Ethernet MACs which belong to the MC + and the Ethernet PHYs on the system board. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + '^ethernet@[a-f0-9]+$': + $ref: /schemas/net/fsl,qoriq-mc-dpmac.yaml + + additionalProperties: false + +required: + - compatible + - reg + - ranges + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + reg = <0x0c000000 0x40>, /* MC portal base */ + <0x08340000 0x40000>; /* MC control reg */ + /* + * Region type 0x0 - MC portals + * Region type 0x1 - QBMAN portals + */ + ranges = <0x0 0x0 0x8 0x0c000000 0x4000000 + 0x1 0x0 0x8 0x18000000 0x8000000>; + + /* define map for ICIDs 23-64 */ + iommu-map = <23 &smmu 23 41>; + /* define msi map for ICIDs 23-64 */ + msi-map = <23 &its 23 41>; + #address-cells = <3>; + #size-cells = <1>; + + dpmacs { + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <1>; + phy-handle = <&mdio0_phy0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/misc/ge-achc.yaml b/Documentation/devicetree/bindings/misc/ge-achc.yaml new file mode 100644 index 000000000..ff07aa62e --- /dev/null +++ b/Documentation/devicetree/bindings/misc/ge-achc.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +# Copyright (C) 2021 GE Inc. +# Copyright (C) 2021 Collabora Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/ge-achc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GE Healthcare USB Management Controller + +description: | + A device which handles data acquisition from compatible USB based peripherals. + SPI is used for device management. + + Note: This device does not expose the peripherals as USB devices. + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +properties: + compatible: + items: + - const: ge,achc + - const: nxp,kinetis-k20 + + clocks: + maxItems: 1 + + vdd-supply: + description: Digital power supply regulator on VDD pin + + vdda-supply: + description: Analog power supply regulator on VDDA pin + + reg: + items: + - description: Control interface + - description: Firmware programming interface + + reset-gpios: + description: GPIO used for hardware reset. + maxItems: 1 + +required: + - compatible + - clocks + - reg + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + spi@1 { + compatible = "ge,achc", "nxp,kinetis-k20"; + reg = <1>, <0>; + clocks = <&achc_24M>; + reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/misc/google,android-pipe.yaml b/Documentation/devicetree/bindings/misc/google,android-pipe.yaml new file mode 100644 index 000000000..9e8046fd3 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/google,android-pipe.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/google,android-pipe.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Android Goldfish QEMU Pipe + +maintainers: + - Kuan-Wei Chiu <visitorckw@gmail.com> + +description: + Android QEMU pipe virtual device generated by Android emulator. + +properties: + compatible: + const: google,android-pipe + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + pipe@ff018000 { + compatible = "google,android-pipe"; + reg = <0xff018000 0x2000>; + interrupts = <18>; + }; diff --git a/Documentation/devicetree/bindings/misc/idt,89hpesx.yaml b/Documentation/devicetree/bindings/misc/idt,89hpesx.yaml new file mode 100644 index 000000000..452236e79 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/idt,89hpesx.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/idt,89hpesx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: EEPROM / CSR SMBus-slave interface of IDT 89HPESx devices + +maintainers: + - Serge Semin <fancer.lancer@gmail.com> + +select: + properties: + compatible: + contains: + pattern: '^idt,89hpes' + required: + - compatible + +properties: + compatible: + oneOf: + - pattern: '^idt,89hpes(8nt2|12nt3|12n3a?|24n3a?|(12|24)t3g2|4t4g2|10t4g2|[56]t5|8t5a?)$' + - pattern: '^idt,89hpes(6t6g2|16t7|(24t6|32t8|48t12|16t4a?)(g2)?)$' + - pattern: '^idt,89hpes(24nt6a|32nt8[ab]|12nt12|16nt16|24nt24|32nt24[ab])g2$' + - pattern: '^idt,89hpes((32h8|48h12a?|22h16|34h16|64h16a?)(g2)?|16h16)$' + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + '^eeprom@': + $ref: /schemas/eeprom/at24.yaml# + unevaluatedProperties: false + + properties: + compatible: + description: Only a subset of devices are supported + pattern: ',24c(32|64|128|256|512)$' + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + idt@74 { + compatible = "idt,89hpes32nt8ag2"; + reg = <0x74>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + read-only; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/misc/ifm-csi.txt b/Documentation/devicetree/bindings/misc/ifm-csi.txt new file mode 100644 index 000000000..5bdfffb0b --- /dev/null +++ b/Documentation/devicetree/bindings/misc/ifm-csi.txt @@ -0,0 +1,41 @@ +IFM camera sensor interface on mpc5200 LocalPlus bus + +Required properties: +- compatible: "ifm,o2d-csi" +- reg: specifies sensor chip select number and associated address range +- interrupts: external interrupt line number and interrupt sense mode + of the interrupt line signaling frame valid events +- gpios: three gpio-specifiers for "capture", "reset" and "master enable" + GPIOs (strictly in this order). +- ifm,csi-clk-handle: the phandle to a node in the DT describing the sensor + clock generator. This node is usually a general purpose timer controller. +- ifm,csi-addr-bus-width: address bus width (valid values are 16, 24, 25) +- ifm,csi-data-bus-width: data bus width (valid values are 8 and 16) +- ifm,csi-wait-cycles: sensor bus wait cycles + +Optional properties: +- ifm,csi-byte-swap: if this property is present, the byte swapping on + the bus will be enabled. + +Example: + + csi@3,0 { + compatible = "ifm,o2d-csi"; + reg = <3 0 0x00100000>; /* CS 3, 1 MiB range */ + interrupts = <1 1 2>; /* IRQ1, edge falling */ + + ifm,csi-clk-handle = <&timer7>; + gpios = <&gpio_simple 23 0 /* image_capture */ + &gpio_simple 26 0 /* image_reset */ + &gpio_simple 29 0>; /* image_master_en */ + + ifm,csi-addr-bus-width = <24>; + ifm,csi-data-bus-width = <8>; + ifm,csi-wait-cycles = <0>; + }; + +The base address of the used chip select is specified in the +ranges property of the parent localbus node, for example: + + ranges = <0 0 0xff000000 0x01000000 + 3 0 0xe3000000 0x00100000>; diff --git a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml new file mode 100644 index 000000000..1198d87d0 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/intel,ixp4xx-ahb-queue-manager.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel IXP4xx AHB Queue Manager + +maintainers: + - Linus Walleij <linusw@kernel.org> + +description: | + The IXP4xx AHB Queue Manager maintains queues as circular buffers in + an 8KB embedded SRAM along with hardware pointers. It is used by both + the XScale processor and the NPEs (Network Processing Units) in the + IXP4xx for accelerating queues, especially for networking. Clients pick + queues from the queue manager with foo-queue = <&qmgr N> where the + &qmgr is a phandle to the queue manager and N is the queue resource + number. The queue resources available and their specific purpose + on a certain IXP4xx system will vary. + +properties: + compatible: + items: + - const: intel,ixp4xx-ahb-queue-manager + + reg: + maxItems: 1 + + interrupts: + items: + - description: Interrupt for queues 0-31 + - description: Interrupt for queues 32-63 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + qmgr: queue-manager@60000000 { + compatible = "intel,ixp4xx-ahb-queue-manager"; + reg = <0x60000000 0x4000>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/misc/lwn,bk4-spi.yaml b/Documentation/devicetree/bindings/misc/lwn,bk4-spi.yaml new file mode 100644 index 000000000..73fbf672e --- /dev/null +++ b/Documentation/devicetree/bindings/misc/lwn,bk4-spi.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/lwn,bk4-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Liebherr's BK4 external SPI controller + +maintainers: + - Lukasz Majewski <lukma@denx.de> + +description: | + Liebherr's BK4 external SPI controller is a device which handles data + acquisition from compatible industrial peripherals. + The SPI is used for data and management purposes in both master and + slave modes. + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: lwn,bk4-spi + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 30000000 + + fsl,spi-cs-sck-delay: true + + fsl,spi-sck-cs-delay: true + +required: + - compatible + - spi-max-frequency + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + spidev@0 { + compatible = "lwn,bk4-spi"; + reg = <0>; + spi-max-frequency = <30000000>; + fsl,spi-cs-sck-delay = <200>; + fsl,spi-sck-cs-delay = <400>; + }; + }; diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.yaml b/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.yaml new file mode 100644 index 000000000..87fcce7cb --- /dev/null +++ b/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/nvidia,tegra186-misc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra186 (and later) MISC register block + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: The MISC register block found on Tegra186 and later SoCs contains + registers that can be used to identify a given chip and various strapping + options. + +properties: + compatible: + enum: + - nvidia,tegra186-misc + - nvidia,tegra194-misc + - nvidia,tegra234-misc + - nvidia,tegra264-misc + + reg: + items: + - description: physical address and length of the registers which + contain revision and debug features + - description: physical address and length of the registers which + indicate strapping options + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + misc@100000 { + compatible = "nvidia,tegra186-misc"; + reg = <0x00100000 0xf000>, + <0x0010f000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.yaml b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.yaml new file mode 100644 index 000000000..6f504fa74 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/nvidia,tegra20-apbmisc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra APBMISC block + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - nvidia,tegra210-apbmisc + - nvidia,tegra124-apbmisc + - nvidia,tegra114-apbmisc + - nvidia,tegra30-apbmisc + - const: nvidia,tegra20-apbmisc + + - items: + - const: nvidia,tegra20-apbmisc + + reg: + items: + - description: physical address and length of the registers which + contain revision and debug features + - description: physical address and length of the registers which + indicate strapping options + + nvidia,long-ram-code: + description: If present, the RAM code is long (4 bit). If not, short + (2 bit). + type: boolean + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + apbmisc@70000800 { + compatible = "nvidia,tegra20-apbmisc"; + reg = <0x70000800 0x64>, /* Chip revision */ + <0x70000008 0x04>; /* Strapping options */ + }; diff --git a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml new file mode 100644 index 000000000..e99342f26 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +# Copyright (C) 2019,2020 Lubomir Rintel <lkundrak@v3.sk> +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/olpc,xo1.75-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OLPC XO-1.75 Embedded Controller + +description: | + This binding describes the Embedded Controller acting as a SPI bus master + on a OLPC XO-1.75 laptop computer. + + The embedded controller requires the SPI controller driver to signal + readiness to receive a transfer (that is, when TX FIFO contains the + response data) by strobing the ACK pin with the ready signal. See the + "ready-gpios" property of the SSP binding as documented in: + <Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml>. + +maintainers: + - Lubomir Rintel <lkundrak@v3.sk> + +properties: + compatible: + const: olpc,xo1.75-ec + + cmd-gpios: + description: GPIO uspecifier of the CMD pin + maxItems: 1 + + spi-cpha: true + +required: + - compatible + - cmd-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + spi-slave; + #address-cells = <0>; + #size-cells = <0>; + ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>; + + slave { + compatible = "olpc,xo1.75-ec"; + spi-cpha; + cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/misc/pci1de4,1.yaml b/Documentation/devicetree/bindings/misc/pci1de4,1.yaml new file mode 100644 index 000000000..17a8c19af --- /dev/null +++ b/Documentation/devicetree/bindings/misc/pci1de4,1.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/pci1de4,1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RaspberryPi RP1 MFD PCI device + +maintainers: + - A. della Porta <andrea.porta@suse.com> + +description: + The RaspberryPi RP1 is a PCI multi function device containing + peripherals ranging from Ethernet to USB controller, I2C, SPI + and others. + The peripherals are accessed by addressing the PCI BAR1 region. + +allOf: + - $ref: /schemas/pci/pci-ep-bus.yaml + +properties: + compatible: + additionalItems: true + maxItems: 3 + items: + - const: pci1de4,1 + + reg: + maxItems: 1 + description: The PCI Bus-Device-Function address. + + '#interrupt-cells': + const: 2 + description: | + Specifies respectively the interrupt number and flags as defined + in include/dt-bindings/interrupt-controller/irq.h. + Since all interrupts are active high, only IRQ_TYPE_LEVEL_HIGH + and IRQ_TYPE_EDGE_RISING can be specified as type flags. + The supported values for the interrupt number are: + - IO BANK0: 0 + - IO BANK1: 1 + - IO BANK2: 2 + - AUDIO IN: 3 + - AUDIO OUT: 4 + - PWM0: 5 + - ETH: 6 + - I2C0: 7 + - I2C1: 8 + - I2C2: 9 + - I2C3: 10 + - I2C4: 11 + - I2C5: 12 + - I2C6: 13 + - I2S0: 14 + - I2S1: 15 + - I2S2: 16 + - SDIO0: 17 + - SDIO1: 18 + - SPI0: 19 + - SPI1: 20 + - SPI2: 21 + - SPI3: 22 + - SPI4: 23 + - SPI5: 24 + - UART0: 25 + - TIMER0: 26 + - TIMER1: 27 + - TIMER2: 28 + - TIMER3: 29 + - USB HOST0: 30 + - USB HOST0-0: 31 + - USB HOST0-1: 32 + - USB HOST0-2: 33 + - USB HOST0-3: 34 + - USB HOST1: 35 + - USB HOST1-0: 36 + - USB HOST1-1: 37 + - USB HOST1-2: 38 + - USB HOST1-3: 39 + - DMA: 40 + - PWM1: 41 + - UART1: 42 + - UART2: 43 + - UART3: 44 + - UART4: 45 + - UART5: 46 + - MIPI0: 47 + - MIPI1: 48 + - VIDEO OUT: 49 + - PIO0: 50 + - PIO1: 51 + - ADC FIFO: 52 + - PCIE OUT: 53 + - SPI6: 54 + - SPI7: 55 + - SPI8: 56 + - PROC MISC: 57 + - SYSCFG: 58 + - CLOCKS DEFAULT: 59 + - VBUSCTRL: 60 + + interrupt-controller: true + +unevaluatedProperties: false + +required: + - compatible + - reg + - '#interrupt-cells' + - interrupt-controller + - pci-ep-bus@1 + +examples: + - | + pci { + #address-cells = <3>; + #size-cells = <2>; + + dev@0,0 { + compatible = "pci1de4,1"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + ranges = <0x01 0x00 0x00000000 0x82010000 0x00 0x00 0x00 0x400000>; + #address-cells = <3>; + #size-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + pci_ep_bus: pci-ep-bus@1 { + compatible = "simple-bus"; + ranges = <0x00 0x40000000 0x01 0x00 0x00000000 0x00 0x00400000>; + dma-ranges = <0x10 0x00000000 0x43000000 0x10 0x00000000 0x10 0x00000000>; + #address-cells = <2>; + #size-cells = <2>; + + rp1_clocks: clocks@40018000 { + compatible = "raspberrypi,rp1-clocks"; + reg = <0x00 0x40018000 0x0 0x10038>; + #clock-cells = <1>; + clocks = <&clk_rp1_xosc>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/misc/pvpanic-mmio.txt b/Documentation/devicetree/bindings/misc/pvpanic-mmio.txt new file mode 100644 index 000000000..985e90736 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/pvpanic-mmio.txt @@ -0,0 +1,29 @@ +* QEMU PVPANIC MMIO Configuration bindings + +QEMU's emulation / virtualization targets provide the following PVPANIC +MMIO Configuration interface on the "virt" machine. +type: + +- a read-write, 16-bit wide data register. + +QEMU exposes the data register to guests as memory mapped registers. + +Required properties: + +- compatible: "qemu,pvpanic-mmio". +- reg: the MMIO region used by the device. + * Bytes 0x0 Write panic event to the reg when guest OS panics. + * Bytes 0x1 Reserved. + +Example: + +/ { + #size-cells = <0x2>; + #address-cells = <0x2>; + + pvpanic-mmio@9060000 { + compatible = "qemu,pvpanic-mmio"; + reg = <0x0 0x9060000 0x0 0x2>; + }; +}; + diff --git a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml new file mode 100644 index 000000000..49d2a5e8b --- /dev/null +++ b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml @@ -0,0 +1,161 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/qcom,fastrpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm FastRPC Driver + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + The FastRPC implements an IPC (Inter-Processor Communication) + mechanism that allows for clients to transparently make remote method + invocations across DSP and APPS boundaries. This enables developers + to offload tasks to the DSP and free up the application processor for + other tasks. + +properties: + compatible: + oneOf: + - enum: + - qcom,kaanapali-fastrpc + - qcom,fastrpc + - items: + - enum: + - qcom,glymur-fastrpc + - qcom,hawi-fastrpc + - qcom,maili-fastrpc + - qcom,nord-fastrpc + - const: qcom,kaanapali-fastrpc + + label: + enum: + - adsp + - mdsp + - sdsp + - cdsp + - cdsp1 + - cdsp2 + - cdsp3 + - gdsp0 + - gdsp1 + + memory-region: + maxItems: 1 + description: + Phandle to a node describing memory to be used for remote heap CMA. + + qcom,glink-channels: + description: + A list of channels tied to this function, used for matching + the function to a set of virtual channels. + $ref: /schemas/types.yaml#/definitions/string-array + items: + - const: fastrpcglink-apps-dsp + + qcom,non-secure-domain: + description: + Used to mark the current domain as non-secure. + type: boolean + + qcom,smd-channels: + description: + Channel name used for the RPM communication + $ref: /schemas/types.yaml#/definitions/string-array + items: + - const: fastrpcsmd-apps-dsp + + qcom,vmids: + description: + Virtual machine IDs for remote processor. + $ref: /schemas/types.yaml#/definitions/uint32-array + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "(compute-)?cb@[0-9]*$": + type: object + + description: > + Each subnode of the Fastrpc represents compute context banks available on the dsp. + + properties: + compatible: + const: qcom,fastrpc-compute-cb + + reg: + maxItems: 1 + + dma-coherent: true + + iommus: + minItems: 1 + maxItems: 10 + + qcom,nsessions: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 1 + description: > + A value indicating how many sessions can share this context bank. + + required: + - compatible + - reg + + additionalProperties: false + +required: + - compatible + - label + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/mailbox/qcom-ipcc.h> + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + label = "lpass"; + qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0541 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0542 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0543 0x0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml b/Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml new file mode 100644 index 000000000..e12d80be0 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/qemu,vcpu-stall-detector.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: VCPU stall detector + +description: + This binding describes a CPU stall detector mechanism for virtual CPUs + which is accessed through MMIO. + +maintainers: + - Sebastian Ene <sebastianene@google.com> + +properties: + compatible: + enum: + - qemu,vcpu-stall-detector + + reg: + maxItems: 1 + + clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + The internal clock of the stall detector peripheral measure in Hz used + to decrement its internal counter register on each tick. + Defaults to 10 if unset. + default: 10 + + interrupts: + maxItems: 1 + + timeout-sec: + description: | + The stall detector expiration timeout measured in seconds. + Defaults to 8 if unset. Please note that it also takes into account the + time spent while the VCPU is not running. + default: 8 + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + vmwdt@9030000 { + compatible = "qemu,vcpu-stall-detector"; + reg = <0x9030000 0x10000>; + clock-frequency = <10>; + timeout-sec = <8>; + interrupts = <GIC_PPI 15 IRQ_TYPE_EDGE_RISING>; + }; diff --git a/Documentation/devicetree/bindings/misc/ti,fpc202.yaml b/Documentation/devicetree/bindings/misc/ti,fpc202.yaml new file mode 100644 index 000000000..71c5859d2 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/ti,fpc202.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/ti,fpc202.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI FPC202 dual port controller with expanded IOs + +maintainers: + - Romain Gantois <romain.gantois@bootlin.com> + +allOf: + - $ref: /schemas/i2c/i2c-atr.yaml# + +properties: + compatible: + const: ti,fpc202 + + reg: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + + enable-gpios: + description: + Specifier for the GPIO connected to the EN pin. + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^i2c@[0-1]$": + $ref: /schemas/i2c/i2c-controller.yaml# + description: Downstream device ports 0 and 1 + + properties: + reg: + maxItems: 1 + description: + Downstream port ID + + required: + - "#address-cells" + - "#size-cells" + - reg + + unevaluatedProperties: false + + "^led@1[4-b]$": + $ref: /schemas/leds/common.yaml# + description: Output GPIO line with advanced LED features enabled. + + properties: + reg: + minimum: 0x14 + maximum: 0x1b + description: + GPIO line ID + + required: + - reg + + unevaluatedProperties: false + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + i2c-atr@f { + compatible = "ti,fpc202"; + reg = <0xf>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + led@14 { + reg = <0x14>; + label = "phy0:green:indicator"; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml b/Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml new file mode 100644 index 000000000..0c9a84448 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/ti,j721e-esm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 ESM + +maintainers: + - Neha Malcom Francis <n-francis@ti.com> + +description: + The ESM (Error Signaling Module) is an IP block on TI K3 devices + that allows handling of safety events somewhat similar to what interrupt + controller would do. The safety signals have their separate paths within + the SoC, and they are handled by the ESM, which routes them to the proper + destination, which can be system reset, interrupt controller, etc. In the + simplest configuration the signals are just routed to reset the SoC. + +properties: + compatible: + const: ti,j721e-esm + + reg: + maxItems: 1 + + ti,esm-pins: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + integer array of ESM interrupt pins to route to external event pin + which can be used to reset the SoC. + minItems: 1 + maxItems: 255 + +required: + - compatible + - reg + - ti,esm-pins + +additionalProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + esm@700000 { + compatible = "ti,j721e-esm"; + reg = <0x0 0x700000 0x0 0x1000>; + ti,esm-pins = <344>, <345>; + }; + }; diff --git a/Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml b/Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml new file mode 100644 index 000000000..9bd210337 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/xlnx,sd-fec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx SDFEC(16nm) IP + +maintainers: + - Cvetic, Dragan <dragan.cvetic@amd.com> + - Erim, Salih <salih.erim@amd.com> + +description: + The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block + which provides high-throughput LDPC and Turbo Code implementations. + The LDPC decode & encode functionality is capable of covering a range of + customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality + principally covers codes used by LTE. The FEC Engine offers significant + power and area savings versus implementations done in the FPGA fabric. + +properties: + compatible: + const: xlnx,sd-fec-1.1 + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 8 + additionalItems: true + items: + - description: Main processing clock for processing core + - description: AXI4-Lite memory-mapped slave interface clock + - description: Control input AXI4-Stream Slave interface clock + - description: DIN AXI4-Stream Slave interface clock + - description: Status output AXI4-Stream Master interface clock + - description: DOUT AXI4-Stream Master interface clock + - description: DIN_WORDS AXI4-Stream Slave interface clock + - description: DOUT_WORDS AXI4-Stream Master interface clock + + clock-names: + allOf: + - minItems: 2 + maxItems: 8 + additionalItems: true + items: + - const: core_clk + - const: s_axi_aclk + - items: + enum: + - core_clk + - s_axi_aclk + - s_axis_ctrl_aclk + - s_axis_din_aclk + - m_axis_status_aclk + - m_axis_dout_aclk + - s_axis_din_words_aclk + - m_axis_dout_words_aclk + + interrupts: + maxItems: 1 + + xlnx,sdfec-code: + description: + The SD-FEC integrated block supports Low Density Parity Check (LDPC) + decoding and encoding and Turbo code decoding. The LDPC codes used are + highly configurable, and the specific code used can be specified on + a codeword-by-codeword basis. The Turbo code decoding is required by LTE + standard. + $ref: /schemas/types.yaml#/definitions/string + items: + enum: [ ldpc, turbo ] + + xlnx,sdfec-din-width: + description: + Configures the DIN AXI stream where a value of 1 + configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width + of "4x128b". + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2, 4 ] + + xlnx,sdfec-din-words: + description: + A value 0 indicates that the DIN_WORDS interface is + driven with a fixed value and is not present on the device, a value of 1 + configures the DIN_WORDS to be block based, while a value of 2 configures the + DIN_WORDS input to be supplied for each AXI transaction. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2 ] + + xlnx,sdfec-dout-width: + description: + Configures the DOUT AXI stream where a value of 1 configures a width of "1x128b", + 2 a width of "2x128b" and 4 configures a width of "4x128b". + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2, 4 ] + + xlnx,sdfec-dout-words: + description: + A value 0 indicates that the DOUT_WORDS interface is + driven with a fixed value and is not present on the device, a value of 1 + configures the DOUT_WORDS to be block based, while a value of 2 configures the + DOUT_WORDS input to be supplied for each AXI transaction. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2 ] + +required: + - compatible + - reg + - clocks + - clock-names + - xlnx,sdfec-code + - xlnx,sdfec-din-width + - xlnx,sdfec-din-words + - xlnx,sdfec-dout-width + - xlnx,sdfec-dout-words + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + sd-fec@a0040000 { + compatible = "xlnx,sd-fec-1.1"; + reg = <0xa0040000 0x40000>; + clocks = <&misc_clk_2>, <&misc_clk_0>, <&misc_clk_1>, <&misc_clk_1>, + <&misc_clk_1>, <&misc_clk_1>; + clock-names = "core_clk", "s_axi_aclk", "s_axis_ctrl_aclk", + "s_axis_din_aclk", "m_axis_status_aclk", + "m_axis_dout_aclk"; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + xlnx,sdfec-code = "ldpc"; + xlnx,sdfec-din-width = <2>; + xlnx,sdfec-din-words = <0>; + xlnx,sdfec-dout-width = <1>; + xlnx,sdfec-dout-words = <0>; + }; + diff --git a/Documentation/devicetree/bindings/misc/xlnx,tmr-inject.yaml b/Documentation/devicetree/bindings/misc/xlnx,tmr-inject.yaml new file mode 100644 index 000000000..1b6020e4e --- /dev/null +++ b/Documentation/devicetree/bindings/misc/xlnx,tmr-inject.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/xlnx,tmr-inject.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Triple Modular Redundancy(TMR) Inject IP + +maintainers: + - Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com> + +description: | + The Triple Modular Redundancy(TMR) Inject core provides functional fault + injection by changing selected MicroBlaze instructions, which provides the + possibility to verify that the TMR subsystem error detection and fault + recovery logic is working properly. + +properties: + compatible: + enum: + - xlnx,tmr-inject-1.0 + + reg: + maxItems: 1 + + xlnx,magic: + minimum: 0 + maximum: 255 + description: | + Magic number, When configured it allows the controller to perform + recovery. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - xlnx,magic + +additionalProperties: false + +examples: + - | + fault-inject@44a30000 { + compatible = "xlnx,tmr-inject-1.0"; + reg = <0x44a10000 0x10000>; + xlnx,magic = <0x46>; + }; diff --git a/Documentation/devicetree/bindings/misc/xlnx,tmr-manager.yaml b/Documentation/devicetree/bindings/misc/xlnx,tmr-manager.yaml new file mode 100644 index 000000000..27de12147 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/xlnx,tmr-manager.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/xlnx,tmr-manager.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Triple Modular Redundancy(TMR) Manager IP + +maintainers: + - Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com> + +description: | + The Triple Modular Redundancy(TMR) Manager is responsible for handling the + TMR subsystem state, including fault detection and error recovery. The core + is triplicated in each of the sub-blocks in the TMR subsystem, and provides + majority voting of its internal state. + +properties: + compatible: + enum: + - xlnx,tmr-manager-1.0 + + reg: + maxItems: 1 + + xlnx,magic1: + minimum: 0 + maximum: 255 + description: + Magic byte 1, When configured it allows the controller to perform + recovery. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - xlnx,magic1 + +additionalProperties: false + +examples: + - | + tmr-manager@44a10000 { + compatible = "xlnx,tmr-manager-1.0"; + reg = <0x44a10000 0x10000>; + xlnx,magic1 = <0x46>; + }; |