diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mailbox')
43 files changed, 4138 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml b/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml new file mode 100644 index 000000000..87d31963c --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/allwinner,sun6i-a31-msgbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner sunxi Message Box + +maintainers: + - Samuel Holland <samuel@sholland.org> + +description: | + The hardware message box on sun6i, sun8i, sun9i, and sun50i SoCs is a + two-user mailbox controller containing 8 unidirectional FIFOs. An interrupt + is raised for received messages, but software must poll to know when a + transmitted message has been acknowledged by the remote user. Each FIFO can + hold four 32-bit messages; when a FIFO is full, clients must wait before + attempting more transmissions. + + Refer to ./mailbox.txt for generic information about mailbox device-tree + bindings. + +properties: + compatible: + oneOf: + - items: + - enum: + - allwinner,sun8i-a83t-msgbox + - allwinner,sun8i-h3-msgbox + - allwinner,sun9i-a80-msgbox + - allwinner,sun50i-a64-msgbox + - allwinner,sun50i-h6-msgbox + - const: allwinner,sun6i-a31-msgbox + - const: allwinner,sun6i-a31-msgbox + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: bus clock + + resets: + maxItems: 1 + description: bus reset + + interrupts: + maxItems: 1 + + '#mbox-cells': + const: 1 + description: first cell is the channel number (0-7) + +required: + - compatible + - reg + - clocks + - resets + - interrupts + - '#mbox-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun8i-h3-ccu.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/sun8i-h3-ccu.h> + + msgbox: mailbox@1c17000 { + compatible = "allwinner,sun8i-h3-msgbox", + "allwinner,sun6i-a31-msgbox"; + reg = <0x01c17000 0x1000>; + clocks = <&ccu CLK_BUS_MSGBOX>; + resets = <&ccu RST_BUS_MSGBOX>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt b/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt new file mode 100644 index 000000000..c4dd93f1f --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt @@ -0,0 +1,48 @@ +Altera Mailbox Driver +===================== + +Required properties: +- compatible : "altr,mailbox-1.0". +- reg : physical base address of the mailbox and length of + memory mapped region. +- #mbox-cells: Common mailbox binding property to identify the number + of cells required for the mailbox specifier. Should be 1. + +Optional properties: +- interrupts : interrupt number. The interrupt specifier format + depends on the interrupt controller parent. + +Example: + mbox_tx: mailbox@100 { + compatible = "altr,mailbox-1.0"; + reg = <0x100 0x8>; + interrupt-parent = < &gic_0 >; + interrupts = <5>; + #mbox-cells = <1>; + }; + + mbox_rx: mailbox@200 { + compatible = "altr,mailbox-1.0"; + reg = <0x200 0x8>; + interrupt-parent = < &gic_0 >; + interrupts = <6>; + #mbox-cells = <1>; + }; + +Mailbox client +=============== +"mboxes" and the optional "mbox-names" (please see +Documentation/devicetree/bindings/mailbox/mailbox.txt for details). Each value +of the mboxes property should contain a phandle to the mailbox controller +device node and second argument is the channel index. It must be 0 (hardware +support only one channel).The equivalent "mbox-names" property value can be +used to give a name to the communication channel to be used by the client user. + +Example: + mclient0: mclient0@400 { + compatible = "client-1.0"; + reg = <0x400 0x10>; + mbox-names = "mbox-tx", "mbox-rx"; + mboxes = <&mbox_tx 0>, + <&mbox_rx 0>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml new file mode 100644 index 000000000..79963c987 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/amlogic,meson-gxbb-mhu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson Message-Handling-Unit Controller + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +description: | + The Amlogic's Meson SoCs Message-Handling-Unit (MHU) is a mailbox controller + that has 3 independent channels/links to communicate with remote processor(s). + MHU links are hardwired on a platform. A link raises interrupt for any + received data. However, there is no specified way of knowing if the sent + data has been read by the remote. This driver assumes the sender polls + STAT register and the remote clears it after having read the data. + +properties: + compatible: + enum: + - amlogic,meson-gxbb-mhu + + reg: + maxItems: 1 + + interrupts: + maxItems: 3 + description: + Contains the interrupt information corresponding to each of the 3 links + of MHU. + + "#mbox-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + mailbox@c883c404 { + compatible = "amlogic,meson-gxbb-mhu"; + reg = <0xc883c404 0x4c>; + interrupts = <208>, <209>, <210>; + #mbox-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/apm,xgene-slimpro-mbox.yaml b/Documentation/devicetree/bindings/mailbox/apm,xgene-slimpro-mbox.yaml new file mode 100644 index 000000000..815f08d61 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/apm,xgene-slimpro-mbox.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/apm,xgene-slimpro-mbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: APM X-Gene SLIMpro mailbox + +maintainers: + - Khuong Dinh <khuong@os.amperecomputing.com> + +description: + The APM X-Gene SLIMpro mailbox is used to communicate messages between + the ARM64 processors and the Cortex M3 (dubbed SLIMpro). It uses a simple + interrupt based door bell mechanism and can exchange simple messages using the + internal registers. + +properties: + compatible: + const: apm,xgene-slimpro-mbox + + reg: + maxItems: 1 + + interrupts: + items: + - description: mailbox channel 0 doorbell + - description: mailbox channel 1 doorbell + - description: mailbox channel 2 doorbell + - description: mailbox channel 3 doorbell + - description: mailbox channel 4 doorbell + - description: mailbox channel 5 doorbell + - description: mailbox channel 6 doorbell + - description: mailbox channel 7 doorbell + + '#mbox-cells': + description: Number of mailbox channel. + const: 1 + +required: + - compatible + - reg + - interrupts + - '#mbox-cells' + +additionalProperties: false + +examples: + - | + mailbox@10540000 { + compatible = "apm,xgene-slimpro-mbox"; + reg = <0x10540000 0xa000>; + #mbox-cells = <1>; + interrupts = <0x0 0x0 0x4>, + <0x0 0x1 0x4>, + <0x0 0x2 0x4>, + <0x0 0x3 0x4>, + <0x0 0x4 0x4>, + <0x0 0x5 0x4>, + <0x0 0x6 0x4>, + <0x0 0x7 0x4>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml b/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml new file mode 100644 index 000000000..28985cc62 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/apple,mailbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple Mailbox Controller + +maintainers: + - Hector Martin <marcan@marcan.st> + - Sven Peter <sven@svenpeter.dev> + +description: + The Apple mailbox consists of two FIFOs used to exchange 64+32 bit + messages between the main CPU and a co-processor. Multiple instances + of this mailbox can be found on Apple SoCs. + One of the two FIFOs is used to send data to a co-processor while the other + FIFO is used for the other direction. + Various clients implement different IPC protocols based on these simple + messages and shared memory buffers. + +properties: + compatible: + oneOf: + - description: + ASC mailboxes are the most common variant found on the M1 used + for example for the display controller, the system management + controller and the NVMe coprocessor. + items: + - enum: + - apple,t8103-asc-mailbox + - apple,t8112-asc-mailbox + - apple,t6000-asc-mailbox + - apple,t6020-asc-mailbox + - const: apple,asc-mailbox-v4 + + - description: + An older ASC mailbox interface found on T2 and A11 that is also + used for the NVMe coprocessor and the system management + controller. + items: + - const: apple,t8015-asc-mailbox + + - description: + M3 mailboxes are an older variant with a slightly different MMIO + interface still found on the M1. It is used for the Thunderbolt + co-processors. + items: + - enum: + - apple,t8103-m3-mailbox + - apple,t8112-m3-mailbox + - apple,t6000-m3-mailbox + - const: apple,m3-mailbox-v2 + + reg: + maxItems: 1 + + interrupts: + items: + - description: send fifo is empty interrupt + - description: send fifo is not empty interrupt + - description: receive fifo is empty interrupt + - description: receive fifo is not empty interrupt + + interrupt-names: + items: + - const: send-empty + - const: send-not-empty + - const: recv-empty + - const: recv-not-empty + + "#mbox-cells": + const: 0 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + mailbox@77408000 { + compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4"; + reg = <0x77408000 0x4000>; + interrupts = <1 583 4>, <1 584 4>, <1 585 4>, <1 586 4>; + interrupt-names = "send-empty", "send-not-empty", + "recv-empty", "recv-not-empty"; + #mbox-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml new file mode 100644 index 000000000..e45b661e8 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml @@ -0,0 +1,168 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/arm,mhu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM MHU Mailbox Controller + +maintainers: + - Jassi Brar <jaswinder.singh@linaro.org> + +description: | + The ARM's Message-Handling-Unit (MHU) is a mailbox controller that has 3 + independent channels/links to communicate with remote processor(s). MHU links + are hardwired on a platform. A link raises interrupt for any received data. + However, there is no specified way of knowing if the sent data has been read + by the remote. This driver assumes the sender polls STAT register and the + remote clears it after having read the data. The last channel is specified to + be a 'Secure' resource, hence can't be used by Linux running NS. + + The MHU hardware also allows operations in doorbell mode. The MHU drives the + interrupt signal using a 32-bit register, with all 32-bits logically ORed + together. It provides a set of registers to enable software to set, clear and + check the status of each of the bits of this register independently. The use + of 32 bits per interrupt line enables software to provide more information + about the source of the interrupt. For example, each bit of the register can + be associated with a type of event that can contribute to raising the + interrupt. Each of the 32-bits can be used as "doorbell" to alert the remote + processor. + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + enum: + - arm,mhu + - arm,mhu-doorbell + required: + - compatible + +properties: + compatible: + oneOf: + - description: Data transfer mode + items: + - const: arm,mhu + - const: arm,primecell + + - description: Doorbell mode + items: + - const: arm,mhu-doorbell + - const: arm,primecell + + reg: + maxItems: 1 + + interrupts: + minItems: 2 + items: + - description: low-priority non-secure + - description: high-priority non-secure + - description: Secure + + clocks: + maxItems: 1 + + clock-names: + items: + - const: apb_pclk + + '#mbox-cells': + description: | + Set to 1 in data transfer mode and represents index of the channel. + Set to 2 in doorbell mode and represents index of the channel and doorbell + number. + enum: [ 1, 2 ] + +required: + - compatible + - reg + - interrupts + - '#mbox-cells' + +additionalProperties: false + +examples: + # Data transfer mode. + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + mhuA: mailbox@2b1f0000 { + #mbox-cells = <1>; + compatible = "arm,mhu", "arm,primecell"; + reg = <0 0x2b1f0000 0 0x1000>; + interrupts = <0 36 4>, /* LP-NonSecure */ + <0 35 4>, /* HP-NonSecure */ + <0 37 4>; /* Secure */ + clocks = <&clock 0 2 1>; + clock-names = "apb_pclk"; + }; + }; + + firmware { + scpi { + compatible = "arm,scpi"; + mboxes = <&mhuA 1>; /* HP-NonSecure */ + shmem = <&cpu_scp_hpri>; /* HP-NonSecure */ + + scpi_devpd: power-controller { + compatible = "arm,scpi-power-domains"; + num-domains = <2>; + #power-domain-cells = <1>; + }; + }; + }; + + # Doorbell mode. + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + mhuB: mailbox@2b2f0000 { + #mbox-cells = <2>; + compatible = "arm,mhu-doorbell", "arm,primecell"; + reg = <0 0x2b2f0000 0 0x1000>; + interrupts = <0 36 4>, /* LP-NonSecure */ + <0 35 4>, /* HP-NonSecure */ + <0 37 4>; /* Secure */ + clocks = <&clock 0 2 1>; + clock-names = "apb_pclk"; + }; + }; + + firmware { + scmi { + compatible = "arm,scmi"; + mboxes = <&mhuB 0 0>, /* LP-NonSecure, 1st doorbell */ + <&mhuB 0 1>; /* LP-NonSecure, 2nd doorbell */ + mbox-names = "tx", "rx"; + shmem = <&cpu_scp_lpri0>, + <&cpu_scp_lpri1>; + + #address-cells = <1>; + #size-cells = <0>; + + scmi_devpd: protocol@11 { + reg = <0x11>; + #power-domain-cells = <1>; + }; + + scmi_dvfs: protocol@13 { + reg = <0x13>; + #clock-cells = <1>; + + mboxes = <&mhuB 1 2>, /* HP-NonSecure, 3rd doorbell */ + <&mhuB 1 3>; /* HP-NonSecure, 4th doorbell */ + mbox-names = "tx", "rx"; + shmem = <&cpu_scp_hpri0>, + <&cpu_scp_hpri1>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml new file mode 100644 index 000000000..3828d77f6 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml @@ -0,0 +1,207 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/arm,mhuv2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM MHUv2 Mailbox Controller + +maintainers: + - Tushar Khandelwal <tushar.khandelwal@arm.com> + - Viresh Kumar <viresh.kumar@linaro.org> + +description: | + The Arm Message Handling Unit (MHU) Version 2 is a mailbox controller that has + between 1 and 124 channel windows (each 32-bit wide) to provide unidirectional + communication with remote processor(s), where the number of channel windows + are implementation dependent. + + Given the unidirectional nature of the controller, an MHUv2 mailbox may only + be written to or read from. If a pair of MHU controllers is implemented + between two processing elements to provide bidirectional communication, these + must be specified as two separate mailboxes. + + If the interrupts property is present in device tree node, then its treated as + a "receiver" mailbox, otherwise a "sender". + + An MHU controller must be specified along with the supported transport + protocols. The transport protocols determine the method of data transmission + as well as the number of provided mailbox channels. + + Following are the possible transport protocols. + + - Data-transfer: Each transfer is made of one or more words, using one or more + channel windows. + + - Doorbell: Each transfer is made up of single bit flag, using any one of the + bits in a channel window. A channel window can support up to 32 doorbells + and the entire window shall be used in doorbell protocol. Optionally, data + may be transmitted through a shared memory region, wherein the MHU is used + strictly as an interrupt generation mechanism but that is out of the scope + of these bindings. + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + enum: + - arm,mhuv2-tx + - arm,mhuv2-rx + required: + - compatible + +properties: + compatible: + oneOf: + - description: Sender mode + items: + - const: arm,mhuv2-tx + - const: arm,primecell + + - description: Receiver-mode + items: + - const: arm,mhuv2-rx + - const: arm,primecell + + reg: + maxItems: 1 + + interrupts: + description: | + The MHUv2 controller always implements an interrupt in the "receiver" + mode, while the interrupt in the "sender" mode was not available in the + version MHUv2.0, but the later versions do have it. + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + + arm,mhuv2-protocols: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + The MHUv2 controller may contain up to 124 channel windows (each 32-bit + wide). The hardware and the DT bindings allows any combination of those to + be used for various transport protocols. + + This property allows a platform to describe how these channel windows are + used in various transport protocols. The entries in this property shall be + present as an array of tuples, where each tuple describes details about + one of the transport protocol being implemented over some channel + window(s). + + The first field of a tuple signifies the transfer protocol, 0 is reserved + for doorbell protocol, and 1 is reserved for data-transfer protocol. + Using any other value in the first field of a tuple makes it invalid. + + The second field of a tuple signifies the number of channel windows where + the protocol would be used and should be set to a non zero value. For + doorbell protocol this field signifies the number of 32-bit channel + windows that implement the doorbell protocol. For data-transfer protocol, + this field signifies the number of 32-bit channel windows that implement + the data-transfer protocol. + + The total number of channel windows specified here shouldn't be more than + the ones implemented by the platform, though one can specify lesser number + of windows here than what the platform implements. + + mhu: mailbox@2b1f0000 { + ... + + arm,mhuv2-protocols = <0 2>, <1 1>, <1 5>, <1 7>; + } + + The above example defines the protocols of an ARM MHUv2 mailbox + controller, where a total of 15 channel windows are used. The first two + windows are used in doorbell protocol (64 doorbells), followed by 1, 5 and + 7 windows (separately) used in data-transfer protocol. + + minItems: 1 + maxItems: 124 + items: + items: + - enum: [ 0, 1 ] + - minimum: 0 + maximum: 124 + + '#mbox-cells': + description: | + It is always set to 2. The first argument in the consumers 'mboxes' + property represents the channel window group, which may be used in + doorbell, or data-transfer protocol, and the second argument (only + relevant in doorbell protocol, should be 0 otherwise) represents the + doorbell number within the 32 bit wide channel window. + + From the example given above for arm,mhuv2-protocols, here is how a client + node can reference them. + + mboxes = <&mhu 0 5>; // Channel Window Group 0, doorbell 5. + mboxes = <&mhu 1 7>; // Channel Window Group 1, doorbell 7. + mboxes = <&mhu 2 0>; // Channel Window Group 2, data transfer protocol with 1 window. + mboxes = <&mhu 3 0>; // Channel Window Group 3, data transfer protocol with 5 windows. + mboxes = <&mhu 4 0>; // Channel Window Group 4, data transfer protocol with 7 windows. + + const: 2 + +if: + # Interrupt is compulsory for receiver + properties: + compatible: + contains: + const: arm,mhuv2-rx +then: + required: + - interrupts + +required: + - compatible + - reg + - '#mbox-cells' + - arm,mhuv2-protocols + +additionalProperties: false + +examples: + # Multiple transport protocols implemented by the mailbox controllers + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + mhu_tx: mailbox@2b1f0000 { + #mbox-cells = <2>; + compatible = "arm,mhuv2-tx", "arm,primecell"; + reg = <0 0x2b1f0000 0 0x1000>; + clocks = <&clock 0>; + clock-names = "apb_pclk"; + interrupts = <0 45 4>; + arm,mhuv2-protocols = <1 5>, <1 2>, <1 5>, <1 7>, <0 2>; + }; + + mhu_rx: mailbox@2b1f1000 { + #mbox-cells = <2>; + compatible = "arm,mhuv2-rx", "arm,primecell"; + reg = <0 0x2b1f1000 0 0x1000>; + clocks = <&clock 0>; + clock-names = "apb_pclk"; + interrupts = <0 46 4>; + arm,mhuv2-protocols = <1 1>, <1 7>, <0 2>; + }; + + mhu_client: dsp@596e8000 { + compatible = "fsl,imx8qxp-dsp"; + reg = <0 0x596e8000 0 0x88000>; + clocks = <&adma_lpcg 0>, <&adma_lpcg 1>, <&adma_lpcg 2>; + clock-names = "ipg", "ocram", "core"; + power-domains = <&pd 0>, <&pd 1>; + mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1"; + mboxes = <&mhu_tx 2 0>, //data-transfer protocol with 5 windows, mhu-tx + <&mhu_tx 3 0>, //data-transfer protocol with 7 windows, mhu-tx + <&mhu_rx 2 27>, //doorbell protocol channel 2, doorbell 27, mhu-rx + <&mhu_rx 0 0>; //data-transfer protocol with 1 window, mhu-rx + memory-region = <&dsp_reserved>; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml new file mode 100644 index 000000000..449b55afe --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml @@ -0,0 +1,224 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/arm,mhuv3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM MHUv3 Mailbox Controller + +maintainers: + - Sudeep Holla <sudeep.holla@arm.com> + - Cristian Marussi <cristian.marussi@arm.com> + +description: | + The Arm Message Handling Unit (MHU) Version 3 is a mailbox controller that + enables unidirectional communications with remote processors through various + possible transport protocols. + The controller can optionally support a varying number of extensions that, in + turn, enable different kinds of transport to be used for communication. + Number, type and characteristics of each supported extension can be discovered + dynamically at runtime. + + Given the unidirectional nature of the controller, an MHUv3 mailbox controller + is composed of a MHU Sender (MHUS) containing a PostBox (PBX) block and a MHU + Receiver (MHUR) containing a MailBox (MBX) block, where + + PBX is used to + - Configure the MHU + - Send Transfers to the Receiver + - Optionally receive acknowledgment of a Transfer from the Receiver + + MBX is used to + - Configure the MHU + - Receive Transfers from the Sender + - Optionally acknowledge Transfers sent by the Sender + + Both PBX and MBX need to be present and defined in the DT description if you + need to establish a bidirectional communication, since you will have to + acquire two distinct unidirectional channels, one for each block. + + As a consequence both blocks needs to be represented separately and specified + as distinct DT nodes in order to properly describe their resources. + + Note that, though, thanks to the runtime discoverability, there is no need to + identify the type of blocks with distinct compatibles. + + Following are the MHUv3 possible extensions. + + - Doorbell Extension (DBE): DBE defines a type of channel called a Doorbell + Channel (DBCH). DBCH enables a single bit Transfer to be sent from the + Sender to Receiver. The Transfer indicates that an event has occurred. + When DBE is implemented, the number of DBCHs that an implementation of the + MHU can support is between 1 and 128, numbered starting from 0 in ascending + order and discoverable at run-time. + Each DBCH contains 32 individual fields, referred to as flags, each of which + can be used independently. It is possible for the Sender to send multiple + Transfers at once using a single DBCH, so long as each Transfer uses + a different flag in the DBCH. + Optionally, data may be transmitted through an out-of-band shared memory + region, wherein the MHU Doorbell is used strictly as an interrupt generation + mechanism, but this is out of the scope of these bindings. + + - FastChannel Extension (FCE): FCE defines a type of channel called a Fast + Channel (FCH). FCH is intended for lower overhead communication between + Sender and Receiver at the expense of determinism. An FCH allows the Sender + to update the channel value at any time, regardless of whether the previous + value has been seen by the Receiver. When the Receiver reads the channel's + content it gets the last value written to the channel. + FCH is considered lossy in nature, and means that the Sender has no way of + knowing if, or when, the Receiver will act on the Transfer. + FCHs are expected to behave as RAM which generates interrupts when writes + occur to the locations within the RAM. + When FCE is implemented, the number of FCHs that an implementation of the + MHU can support is between 1-1024, if the FastChannel word-size is 32-bits, + or between 1-512, when the FastChannel word-size is 64-bits. + FCHs are numbered from 0 in ascending order. + Note that the number of FCHs and the word-size are implementation defined, + not configurable but discoverable at run-time. + Optionally, data may be transmitted through an out-of-band shared memory + region, wherein the MHU FastChannel is used as an interrupt generation + mechanism which carries also a pointer to such out-of-band data, but this + is out of the scope of these bindings. + + - FIFO Extension (FE): FE defines a Channel type called a FIFO Channel (FFCH). + FFCH allows a Sender to send + - Multiple Transfers to the Receiver without having to wait for the + previous Transfer to be acknowledged by the Receiver, as long as the + FIFO has room for the Transfer. + - Transfers which require the Receiver to provide acknowledgment. + - Transfers which have in-band payload. + In all cases, the data is guaranteed to be observed by the Receiver in the + same order which the Sender sent it. + When FE is implemented, the number of FFCHs that an implementation of the + MHU can support is between 1 and 64, numbered starting from 0 in ascending + order. The number of FFCHs, their depth (same for all implemented FFCHs) and + the access-granularity are implementation defined, not configurable but + discoverable at run-time. + Optionally, additional data may be transmitted through an out-of-band shared + memory region, wherein the MHU FIFO is used to transmit, in order, a small + part of the payload (like a header) and a reference to the shared memory + area holding the remaining, bigger, chunk of the payload, but this is out of + the scope of these bindings. + +properties: + compatible: + const: arm,mhuv3 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 74 + + interrupt-names: + description: | + The MHUv3 controller generates a number of events some of which are used + to generate interrupts; as a consequence it can expose a varying number of + optional PBX/MBX interrupts, representing the events generated during the + operation of the various transport protocols associated with different + extensions. All interrupts of the MHU are level-sensitive. + Some of these optional interrupts are defined per-channel, where the + number of channels effectively available is implementation defined and + run-time discoverable. + In the following names are enumerated using patterns, with per-channel + interrupts implicitly capped at the maximum channels allowed by the + specification for each extension type. + For the sake of simplicity maxItems is anyway capped to a most plausible + number, assuming way less channels would be implemented than actually + possible. + + The only mandatory interrupts on the MHU are: + - combined + - mbx-fch-xfer-<N> but only if mbx-fcgrp-xfer-<N> is not implemented. + + minItems: 1 + maxItems: 74 + items: + oneOf: + - const: combined + description: PBX/MBX Combined interrupt + - const: combined-ffch + description: PBX/MBX FIFO Combined interrupt + - pattern: '^ffch-low-tide-[0-9]+$' + description: PBX/MBX FIFO Channel <N> Low Tide interrupt + - pattern: '^ffch-high-tide-[0-9]+$' + description: PBX/MBX FIFO Channel <N> High Tide interrupt + - pattern: '^ffch-flush-[0-9]+$' + description: PBX/MBX FIFO Channel <N> Flush interrupt + - pattern: '^mbx-dbch-xfer-[0-9]+$' + description: MBX Doorbell Channel <N> Transfer interrupt + - pattern: '^mbx-fch-xfer-[0-9]+$' + description: MBX FastChannel <N> Transfer interrupt + - pattern: '^mbx-fchgrp-xfer-[0-9]+$' + description: MBX FastChannel <N> Group Transfer interrupt + - pattern: '^mbx-ffch-xfer-[0-9]+$' + description: MBX FIFO Channel <N> Transfer interrupt + - pattern: '^pbx-dbch-xfer-ack-[0-9]+$' + description: PBX Doorbell Channel <N> Transfer Ack interrupt + - pattern: '^pbx-ffch-xfer-ack-[0-9]+$' + description: PBX FIFO Channel <N> Transfer Ack interrupt + + '#mbox-cells': + description: | + The first argument in the consumers 'mboxes' property represents the + extension type, the second is for the channel number while the third + depends on extension type. + + Extension types constants are defined in <dt-bindings/arm/mhuv3-dt.h>. + + Extension type for DBE is DBE_EXT and the third parameter represents the + doorbell flag number to use. + Extension type for FCE is FCE_EXT, third parameter unused. + Extension type for FE is FE_EXT, third parameter unused. + + mboxes = <&mhu DBE_EXT 0 5>; // DBE, Doorbell Channel Window 0, doorbell 5. + mboxes = <&mhu DBE_EXT 7>; // DBE, Doorbell Channel Window 1, doorbell 7. + mboxes = <&mhu FCE_EXT 0 0>; // FCE, FastChannel Window 0. + mboxes = <&mhu FCE_EXT 3 0>; // FCE, FastChannel Window 3. + mboxes = <&mhu FE_EXT 1 0>; // FE, FIFO Channel Window 1. + mboxes = <&mhu FE_EXT 7 0>; // FE, FIFO Channel Window 7. + const: 3 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - '#mbox-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + mailbox@2aaa0000 { + compatible = "arm,mhuv3"; + #mbox-cells = <3>; + reg = <0 0x2aaa0000 0 0x10000>; + clocks = <&clock 0>; + interrupt-names = "combined", "pbx-dbch-xfer-ack-1", + "ffch-high-tide-0"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + }; + + mailbox@2ab00000 { + compatible = "arm,mhuv3"; + #mbox-cells = <3>; + reg = <0 0x2aab0000 0 0x10000>; + clocks = <&clock 0>; + interrupt-names = "combined", "mbx-dbch-xfer-1", "ffch-low-tide-0"; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/aspeed,ast2700-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/aspeed,ast2700-mailbox.yaml new file mode 100644 index 000000000..600e2d63f --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/aspeed,ast2700-mailbox.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/aspeed,ast2700-mailbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED AST2700 mailbox controller + +maintainers: + - Jammy Huang <jammy_huang@aspeedtech.com> + +description: > + ASPEED AST2700 has multiple processors that need to communicate with each + other. The mailbox controller provides a way for these processors to send + messages to each other. It is a hardware-based inter-processor communication + mechanism that allows processors to send and receive messages through + dedicated channels. + + The mailbox's tx/rx are independent, meaning that one processor can send a + message while another processor is receiving a message simultaneously. + There are 4 channels available for both tx and rx operations. Each channel + has a FIFO buffer that can hold messages of a fixed size (32 bytes in this + case). + + The mailbox controller also supports interrupt generation, allowing + processors to notify each other when a message is available or when an event + occurs. + +properties: + compatible: + const: aspeed,ast2700-mailbox + + reg: + items: + - description: TX control register + - description: RX control register + + reg-names: + items: + - const: tx + - const: rx + + interrupts: + maxItems: 1 + + "#mbox-cells": + const: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mailbox@12c1c200 { + compatible = "aspeed,ast2700-mailbox"; + reg = <0x12c1c200 0x100>, <0x12c1c300 0x100>; + reg-names = "tx", "rx"; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.yaml b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.yaml new file mode 100644 index 000000000..9588817f4 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/brcm,bcm2835-mbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2835 VideoCore mailbox IPC + +maintainers: + - Stefan Wahren <stefan.wahren@i2se.com> + +properties: + compatible: + const: brcm,bcm2835-mbox + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#mbox-cells": + const: 0 + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + mailbox@7e00b880 { + compatible = "brcm,bcm2835-mbox"; + reg = <0x7e00b880 0x40>; + interrupts = <0 1>; + #mbox-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/brcm,bcm74110-mbox.yaml b/Documentation/devicetree/bindings/mailbox/brcm,bcm74110-mbox.yaml new file mode 100644 index 000000000..750cc96ed --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/brcm,bcm74110-mbox.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/brcm,bcm74110-mbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM74110 Mailbox + +maintainers: + - Justin Chen <justin.chen@broadcom.com> + - Florian Fainelli <florian.fainelli@broadcom.com> + +description: Broadcom mailbox hardware first introduced with 74110 + +properties: + compatible: + enum: + - brcm,bcm74110-mbox + + reg: + maxItems: 1 + + interrupts: + items: + - description: RX doorbell and watermark interrupts + - description: TX doorbell and watermark interrupts + + "#mbox-cells": + const: 2 + description: + The first cell is channel type and second cell is shared memory slot + + brcm,rx: + $ref: /schemas/types.yaml#/definitions/uint32 + description: RX Mailbox number + + brcm,tx: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TX Mailbox number + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + - brcm,rx + - brcm,tx + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mailbox@a552000 { + compatible = "brcm,bcm74110-mbox"; + reg = <0xa552000 0x1104>; + interrupts = <GIC_SPI 0x67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0x66 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <0x2>; + brcm,rx = <0x7>; + brcm,tx = <0x6>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.yaml b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.yaml new file mode 100644 index 000000000..c801bd2e9 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/brcm,iproc-flexrm-mbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom FlexRM Ring Manager + +maintainers: + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +description: + The Broadcom FlexRM ring manager provides a set of rings which can be used to + submit work to offload engines. An SoC may have multiple FlexRM hardware + blocks. There is one device tree entry per FlexRM block. The FlexRM driver + will create a mailbox-controller instance for given FlexRM hardware block + where each mailbox channel is a separate FlexRM ring. + +properties: + compatible: + const: brcm,iproc-flexrm-mbox + + reg: + maxItems: 1 + + msi-parent: + maxItems: 1 + + '#mbox-cells': + description: > + The 1st cell is the mailbox channel number. + + The 2nd cell contains MSI completion threshold. This is the number of + completion messages for which FlexRM will inject one MSI interrupt to CPU. + + The 3rd cell contains MSI timer value representing time for which FlexRM + will wait to accumulate N completion messages where N is the value + specified by 2nd cell above. If FlexRM does not get required number of + completion messages in time specified by this cell then it will inject one + MSI interrupt to CPU provided at least one completion message is + available. + const: 3 + + dma-coherent: true + +required: + - compatible + - reg + - msi-parent + - '#mbox-cells' + +additionalProperties: false + +examples: + - | + mailbox@67000000 { + compatible = "brcm,iproc-flexrm-mbox"; + reg = <0x67000000 0x200000>; + msi-parent = <&gic_its 0x7f00>; + #mbox-cells = <3>; + dma-coherent; + }; diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.yaml b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.yaml new file mode 100644 index 000000000..5534ae07c --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/brcm,iproc-pdc-mbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom iProc PDC mailbox + +maintainers: + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +description: + The PDC driver manages data transfer to and from various offload engines on + some Broadcom SoCs. An SoC may have multiple PDC hardware blocks. There is one + device tree entry per block. On some chips, the PDC functionality is handled + by the FA2 (Northstar Plus). + +properties: + compatible: + enum: + - brcm,iproc-pdc-mbox + - brcm,iproc-fa2-mbox + + reg: + maxItems: 1 + + dma-coherent: true + + interrupts: + maxItems: 1 + + '#mbox-cells': + const: 1 + + brcm,rx-status-len: + description: + Length of metadata preceding received frames, in bytes. + $ref: /schemas/types.yaml#/definitions/uint32 + + brcm,use-bcm-hdr: + type: boolean + description: + Present if a BCM header precedes each frame. + +required: + - compatible + - reg + - interrupts + - '#mbox-cells' + - brcm,rx-status-len + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mailbox0@612c0000 { + compatible = "brcm,iproc-pdc-mbox"; + reg = <0x612c0000 0x445>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + brcm,rx-status-len = <32>; + brcm,use-bcm-hdr; + }; diff --git a/Documentation/devicetree/bindings/mailbox/cix,sky1-mbox.yaml b/Documentation/devicetree/bindings/mailbox/cix,sky1-mbox.yaml new file mode 100644 index 000000000..66d75b7bc --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/cix,sky1-mbox.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/cix,sky1-mbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cixtech mailbox controller + +maintainers: + - Guomin Chen <Guomin.Chen@cixtech.com> + +description: + The Cixtech mailbox controller, used in the Cixtech Sky1 SoC, + is used for message transmission between multiple processors + within the SoC, such as the AP, PM, audio DSP, SensorHub MCU, + and others + + Each Cixtech mailbox controller is unidirectional, so they are + typically used in pairs-one for receiving and one for transmitting. + + Each Cixtech mailbox supports 11 channels with different transmission modes + channel 0-7 - Fast channel with 32bit transmit register and IRQ support + channel 8 - Doorbell mode,using the mailbox as an interrupt-generating + mechanism. + channel 9 - Fifo based channel with 32*32bit depth fifo and IRQ support + channel 10 - Reg based channel with 32*32bit transmit register and + Doorbell+transmit acknowledgment IRQ support + + In the CIX Sky1 SoC use case, there are 4 pairs of mailbox controllers + AP <--> PM - using Doorbell transfer mode + AP <--> SE - using REG transfer mode + AP <--> DSP - using FIFO transfer mode + AP <--> SensorHub - using FIFO transfer mode + +properties: + compatible: + const: cix,sky1-mbox + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#mbox-cells": + const: 1 + + cix,mbox-dir: + $ref: /schemas/types.yaml#/definitions/string + description: Direction of the mailbox relative to the AP + enum: [tx, rx] + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + - cix,mbox-dir + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + mbox_ap2pm: mailbox@30000000 { + compatible = "cix,sky1-mbox"; + reg = <0 0x30000000 0 0x10000>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH 0>; + #mbox-cells = <1>; + cix,mbox-dir = "tx"; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml new file mode 100644 index 000000000..581425aac --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml @@ -0,0 +1,197 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/fsl,mu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX Messaging Unit (MU) + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: | + The Messaging Unit module enables two processors within the SoC to + communicate and coordinate by passing messages (e.g. data, status + and control) through the MU interface. The MU also provides the ability + for one processor to signal the other processor using interrupts. + + Because the MU manages the messaging between processors, the MU uses + different clocks (from each side of the different peripheral buses). + Therefore, the MU must synchronize the accesses from one side to the + other. The MU accomplishes synchronization using two sets of matching + registers (Processor A-facing, Processor B-facing). + +properties: + compatible: + oneOf: + - const: fsl,imx6sx-mu + - const: fsl,imx7ulp-mu + - const: fsl,imx8ulp-mu + - const: fsl,imx8-mu-scu + - const: fsl,imx8-mu-seco + - const: fsl,imx8ulp-mu-s4 + - const: fsl,imx93-mu-s4 + - const: fsl,imx95-mu + - const: fsl,imx95-mu-ele + - const: fsl,imx95-mu-v2x + - items: + - const: fsl,imx93-mu + - const: fsl,imx8ulp-mu + - items: + - enum: + - fsl,imx7s-mu + - fsl,imx8mq-mu + - fsl,imx8mm-mu + - fsl,imx8mn-mu + - fsl,imx8mp-mu + - fsl,imx8qm-mu + - fsl,imx8qxp-mu + - const: fsl,imx6sx-mu + - description: To communicate with i.MX8 SCU with fast IPC + items: + - const: fsl,imx8-mu-scu + - enum: + - fsl,imx8qm-mu + - fsl,imx8qxp-mu + - const: fsl,imx6sx-mu + - items: + - enum: + - fsl,imx94-mu + - const: fsl,imx95-mu + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + items: + - const: tx + - const: rx + + "#mbox-cells": + description: | + <&phandle type channel> + phandle : Label name of controller + type : Channel type + channel : Channel number + + This MU support 6 type of unidirectional channels, each type + has 4 channels except RST channel which only has 1 channel. + A total of 21 channels. Following types are + supported: + 0 - TX channel with 32bit transmit register and IRQ transmit + acknowledgment support. + 1 - RX channel with 32bit receive register and IRQ support + 2 - TX doorbell channel. Without own register and no ACK support. + 3 - RX doorbell channel. + 4 - RST channel + 5 - Tx doorbell channel. With S/W ACK from the other side. + const: 2 + + clocks: + maxItems: 1 + + fsl,mu-side-b: + description: boolean, if present, means it is for side B MU. + type: boolean + + power-domains: + maxItems: 1 + + ranges: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + +patternProperties: + "^sram@[a-f0-9]+": + $ref: /schemas/sram/sram.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + +allOf: + - if: + properties: + compatible: + enum: + - fsl,imx93-mu-s4 + then: + properties: + interrupt-names: + minItems: 2 + interrupts: + minItems: 2 + + else: + properties: + interrupts: + maxItems: 1 + not: + required: + - interrupt-names + + - if: + not: + properties: + compatible: + contains: + const: fsl,imx95-mu + then: + patternProperties: + "^sram@[a-f0-9]+": false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mailbox@5d1b0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1b0000 0x10000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mailbox@445b0000 { + compatible = "fsl,imx95-mu"; + reg = <0x445b0000 0x10000>; + ranges; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + #mbox-cells = <2>; + + sram@445b1000 { + compatible = "mmio-sram"; + reg = <0x445b1000 0x400>; + ranges = <0x0 0x445b1000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + scmi-sram-section@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x80>; + }; + + scmi-sram-section@80 { + compatible = "arm,scmi-shmem"; + reg = <0x80 0x80>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/google,gs101-mbox.yaml b/Documentation/devicetree/bindings/mailbox/google,gs101-mbox.yaml new file mode 100644 index 000000000..e249db4c1 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/google,gs101-mbox.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2024 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/google,gs101-mbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos Mailbox Controller + +maintainers: + - Tudor Ambarus <tudor.ambarus@linaro.org> + +description: + The Samsung Exynos mailbox controller, used on Google GS101 SoC, has 16 flag + bits for hardware interrupt generation and a shared register for passing + mailbox messages. When the controller is used by the ACPM interface + the shared register is ignored and the mailbox controller acts as a doorbell. + The controller just raises the interrupt to the firmware after the + ACPM interface has written the message to SRAM. + +properties: + compatible: + const: google,gs101-mbox + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: pclk + + interrupts: + description: IRQ line for the RX mailbox. + maxItems: 1 + + '#mbox-cells': + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - '#mbox-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/google,gs101.h> + + soc { + #address-cells = <1>; + #size-cells = <1>; + + ap2apm_mailbox: mailbox@17610000 { + compatible = "google,gs101-mbox"; + reg = <0x17610000 0x1000>; + clocks = <&cmu_apm CLK_GOUT_APM_MAILBOX_APM_AP_PCLK>; + clock-names = "pclk"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH 0>; + #mbox-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt b/Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt new file mode 100644 index 000000000..3e5b45374 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt @@ -0,0 +1,51 @@ +Hisilicon Hi3660 Mailbox Controller + +Hisilicon Hi3660 mailbox controller supports up to 32 channels. Messages +are passed between processors, including application & communication +processors, MCU, HIFI, etc. Each channel is unidirectional and accessed +by using MMIO registers; it supports maximum to 8 words message. + +Controller +---------- + +Required properties: +- compatible: : Shall be "hisilicon,hi3660-mbox" +- reg: : Offset and length of the device's register set +- #mbox-cells: : Must be 3 + <&phandle channel dst_irq ack_irq> + phandle : Label name of controller + channel : Channel number + dst_irq : Remote interrupt vector + ack_irq : Local interrupt vector + +- interrupts: : Contains the two IRQ lines for mailbox. + +Example: + +mailbox: mailbox@e896b000 { + compatible = "hisilicon,hi3660-mbox"; + reg = <0x0 0xe896b000 0x0 0x1000>; + interrupts = <0x0 0xc0 0x4>, + <0x0 0xc1 0x4>; + #mbox-cells = <3>; +}; + +Client +------ + +Required properties: +- compatible : See the client docs +- mboxes : Standard property to specify a Mailbox (See ./mailbox.txt) + Cells must match 'mbox-cells' (See Controller docs above) + +Optional properties +- mbox-names : Name given to channels seen in the 'mboxes' property. + +Example: + +stub_clock: stub_clock@e896b500 { + compatible = "hisilicon,hi3660-stub-clk"; + reg = <0x0 0xe896b500 0x0 0x0100>; + #clock-cells = <1>; + mboxes = <&mailbox 13 3 0>; +}; diff --git a/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt b/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt new file mode 100644 index 000000000..044b17f3a --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt @@ -0,0 +1,74 @@ +Hisilicon Hi6220 Mailbox Driver +=============================== + +Hisilicon Hi6220 mailbox supports up to 32 channels. Each channel +is unidirectional with a maximum message size of 8 words. I/O is +performed using register access (there is no DMA) and the cell +raises an interrupt when messages are received. + +Mailbox Device Node: +==================== + +Required properties: +-------------------- +- compatible: Shall be "hisilicon,hi6220-mbox" +- reg: Contains the mailbox register address range (base + address and length); the first item is for IPC + registers, the second item is shared buffer for + slots. +- #mbox-cells: Common mailbox binding property to identify the number + of cells required for the mailbox specifier. Must be 3. + <&phandle slot_id dst_irq ack_irq> + phandle: Label name of mailbox controller + slot_id: Slot id used either for TX or RX + dst_irq: IRQ identifier index number which used by MCU + ack_irq: IRQ identifier index number with generating a + TX/RX interrupt to application processor, + mailbox driver uses it to acknowledge interrupt +- interrupts: Contains the interrupt information for the mailbox + device. The format is dependent on which interrupt + controller the SoCs use. + +Optional Properties: +-------------------- +- hi6220,mbox-tx-noirq: Property of MCU firmware's feature, so mailbox driver + use this flag to ask MCU to enable "automatic idle + flag" mode or IRQ generated mode to acknowledge a TX + completion. + +Example: +-------- + + mailbox: mailbox@f7510000 { + compatible = "hisilicon,hi6220-mbox"; + reg = <0x0 0xf7510000 0x0 0x1000>, /* IPC_S */ + <0x0 0x06dff800 0x0 0x0800>; /* Mailbox */ + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <3>; + }; + + +Mailbox client +=============== + +Required properties: +-------------------- +- compatible: Many (See the client docs). +- mboxes: Standard property to specify a Mailbox (See ./mailbox.txt) + Cells must match 'mbox-cells' (See Mailbox Device Node above). + +Optional Properties: +-------------------- +- mbox-names: Name given to channels seen in the 'mboxes' property. + +Example: +-------- + + stub_clock: stub_clock { + compatible = "hisilicon,hi6220-stub-clk"; + hisilicon,hi6220-clk-sram = <&sram>; + #clock-cells = <1>; + mbox-names = "mbox-tx", "mbox-rx"; + mboxes = <&mailbox 1 0 11>, <&mailbox 0 1 10>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/mailbox.txt b/Documentation/devicetree/bindings/mailbox/mailbox.txt new file mode 100644 index 000000000..af8ecee2a --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/mailbox.txt @@ -0,0 +1,60 @@ +* Generic Mailbox Controller and client driver bindings + +Generic binding to provide a way for Mailbox controller drivers to +assign appropriate mailbox channel to client drivers. + +* Mailbox Controller + +Required property: +- #mbox-cells: Must be at least 1. Number of cells in a mailbox + specifier. + +Example: + mailbox: mailbox { + ... + #mbox-cells = <1>; + }; + + +* Mailbox Client + +Required property: +- mboxes: List of phandle and mailbox channel specifiers. + +Optional property: +- mbox-names: List of identifier strings for each mailbox channel. +- shmem : List of phandle pointing to the shared memory(SHM) area between the + users of these mailboxes for IPC, one for each mailbox. This shared + memory can be part of any memory reserved for the purpose of this + communication between the mailbox client and the remote. + + +Example: + pwr_cntrl: power { + ... + mbox-names = "pwr-ctrl", "rpc"; + mboxes = <&mailbox 0 &mailbox 1>; + }; + +Example with shared memory(shmem): + + sram: sram@50000000 { + compatible = "mmio-sram"; + reg = <0x50000000 0x10000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x50000000 0x10000>; + + cl_shmem: shmem@0 { + compatible = "client-shmem"; + reg = <0x0 0x200>; + }; + }; + + client@2e000000 { + ... + mboxes = <&mailbox 0>; + shmem = <&cl_shmem>; + .. + }; diff --git a/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.yaml new file mode 100644 index 000000000..0a07ed1b1 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/marvell,armada-3700-rwtm-mailbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada 3700 rWTM Mailbox + +maintainers: + - Marek Behún <kabel@kernel.org> + +properties: + compatible: + const: marvell,armada-3700-rwtm-mailbox + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#mbox-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#mbox-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mailbox@b0000 { + compatible = "marvell,armada-3700-rwtm-mailbox"; + reg = <0xb0000 0x100>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml new file mode 100644 index 000000000..587126d03 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/mediatek,gce-mailbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Global Command Engine Mailbox + +maintainers: + - Houlong Wei <houlong.wei@mediatek.com> + +description: + The Global Command Engine (GCE) is used to help read/write registers with + critical time limitation, such as updating display configuration during the + vblank. The GCE can be used to implement the Command Queue (CMDQ) driver. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt6779-gce + - mediatek,mt8173-gce + - mediatek,mt8183-gce + - mediatek,mt8186-gce + - mediatek,mt8188-gce + - mediatek,mt8192-gce + - mediatek,mt8195-gce + - mediatek,mt8196-gce + - items: + - const: mediatek,mt6795-gce + - const: mediatek,mt8173-gce + + "#mbox-cells": + const: 2 + description: + The first cell describes the Thread ID of the GCE, + the second cell describes the priority of the GCE thread + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Global Command Engine clock + + clock-names: + items: + - const: gce + + iommus: + maxItems: 1 + +required: + - compatible + - "#mbox-cells" + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + gce: mailbox@10212000 { + compatible = "mediatek,mt8173-gce"; + reg = <0 0x10212000 0 0x1000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>; + #mbox-cells = <2>; + clocks = <&infracfg CLK_INFRA_GCE>; + clock-names = "gce"; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml b/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml new file mode 100644 index 000000000..c25eed460 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/mediatek,gce-props.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Global Command Engine Common Properties + +maintainers: + - Houlong Wei <houlong.wei@mediatek.com> + +description: + The Global Command Engine (GCE) is an instruction based, multi-threaded, + single-core command dispatcher for MediaTek hardware. The Command Queue + (CMDQ) mailbox driver is a driver for GCE, implemented using the Linux + mailbox framework. It is used to receive messages from mailbox consumers + and configure GCE to execute the specified instruction set in the message. + We use mediatek,gce-mailbox.yaml to define the properties for CMDQ mailbox + driver. A device driver that uses the CMDQ driver to configure its hardware + registers is a mailbox consumer. The mailbox consumer can request a mailbox + channel corresponding to a GCE hardware thread to send a message, specifying + that the GCE thread to configure its hardware. The mailbox provider can also + reserve a mailbox channel to configure GCE hardware register by the specific + GCE thread. This binding defines the common GCE properties for both mailbox + provider and consumers. + +properties: + mediatek,gce-events: + description: + GCE has an event table in SRAM, consisting of 1024 event IDs (0~1023). + Each event ID has a boolean event value with the default value 0. + The property mediatek,gce-events is used to obtain the event IDs. + Some gce-events are hardware-bound and cannot be changed by software. + For instance, in MT8195, when VDO0_MUTEX is stream done, VDO_MUTEX will + send an event signal to GCE, setting the value of event ID 597 to 1. + Similarly, in MT8188, the value of event ID 574 will be set to 1 when + VOD0_MUTEX is stream done. + On the other hand, some gce-events are not hardware-bound and can be + changed by software. For example, in MT8188, we can set the value of + event ID 855, which is not bound to any hardware, to 1 when the driver + in the secure world completes a task. However, in MT8195, event ID 855 + is already bound to VDEC_LAT1, so we need to select another event ID to + achieve the same purpose. This event ID can be any ID that is not bound + to any hardware and is not yet used in any software driver. + To determine if the event ID is bound to the hardware or used by a + software driver, refer to the GCE header + include/dt-bindings/gce/<chip>-gce.h of each chip. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 32 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/mailbox/mediatek,mt8196-gpueb-mbox.yaml b/Documentation/devicetree/bindings/mailbox/mediatek,mt8196-gpueb-mbox.yaml new file mode 100644 index 000000000..ab5b780cb --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/mediatek,mt8196-gpueb-mbox.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/mediatek,mt8196-gpueb-mbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MFlexGraphics GPUEB Mailbox Controller + +maintainers: + - Nicolas Frattaroli <nicolas.frattaroli@collabora.com> + +properties: + compatible: + enum: + - mediatek,mt8196-gpueb-mbox + + reg: + items: + - description: mailbox data registers + - description: mailbox control registers + + reg-names: + items: + - const: data + - const: ctl + + clocks: + items: + - description: main clock of the GPUEB MCU + + interrupts: + items: + - description: fires when a new message is received + + "#mbox-cells": + const: 1 + description: + The number of the mailbox channel. + +required: + - compatible + - reg + - reg-names + - clocks + - interrupts + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mediatek,mt8196-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + mailbox@4b09fd80 { + compatible = "mediatek,mt8196-gpueb-mbox"; + reg = <0x4b09fd80 0x280>, + <0x4b170000 0x7c>; + reg-names = "data", "ctl"; + clocks = <&topckgen CLK_TOP_MFG_EB>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH 0>; + #mbox-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/mediatek,mt8196-vcp-mbox.yaml b/Documentation/devicetree/bindings/mailbox/mediatek,mt8196-vcp-mbox.yaml new file mode 100644 index 000000000..7b1c5165e --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/mediatek,mt8196-vcp-mbox.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/mediatek,mt8196-vcp-mbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Video Companion Processor (VCP) mailbox + +maintainers: + - Jjian Zhou <Jjian.Zhou@mediatek.com> + +description: + The MTK VCP mailbox enables the SoC to communicate with the VCP by passing + messages through 64 32-bit wide registers. It has 32 interrupt vectors in + either direction for signalling purposes. + +properties: + compatible: + enum: + - mediatek,mt8196-vcp-mbox + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#mbox-cells": + const: 0 + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + mailbox@31b80000 { + compatible = "mediatek,mt8196-vcp-mbox"; + reg = <0x31b80000 0x1000>; + interrupts = <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH 0>; + #mbox-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml new file mode 100644 index 000000000..5f2ec74c1 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/microchip,mpfs-mailbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) mailbox controller + +maintainers: + - Conor Dooley <conor.dooley@microchip.com> + +properties: + compatible: + oneOf: + - items: + - const: microchip,pic64gx-mailbox + - const: microchip,mpfs-mailbox + - const: microchip,mpfs-mailbox + + reg: + oneOf: + - items: + - description: mailbox data registers + - items: + - description: mailbox control & data registers + - description: mailbox interrupt registers + deprecated: true + - items: + - description: mailbox control registers + - description: mailbox interrupt registers + - description: mailbox data registers + deprecated: true + + interrupts: + maxItems: 1 + + "#mbox-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <1>; + #size-cells = <1>; + + mailbox@37020800 { + compatible = "microchip,mpfs-mailbox"; + reg = <0x37020800 0x100>; + interrupt-parent = <&L1>; + interrupts = <96>; + #mbox-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/microchip,sbi-ipc.yaml b/Documentation/devicetree/bindings/mailbox/microchip,sbi-ipc.yaml new file mode 100644 index 000000000..8ed67ea7c --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/microchip,sbi-ipc.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/microchip,sbi-ipc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Inter-processor communication (IPC) mailbox controller + +maintainers: + - Valentina Fernandez <valentina.fernandezalanis@microchip.com> + +description: + The Microchip Inter-processor Communication (IPC) facilitates + message passing between processors using an interrupt signaling + mechanism. + +properties: + compatible: + oneOf: + - description: + Intended for use by software running in supervisor privileged + mode (s-mode). This SBI interface is compatible with the Mi-V + Inter-hart Communication (IHC) IP. + const: microchip,sbi-ipc + + - description: + Intended for use by the SBI implementation in machine mode + (m-mode), this compatible string is for the MIV_IHC Soft-IP. + const: microchip,miv-ihc-rtl-v2 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 5 + + interrupt-names: + minItems: 1 + maxItems: 5 + items: + enum: + - hart-0 + - hart-1 + - hart-2 + - hart-3 + - hart-4 + - hart-5 + + "#mbox-cells": + description: > + For "microchip,sbi-ipc", the cell represents the global "logical" + channel IDs. The meaning of channel IDs are platform firmware dependent. + + For "microchip,miv-ihc-rtl-v2", the cell represents the physical + channel and does not vary based on the platform firmware. + const: 1 + + microchip,ihc-chan-disabled-mask: + description: > + Represents the enable/disable state of the bi-directional IHC + channels within the MIV-IHC IP configuration. + + A bit set to '1' indicates that the corresponding channel is disabled, + and any read or write operations to that channel will return zero. + + A bit set to '0' indicates that the corresponding channel is enabled + and will be accessible through its dedicated address range registers. + + The actual enable/disable state of each channel is determined by the + IP block’s configuration. + $ref: /schemas/types.yaml#/definitions/uint16 + maximum: 0x7fff + default: 0 + +required: + - compatible + - interrupts + - interrupt-names + - "#mbox-cells" + +allOf: + - if: + properties: + compatible: + contains: + const: microchip,sbi-ipc + then: + properties: + reg: + not: {} + description: + The 'microchip,sbi-ipc' operates in a programming model + that does not require memory-mapped I/O (MMIO) registers + since it uses SBI ecalls provided by the m-mode/firmware + SBI implementation to access hardware registers. + microchip,ihc-chan-disabled-mask: false + else: + required: + - reg + - microchip,ihc-chan-disabled-mask + +additionalProperties: false + +examples: + - | + mailbox { + compatible = "microchip,sbi-ipc"; + interrupt-parent = <&plic>; + interrupts = <180>, <179>, <178>; + interrupt-names = "hart-1", "hart-2", "hart-3"; + #mbox-cells = <1>; + }; + - | + mailbox@50000000 { + compatible = "microchip,miv-ihc-rtl-v2"; + microchip,ihc-chan-disabled-mask = /bits/ 16 <0>; + reg = <0x50000000 0x1c000>; + interrupt-parent = <&plic>; + interrupts = <180>, <179>, <178>; + interrupt-names = "hart-1", "hart-2", "hart-3"; + #mbox-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml new file mode 100644 index 000000000..4ca0d5e49 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/mtk,adsp-mbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek ADSP mailbox + +maintainers: + - Allen-KH Cheng <Allen-KH.Cheng@mediatek.com> + +description: | + The MTK ADSP mailbox Inter-Processor Communication (IPC) enables the SoC + to communicate with ADSP by passing messages through two mailbox channels. + The MTK ADSP mailbox IPC also provides the ability for one processor to + signal the other processor using interrupts. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt8186-adsp-mbox + - mediatek,mt8195-adsp-mbox + - items: + - enum: + - mediatek,mt8188-adsp-mbox + - const: mediatek,mt8186-adsp-mbox + + "#mbox-cells": + const: 0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - "#mbox-cells" + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + adsp_mailbox0:mailbox@10816000 { + compatible = "mediatek,mt8195-adsp-mbox"; + #mbox-cells = <0>; + reg = <0x10816000 0x1000>; + interrupts = <GIC_SPI 702 IRQ_TYPE_LEVEL_HIGH 0>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml new file mode 100644 index 000000000..f833b845d --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/nvidia,tegra186-hsp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Hardware Synchronization Primitives (HSP) + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: | + The HSP modules are used for the processors to share resources and + communicate together. It provides a set of hardware synchronization + primitives for interprocessor communication. So the interprocessor + communication (IPC) protocols can use hardware synchronization + primitives, when operating between two processors not in an SMP + relationship. + + The features that HSP supported are shared mailboxes, shared + semaphores, arbitrated semaphores and doorbells. + + The mbox specifier of the "mboxes" property in the client node should + contain two cells. The first cell determines the HSP type and the + second cell is used to identify the mailbox that the client is going + to use. + + For shared mailboxes, the first cell composed of two fields: + - bits 15..8: + A bit mask of flags that further specifies the type of shared + mailbox to be used (based on the data size). If no flag is + specified then, 32-bit shared mailbox is used. + - bits 7..0: + Defines the type of the mailbox to be used. This field should be + TEGRA_HSP_MBOX_TYPE_SM for shared mailboxes. + + For doorbells, the second cell specifies the index of the doorbell to + use. + + For shared mailboxes, the second cell is composed of two fields: + - bits 31..24: + A bit mask of flags that further specify how the shared mailbox + will be used. Valid flags are: + - bit 31: + Defines the direction of the mailbox. If set, the mailbox + will be used as a producer (i.e. used to send data). If + cleared, the mailbox is the consumer of data sent by a + producer. + + - bits 23..0: + The index of the shared mailbox to use. The number of available + mailboxes may vary by instance of the HSP block and SoC + generation. + + The following file contains definitions that can be used to + construct mailbox specifiers: + + <dt-bindings/mailbox/tegra186-hsp.h> + +properties: + compatible: + oneOf: + - enum: + - nvidia,tegra186-hsp + - nvidia,tegra194-hsp + - nvidia,tegra264-hsp + - items: + - const: nvidia,tegra234-hsp + - const: nvidia,tegra194-hsp + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 17 + + interrupt-names: + oneOf: + # shared interrupts are optional + - items: + - const: doorbell + + - items: + - const: doorbell + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + - pattern: "^shared([0-9]|1[0-5])$" + + - items: + - const: doorbell + - pattern: "^shared[0-7]$" + - pattern: "^shared[0-7]$" + - pattern: "^shared[0-7]$" + - pattern: "^shared[0-7]$" + - pattern: "^shared[0-7]$" + - pattern: "^shared[0-7]$" + - pattern: "^shared[0-7]$" + - pattern: "^shared[0-7]$" + + - items: + - pattern: "^shared[0-7]$" + - pattern: "^shared[0-7]$" + - pattern: "^shared[0-7]$" + - pattern: "^shared[0-7]$" + + "#mbox-cells": + const: 2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/mailbox/tegra186-hsp.h> + + mailbox@3c00000 { + compatible = "nvidia,tegra186-hsp"; + reg = <0x03c00000 0xa0000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "doorbell"; + #mbox-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml new file mode 100644 index 000000000..f40dc9048 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml @@ -0,0 +1,291 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/qcom,apcs-kpss-global.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm APCS global block + +description: + This binding describes the APCS "global" block found in various Qualcomm + platforms. + +maintainers: + - Jassi Brar <jassisinghbrar@gmail.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,ipq5018-apcs-apps-global + - qcom,ipq5332-apcs-apps-global + - qcom,ipq5424-apcs-apps-global + - qcom,ipq8074-apcs-apps-global + - qcom,ipq9574-apcs-apps-global + - const: qcom,ipq6018-apcs-apps-global + - items: + - enum: + - qcom,msm8226-apcs-kpss-global + - qcom,qcs404-apcs-apps-global + - const: qcom,msm8916-apcs-kpss-global + - const: syscon + - items: + - enum: + - qcom,msm8974-apcs-kpss-global + - qcom,msm8976-apcs-kpss-global + - const: qcom,msm8994-apcs-kpss-global + - const: syscon + - items: + - enum: + - qcom,msm8998-apcs-hmss-global + - qcom,sdm660-apcs-hmss-global + - qcom,sm4250-apcs-hmss-global + - qcom,sm6115-apcs-hmss-global + - qcom,sm6125-apcs-hmss-global + - const: qcom,msm8994-apcs-kpss-global + - items: + - enum: + - qcom,qcs615-apss-shared + - qcom,sc7180-apss-shared + - qcom,sc8180x-apss-shared + - qcom,sm7150-apss-shared + - qcom,sm8150-apss-shared + - const: qcom,sdm845-apss-shared + - items: + - enum: + - qcom,msm8916-apcs-kpss-global + - qcom,msm8939-apcs-kpss-global + - qcom,msm8953-apcs-kpss-global + - qcom,msm8994-apcs-kpss-global + - qcom,sdx55-apcs-gcc + - const: syscon + - enum: + - qcom,ipq6018-apcs-apps-global + - qcom,msm8996-apcs-hmss-global + - qcom,qcm2290-apcs-hmss-global + - qcom,sdm845-apss-shared + + reg: + maxItems: 1 + + clocks: + description: phandles to the parent clocks of the clock driver + minItems: 2 + maxItems: 3 + deprecated: true + + '#mbox-cells': + const: 1 + + '#clock-cells': + enum: [0, 1] + + clock-names: + minItems: 2 + maxItems: 3 + deprecated: true + + clock-controller: + type: object + additionalProperties: false + properties: + clocks: + description: phandles to the parent clocks of the clock driver + minItems: 2 + maxItems: 3 + + '#clock-cells': + enum: [0, 1] + + clock-names: + minItems: 2 + maxItems: 3 + +required: + - compatible + - reg + - '#mbox-cells' + +additionalProperties: false + +# Clocks should be specified either on the parent node or on the child node +oneOf: + - required: + - clock-controller + properties: + clocks: false + clock-names: false + '#clock-cells': false + - properties: + clock-controller: false + +$defs: + msm8916-apcs-clock-controller: + properties: + clocks: + items: + - description: primary pll parent of the clock driver + - description: auxiliary parent + clock-names: + items: + - const: pll + - const: aux + '#clock-cells': + const: 0 + + msm8939-apcs-clock-controller: + properties: + clocks: + items: + - description: primary pll parent of the clock driver + - description: auxiliary parent + - description: reference clock + clock-names: + items: + - const: pll + - const: aux + - const: ref + '#clock-cells': + const: 0 + + sdx55-apcs-clock-controller: + properties: + clocks: + items: + - description: reference clock + - description: primary pll parent of the clock driver + - description: auxiliary parent + clock-names: + items: + - const: ref + - const: pll + - const: aux + '#clock-cells': + const: 0 + + ipq6018-apcs-clock-controller: + properties: + clocks: + items: + - description: primary pll parent of the clock driver + - description: XO clock + - description: GCC GPLL0 clock source + clock-names: + items: + - const: pll + - const: xo + - const: gpll0 + '#clock-cells': + const: 1 + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8916-apcs-kpss-global + then: + $ref: '#/$defs/msm8916-apcs-clock-controller' + properties: + clock-controller: + $ref: '#/$defs/msm8916-apcs-clock-controller' + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8939-apcs-kpss-global + then: + $ref: '#/$defs/msm8939-apcs-clock-controller' + properties: + clock-controller: + $ref: '#/$defs/msm8939-apcs-clock-controller' + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdx55-apcs-gcc + then: + $ref: '#/$defs/sdx55-apcs-clock-controller' + properties: + clock-controller: + $ref: '#/$defs/sdx55-apcs-clock-controller' + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq6018-apcs-apps-global + then: + $ref: '#/$defs/ipq6018-apcs-clock-controller' + properties: + clock-controller: + $ref: '#/$defs/ipq6018-apcs-clock-controller' + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8953-apcs-kpss-global + - qcom,msm8994-apcs-kpss-global + - qcom,msm8996-apcs-hmss-global + - qcom,qcm2290-apcs-hmss-global + - qcom,sdm845-apss-shared + then: + properties: + clocks: false + clock-names: false + clock-controller: false + '#clock-cells': + const: 0 + +examples: + + # Example apcs with msm8996 + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + mailbox@9820000 { + compatible = "qcom,msm8996-apcs-hmss-global"; + reg = <0x9820000 0x1000>; + + #mbox-cells = <1>; + #clock-cells = <0>; + }; + + # Example apcs with qcs404 + - | + #define GCC_APSS_AHB_CLK_SRC 1 + #define GCC_GPLL0_AO_OUT_MAIN 123 + mailbox@b011000 { + compatible = "qcom,qcs404-apcs-apps-global", + "qcom,msm8916-apcs-kpss-global", "syscon"; + reg = <0x0b011000 0x1000>; + #mbox-cells = <1>; + + apcs_clk: clock-controller { + clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>; + clock-names = "pll", "aux"; + #clock-cells = <0>; + }; + }; + + # Example apcs with qcs404 (deprecated: use clock-controller subnode) + - | + #define GCC_APSS_AHB_CLK_SRC 1 + #define GCC_GPLL0_AO_OUT_MAIN 123 + apcs: mailbox@b011000 { + compatible = "qcom,qcs404-apcs-apps-global", + "qcom,msm8916-apcs-kpss-global", "syscon"; + reg = <0x0b011000 0x1000>; + #mbox-cells = <1>; + clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>; + clock-names = "pll", "aux"; + #clock-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/qcom,cpucp-mbox.yaml b/Documentation/devicetree/bindings/mailbox/qcom,cpucp-mbox.yaml new file mode 100644 index 000000000..90bfde66c --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/qcom,cpucp-mbox.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/qcom,cpucp-mbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. CPUCP Mailbox Controller + +maintainers: + - Sibi Sankar <quic_sibis@quicinc.com> + +description: + The CPUSS Control Processor (CPUCP) mailbox controller enables communication + between AP and CPUCP by acting as a doorbell between them. + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,glymur-cpucp-mbox + - qcom,kaanapali-cpucp-mbox + - qcom,sm8750-cpucp-mbox + - const: qcom,x1e80100-cpucp-mbox + - enum: + - qcom,x1e80100-cpucp-mbox + + reg: + items: + - description: CPUCP rx register region + - description: CPUCP tx register region + + interrupts: + maxItems: 1 + + "#mbox-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mailbox@17430000 { + compatible = "qcom,x1e80100-cpucp-mbox"; + reg = <0x17430000 0x10000>, <0x18830000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml new file mode 100644 index 000000000..7c4d61704 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/qcom-ipcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. Inter-Processor Communication Controller + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + The Inter-Processor Communication Controller (IPCC) is a centralized hardware + to route interrupts across various subsystems. It involves a three-level + addressing scheme called protocol, client and signal. For example, consider an + entity on the Application Processor Subsystem (APSS) that wants to listen to + Modem's interrupts via Shared Memory Point to Point (SMP2P) interface. In such + a case, the client would be Modem (client-id is 2) and the signal would be + SMP2P (signal-id is 2). The SMP2P itself falls under the Multiprocessor (MPROC) + protocol (protocol-id is 0). Refer include/dt-bindings/mailbox/qcom-ipcc.h + for the list of such IDs. + +properties: + compatible: + items: + - enum: + - qcom,glymur-ipcc + - qcom,kaanapali-ipcc + - qcom,milos-ipcc + - qcom,qcs8300-ipcc + - qcom,qdu1000-ipcc + - qcom,sa8255p-ipcc + - qcom,sa8775p-ipcc + - qcom,sar2130p-ipcc + - qcom,sc7280-ipcc + - qcom,sc8280xp-ipcc + - qcom,sdx75-ipcc + - qcom,sm6350-ipcc + - qcom,sm6375-ipcc + - qcom,sm8250-ipcc + - qcom,sm8350-ipcc + - qcom,sm8450-ipcc + - qcom,sm8550-ipcc + - qcom,sm8650-ipcc + - qcom,sm8750-ipcc + - qcom,x1e80100-ipcc + - const: qcom,ipcc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 3 + description: + The first cell is the client-id, the second cell is the signal-id and the + third cell is the interrupt type. + + "#mbox-cells": + const: 2 + description: + The first cell is the client-id, and the second cell is the signal-id. + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/mailbox/qcom-ipcc.h> + + mailbox@408000 { + compatible = "qcom,sm8250-ipcc", "qcom,ipcc"; + reg = <0x408000 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/riscv,rpmi-shmem-mbox.yaml b/Documentation/devicetree/bindings/mailbox/riscv,rpmi-shmem-mbox.yaml new file mode 100644 index 000000000..3aabc52a0 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/riscv,rpmi-shmem-mbox.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/riscv,rpmi-shmem-mbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Platform Management Interface (RPMI) shared memory mailbox + +maintainers: + - Anup Patel <anup@brainfault.org> + +description: | + The RISC-V Platform Management Interface (RPMI) [1] defines a common shared + memory based RPMI transport. This RPMI shared memory transport integrates as + mailbox controller in the SBI implementation or supervisor software whereas + each RPMI service group is mailbox client in the SBI implementation and + supervisor software. + + =========================================== + References + =========================================== + + [1] RISC-V Platform Management Interface (RPMI) v1.0 (or higher) + https://github.com/riscv-non-isa/riscv-rpmi/releases + +properties: + compatible: + const: riscv,rpmi-shmem-mbox + + reg: + minItems: 2 + items: + - description: A2P request queue base address + - description: P2A acknowledgment queue base address + - description: P2A request queue base address + - description: A2P acknowledgment queue base address + - description: A2P doorbell address + + reg-names: + minItems: 2 + items: + - const: a2p-req + - const: p2a-ack + - enum: [ p2a-req, a2p-doorbell ] + - const: a2p-ack + - const: a2p-doorbell + + interrupts: + maxItems: 1 + description: + The RPMI shared memory transport supports P2A doorbell as a wired + interrupt and this property specifies the interrupt source. + + msi-parent: + description: + The RPMI shared memory transport supports P2A doorbell as a system MSI + and this property specifies the target MSI controller. + + riscv,slot-size: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 64 + description: + Power-of-2 RPMI slot size of the RPMI shared memory transport. + + riscv,a2p-doorbell-value: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0x1 + description: + Value written to the 32-bit A2P doorbell register. + + riscv,p2a-doorbell-sysmsi-index: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The RPMI shared memory transport supports P2A doorbell as a system MSI + and this property specifies system MSI index to be used for configuring + the P2A doorbell MSI. + + "#mbox-cells": + const: 1 + description: + The first cell specifies RPMI service group ID. + +required: + - compatible + - reg + - reg-names + - riscv,slot-size + - "#mbox-cells" + +anyOf: + - required: + - interrupts + - required: + - msi-parent + +additionalProperties: false + +examples: + - | + // Example 1 (RPMI shared memory with only 2 queues): + mailbox@10080000 { + compatible = "riscv,rpmi-shmem-mbox"; + reg = <0x10080000 0x10000>, + <0x10090000 0x10000>; + reg-names = "a2p-req", "p2a-ack"; + msi-parent = <&imsic_mlevel>; + riscv,slot-size = <64>; + #mbox-cells = <1>; + }; + - | + // Example 2 (RPMI shared memory with only 4 queues): + mailbox@10001000 { + compatible = "riscv,rpmi-shmem-mbox"; + reg = <0x10001000 0x800>, + <0x10001800 0x800>, + <0x10002000 0x800>, + <0x10002800 0x800>, + <0x10003000 0x4>; + reg-names = "a2p-req", "p2a-ack", "p2a-req", "a2p-ack", "a2p-doorbell"; + msi-parent = <&imsic_mlevel>; + riscv,slot-size = <64>; + riscv,a2p-doorbell-value = <0x00008000>; + #mbox-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/riscv,sbi-mpxy-mbox.yaml b/Documentation/devicetree/bindings/mailbox/riscv,sbi-mpxy-mbox.yaml new file mode 100644 index 000000000..061437a0b --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/riscv,sbi-mpxy-mbox.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/riscv,sbi-mpxy-mbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V SBI Message Proxy (MPXY) extension based mailbox + +maintainers: + - Anup Patel <anup@brainfault.org> + +description: | + The RISC-V SBI Message Proxy (MPXY) extension [1] allows supervisor + software to send messages through the SBI implementation (M-mode + firmware or HS-mode hypervisor). The underlying message protocol + and message format used by the supervisor software could be some + other standard protocol compatible with the SBI MPXY extension + (such as RISC-V Platform Management Interface (RPMI) [2]). + + =========================================== + References + =========================================== + + [1] RISC-V Supervisor Binary Interface (SBI) v3.0 (or higher) + https://github.com/riscv-non-isa/riscv-sbi-doc/releases + + [2] RISC-V Platform Management Interface (RPMI) v1.0 (or higher) + https://github.com/riscv-non-isa/riscv-rpmi/releases + +properties: + compatible: + const: riscv,sbi-mpxy-mbox + + "#mbox-cells": + const: 2 + description: + The first cell specifies channel_id of the SBI MPXY channel, + the second cell specifies MSG_PROT_ID of the SBI MPXY channel + +required: + - compatible + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + mailbox { + compatible = "riscv,sbi-mpxy-mbox"; + #mbox-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/rockchip,rk3368-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/rockchip,rk3368-mailbox.yaml new file mode 100644 index 000000000..107bc96a8 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/rockchip,rk3368-mailbox.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/rockchip,rk3368-mailbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3368 Mailbox Controller + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +description: + The Rockchip mailbox is used by the Rockchip CPU cores to communicate + requests to MCU processor. + +properties: + compatible: + const: rockchip,rk3368-mailbox + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: pclk_mailbox + + interrupts: + description: One interrupt for each channel + maxItems: 4 + + '#mbox-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#mbox-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mailbox@ff6b0000 { + compatible = "rockchip,rk3368-mailbox"; + reg = <0xff6b0000 0x1000>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/sophgo,cv1800b-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/sophgo,cv1800b-mailbox.yaml new file mode 100644 index 000000000..24e126bd3 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/sophgo,cv1800b-mailbox.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/sophgo,cv1800b-mailbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sophgo CV1800/SG2000 mailbox controller + +maintainers: + - Yuntao Dai <d1581209858@live.com> + - Junhui Liu <junhui.liu@pigmoral.tech> + +description: + Mailboxes integrated in Sophgo CV1800/SG2000 SoCs have 8 channels, each + shipping an 8-byte FIFO. Any processor can write to an arbitrary channel + and raise interrupts to receivers. Sending messages to itself is also + supported. + +properties: + compatible: + const: sophgo,cv1800b-mailbox + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#mbox-cells": + const: 2 + description: | + <&phandle channel target> + phandle : Label name of mailbox controller + channel : 0-7, Channel index + target : 0-3, Target processor ID + + Sophgo CV1800/SG2000 SoCs include the following processors, numbered as: + <0> Cortex-A53 (Only available on CV181X/SG200X) + <1> C906B + <2> C906L + <3> 8051 + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + mailbox@1900000 { + compatible = "sophgo,cv1800b-mailbox"; + reg = <0x01900000 0x1000>; + interrupts = <101 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml new file mode 100644 index 000000000..bf6ab4e70 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/sprd-mailbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Spreadtrum mailbox controller + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +properties: + compatible: + enum: + - sprd,sc9860-mailbox + - sprd,sc9863a-mailbox + - sprd,ums9230-mailbox + + reg: + items: + - description: inbox registers' base address + - description: outbox registers' base address + + interrupts: + minItems: 2 + maxItems: 3 + + interrupt-names: + minItems: 2 + items: + - const: inbox + - const: outbox + - const: supp-outbox + + clocks: + maxItems: 1 + + clock-names: + items: + - const: enable + + "#mbox-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - "#mbox-cells" + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + mailbox: mailbox@400a0000 { + compatible = "sprd,sc9860-mailbox"; + reg = <0x400a0000 0x8000>, <0x400a8000 0x8000>; + #mbox-cells = <1>; + clock-names = "enable"; + clocks = <&aon_gate 53>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "inbox", "outbox"; + }; +... diff --git a/Documentation/devicetree/bindings/mailbox/st,sti-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/st,sti-mailbox.yaml new file mode 100644 index 000000000..a023c28df --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/st,sti-mailbox.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/st,sti-mailbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics Mailbox Driver for STi platform + +description: + Each ST Mailbox IP currently consists of 4 instances of 32 channels. + Messages are passed between Application and Remote processors using + shared memory. + +maintainers: + - Patrice Chotard <patrice.chotard@foss.st.com> + +properties: + compatible: + const: st,stih407-mailbox + + reg: + maxItems: 1 + + mbox-name: + $ref: /schemas/types.yaml#/definitions/string + description: name of the mailbox IP + + interrupts: + description: the irq line for the RX mailbox + maxItems: 1 + + "#mbox-cells": + const: 2 + +required: + - compatible + - reg + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + mailbox0: mailbox@8f00000 { + compatible = "st,stih407-mailbox"; + reg = <0x8f00000 0x1000>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + mbox-name = "a9"; + }; + +... diff --git a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml new file mode 100644 index 000000000..134fd223a --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/st,stm32-ipcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 IPC controller + +description: + The IPCC block provides a non blocking signaling mechanism to post and + retrieve messages in an atomic way between two processors. + It provides the signaling for N bidirectionnal channels. The number of + channels (N) can be read from a dedicated register. + +maintainers: + - Fabien Dessenne <fabien.dessenne@foss.st.com> + - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> + +properties: + compatible: + const: st,stm32mp1-ipcc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + items: + - description: rx channel occupied + - description: tx channel free + + interrupt-names: + items: + - const: rx + - const: tx + + wakeup-source: true + + "#mbox-cells": + const: 1 + + st,proc-id: + description: Processor id using the mailbox (0 or 1) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + +required: + - compatible + - reg + - st,proc-id + - clocks + - interrupt-names + - "#mbox-cells" + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + ipcc: mailbox@4c001000 { + compatible = "st,stm32mp1-ipcc"; + #mbox-cells = <1>; + reg = <0x4c001000 0x400>; + st,proc-id = <0>; + interrupts-extended = <&exti 61 1>, + <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx", "tx"; + clocks = <&rcc_clk IPCC>; + wakeup-source; + }; + +... diff --git a/Documentation/devicetree/bindings/mailbox/thead,th1520-mbox.yaml b/Documentation/devicetree/bindings/mailbox/thead,th1520-mbox.yaml new file mode 100644 index 000000000..0971fb978 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/thead,th1520-mbox.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/thead,th1520-mbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: T-head TH1520 Mailbox Controller + +description: + The T-head mailbox controller enables communication and coordination between + cores within the SoC by passing messages (e.g., data, status, and control) + through mailbox channels. It also allows one core to signal another processor + using interrupts via the Interrupt Controller Unit (ICU). + +maintainers: + - Michal Wilczynski <m.wilczynski@samsung.com> + +properties: + compatible: + const: thead,th1520-mbox + + clocks: + items: + - description: Clock for the local mailbox + - description: Clock for remote ICU 0 + - description: Clock for remote ICU 1 + - description: Clock for remote ICU 2 + + clock-names: + items: + - const: clk-local + - const: clk-remote-icu0 + - const: clk-remote-icu1 + - const: clk-remote-icu2 + + reg: + items: + - description: Mailbox local base address + - description: Remote ICU 0 base address + - description: Remote ICU 1 base address + - description: Remote ICU 2 base address + + reg-names: + items: + - const: local + - const: remote-icu0 + - const: remote-icu1 + - const: remote-icu2 + + interrupts: + maxItems: 1 + + '#mbox-cells': + const: 1 + description: + The one and only cell describes destination CPU ID. + +required: + - compatible + - clocks + - clock-names + - reg + - reg-names + - interrupts + - '#mbox-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/thead,th1520-clk-ap.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + mailbox@ffffc38000 { + compatible = "thead,th1520-mbox"; + reg = <0xff 0xffc38000 0x0 0x4000>, + <0xff 0xffc44000 0x0 0x1000>, + <0xff 0xffc4c000 0x0 0x1000>, + <0xff 0xffc54000 0x0 0x1000>; + reg-names = "local", "remote-icu0", "remote-icu1", "remote-icu2"; + clocks = <&clk CLK_MBOX0>, <&clk CLK_MBOX1>, <&clk CLK_MBOX2>, + <&clk CLK_MBOX3>; + clock-names = "clk-local", "clk-remote-icu0", "clk-remote-icu1", + "clk-remote-icu2"; + interrupts = <28>; + #mbox-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt b/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt new file mode 100644 index 000000000..ebf0e3710 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt @@ -0,0 +1,50 @@ +Texas Instruments' Message Manager Driver +======================================== + +The Texas Instruments' Message Manager is a mailbox controller that has +configurable queues selectable at SoC(System on Chip) integration. The Message +manager is broken up into queues in different address regions that are called +"proxies" - each instance is unidirectional and is instantiated at SoC +integration level to indicate receive or transmit path. + +Message Manager Device Node: +=========================== +Required properties: +-------------------- +- compatible: Shall be: "ti,k2g-message-manager" +- reg-names queue_proxy_region - Map the queue proxy region. + queue_state_debug_region - Map the queue state debug + region. +- reg: Contains the register map per reg-names. +- #mbox-cells Shall be 2. Contains the queue ID and proxy ID in that + order referring to the transfer path. +- interrupt-names: Contains interrupt names matching the rx transfer path + for a given SoC. Receive interrupts shall be of the + format: "rx_<QID>". + For ti,k2g-message-manager, this shall contain: + "rx_005", "rx_057" +- interrupts: Contains the interrupt information corresponding to + interrupt-names property. + +Example(K2G): +------------ + + msgmgr: msgmgr@2a00000 { + compatible = "ti,k2g-message-manager"; + #mbox-cells = <2>; + reg-names = "queue_proxy_region", "queue_state_debug_region"; + reg = <0x02a00000 0x400000>, <0x028c3400 0x400>; + interrupt-names = "rx_005", "rx_057"; + interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + }; + + pmmc: pmmc { + [...] + mbox-names = "rx", "tx"; + # RX queue ID is 5, proxy ID is 2 + # TX queue ID is 0, proxy ID is 0 + mboxes= <&msgmgr 5 2>, + <&msgmgr 0 0>; + [...] + }; diff --git a/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml new file mode 100644 index 000000000..8504ceb64 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml @@ -0,0 +1,295 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/ti,omap-mailbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI OMAP2+ and K3 Mailbox devices + +maintainers: + - Suman Anna <s-anna@ti.com> + +description: | + The OMAP Mailbox hardware facilitates communication between different + processors using a queued mailbox interrupt mechanism. The IP block is + external to the various processor subsystems and is connected on an + interconnect bus. The communication is achieved through a set of registers + for message storage and interrupt configuration registers. + + Each mailbox IP block/cluster has a certain number of h/w fifo queues and + output interrupt lines. An output interrupt line is routed to an interrupt + controller within a processor subsystem, and there can be more than one line + going to a specific processor's interrupt controller. The interrupt line + connections are fixed for an instance and are dictated by the IP integration + into the SoC (excluding the SoCs that have an Interrupt Crossbar or an + Interrupt Router IP). Each interrupt line is programmable through a set of + interrupt configuration registers, and have a rx and tx interrupt source per + h/w fifo. Communication between different processors is achieved through the + appropriate programming of the rx and tx interrupt sources on the appropriate + interrupt lines. + + The number of h/w fifo queues and interrupt lines dictate the usable + registers. All the current OMAP SoCs except for the newest DRA7xx SoC has a + single IP instance. DRA7xx has multiple instances with different number of + h/w fifo queues and interrupt lines between different instances. The interrupt + lines can also be routed to different processor sub-systems on DRA7xx as they + are routed through the Crossbar, a kind of interrupt router/multiplexer. The + K3 AM65x, J721E and J7200 SoCs has each of these instances form a cluster and + combine multiple clusters into a single IP block present within the Main + NavSS. The interrupt lines from all these clusters are multiplexed and routed + to different processor subsystems over a limited number of common interrupt + output lines of an Interrupt Router. The AM64x SoCS also uses a single IP + block comprising of multiple clusters, but the number of clusters are + smaller, and the interrupt output lines are connected directly to various + processors. + + Mailbox Controller Nodes + ========================= + A Mailbox device node is used to represent a Mailbox IP instance/cluster + within a SoC. The sub-mailboxes (actual communication channels) are + represented as child nodes of this parent node. + + Mailbox Users + ============== + A device needing to communicate with a target processor device should specify + them using the common mailbox binding properties, "mboxes" and the optional + "mbox-names" (please see Documentation/devicetree/bindings/mailbox/mailbox.txt + for details). Each value of the mboxes property should contain a phandle to + the mailbox controller device node and an args specifier that will be the + phandle to the intended sub-mailbox child node to be used for communication. + The equivalent "mbox-names" property value can be used to give a name to the + communication channel to be used by the client user. + +$defs: + omap-mbox-descriptor: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + The omap-mbox-descriptor is made of up of 3 cells and represents a single + uni-directional communication channel. A typical sub-mailbox device uses + two such channels - one for transmitting (Tx) and one for receiving (Rx). + items: + - description: + mailbox fifo id used either for transmitting on ti,mbox-tx channel or + for receiving on ti,mbox-rx channel (fifo_id). This is the hardware + fifo number within a mailbox cluster. + - description: + irq identifier index number to use from the parent's interrupts data. + Should be 0 for most of the cases, a positive index value is seen only + on mailboxes that have multiple interrupt lines connected to the MPU + processor (irq_id). This is an index number in the listed interrupts + property in the DT nodes. + - description: + mailbox user id for identifying the interrupt line associated with + generating a tx/rx fifo interrupt (usr_id). This is the hardware + user id number within a mailbox cluster. + + omap-sub-mailbox: + type: object + description: + The omap-sub-mailbox is a child node within a Mailbox controller device + node and represents the actual communication channel used to send and + receive messages between the host processor and a remote processor. Each + child node should have a unique node name across all the different mailbox + device nodes. + + properties: + ti,mbox-tx: + $ref: "#/$defs/omap-mbox-descriptor" + description: sub-mailbox descriptor property defining a Tx fifo. + + ti,mbox-rx: + $ref: "#/$defs/omap-mbox-descriptor" + description: sub-mailbox descriptor property defining a Rx fifo. + + ti,mbox-send-noirq: + type: boolean + description: + Quirk flag to allow the client user of this sub-mailbox to send + messages without triggering a Tx ready interrupt, and to control + the Tx ticker. Should be used only on sub-mailboxes used to + communicate with WkupM3 remote processor on AM33xx/AM43xx SoCs. + + required: + - ti,mbox-tx + - ti,mbox-rx + +properties: + compatible: + enum: + - ti,omap2-mailbox # for OMAP2420, OMAP2430 SoCs + - ti,omap3-mailbox # for OMAP3430, OMAP3630 SoCs + - ti,omap4-mailbox # for OMAP44xx, OMAP54xx, AM33xx, AM43xx and DRA7xx SoCs + - ti,am654-mailbox # for K3 AM65x, J721E and J7200 SoCs + - ti,am64-mailbox # for K3 AM64x SoCs + + reg: + maxItems: 1 + + interrupts: + description: + Contains the interrupt information for the mailbox device. The format is + dependent on which interrupt controller the Mailbox device uses. The + number of interrupts listed will at most be the value specified in + ti,mbox-num-users property, but is usually limited by the number of + interrupts reaching the main processor. An interrupt-parent property + is required on SoCs where the interrupt lines are connected through a + Interrupt Router before reaching the main processor's GIC. + + "#mbox-cells": + const: 1 + description: + The specifier is a phandle to an omap-sub-mailbox device. + + ti,mbox-num-users: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of targets (processor devices) that the mailbox device can + interrupt. + + ti,mbox-num-fifos: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of h/w fifo queues within the mailbox IP block. + + ti,hwmods: + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + description: + Name of the hwmod associated with the mailbox. This should be defined + in the mailbox node only if the node is not defined as a child node of + a corresponding sysc interconnect node. + + This property is only needed on some legacy OMAP SoCs which have not + yet been converted to the ti,sysc interconnect hierarchy, but is + otherwise considered obsolete. + +patternProperties: + "^mbox-[a-z0-9-]+$": + $ref: "#/$defs/omap-sub-mailbox" + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + - ti,mbox-num-users + - ti,mbox-num-fifos + +allOf: + - if: + properties: + compatible: + enum: + - ti,am654-mailbox + - ti,am64-mailbox + then: + properties: + ti,mbox-num-users: + const: 4 + ti,mbox-num-fifos: + const: 16 + interrupts: + minItems: 1 + maxItems: 4 + + - if: + properties: + compatible: + enum: + - ti,omap4-mailbox + then: + properties: + ti,mbox-num-users: + enum: [3, 4] + ti,mbox-num-fifos: + enum: [8, 12] + interrupts: + minItems: 1 + maxItems: 4 + + - if: + properties: + compatible: + enum: + - ti,omap3-mailbox + then: + properties: + ti,mbox-num-users: + const: 2 + ti,mbox-num-fifos: + const: 2 + interrupts: + minItems: 1 + maxItems: 1 + + - if: + properties: + compatible: + enum: + - ti,omap2-mailbox + then: + properties: + ti,mbox-num-users: + const: 4 + ti,mbox-num-fifos: + const: 6 + interrupts: + minItems: 1 + maxItems: 2 + +additionalProperties: false + +examples: + - | + /* OMAP4 */ + #include <dt-bindings/interrupt-controller/arm-gic.h> + mailbox@4a0f4000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4a0f4000 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + + mbox_ipu: mbox-ipu { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_dsp: mbox-dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <2 0 0>; + }; + }; + + - | + /* AM33xx */ + mailbox@480c8000 { + compatible = "ti,omap4-mailbox"; + reg = <0x480c8000 0x200>; + interrupts = <77>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <8>; + + mbox_wkupm3: mbox-wkup-m3 { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <0 0 3>; + ti,mbox-send-noirq; + }; + }; + + - | + /* AM65x */ + mailbox@31f80000 { + compatible = "ti,am654-mailbox"; + reg = <0x31f80000 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + interrupts = <436>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-tx = <1 0 0>; + ti,mbox-rx = <0 0 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml b/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml new file mode 100644 index 000000000..c321b69f0 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/ti,secure-proxy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments' Secure Proxy + +maintainers: + - Nishanth Menon <nm@ti.com> + +description: | + The Texas Instruments' secure proxy is a mailbox controller that has + configurable queues selectable at SoC(System on Chip) integration. The + Message manager is broken up into different address regions that are + called "threads" or "proxies" - each instance is unidirectional and is + instantiated at SoC integration level by system controller to indicate + receive or transmit path. + +properties: + $nodename: + pattern: "^mailbox@[0-9a-f]+$" + + compatible: + const: ti,am654-secure-proxy + + "#mbox-cells": + const: 1 + description: + Contains the secure proxy thread ID used for the specific transfer path. + + reg-names: + items: + - const: target_data + - const: rt + - const: scfg + + reg: + maxItems: 3 + + interrupt-names: + minItems: 1 + maxItems: 100 + items: + pattern: "^rx_[0-9]{3}$" + description: + Contains the interrupt name information for the Rx interrupt path for + secure proxy thread in the form 'rx_<PID>'. + + interrupts: + minItems: 1 + maxItems: 100 + description: + Contains the interrupt information for the Rx interrupt path for secure + proxy. + +required: + - compatible + - reg-names + - reg + - interrupt-names + - interrupts + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + secure_proxy: mailbox@32c00000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x32c00000 0x100000>, + <0x32400000 0x100000>, + <0x32800000 0x100000>; + interrupt-names = "rx_011"; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml new file mode 100644 index 000000000..a5205ee5a --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml @@ -0,0 +1,264 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/xlnx,zynqmp-ipi-mailbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx IPI(Inter Processor Interrupt) mailbox controller + +description: | + The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage + messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI + agent owns registers used for notification and buffers for message. + + For Versal devices, there are two types of IPI channels: + - Buffered channels: Support message passing and require the "msg" + register region to be present on both the host and remote IPI agents. + - Buffer-less channels: Support notification only and do not require the + "msg" register region. For these channels, the "msg" region should be + omitted. + + For message passing, both the host and remote IPI agents must define the "msg" + register region. If either agent omits the "msg" region, only notification + based communication is possible. + + +-------------------------------------+ + | Xilinx ZynqMP IPI Controller | + +-------------------------------------+ + +--------------------------------------------------+ + TF-A | | + | | + | | + +--------------------------+ | + | | + | | + +--------------------------------------------------+ + +------------------------------------------+ + | +----------------+ +----------------+ | + Hardware | | IPI Agent | | IPI Buffers | | + | | Registers | | | | + | | | | | | + | +----------------+ +----------------+ | + | | + | Xilinx IPI Agent Block | + +------------------------------------------+ + +maintainers: + - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com> + +properties: + compatible: + enum: + - xlnx,zynqmp-ipi-mailbox + - xlnx,versal-ipi-mailbox + + method: + description: | + The method of calling the PM-API firmware layer. + Permitted values are. + - "smc" : SMC #0, following the SMCCC + - "hvc" : HVC #0, following the SMCCC + + $ref: /schemas/types.yaml#/definitions/string + enum: + - smc + - hvc + default: smc + + '#address-cells': + const: 2 + + '#size-cells': + const: 2 + + reg: + maxItems: 2 + + reg-names: + maxItems: 2 + + xlnx,ipi-id: + description: | + Remote Xilinx IPI agent ID of which the mailbox is connected to. + $ref: /schemas/types.yaml#/definitions/uint32 + + interrupts: + maxItems: 1 + + ranges: true + +patternProperties: + '^mailbox@[0-9a-f]+$': + description: Internal ipi mailbox node + type: object # DT nodes are json objects + additionalProperties: false + properties: + + compatible: + enum: + - xlnx,zynqmp-ipi-dest-mailbox + - xlnx,versal-ipi-dest-mailbox + + reg: + minItems: 1 + maxItems: 4 + + reg-names: + minItems: 1 + maxItems: 4 + + xlnx,ipi-id: + description: + Remote Xilinx IPI agent ID of which the mailbox is connected to. + $ref: /schemas/types.yaml#/definitions/uint32 + + '#mbox-cells': + const: 1 + description: + It contains tx(0) or rx(1) channel IPI id number. + + allOf: + - if: + properties: + compatible: + contains: + enum: + - xlnx,zynqmp-ipi-dest-mailbox + then: + properties: + reg: + maxItems: 4 + + reg-names: + items: + - const: local_request_region + - const: local_response_region + - const: remote_request_region + - const: remote_response_region + else: + properties: + reg: + minItems: 1 + items: + - description: Remote IPI agent control register region + - description: Remote IPI agent optional message buffers + + reg-names: + minItems: 1 + items: + - const: ctrl + - const: msg + + required: + - compatible + - reg + - reg-names + - '#mbox-cells' + - xlnx,ipi-id + +required: + - compatible + - interrupts + - '#address-cells' + - '#size-cells' + - xlnx,ipi-id + +allOf: + - if: + properties: + compatible: + contains: + enum: + - xlnx,zynqmp-ipi-mailbox + then: + properties: + reg: false + reg-names: false + + else: + properties: + reg: + items: + - description: Host IPI agent control register region + - description: Host IPI agent optional message buffers + + reg-names: + items: + - const: ctrl + - const: msg + + required: + - reg + - reg-names + +additionalProperties: false + +examples: + - | + #include<dt-bindings/interrupt-controller/arm-gic.h> + + amba { + #address-cells = <0x2>; + #size-cells = <0x2>; + zynqmp-mailbox { + compatible = "xlnx,zynqmp-ipi-mailbox"; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + xlnx,ipi-id = <0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + mailbox: mailbox@ff9905c0 { + compatible = "xlnx,zynqmp-ipi-dest-mailbox"; + reg = <0x0 0xff9905c0 0x0 0x20>, + <0x0 0xff9905e0 0x0 0x20>, + <0x0 0xff990e80 0x0 0x20>, + <0x0 0xff990ea0 0x0 0x20>; + reg-names = "local_request_region", + "local_response_region", + "remote_request_region", + "remote_response_region"; + #mbox-cells = <1>; + xlnx,ipi-id = <4>; + }; + }; + }; + + - | + #include<dt-bindings/interrupt-controller/arm-gic.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + mailbox@ff300000 { + compatible = "xlnx,versal-ipi-mailbox"; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0xff300000 0x0 0x1000>, + <0x0 0xff990000 0x0 0x1ff>; + reg-names = "ctrl", "msg"; + xlnx,ipi-id = <0>; + ranges; + + /* buffered IPI */ + mailbox@ff340000 { + compatible = "xlnx,versal-ipi-dest-mailbox"; + reg = <0x0 0xff340000 0x0 0x1000>, + <0x0 0xff990400 0x0 0x1ff>; + reg-names = "ctrl", "msg"; + #mbox-cells = <1>; + xlnx,ipi-id = <4>; + }; + + /* bufferless IPI */ + mailbox@ff370000 { + compatible = "xlnx,versal-ipi-dest-mailbox"; + reg = <0x0 0xff370000 0x0 0x1000>; + reg-names = "ctrl"; + #mbox-cells = <1>; + xlnx,ipi-id = <7>; + }; + }; + }; +... |