diff options
Diffstat (limited to 'Documentation/ABI/testing/sysfs-driver-ivpu')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-driver-ivpu | 65 |
1 files changed, 65 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-ivpu b/Documentation/ABI/testing/sysfs-driver-ivpu new file mode 100644 index 000000000..91685774e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-ivpu @@ -0,0 +1,65 @@ +What: /sys/bus/pci/drivers/intel_vpu/.../npu_busy_time_us +Date: May 2024 +KernelVersion: 6.11 +Contact: dri-devel@lists.freedesktop.org +Description: Time in microseconds that the device spent executing jobs. The time is + counted when and only when there are jobs submitted to firmware. This time + can be used to measure the utilization of NPU, either by calculating the + difference between two timepoints or monitoring utilization percentage by + reading periodically. Recommended read period is 1 second to avoid impact + on job submission performance. Read-only. + +What: /sys/bus/pci/drivers/intel_vpu/.../npu_memory_utilization +Date: Jan 2025 +KernelVersion: 6.15 +Contact: dri-devel@lists.freedesktop.org +Description: Current NPU memory utilization in bytes. Reports the total size of all + resident buffer objects allocated for NPU use. Read-only. + +What: /sys/bus/pci/drivers/intel_vpu/.../freq/hw_min_freq +Date: April 2026 +KernelVersion: 7.2 +Contact: dri-devel@lists.freedesktop.org +Description: Minimum frequency in MHz supported by the NPU hardware. This is a + hardware capability and cannot be changed. Read-only. + +What: /sys/bus/pci/drivers/intel_vpu/.../freq/hw_efficient_freq +Date: April 2026 +KernelVersion: 7.2 +Contact: dri-devel@lists.freedesktop.org +Description: Most efficient operating frequency in MHz for the NPU. This represents + the frequency at which the NPU operates most efficiently in terms of power + and performance. Read-only. + +What: /sys/bus/pci/drivers/intel_vpu/.../freq/hw_max_freq +Date: April 2026 +KernelVersion: 7.2 +Contact: dri-devel@lists.freedesktop.org +Description: Maximum frequency in MHz supported by the NPU hardware. This is a + hardware capability and cannot be changed. Read-only. + +What: /sys/bus/pci/drivers/intel_vpu/.../freq/current_freq +Date: April 2026 +KernelVersion: 7.2 +Contact: dri-devel@lists.freedesktop.org +Description: Current operating frequency in MHz of the NPU. The value is valid only + when the device is active; returns 0 when idle. The actual frequency may + be lower than the requested range due to power or thermal constraints. + Read-only. + +What: /sys/bus/pci/drivers/intel_vpu/.../freq/set_min_freq +Date: April 2026 +KernelVersion: 7.2 +Contact: dri-devel@lists.freedesktop.org +Description: Configured minimum operating frequency in MHz (50XX devices and newer). + Values written are clamped to hardware limits (hw_min_freq to hw_max_freq). + If set_min_freq exceeds set_max_freq, the driver clamps set_min_freq to + set_max_freq when selecting the operating frequency. Read-write. + +What: /sys/bus/pci/drivers/intel_vpu/.../freq/set_max_freq +Date: April 2026 +KernelVersion: 7.2 +Contact: dri-devel@lists.freedesktop.org +Description: Configured maximum operating frequency in MHz (50XX devices and newer). + Values written are clamped to hardware limits (hw_min_freq to hw_max_freq). + Read-write. |