KVM: SEV: Do cache maintenance on the source VM during intra-host migrationgrafted

Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed.  Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.

Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical.

Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration")
Cc: stable@vger.kernel.org
Reported-by: Stefan Teodorescu <fane@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260923163721.1584779-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 86 insertions, 0 deletions

diff --git a/tools/testing/vsock/README b/tools/testing/vsock/README
new file mode 100644
index 000000000..680ce666c
--- /dev/null
+++ b/tools/testing/vsock/README
@@ -0,0 +1,86 @@
+AF_VSOCK test suite
+-------------------
+These tests exercise net/vmw_vsock/ host<->guest sockets for VMware, KVM, and
+Hyper-V.
+
+The following tests are available:
+
+  * vsock_test - core AF_VSOCK socket functionality
+  * vsock_diag_test - vsock_diag.ko module for listing open sockets
+
+The following prerequisite steps are not automated and must be performed prior
+to running tests:
+
+1. Build the kernel, make headers_install, and build these tests.
+2. Install the kernel and tests on the host.
+3. Install the kernel and tests inside the guest.
+4. Boot the guest and ensure that the AF_VSOCK transport is enabled.
+
+Invoke test binaries in both directions as follows:
+
+  # host=server, guest=client
+  (host)# $TEST_BINARY --mode=server \
+                       --control-port=1234 \
+                       --peer-cid=3
+  (guest)# $TEST_BINARY --mode=client \
+                        --control-host=$HOST_IP \
+                        --control-port=1234 \
+                        --peer-cid=2
+
+  # host=client, guest=server
+  (guest)# $TEST_BINARY --mode=server \
+                        --control-port=1234 \
+                        --peer-cid=2
+  (host)# $TEST_BINARY --mode=client \
+                       --control-port=$GUEST_IP \
+                       --control-port=1234 \
+                       --peer-cid=3
+
+Some tests are designed to produce kernel memory leaks. Leaks detection,
+however, is deferred to Kernel Memory Leak Detector. It is recommended to enable
+kmemleak (CONFIG_DEBUG_KMEMLEAK=y) and explicitly trigger a scan after each test
+suite run, e.g.
+
+  # echo clear > /sys/kernel/debug/kmemleak
+  # $TEST_BINARY ...
+  # echo "wait for any grace periods" && sleep 2
+  # echo scan > /sys/kernel/debug/kmemleak
+  # echo "wait for kmemleak" && sleep 5
+  # echo scan > /sys/kernel/debug/kmemleak
+  # cat /sys/kernel/debug/kmemleak
+
+For more information see Documentation/dev-tools/kmemleak.rst.
+
+vsock_perf utility
+-------------------
+'vsock_perf' is a simple tool to measure vsock performance. It works in
+sender/receiver modes: sender connect to peer at the specified port and
+starts data transmission to the receiver. After data processing is done,
+it prints several metrics(see below).
+
+Usage:
+# run as sender
+# connect to CID 2, port 1234, send 1G of data, tx buf size is 1M
+./vsock_perf --sender 2 --port 1234 --bytes 1G --buf-size 1M
+
+Output:
+tx performance: A Gbits/s
+
+Output explanation:
+A is calculated as "number of bits to send" / "time in tx loop"
+
+# run as receiver
+# listen port 1234, rx buf size is 1M, socket buf size is 1G, SO_RCVLOWAT is 64K
+./vsock_perf --port 1234 --buf-size 1M --vsk-size 1G --rcvlowat 64K
+
+Output:
+rx performance: A Gbits/s
+total in 'read()': B sec
+POLLIN wakeups: C
+average in 'read()': D ns
+
+Output explanation:
+A is calculated as "number of received bits" / "time in rx loop".
+B is time, spent in 'read()' system call(excluding 'poll()')
+C is number of 'poll()' wake ups with POLLIN bit set.
+D is B / C, e.g. average amount of time, spent in single 'read()'.