Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 86 insertions, 0 deletions

diff --git a/tools/testing/vsock/README b/tools/testing/vsock/README
new file mode 100644
index 000000000..680ce666c
--- /dev/null
+++ b/tools/testing/vsock/README
@@ -0,0 +1,86 @@
+AF_VSOCK test suite
+-------------------
+These tests exercise net/vmw_vsock/ host<->guest sockets for VMware, KVM, and
+Hyper-V.
+
+The following tests are available:
+
+  * vsock_test - core AF_VSOCK socket functionality
+  * vsock_diag_test - vsock_diag.ko module for listing open sockets
+
+The following prerequisite steps are not automated and must be performed prior
+to running tests:
+
+1. Build the kernel, make headers_install, and build these tests.
+2. Install the kernel and tests on the host.
+3. Install the kernel and tests inside the guest.
+4. Boot the guest and ensure that the AF_VSOCK transport is enabled.
+
+Invoke test binaries in both directions as follows:
+
+  # host=server, guest=client
+  (host)# $TEST_BINARY --mode=server \
+                       --control-port=1234 \
+                       --peer-cid=3
+  (guest)# $TEST_BINARY --mode=client \
+                        --control-host=$HOST_IP \
+                        --control-port=1234 \
+                        --peer-cid=2
+
+  # host=client, guest=server
+  (guest)# $TEST_BINARY --mode=server \
+                        --control-port=1234 \
+                        --peer-cid=2
+  (host)# $TEST_BINARY --mode=client \
+                       --control-port=$GUEST_IP \
+                       --control-port=1234 \
+                       --peer-cid=3
+
+Some tests are designed to produce kernel memory leaks. Leaks detection,
+however, is deferred to Kernel Memory Leak Detector. It is recommended to enable
+kmemleak (CONFIG_DEBUG_KMEMLEAK=y) and explicitly trigger a scan after each test
+suite run, e.g.
+
+  # echo clear > /sys/kernel/debug/kmemleak
+  # $TEST_BINARY ...
+  # echo "wait for any grace periods" && sleep 2
+  # echo scan > /sys/kernel/debug/kmemleak
+  # echo "wait for kmemleak" && sleep 5
+  # echo scan > /sys/kernel/debug/kmemleak
+  # cat /sys/kernel/debug/kmemleak
+
+For more information see Documentation/dev-tools/kmemleak.rst.
+
+vsock_perf utility
+-------------------
+'vsock_perf' is a simple tool to measure vsock performance. It works in
+sender/receiver modes: sender connect to peer at the specified port and
+starts data transmission to the receiver. After data processing is done,
+it prints several metrics(see below).
+
+Usage:
+# run as sender
+# connect to CID 2, port 1234, send 1G of data, tx buf size is 1M
+./vsock_perf --sender 2 --port 1234 --bytes 1G --buf-size 1M
+
+Output:
+tx performance: A Gbits/s
+
+Output explanation:
+A is calculated as "number of bits to send" / "time in tx loop"
+
+# run as receiver
+# listen port 1234, rx buf size is 1M, socket buf size is 1G, SO_RCVLOWAT is 64K
+./vsock_perf --port 1234 --buf-size 1M --vsk-size 1G --rcvlowat 64K
+
+Output:
+rx performance: A Gbits/s
+total in 'read()': B sec
+POLLIN wakeups: C
+average in 'read()': D ns
+
+Output explanation:
+A is calculated as "number of received bits" / "time in rx loop".
+B is time, spent in 'read()' system call(excluding 'poll()')
+C is number of 'poll()' wake ups with POLLIN bit set.
+D is B / C, e.g. average amount of time, spent in single 'read()'.