KVM: SEV: Do cache maintenance on the source VM during intra-host migrationgrafted

Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed.  Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.

Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical.

Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration")
Cc: stable@vger.kernel.org
Reported-by: Stefan Teodorescu <fane@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260923163721.1584779-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

24 files changed, 4177 insertions, 0 deletions

diff --git a/tools/testing/selftests/timers/.gitignore b/tools/testing/selftests/timers/.gitignore
new file mode 100644
index 000000000..bb5326ff9
--- /dev/null
+++ b/tools/testing/selftests/timers/.gitignore
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0-only
+alarmtimer-suspend
+change_skew
+clocksource-switch
+inconsistency-check
+leap-a-day
+leapcrash
+mqueue-lat
+nanosleep
+nsleep-lat
+posix_timers
+raw_skew
+rtcpie
+set-2038
+set-tai
+set-timer-lat
+skew_consistency
+threadtest
+valid-adjtimex
+adjtick
+set-tz
+freq-step
diff --git a/tools/testing/selftests/timers/Makefile b/tools/testing/selftests/timers/Makefile
new file mode 100644
index 000000000..0e73a1687
--- /dev/null
+++ b/tools/testing/selftests/timers/Makefile
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0
+CFLAGS += -O3 -Wl,-no-as-needed -Wall
+LDLIBS += -lrt -lpthread -lm
+
+# these are all "safe" tests that don't modify
+# system time or require escalated privileges
+TEST_GEN_PROGS = posix_timers nanosleep nsleep-lat set-timer-lat mqueue-lat \
+	     inconsistency-check raw_skew threadtest rtcpie
+
+DESTRUCTIVE_TESTS = alarmtimer-suspend valid-adjtimex adjtick change_skew \
+		      skew_consistency clocksource-switch freq-step leap-a-day \
+		      leapcrash set-tai set-2038 set-tz
+
+TEST_GEN_PROGS_EXTENDED = $(DESTRUCTIVE_TESTS)
+
+TEST_FILES := settings
+
+include ../lib.mk
+
+# these tests require escalated privileges
+# and may modify the system time or trigger
+# other behavior like suspend
+run_destructive_tests: run_tests
+	$(call RUN_TESTS, $(DESTRUCTIVE_TESTS))
diff --git a/tools/testing/selftests/timers/adjtick.c b/tools/testing/selftests/timers/adjtick.c
new file mode 100644
index 000000000..68009a6d6
--- /dev/null
+++ b/tools/testing/selftests/timers/adjtick.c
@@ -0,0 +1,207 @@
+/* adjtimex() tick adjustment test
+ *		by:   John Stultz <john.stultz@linaro.org>
+ *		(C) Copyright Linaro Limited 2015
+ *		Licensed under the GPLv2
+ *
+ *  To build:
+ *	$ gcc adjtick.c -o adjtick -lrt
+ *
+ *   This program is free software: you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ */
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <time.h>
+
+#include "clock-helpers.h"
+#include "kselftest.h"
+
+#define MILLION			1000000
+
+long systick;
+
+long long llabs(long long val)
+{
+	if (val < 0)
+		val = -val;
+	return val;
+}
+
+unsigned long long ts_to_nsec(struct timespec ts)
+{
+	return ts.tv_sec * NSEC_PER_SEC + ts.tv_nsec;
+}
+
+struct timespec nsec_to_ts(long long ns)
+{
+	struct timespec ts;
+
+	ts.tv_sec = ns/NSEC_PER_SEC;
+	ts.tv_nsec = ns%NSEC_PER_SEC;
+
+	return ts;
+}
+
+long long diff_timespec(struct timespec start, struct timespec end)
+{
+	long long start_ns, end_ns;
+
+	start_ns = ts_to_nsec(start);
+	end_ns = ts_to_nsec(end);
+
+	return end_ns - start_ns;
+}
+
+void get_monotonic_and_raw(struct timespec *mon, struct timespec *raw)
+{
+	struct timespec start, mid, end;
+	long long diff = 0, tmp;
+	int i;
+
+	clock_gettime(CLOCK_MONOTONIC, mon);
+	clock_gettime(CLOCK_MONOTONIC_RAW, raw);
+
+	/* Try to get a more tightly bound pairing */
+	for (i = 0; i < 3; i++) {
+		long long newdiff;
+
+		clock_gettime(CLOCK_MONOTONIC, &start);
+		clock_gettime(CLOCK_MONOTONIC_RAW, &mid);
+		clock_gettime(CLOCK_MONOTONIC, &end);
+
+		newdiff = diff_timespec(start, end);
+		if (diff == 0 || newdiff < diff) {
+			diff = newdiff;
+			*raw = mid;
+			tmp = (ts_to_nsec(start) + ts_to_nsec(end))/2;
+			*mon = nsec_to_ts(tmp);
+		}
+	}
+}
+
+long long get_ppm_drift(void)
+{
+	struct timespec mon_start, raw_start, mon_end, raw_end;
+	long long delta1, delta2, eppm;
+
+	get_monotonic_and_raw(&mon_start, &raw_start);
+
+	sleep(15);
+
+	get_monotonic_and_raw(&mon_end, &raw_end);
+
+	delta1 = diff_timespec(mon_start, mon_end);
+	delta2 = diff_timespec(raw_start, raw_end);
+
+	eppm = (delta1*MILLION)/delta2 - MILLION;
+
+	return eppm;
+}
+
+int check_tick_adj(long tickval)
+{
+	long long eppm, ppm;
+	struct timex tx1;
+
+	tx1.modes	 = ADJ_TICK;
+	tx1.modes	|= ADJ_OFFSET;
+	tx1.modes	|= ADJ_FREQUENCY;
+	tx1.modes	|= ADJ_STATUS;
+
+	tx1.status	= STA_PLL;
+	tx1.offset	= 0;
+	tx1.freq	= 0;
+	tx1.tick	= tickval;
+
+	adjtimex(&tx1);
+
+	sleep(1);
+
+	ppm = ((long long)tickval * MILLION)/systick - MILLION;
+	printf("Estimating tick (act: %ld usec, %lld ppm): ", tickval, ppm);
+
+	eppm = get_ppm_drift();
+	printf("%lld usec, %lld ppm", systick + (systick * eppm / MILLION), eppm);
+	fflush(stdout);
+
+	tx1.modes = 0;
+	adjtimex(&tx1);
+
+	if (tx1.offset || tx1.freq || tx1.tick != tickval) {
+		printf("	[ERROR]\n");
+		printf("\tUnexpected adjtimex return values, make sure ntpd is not running.\n");
+		return -1;
+	}
+
+	/*
+	 * Here we use 100ppm difference as an error bound.
+	 * We likely should see better, but some coarse clocksources
+	 * cannot match the HZ tick size accurately, so we have a
+	 * internal correction factor that doesn't scale exactly
+	 * with the adjustment, resulting in > 10ppm error during
+	 * a 10% adjustment. 100ppm also gives us more breathing
+	 * room for interruptions during the measurement.
+	 */
+	if (llabs(eppm - ppm) > 100) {
+		printf("	[FAILED]\n");
+		return -1;
+	}
+	printf("	[OK]\n");
+
+	return  0;
+}
+
+int main(int argc, char **argv)
+{
+	struct timespec raw;
+	long tick, max, interval, err;
+	struct timex tx1;
+
+	err = 0;
+	setbuf(stdout, NULL);
+
+	if (clock_gettime(CLOCK_MONOTONIC_RAW, &raw)) {
+		printf("ERR: NO CLOCK_MONOTONIC_RAW\n");
+		return -1;
+	}
+
+	printf("Each iteration takes about 15 seconds\n");
+
+	systick = sysconf(_SC_CLK_TCK);
+	systick = USEC_PER_SEC/sysconf(_SC_CLK_TCK);
+	max = systick/10; /* +/- 10% */
+	interval = max/4; /* in 4 steps each side */
+
+	for (tick = (systick - max); tick < (systick + max); tick += interval) {
+		if (check_tick_adj(tick)) {
+			err = 1;
+			break;
+		}
+	}
+
+	/* Reset things to zero */
+	tx1.modes	 = ADJ_TICK;
+	tx1.modes	|= ADJ_OFFSET;
+	tx1.modes	|= ADJ_FREQUENCY;
+
+	tx1.offset	 = 0;
+	tx1.freq	 = 0;
+	tx1.tick	 = systick;
+
+	adjtimex(&tx1);
+
+	if (err)
+		ksft_exit_fail();
+
+	ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/alarmtimer-suspend.c b/tools/testing/selftests/timers/alarmtimer-suspend.c
new file mode 100644
index 000000000..120b3ce8b
--- /dev/null
+++ b/tools/testing/selftests/timers/alarmtimer-suspend.c
@@ -0,0 +1,133 @@
+/* alarmtimer suspend test
+ *		John Stultz (john.stultz@linaro.org)
+ *              (C) Copyright Linaro 2013
+ *              Licensed under the GPLv2
+ *
+ *   This test makes sure the alarmtimer & RTC wakeup code is
+ *   functioning.
+ *
+ *  To build:
+ *	$ gcc alarmtimer-suspend.c -o alarmtimer-suspend -lrt
+ *
+ *   This program is free software: you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ */
+
+
+#include <stdio.h>
+#include <unistd.h>
+#include <time.h>
+#include <string.h>
+#include <signal.h>
+#include <stdlib.h>
+#include <pthread.h>
+#include <errno.h>
+#include "clock-helpers.h"
+#include "kselftest.h"
+
+#define UNREASONABLE_LAT (NSEC_PER_SEC * 5) /* hopefully we resume in 5 secs */
+
+#define SUSPEND_SECS 15
+int alarmcount;
+int alarm_clock_id;
+struct timespec start_time;
+
+long long timespec_sub(struct timespec a, struct timespec b)
+{
+	long long ret = NSEC_PER_SEC * b.tv_sec + b.tv_nsec;
+
+	ret -= NSEC_PER_SEC * a.tv_sec + a.tv_nsec;
+	return ret;
+}
+
+int final_ret;
+
+void sigalarm(int signo)
+{
+	long long delta_ns;
+	struct timespec ts;
+
+	clock_gettime(alarm_clock_id, &ts);
+	alarmcount++;
+
+	delta_ns = timespec_sub(start_time, ts);
+	delta_ns -= NSEC_PER_SEC * SUSPEND_SECS * alarmcount;
+
+	printf("ALARM(%i): %ld:%ld latency: %lld ns ", alarmcount, ts.tv_sec,
+							ts.tv_nsec, delta_ns);
+
+	if (delta_ns > UNREASONABLE_LAT) {
+		printf("[FAIL]\n");
+		final_ret = -1;
+	} else
+		printf("[OK]\n");
+
+}
+
+int main(void)
+{
+	timer_t tm1;
+	struct itimerspec its1, its2;
+	struct sigevent se;
+	struct sigaction act;
+	int signum = SIGRTMAX;
+
+	/* Set up signal handler: */
+	sigfillset(&act.sa_mask);
+	act.sa_flags = 0;
+	act.sa_handler = sigalarm;
+	sigaction(signum, &act, NULL);
+
+	/* Set up timer: */
+	memset(&se, 0, sizeof(se));
+	se.sigev_notify = SIGEV_SIGNAL;
+	se.sigev_signo = signum;
+	se.sigev_value.sival_int = 0;
+
+	for (alarm_clock_id = CLOCK_REALTIME_ALARM;
+			alarm_clock_id <= CLOCK_BOOTTIME_ALARM;
+			alarm_clock_id++) {
+
+		alarmcount = 0;
+		if (timer_create(alarm_clock_id, &se, &tm1) == -1) {
+			printf("timer_create failed, %s unsupported?: %s\n",
+					clock_name(alarm_clock_id), strerror(errno));
+			break;
+		}
+
+		clock_gettime(alarm_clock_id, &start_time);
+		printf("Start time (%s): %ld:%ld\n", clock_name(alarm_clock_id),
+				start_time.tv_sec, start_time.tv_nsec);
+		printf("Setting alarm for every %i seconds\n", SUSPEND_SECS);
+		its1.it_value = start_time;
+		its1.it_value.tv_sec += SUSPEND_SECS;
+		its1.it_interval.tv_sec = SUSPEND_SECS;
+		its1.it_interval.tv_nsec = 0;
+
+		timer_settime(tm1, TIMER_ABSTIME, &its1, &its2);
+
+		while (alarmcount < 5)
+			sleep(1); /* First 5 alarms, do nothing */
+
+		printf("Starting suspend loops\n");
+		while (alarmcount < 10) {
+			int ret;
+
+			sleep(3);
+			ret = system("echo mem > /sys/power/state");
+			if (ret)
+				break;
+		}
+		timer_delete(tm1);
+	}
+	if (final_ret)
+		ksft_exit_fail();
+	ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/change_skew.c b/tools/testing/selftests/timers/change_skew.c
new file mode 100644
index 000000000..387fda10f
--- /dev/null
+++ b/tools/testing/selftests/timers/change_skew.c
@@ -0,0 +1,93 @@
+/* ADJ_FREQ Skew change test
+ *		by: john stultz (johnstul@us.ibm.com)
+ *		(C) Copyright IBM 2012
+ *		Licensed under the GPLv2
+ *
+ *  NOTE: This is a meta-test which cranks the ADJ_FREQ knob and
+ *  then uses other tests to detect problems. Thus this test requires
+ *  that the raw_skew, inconsistency-check and nanosleep tests be
+ *  present in the same directory it is run from.
+ *
+ *  To build:
+ *	$ gcc change_skew.c -o change_skew -lrt
+ *
+ *   This program is free software: you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ */
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <time.h>
+#include "kselftest.h"
+
+int change_skew_test(int ppm)
+{
+	struct timex tx;
+	int ret;
+
+	tx.modes = ADJ_FREQUENCY;
+	tx.freq = ppm << 16;
+
+	ret = adjtimex(&tx);
+	if (ret < 0) {
+		printf("Error adjusting freq\n");
+		return ret;
+	}
+
+	ret = system("./raw_skew");
+	ret |= system("./inconsistency-check");
+	ret |= system("./nanosleep");
+
+	return ret;
+}
+
+
+int main(int argc, char **argv)
+{
+	struct timex tx;
+	int i, ret;
+
+	int ppm[5] = {0, 250, 500, -250, -500};
+
+	/* Kill ntpd */
+	ret = system("killall -9 ntpd");
+
+	/* Make sure there's no offset adjustment going on */
+	tx.modes = ADJ_OFFSET;
+	tx.offset = 0;
+	ret = adjtimex(&tx);
+
+	if (ret < 0) {
+		printf("Maybe you're not running as root?\n");
+		return -1;
+	}
+
+	for (i = 0; i < 5; i++) {
+		printf("Using %i ppm adjustment\n", ppm[i]);
+		ret = change_skew_test(ppm[i]);
+		if (ret)
+			break;
+	}
+
+	/* Set things back */
+	tx.modes = ADJ_FREQUENCY;
+	tx.offset = 0;
+	adjtimex(&tx);
+
+	if (ret) {
+		printf("[FAIL]");
+		ksft_exit_fail();
+	}
+	printf("[OK]");
+	ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/clocksource-switch.c b/tools/testing/selftests/timers/clocksource-switch.c
new file mode 100644
index 000000000..db62a764c
--- /dev/null
+++ b/tools/testing/selftests/timers/clocksource-switch.c
@@ -0,0 +1,191 @@
+/* Clocksource change test
+ *		by: john stultz (johnstul@us.ibm.com)
+ *		(C) Copyright IBM 2012
+ *		Licensed under the GPLv2
+ *
+ *  NOTE: This is a meta-test which quickly changes the clocksource and
+ *  then uses other tests to detect problems. Thus this test requires
+ *  that the inconsistency-check and nanosleep tests be present in the
+ *  same directory it is run from.
+ *
+ *  To build:
+ *	$ gcc clocksource-switch.c -o clocksource-switch -lrt
+ *
+ *   This program is free software: you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ */
+
+
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <time.h>
+#include <unistd.h>
+#include "kselftest.h"
+
+
+int get_clocksources(char list[][30])
+{
+	int fd, i;
+	size_t size;
+	char buf[512];
+	char *head, *tmp;
+
+	fd = open("/sys/devices/system/clocksource/clocksource0/available_clocksource", O_RDONLY);
+
+	size = read(fd, buf, 512);
+
+	close(fd);
+
+	for (i = 0; i < 10; i++)
+		list[i][0] = '\0';
+
+	head = buf;
+	i = 0;
+	while (head - buf < size) {
+		/* Find the next space */
+		for (tmp = head; *tmp != ' '; tmp++) {
+			if (*tmp == '\n')
+				break;
+			if (*tmp == '\0')
+				break;
+		}
+		*tmp = '\0';
+		strcpy(list[i], head);
+		head = tmp + 1;
+		i++;
+	}
+
+	return i-1;
+}
+
+int get_cur_clocksource(char *buf, size_t size)
+{
+	int fd;
+
+	fd = open("/sys/devices/system/clocksource/clocksource0/current_clocksource", O_RDONLY);
+
+	size = read(fd, buf, size);
+
+	return 0;
+}
+
+int change_clocksource(char *clocksource)
+{
+	int fd;
+	ssize_t size;
+
+	fd = open("/sys/devices/system/clocksource/clocksource0/current_clocksource", O_WRONLY);
+
+	if (fd < 0)
+		return -1;
+
+	size = write(fd, clocksource, strlen(clocksource));
+
+	if (size < 0)
+		return -1;
+
+	close(fd);
+	return 0;
+}
+
+
+int run_tests(int secs)
+{
+	int ret;
+	char buf[255];
+
+	sprintf(buf, "./inconsistency-check -t %i", secs);
+	ret = system(buf);
+	if (WIFEXITED(ret) && WEXITSTATUS(ret))
+		return WEXITSTATUS(ret);
+	ret = system("./nanosleep");
+	return WIFEXITED(ret) ? WEXITSTATUS(ret) : 0;
+}
+
+
+char clocksource_list[10][30];
+
+int main(int argc, char **argv)
+{
+	char orig_clk[512];
+	int count, i, status, opt;
+	int do_sanity_check = 1;
+	int runtime = 60;
+	pid_t pid;
+
+	/* Process arguments */
+	while ((opt = getopt(argc, argv, "st:")) != -1) {
+		switch (opt) {
+		case 's':
+			do_sanity_check = 0;
+			break;
+		case 't':
+			runtime = atoi(optarg);
+			break;
+		default:
+			printf("Usage: %s [-s] [-t <secs>]\n", argv[0]);
+			printf("	-s: skip sanity checks\n");
+			printf("	-t: Number of seconds to run\n");
+			exit(-1);
+		}
+	}
+
+	get_cur_clocksource(orig_clk, 512);
+
+	count = get_clocksources(clocksource_list);
+
+	if (change_clocksource(clocksource_list[0])) {
+		printf("Error: You probably need to run this as root\n");
+		return -1;
+	}
+
+	/* Check everything is sane before we start switching asynchronously */
+	if (do_sanity_check) {
+		for (i = 0; i < count; i++) {
+			ksft_print_msg("Validating clocksource %s\n",
+					clocksource_list[i]);
+			if (change_clocksource(clocksource_list[i])) {
+				status = -1;
+				goto out;
+			}
+			if (run_tests(5)) {
+				status = -1;
+				goto out;
+			}
+		}
+	}
+
+	ksft_print_msg("Running Asynchronous Switching Tests...\n");
+	pid = fork();
+	if (!pid)
+		return run_tests(runtime);
+
+	while (pid != waitpid(pid, &status, WNOHANG))
+		for (i = 0; i < count; i++)
+			if (change_clocksource(clocksource_list[i])) {
+				status = -1;
+				goto out;
+			}
+out:
+	change_clocksource(orig_clk);
+
+	/* Print at the end to not mix output with child process */
+	ksft_print_header();
+	ksft_set_plan(1);
+	ksft_test_result(!status, "clocksource-switch\n");
+	ksft_exit(!status);
+}
diff --git a/tools/testing/selftests/timers/freq-step.c b/tools/testing/selftests/timers/freq-step.c
new file mode 100644
index 000000000..cfa46dafe
--- /dev/null
+++ b/tools/testing/selftests/timers/freq-step.c
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * This test checks the response of the system clock to frequency
+ * steps made with adjtimex(). The frequency error and stability of
+ * the CLOCK_MONOTONIC clock relative to the CLOCK_MONOTONIC_RAW clock
+ * is measured in two intervals following the step. The test fails if
+ * values from the second interval exceed specified limits.
+ *
+ * Copyright (C) Miroslav Lichvar <mlichvar@redhat.com>  2017
+ */
+
+#include <math.h>
+#include <stdio.h>
+#include <sys/timex.h>
+#include <time.h>
+#include <unistd.h>
+
+#include "kselftest.h"
+
+#define SAMPLES 100
+#define SAMPLE_READINGS 10
+#define MEAN_SAMPLE_INTERVAL 0.1
+#define STEP_INTERVAL 1.0
+#define MAX_PRECISION 500e-9
+#define MAX_FREQ_ERROR 0.02e-6
+#define MAX_STDDEV 50e-9
+
+#ifndef ADJ_SETOFFSET
+  #define ADJ_SETOFFSET 0x0100
+#endif
+
+struct sample {
+	double offset;
+	double time;
+};
+
+static time_t mono_raw_base;
+static time_t mono_base;
+static long user_hz;
+static double precision;
+static double mono_freq_offset;
+
+static double diff_timespec(struct timespec *ts1, struct timespec *ts2)
+{
+	return ts1->tv_sec - ts2->tv_sec + (ts1->tv_nsec - ts2->tv_nsec) / 1e9;
+}
+
+static double get_sample(struct sample *sample)
+{
+	double delay, mindelay = 0.0;
+	struct timespec ts1, ts2, ts3;
+	int i;
+
+	for (i = 0; i < SAMPLE_READINGS; i++) {
+		clock_gettime(CLOCK_MONOTONIC_RAW, &ts1);
+		clock_gettime(CLOCK_MONOTONIC, &ts2);
+		clock_gettime(CLOCK_MONOTONIC_RAW, &ts3);
+
+		ts1.tv_sec -= mono_raw_base;
+		ts2.tv_sec -= mono_base;
+		ts3.tv_sec -= mono_raw_base;
+
+		delay = diff_timespec(&ts3, &ts1);
+		if (delay <= 1e-9) {
+			i--;
+			continue;
+		}
+
+		if (!i || delay < mindelay) {
+			sample->offset = diff_timespec(&ts2, &ts1);
+			sample->offset -= delay / 2.0;
+			sample->time = ts1.tv_sec + ts1.tv_nsec / 1e9;
+			mindelay = delay;
+		}
+	}
+
+	return mindelay;
+}
+
+static void reset_ntp_error(void)
+{
+	struct timex txc;
+
+	txc.modes = ADJ_SETOFFSET;
+	txc.time.tv_sec = 0;
+	txc.time.tv_usec = 0;
+
+	if (adjtimex(&txc) < 0) {
+		perror("[FAIL] adjtimex");
+		ksft_exit_fail();
+	}
+}
+
+static void set_frequency(double freq)
+{
+	struct timex txc;
+	int tick_offset;
+
+	tick_offset = 1e6 * freq / user_hz;
+
+	txc.modes = ADJ_TICK | ADJ_FREQUENCY;
+	txc.tick = 1000000 / user_hz + tick_offset;
+	txc.freq = (1e6 * freq - user_hz * tick_offset) * (1 << 16);
+
+	if (adjtimex(&txc) < 0) {
+		perror("[FAIL] adjtimex");
+		ksft_exit_fail();
+	}
+}
+
+static void regress(struct sample *samples, int n, double *intercept,
+		    double *slope, double *r_stddev, double *r_max)
+{
+	double x, y, r, x_sum, y_sum, xy_sum, x2_sum, r2_sum;
+	int i;
+
+	x_sum = 0.0, y_sum = 0.0, xy_sum = 0.0, x2_sum = 0.0;
+
+	for (i = 0; i < n; i++) {
+		x = samples[i].time;
+		y = samples[i].offset;
+
+		x_sum += x;
+		y_sum += y;
+		xy_sum += x * y;
+		x2_sum += x * x;
+	}
+
+	*slope = (xy_sum - x_sum * y_sum / n) / (x2_sum - x_sum * x_sum / n);
+	*intercept = (y_sum - *slope * x_sum) / n;
+
+	*r_max = 0.0, r2_sum = 0.0;
+
+	for (i = 0; i < n; i++) {
+		x = samples[i].time;
+		y = samples[i].offset;
+		r = fabs(x * *slope + *intercept - y);
+		if (*r_max < r)
+			*r_max = r;
+		r2_sum += r * r;
+	}
+
+	*r_stddev = sqrt(r2_sum / n);
+}
+
+static int run_test(int calibration, double freq_base, double freq_step)
+{
+	struct sample samples[SAMPLES];
+	double intercept, slope, stddev1, max1, stddev2, max2;
+	double freq_error1, freq_error2;
+	int i;
+
+	set_frequency(freq_base);
+
+	for (i = 0; i < 10; i++)
+		usleep(1e6 * MEAN_SAMPLE_INTERVAL / 10);
+
+	reset_ntp_error();
+
+	set_frequency(freq_base + freq_step);
+
+	for (i = 0; i < 10; i++)
+		usleep(rand() % 2000000 * STEP_INTERVAL / 10);
+
+	set_frequency(freq_base);
+
+	for (i = 0; i < SAMPLES; i++) {
+		usleep(rand() % 2000000 * MEAN_SAMPLE_INTERVAL);
+		get_sample(&samples[i]);
+	}
+
+	if (calibration) {
+		regress(samples, SAMPLES, &intercept, &slope, &stddev1, &max1);
+		mono_freq_offset = slope;
+		printf("CLOCK_MONOTONIC_RAW frequency offset: %11.3f ppm\n",
+		       1e6 * mono_freq_offset);
+		return 0;
+	}
+
+	regress(samples, SAMPLES / 2, &intercept, &slope, &stddev1, &max1);
+	freq_error1 = slope * (1.0 - mono_freq_offset) - mono_freq_offset -
+			freq_base;
+
+	regress(samples + SAMPLES / 2, SAMPLES / 2, &intercept, &slope,
+		&stddev2, &max2);
+	freq_error2 = slope * (1.0 - mono_freq_offset) - mono_freq_offset -
+			freq_base;
+
+	printf("%6.0f %+10.3f %6.0f %7.0f %+10.3f %6.0f %7.0f\t",
+	       1e6 * freq_step,
+	       1e6 * freq_error1, 1e9 * stddev1, 1e9 * max1,
+	       1e6 * freq_error2, 1e9 * stddev2, 1e9 * max2);
+
+	if (fabs(freq_error2) > MAX_FREQ_ERROR || stddev2 > MAX_STDDEV) {
+		printf("[FAIL]\n");
+		return 1;
+	}
+
+	printf("[OK]\n");
+	return 0;
+}
+
+static void init_test(void)
+{
+	struct timespec ts;
+	struct sample sample;
+
+	if (clock_gettime(CLOCK_MONOTONIC_RAW, &ts)) {
+		perror("[FAIL] clock_gettime(CLOCK_MONOTONIC_RAW)");
+		ksft_exit_fail();
+	}
+
+	mono_raw_base = ts.tv_sec;
+
+	if (clock_gettime(CLOCK_MONOTONIC, &ts)) {
+		perror("[FAIL] clock_gettime(CLOCK_MONOTONIC)");
+		ksft_exit_fail();
+	}
+
+	mono_base = ts.tv_sec;
+
+	user_hz = sysconf(_SC_CLK_TCK);
+
+	precision = get_sample(&sample) / 2.0;
+	printf("CLOCK_MONOTONIC_RAW+CLOCK_MONOTONIC precision: %.0f ns\t\t",
+	       1e9 * precision);
+
+	if (precision > MAX_PRECISION)
+		ksft_exit_skip("precision: %.0f ns > MAX_PRECISION: %.0f ns\n",
+				1e9 * precision, 1e9 * MAX_PRECISION);
+
+	printf("[OK]\n");
+	srand(ts.tv_sec ^ ts.tv_nsec);
+
+	run_test(1, 0.0, 0.0);
+}
+
+int main(int argc, char **argv)
+{
+	double freq_base, freq_step;
+	int i, j, fails = 0;
+
+	init_test();
+
+	printf("Checking response to frequency step:\n");
+	printf("  Step           1st interval              2nd interval\n");
+	printf("             Freq    Dev     Max       Freq    Dev     Max\n");
+
+	for (i = 2; i >= 0; i--) {
+		for (j = 0; j < 5; j++) {
+			freq_base = (rand() % (1 << 24) - (1 << 23)) / 65536e6;
+			freq_step = 10e-6 * (1 << (6 * i));
+			fails += run_test(0, freq_base, freq_step);
+		}
+	}
+
+	set_frequency(0.0);
+
+	if (fails)
+		ksft_exit_fail();
+
+	ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/inconsistency-check.c b/tools/testing/selftests/timers/inconsistency-check.c
new file mode 100644
index 000000000..d7982ac4b
--- /dev/null
+++ b/tools/testing/selftests/timers/inconsistency-check.c
@@ -0,0 +1,157 @@
+/* Time inconsistency check test
+ *		by: john stultz (johnstul@us.ibm.com)
+ *		(C) Copyright IBM 2003, 2004, 2005, 2012
+ *		(C) Copyright Linaro Limited 2015
+ *		Licensed under the GPLv2
+ *
+ *  To build:
+ *	$ gcc inconsistency-check.c -o inconsistency-check -lrt
+ *
+ *   This program is free software: you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ */
+
+
+
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#include "clock-helpers.h"
+#include "kselftest.h"
+
+/* CLOCK_HWSPECIFIC == CLOCK_SGI_CYCLE (Deprecated) */
+#define CLOCK_HWSPECIFIC		10
+
+#define CALLS_PER_LOOP 64
+
+/* returns 1 if a <= b, 0 otherwise */
+static inline int in_order(struct timespec a, struct timespec b)
+{
+	/* use unsigned to avoid false positives on 2038 rollover */
+	if ((unsigned long)a.tv_sec < (unsigned long)b.tv_sec)
+		return 1;
+	if ((unsigned long)a.tv_sec > (unsigned long)b.tv_sec)
+		return 0;
+	if (a.tv_nsec > b.tv_nsec)
+		return 0;
+	return 1;
+}
+
+
+
+int consistency_test(int clock_type, unsigned long seconds)
+{
+	struct timespec list[CALLS_PER_LOOP];
+	int i, inconsistent;
+	long now, then;
+	time_t t;
+	char *start_str;
+
+	clock_gettime(clock_type, &list[0]);
+	now = then = list[0].tv_sec;
+
+	/* timestamp start of test */
+	t = time(0);
+	start_str = ctime(&t);
+
+	while (seconds == -1 || now - then < seconds) {
+		inconsistent = -1;
+
+		/* Fill list */
+		for (i = 0; i < CALLS_PER_LOOP; i++)
+			clock_gettime(clock_type, &list[i]);
+
+		/* Check for inconsistencies */
+		for (i = 0; i < CALLS_PER_LOOP - 1; i++)
+			if (!in_order(list[i], list[i+1]))
+				inconsistent = i;
+
+		/* display inconsistency */
+		if (inconsistent >= 0) {
+			unsigned long long delta;
+
+			ksft_print_msg("\%s\n", start_str);
+			for (i = 0; i < CALLS_PER_LOOP; i++) {
+				if (i == inconsistent)
+					ksft_print_msg("--------------------\n");
+				ksft_print_msg("%lu:%lu\n", list[i].tv_sec,
+							list[i].tv_nsec);
+				if (i == inconsistent + 1)
+					ksft_print_msg("--------------------\n");
+			}
+			delta = list[inconsistent].tv_sec * NSEC_PER_SEC;
+			delta += list[inconsistent].tv_nsec;
+			delta -= list[inconsistent+1].tv_sec * NSEC_PER_SEC;
+			delta -= list[inconsistent+1].tv_nsec;
+			ksft_print_msg("Delta: %llu ns\n", delta);
+			fflush(0);
+			/* timestamp inconsistency*/
+			t = time(0);
+			ksft_print_msg("%s\n", ctime(&t));
+			return -1;
+		}
+		now = list[0].tv_sec;
+	}
+	return 0;
+}
+
+
+int main(int argc, char *argv[])
+{
+	int clockid, opt;
+	int userclock = CLOCK_REALTIME;
+	int maxclocks = CLOCK_TAI + 1;
+	int runtime = 10;
+	struct timespec ts;
+
+	/* Process arguments */
+	while ((opt = getopt(argc, argv, "t:c:")) != -1) {
+		switch (opt) {
+		case 't':
+			runtime = atoi(optarg);
+			break;
+		case 'c':
+			userclock = atoi(optarg);
+			maxclocks = userclock + 1;
+			break;
+		default:
+			printf("Usage: %s [-t <secs>] [-c <clockid>]\n", argv[0]);
+			printf("	-t: Number of seconds to run\n");
+			printf("	-c: clockid to use (default, all clockids)\n");
+			exit(-1);
+		}
+	}
+
+	setbuf(stdout, NULL);
+
+	ksft_print_header();
+	ksft_set_plan(maxclocks - userclock);
+
+	for (clockid = userclock; clockid < maxclocks; clockid++) {
+
+		if (clockid == CLOCK_HWSPECIFIC || clock_gettime(clockid, &ts)) {
+			ksft_test_result_skip("%-31s\n", clock_name(clockid));
+			continue;
+		}
+
+		if (consistency_test(clockid, runtime)) {
+			ksft_test_result_fail("%-31s\n", clock_name(clockid));
+			ksft_exit_fail();
+		} else {
+			ksft_test_result_pass("%-31s\n", clock_name(clockid));
+		}
+	}
+	ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/leap-a-day.c b/tools/testing/selftests/timers/leap-a-day.c
new file mode 100644
index 000000000..b93cb5714
--- /dev/null
+++ b/tools/testing/selftests/timers/leap-a-day.c
@@ -0,0 +1,381 @@
+/* Leap second stress test
+ *              by: John Stultz (john.stultz@linaro.org)
+ *              (C) Copyright IBM 2012
+ *              (C) Copyright 2013, 2015 Linaro Limited
+ *              Licensed under the GPLv2
+ *
+ *  This test signals the kernel to insert a leap second
+ *  every day at midnight GMT. This allows for stressing the
+ *  kernel's leap-second behavior, as well as how well applications
+ *  handle the leap-second discontinuity.
+ *
+ *  Usage: leap-a-day [-w] [-i <num>] [-t]
+ *
+ *  Options:
+ *	-w:	Only set the leap-second flag and wait for the leap second
+ *		each iteration, instead of advancing the time. By default the
+ *		date is set to 10 seconds before midnight GMT, which speeds up
+ *		the number of leapsecond transitions tested, but because it
+ *		calls settimeofday frequently, advancing the time by 24 hours
+ *		every ~16 seconds, it may cause application disruption.
+ *
+ *	-i:	Number of iterations to run (-1 = infinite, default: 10)
+ *
+ *	-t:	Print TAI time.
+ *
+ *  Other notes: Disabling NTP prior to running this is advised, as the two
+ *		 may conflict in their commands to the kernel.
+ *
+ *  To build:
+ *	$ gcc leap-a-day.c -o leap-a-day -lrt
+ *
+ *   This program is free software: you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ */
+
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <sys/errno.h>
+#include <string.h>
+#include <signal.h>
+#include <unistd.h>
+#include "clock-helpers.h"
+#include "kselftest.h"
+
+#define CLOCK_TAI 11
+
+time_t next_leap;
+int error_found;
+
+/* returns 1 if a <= b, 0 otherwise */
+static inline int in_order(struct timespec a, struct timespec b)
+{
+	if (a.tv_sec < b.tv_sec)
+		return 1;
+	if (a.tv_sec > b.tv_sec)
+		return 0;
+	if (a.tv_nsec > b.tv_nsec)
+		return 0;
+	return 1;
+}
+
+struct timespec timespec_add(struct timespec ts, unsigned long long ns)
+{
+	ts.tv_nsec += ns;
+	while (ts.tv_nsec >= NSEC_PER_SEC) {
+		ts.tv_nsec -= NSEC_PER_SEC;
+		ts.tv_sec++;
+	}
+	return ts;
+}
+
+char *time_state_str(int state)
+{
+	switch (state) {
+	case TIME_OK:	return "TIME_OK";
+	case TIME_INS:	return "TIME_INS";
+	case TIME_DEL:	return "TIME_DEL";
+	case TIME_OOP:	return "TIME_OOP";
+	case TIME_WAIT:	return "TIME_WAIT";
+	case TIME_BAD:	return "TIME_BAD";
+	}
+	return "ERROR";
+}
+
+/* clear NTP time_status & time_state */
+int clear_time_state(void)
+{
+	struct timex tx;
+	int ret;
+
+	/*
+	 * We have to call adjtime twice here, as kernels
+	 * prior to 6b1859dba01c7 (included in 3.5 and
+	 * -stable), had an issue with the state machine
+	 * and wouldn't clear the STA_INS/DEL flag directly.
+	 */
+	tx.modes = ADJ_STATUS;
+	tx.status = STA_PLL;
+	ret = adjtimex(&tx);
+
+	/* Clear maxerror, as it can cause UNSYNC to be set */
+	tx.modes = ADJ_MAXERROR;
+	tx.maxerror = 0;
+	ret = adjtimex(&tx);
+
+	/* Clear the status */
+	tx.modes = ADJ_STATUS;
+	tx.status = 0;
+	ret = adjtimex(&tx);
+
+	return ret;
+}
+
+/* Make sure we cleanup on ctrl-c */
+void handler(int unused)
+{
+	clear_time_state();
+	exit(0);
+}
+
+void sigalarm(int signo)
+{
+	struct timex tx;
+	int ret;
+
+	tx.modes = 0;
+	ret = adjtimex(&tx);
+
+	if (tx.time.tv_sec < next_leap) {
+		printf("Error: Early timer expiration! (Should be %ld)\n", next_leap);
+		error_found = 1;
+		printf("adjtimex: %10ld sec + %6ld us (%i)\t%s\n",
+					tx.time.tv_sec,
+					tx.time.tv_usec,
+					tx.tai,
+					time_state_str(ret));
+	}
+	if (ret != TIME_WAIT) {
+		printf("Error: Timer seeing incorrect NTP state? (Should be TIME_WAIT)\n");
+		error_found = 1;
+		printf("adjtimex: %10ld sec + %6ld us (%i)\t%s\n",
+					tx.time.tv_sec,
+					tx.time.tv_usec,
+					tx.tai,
+					time_state_str(ret));
+	}
+}
+
+
+/* Test for known hrtimer failure */
+void test_hrtimer_failure(void)
+{
+	struct timespec now, target;
+
+	clock_gettime(CLOCK_REALTIME, &now);
+	target = timespec_add(now, NSEC_PER_SEC/2);
+	clock_nanosleep(CLOCK_REALTIME, TIMER_ABSTIME, &target, NULL);
+	clock_gettime(CLOCK_REALTIME, &now);
+
+	if (!in_order(target, now)) {
+		printf("ERROR: hrtimer early expiration failure observed.\n");
+		error_found = 1;
+	}
+}
+
+int main(int argc, char **argv)
+{
+	timer_t tm1;
+	struct itimerspec its1;
+	struct sigevent se;
+	struct sigaction act;
+	int signum = SIGRTMAX;
+	int settime = 1;
+	int tai_time = 0;
+	int insert = 1;
+	int iterations = 10;
+	int opt;
+
+	/* Process arguments */
+	while ((opt = getopt(argc, argv, "wti:")) != -1) {
+		switch (opt) {
+		case 'w':
+			printf("Only setting leap-flag, not changing time. It could take up to a day for leap to trigger.\n");
+			settime = 0;
+			break;
+		case 'i':
+			iterations = atoi(optarg);
+			break;
+		case 't':
+			tai_time = 1;
+			break;
+		default:
+			printf("Usage: %s [-w] [-i <iterations>]\n", argv[0]);
+			printf("	-w: Set flag and wait for leap second each iteration");
+			printf("	    (default sets time to right before leapsecond)\n");
+			printf("	-i: Number of iterations (-1 = infinite, default is 10)\n");
+			printf("	-t: Print TAI time\n");
+			exit(-1);
+		}
+	}
+
+	/* Make sure TAI support is present if -t was used */
+	if (tai_time) {
+		struct timespec ts;
+
+		if (clock_gettime(CLOCK_TAI, &ts)) {
+			printf("System doesn't support CLOCK_TAI\n");
+			ksft_exit_fail();
+		}
+	}
+
+	signal(SIGINT, handler);
+	signal(SIGKILL, handler);
+
+	/* Set up timer signal handler: */
+	sigfillset(&act.sa_mask);
+	act.sa_flags = 0;
+	act.sa_handler = sigalarm;
+	sigaction(signum, &act, NULL);
+
+	if (iterations < 0)
+		printf("This runs continuously. Press ctrl-c to stop\n");
+	else
+		printf("Running for %i iterations. Press ctrl-c to stop\n", iterations);
+
+	printf("\n");
+	while (1) {
+		int ret;
+		struct timespec ts;
+		struct timex tx;
+		time_t now;
+
+		/* Get the current time */
+		clock_gettime(CLOCK_REALTIME, &ts);
+
+		/* Calculate the next possible leap second 23:59:60 GMT */
+		next_leap = ts.tv_sec;
+		next_leap += 86400 - (next_leap % 86400);
+
+		if (settime) {
+			struct timeval tv;
+
+			tv.tv_sec = next_leap - 10;
+			tv.tv_usec = 0;
+			settimeofday(&tv, NULL);
+			printf("Setting time to %s", ctime(&tv.tv_sec));
+		}
+
+		/* Reset NTP time state */
+		clear_time_state();
+
+		/* Set the leap second insert flag */
+		tx.modes = ADJ_STATUS;
+		if (insert)
+			tx.status = STA_INS;
+		else
+			tx.status = STA_DEL;
+		ret = adjtimex(&tx);
+		if (ret < 0) {
+			printf("Error: Problem setting STA_INS/STA_DEL!: %s\n",
+							time_state_str(ret));
+			ksft_exit_fail();
+		}
+
+		/* Validate STA_INS was set */
+		tx.modes = 0;
+		ret = adjtimex(&tx);
+		if (tx.status != STA_INS && tx.status != STA_DEL) {
+			printf("Error: STA_INS/STA_DEL not set!: %s\n",
+							time_state_str(ret));
+			ksft_exit_fail();
+		}
+
+		if (tai_time) {
+			printf("Using TAI time,"
+				" no inconsistencies should be seen!\n");
+		}
+
+		printf("Scheduling leap second for %s", ctime(&next_leap));
+
+		/* Set up timer */
+		printf("Setting timer for %ld -  %s", next_leap, ctime(&next_leap));
+		memset(&se, 0, sizeof(se));
+		se.sigev_notify = SIGEV_SIGNAL;
+		se.sigev_signo = signum;
+		se.sigev_value.sival_int = 0;
+		if (timer_create(CLOCK_REALTIME, &se, &tm1) == -1) {
+			printf("Error: timer_create failed\n");
+			ksft_exit_fail();
+		}
+		its1.it_value.tv_sec = next_leap;
+		its1.it_value.tv_nsec = 0;
+		its1.it_interval.tv_sec = 0;
+		its1.it_interval.tv_nsec = 0;
+		timer_settime(tm1, TIMER_ABSTIME, &its1, NULL);
+
+		/* Wake up 3 seconds before leap */
+		ts.tv_sec = next_leap - 3;
+		ts.tv_nsec = 0;
+
+
+		while (clock_nanosleep(CLOCK_REALTIME, TIMER_ABSTIME, &ts, NULL))
+			printf("Something woke us up, returning to sleep\n");
+
+		/* Validate STA_INS is still set */
+		tx.modes = 0;
+		ret = adjtimex(&tx);
+		if (tx.status != STA_INS && tx.status != STA_DEL) {
+			printf("Something cleared STA_INS/STA_DEL, setting it again.\n");
+			tx.modes = ADJ_STATUS;
+			if (insert)
+				tx.status = STA_INS;
+			else
+				tx.status = STA_DEL;
+			ret = adjtimex(&tx);
+		}
+
+		/* Check adjtimex output every half second */
+		now = tx.time.tv_sec;
+		while (now < next_leap + 2) {
+			char buf[26];
+			struct timespec tai;
+			int ret;
+
+			tx.modes = 0;
+			ret = adjtimex(&tx);
+
+			if (tai_time) {
+				clock_gettime(CLOCK_TAI, &tai);
+				printf("%ld sec, %9ld ns\t%s\n",
+						tai.tv_sec,
+						tai.tv_nsec,
+						time_state_str(ret));
+			} else {
+				ctime_r(&tx.time.tv_sec, buf);
+				buf[strlen(buf)-1] = 0; /*remove trailing\n */
+
+				printf("%s + %6ld us (%i)\t%s\n",
+						buf,
+						tx.time.tv_usec,
+						tx.tai,
+						time_state_str(ret));
+			}
+			now = tx.time.tv_sec;
+			/* Sleep for another half second */
+			ts.tv_sec = 0;
+			ts.tv_nsec = NSEC_PER_SEC / 2;
+			clock_nanosleep(CLOCK_MONOTONIC, 0, &ts, NULL);
+		}
+		/* Switch to using other mode */
+		insert = !insert;
+
+		/* Note if kernel has known hrtimer failure */
+		test_hrtimer_failure();
+
+		printf("Leap complete\n");
+		if (error_found) {
+			printf("Errors observed\n");
+			clear_time_state();
+			ksft_exit_fail();
+		}
+		printf("\n");
+		if ((iterations != -1) && !(--iterations))
+			break;
+	}
+
+	clear_time_state();
+	ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/leapcrash.c b/tools/testing/selftests/timers/leapcrash.c
new file mode 100644
index 000000000..c2d3bccb5
--- /dev/null
+++ b/tools/testing/selftests/timers/leapcrash.c
@@ -0,0 +1,108 @@
+/* Demo leapsecond deadlock
+ *              by: John Stultz (john.stultz@linaro.org)
+ *              (C) Copyright IBM 2012
+ *              (C) Copyright 2013, 2015 Linaro Limited
+ *              Licensed under the GPL
+ *
+ * This test demonstrates leapsecond deadlock that is possible
+ * on kernels from 2.6.26 to 3.3.
+ *
+ * WARNING: THIS WILL LIKELY HARD HANG SYSTEMS AND MAY LOSE DATA
+ * RUN AT YOUR OWN RISK!
+ *  To build:
+ *	$ gcc leapcrash.c -o leapcrash -lrt
+ */
+
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#include "kselftest.h"
+
+/* clear NTP time_status & time_state */
+int clear_time_state(void)
+{
+	struct timex tx;
+	int ret;
+
+	/*
+	 * We have to call adjtime twice here, as kernels
+	 * prior to 6b1859dba01c7 (included in 3.5 and
+	 * -stable), had an issue with the state machine
+	 * and wouldn't clear the STA_INS/DEL flag directly.
+	 */
+	tx.modes = ADJ_STATUS;
+	tx.status = STA_PLL;
+	ret = adjtimex(&tx);
+
+	tx.modes = ADJ_STATUS;
+	tx.status = 0;
+	ret = adjtimex(&tx);
+
+	return ret;
+}
+
+/* Make sure we cleanup on ctrl-c */
+void handler(int unused)
+{
+	clear_time_state();
+	exit(0);
+}
+
+
+int main(void)
+{
+	struct timex tx;
+	struct timespec ts;
+	time_t next_leap;
+	int count = 0;
+
+	setbuf(stdout, NULL);
+
+	signal(SIGINT, handler);
+	signal(SIGKILL, handler);
+	printf("This runs for a few minutes. Press ctrl-c to stop\n");
+
+	clear_time_state();
+
+
+	/* Get the current time */
+	clock_gettime(CLOCK_REALTIME, &ts);
+
+	/* Calculate the next possible leap second 23:59:60 GMT */
+	next_leap = ts.tv_sec;
+	next_leap += 86400 - (next_leap % 86400);
+
+	for (count = 0; count < 20; count++) {
+		struct timeval tv;
+
+
+		/* set the time to 2 seconds before the leap */
+		tv.tv_sec = next_leap - 2;
+		tv.tv_usec = 0;
+		if (settimeofday(&tv, NULL)) {
+			printf("Error: You're likely not running with proper (ie: root) permissions\n");
+			ksft_exit_fail();
+		}
+		tx.modes = 0;
+		adjtimex(&tx);
+
+		/* hammer on adjtime w/ STA_INS */
+		while (tx.time.tv_sec < next_leap + 1) {
+			/* Set the leap second insert flag */
+			tx.modes = ADJ_STATUS;
+			tx.status = STA_INS;
+			adjtimex(&tx);
+		}
+		clear_time_state();
+		printf(".");
+		fflush(stdout);
+	}
+	printf("[OK]\n");
+	ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/mqueue-lat.c b/tools/testing/selftests/timers/mqueue-lat.c
new file mode 100644
index 000000000..fa4c3e3f5
--- /dev/null
+++ b/tools/testing/selftests/timers/mqueue-lat.c
@@ -0,0 +1,114 @@
+/* Measure mqueue timeout latency
+ *              by: john stultz (john.stultz@linaro.org)
+ *		(C) Copyright Linaro 2013
+ *
+ *		Inspired with permission from example test by:
+ *			Romain Francoise <romain@orebokech.com>
+ *              Licensed under the GPLv2
+ *
+ *  To build:
+ *	$ gcc mqueue-lat.c -o mqueue-lat -lrt
+ *
+ *   This program is free software: you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#include <errno.h>
+#include <mqueue.h>
+#include "clock-helpers.h"
+#include "kselftest.h"
+
+
+#define TARGET_TIMEOUT		100000000	/* 100ms in nanoseconds */
+#define UNRESONABLE_LATENCY	40000000	/* 40ms in nanosecs */
+
+
+long long timespec_sub(struct timespec a, struct timespec b)
+{
+	long long ret = NSEC_PER_SEC * b.tv_sec + b.tv_nsec;
+
+	ret -= NSEC_PER_SEC * a.tv_sec + a.tv_nsec;
+	return ret;
+}
+
+struct timespec timespec_add(struct timespec ts, unsigned long long ns)
+{
+	ts.tv_nsec += ns;
+	while (ts.tv_nsec >= NSEC_PER_SEC) {
+		ts.tv_nsec -= NSEC_PER_SEC;
+		ts.tv_sec++;
+	}
+	return ts;
+}
+
+int mqueue_lat_test(void)
+{
+
+	mqd_t q;
+	struct mq_attr attr;
+	struct timespec start, end, now, target;
+	int i, count, ret;
+
+	q = mq_open("/foo", O_CREAT | O_RDONLY, 0666, NULL);
+	if (q < 0) {
+		perror("mq_open");
+		return -1;
+	}
+	mq_getattr(q, &attr);
+
+
+	count = 100;
+	clock_gettime(CLOCK_MONOTONIC, &start);
+
+	for (i = 0; i < count; i++) {
+		char buf[attr.mq_msgsize];
+
+		clock_gettime(CLOCK_REALTIME, &now);
+		target = now;
+		target = timespec_add(now, TARGET_TIMEOUT); /* 100ms */
+
+		ret = mq_timedreceive(q, buf, sizeof(buf), NULL, &target);
+		if (ret < 0 && errno != ETIMEDOUT) {
+			perror("mq_timedreceive");
+			return -1;
+		}
+	}
+	clock_gettime(CLOCK_MONOTONIC, &end);
+
+	mq_close(q);
+
+	if ((timespec_sub(start, end)/count) > TARGET_TIMEOUT + UNRESONABLE_LATENCY)
+		return -1;
+
+	return 0;
+}
+
+int main(int argc, char **argv)
+{
+	int ret;
+
+	printf("Mqueue latency :                          ");
+	fflush(stdout);
+
+	ret = mqueue_lat_test();
+	if (ret < 0) {
+		printf("[FAILED]\n");
+		ksft_exit_fail();
+	}
+	printf("[OK]\n");
+	ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/nanosleep.c b/tools/testing/selftests/timers/nanosleep.c
new file mode 100644
index 000000000..b45e4c855
--- /dev/null
+++ b/tools/testing/selftests/timers/nanosleep.c
@@ -0,0 +1,183 @@
+/* Make sure timers don't return early
+ *              by: john stultz (johnstul@us.ibm.com)
+ *		    John Stultz (john.stultz@linaro.org)
+ *              (C) Copyright IBM 2012
+ *              (C) Copyright Linaro 2013 2015
+ *              Licensed under the GPLv2
+ *
+ *  To build:
+ *	$ gcc nanosleep.c -o nanosleep -lrt
+ *
+ *   This program is free software: you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ */
+
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#include "clock-helpers.h"
+#include "kselftest.h"
+
+/* returns 1 if a <= b, 0 otherwise */
+static inline int in_order(struct timespec a, struct timespec b)
+{
+	if (a.tv_sec < b.tv_sec)
+		return 1;
+	if (a.tv_sec > b.tv_sec)
+		return 0;
+	if (a.tv_nsec > b.tv_nsec)
+		return 0;
+	return 1;
+}
+
+struct timespec timespec_add(struct timespec ts, unsigned long long ns)
+{
+	ts.tv_nsec += ns;
+	while (ts.tv_nsec >= NSEC_PER_SEC) {
+		ts.tv_nsec -= NSEC_PER_SEC;
+		ts.tv_sec++;
+	}
+	return ts;
+}
+
+int nanosleep_test(int clockid, long long ns)
+{
+	struct timespec now, target, rel;
+
+	/* First check abs time */
+	if (clock_gettime(clockid, &now))
+		return KSFT_SKIP;
+	target = timespec_add(now, ns);
+
+	if (clock_nanosleep(clockid, TIMER_ABSTIME, &target, NULL))
+		return KSFT_SKIP;
+	clock_gettime(clockid, &now);
+
+	if (!in_order(target, now))
+		return KSFT_FAIL;
+
+	/* Second check reltime */
+	clock_gettime(clockid, &now);
+	rel.tv_sec = 0;
+	rel.tv_nsec = 0;
+	rel = timespec_add(rel, ns);
+	target = timespec_add(now, ns);
+	clock_nanosleep(clockid, 0, &rel, NULL);
+	clock_gettime(clockid, &now);
+
+	if (!in_order(target, now))
+		return KSFT_FAIL;
+	return KSFT_PASS;
+}
+
+static void dummy_event_handler(int val)
+{
+	/* No action needed */
+}
+
+static int nanosleep_test_remaining(int clockid)
+{
+	struct timespec rqtp = {}, rmtp = {};
+	struct itimerspec itimer = {};
+	struct sigaction sa = {};
+	timer_t timer;
+	int ret;
+
+	sa.sa_handler = dummy_event_handler;
+	ret = sigaction(SIGALRM, &sa, NULL);
+	if (ret)
+		return KSFT_FAIL;
+
+	ret = timer_create(clockid, NULL, &timer);
+	if (ret)
+		return KSFT_FAIL;
+
+	itimer.it_value.tv_nsec = NSEC_PER_SEC / 4;
+	ret = timer_settime(timer, 0, &itimer, NULL);
+	if (ret)
+		return KSFT_FAIL;
+
+	rqtp.tv_nsec = NSEC_PER_SEC / 2;
+	ret = clock_nanosleep(clockid, 0, &rqtp, &rmtp);
+
+	if (timer_delete(timer)) {
+		ksft_exit_fail_msg("Unable to delete the timeout timer for %s. "
+				   "This might interfere with following testcases.\n",
+				   clock_name(clockid));
+	}
+
+	if (ret != EINTR)
+		return KSFT_FAIL;
+
+	sa.sa_handler = SIG_DFL;
+	ret = sigaction(SIGALRM, &sa, NULL);
+	if (ret)
+		return KSFT_FAIL;
+
+	if (!in_order((struct timespec) {}, rmtp))
+		return KSFT_FAIL;
+
+	if (!in_order(rmtp, rqtp))
+		return KSFT_FAIL;
+
+	return KSFT_PASS;
+}
+
+static void nanosleep_test_clock(clockid_t clockid)
+{
+	long long length = 10;
+	int ret;
+
+	while (length <= (NSEC_PER_SEC * 10)) {
+		ret = nanosleep_test(clockid, length);
+		if (ret != KSFT_PASS) {
+			ksft_test_result_report(ret, "%s\n", clock_name(clockid));
+			ksft_test_result_skip("%s (remaining)\n", clock_name(clockid));
+			return;
+		}
+
+		length *= 100;
+	}
+	ksft_test_result_pass("%s\n", clock_name(clockid));
+
+	ret = nanosleep_test_remaining(clockid);
+	ksft_test_result_report(ret, "%s (remaining)\n", clock_name(clockid));
+}
+
+int main(int argc, char **argv)
+{
+	int clockid;
+
+	static const clockid_t tested_clocks[] = {
+		CLOCK_REALTIME,
+		CLOCK_MONOTONIC,
+		CLOCK_BOOTTIME,
+		CLOCK_BOOTTIME_ALARM,
+		CLOCK_REALTIME_ALARM,
+		CLOCK_TAI,
+	};
+
+	ksft_print_header();
+	ksft_set_plan(ARRAY_SIZE(tested_clocks) * 2);
+
+	for (size_t clock_index = 0; clock_index < ARRAY_SIZE(tested_clocks); clock_index++) {
+		clockid = tested_clocks[clock_index];
+
+		fflush(stdout);
+
+		nanosleep_test_clock(clockid);
+	}
+	ksft_finished();
+}
diff --git a/tools/testing/selftests/timers/nsleep-lat.c b/tools/testing/selftests/timers/nsleep-lat.c
new file mode 100644
index 000000000..5de0051ac
--- /dev/null
+++ b/tools/testing/selftests/timers/nsleep-lat.c
@@ -0,0 +1,137 @@
+/* Measure nanosleep timer latency
+ *              by: john stultz (john.stultz@linaro.org)
+ *		(C) Copyright Linaro 2013
+ *              Licensed under the GPLv2
+ *
+ *  To build:
+ *	$ gcc nsleep-lat.c -o nsleep-lat -lrt
+ *
+ *   This program is free software: you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#include "clock-helpers.h"
+#include "kselftest.h"
+
+#define UNRESONABLE_LATENCY (40 * NSEC_PER_MSEC)
+
+struct timespec timespec_add(struct timespec ts, unsigned long long ns)
+{
+	ts.tv_nsec += ns;
+	while (ts.tv_nsec >= NSEC_PER_SEC) {
+		ts.tv_nsec -= NSEC_PER_SEC;
+		ts.tv_sec++;
+	}
+	return ts;
+}
+
+
+long long timespec_sub(struct timespec a, struct timespec b)
+{
+	long long ret = NSEC_PER_SEC * b.tv_sec + b.tv_nsec;
+
+	ret -= NSEC_PER_SEC * a.tv_sec + a.tv_nsec;
+	return ret;
+}
+
+int nanosleep_lat_test(int clockid, long long ns)
+{
+	struct timespec start, end, target;
+	long long latency = 0;
+	int i, count;
+
+	target.tv_sec = ns/NSEC_PER_SEC;
+	target.tv_nsec = ns%NSEC_PER_SEC;
+
+	if (clock_gettime(clockid, &start))
+		return KSFT_SKIP;
+	if (clock_nanosleep(clockid, 0, &target, NULL))
+		return KSFT_SKIP;
+
+	count = 10;
+
+	/* First check relative latency */
+	if (clock_gettime(clockid, &start))
+		return KSFT_FAIL;
+
+	for (i = 0; i < count; i++) {
+		if (clock_nanosleep(clockid, 0, &target, NULL))
+			return KSFT_FAIL;
+	}
+
+	if (clock_gettime(clockid, &end))
+		return KSFT_FAIL;
+
+	if (((timespec_sub(start, end)/count)-ns) > UNRESONABLE_LATENCY) {
+		ksft_print_msg("Large rel latency: %lld ns :", (timespec_sub(start, end)/count)-ns);
+		return KSFT_FAIL;
+	}
+
+	/* Next check absolute latency */
+	for (i = 0; i < count; i++) {
+		if (clock_gettime(clockid, &start))
+			return KSFT_FAIL;
+		target = timespec_add(start, ns);
+		if (clock_nanosleep(clockid, TIMER_ABSTIME, &target, NULL))
+			return KSFT_FAIL;
+		if (clock_gettime(clockid, &end))
+			return KSFT_FAIL;
+		latency += timespec_sub(target, end);
+	}
+
+	if (latency/count > UNRESONABLE_LATENCY) {
+		ksft_print_msg("Large abs latency: %lld ns :", latency/count);
+		return KSFT_FAIL;
+	}
+
+	return KSFT_PASS;
+}
+
+int main(int argc, char **argv)
+{
+	long long length;
+	int clockid, ret;
+
+	static const clockid_t tested_clocks[] = {
+		CLOCK_REALTIME,
+		CLOCK_MONOTONIC,
+		CLOCK_BOOTTIME,
+		CLOCK_BOOTTIME_ALARM,
+		CLOCK_REALTIME_ALARM,
+		CLOCK_TAI,
+	};
+
+	ksft_print_header();
+	ksft_set_plan(ARRAY_SIZE(tested_clocks));
+
+	for (size_t clock_index = 0; clock_index < ARRAY_SIZE(tested_clocks); clock_index++) {
+		clockid = tested_clocks[clock_index];
+
+		length = 10;
+		while (length <= (NSEC_PER_SEC * 10)) {
+			ret = nanosleep_lat_test(clockid, length);
+			if (ret)
+				break;
+			length *= 100;
+
+		}
+
+		ksft_test_result_report(ret, "%s\n", clock_name(clockid));
+	}
+
+	ksft_finished();
+}
diff --git a/tools/testing/selftests/timers/posix_timers.c b/tools/testing/selftests/timers/posix_timers.c
new file mode 100644
index 000000000..a92d4b957
--- /dev/null
+++ b/tools/testing/selftests/timers/posix_timers.c
@@ -0,0 +1,729 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Red Hat, Inc., Frederic Weisbecker <fweisbec@redhat.com>
+ *
+ * Selftests for a few posix timers interface.
+ *
+ * Kernel loop code stolen from Steven Rostedt <srostedt@redhat.com>
+ */
+#define _GNU_SOURCE
+#include <sys/prctl.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <stdio.h>
+#include <signal.h>
+#include <stdint.h>
+#include <string.h>
+#include <unistd.h>
+#include <time.h>
+#include <pthread.h>
+#include <stdbool.h>
+
+#include "clock-helpers.h"
+#include "kselftest.h"
+
+#define DELAY 2
+
+static void __fatal_error(const char *test, const char *name, const char *what)
+{
+	char buf[64];
+	char *ret_str = NULL;
+
+	ret_str = strerror_r(errno, buf, sizeof(buf));
+
+	if (name && strlen(name) && ret_str)
+		ksft_exit_fail_msg("%s %s %s %s\n", test, name, what, ret_str);
+	else if (ret_str)
+		ksft_exit_fail_msg("%s %s %s\n", test, what, ret_str);
+	else
+		ksft_exit_fail_msg("%s %s\n", test, what);
+
+}
+
+#define fatal_error(name, what)	__fatal_error(__func__, name, what)
+
+static volatile int done;
+
+/* Busy loop in userspace to elapse ITIMER_VIRTUAL */
+static void user_loop(void)
+{
+	while (!done);
+}
+
+/*
+ * Try to spend as much time as possible in kernelspace
+ * to elapse ITIMER_PROF.
+ */
+static void kernel_loop(void)
+{
+	void *addr = sbrk(0);
+	int err = 0;
+
+	while (!done && !err) {
+		err = brk(addr + 4096);
+		err |= brk(addr);
+	}
+}
+
+/*
+ * Sleep until ITIMER_REAL expiration.
+ */
+static void idle_loop(void)
+{
+	pause();
+}
+
+static void sig_handler(int nr)
+{
+	done = 1;
+}
+
+static inline int64_t calcdiff_ns(struct timespec t1, struct timespec t2)
+{
+	int64_t diff;
+
+	diff = NSEC_PER_SEC * (int64_t)((int) t1.tv_sec - (int) t2.tv_sec);
+	diff += ((int) t1.tv_nsec - (int) t2.tv_nsec);
+	return diff;
+}
+
+/*
+ * Check the expected timer expiration matches the GTOD elapsed delta since
+ * we armed the timer. Keep a 0.5 sec error margin due to various jitter.
+ */
+static int check_diff(struct timespec start, struct timespec end)
+{
+	long long diff = calcdiff_ns(end, start);
+
+	if (llabs(diff - DELAY * NSEC_PER_SEC) > NSEC_PER_SEC / 2) {
+		printf("Diff too high: %lld ns..", diff);
+		return -1;
+	}
+
+	return 0;
+}
+
+static void check_itimer(int which, const char *name)
+{
+	struct timespec start, end;
+	struct itimerval val = {
+		.it_value.tv_sec = DELAY,
+	};
+	int clock_id = CLOCK_REALTIME;
+
+	done = 0;
+
+	if (which == ITIMER_VIRTUAL)
+		signal(SIGVTALRM, sig_handler);
+	else if (which == ITIMER_PROF) {
+		clock_id = CLOCK_THREAD_CPUTIME_ID;
+		signal(SIGPROF, sig_handler);
+	}
+	else if (which == ITIMER_REAL)
+		signal(SIGALRM, sig_handler);
+
+	if (clock_gettime(clock_id, &start))
+		fatal_error(name, "clock_gettime()");
+
+	if (setitimer(which, &val, NULL) < 0)
+		fatal_error(name, "setitimer()");
+
+	if (which == ITIMER_VIRTUAL)
+		user_loop();
+	else if (which == ITIMER_PROF)
+		kernel_loop();
+	else if (which == ITIMER_REAL)
+		idle_loop();
+
+	if (clock_gettime(clock_id, &end))
+		fatal_error(name, "clock_gettime()");
+
+	ksft_test_result(check_diff(start, end) == 0, "%s\n", name);
+}
+
+static void check_timer_create(int which)
+{
+	const char *name = clock_name(which);
+	struct timespec start, end;
+	struct itimerspec val = {
+		.it_value.tv_sec = DELAY,
+	};
+	int clock_id = CLOCK_REALTIME;
+	timer_t id;
+
+	done = 0;
+
+	if (timer_create(which, NULL, &id) < 0)
+		fatal_error(name, "timer_create()");
+
+	if (signal(SIGALRM, sig_handler) == SIG_ERR)
+		fatal_error(name, "signal()");
+
+	if (clock_gettime(clock_id, &start))
+		fatal_error(name, "clock_gettime()");
+
+	if (timer_settime(id, 0, &val, NULL) < 0)
+		fatal_error(name, "timer_settime()");
+
+	user_loop();
+
+	if (clock_gettime(clock_id, &end))
+		fatal_error(name, "clock_gettime()");
+
+	ksft_test_result(check_diff(start, end) == 0,
+			 "timer_create() per %s\n", name);
+}
+
+static pthread_t ctd_thread;
+static volatile int ctd_count, ctd_failed;
+
+static void ctd_sighandler(int sig)
+{
+	if (pthread_self() != ctd_thread)
+		ctd_failed = 1;
+	ctd_count--;
+}
+
+static void *ctd_thread_func(void *arg)
+{
+	struct itimerspec val = {
+		.it_value.tv_sec = 0,
+		.it_value.tv_nsec = 1000 * 1000,
+		.it_interval.tv_sec = 0,
+		.it_interval.tv_nsec = 1000 * 1000,
+	};
+	timer_t id;
+
+	/* 1/10 seconds to ensure the leader sleeps */
+	usleep(10000);
+
+	ctd_count = 100;
+	if (timer_create(CLOCK_PROCESS_CPUTIME_ID, NULL, &id))
+		fatal_error(NULL, "timer_create()");
+	if (timer_settime(id, 0, &val, NULL))
+		fatal_error(NULL, "timer_settime()");
+	while (ctd_count > 0 && !ctd_failed)
+		;
+
+	if (timer_delete(id))
+		fatal_error(NULL, "timer_delete()");
+
+	return NULL;
+}
+
+/*
+ * Test that only the running thread receives the timer signal.
+ */
+static void check_timer_distribution(void)
+{
+	if (signal(SIGALRM, ctd_sighandler) == SIG_ERR)
+		fatal_error(NULL, "signal()");
+
+	if (pthread_create(&ctd_thread, NULL, ctd_thread_func, NULL))
+		fatal_error(NULL, "pthread_create()");
+
+	if (pthread_join(ctd_thread, NULL))
+		fatal_error(NULL, "pthread_join()");
+
+	if (!ctd_failed)
+		ksft_test_result_pass("check signal distribution\n");
+	else if (ksft_min_kernel_version(6, 3))
+		ksft_test_result_fail("check signal distribution\n");
+	else
+		ksft_test_result_skip("check signal distribution (old kernel)\n");
+}
+
+struct tmrsig {
+	int	signals;
+	int	overruns;
+};
+
+static void siginfo_handler(int sig, siginfo_t *si, void *uc)
+{
+	struct tmrsig *tsig = si ? si->si_ptr : NULL;
+
+	if (tsig) {
+		tsig->signals++;
+		tsig->overruns += si->si_overrun;
+	}
+}
+
+static void *ignore_thread(void *arg)
+{
+	unsigned int *tid = arg;
+	sigset_t set;
+
+	sigemptyset(&set);
+	sigaddset(&set, SIGUSR1);
+	if (sigprocmask(SIG_BLOCK, &set, NULL))
+		fatal_error(NULL, "sigprocmask(SIG_BLOCK)");
+
+	*tid = gettid();
+	sleep(100);
+
+	if (sigprocmask(SIG_UNBLOCK, &set, NULL))
+		fatal_error(NULL, "sigprocmask(SIG_UNBLOCK)");
+	return NULL;
+}
+
+static void check_sig_ign(int thread)
+{
+	struct tmrsig tsig = { };
+	struct itimerspec its;
+	unsigned int tid = 0;
+	struct sigaction sa;
+	struct sigevent sev;
+	pthread_t pthread;
+	timer_t timerid;
+	sigset_t set;
+
+	if (thread) {
+		if (pthread_create(&pthread, NULL, ignore_thread, &tid))
+			fatal_error(NULL, "pthread_create()");
+		sleep(1);
+	}
+
+	sa.sa_flags = SA_SIGINFO;
+	sa.sa_sigaction = siginfo_handler;
+	sigemptyset(&sa.sa_mask);
+	if (sigaction(SIGUSR1, &sa, NULL))
+		fatal_error(NULL, "sigaction()");
+
+	/* Block the signal */
+	sigemptyset(&set);
+	sigaddset(&set, SIGUSR1);
+	if (sigprocmask(SIG_BLOCK, &set, NULL))
+		fatal_error(NULL, "sigprocmask(SIG_BLOCK)");
+
+	memset(&sev, 0, sizeof(sev));
+	sev.sigev_notify = SIGEV_SIGNAL;
+	sev.sigev_signo = SIGUSR1;
+	sev.sigev_value.sival_ptr = &tsig;
+	if (thread) {
+		sev.sigev_notify = SIGEV_THREAD_ID;
+		sev._sigev_un._tid = tid;
+	}
+
+	if (timer_create(CLOCK_MONOTONIC, &sev, &timerid))
+		fatal_error(NULL, "timer_create()");
+
+	/* Start the timer to expire in 100ms and 100ms intervals */
+	its.it_value.tv_sec = 0;
+	its.it_value.tv_nsec = 100000000;
+	its.it_interval.tv_sec = 0;
+	its.it_interval.tv_nsec = 100000000;
+	timer_settime(timerid, 0, &its, NULL);
+
+	sleep(1);
+
+	/* Set the signal to be ignored */
+	if (signal(SIGUSR1, SIG_IGN) == SIG_ERR)
+		fatal_error(NULL, "signal(SIG_IGN)");
+
+	sleep(1);
+
+	if (thread) {
+		/* Stop the thread first. No signal should be delivered to it */
+		if (pthread_cancel(pthread))
+			fatal_error(NULL, "pthread_cancel()");
+		if (pthread_join(pthread, NULL))
+			fatal_error(NULL, "pthread_join()");
+	}
+
+	/* Restore the handler */
+	if (sigaction(SIGUSR1, &sa, NULL))
+		fatal_error(NULL, "sigaction()");
+
+	sleep(1);
+
+	/* Unblock it, which should deliver the signal in the !thread case*/
+	if (sigprocmask(SIG_UNBLOCK, &set, NULL))
+		fatal_error(NULL, "sigprocmask(SIG_UNBLOCK)");
+
+	if (timer_delete(timerid))
+		fatal_error(NULL, "timer_delete()");
+
+	if (!thread) {
+		ksft_test_result(tsig.signals == 1 && tsig.overruns == 29,
+				 "check_sig_ign SIGEV_SIGNAL\n");
+	} else {
+		ksft_test_result(tsig.signals == 0 && tsig.overruns == 0,
+				 "check_sig_ign SIGEV_THREAD_ID\n");
+	}
+}
+
+static void check_rearm(void)
+{
+	struct tmrsig tsig = { };
+	struct itimerspec its;
+	struct sigaction sa;
+	struct sigevent sev;
+	timer_t timerid;
+	sigset_t set;
+
+	sa.sa_flags = SA_SIGINFO;
+	sa.sa_sigaction = siginfo_handler;
+	sigemptyset(&sa.sa_mask);
+	if (sigaction(SIGUSR1, &sa, NULL))
+		fatal_error(NULL, "sigaction()");
+
+	/* Block the signal */
+	sigemptyset(&set);
+	sigaddset(&set, SIGUSR1);
+	if (sigprocmask(SIG_BLOCK, &set, NULL))
+		fatal_error(NULL, "sigprocmask(SIG_BLOCK)");
+
+	memset(&sev, 0, sizeof(sev));
+	sev.sigev_notify = SIGEV_SIGNAL;
+	sev.sigev_signo = SIGUSR1;
+	sev.sigev_value.sival_ptr = &tsig;
+	if (timer_create(CLOCK_MONOTONIC, &sev, &timerid))
+		fatal_error(NULL, "timer_create()");
+
+	/* Start the timer to expire in 100ms and 100ms intervals */
+	its.it_value.tv_sec = 0;
+	its.it_value.tv_nsec = 100000000;
+	its.it_interval.tv_sec = 0;
+	its.it_interval.tv_nsec = 100000000;
+	if (timer_settime(timerid, 0, &its, NULL))
+		fatal_error(NULL, "timer_settime()");
+
+	sleep(1);
+
+	/* Reprogram the timer to single shot */
+	its.it_value.tv_sec = 10;
+	its.it_value.tv_nsec = 0;
+	its.it_interval.tv_sec = 0;
+	its.it_interval.tv_nsec = 0;
+	if (timer_settime(timerid, 0, &its, NULL))
+		fatal_error(NULL, "timer_settime()");
+
+	/* Unblock it, which should not deliver a signal */
+	if (sigprocmask(SIG_UNBLOCK, &set, NULL))
+		fatal_error(NULL, "sigprocmask(SIG_UNBLOCK)");
+
+	if (timer_delete(timerid))
+		fatal_error(NULL, "timer_delete()");
+
+	ksft_test_result(!tsig.signals, "check_rearm\n");
+}
+
+static void check_delete(void)
+{
+	struct tmrsig tsig = { };
+	struct itimerspec its;
+	struct sigaction sa;
+	struct sigevent sev;
+	timer_t timerid;
+	sigset_t set;
+
+	sa.sa_flags = SA_SIGINFO;
+	sa.sa_sigaction = siginfo_handler;
+	sigemptyset(&sa.sa_mask);
+	if (sigaction(SIGUSR1, &sa, NULL))
+		fatal_error(NULL, "sigaction()");
+
+	/* Block the signal */
+	sigemptyset(&set);
+	sigaddset(&set, SIGUSR1);
+	if (sigprocmask(SIG_BLOCK, &set, NULL))
+		fatal_error(NULL, "sigprocmask(SIG_BLOCK)");
+
+	memset(&sev, 0, sizeof(sev));
+	sev.sigev_notify = SIGEV_SIGNAL;
+	sev.sigev_signo = SIGUSR1;
+	sev.sigev_value.sival_ptr = &tsig;
+	if (timer_create(CLOCK_MONOTONIC, &sev, &timerid))
+		fatal_error(NULL, "timer_create()");
+
+	/* Start the timer to expire in 100ms and 100ms intervals */
+	its.it_value.tv_sec = 0;
+	its.it_value.tv_nsec = 100000000;
+	its.it_interval.tv_sec = 0;
+	its.it_interval.tv_nsec = 100000000;
+	if (timer_settime(timerid, 0, &its, NULL))
+		fatal_error(NULL, "timer_settime()");
+
+	sleep(1);
+
+	if (timer_delete(timerid))
+		fatal_error(NULL, "timer_delete()");
+
+	/* Unblock it, which should not deliver a signal */
+	if (sigprocmask(SIG_UNBLOCK, &set, NULL))
+		fatal_error(NULL, "sigprocmask(SIG_UNBLOCK)");
+
+	ksft_test_result(!tsig.signals, "check_delete\n");
+}
+
+static void check_sigev_none(int which)
+{
+	const char *name = clock_name(which);
+	struct timespec start, now;
+	struct itimerspec its;
+	struct sigevent sev;
+	timer_t timerid;
+
+	memset(&sev, 0, sizeof(sev));
+	sev.sigev_notify = SIGEV_NONE;
+
+	if (timer_create(which, &sev, &timerid))
+		fatal_error(name, "timer_create()");
+
+	/* Start the timer to expire in 100ms and 100ms intervals */
+	its.it_value.tv_sec = 0;
+	its.it_value.tv_nsec = 100000000;
+	its.it_interval.tv_sec = 0;
+	its.it_interval.tv_nsec = 100000000;
+	timer_settime(timerid, 0, &its, NULL);
+
+	if (clock_gettime(which, &start))
+		fatal_error(name, "clock_gettime()");
+
+	do {
+		if (clock_gettime(which, &now))
+			fatal_error(name, "clock_gettime()");
+	} while (calcdiff_ns(now, start) < NSEC_PER_SEC);
+
+	if (timer_gettime(timerid, &its))
+		fatal_error(name, "timer_gettime()");
+
+	if (timer_delete(timerid))
+		fatal_error(name, "timer_delete()");
+
+	ksft_test_result(its.it_value.tv_sec || its.it_value.tv_nsec,
+			 "check_sigev_none %s\n", name);
+}
+
+static void check_gettime(int which)
+{
+	const char *name = clock_name(which);
+	struct itimerspec its, prev;
+	struct timespec start, now;
+	struct sigevent sev;
+	timer_t timerid;
+	int wraps = 0;
+	sigset_t set;
+
+	/* Block the signal */
+	sigemptyset(&set);
+	sigaddset(&set, SIGUSR1);
+	if (sigprocmask(SIG_BLOCK, &set, NULL))
+		fatal_error(name, "sigprocmask(SIG_BLOCK)");
+
+	memset(&sev, 0, sizeof(sev));
+	sev.sigev_notify = SIGEV_SIGNAL;
+	sev.sigev_signo = SIGUSR1;
+
+	if (timer_create(which, &sev, &timerid))
+		fatal_error(name, "timer_create()");
+
+	/* Start the timer to expire in 100ms and 100ms intervals */
+	its.it_value.tv_sec = 0;
+	its.it_value.tv_nsec = 100000000;
+	its.it_interval.tv_sec = 0;
+	its.it_interval.tv_nsec = 100000000;
+	if (timer_settime(timerid, 0, &its, NULL))
+		fatal_error(name, "timer_settime()");
+
+	if (timer_gettime(timerid, &prev))
+		fatal_error(name, "timer_gettime()");
+
+	if (clock_gettime(which, &start))
+		fatal_error(name, "clock_gettime()");
+
+	do {
+		if (clock_gettime(which, &now))
+			fatal_error(name, "clock_gettime()");
+		if (timer_gettime(timerid, &its))
+			fatal_error(name, "timer_gettime()");
+		if (its.it_value.tv_nsec > prev.it_value.tv_nsec)
+			wraps++;
+		prev = its;
+
+	} while (calcdiff_ns(now, start) < NSEC_PER_SEC);
+
+	if (timer_delete(timerid))
+		fatal_error(name, "timer_delete()");
+
+	ksft_test_result(wraps > 1, "check_gettime %s\n", name);
+}
+
+static void check_overrun(int which)
+{
+	const char *name = clock_name(which);
+	struct timespec start, now;
+	struct tmrsig tsig = { };
+	struct itimerspec its;
+	struct sigaction sa;
+	struct sigevent sev;
+	timer_t timerid;
+	sigset_t set;
+
+	sa.sa_flags = SA_SIGINFO;
+	sa.sa_sigaction = siginfo_handler;
+	sigemptyset(&sa.sa_mask);
+	if (sigaction(SIGUSR1, &sa, NULL))
+		fatal_error(name, "sigaction()");
+
+	/* Block the signal */
+	sigemptyset(&set);
+	sigaddset(&set, SIGUSR1);
+	if (sigprocmask(SIG_BLOCK, &set, NULL))
+		fatal_error(name, "sigprocmask(SIG_BLOCK)");
+
+	memset(&sev, 0, sizeof(sev));
+	sev.sigev_notify = SIGEV_SIGNAL;
+	sev.sigev_signo = SIGUSR1;
+	sev.sigev_value.sival_ptr = &tsig;
+	if (timer_create(which, &sev, &timerid))
+		fatal_error(name, "timer_create()");
+
+	/* Start the timer to expire in 100ms and 100ms intervals */
+	its.it_value.tv_sec = 0;
+	its.it_value.tv_nsec = 100000000;
+	its.it_interval.tv_sec = 0;
+	its.it_interval.tv_nsec = 100000000;
+	if (timer_settime(timerid, 0, &its, NULL))
+		fatal_error(name, "timer_settime()");
+
+	if (clock_gettime(which, &start))
+		fatal_error(name, "clock_gettime()");
+
+	do {
+		if (clock_gettime(which, &now))
+			fatal_error(name, "clock_gettime()");
+	} while (calcdiff_ns(now, start) < NSEC_PER_SEC);
+
+	/* Unblock it, which should deliver a signal */
+	if (sigprocmask(SIG_UNBLOCK, &set, NULL))
+		fatal_error(name, "sigprocmask(SIG_UNBLOCK)");
+
+	if (timer_delete(timerid))
+		fatal_error(name, "timer_delete()");
+
+	ksft_test_result(tsig.signals == 1 && tsig.overruns == 9,
+			 "check_overrun %s\n", name);
+}
+
+#include <sys/syscall.h>
+
+static int do_timer_create(int *id)
+{
+	return syscall(__NR_timer_create, CLOCK_MONOTONIC, NULL, id);
+}
+
+static int do_timer_delete(int id)
+{
+	return syscall(__NR_timer_delete, id);
+}
+
+#ifndef PR_TIMER_CREATE_RESTORE_IDS
+# define PR_TIMER_CREATE_RESTORE_IDS		77
+# define PR_TIMER_CREATE_RESTORE_IDS_OFF	 0
+# define PR_TIMER_CREATE_RESTORE_IDS_ON		 1
+# define PR_TIMER_CREATE_RESTORE_IDS_GET	 2
+#endif
+
+static void check_timer_create_exact(void)
+{
+	int id;
+
+	if (prctl(PR_TIMER_CREATE_RESTORE_IDS, PR_TIMER_CREATE_RESTORE_IDS_ON, 0, 0, 0)) {
+		switch (errno) {
+		case EINVAL:
+			ksft_test_result_skip("check timer create exact, not supported\n");
+			return;
+		default:
+			ksft_test_result_skip("check timer create exact, errno = %d\n", errno);
+			return;
+		}
+	}
+
+	if (prctl(PR_TIMER_CREATE_RESTORE_IDS, PR_TIMER_CREATE_RESTORE_IDS_GET, 0, 0, 0) != 1)
+		fatal_error(NULL, "prctl(GET) failed\n");
+
+	id = 8;
+	if (do_timer_create(&id) < 0)
+		fatal_error(NULL, "timer_create()");
+
+	if (do_timer_delete(id))
+		fatal_error(NULL, "timer_delete()");
+
+	if (prctl(PR_TIMER_CREATE_RESTORE_IDS, PR_TIMER_CREATE_RESTORE_IDS_OFF, 0, 0, 0))
+		fatal_error(NULL, "prctl(OFF)");
+
+	if (prctl(PR_TIMER_CREATE_RESTORE_IDS, PR_TIMER_CREATE_RESTORE_IDS_GET, 0, 0, 0) != 0)
+		fatal_error(NULL, "prctl(GET) failed\n");
+
+	if (id != 8) {
+		ksft_test_result_fail("check timer create exact %d != 8\n", id);
+		return;
+	}
+
+	/* Validate that it went back to normal mode and allocates ID 9 */
+	if (do_timer_create(&id) < 0)
+		fatal_error(NULL, "timer_create()");
+
+	if (do_timer_delete(id))
+		fatal_error(NULL, "timer_delete()");
+
+	if (id == 9)
+		ksft_test_result_pass("check timer create exact\n");
+	else
+		ksft_test_result_fail("check timer create exact. Disabling failed.\n");
+}
+
+int main(int argc, char **argv)
+{
+	bool run_sig_ign_tests = ksft_min_kernel_version(6, 13);
+
+	ksft_print_header();
+	if (run_sig_ign_tests) {
+		ksft_set_plan(19);
+	} else {
+		ksft_set_plan(10);
+	}
+
+	ksft_print_msg("Testing posix timers. False negative may happen on CPU execution \n");
+	ksft_print_msg("based timers if other threads run on the CPU...\n");
+
+	check_timer_create_exact();
+
+	check_itimer(ITIMER_VIRTUAL, "ITIMER_VIRTUAL");
+	check_itimer(ITIMER_PROF, "ITIMER_PROF");
+	check_itimer(ITIMER_REAL, "ITIMER_REAL");
+	check_timer_create(CLOCK_THREAD_CPUTIME_ID);
+
+	/*
+	 * It's unfortunately hard to reliably test a timer expiration
+	 * on parallel multithread cputime. We could arm it to expire
+	 * on DELAY * nr_threads, with nr_threads busy looping, then wait
+	 * the normal DELAY since the time is elapsing nr_threads faster.
+	 * But for that we need to ensure we have real physical free CPUs
+	 * to ensure true parallelism. So test only one thread until we
+	 * find a better solution.
+	 */
+	check_timer_create(CLOCK_PROCESS_CPUTIME_ID);
+	check_timer_distribution();
+
+	if (run_sig_ign_tests) {
+		check_sig_ign(0);
+		check_sig_ign(1);
+		check_rearm();
+		check_delete();
+		check_sigev_none(CLOCK_MONOTONIC);
+		check_sigev_none(CLOCK_PROCESS_CPUTIME_ID);
+		check_gettime(CLOCK_MONOTONIC);
+		check_gettime(CLOCK_PROCESS_CPUTIME_ID);
+		check_gettime(CLOCK_THREAD_CPUTIME_ID);
+	} else {
+		ksft_print_msg("Skipping SIG_IGN tests on kernel < 6.13\n");
+	}
+
+	check_overrun(CLOCK_MONOTONIC);
+	check_overrun(CLOCK_PROCESS_CPUTIME_ID);
+	check_overrun(CLOCK_THREAD_CPUTIME_ID);
+
+	ksft_finished();
+}
diff --git a/tools/testing/selftests/timers/raw_skew.c b/tools/testing/selftests/timers/raw_skew.c
new file mode 100644
index 000000000..0c87a8fb0
--- /dev/null
+++ b/tools/testing/selftests/timers/raw_skew.c
@@ -0,0 +1,145 @@
+/* CLOCK_MONOTONIC vs CLOCK_MONOTONIC_RAW skew test
+ *		by: john stultz (johnstul@us.ibm.com)
+ *		    John Stultz <john.stultz@linaro.org>
+ *		(C) Copyright IBM 2012
+ *		(C) Copyright Linaro Limited 2015
+ *		Licensed under the GPLv2
+ *
+ *  To build:
+ *	$ gcc raw_skew.c -o raw_skew -lrt
+ *
+ *   This program is free software: you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <time.h>
+#include "clock-helpers.h"
+#include "kselftest.h"
+
+#define shift_right(x, s) ({		\
+	__typeof__(x) __x = (x);	\
+	__typeof__(s) __s = (s);	\
+	__x < 0 ? -(-__x >> __s) : __x >> __s; \
+})
+
+long long llabs(long long val)
+{
+	if (val < 0)
+		val = -val;
+	return val;
+}
+
+unsigned long long ts_to_nsec(struct timespec ts)
+{
+	return ts.tv_sec * NSEC_PER_SEC + ts.tv_nsec;
+}
+
+struct timespec nsec_to_ts(long long ns)
+{
+	struct timespec ts;
+
+	ts.tv_sec = ns/NSEC_PER_SEC;
+	ts.tv_nsec = ns%NSEC_PER_SEC;
+	return ts;
+}
+
+long long diff_timespec(struct timespec start, struct timespec end)
+{
+	long long start_ns, end_ns;
+
+	start_ns = ts_to_nsec(start);
+	end_ns = ts_to_nsec(end);
+	return end_ns - start_ns;
+}
+
+void get_monotonic_and_raw(struct timespec *mon, struct timespec *raw)
+{
+	struct timespec start, mid, end;
+	long long diff = 0, tmp;
+	int i;
+
+	for (i = 0; i < 3; i++) {
+		long long newdiff;
+
+		clock_gettime(CLOCK_MONOTONIC, &start);
+		clock_gettime(CLOCK_MONOTONIC_RAW, &mid);
+		clock_gettime(CLOCK_MONOTONIC, &end);
+
+		newdiff = diff_timespec(start, end);
+		if (diff == 0 || newdiff < diff) {
+			diff = newdiff;
+			*raw = mid;
+			tmp = (ts_to_nsec(start) + ts_to_nsec(end))/2;
+			*mon = nsec_to_ts(tmp);
+		}
+	}
+}
+
+int main(int argc, char **argv)
+{
+	struct timespec mon, raw, start, end;
+	long long delta1, delta2, interval, eppm, ppm;
+	struct timex tx1, tx2;
+
+	setbuf(stdout, NULL);
+
+	if (clock_gettime(CLOCK_MONOTONIC_RAW, &raw)) {
+		printf("ERR: NO CLOCK_MONOTONIC_RAW\n");
+		return -1;
+	}
+
+	tx1.modes = 0;
+	adjtimex(&tx1);
+	get_monotonic_and_raw(&mon, &raw);
+	start = mon;
+	delta1 = diff_timespec(mon, raw);
+
+	if (tx1.offset)
+		printf("WARNING: ADJ_OFFSET in progress, this will cause inaccurate results\n");
+
+	printf("Estimating clock drift: ");
+	fflush(stdout);
+	sleep(120);
+
+	get_monotonic_and_raw(&mon, &raw);
+	end = mon;
+	tx2.modes = 0;
+	adjtimex(&tx2);
+	delta2 = diff_timespec(mon, raw);
+
+	interval = diff_timespec(start, end);
+
+	/* calculate measured ppm between MONOTONIC and MONOTONIC_RAW */
+	eppm = ((delta2-delta1)*NSEC_PER_SEC)/interval;
+	eppm = -eppm;
+	printf("%lld.%i(est)", eppm/1000, abs((int)(eppm%1000)));
+
+	/* Avg the two actual freq samples adjtimex gave us */
+	ppm = (long long)(tx1.freq + tx2.freq) * 1000 / 2;
+	ppm = shift_right(ppm, 16);
+	printf(" %lld.%i(act)", ppm/1000, abs((int)(ppm%1000)));
+
+	if (llabs(eppm - ppm) > 1000) {
+		if (tx1.offset || tx2.offset ||
+		    tx1.freq != tx2.freq || tx1.tick != tx2.tick) {
+			printf("	[SKIP]\n");
+			ksft_exit_skip("The clock was adjusted externally. Shutdown NTPd or other time sync daemons\n");
+		}
+		printf("	[FAILED]\n");
+		ksft_exit_fail();
+	}
+	printf("	[OK]\n");
+	ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/rtcpie.c b/tools/testing/selftests/timers/rtcpie.c
new file mode 100644
index 000000000..4ba42d198
--- /dev/null
+++ b/tools/testing/selftests/timers/rtcpie.c
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Real Time Clock Periodic Interrupt test program
+ *
+ * Since commit 6610e0893b8bc ("RTC: Rework RTC code to use timerqueue for
+ * events"), PIE are completely handled using hrtimers, without actually using
+ * any underlying hardware RTC.
+ *
+ */
+
+#include <stdio.h>
+#include <linux/rtc.h>
+#include <sys/ioctl.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <errno.h>
+
+#include "kselftest.h"
+
+/*
+ * This expects the new RTC class driver framework, working with
+ * clocks that will often not be clones of what the PC-AT had.
+ * Use the command line to specify another RTC if you need one.
+ */
+static const char default_rtc[] = "/dev/rtc0";
+
+int main(int argc, char **argv)
+{
+	int i, fd, retval;
+	unsigned long tmp, data, old_pie_rate;
+	const char *rtc = default_rtc;
+	struct timeval start, end, diff;
+
+	switch (argc) {
+	case 2:
+		rtc = argv[1];
+		break;
+	case 1:
+		fd = open(default_rtc, O_RDONLY);
+		if (fd == -1) {
+			printf("Default RTC %s does not exist. Test Skipped!\n", default_rtc);
+			exit(KSFT_SKIP);
+		}
+		close(fd);
+		break;
+	default:
+		fprintf(stderr, "usage:  rtctest [rtcdev] [d]\n");
+		return 1;
+	}
+
+	fd = open(rtc, O_RDONLY);
+
+	if (fd ==  -1) {
+		perror(rtc);
+		exit(errno);
+	}
+
+	/* Read periodic IRQ rate */
+	retval = ioctl(fd, RTC_IRQP_READ, &old_pie_rate);
+	if (retval == -1) {
+		/* not all RTCs support periodic IRQs */
+		if (errno == EINVAL) {
+			fprintf(stderr, "\nNo periodic IRQ support\n");
+			goto done;
+		}
+		perror("RTC_IRQP_READ ioctl");
+		exit(errno);
+	}
+	fprintf(stderr, "\nPeriodic IRQ rate is %ldHz.\n", old_pie_rate);
+
+	fprintf(stderr, "Counting 20 interrupts at:");
+	fflush(stderr);
+
+	/* The frequencies 128Hz, 256Hz, ... 8192Hz are only allowed for root. */
+	for (tmp=2; tmp<=64; tmp*=2) {
+
+		retval = ioctl(fd, RTC_IRQP_SET, tmp);
+		if (retval == -1) {
+			/* not all RTCs can change their periodic IRQ rate */
+			if (errno == EINVAL) {
+				fprintf(stderr,
+					"\n...Periodic IRQ rate is fixed\n");
+				goto done;
+			}
+			perror("RTC_IRQP_SET ioctl");
+			exit(errno);
+		}
+
+		fprintf(stderr, "\n%ldHz:\t", tmp);
+		fflush(stderr);
+
+		/* Enable periodic interrupts */
+		retval = ioctl(fd, RTC_PIE_ON, 0);
+		if (retval == -1) {
+			perror("RTC_PIE_ON ioctl");
+			exit(errno);
+		}
+
+		for (i=1; i<21; i++) {
+			gettimeofday(&start, NULL);
+			/* This blocks */
+			retval = read(fd, &data, sizeof(unsigned long));
+			if (retval == -1) {
+				perror("read");
+				exit(errno);
+			}
+			gettimeofday(&end, NULL);
+			timersub(&end, &start, &diff);
+			if (diff.tv_sec > 0 ||
+			    diff.tv_usec > ((1000000L / tmp) * 1.10)) {
+				fprintf(stderr, "\nPIE delta error: %ld.%06ld should be close to 0.%06ld\n",
+				       diff.tv_sec, diff.tv_usec,
+				       (1000000L / tmp));
+				fflush(stdout);
+				exit(-1);
+			}
+
+			fprintf(stderr, " %d",i);
+			fflush(stderr);
+		}
+
+		/* Disable periodic interrupts */
+		retval = ioctl(fd, RTC_PIE_OFF, 0);
+		if (retval == -1) {
+			perror("RTC_PIE_OFF ioctl");
+			exit(errno);
+		}
+	}
+
+done:
+	ioctl(fd, RTC_IRQP_SET, old_pie_rate);
+
+	fprintf(stderr, "\n\n\t\t\t *** Test complete ***\n");
+
+	close(fd);
+
+	return 0;
+}
diff --git a/tools/testing/selftests/timers/set-2038.c b/tools/testing/selftests/timers/set-2038.c
new file mode 100644
index 000000000..f522a3035
--- /dev/null
+++ b/tools/testing/selftests/timers/set-2038.c
@@ -0,0 +1,132 @@
+/* Time bounds setting test
+ *		by: john stultz (johnstul@us.ibm.com)
+ *		(C) Copyright IBM 2012
+ *		Licensed under the GPLv2
+ *
+ *  NOTE: This is a meta-test which sets the time to edge cases then
+ *  uses other tests to detect problems. Thus this test requires that
+ *  the inconsistency-check and nanosleep tests be present in the same
+ *  directory it is run from.
+ *
+ *  To build:
+ *	$ gcc set-2038.c -o set-2038 -lrt
+ *
+ *   This program is free software: you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <time.h>
+#include <sys/time.h>
+#include "clock-helpers.h"
+#include "kselftest.h"
+
+#define KTIME_MAX	((long long)~((unsigned long long)1 << 63))
+#define KTIME_SEC_MAX	(KTIME_MAX / NSEC_PER_SEC)
+
+#define YEAR_1901 (-0x7fffffffL)
+#define YEAR_1970 1
+#define YEAR_2038 0x7fffffffL			/*overflows 32bit time_t */
+#define YEAR_2262 KTIME_SEC_MAX			/*overflows 64bit ktime_t */
+#define YEAR_MAX  ((long long)((1ULL<<63)-1))	/*overflows 64bit time_t */
+
+int is32bits(void)
+{
+	return (sizeof(long) == 4);
+}
+
+int settime(long long time)
+{
+	struct timeval now;
+	int ret;
+
+	now.tv_sec = (time_t)time;
+	now.tv_usec  = 0;
+
+	ret = settimeofday(&now, NULL);
+
+	printf("Setting time to 0x%lx: %d\n", (long)time, ret);
+	return ret;
+}
+
+int do_tests(void)
+{
+	int ret;
+
+	ret = system("date");
+	ret = system("./inconsistency-check -c 0 -t 20");
+	ret |= system("./nanosleep");
+	ret |= system("./nsleep-lat");
+	return ret;
+
+}
+
+int main(int argc, char *argv[])
+{
+	int ret = 0;
+	int opt, dangerous = 0;
+	time_t start;
+
+	/* Process arguments */
+	while ((opt = getopt(argc, argv, "d")) != -1) {
+		switch (opt) {
+		case 'd':
+			dangerous = 1;
+		}
+	}
+
+	start = time(0);
+
+	/* First test that crazy values don't work */
+	if (!settime(YEAR_1901)) {
+		ret = -1;
+		goto out;
+	}
+	if (!settime(YEAR_MAX)) {
+		ret = -1;
+		goto out;
+	}
+	if (!is32bits() && !settime(YEAR_2262)) {
+		ret = -1;
+		goto out;
+	}
+
+	/* Now test behavior near edges */
+	settime(YEAR_1970);
+	ret = do_tests();
+	if (ret)
+		goto out;
+
+	settime(YEAR_2038 - 600);
+	ret = do_tests();
+	if (ret)
+		goto out;
+
+	/* The rest of the tests can blowup on 32bit systems */
+	if (is32bits() && !dangerous)
+		goto out;
+	/* Test rollover behavior 32bit edge */
+	settime(YEAR_2038 - 10);
+	ret = do_tests();
+	if (ret)
+		goto out;
+
+	settime(YEAR_2262 - 600);
+	ret = do_tests();
+
+out:
+	/* restore clock */
+	settime(start);
+	if (ret)
+		ksft_exit_fail();
+	ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/set-tai.c b/tools/testing/selftests/timers/set-tai.c
new file mode 100644
index 000000000..e283c0428
--- /dev/null
+++ b/tools/testing/selftests/timers/set-tai.c
@@ -0,0 +1,69 @@
+/* Set tai offset
+ *              by: John Stultz <john.stultz@linaro.org>
+ *              (C) Copyright Linaro 2013
+ *              Licensed under the GPLv2
+ *
+ *   This program is free software: you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ */
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#include <unistd.h>
+#include "kselftest.h"
+
+int set_tai(int offset)
+{
+	struct timex tx;
+
+	memset(&tx, 0, sizeof(tx));
+
+	tx.modes = ADJ_TAI;
+	tx.constant = offset;
+
+	return adjtimex(&tx);
+}
+
+int get_tai(void)
+{
+	struct timex tx;
+
+	memset(&tx, 0, sizeof(tx));
+
+	adjtimex(&tx);
+	return tx.tai;
+}
+
+int main(int argc, char **argv)
+{
+	int i, ret;
+
+	ret = get_tai();
+	printf("tai offset started at %i\n", ret);
+
+	printf("Checking tai offsets can be properly set: ");
+	fflush(stdout);
+	for (i = 1; i <= 60; i++) {
+		ret = set_tai(i);
+		ret = get_tai();
+		if (ret != i) {
+			printf("[FAILED] expected: %i got %i\n", i, ret);
+			ksft_exit_fail();
+		}
+	}
+	printf("[OK]\n");
+	ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/set-timer-lat.c b/tools/testing/selftests/timers/set-timer-lat.c
new file mode 100644
index 000000000..79ddba25d
--- /dev/null
+++ b/tools/testing/selftests/timers/set-timer-lat.c
@@ -0,0 +1,242 @@
+/* set_timer latency test
+ *		John Stultz (john.stultz@linaro.org)
+ *              (C) Copyright Linaro 2014
+ *              Licensed under the GPLv2
+ *
+ *   This test makes sure the set_timer api is correct
+ *
+ *  To build:
+ *	$ gcc set-timer-lat.c -o set-timer-lat -lrt
+ *
+ *   This program is free software: you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ */
+
+
+#include <errno.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <time.h>
+#include <string.h>
+#include <signal.h>
+#include <stdlib.h>
+#include <pthread.h>
+#include "clock-helpers.h"
+#include "kselftest.h"
+
+/* CLOCK_HWSPECIFIC == CLOCK_SGI_CYCLE (Deprecated) */
+#define CLOCK_HWSPECIFIC		10
+
+#define UNRESONABLE_LATENCY 40000000 /* 40ms in nanosecs */
+
+#define TIMER_SECS 1
+int alarmcount;
+int clock_id;
+struct timespec start_time;
+long long max_latency_ns;
+int timer_fired_early;
+
+long long timespec_sub(struct timespec a, struct timespec b)
+{
+	long long ret = NSEC_PER_SEC * b.tv_sec + b.tv_nsec;
+
+	ret -= NSEC_PER_SEC * a.tv_sec + a.tv_nsec;
+	return ret;
+}
+
+
+void sigalarm(int signo)
+{
+	long long delta_ns;
+	struct timespec ts;
+
+	clock_gettime(clock_id, &ts);
+	alarmcount++;
+
+	delta_ns = timespec_sub(start_time, ts);
+	delta_ns -= NSEC_PER_SEC * TIMER_SECS * alarmcount;
+
+	if (delta_ns < 0)
+		timer_fired_early = 1;
+
+	if (delta_ns > max_latency_ns)
+		max_latency_ns = delta_ns;
+}
+
+void describe_timer(int flags, int interval)
+{
+	printf("%-22s %s %s ",
+			clock_name(clock_id),
+			flags ? "ABSTIME":"RELTIME",
+			interval ? "PERIODIC":"ONE-SHOT");
+}
+
+int setup_timer(int clock_id, int flags, int interval, timer_t *tm1)
+{
+	struct sigevent se;
+	struct itimerspec its1, its2;
+	int err;
+
+	/* Set up timer: */
+	memset(&se, 0, sizeof(se));
+	se.sigev_notify = SIGEV_SIGNAL;
+	se.sigev_signo = SIGRTMAX;
+	se.sigev_value.sival_int = 0;
+
+	max_latency_ns = 0;
+	alarmcount = 0;
+	timer_fired_early = 0;
+
+	err = timer_create(clock_id, &se, tm1);
+	if (err) {
+		if ((clock_id == CLOCK_REALTIME_ALARM) ||
+		    (clock_id == CLOCK_BOOTTIME_ALARM)) {
+			printf("%-22s %s missing CAP_WAKE_ALARM?    : [UNSUPPORTED]\n",
+					clock_name(clock_id),
+					flags ? "ABSTIME":"RELTIME");
+			/* Indicate timer isn't set, so caller doesn't wait */
+			return 1;
+		}
+		printf("%s - timer_create() failed\n", clock_name(clock_id));
+		return -1;
+	}
+
+	clock_gettime(clock_id, &start_time);
+	if (flags) {
+		its1.it_value = start_time;
+		its1.it_value.tv_sec += TIMER_SECS;
+	} else {
+		its1.it_value.tv_sec = TIMER_SECS;
+		its1.it_value.tv_nsec = 0;
+	}
+	its1.it_interval.tv_sec = interval;
+	its1.it_interval.tv_nsec = 0;
+
+	err = timer_settime(*tm1, flags, &its1, &its2);
+	if (err) {
+		printf("%s - timer_settime() failed\n", clock_name(clock_id));
+		return -1;
+	}
+
+	return 0;
+}
+
+int check_timer_latency(int flags, int interval)
+{
+	int err = 0;
+
+	describe_timer(flags, interval);
+	printf("timer fired early: %7d : ", timer_fired_early);
+	if (!timer_fired_early) {
+		printf("[OK]\n");
+	} else {
+		printf("[FAILED]\n");
+		err = -1;
+	}
+
+	describe_timer(flags, interval);
+	printf("max latency: %10lld ns : ", max_latency_ns);
+
+	if (max_latency_ns < UNRESONABLE_LATENCY) {
+		printf("[OK]\n");
+	} else {
+		printf("[FAILED]\n");
+		err = -1;
+	}
+	return err;
+}
+
+int check_alarmcount(int flags, int interval)
+{
+	describe_timer(flags, interval);
+	printf("count: %19d : ", alarmcount);
+	if (alarmcount == 1) {
+		printf("[OK]\n");
+		return 0;
+	}
+	printf("[FAILED]\n");
+	return -1;
+}
+
+int do_timer(int clock_id, int flags)
+{
+	timer_t tm1;
+	const int interval = TIMER_SECS;
+	int err;
+
+	err = setup_timer(clock_id, flags, interval, &tm1);
+	/* Unsupported case - return 0 to not fail the test */
+	if (err)
+		return err == 1 ? 0 : err;
+
+	while (alarmcount < 5)
+		sleep(1);
+
+	timer_delete(tm1);
+	return check_timer_latency(flags, interval);
+}
+
+int do_timer_oneshot(int clock_id, int flags)
+{
+	timer_t tm1;
+	const int interval = 0;
+	struct timeval timeout;
+	int err;
+
+	err = setup_timer(clock_id, flags, interval, &tm1);
+	/* Unsupported case - return 0 to not fail the test */
+	if (err)
+		return err == 1 ? 0 : err;
+
+	memset(&timeout, 0, sizeof(timeout));
+	timeout.tv_sec = 5;
+	do {
+		err = select(0, NULL, NULL, NULL, &timeout);
+	} while (err == -1 && errno == EINTR);
+
+	timer_delete(tm1);
+	err = check_timer_latency(flags, interval);
+	err |= check_alarmcount(flags, interval);
+	return err;
+}
+
+int main(void)
+{
+	struct sigaction act;
+	int signum = SIGRTMAX;
+	int ret = 0;
+	int max_clocks = CLOCK_TAI + 1;
+
+	/* Set up signal handler: */
+	sigfillset(&act.sa_mask);
+	act.sa_flags = 0;
+	act.sa_handler = sigalarm;
+	sigaction(signum, &act, NULL);
+
+	printf("Setting timers for every %i seconds\n", TIMER_SECS);
+	for (clock_id = 0; clock_id < max_clocks; clock_id++) {
+
+		if ((clock_id == CLOCK_PROCESS_CPUTIME_ID) ||
+				(clock_id == CLOCK_THREAD_CPUTIME_ID) ||
+				(clock_id == CLOCK_MONOTONIC_RAW) ||
+				(clock_id == CLOCK_REALTIME_COARSE) ||
+				(clock_id == CLOCK_MONOTONIC_COARSE) ||
+				(clock_id == CLOCK_HWSPECIFIC))
+			continue;
+
+		ret |= do_timer(clock_id, TIMER_ABSTIME);
+		ret |= do_timer(clock_id, 0);
+		ret |= do_timer_oneshot(clock_id, TIMER_ABSTIME);
+		ret |= do_timer_oneshot(clock_id, 0);
+	}
+	if (ret)
+		ksft_exit_fail();
+	ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/set-tz.c b/tools/testing/selftests/timers/set-tz.c
new file mode 100644
index 000000000..334f36c0e
--- /dev/null
+++ b/tools/testing/selftests/timers/set-tz.c
@@ -0,0 +1,110 @@
+/* Set tz value
+ *              by: John Stultz <john.stultz@linaro.org>
+ *              (C) Copyright Linaro 2016
+ *              Licensed under the GPLv2
+ *
+ *   This program is free software: you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ */
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#include <unistd.h>
+#include "kselftest.h"
+
+int set_tz(int min, int dst)
+{
+	struct timezone tz;
+
+	tz.tz_minuteswest = min;
+	tz.tz_dsttime = dst;
+
+	return settimeofday(0, &tz);
+}
+
+int get_tz_min(void)
+{
+	struct timezone tz;
+	struct timeval tv;
+
+	memset(&tz, 0, sizeof(tz));
+	gettimeofday(&tv, &tz);
+	return tz.tz_minuteswest;
+}
+
+int get_tz_dst(void)
+{
+	struct timezone tz;
+	struct timeval tv;
+
+	memset(&tz, 0, sizeof(tz));
+	gettimeofday(&tv, &tz);
+	return tz.tz_dsttime;
+}
+
+int main(int argc, char **argv)
+{
+	int i, ret;
+	int min, dst;
+
+	min = get_tz_min();
+	dst = get_tz_dst();
+	printf("tz_minuteswest started at %i, dst at %i\n", min, dst);
+
+	printf("Checking tz_minuteswest can be properly set: ");
+	fflush(stdout);
+	for (i = -15*60; i < 15*60; i += 30) {
+		ret = set_tz(i, dst);
+		ret = get_tz_min();
+		if (ret != i) {
+			printf("[FAILED] expected: %i got %i\n", i, ret);
+			goto err;
+		}
+	}
+	printf("[OK]\n");
+
+	printf("Checking invalid tz_minuteswest values are caught: ");
+	fflush(stdout);
+
+	if (!set_tz(-15*60-1, dst)) {
+		printf("[FAILED] %i didn't return failure!\n", -15*60-1);
+		goto err;
+	}
+
+	if (!set_tz(15*60+1, dst)) {
+		printf("[FAILED] %i didn't return failure!\n", 15*60+1);
+		goto err;
+	}
+
+	if (!set_tz(-24*60, dst)) {
+		printf("[FAILED] %i didn't return failure!\n", -24*60);
+		goto err;
+	}
+
+	if (!set_tz(24*60, dst)) {
+		printf("[FAILED] %i didn't return failure!\n", 24*60);
+		goto err;
+	}
+
+	printf("[OK]\n");
+
+	set_tz(min, dst);
+	ksft_exit_pass();
+
+err:
+	set_tz(min, dst);
+	ksft_exit_fail();
+}
diff --git a/tools/testing/selftests/timers/settings b/tools/testing/selftests/timers/settings
new file mode 100644
index 000000000..e7b941753
--- /dev/null
+++ b/tools/testing/selftests/timers/settings
@@ -0,0 +1 @@
+timeout=0
diff --git a/tools/testing/selftests/timers/skew_consistency.c b/tools/testing/selftests/timers/skew_consistency.c
new file mode 100644
index 000000000..53ee5d710
--- /dev/null
+++ b/tools/testing/selftests/timers/skew_consistency.c
@@ -0,0 +1,75 @@
+/* ADJ_FREQ Skew consistency test
+ *		by: john stultz (johnstul@us.ibm.com)
+ *		(C) Copyright IBM 2012
+ *		Licensed under the GPLv2
+ *
+ *  NOTE: This is a meta-test which cranks the ADJ_FREQ knob back
+ *  and forth and watches for consistency problems. Thus this test requires
+ *  that the inconsistency-check tests be present in the same directory it
+ *  is run from.
+ *
+ *  To build:
+ *	$ gcc skew_consistency.c -o skew_consistency -lrt
+ *
+ *   This program is free software: you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ */
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <time.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <string.h>
+#include <sys/wait.h>
+#include "kselftest.h"
+
+int main(int argc, char **argv)
+{
+	struct timex tx;
+	int ret, ppm;
+	pid_t pid;
+
+
+	printf("Running Asynchronous Frequency Changing Tests...\n");
+
+	pid = fork();
+	if (!pid)
+		return system("./inconsistency-check -t 60");
+
+	ppm = 500;
+	ret = 0;
+
+	while (pid != waitpid(pid, &ret, WNOHANG)) {
+		ppm = -ppm;
+		tx.modes = ADJ_FREQUENCY;
+		tx.freq = ppm << 16;
+		adjtimex(&tx);
+		usleep(500000);
+	}
+
+	/* Set things back */
+	tx.modes = ADJ_FREQUENCY;
+	tx.offset = 0;
+	adjtimex(&tx);
+
+
+	if (ret) {
+		printf("[FAILED]\n");
+		ksft_exit_fail();
+	}
+	printf("[OK]\n");
+	ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/threadtest.c b/tools/testing/selftests/timers/threadtest.c
new file mode 100644
index 000000000..60b8b21bf
--- /dev/null
+++ b/tools/testing/selftests/timers/threadtest.c
@@ -0,0 +1,193 @@
+/* threadtest.c
+ *		by: john stultz (johnstul@us.ibm.com)
+ *		(C) Copyright IBM 2004, 2005, 2006, 2012
+ *		Licensed under the GPLv2
+ *
+ *  To build:
+ *	$ gcc threadtest.c -o threadtest -lrt
+ *
+ *   This program is free software: you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ */
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <sys/time.h>
+#include <pthread.h>
+#include "kselftest.h"
+
+/* serializes shared list access */
+pthread_mutex_t list_lock = PTHREAD_MUTEX_INITIALIZER;
+/* serializes console output */
+pthread_mutex_t print_lock = PTHREAD_MUTEX_INITIALIZER;
+
+
+#define MAX_THREADS 128
+#define LISTSIZE 128
+
+int done = 0;
+
+struct timespec global_list[LISTSIZE];
+int listcount = 0;
+
+
+void checklist(const struct timespec *list, int size)
+{
+	int i, j;
+	const struct timespec *a, *b;
+
+	/* scan the list */
+	for (i = 0; i < size-1; i++) {
+		a = &list[i];
+		b = &list[i+1];
+
+		/* look for any time inconsistencies */
+		if ((b->tv_sec <= a->tv_sec) &&
+			(b->tv_nsec < a->tv_nsec)) {
+
+			/* flag other threads */
+			done = 1;
+
+			/*serialize printing to avoid junky output*/
+			pthread_mutex_lock(&print_lock);
+
+			/* dump the list */
+			printf("\n");
+			for (j = 0; j < size; j++) {
+				if (j == i)
+					printf("---------------\n");
+				printf("%lu:%lu\n", list[j].tv_sec, list[j].tv_nsec);
+				if (j == i+1)
+					printf("---------------\n");
+			}
+			printf("[FAILED]\n");
+
+			pthread_mutex_unlock(&print_lock);
+		}
+	}
+}
+
+/* The shared thread shares a global list
+ * that each thread fills while holding the lock.
+ * This stresses clock synchronization across cpus.
+ */
+void *shared_thread(void *arg)
+{
+	while (!done) {
+		/* protect the list */
+		pthread_mutex_lock(&list_lock);
+
+		/* see if we're ready to check the list */
+		if (listcount >= LISTSIZE) {
+			checklist(global_list, LISTSIZE);
+			listcount = 0;
+		}
+		clock_gettime(CLOCK_MONOTONIC, &global_list[listcount++]);
+
+		pthread_mutex_unlock(&list_lock);
+	}
+	return NULL;
+}
+
+
+/* Each independent thread fills in its own
+ * list. This stresses clock_gettime() lock contention.
+ */
+void *independent_thread(void *arg)
+{
+	struct timespec my_list[LISTSIZE];
+	int count;
+
+	while (!done) {
+		/* fill the list */
+		for (count = 0; count < LISTSIZE; count++)
+			clock_gettime(CLOCK_MONOTONIC, &my_list[count]);
+		checklist(my_list, LISTSIZE);
+	}
+	return NULL;
+}
+
+#define DEFAULT_THREAD_COUNT 8
+#define DEFAULT_RUNTIME 30
+
+int main(int argc, char **argv)
+{
+	int thread_count, i;
+	time_t start, now, runtime;
+	char buf[255];
+	pthread_t pth[MAX_THREADS];
+	int opt;
+	void *tret;
+	int ret = 0;
+	void *(*thread)(void *) = shared_thread;
+
+	thread_count = DEFAULT_THREAD_COUNT;
+	runtime = DEFAULT_RUNTIME;
+
+	/* Process arguments */
+	while ((opt = getopt(argc, argv, "t:n:i")) != -1) {
+		switch (opt) {
+		case 't':
+			runtime = atoi(optarg);
+			break;
+		case 'n':
+			thread_count = atoi(optarg);
+			break;
+		case 'i':
+			thread = independent_thread;
+			printf("using independent threads\n");
+			break;
+		default:
+			printf("Usage: %s [-t <secs>] [-n <numthreads>] [-i]\n", argv[0]);
+			printf("	-t: time to run\n");
+			printf("	-n: number of threads\n");
+			printf("	-i: use independent threads\n");
+			return -1;
+		}
+	}
+
+	if (thread_count > MAX_THREADS)
+		thread_count = MAX_THREADS;
+
+
+	setbuf(stdout, NULL);
+
+	start = time(0);
+	strftime(buf, 255, "%a, %d %b %Y %T %z", localtime(&start));
+	printf("%s\n", buf);
+	printf("Testing consistency with %i threads for %ld seconds: ", thread_count, runtime);
+	fflush(stdout);
+
+	/* spawn */
+	for (i = 0; i < thread_count; i++)
+		pthread_create(&pth[i], 0, thread, 0);
+
+	while (time(&now) < start + runtime) {
+		sleep(1);
+		if (done) {
+			ret = 1;
+			strftime(buf, 255, "%a, %d %b %Y %T %z", localtime(&now));
+			printf("%s\n", buf);
+			goto out;
+		}
+	}
+	printf("[OK]\n");
+	done = 1;
+
+out:
+	/* wait */
+	for (i = 0; i < thread_count; i++)
+		pthread_join(pth[i], &tret);
+
+	/* die */
+	if (ret)
+		ksft_exit_fail();
+	ksft_exit_pass();
+}
diff --git a/tools/testing/selftests/timers/valid-adjtimex.c b/tools/testing/selftests/timers/valid-adjtimex.c
new file mode 100644
index 000000000..f641d5fb0
--- /dev/null
+++ b/tools/testing/selftests/timers/valid-adjtimex.c
@@ -0,0 +1,327 @@
+/* valid adjtimex test
+ *              by: John Stultz <john.stultz@linaro.org>
+ *              (C) Copyright Linaro 2015
+ *              Licensed under the GPLv2
+ *
+ *  This test validates adjtimex interface with valid
+ *  and invalid test data.
+ *
+ *  Usage: valid-adjtimex
+ *
+ *  To build:
+ *	$ gcc valid-adjtimex.c -o valid-adjtimex -lrt
+ *
+ *   This program is free software: you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ */
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#include <unistd.h>
+#include "clock-helpers.h"
+#include "kselftest.h"
+
+#define ADJ_SETOFFSET 0x0100
+
+#include <sys/syscall.h>
+int clock_adjtime(clockid_t id, struct timex *tx)
+{
+	return syscall(__NR_clock_adjtime, id, tx);
+}
+
+
+/* clear NTP time_status & time_state */
+int clear_time_state(void)
+{
+	struct timex tx;
+	int ret;
+
+	tx.modes = ADJ_STATUS;
+	tx.status = 0;
+	ret = adjtimex(&tx);
+	return ret;
+}
+
+#define NUM_FREQ_VALID 32
+#define NUM_FREQ_OUTOFRANGE 4
+#define NUM_FREQ_INVALID 2
+
+#define SHIFTED_PPM (1 << 16)
+
+long valid_freq[NUM_FREQ_VALID] = {
+	 -499 * SHIFTED_PPM,
+	 -450 * SHIFTED_PPM,
+	 -400 * SHIFTED_PPM,
+	 -350 * SHIFTED_PPM,
+	 -300 * SHIFTED_PPM,
+	 -250 * SHIFTED_PPM,
+	 -200 * SHIFTED_PPM,
+	 -150 * SHIFTED_PPM,
+	 -100 * SHIFTED_PPM,
+	  -75 * SHIFTED_PPM,
+	  -50 * SHIFTED_PPM,
+	  -25 * SHIFTED_PPM,
+	  -10 * SHIFTED_PPM,
+	   -5 * SHIFTED_PPM,
+	   -1 * SHIFTED_PPM,
+	-1000,
+	    1 * SHIFTED_PPM,
+	    5 * SHIFTED_PPM,
+	   10 * SHIFTED_PPM,
+	   25 * SHIFTED_PPM,
+	   50 * SHIFTED_PPM,
+	   75 * SHIFTED_PPM,
+	  100 * SHIFTED_PPM,
+	  150 * SHIFTED_PPM,
+	  200 * SHIFTED_PPM,
+	  250 * SHIFTED_PPM,
+	  300 * SHIFTED_PPM,
+	  350 * SHIFTED_PPM,
+	  400 * SHIFTED_PPM,
+	  450 * SHIFTED_PPM,
+	  499 * SHIFTED_PPM,
+};
+
+long outofrange_freq[NUM_FREQ_OUTOFRANGE] = {
+	-1000 * SHIFTED_PPM,
+	 -550 * SHIFTED_PPM,
+	  550 * SHIFTED_PPM,
+	 1000 * SHIFTED_PPM,
+};
+
+#define LONG_MAX (~0UL>>1)
+#define LONG_MIN (-LONG_MAX - 1)
+
+long invalid_freq[NUM_FREQ_INVALID] = {
+	LONG_MAX,
+	LONG_MIN,
+};
+
+int validate_freq(void)
+{
+	struct timex tx;
+	int ret, pass = 0;
+	int i;
+
+	clear_time_state();
+
+	memset(&tx, 0, sizeof(struct timex));
+	/* Set the leap second insert flag */
+
+	printf("Testing ADJ_FREQ... ");
+	fflush(stdout);
+	for (i = 0; i < NUM_FREQ_VALID; i++) {
+		tx.modes = ADJ_FREQUENCY;
+		tx.freq = valid_freq[i];
+
+		ret = adjtimex(&tx);
+		if (ret < 0) {
+			printf("[FAIL]\n");
+			printf("Error: adjtimex(ADJ_FREQ, %ld - %ld ppm\n",
+				valid_freq[i], valid_freq[i]>>16);
+			pass = -1;
+			goto out;
+		}
+		tx.modes = 0;
+		ret = adjtimex(&tx);
+		if (tx.freq != valid_freq[i]) {
+			printf("Warning: freq value %ld not what we set it (%ld)!\n",
+					tx.freq, valid_freq[i]);
+		}
+	}
+	for (i = 0; i < NUM_FREQ_OUTOFRANGE; i++) {
+		tx.modes = ADJ_FREQUENCY;
+		tx.freq = outofrange_freq[i];
+
+		ret = adjtimex(&tx);
+		if (ret < 0) {
+			printf("[FAIL]\n");
+			printf("Error: adjtimex(ADJ_FREQ, %ld - %ld ppm\n",
+				outofrange_freq[i], outofrange_freq[i]>>16);
+			pass = -1;
+			goto out;
+		}
+		tx.modes = 0;
+		ret = adjtimex(&tx);
+		if (tx.freq == outofrange_freq[i]) {
+			printf("[FAIL]\n");
+			printf("ERROR: out of range value %ld actually set!\n",
+					tx.freq);
+			pass = -1;
+			goto out;
+		}
+	}
+
+
+	if (sizeof(long) == 8) { /* this case only applies to 64bit systems */
+		for (i = 0; i < NUM_FREQ_INVALID; i++) {
+			tx.modes = ADJ_FREQUENCY;
+			tx.freq = invalid_freq[i];
+			ret = adjtimex(&tx);
+			if (ret >= 0) {
+				printf("[FAIL]\n");
+				printf("Error: No failure on invalid ADJ_FREQUENCY %ld\n",
+					invalid_freq[i]);
+				pass = -1;
+				goto out;
+			}
+		}
+	}
+
+	printf("[OK]\n");
+out:
+	/* reset freq to zero */
+	tx.modes = ADJ_FREQUENCY;
+	tx.freq = 0;
+	ret = adjtimex(&tx);
+
+	return pass;
+}
+
+
+int set_offset(long long offset, int use_nano)
+{
+	struct timex tmx = {};
+	int ret;
+
+	tmx.modes = ADJ_SETOFFSET;
+	if (use_nano) {
+		tmx.modes |= ADJ_NANO;
+
+		tmx.time.tv_sec = offset / NSEC_PER_SEC;
+		tmx.time.tv_usec = offset % NSEC_PER_SEC;
+
+		if (offset < 0 && tmx.time.tv_usec) {
+			tmx.time.tv_sec -= 1;
+			tmx.time.tv_usec += NSEC_PER_SEC;
+		}
+	} else {
+		tmx.time.tv_sec = offset / USEC_PER_SEC;
+		tmx.time.tv_usec = offset % USEC_PER_SEC;
+
+		if (offset < 0 && tmx.time.tv_usec) {
+			tmx.time.tv_sec -= 1;
+			tmx.time.tv_usec += USEC_PER_SEC;
+		}
+	}
+
+	ret = clock_adjtime(CLOCK_REALTIME, &tmx);
+	if (ret < 0) {
+		printf("(sec: %ld  usec: %ld) ", tmx.time.tv_sec, tmx.time.tv_usec);
+		printf("[FAIL]\n");
+		return -1;
+	}
+	return 0;
+}
+
+int set_bad_offset(long sec, long usec, int use_nano)
+{
+	struct timex tmx = {};
+	int ret;
+
+	tmx.modes = ADJ_SETOFFSET;
+	if (use_nano)
+		tmx.modes |= ADJ_NANO;
+
+	tmx.time.tv_sec = sec;
+	tmx.time.tv_usec = usec;
+	ret = clock_adjtime(CLOCK_REALTIME, &tmx);
+	if (ret >= 0) {
+		printf("Invalid (sec: %ld  usec: %ld) did not fail! ", tmx.time.tv_sec, tmx.time.tv_usec);
+		printf("[FAIL]\n");
+		return -1;
+	}
+	return 0;
+}
+
+int validate_set_offset(void)
+{
+	printf("Testing ADJ_SETOFFSET... ");
+	fflush(stdout);
+
+	/* Test valid values */
+	if (set_offset(NSEC_PER_SEC - 1, 1))
+		return -1;
+
+	if (set_offset(-NSEC_PER_SEC + 1, 1))
+		return -1;
+
+	if (set_offset(-NSEC_PER_SEC - 1, 1))
+		return -1;
+
+	if (set_offset(5 * NSEC_PER_SEC, 1))
+		return -1;
+
+	if (set_offset(-5 * NSEC_PER_SEC, 1))
+		return -1;
+
+	if (set_offset(5 * NSEC_PER_SEC + NSEC_PER_SEC / 2, 1))
+		return -1;
+
+	if (set_offset(-5 * NSEC_PER_SEC - NSEC_PER_SEC / 2, 1))
+		return -1;
+
+	if (set_offset(USEC_PER_SEC - 1, 0))
+		return -1;
+
+	if (set_offset(-USEC_PER_SEC + 1, 0))
+		return -1;
+
+	if (set_offset(-USEC_PER_SEC - 1, 0))
+		return -1;
+
+	if (set_offset(5 * USEC_PER_SEC, 0))
+		return -1;
+
+	if (set_offset(-5 * USEC_PER_SEC, 0))
+		return -1;
+
+	if (set_offset(5 * USEC_PER_SEC + USEC_PER_SEC / 2, 0))
+		return -1;
+
+	if (set_offset(-5 * USEC_PER_SEC - USEC_PER_SEC / 2, 0))
+		return -1;
+
+	/* Test invalid values */
+	if (set_bad_offset(0, -1, 1))
+		return -1;
+	if (set_bad_offset(0, -1, 0))
+		return -1;
+	if (set_bad_offset(0, 2 * NSEC_PER_SEC, 1))
+		return -1;
+	if (set_bad_offset(0, 2 * USEC_PER_SEC, 0))
+		return -1;
+	if (set_bad_offset(0, NSEC_PER_SEC, 1))
+		return -1;
+	if (set_bad_offset(0, USEC_PER_SEC, 0))
+		return -1;
+	if (set_bad_offset(0, -NSEC_PER_SEC, 1))
+		return -1;
+	if (set_bad_offset(0, -USEC_PER_SEC, 0))
+		return -1;
+
+	printf("[OK]\n");
+	return 0;
+}
+
+int main(int argc, char **argv)
+{
+	if (validate_freq())
+		ksft_exit_fail();
+
+	if (validate_set_offset())
+		ksft_exit_fail();
+
+	ksft_exit_pass();
+}