scftorture: Count single_rpc offline failures in statistics outputgrafted

scf_torture_stats_print() aggregates each invoker thread's counters
into a local scf_statistics structure before printing, but the
n_single_rpc_ofl field is missing from the aggregation loop.  As a
result, the "single_rpc_ofl" value printed in the statistics line is
always zero, even when smp_call_function_single() invocations for the
RPC test have failed due to offline CPUs and been counted by the
invoker threads.

Add the missing accumulation so that the printed value reflects the
actual counts.

Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

1 files changed, 215 insertions, 0 deletions

diff --git a/tools/power/cpupower/README b/tools/power/cpupower/README
new file mode 100644
index 000000000..9de449469
--- /dev/null
+++ b/tools/power/cpupower/README
@@ -0,0 +1,215 @@
+The cpupower package consists of the following elements:
+
+requirements
+------------
+
+On x86 pciutils is needed at runtime (-lpci).
+For compilation pciutils-devel (pci/pci.h) and a gcc version
+providing cpuid.h is needed.
+For both it's not explicitly checked for (yet).
+
+
+libcpupower
+----------
+
+"libcpupower" is a library which offers a unified access method for userspace
+tools and programs to the cpufreq core and drivers in the Linux kernel. This
+allows for code reduction in userspace tools, a clean implementation of
+the interaction to the cpufreq core, and support for both the sysfs and proc
+interfaces [depending on configuration, see below].
+
+
+compilation and installation
+----------------------------
+
+There are 2 output directories - one for the build output and another for
+the installation of the build results, that is the utility, library,
+man pages, etc...
+
+default directory
+-----------------
+
+In the case of default directory, build and install process requires no
+additional parameters:
+
+build
+-----
+
+$ make
+
+The output directory for the 'make' command is the current directory and
+its subdirs in the kernel tree:
+tools/power/cpupower
+
+install
+-------
+
+$ sudo make install
+
+'make install' command puts targets to default system dirs:
+
+-----------------------------------------------------------------------
+| Installing file        |               System dir                   |
+-----------------------------------------------------------------------
+| libcpupower            | /usr/lib                                   |
+-----------------------------------------------------------------------
+| cpupower               | /usr/bin                                   |
+-----------------------------------------------------------------------
+| cpufreq-bench_plot.sh  | /usr/bin                                   |
+-----------------------------------------------------------------------
+| man pages              | /usr/man                                   |
+-----------------------------------------------------------------------
+| systemd service        | /usr/lib/systemd/system                    |
+-----------------------------------------------------------------------
+| systemd support script | /usr/libexec                               |
+-----------------------------------------------------------------------
+
+To put it in other words it makes build results available system-wide,
+enabling any user to simply start using it without any additional steps
+
+custom directory
+----------------
+
+There are 2 make's command-line variables 'O' and 'DESTDIR' that setup
+appropriate dirs:
+'O' - build directory
+'DESTDIR' - installation directory. This variable could also be setup in
+the 'CONFIGURATION' block of the "Makefile"
+
+build
+-----
+
+$ make O=<your_custom_build_catalog>
+
+Example:
+$ make O=/home/hedin/prj/cpupower/build
+
+install
+-------
+
+$ make O=<your_custom_build_catalog> DESTDIR=<your_custom_install_catalog>
+
+Example:
+$ make O=/home/hedin/prj/cpupower/build DESTDIR=/home/hedin/prj/cpupower \
+> install
+
+Notice that both variables 'O' and 'DESTDIR' have been provided. The reason
+is that the build results are saved in the custom output dir defined by 'O'
+variable. So, this dir is the source for the installation step. If only
+'DESTDIR' were provided then the 'install' target would assume that the
+build directory is the current one, build everything there and install
+from the current dir.
+
+The files will be installed to the following dirs:
+
+-----------------------------------------------------------------------
+| Installing file        |               System dir                   |
+-----------------------------------------------------------------------
+| libcpupower            | ${DESTDIR}/usr/lib                         |
+-----------------------------------------------------------------------
+| cpupower               | ${DESTDIR}/usr/bin                         |
+-----------------------------------------------------------------------
+| cpufreq-bench_plot.sh  | ${DESTDIR}/usr/bin                         |
+-----------------------------------------------------------------------
+| man pages              | ${DESTDIR}/usr/man                         |
+-----------------------------------------------------------------------
+| systemd service        | ${DESTDIR}/usr/lib/systemd/system          |
+-----------------------------------------------------------------------
+| systemd support script | ${DESTDIR}/usr/libexec                     |
+-----------------------------------------------------------------------
+
+If you look at the table for the default 'make' output dirs you will
+notice that the only difference with the non-default case is the
+${DESTDIR} prefix. So, the structure of the output dirs remains the same
+regardles of the root output directory.
+
+
+clean and uninstall
+-------------------
+
+'clean' target is intended for cleanup the build catalog from build results
+'uninstall' target is intended for removing installed files from the
+installation directory
+
+default directory
+-----------------
+
+This case is a straightforward one:
+$ make clean
+$ make uninstall
+
+custom directory
+----------------
+
+Use 'O' command line variable to remove previously built files from the
+build dir:
+$ make O=<your_custom_build_catalog> clean
+
+Example:
+$ make O=/home/hedin/prj/cpupower/build clean
+
+Use 'DESTDIR' command line variable to uninstall previously installed files
+from the given dir:
+$ make DESTDIR=<your_custom_install_catalog>
+
+Example:
+make DESTDIR=/home/hedin/prj/cpupower uninstall
+
+
+running the tool
+----------------
+
+default directory
+-----------------
+
+$ sudo cpupower
+
+custom directory
+----------------
+
+When it comes to run the utility from the custom build catalog things
+become a little bit complicated as 'just run' approach doesn't work.
+Assuming that the current dir is '<your_custom_install_catalog>/usr',
+issuing the following command:
+
+$ sudo ./bin/cpupower
+will produce the following error output:
+./bin/cpupower: error while loading shared libraries: libcpupower.so.1:
+cannot open shared object file: No such file or directory
+
+The issue is that binary cannot find the 'libcpupower' library. So, we
+shall point to the lib dir:
+sudo LD_LIBRARY_PATH=lib64/ ./bin/cpupower
+
+systemd service
+---------------
+
+A systemd service is also provided to run the cpupower utility at boot with
+settings read from a configuration file.
+
+If you want systemd to find the new service after the installation, the service
+unit must have been installed in one of the system unit search path directories
+(such as '/usr/lib/systemd/system/', which is the default location) and (unless
+you are willing to wait for the next reboot) you need to issue the following
+command:
+
+$ sudo systemctl daemon-reload
+
+If you want to enable this systemd service, edit '/etc/cpupower-service.conf'
+(uncommenting at least one of the options, depending on your preferences)
+and then issue the following command:
+
+$ sudo systemctl enable --now cpupower.service
+
+
+THANKS
+------
+Many thanks to Mattia Dongili who wrote the autotoolization and
+libtoolization, the manpages and the italian language file for cpupower;
+to Dave Jones for his feedback and his dump_psb tool; to Bruno Ducrot for his
+powernow-k8-decode and intel_gsic tools as well as the french language file;
+and to various others commenting on the previous (pre-)releases of 
+cpupower.
+
+
+        Dominik Brodowski