Merge tag 'io_uring-7.3-20261002' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linuxgrafted

Pull io_uring fixes from Jens Axboe:

 - Fix a task_work add use-after-free with SQPOLL.

   The sqpoll thread could pop and complete the last request while
   io_req_normal_work_add() was still looking at them after the mpscq
   push.

   Use the same approach as DEFER_TASKRUN to protect from that, holding
   an RCU read lock across the add, and have exit wait for an RCU grace
   period for SQPOLL rings as well.

 - CQE32 ring fixes: correct the free entry check for 32b CQEs, zero the
   big_cqe for aux CQEs, and only post the dummy skip CQE on CQE_MIXED
   rings

 - Mark the source filter table as COW when cloning bpf filters, so
   registering another filter on the source doesn't modify the shared
   table in place

 - Initialize the task context before running the BPF loop

 - Requeue zcrx multishot receives stopped by a local resource

 - End a TX_TIMESTAMP multishot cmd when the CQ is full (lollipopkit)

* tag 'io_uring-7.3-20261002' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
  io_uring: fix task_work add use-after-free with SQPOLL
  io_uring/cmd_net: end TX_TIMESTAMP multishot when the CQ is full
  io_uring/zcrx: requeue multishot receives stopped by a local resource
  io_uring: initialize task context before running the BPF loop
  io_uring: zero big_cqe for aux CQEs on CQE32 rings
  io_uring: fix free entry check for 32b CQEs on CQE32 rings
  io_uring: only post the dummy skip CQE on CQE_MIXED rings
  io_uring/bpf_filter: mark source as COW when cloning filters

92 files changed, 13699 insertions, 0 deletions

diff --git a/tools/perf/trace/beauty/Build b/tools/perf/trace/beauty/Build
new file mode 100644
index 000000000..bf9553f68
--- /dev/null
+++ b/tools/perf/trace/beauty/Build
@@ -0,0 +1,320 @@
+perf-y += clone.o
+perf-y += fcntl.o
+perf-y += flock.o
+perf-y += fs_at_flags.o
+perf-y += fsmount.o
+perf-y += fspick.o
+ifeq ($(SRCARCH),$(filter $(SRCARCH),x86))
+perf-y += ioctl.o
+endif
+perf-y += kcmp.o
+perf-y += mount_flags.o
+perf-y += move_mount.o
+perf-y += pkey_alloc.o
+perf-y += arch_prctl.o
+perf-y += prctl.o
+perf-y += renameat.o
+perf-y += sockaddr.o
+perf-y += socket.o
+perf-y += statx.o
+perf-y += sync_file_range.o
+perf-y += timespec.o
+perf-util-y += syscalltbl.o
+perf-y += fsconfig.o
+perf-y += eventfd.o
+perf-y += futex_op.o
+perf-y += futex_val3.o
+perf-y += mmap.o
+perf-y += mode_t.o
+perf-y += msg_flags.o
+perf-y += open_flags.o
+perf-y += perf_event_open.o
+perf-y += pid.o
+perf-y += sched_policy.o
+perf-y += seccomp.o
+perf-y += signum.o
+perf-y += socket_type.o
+perf-y += waitid_options.o
+perf-util-y += arch_errno_names.o
+
+perf-y += tracepoints/
+
+ifdef SHELLCHECK
+  SHELL_TESTS := $(wildcard trace/beauty/*.sh)
+  SHELL_TEST_LOGS := $(SHELL_TESTS:trace/beauty/%=%.shellcheck_log)
+else
+  SHELL_TESTS :=
+  SHELL_TEST_LOGS :=
+endif
+
+$(OUTPUT)%.shellcheck_log: %
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,test)$(SHELLCHECK) "$<" > $@ || (cat $@ && rm $@ && false)
+
+perf-y += $(SHELL_TEST_LOGS)
+
+beauty_linux_dir := $(srctree)/tools/perf/trace/beauty/include/linux/
+beauty_uapi_linux_dir := $(srctree)/tools/perf/trace/beauty/include/uapi/linux/
+beauty_uapi_sound_dir := $(srctree)/tools/perf/trace/beauty/include/uapi/sound/
+beauty_arch_asm_dir := $(srctree)/tools/perf/trace/beauty/arch/x86/include/asm/
+beauty_x86_arch_asm_uapi_dir := $(srctree)/tools/perf/trace/beauty/arch/x86/include/uapi/asm/
+
+linux_uapi_dir := $(srctree)/tools/include/uapi/linux
+asm_generic_uapi_dir := $(srctree)/tools/include/uapi/asm-generic
+arch_asm_uapi_dir := $(srctree)/tools/arch/$(SRCARCH)/include/uapi/asm/
+x86_arch_asm_dir := $(srctree)/tools/arch/x86/include/asm/
+
+beauty_outdir := $(OUTPUT)trace/beauty/generated
+beauty_ioctl_outdir := $(beauty_outdir)/ioctl
+
+syscall_array := $(beauty_outdir)/syscalltbl.c
+syscall_tbl := $(srctree)/tools/perf/trace/beauty/syscalltbl.sh
+syscall_tbl_data := $(srctree)/tools/scripts/syscall.tbl \
+	$(wildcard $(srctree)/tools/perf/arch/*/entry/syscalls/syscall*.tbl)
+
+$(syscall_array): $(syscall_tbl) $(syscall_tbl_data)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(syscall_tbl)' $(srctree)/tools $@
+
+fs_at_flags_array := $(beauty_outdir)/fs_at_flags_array.c
+fs_at_flags_tbl := $(srctree)/tools/perf/trace/beauty/fs_at_flags.sh
+
+$(fs_at_flags_array): $(beauty_uapi_linux_dir)/fcntl.h $(fs_at_flags_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(fs_at_flags_tbl)' $(beauty_uapi_linux_dir) > $@
+
+clone_flags_array := $(beauty_outdir)/clone_flags_array.c
+clone_flags_tbl := $(srctree)/tools/perf/trace/beauty/clone.sh
+
+$(clone_flags_array): $(beauty_uapi_linux_dir)/sched.h $(clone_flags_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(clone_flags_tbl)' $(beauty_uapi_linux_dir) > $@
+
+drm_ioctl_array := $(beauty_ioctl_outdir)/drm_ioctl_array.c
+drm_hdr_dir := $(srctree)/tools/perf/trace/beauty/include/uapi/drm
+drm_ioctl_tbl := $(srctree)/tools/perf/trace/beauty/drm_ioctl.sh
+
+$(drm_ioctl_array): $(drm_hdr_dir)/drm.h $(drm_hdr_dir)/i915_drm.h $(drm_ioctl_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(drm_ioctl_tbl)' $(drm_hdr_dir) > $@
+
+fadvise_advice_array := $(beauty_outdir)/fadvise_advice_array.c
+fadvise_advice_tbl := $(srctree)/tools/perf/trace/beauty/fadvise.sh
+
+$(fadvise_advice_array): $(beauty_uapi_linux_dir)/fadvise.h $(fadvise_advice_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(fadvise_advice_tbl)' $(beauty_uapi_linux_dir) > $@
+
+fsmount_arrays := $(beauty_outdir)/fsmount_arrays.c
+fsmount_tbls := $(srctree)/tools/perf/trace/beauty/fsmount.sh
+
+$(fsmount_arrays): $(beauty_uapi_linux_dir)/mount.h $(fsmount_tbls)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(fsmount_tbls)' $(beauty_uapi_linux_dir) > $@
+
+fsmount_attr_arrays := $(beauty_outdir)/fsmount_attr_arrays.c
+fsmount_attr_tbls := $(srctree)/tools/perf/trace/beauty/fsmount_attr.sh
+
+$(fsmount_attr_arrays): $(beauty_uapi_linux_dir)/mount.h $(fsmount_attr_tbls)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(fsmount_attr_tbls)' $(beauty_uapi_linux_dir) > $@
+
+fspick_arrays := $(beauty_outdir)/fspick_arrays.c
+fspick_tbls := $(srctree)/tools/perf/trace/beauty/fspick.sh
+
+$(fspick_arrays): $(beauty_uapi_linux_dir)/mount.h $(fspick_tbls)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(fspick_tbls)' $(beauty_uapi_linux_dir) > $@
+
+fsconfig_arrays := $(beauty_outdir)/fsconfig_arrays.c
+fsconfig_tbls := $(srctree)/tools/perf/trace/beauty/fsconfig.sh
+
+$(fsconfig_arrays): $(beauty_uapi_linux_dir)/mount.h $(fsconfig_tbls)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(fsconfig_tbls)' $(beauty_uapi_linux_dir) > $@
+
+pkey_alloc_access_rights_array := $(beauty_outdir)/pkey_alloc_access_rights_array.c
+asm_generic_hdr_dir := $(srctree)/tools/include/uapi/asm-generic/
+pkey_alloc_access_rights_tbl := $(srctree)/tools/perf/trace/beauty/pkey_alloc_access_rights.sh
+
+$(pkey_alloc_access_rights_array): $(asm_generic_hdr_dir)/mman-common.h $(pkey_alloc_access_rights_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(pkey_alloc_access_rights_tbl)' $(asm_generic_hdr_dir) > $@
+
+sndrv_ctl_ioctl_array := $(beauty_ioctl_outdir)/sndrv_ctl_ioctl_array.c
+sndrv_ctl_hdr_dir := $(srctree)/tools/include/uapi/sound
+sndrv_ctl_ioctl_tbl := $(srctree)/tools/perf/trace/beauty/sndrv_ctl_ioctl.sh
+
+$(sndrv_ctl_ioctl_array): $(beauty_uapi_sound_dir)/asound.h $(sndrv_ctl_ioctl_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(sndrv_ctl_ioctl_tbl)' $(beauty_uapi_sound_dir) > $@
+
+sndrv_pcm_ioctl_array := $(beauty_ioctl_outdir)/sndrv_pcm_ioctl_array.c
+sndrv_pcm_hdr_dir := $(srctree)/tools/include/uapi/sound
+sndrv_pcm_ioctl_tbl := $(srctree)/tools/perf/trace/beauty/sndrv_pcm_ioctl.sh
+
+$(sndrv_pcm_ioctl_array): $(beauty_uapi_sound_dir)/asound.h $(sndrv_pcm_ioctl_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(sndrv_pcm_ioctl_tbl)' $(beauty_uapi_sound_dir) > $@
+
+kcmp_type_array := $(beauty_outdir)/kcmp_type_array.c
+kcmp_hdr_dir := $(srctree)/tools/include/uapi/linux/
+kcmp_type_tbl := $(srctree)/tools/perf/trace/beauty/kcmp_type.sh
+
+$(kcmp_type_array): $(kcmp_hdr_dir)/kcmp.h $(kcmp_type_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(kcmp_type_tbl)' $(kcmp_hdr_dir) > $@
+
+kvm_ioctl_array := $(beauty_ioctl_outdir)/kvm_ioctl_array.c
+kvm_hdr_dir := $(srctree)/tools/include/uapi/linux
+kvm_ioctl_tbl := $(srctree)/tools/perf/trace/beauty/kvm_ioctl.sh
+
+$(kvm_ioctl_array): $(kvm_hdr_dir)/kvm.h $(kvm_ioctl_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(kvm_ioctl_tbl)' $(kvm_hdr_dir) > $@
+
+socket_arrays := $(beauty_outdir)/socket.c
+socket_tbl := $(srctree)/tools/perf/trace/beauty/socket.sh
+
+$(socket_arrays): $(linux_uapi_dir)/in.h $(beauty_linux_dir)/socket.h $(socket_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(socket_tbl)' $(linux_uapi_dir) $(beauty_linux_dir) > $@
+
+sockaddr_arrays := $(beauty_outdir)/sockaddr.c
+sockaddr_tbl := $(srctree)/tools/perf/trace/beauty/sockaddr.sh
+
+$(sockaddr_arrays): $(beauty_linux_dir)/socket.h $(sockaddr_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(sockaddr_tbl)' $(beauty_linux_dir) > $@
+
+vhost_virtio_ioctl_array := $(beauty_ioctl_outdir)/vhost_virtio_ioctl_array.c
+vhost_virtio_ioctl_tbl := $(srctree)/tools/perf/trace/beauty/vhost_virtio_ioctl.sh
+
+$(vhost_virtio_ioctl_array): $(beauty_uapi_linux_dir)/vhost.h $(vhost_virtio_ioctl_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(vhost_virtio_ioctl_tbl)' $(beauty_uapi_linux_dir) > $@
+
+perf_ioctl_array := $(beauty_ioctl_outdir)/perf_ioctl_array.c
+perf_hdr_dir := $(srctree)/tools/include/uapi/linux
+perf_ioctl_tbl := $(srctree)/tools/perf/trace/beauty/perf_ioctl.sh
+
+$(perf_ioctl_array): $(perf_hdr_dir)/perf_event.h $(perf_ioctl_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(perf_ioctl_tbl)' $(perf_hdr_dir) > $@
+
+madvise_behavior_array := $(beauty_outdir)/madvise_behavior_array.c
+madvise_hdr_dir := $(srctree)/tools/include/uapi/asm-generic/
+madvise_behavior_tbl := $(srctree)/tools/perf/trace/beauty/madvise_behavior.sh
+
+$(madvise_behavior_array): $(madvise_hdr_dir)/mman-common.h $(madvise_behavior_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(madvise_behavior_tbl)' $(madvise_hdr_dir) > $@
+
+mmap_flags_array := $(beauty_outdir)/mmap_flags_array.c
+mmap_flags_tbl := $(srctree)/tools/perf/trace/beauty/mmap_flags.sh
+
+$(mmap_flags_array): $(linux_uapi_dir)/mman.h $(asm_generic_uapi_dir)/mman.h $(asm_generic_uapi_dir)/mman-common.h $(mmap_flags_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(mmap_flags_tbl)' $(linux_uapi_dir) $(asm_generic_uapi_dir) $(arch_asm_uapi_dir) > $@
+
+mremap_flags_array := $(beauty_outdir)/mremap_flags_array.c
+mremap_flags_tbl := $(srctree)/tools/perf/trace/beauty/mremap_flags.sh
+
+$(mremap_flags_array): $(linux_uapi_dir)/mman.h $(mremap_flags_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(mremap_flags_tbl)' $(linux_uapi_dir) > $@
+
+mount_flags_array := $(beauty_outdir)/mount_flags_array.c
+mount_flags_tbl := $(srctree)/tools/perf/trace/beauty/mount_flags.sh
+
+$(mount_flags_array): $(beauty_uapi_linux_dir)/mount.h $(mount_flags_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(mount_flags_tbl)' $(beauty_uapi_linux_dir) > $@
+
+move_mount_flags_array := $(beauty_outdir)/move_mount_flags_array.c
+move_mount_flags_tbl := $(srctree)/tools/perf/trace/beauty/move_mount_flags.sh
+
+$(move_mount_flags_array): $(beauty_uapi_linux_dir)/mount.h $(move_mount_flags_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(move_mount_flags_tbl)' $(beauty_uapi_linux_dir) > $@
+
+mmap_prot_array := $(beauty_outdir)/mmap_prot_array.c
+mmap_prot_tbl := $(srctree)/tools/perf/trace/beauty/mmap_prot.sh
+
+$(mmap_prot_array): $(asm_generic_uapi_dir)/mman.h $(asm_generic_uapi_dir)/mman-common.h $(mmap_prot_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(mmap_prot_tbl)' $(asm_generic_uapi_dir) $(arch_asm_uapi_dir) > $@
+
+prctl_option_array := $(beauty_outdir)/prctl_option_array.c
+prctl_option_tbl := $(srctree)/tools/perf/trace/beauty/prctl_option.sh
+
+$(prctl_option_array): $(beauty_uapi_linux_dir)/prctl.h $(prctl_option_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(prctl_option_tbl)' $(beauty_uapi_linux_dir) > $@
+
+usbdevfs_ioctl_array := $(beauty_ioctl_outdir)/usbdevfs_ioctl_array.c
+usbdevfs_ioctl_tbl := $(srctree)/tools/perf/trace/beauty/usbdevfs_ioctl.sh
+
+$(usbdevfs_ioctl_array): $(beauty_uapi_linux_dir)/usbdevice_fs.h $(usbdevfs_ioctl_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(usbdevfs_ioctl_tbl)' $(beauty_uapi_linux_dir) > $@
+
+x86_arch_prctl_code_array := $(beauty_outdir)/x86_arch_prctl_code_array.c
+x86_arch_prctl_code_tbl := $(srctree)/tools/perf/trace/beauty/x86_arch_prctl.sh
+
+$(x86_arch_prctl_code_array): $(beauty_x86_arch_asm_uapi_dir)/prctl.h $(x86_arch_prctl_code_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(x86_arch_prctl_code_tbl)' $(beauty_x86_arch_asm_uapi_dir) > $@
+
+
+rename_flags_array := $(beauty_outdir)/rename_flags_array.c
+rename_flags_tbl := $(srctree)/tools/perf/trace/beauty/rename_flags.sh
+
+$(rename_flags_array): $(beauty_uapi_linux_dir)/fs.h $(rename_flags_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(rename_flags_tbl)' $(beauty_uapi_linux_dir) > $@
+
+
+statx_mask_array := $(beauty_outdir)/statx_mask_array.c
+statx_mask_tbl := $(srctree)/tools/perf/trace/beauty/statx_mask.sh
+
+$(statx_mask_array): $(beauty_uapi_linux_dir)/stat.h $(statx_mask_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(statx_mask_tbl)' $(beauty_uapi_linux_dir) > $@
+
+sync_file_range_arrays := $(beauty_outdir)/sync_file_range_arrays.c
+sync_file_range_tbls := $(srctree)/tools/perf/trace/beauty/sync_file_range.sh
+
+$(sync_file_range_arrays): $(beauty_uapi_linux_dir)/fs.h $(sync_file_range_tbls)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(sync_file_range_tbls)' $(beauty_uapi_linux_dir) > $@
+
+$(OUTPUT)trace/beauty/syscalltbl.o: $(syscall_array)
+$(OUTPUT)trace/beauty/fsconfig.o: $(fsconfig_arrays)
+$(OUTPUT)trace/beauty/clone.o: $(clone_flags_array)
+$(OUTPUT)trace/beauty/fs_at_flags.o: $(fs_at_flags_array)
+$(OUTPUT)trace/beauty/fsmount.o: $(fsmount_arrays) $(fsmount_attr_arrays)
+$(OUTPUT)trace/beauty/fspick.o: $(fspick_arrays)
+$(OUTPUT)trace/beauty/ioctl.o: $(drm_ioctl_array) $(sndrv_pcm_ioctl_array) $(sndrv_ctl_ioctl_array) $(kvm_ioctl_array) $(vhost_virtio_ioctl_array) $(perf_ioctl_array) $(usbdevfs_ioctl_array)
+$(OUTPUT)trace/beauty/kcmp.o: $(kcmp_type_array)
+$(OUTPUT)trace/beauty/mmap.o: $(mmap_prot_array) $(mmap_flags_array) $(mremap_flags_array) $(madvise_behavior_array)
+$(OUTPUT)trace/beauty/mount_flags.o: $(mount_flags_array)
+$(OUTPUT)trace/beauty/move_mount.o: $(move_mount_flags_array)
+$(OUTPUT)trace/beauty/pkey_alloc.o: $(pkey_alloc_access_rights_array)
+$(OUTPUT)trace/beauty/prctl.o: $(prctl_option_array)
+$(OUTPUT)trace/beauty/renameat.o: $(rename_flags_array)
+$(OUTPUT)trace/beauty/sockaddr.o: $(sockaddr_arrays)
+$(OUTPUT)trace/beauty/socket.o: $(socket_arrays)
+$(OUTPUT)trace/beauty/statx.o: $(statx_mask_array)
+$(OUTPUT)trace/beauty/sync_file_range.o: $(sync_file_range_arrays)
+$(OUTPUT)trace/beauty/arch_prctl.o: $(x86_arch_prctl_code_array)
+
+arch_errno_name_array := $(beauty_outdir)/arch_errno_name_array.c
+arch_errno_hdr_dir := $(srctree)/tools
+arch_errno_tbl := $(srctree)/tools/perf/trace/beauty/arch_errno_names.sh
+
+$(arch_errno_name_array): $(arch_errno_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(arch_errno_tbl)' '$(patsubst -%,,$(CC))' $(arch_errno_hdr_dir) > $@
+
+$(OUTPUT)trace/beauty/arch_errno_names.o: $(arch_errno_name_array)
diff --git a/tools/perf/trace/beauty/arch/x86/include/asm/irq_vectors.h b/tools/perf/trace/beauty/arch/x86/include/asm/irq_vectors.h
new file mode 100644
index 000000000..85253fc8e
--- /dev/null
+++ b/tools/perf/trace/beauty/arch/x86/include/asm/irq_vectors.h
@@ -0,0 +1,148 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_X86_IRQ_VECTORS_H
+#define _ASM_X86_IRQ_VECTORS_H
+
+#include <linux/threads.h>
+/*
+ * Linux IRQ vector layout.
+ *
+ * There are 256 IDT entries (per CPU - each entry is 8 bytes) which can
+ * be defined by Linux. They are used as a jump table by the CPU when a
+ * given vector is triggered - by a CPU-external, CPU-internal or
+ * software-triggered event.
+ *
+ * Linux sets the kernel code address each entry jumps to early during
+ * bootup, and never changes them. This is the general layout of the
+ * IDT entries:
+ *
+ *  Vectors   0 ...  31 : system traps and exceptions - hardcoded events
+ *  Vectors  32 ... 127 : device interrupts
+ *  Vector  128         : legacy int80 syscall interface
+ *  Vectors 129 ... FIRST_SYSTEM_VECTOR-1 : device interrupts
+ *  Vectors FIRST_SYSTEM_VECTOR ... 255   : special interrupts
+ *
+ * 64-bit x86 has per CPU IDT tables, 32-bit has one shared IDT table.
+ *
+ * This file enumerates the exact layout of them:
+ */
+
+/* This is used as an interrupt vector when programming the APIC. */
+#define NMI_VECTOR			0x02
+
+/*
+ * IDT vectors usable for external interrupt sources start at 0x20.
+ * (0x80 is the syscall vector, 0x30-0x3f are for ISA)
+ */
+#define FIRST_EXTERNAL_VECTOR		0x20
+
+#define IA32_SYSCALL_VECTOR		0x80
+
+/*
+ * Vectors 0x30-0x3f are used for ISA interrupts.
+ *   round up to the next 16-vector boundary
+ */
+#define ISA_IRQ_VECTOR(irq)		(((FIRST_EXTERNAL_VECTOR + 16) & ~15) + irq)
+
+/*
+ * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
+ *
+ *  some of the following vectors are 'rare', they are merged
+ *  into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
+ *  TLB, reschedule and local APIC vectors are performance-critical.
+ */
+
+#define SPURIOUS_APIC_VECTOR		0xff
+/*
+ * Sanity check
+ */
+#if ((SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F)
+# error SPURIOUS_APIC_VECTOR definition error
+#endif
+
+#define ERROR_APIC_VECTOR		0xfe
+#define RESCHEDULE_VECTOR		0xfd
+#define CALL_FUNCTION_VECTOR		0xfc
+#define CALL_FUNCTION_SINGLE_VECTOR	0xfb
+#define THERMAL_APIC_VECTOR		0xfa
+#define THRESHOLD_APIC_VECTOR		0xf9
+#define REBOOT_VECTOR			0xf8
+
+/*
+ * Generic system vector for platform specific use
+ */
+#define X86_PLATFORM_IPI_VECTOR		0xf7
+
+/*
+ * IRQ work vector:
+ */
+#define IRQ_WORK_VECTOR			0xf6
+
+/* IRQ vector for PMIs when running a guest with a mediated PMU. */
+#define PERF_GUEST_MEDIATED_PMI_VECTOR	0xf5
+
+#define DEFERRED_ERROR_VECTOR		0xf4
+
+/* Vector on which hypervisor callbacks will be delivered */
+#define HYPERVISOR_CALLBACK_VECTOR	0xf3
+
+/* Vector for KVM to deliver posted interrupt IPI */
+#define POSTED_INTR_VECTOR		0xf2
+#define POSTED_INTR_WAKEUP_VECTOR	0xf1
+#define POSTED_INTR_NESTED_VECTOR	0xf0
+
+#define MANAGED_IRQ_SHUTDOWN_VECTOR	0xef
+
+#if IS_ENABLED(CONFIG_HYPERV)
+#define HYPERV_REENLIGHTENMENT_VECTOR	0xee
+#define HYPERV_STIMER0_VECTOR		0xed
+#endif
+
+#define LOCAL_TIMER_VECTOR		0xec
+
+/*
+ * Posted interrupt notification vector for all device MSIs delivered to
+ * the host kernel.
+ */
+#define POSTED_MSI_NOTIFICATION_VECTOR	0xeb
+
+#define NR_VECTORS			 256
+
+#ifdef CONFIG_X86_LOCAL_APIC
+#define FIRST_SYSTEM_VECTOR		POSTED_MSI_NOTIFICATION_VECTOR
+#else
+#define FIRST_SYSTEM_VECTOR		NR_VECTORS
+#endif
+
+#define NR_EXTERNAL_VECTORS		(FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
+#define NR_SYSTEM_VECTORS		(NR_VECTORS - FIRST_SYSTEM_VECTOR)
+
+/*
+ * Size the maximum number of interrupts.
+ *
+ * If the irq_desc[] array has a sparse layout, we can size things
+ * generously - it scales up linearly with the maximum number of CPUs,
+ * and the maximum number of IO-APICs, whichever is higher.
+ *
+ * In other cases we size more conservatively, to not create too large
+ * static arrays.
+ */
+
+#define NR_IRQS_LEGACY			16
+
+#define CPU_VECTOR_LIMIT		(64 * NR_CPUS)
+#define IO_APIC_VECTOR_LIMIT		(32 * MAX_IO_APICS)
+
+#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_PCI_MSI)
+#define NR_IRQS						\
+	(CPU_VECTOR_LIMIT > IO_APIC_VECTOR_LIMIT ?	\
+		(NR_VECTORS + CPU_VECTOR_LIMIT)  :	\
+		(NR_VECTORS + IO_APIC_VECTOR_LIMIT))
+#elif defined(CONFIG_X86_IO_APIC)
+#define	NR_IRQS				(NR_VECTORS + IO_APIC_VECTOR_LIMIT)
+#elif defined(CONFIG_PCI_MSI)
+#define NR_IRQS				(NR_VECTORS + CPU_VECTOR_LIMIT)
+#else
+#define NR_IRQS				NR_IRQS_LEGACY
+#endif
+
+#endif /* _ASM_X86_IRQ_VECTORS_H */
diff --git a/tools/perf/trace/beauty/arch/x86/include/uapi/asm/prctl.h b/tools/perf/trace/beauty/arch/x86/include/uapi/asm/prctl.h
new file mode 100644
index 000000000..384e2cc6a
--- /dev/null
+++ b/tools/perf/trace/beauty/arch/x86/include/uapi/asm/prctl.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_X86_PRCTL_H
+#define _ASM_X86_PRCTL_H
+
+#define ARCH_SET_GS			0x1001
+#define ARCH_SET_FS			0x1002
+#define ARCH_GET_FS			0x1003
+#define ARCH_GET_GS			0x1004
+
+#define ARCH_GET_CPUID			0x1011
+#define ARCH_SET_CPUID			0x1012
+
+#define ARCH_GET_XCOMP_SUPP		0x1021
+#define ARCH_GET_XCOMP_PERM		0x1022
+#define ARCH_REQ_XCOMP_PERM		0x1023
+#define ARCH_GET_XCOMP_GUEST_PERM	0x1024
+#define ARCH_REQ_XCOMP_GUEST_PERM	0x1025
+
+#define ARCH_XCOMP_TILECFG		17
+#define ARCH_XCOMP_TILEDATA		18
+
+#define ARCH_MAP_VDSO_X32		0x2001
+#define ARCH_MAP_VDSO_32		0x2002
+#define ARCH_MAP_VDSO_64		0x2003
+
+/* Don't use 0x3001-0x3004 because of old glibcs */
+
+#define ARCH_GET_UNTAG_MASK		0x4001
+#define ARCH_ENABLE_TAGGED_ADDR		0x4002
+#define ARCH_GET_MAX_TAG_BITS		0x4003
+#define ARCH_FORCE_TAGGED_SVA		0x4004
+
+#define ARCH_SHSTK_ENABLE		0x5001
+#define ARCH_SHSTK_DISABLE		0x5002
+#define ARCH_SHSTK_LOCK			0x5003
+#define ARCH_SHSTK_UNLOCK		0x5004
+#define ARCH_SHSTK_STATUS		0x5005
+
+/* ARCH_SHSTK_ features bits */
+#define ARCH_SHSTK_SHSTK		(1ULL <<  0)
+#define ARCH_SHSTK_WRSS			(1ULL <<  1)
+
+#endif /* _ASM_X86_PRCTL_H */
diff --git a/tools/perf/trace/beauty/arch_errno_names.c b/tools/perf/trace/beauty/arch_errno_names.c
new file mode 100644
index 000000000..156c6537e
--- /dev/null
+++ b/tools/perf/trace/beauty/arch_errno_names.c
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "util/env.h"
+#include "trace/beauty/generated/arch_errno_name_array.c"
diff --git a/tools/perf/trace/beauty/arch_errno_names.sh b/tools/perf/trace/beauty/arch_errno_names.sh
new file mode 100755
index 000000000..8751bfa4a
--- /dev/null
+++ b/tools/perf/trace/beauty/arch_errno_names.sh
@@ -0,0 +1,134 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+#
+# Generate C file mapping errno codes to errno names.
+#
+# Copyright IBM Corp. 2018
+# Author(s):  Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
+
+gcc="$1"
+toolsdir="$2"
+include_path="-I$toolsdir/include/uapi"
+
+arch_string()
+{
+	echo "$1" |sed -e 'y/- /__/' |tr '[[:upper:]]' '[[:lower:]]'
+}
+
+asm_errno_file()
+{
+	arch="$1"
+
+	header="$toolsdir/arch/$arch/include/uapi/asm/errno.h"
+	if test -r "$header"; then
+		echo "$header"
+	else
+		echo "$toolsdir/include/uapi/asm-generic/errno.h"
+	fi
+}
+
+create_errno_lookup_func()
+{
+	arch=$(arch_string "$1")
+
+	printf "static const char *errno_to_name__%s(int err)\n{\n\tswitch (err) {\n" $arch
+
+	while read name nr; do
+		printf '\tcase %d: return "%s";\n' $nr $name
+	done
+
+	printf '\tdefault: return "(unknown)";\n\t}\n}\n'
+}
+
+process_arch()
+{
+	arch="$1"
+	asm_errno=$(asm_errno_file "$arch")
+
+	$gcc $CFLAGS $include_path -E -dM -x c $asm_errno \
+		|grep -hE '^#define[[:blank:]]+(E[^[:blank:]]+)[[:blank:]]+([[:digit:]]+).*' \
+		|awk '{ print $2","$3; }' \
+		|sort -t, -k2 -nu \
+		|IFS=, create_errno_lookup_func "$arch"
+}
+
+arch_to_e_machine()
+{
+	case "$1" in
+	alpha)      printf '\tcase EM_ALPHA:\n' ;;
+	arc)        printf '\tcase EM_ARC:\n' ;;
+	arm)        printf '\tcase EM_ARM:\n' ;;
+	arm64)      printf '\tcase EM_AARCH64:\n' ;;
+	csky)       printf '\tcase EM_CSKY:\n' ;;
+	hexagon)    printf '\tcase EM_HEXAGON:\n' ;;
+	loongarch)  printf '\tcase EM_LOONGARCH:\n' ;;
+	microblaze) printf '\tcase EM_MICROBLAZE:\n' ;;
+	mips)       printf '\tcase EM_MIPS:\n' ;;
+	parisc)     printf '\tcase EM_PARISC:\n' ;;
+	powerpc)    printf '\tcase EM_PPC:\n\tcase EM_PPC64:\n' ;;
+	riscv)      printf '\tcase EM_RISCV:\n' ;;
+	s390)       printf '\tcase EM_S390:\n' ;;
+	sh)         printf '\tcase EM_SH:\n' ;;
+	sparc)      printf '\tcase EM_SPARC:\n\tcase EM_SPARCV9:\n' ;;
+	x86)        printf '\tcase EM_386:\n\tcase EM_X86_64:\n' ;;
+	xtensa)     printf '\tcase EM_XTENSA:\n' ;;
+	esac
+}
+
+create_arch_errno_table_func()
+{
+	archlist="$1"
+	default="$2"
+
+	printf 'const char *arch_syscalls__strerrno(uint16_t e_machine, int err);\n\n'
+	printf '__attribute__((unused)) const char *\n'
+	printf 'arch_syscalls__strerrno(uint16_t e_machine, int err)\n'
+	printf '{\n'
+	printf '\tswitch (e_machine) {\n'
+	for arch in $archlist; do
+		arch_str=$(arch_string "$arch")
+		ems=$(arch_to_e_machine "$arch_str")
+		if [ -n "$ems" ]; then
+			printf '%s\n' "$ems"
+			printf '\t\treturn errno_to_name__%s(err);\n' "$arch_str"
+		fi
+	done
+	arch_str=$(arch_string "$default")
+	printf '\tdefault:\n\t\treturn errno_to_name__%s(err);\n' "$arch_str"
+	printf '\t}\n'
+	printf '}\n'
+}
+
+cat <<EoHEADER
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#include <string.h>
+#include <stdint.h>
+#include <elf.h>
+
+#ifndef EM_AARCH64
+#define EM_AARCH64	183
+#endif
+
+#ifndef EM_CSKY
+#define EM_CSKY		252
+#endif
+
+#ifndef EM_LOONGARCH
+#define EM_LOONGARCH	258
+#endif
+
+EoHEADER
+
+# Create list of architectures that have a specific errno.h.
+archlist=""
+for f in $toolsdir/arch/*/include/uapi/asm/errno.h; do
+	d=${f%/include/uapi/asm/errno.h}
+	arch="${d##*/}"
+	test -f $toolsdir/arch/$arch/include/uapi/asm/errno.h && archlist="$archlist $arch"
+done
+
+for arch in generic $archlist; do
+	process_arch "$arch"
+done
+create_arch_errno_table_func "$archlist" "generic"
diff --git a/tools/perf/trace/beauty/arch_prctl.c b/tools/perf/trace/beauty/arch_prctl.c
new file mode 100644
index 000000000..a211348d3
--- /dev/null
+++ b/tools/perf/trace/beauty/arch_prctl.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: LGPL-2.1
+/*
+ * trace/beauty/arch_prctl.c
+ *
+ *  Copyright (C) 2018, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+ */
+
+#include "trace/beauty/beauty.h"
+#include <linux/kernel.h>
+
+#include "trace/beauty/generated/x86_arch_prctl_code_array.c"
+
+static DEFINE_STRARRAY_OFFSET(x86_arch_prctl_codes_1, "ARCH_", x86_arch_prctl_codes_1_offset);
+static DEFINE_STRARRAY_OFFSET(x86_arch_prctl_codes_2, "ARCH_", x86_arch_prctl_codes_2_offset);
+static DEFINE_STRARRAY_OFFSET(x86_arch_prctl_codes_3, "ARCH_", x86_arch_prctl_codes_3_offset);
+
+static struct strarray *x86_arch_prctl_codes[] = {
+	&strarray__x86_arch_prctl_codes_1,
+	&strarray__x86_arch_prctl_codes_2,
+	&strarray__x86_arch_prctl_codes_3,
+};
+
+static DEFINE_STRARRAYS(x86_arch_prctl_codes);
+
+static size_t x86_arch_prctl__scnprintf_code(int option, char *bf, size_t size, bool show_prefix)
+{
+	return strarrays__scnprintf(&strarrays__x86_arch_prctl_codes, bf, size, "%#x", show_prefix, option);
+}
+
+size_t syscall_arg__scnprintf_x86_arch_prctl_code(char *bf, size_t size, struct syscall_arg *arg)
+{
+	unsigned long code = arg->val;
+
+	return x86_arch_prctl__scnprintf_code(code, bf, size, arg->show_string_prefix);
+}
diff --git a/tools/perf/trace/beauty/beauty.h b/tools/perf/trace/beauty/beauty.h
new file mode 100644
index 000000000..58a320648
--- /dev/null
+++ b/tools/perf/trace/beauty/beauty.h
@@ -0,0 +1,331 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _PERF_TRACE_BEAUTY_H
+#define _PERF_TRACE_BEAUTY_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <sys/types.h>
+#include <stdbool.h>
+
+struct strarray {
+	u64	    offset;
+	int	    nr_entries;
+	const char *prefix;
+	const char * const *entries;
+};
+
+#define DEFINE_STRARRAY(array, _prefix) struct strarray strarray__##array = { \
+	.nr_entries = ARRAY_SIZE(array), \
+	.entries = array, \
+	.prefix = _prefix, \
+}
+
+#define DEFINE_STRARRAY_OFFSET(array, _prefix, off) struct strarray strarray__##array = { \
+	.offset	    = off, \
+	.nr_entries = ARRAY_SIZE(array), \
+	.entries = array, \
+	.prefix = _prefix, \
+}
+
+size_t strarray__scnprintf(struct strarray *sa, char *bf, size_t size, const char *intfmt, bool show_prefix, int val);
+size_t strarray__scnprintf_suffix(struct strarray *sa, char *bf, size_t size, const char *intfmt, bool show_suffix, int val);
+size_t strarray__scnprintf_flags(struct strarray *sa, char *bf, size_t size, bool show_prefix, unsigned long flags);
+
+bool strarray__strtoul(struct strarray *sa, char *bf, size_t size, u64 *ret);
+bool strarray__strtoul_flags(struct strarray *sa, char *bf, size_t size, u64 *ret);
+
+struct trace;
+bool trace__show_zeros(const struct trace *trace);
+struct machine *trace__host(const struct trace *trace);
+struct thread;
+
+struct file {
+	char *pathname;
+	int  dev_maj;
+};
+
+struct file *thread__files_entry(struct thread *thread, int fd);
+
+struct strarrays {
+	int		nr_entries;
+	struct strarray **entries;
+};
+
+#define DEFINE_STRARRAYS(array) struct strarrays strarrays__##array = { \
+	.nr_entries = ARRAY_SIZE(array), \
+	.entries = array, \
+}
+
+size_t strarrays__scnprintf(struct strarrays *sas, char *bf, size_t size, const char *intfmt, bool show_prefix, int val);
+
+bool strarrays__strtoul(struct strarrays *sas, char *bf, size_t size, u64 *ret);
+
+size_t pid__scnprintf_fd(struct trace *trace, pid_t pid, int fd, char *bf, size_t size);
+
+extern struct strarray strarray__socket_families;
+
+extern struct strarray strarray__socket_level;
+
+/**
+ * augmented_arg: extra payload for syscall pointer arguments
+ 
+ * If perf_sample->raw_size is more than what a syscall sys_enter_FOO puts, then
+ * its the arguments contents, so that we can show more than just a
+ * pointer. This will be done initially with eBPF, the start of that is at the
+ * tools/perf/util/bpf_skel/augmented_syscalls.bpf.c that will eventually be
+ * done automagically caching the running kernel tracefs events data into an
+ * eBPF C script, that then gets compiled and its .o file cached for subsequent
+ * use. For char pointers like the ones for 'open' like syscalls its easy, for
+ * the rest we should use DWARF or better, BTF, much more compact.
+ *
+ * @size: 8 if all we need is an integer, otherwise all of the augmented arg.
+ * @int_arg: will be used for integer like pointer contents, like 'accept's 'upeer_addrlen'
+ * @value: u64 aligned, for structs, pathnames
+ */
+struct augmented_arg {
+	int  size;
+	int  int_arg;
+	u64  value[];
+};
+
+struct syscall_arg_fmt;
+
+/**
+ * @val: value of syscall argument being formatted
+ * @len: for tracepoint dynamic arrays, if fmt->nr_entries == 0, then its not a fixed array, look at arg->len
+ * @args: All the args, use syscall_args__val(arg, nth) to access one
+ * @augmented_args: Extra data that can be collected, for instance, with eBPF for expanding the pathname for open, etc
+ * @augmented_args_size: augmented_args total payload size
+ * @thread: tid state (maps, pid, tid, etc)
+ * @trace: 'perf trace' internals: all threads, etc
+ * @parm: private area, may be an strarray, for instance
+ * @idx: syscall arg idx (is this the first?)
+ * @mask: a syscall arg may mask another arg, see syscall_arg__scnprintf_futex_op
+ * @show_string_prefix: When there is a common prefix in a string table, show it or not
+ */
+
+struct syscall_arg {
+	unsigned long val;
+	unsigned char *args;
+	struct syscall_arg_fmt *fmt;
+	struct {
+		struct augmented_arg *args;
+		int		     size;
+	} augmented;
+	struct thread *thread;
+	struct trace  *trace;
+	void	      *parm;
+	char	      *type_name;
+	u16	      len;
+	u8	      idx;
+	u8	      mask;
+	bool	      show_string_prefix;
+};
+
+unsigned long syscall_arg__val(struct syscall_arg *arg, u8 idx);
+
+size_t syscall_arg__scnprintf_strarray_flags(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_STRARRAY_FLAGS syscall_arg__scnprintf_strarray_flags
+
+bool syscall_arg__strtoul_strarray(char *bf, size_t size, struct syscall_arg *arg, u64 *ret);
+#define STUL_STRARRAY syscall_arg__strtoul_strarray
+
+bool syscall_arg__strtoul_strarray_flags(char *bf, size_t size, struct syscall_arg *arg, u64 *ret);
+#define STUL_STRARRAY_FLAGS syscall_arg__strtoul_strarray_flags
+
+bool syscall_arg__strtoul_strarrays(char *bf, size_t size, struct syscall_arg *arg, u64 *ret);
+#define STUL_STRARRAYS syscall_arg__strtoul_strarrays
+
+size_t syscall_arg__scnprintf_x86_irq_vectors(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_X86_IRQ_VECTORS syscall_arg__scnprintf_x86_irq_vectors
+
+bool syscall_arg__strtoul_x86_irq_vectors(char *bf, size_t size, struct syscall_arg *arg, u64 *ret);
+#define STUL_X86_IRQ_VECTORS syscall_arg__strtoul_x86_irq_vectors
+
+size_t syscall_arg__scnprintf_x86_MSR(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_X86_MSR syscall_arg__scnprintf_x86_MSR
+
+bool syscall_arg__strtoul_x86_MSR(char *bf, size_t size, struct syscall_arg *arg, u64 *ret);
+#define STUL_X86_MSR syscall_arg__strtoul_x86_MSR
+
+size_t syscall_arg__scnprintf_strarrays(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_STRARRAYS syscall_arg__scnprintf_strarrays
+
+size_t syscall_arg__scnprintf_fd(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_FD syscall_arg__scnprintf_fd
+
+size_t syscall_arg__scnprintf_hex(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_HEX syscall_arg__scnprintf_hex
+
+size_t syscall_arg__scnprintf_ptr(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_PTR syscall_arg__scnprintf_ptr
+
+size_t syscall_arg__scnprintf_int(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_INT syscall_arg__scnprintf_int
+
+size_t syscall_arg__scnprintf_long(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_LONG syscall_arg__scnprintf_long
+
+size_t syscall_arg__scnprintf_pid(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_PID syscall_arg__scnprintf_pid
+
+size_t syscall_arg__scnprintf_clone_flags(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_CLONE_FLAGS syscall_arg__scnprintf_clone_flags
+
+size_t syscall_arg__scnprintf_fcntl_cmd(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_FCNTL_CMD syscall_arg__scnprintf_fcntl_cmd
+
+size_t syscall_arg__scnprintf_fcntl_arg(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_FCNTL_ARG syscall_arg__scnprintf_fcntl_arg
+
+size_t syscall_arg__scnprintf_flock(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_FLOCK syscall_arg__scnprintf_flock
+
+size_t syscall_arg__scnprintf_fsmount_flags(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_FSMOUNT_FLAGS syscall_arg__scnprintf_fsmount_flags
+
+size_t syscall_arg__scnprintf_fsmount_attr_flags(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_FSMOUNT_ATTR_FLAGS syscall_arg__scnprintf_fsmount_attr_flags
+
+size_t syscall_arg__scnprintf_fspick_flags(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_FSPICK_FLAGS syscall_arg__scnprintf_fspick_flags
+
+size_t syscall_arg__scnprintf_ioctl_cmd(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_IOCTL_CMD syscall_arg__scnprintf_ioctl_cmd
+
+size_t syscall_arg__scnprintf_kcmp_type(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_KCMP_TYPE syscall_arg__scnprintf_kcmp_type
+
+size_t syscall_arg__scnprintf_kcmp_idx(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_KCMP_IDX syscall_arg__scnprintf_kcmp_idx
+
+unsigned long syscall_arg__mask_val_mount_flags(struct syscall_arg *arg, unsigned long flags);
+#define SCAMV_MOUNT_FLAGS syscall_arg__mask_val_mount_flags
+
+size_t syscall_arg__scnprintf_mount_flags(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_MOUNT_FLAGS syscall_arg__scnprintf_mount_flags
+
+size_t syscall_arg__scnprintf_move_mount_flags(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_MOVE_MOUNT_FLAGS syscall_arg__scnprintf_move_mount_flags
+
+size_t syscall_arg__scnprintf_pkey_alloc_access_rights(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_PKEY_ALLOC_ACCESS_RIGHTS syscall_arg__scnprintf_pkey_alloc_access_rights
+
+size_t syscall_arg__scnprintf_open_flags(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_OPEN_FLAGS syscall_arg__scnprintf_open_flags
+
+size_t syscall_arg__scnprintf_x86_arch_prctl_code(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_X86_ARCH_PRCTL_CODE syscall_arg__scnprintf_x86_arch_prctl_code
+
+size_t syscall_arg__scnprintf_prctl_option(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_PRCTL_OPTION syscall_arg__scnprintf_prctl_option
+
+extern struct strarray strarray__prctl_options;
+
+size_t syscall_arg__scnprintf_prctl_arg2(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_PRCTL_ARG2 syscall_arg__scnprintf_prctl_arg2
+
+size_t syscall_arg__scnprintf_prctl_arg3(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_PRCTL_ARG3 syscall_arg__scnprintf_prctl_arg3
+
+size_t syscall_arg__scnprintf_renameat2_flags(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_RENAMEAT2_FLAGS syscall_arg__scnprintf_renameat2_flags
+
+size_t syscall_arg__scnprintf_sockaddr(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_SOCKADDR syscall_arg__scnprintf_sockaddr
+
+// 'argname' is just documentational at this point, to remove the previous comment with that info
+#define SCA_SOCKADDR_FROM_USER(argname) \
+	  { .scnprintf	= SCA_SOCKADDR, \
+	    .from_user	= true, }
+
+size_t syscall_arg__scnprintf_socket_protocol(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_SK_PROTO syscall_arg__scnprintf_socket_protocol
+
+size_t syscall_arg__scnprintf_socket_level(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_SK_LEVEL syscall_arg__scnprintf_socket_level
+
+size_t syscall_arg__scnprintf_fs_at_flags(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_FS_AT_FLAGS syscall_arg__scnprintf_fs_at_flags
+
+size_t syscall_arg__scnprintf_faccessat2_flags(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_FACCESSAT2_FLAGS syscall_arg__scnprintf_faccessat2_flags
+
+size_t syscall_arg__scnprintf_statx_mask(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_STATX_MASK syscall_arg__scnprintf_statx_mask
+
+size_t syscall_arg__scnprintf_sync_file_range_flags(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_SYNC_FILE_RANGE_FLAGS syscall_arg__scnprintf_sync_file_range_flags
+
+size_t syscall_arg__scnprintf_timespec(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_TIMESPEC syscall_arg__scnprintf_timespec
+
+// 'argname' is just documentational at this point, to remove the previous comment with that info
+#define SCA_TIMESPEC_FROM_USER(argname) \
+	  { .scnprintf	= SCA_TIMESPEC, \
+	    .from_user	= true, }
+
+size_t open__scnprintf_flags(unsigned long flags, char *bf, size_t size, bool show_prefix);
+
+void syscall_arg__set_ret_scnprintf(struct syscall_arg *arg,
+				    size_t (*ret_scnprintf)(char *bf, size_t size, struct syscall_arg *arg));
+
+extern struct strarray strarray__fsconfig_cmds;
+
+size_t syscall_arg__scnprintf_eventfd_flags(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_EFD_FLAGS syscall_arg__scnprintf_eventfd_flags
+
+size_t syscall_arg__scnprintf_futex_op(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_FUTEX_OP syscall_arg__scnprintf_futex_op
+
+size_t syscall_arg__scnprintf_futex_val3(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_FUTEX_VAL3 syscall_arg__scnprintf_futex_val3
+
+size_t syscall_arg__scnprintf_mmap_prot(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_MMAP_PROT syscall_arg__scnprintf_mmap_prot
+
+extern struct strarray strarray__mmap_flags;
+
+size_t syscall_arg__scnprintf_mmap_flags(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_MMAP_FLAGS syscall_arg__scnprintf_mmap_flags
+
+size_t syscall_arg__scnprintf_mremap_flags(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_MREMAP_FLAGS syscall_arg__scnprintf_mremap_flags
+
+size_t syscall_arg__scnprintf_madvise_behavior(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_MADV_BHV syscall_arg__scnprintf_madvise_behavior
+
+size_t syscall_arg__scnprintf_mode_t(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_MODE_T syscall_arg__scnprintf_mode_t
+
+size_t syscall_arg__scnprintf_msg_flags(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_MSG_FLAGS syscall_arg__scnprintf_msg_flags
+
+size_t syscall_arg__scnprintf_perf_flags(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_PERF_FLAGS syscall_arg__scnprintf_perf_flags
+
+size_t syscall_arg__scnprintf_perf_event_attr(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_PERF_ATTR syscall_arg__scnprintf_perf_event_attr
+#define SCA_PERF_ATTR_FROM_USER(argname) \
+	{ .scnprintf	= SCA_PERF_ATTR, \
+	  .from_user	= true, }
+
+size_t syscall_arg__scnprintf_sched_policy(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_SCHED_POLICY syscall_arg__scnprintf_sched_policy
+
+size_t syscall_arg__scnprintf_seccomp_op(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_SECCOMP_OP syscall_arg__scnprintf_seccomp_op
+
+size_t syscall_arg__scnprintf_seccomp_flags(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_SECCOMP_FLAGS syscall_arg__scnprintf_seccomp_flags
+
+size_t syscall_arg__scnprintf_signum(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_SIGNUM syscall_arg__scnprintf_signum
+
+size_t syscall_arg__scnprintf_socket_type(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_SK_TYPE syscall_arg__scnprintf_socket_type
+
+size_t syscall_arg__scnprintf_waitid_options(char *bf, size_t size, struct syscall_arg *arg);
+#define SCA_WAITID_OPTIONS syscall_arg__scnprintf_waitid_options
+
+#endif /* _PERF_TRACE_BEAUTY_H */
diff --git a/tools/perf/trace/beauty/clone.c b/tools/perf/trace/beauty/clone.c
new file mode 100644
index 000000000..c9fa8f7e8
--- /dev/null
+++ b/tools/perf/trace/beauty/clone.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: LGPL-2.1
+/*
+ * trace/beauty/cone.c
+ *
+ *  Copyright (C) 2017, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+ */
+
+#include "trace/beauty/beauty.h"
+#include <linux/kernel.h>
+#include <linux/log2.h>
+#include <sys/types.h>
+#include <sched.h>
+
+static size_t clone__scnprintf_flags(unsigned long flags, char *bf, size_t size, bool show_prefix)
+{
+#include "trace/beauty/generated/clone_flags_array.c"
+	static DEFINE_STRARRAY(clone_flags, "CLONE_");
+
+	return strarray__scnprintf_flags(&strarray__clone_flags, bf, size, show_prefix, flags);
+}
+
+size_t syscall_arg__scnprintf_clone_flags(char *bf, size_t size, struct syscall_arg *arg)
+{
+	unsigned long flags = arg->val;
+	enum syscall_clone_args {
+		SCC_FLAGS	  = (1 << 0),
+		SCC_CHILD_STACK	  = (1 << 1),
+		SCC_PARENT_TIDPTR = (1 << 2),
+		SCC_CHILD_TIDPTR  = (1 << 3),
+		SCC_TLS		  = (1 << 4),
+	};
+	if (!(flags & CLONE_PARENT_SETTID))
+		arg->mask |= SCC_PARENT_TIDPTR;
+
+	if (!(flags & (CLONE_CHILD_SETTID | CLONE_CHILD_CLEARTID)))
+		arg->mask |= SCC_CHILD_TIDPTR;
+
+	if (!(flags & CLONE_SETTLS))
+		arg->mask |= SCC_TLS;
+
+	return clone__scnprintf_flags(flags, bf, size, arg->show_string_prefix);
+}
diff --git a/tools/perf/trace/beauty/clone.sh b/tools/perf/trace/beauty/clone.sh
new file mode 100755
index 000000000..98cb1f8d4
--- /dev/null
+++ b/tools/perf/trace/beauty/clone.sh
@@ -0,0 +1,21 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+if [ $# -ne 1 ] ; then
+	beauty_uapi_linux_dir=tools/perf/trace/beauty/include/uapi/linux/
+else
+	beauty_uapi_linux_dir=$1
+fi
+
+linux_sched=${beauty_uapi_linux_dir}/sched.h
+
+printf "static const char *clone_flags[] = {\n"
+regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+CLONE_([^_]+[[:alnum:]_]+)[[:space:]]+(0x[[:xdigit:]]+)[[:space:]]*.*'
+grep -E $regex ${linux_sched} | \
+	sed -r "s/$regex/\2 \1/g"	| \
+	xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n"
+regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+CLONE_([^_]+[[:alnum:]_]+)[[:space:]]+\(1ULL[[:space:]]*<<[[:space:]]*([[:digit:]]+)\)[[:space:]]*.*'
+grep -E $regex ${linux_sched} | \
+	sed -r "s/$regex/\2 \1/g"	| \
+	xargs printf "\t[%s + 1] = \"%s\",\n"
+printf "};\n"
diff --git a/tools/perf/trace/beauty/drm_ioctl.sh b/tools/perf/trace/beauty/drm_ioctl.sh
new file mode 100755
index 000000000..f2f1a257b
--- /dev/null
+++ b/tools/perf/trace/beauty/drm_ioctl.sh
@@ -0,0 +1,15 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+[ $# -eq 1 ] && header_dir=$1 || header_dir=tools/perf/trace/beauty/include/uapi/drm/
+
+printf "#ifndef DRM_COMMAND_BASE\n"
+grep "#define DRM_COMMAND_BASE" $header_dir/drm.h
+printf "#endif\n"
+
+printf "static const char *drm_ioctl_cmds[] = {\n"
+grep "^#define DRM_IOCTL.*DRM_IO" $header_dir/drm.h | \
+	sed -r 's/^#define +DRM_IOCTL_([A-Z0-9_]+)[	 ]+DRM_IO[A-Z]* *\( *(0x[[:xdigit:]]+),*.*/	[\2] = "\1",/g'
+grep "^#define DRM_I915_[A-Z_0-9]\+[	 ]\+0x" $header_dir/i915_drm.h | \
+	sed -r 's/^#define +DRM_I915_([A-Z0-9_]+)[	 ]+(0x[[:xdigit:]]+)/\t[DRM_COMMAND_BASE + \2] = "I915_\1",/g'
+printf "};\n"
diff --git a/tools/perf/trace/beauty/eventfd.c b/tools/perf/trace/beauty/eventfd.c
new file mode 100644
index 000000000..18b661282
--- /dev/null
+++ b/tools/perf/trace/beauty/eventfd.c
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: LGPL-2.1
+#include "trace/beauty/beauty.h"
+
+#ifndef EFD_SEMAPHORE
+#define EFD_SEMAPHORE		1
+#endif
+
+#ifndef EFD_NONBLOCK
+#define EFD_NONBLOCK		00004000
+#endif
+
+#ifndef EFD_CLOEXEC
+#define EFD_CLOEXEC		02000000
+#endif
+
+size_t syscall_arg__scnprintf_eventfd_flags(char *bf, size_t size, struct syscall_arg *arg)
+{
+	bool show_prefix = arg->show_string_prefix;
+	const char *prefix = "EFD_";
+	int printed = 0, flags = arg->val;
+
+	if (flags == 0)
+		return scnprintf(bf, size, "NONE");
+#define	P_FLAG(n) \
+	if (flags & EFD_##n) { \
+		printed += scnprintf(bf + printed, size - printed, "%s%s%s", printed ? "|" : "", show_prefix ? prefix : "", #n); \
+		flags &= ~EFD_##n; \
+	}
+
+	P_FLAG(SEMAPHORE);
+	P_FLAG(CLOEXEC);
+	P_FLAG(NONBLOCK);
+#undef P_FLAG
+
+	if (flags)
+		printed += scnprintf(bf + printed, size - printed, "%s%#x", printed ? "|" : "", flags);
+
+	return printed;
+}
diff --git a/tools/perf/trace/beauty/fadvise.sh b/tools/perf/trace/beauty/fadvise.sh
new file mode 100755
index 000000000..e9857112f
--- /dev/null
+++ b/tools/perf/trace/beauty/fadvise.sh
@@ -0,0 +1,22 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+[ $# -eq 1 ] && header_dir=$1 || header_dir=tools/perf/trace/beauty/include/uapi/linux/
+
+printf "static const char *fadvise_advices[] = {\n"
+regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+POSIX_FADV_(\w+)[[:space:]]+([[:digit:]]+)[[:space:]]+.*'
+
+grep -E $regex ${header_dir}/fadvise.h | \
+	sed -r "s/$regex/\2 \1/g"	| \
+	sort | xargs printf "\t[%s] = \"%s\",\n" | \
+	grep -v "[6].*DONTNEED" | grep -v "[7].*NOREUSE"
+printf "};\n"
+
+# XXX Fix this properly:
+
+# The grep 6/7 DONTNEED/NOREUSE are a hack to filter out the s/390 oddity See
+# tools/include/uapi/linux/fadvise.h for details.
+
+# Probably fix this when generating the string tables per arch so that We can
+# reliably process on arch FOO a perf.data file collected by 'perf trace
+# record' on arch BAR, e.g. collect on s/390 and process on x86.
diff --git a/tools/perf/trace/beauty/fcntl.c b/tools/perf/trace/beauty/fcntl.c
new file mode 100644
index 000000000..e1b99b8f5
--- /dev/null
+++ b/tools/perf/trace/beauty/fcntl.c
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: LGPL-2.1
+/*
+ * trace/beauty/fcntl.c
+ *
+ *  Copyright (C) 2017, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+ */
+
+#include "trace/beauty/beauty.h"
+#include <linux/kernel.h>
+#include <linux/fcntl.h>
+
+#ifndef F_GET_RW_HINT
+#define F_GET_RW_HINT		(F_LINUX_SPECIFIC_BASE + 11)
+#endif
+
+#ifndef F_SET_RW_HINT
+#define F_SET_RW_HINT		(F_LINUX_SPECIFIC_BASE + 12)
+#endif
+
+#ifndef F_GET_FILE_RW_HINT
+#define F_GET_FILE_RW_HINT	(F_LINUX_SPECIFIC_BASE + 13)
+#endif
+
+#ifndef F_SET_FILE_RW_HINT
+#define F_SET_FILE_RW_HINT	(F_LINUX_SPECIFIC_BASE + 14)
+#endif
+
+static size_t fcntl__scnprintf_getfd(unsigned long val, char *bf, size_t size, bool show_prefix)
+{
+	return val ? scnprintf(bf, size, "%s", "0") :
+		     scnprintf(bf, size, "%s%s", show_prefix ? "FD_" : "", "CLOEXEC");
+}
+
+static size_t syscall_arg__scnprintf_fcntl_getfd(char *bf, size_t size, struct syscall_arg *arg)
+{
+	return fcntl__scnprintf_getfd(arg->val, bf, size, arg->show_string_prefix);
+}
+
+static size_t fcntl__scnprintf_getlease(unsigned long val, char *bf, size_t size, bool show_prefix)
+{
+	static const char *fcntl_setlease[] = { "RDLCK", "WRLCK", "UNLCK", };
+	static DEFINE_STRARRAY(fcntl_setlease, "F_");
+
+	return strarray__scnprintf(&strarray__fcntl_setlease, bf, size, "%x", show_prefix, val);
+}
+
+static size_t syscall_arg__scnprintf_fcntl_getlease(char *bf, size_t size, struct syscall_arg *arg)
+{
+	return fcntl__scnprintf_getlease(arg->val, bf, size, arg->show_string_prefix);
+}
+
+size_t syscall_arg__scnprintf_fcntl_cmd(char *bf, size_t size, struct syscall_arg *arg)
+{
+	if (arg->val == F_GETFL) {
+		syscall_arg__set_ret_scnprintf(arg, syscall_arg__scnprintf_open_flags);
+		goto mask_arg;
+	}
+	if (arg->val == F_GETFD) {
+		syscall_arg__set_ret_scnprintf(arg, syscall_arg__scnprintf_fcntl_getfd);
+		goto mask_arg;
+	}
+	if (arg->val == F_DUPFD_CLOEXEC || arg->val == F_DUPFD) {
+		syscall_arg__set_ret_scnprintf(arg, syscall_arg__scnprintf_fd);
+		goto out;
+	}
+	if (arg->val == F_GETOWN) {
+		syscall_arg__set_ret_scnprintf(arg, syscall_arg__scnprintf_pid);
+		goto mask_arg;
+	}
+	if (arg->val == F_GETLEASE) {
+		syscall_arg__set_ret_scnprintf(arg, syscall_arg__scnprintf_fcntl_getlease);
+		goto mask_arg;
+	}
+	/*
+	 * Some commands ignore the third fcntl argument, "arg", so mask it
+	 */
+	if (arg->val == F_GET_SEALS ||
+	    arg->val == F_GETSIG) {
+mask_arg:
+		arg->mask |= (1 << 2);
+	}
+out:
+	return syscall_arg__scnprintf_strarrays(bf, size, arg);
+}
+
+size_t syscall_arg__scnprintf_fcntl_arg(char *bf, size_t size, struct syscall_arg *arg)
+{
+	bool show_prefix = arg->show_string_prefix;
+	int cmd = syscall_arg__val(arg, 1);
+
+	if (cmd == F_DUPFD)
+		return syscall_arg__scnprintf_fd(bf, size, arg);
+
+	if (cmd == F_SETFD)
+		return fcntl__scnprintf_getfd(arg->val, bf, size, show_prefix);
+
+	if (cmd == F_SETFL)
+		return open__scnprintf_flags(arg->val, bf, size, show_prefix);
+
+	if (cmd == F_SETOWN)
+		return syscall_arg__scnprintf_pid(bf, size, arg);
+
+	if (cmd == F_SETLEASE)
+		return fcntl__scnprintf_getlease(arg->val, bf, size, show_prefix);
+	/*
+	 * We still don't grab the contents of pointers on entry or exit,
+	 * so just print them as hex numbers
+	 */
+	if (cmd == F_SETLK || cmd == F_SETLKW || cmd == F_GETLK ||
+	    cmd == F_OFD_SETLK || cmd == F_OFD_SETLKW || cmd == F_OFD_GETLK ||
+	    cmd == F_GETOWN_EX || cmd == F_SETOWN_EX ||
+	    cmd == F_GET_RW_HINT || cmd == F_SET_RW_HINT ||
+	    cmd == F_GET_FILE_RW_HINT || cmd == F_SET_FILE_RW_HINT)
+		return syscall_arg__scnprintf_hex(bf, size, arg);
+
+	return syscall_arg__scnprintf_long(bf, size, arg);
+}
diff --git a/tools/perf/trace/beauty/flock.c b/tools/perf/trace/beauty/flock.c
new file mode 100644
index 000000000..a6514a6f0
--- /dev/null
+++ b/tools/perf/trace/beauty/flock.c
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: LGPL-2.1
+
+#include "trace/beauty/beauty.h"
+#include <linux/kernel.h>
+#include <linux/fcntl.h>
+
+#ifndef LOCK_MAND
+#define LOCK_MAND	 32
+#endif
+
+#ifndef LOCK_READ
+#define LOCK_READ	 64
+#endif
+
+#ifndef LOCK_WRITE
+#define LOCK_WRITE	128
+#endif
+
+#ifndef LOCK_RW
+#define LOCK_RW		192
+#endif
+
+size_t syscall_arg__scnprintf_flock(char *bf, size_t size, struct syscall_arg *arg)
+{
+	bool show_prefix = arg->show_string_prefix;
+	const char *prefix = "LOCK_";
+	int printed = 0, op = arg->val;
+
+	if (op == 0)
+		return scnprintf(bf, size, "NONE");
+#define	P_CMD(cmd) \
+	if ((op & LOCK_##cmd) == LOCK_##cmd) { \
+		printed += scnprintf(bf + printed, size - printed, "%s%s%s", printed ? "|" : "", show_prefix ? prefix : "", #cmd); \
+		op &= ~LOCK_##cmd; \
+	}
+
+	P_CMD(SH);
+	P_CMD(EX);
+	P_CMD(NB);
+	P_CMD(UN);
+	P_CMD(MAND);
+	P_CMD(RW);
+	P_CMD(READ);
+	P_CMD(WRITE);
+#undef P_OP
+
+	if (op)
+		printed += scnprintf(bf + printed, size - printed, "%s%#x", printed ? "|" : "", op);
+
+	return printed;
+}
diff --git a/tools/perf/trace/beauty/fs_at_flags.c b/tools/perf/trace/beauty/fs_at_flags.c
new file mode 100644
index 000000000..c200669cb
--- /dev/null
+++ b/tools/perf/trace/beauty/fs_at_flags.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: LGPL-2.1
+/*
+ * trace/beauty/fs_at_flags.c
+ *
+ *  Copyright (C) 2017, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+ */
+
+#include "trace/beauty/beauty.h"
+#include <sys/types.h>
+#include <linux/fcntl.h>
+#include <linux/log2.h>
+
+/*
+ * uapi/linux/fcntl.h does not keep a copy in tools headers directory,
+ * for system with kernel versions before v5.8, need to sync AT_EACCESS macro.
+ */
+#ifndef AT_EACCESS
+#define AT_EACCESS 0x200
+#endif
+
+#include "trace/beauty/generated/fs_at_flags_array.c"
+static DEFINE_STRARRAY(fs_at_flags, "AT_");
+
+static size_t fs_at__scnprintf_flags(unsigned long flags, char *bf, size_t size, bool show_prefix)
+{
+	return strarray__scnprintf_flags(&strarray__fs_at_flags, bf, size, show_prefix, flags);
+}
+
+size_t syscall_arg__scnprintf_fs_at_flags(char *bf, size_t size, struct syscall_arg *arg)
+{
+	bool show_prefix = arg->show_string_prefix;
+	int flags = arg->val;
+
+	return fs_at__scnprintf_flags(flags, bf, size, show_prefix);
+}
+
+static size_t faccessat2__scnprintf_flags(unsigned long flags, char *bf, size_t size, bool show_prefix)
+{
+	int printed = 0;
+
+	// AT_EACCESS is the same as AT_REMOVEDIR, that is in fs_at_flags_array,
+	// special case it here.
+	if (flags & AT_EACCESS) {
+		flags &= ~AT_EACCESS;
+		printed += scnprintf(bf + printed, size - printed, "%sEACCESS%s",
+				     show_prefix ? strarray__fs_at_flags.prefix : "", flags ? "|" : "");
+	}
+
+	return strarray__scnprintf_flags(&strarray__fs_at_flags, bf + printed, size - printed, show_prefix, flags);
+}
+
+size_t syscall_arg__scnprintf_faccessat2_flags(char *bf, size_t size, struct syscall_arg *arg)
+{
+	bool show_prefix = arg->show_string_prefix;
+	int flags = arg->val;
+
+	return faccessat2__scnprintf_flags(flags, bf, size, show_prefix);
+}
diff --git a/tools/perf/trace/beauty/fs_at_flags.sh b/tools/perf/trace/beauty/fs_at_flags.sh
new file mode 100755
index 000000000..fac4d0c04
--- /dev/null
+++ b/tools/perf/trace/beauty/fs_at_flags.sh
@@ -0,0 +1,27 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+if [ $# -ne 1 ] ; then
+	beauty_uapi_linux_dir=tools/perf/trace/beauty/include/uapi/linux/
+else
+	beauty_uapi_linux_dir=$1
+fi
+
+linux_fcntl=${beauty_uapi_linux_dir}/fcntl.h
+
+printf "static const char *fs_at_flags[] = {\n"
+regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+AT_([^_]+[[:alnum:]_]+)[[:space:]]+(0x[[:xdigit:]]+)[[:space:]]*.*'
+# AT_EACCESS is only meaningful to faccessat, so we will special case it there...
+# AT_STATX_SYNC_TYPE is not a bit, its a mask of AT_STATX_SYNC_AS_STAT, AT_STATX_FORCE_SYNC and AT_STATX_DONT_SYNC
+# AT_HANDLE_FID, AT_HANDLE_MNT_ID_UNIQUE and AT_HANDLE_CONNECTABLE are reusing values and are valid only for name_to_handle_at()
+# AT_RENAME_NOREPLACE reuses 0x1 and is valid only for renameat2()
+grep -E $regex ${linux_fcntl} | \
+	grep -v AT_EACCESS | \
+	grep -v AT_STATX_SYNC_TYPE | \
+	grep -v AT_HANDLE_FID | \
+	grep -v AT_HANDLE_MNT_ID_UNIQUE | \
+	grep -v AT_HANDLE_CONNECTABLE | \
+	grep -v AT_RENAME_NOREPLACE | \
+	sed -r "s/$regex/\2 \1/g"	| \
+	xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n"
+printf "};\n"
diff --git a/tools/perf/trace/beauty/fsconfig.c b/tools/perf/trace/beauty/fsconfig.c
new file mode 100644
index 000000000..98aa05315
--- /dev/null
+++ b/tools/perf/trace/beauty/fsconfig.c
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: LGPL-2.1
+#include "trace/beauty/beauty.h"
+#include "trace/beauty/generated/fsconfig_arrays.c"
+
+DEFINE_STRARRAY(fsconfig_cmds, "FSCONFIG_");
diff --git a/tools/perf/trace/beauty/fsconfig.sh b/tools/perf/trace/beauty/fsconfig.sh
new file mode 100755
index 000000000..09cee79de
--- /dev/null
+++ b/tools/perf/trace/beauty/fsconfig.sh
@@ -0,0 +1,16 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+if [ $# -ne 1 ] ; then
+	beauty_uapi_linux_dir=tools/perf/trace/beauty/include/uapi/linux/
+else
+	beauty_uapi_linux_dir=$1
+fi
+
+linux_mount=${beauty_uapi_linux_dir}/mount.h
+
+printf "static const char *fsconfig_cmds[] = {\n"
+ms='[[:space:]]*'
+sed -nr "s/^${ms}FSCONFIG_([[:alnum:]_]+)${ms}=${ms}([[:digit:]]+)${ms},.*/\t[\2] = \"\1\",/p" \
+	${linux_mount}
+printf "};\n"
diff --git a/tools/perf/trace/beauty/fsmount.c b/tools/perf/trace/beauty/fsmount.c
new file mode 100644
index 000000000..179e649fc
--- /dev/null
+++ b/tools/perf/trace/beauty/fsmount.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: LGPL-2.1
+/*
+ * trace/beauty/fsmount.c
+ *
+ *  Copyright (C) 2019, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+ */
+
+#include "trace/beauty/beauty.h"
+#include <linux/log2.h>
+#include <sys/mount.h>
+
+#ifndef MOUNT_ATTR__ATIME
+#define MOUNT_ATTR__ATIME	0x00000070 /* Setting on how atime should be updated */
+#endif
+#ifndef MOUNT_ATTR_RELATIME
+#define MOUNT_ATTR_RELATIME	0x00000000 /* - Update atime relative to mtime/ctime. */
+#endif
+
+
+static size_t fsmount__scnprintf_flags(unsigned long flags, char *bf, size_t size, bool show_prefix)
+{
+#include "trace/beauty/generated/fsmount_arrays.c"
+	static DEFINE_STRARRAY(fsmount_flags, "FSMOUNT_");
+
+	return strarray__scnprintf_flags(&strarray__fsmount_flags, bf, size, show_prefix, flags);
+}
+
+size_t syscall_arg__scnprintf_fsmount_flags(char *bf, size_t size, struct syscall_arg *arg)
+{
+	unsigned long flags = arg->val;
+
+	return fsmount__scnprintf_flags(flags, bf, size, arg->show_string_prefix);
+}
+
+static size_t fsmount__scnprintf_attr_flags(unsigned long flags, char *bf, size_t size, bool show_prefix)
+{
+#include "trace/beauty/generated/fsmount_attr_arrays.c"
+       static DEFINE_STRARRAY(fsmount_attr_flags, "MOUNT_ATTR_");
+       size_t printed = 0;
+
+       if ((flags & ~MOUNT_ATTR__ATIME) != 0)
+	       printed += strarray__scnprintf_flags(&strarray__fsmount_attr_flags, bf, size, show_prefix, flags);
+
+       if ((flags & MOUNT_ATTR__ATIME) == MOUNT_ATTR_RELATIME) {
+	       printed += scnprintf(bf + printed, size - printed, "%s%s%s",
+			            printed ? "|" : "", show_prefix ? "MOUNT_ATTR_" : "", "RELATIME");
+       }
+
+       return printed;
+}
+
+size_t syscall_arg__scnprintf_fsmount_attr_flags(char *bf, size_t size, struct syscall_arg *arg)
+{
+	unsigned long flags = arg->val;
+
+	return fsmount__scnprintf_attr_flags(flags, bf, size, arg->show_string_prefix);
+}
diff --git a/tools/perf/trace/beauty/fsmount.sh b/tools/perf/trace/beauty/fsmount.sh
new file mode 100755
index 000000000..6d1e80bc1
--- /dev/null
+++ b/tools/perf/trace/beauty/fsmount.sh
@@ -0,0 +1,17 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+if [ $# -ne 1 ] ; then
+	beauty_uapi_linux_dir=tools/perf/trace/beauty/include/uapi/linux/
+else
+	beauty_uapi_linux_dir=$1
+fi
+
+linux_mount=${beauty_uapi_linux_dir}/mount.h
+
+printf "static const char *fsmount_flags[] = {\n"
+regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+FSMOUNT_([[:alnum:]][[:alnum:]_]+)[[:space:]]+(0x[[:xdigit:]]+)[[:space:]]*.*'
+grep -E $regex ${linux_mount} | \
+	sed -r "s/$regex/\2 \1/g"	| \
+	xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n"
+printf "};\n"
diff --git a/tools/perf/trace/beauty/fsmount_attr.sh b/tools/perf/trace/beauty/fsmount_attr.sh
new file mode 100644
index 000000000..6b67a54cd
--- /dev/null
+++ b/tools/perf/trace/beauty/fsmount_attr.sh
@@ -0,0 +1,22 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+if [ $# -ne 1 ] ; then
+	beauty_uapi_linux_dir=tools/perf/trace/beauty/include/uapi/linux/
+else
+	beauty_uapi_linux_dir=$1
+fi
+
+linux_mount=${beauty_uapi_linux_dir}/mount.h
+
+# Remove MOUNT_ATTR_RELATIME as it is zeros, handle it a special way in the beautifier
+# Only handle MOUNT_ATTR_ followed by a capital letter/num as __ is special case
+# for things like MOUNT_ATTR__ATIME that is a mask for the possible ATIME handling
+# bits. Special case it as well in the beautifier
+
+printf "static const char *fsmount_attr_flags[] = {\n"
+regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+MOUNT_ATTR_([[:alnum:]][[:alnum:]_]+)[[:space:]]+(0x[[:xdigit:]]+)[[:space:]]*.*'
+grep -E $regex ${linux_mount} | grep -v MOUNT_ATTR_RELATIME | \
+	sed -r "s/$regex/\2 \1/g"	| \
+	xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n"
+printf "};\n"
diff --git a/tools/perf/trace/beauty/fspick.c b/tools/perf/trace/beauty/fspick.c
new file mode 100644
index 000000000..c402479c9
--- /dev/null
+++ b/tools/perf/trace/beauty/fspick.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: LGPL-2.1
+/*
+ * trace/beauty/fspick.c
+ *
+ *  Copyright (C) 2019, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+ */
+
+#include "trace/beauty/beauty.h"
+#include <linux/log2.h>
+
+static size_t fspick__scnprintf_flags(unsigned long flags, char *bf, size_t size, bool show_prefix)
+{
+#include "trace/beauty/generated/fspick_arrays.c"
+       static DEFINE_STRARRAY(fspick_flags, "FSPICK_");
+
+       return strarray__scnprintf_flags(&strarray__fspick_flags, bf, size, show_prefix, flags);
+}
+
+size_t syscall_arg__scnprintf_fspick_flags(char *bf, size_t size, struct syscall_arg *arg)
+{
+	unsigned long flags = arg->val;
+
+	return fspick__scnprintf_flags(flags, bf, size, arg->show_string_prefix);
+}
diff --git a/tools/perf/trace/beauty/fspick.sh b/tools/perf/trace/beauty/fspick.sh
new file mode 100755
index 000000000..0d9951c22
--- /dev/null
+++ b/tools/perf/trace/beauty/fspick.sh
@@ -0,0 +1,17 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+if [ $# -ne 1 ] ; then
+	beauty_uapi_linux_dir=tools/perf/trace/beauty/include/uapi/linux/
+else
+	beauty_uapi_linux_dir=$1
+fi
+
+linux_mount=${beauty_uapi_linux_dir}/mount.h
+
+printf "static const char *fspick_flags[] = {\n"
+regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+FSPICK_([[:alnum:]_]+)[[:space:]]+(0x[[:xdigit:]]+)[[:space:]]*.*'
+grep -E $regex ${linux_mount} | \
+	sed -r "s/$regex/\2 \1/g"	| \
+	xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n"
+printf "};\n"
diff --git a/tools/perf/trace/beauty/futex_op.c b/tools/perf/trace/beauty/futex_op.c
new file mode 100644
index 000000000..05d2111e5
--- /dev/null
+++ b/tools/perf/trace/beauty/futex_op.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: LGPL-2.1
+#include "trace/beauty/beauty.h"
+#include <linux/futex.h>
+
+#ifndef FUTEX_WAIT_BITSET
+#define FUTEX_WAIT_BITSET	  9
+#endif
+#ifndef FUTEX_WAKE_BITSET
+#define FUTEX_WAKE_BITSET	 10
+#endif
+#ifndef FUTEX_WAIT_REQUEUE_PI
+#define FUTEX_WAIT_REQUEUE_PI	 11
+#endif
+#ifndef FUTEX_CMP_REQUEUE_PI
+#define FUTEX_CMP_REQUEUE_PI	 12
+#endif
+#ifndef FUTEX_CLOCK_REALTIME
+#define FUTEX_CLOCK_REALTIME	256
+#endif
+
+size_t syscall_arg__scnprintf_futex_op(char *bf, size_t size, struct syscall_arg *arg)
+{
+	bool show_prefix = arg->show_string_prefix;
+	const char *prefix = "FUTEX_";
+	enum syscall_futex_args {
+		SCF_UADDR   = (1 << 0),
+		SCF_OP	    = (1 << 1),
+		SCF_VAL	    = (1 << 2),
+		SCF_TIMEOUT = (1 << 3),
+		SCF_UADDR2  = (1 << 4),
+		SCF_VAL3    = (1 << 5),
+	};
+	int op = arg->val;
+	int cmd = op & FUTEX_CMD_MASK;
+	size_t printed = 0;
+
+	switch (cmd) {
+#define	P_FUTEX_OP(n) case FUTEX_##n: printed = scnprintf(bf, size, "%s%s", show_prefix ? prefix : "", #n);
+	P_FUTEX_OP(WAIT);	    arg->mask |= SCF_VAL3|SCF_UADDR2;		  break;
+	P_FUTEX_OP(WAKE);	    arg->mask |= SCF_VAL3|SCF_UADDR2|SCF_TIMEOUT; break;
+	P_FUTEX_OP(FD);		    arg->mask |= SCF_VAL3|SCF_UADDR2|SCF_TIMEOUT; break;
+	P_FUTEX_OP(REQUEUE);	    arg->mask |= SCF_VAL3|SCF_TIMEOUT;	          break;
+	P_FUTEX_OP(CMP_REQUEUE);    arg->mask |= SCF_TIMEOUT;			  break;
+	P_FUTEX_OP(CMP_REQUEUE_PI); arg->mask |= SCF_TIMEOUT;			  break;
+	P_FUTEX_OP(WAKE_OP);							  break;
+	P_FUTEX_OP(LOCK_PI);	    arg->mask |= SCF_VAL3|SCF_UADDR2|SCF_TIMEOUT; break;
+	P_FUTEX_OP(UNLOCK_PI);	    arg->mask |= SCF_VAL3|SCF_UADDR2|SCF_TIMEOUT; break;
+	P_FUTEX_OP(TRYLOCK_PI);	    arg->mask |= SCF_VAL3|SCF_UADDR2;		  break;
+	P_FUTEX_OP(WAIT_BITSET);    arg->mask |= SCF_UADDR2;			  break;
+	P_FUTEX_OP(WAKE_BITSET);    arg->mask |= SCF_UADDR2;			  break;
+	P_FUTEX_OP(WAIT_REQUEUE_PI);						  break;
+	default: printed = scnprintf(bf, size, "%#x", cmd);			  break;
+	}
+
+	if (op & FUTEX_PRIVATE_FLAG)
+		printed += scnprintf(bf + printed, size - printed, "|%s%s", show_prefix ? prefix : "", "PRIVATE_FLAG");
+
+	if (op & FUTEX_CLOCK_REALTIME)
+		printed += scnprintf(bf + printed, size - printed, "|%s%s", show_prefix ? prefix : "", "CLOCK_REALTIME");
+
+	return printed;
+}
diff --git a/tools/perf/trace/beauty/futex_val3.c b/tools/perf/trace/beauty/futex_val3.c
new file mode 100644
index 000000000..fe4e82741
--- /dev/null
+++ b/tools/perf/trace/beauty/futex_val3.c
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: LGPL-2.1
+#include "trace/beauty/beauty.h"
+#include <linux/futex.h>
+
+#ifndef FUTEX_BITSET_MATCH_ANY
+#define FUTEX_BITSET_MATCH_ANY 0xffffffff
+#endif
+
+size_t syscall_arg__scnprintf_futex_val3(char *bf, size_t size, struct syscall_arg *arg)
+{
+	const char *prefix = "FUTEX_BITSET_";
+	unsigned int bitset = arg->val;
+
+	if (bitset == FUTEX_BITSET_MATCH_ANY)
+		return scnprintf(bf, size, "%s%s", arg->show_string_prefix ? prefix : "", "MATCH_ANY");
+
+	return scnprintf(bf, size, "%#xd", bitset);
+}
diff --git a/tools/perf/trace/beauty/include/linux/socket.h b/tools/perf/trace/beauty/include/linux/socket.h
new file mode 100644
index 000000000..2a8d7b14f
--- /dev/null
+++ b/tools/perf/trace/beauty/include/linux/socket.h
@@ -0,0 +1,478 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_SOCKET_H
+#define _LINUX_SOCKET_H
+
+
+#include <asm/socket.h>			/* arch-dependent defines	*/
+#include <linux/sockios.h>		/* the SIOCxxx I/O controls	*/
+#include <linux/uio.h>			/* iovec support		*/
+#include <linux/types.h>		/* pid_t			*/
+#include <linux/compiler.h>		/* __user			*/
+#include <uapi/linux/socket.h>
+
+struct file;
+struct pid;
+struct cred;
+struct socket;
+struct sock;
+struct sk_buff;
+struct proto_accept_arg;
+
+#define __sockaddr_check_size(size)	\
+	BUILD_BUG_ON(((size) > sizeof(struct __kernel_sockaddr_storage)))
+
+#ifdef CONFIG_PROC_FS
+struct seq_file;
+extern void socket_seq_show(struct seq_file *seq);
+#endif
+
+typedef __kernel_sa_family_t	sa_family_t;
+
+/*
+ *	1003.1g requires sa_family_t and that sa_data is char.
+ */
+
+/* Deprecated for in-kernel use. Use struct sockaddr_unsized instead. */
+struct sockaddr {
+	sa_family_t	sa_family;	/* address family, AF_xxx	*/
+	char		sa_data[14];	/* 14 bytes of protocol address	*/
+};
+
+/**
+ * struct sockaddr_unsized - Unspecified size sockaddr for callbacks
+ * @sa_family: Address family (AF_UNIX, AF_INET, AF_INET6, etc.)
+ * @sa_data: Flexible array for address data
+ *
+ * This structure is designed for callback interfaces where the
+ * total size is known via the sockaddr_len parameter. Unlike struct
+ * sockaddr which has a fixed 14-byte sa_data limit or struct
+ * sockaddr_storage which has a fixed 128-byte sa_data limit, this
+ * structure can accommodate addresses of any size, but must be used
+ * carefully.
+ */
+struct sockaddr_unsized {
+	__kernel_sa_family_t	sa_family;	/* address family, AF_xxx */
+	char			sa_data[];	/* flexible address data */
+};
+
+struct linger {
+	int		l_onoff;	/* Linger active		*/
+	int		l_linger;	/* How long to linger for	*/
+};
+
+#define sockaddr_storage __kernel_sockaddr_storage
+
+/*
+ *	As we do 4.4BSD message passing we use a 4.4BSD message passing
+ *	system, not 4.3. Thus msg_accrights(len) are now missing. They
+ *	belong in an obscure libc emulation or the bin.
+ */
+
+struct msghdr {
+	void		*msg_name;	/* ptr to socket address structure */
+	int		msg_namelen;	/* size of socket address structure */
+
+	int		msg_inq;	/* output, data left in socket */
+
+	struct iov_iter	msg_iter;	/* data */
+
+	/*
+	 * Ancillary data. msg_control_user is the user buffer used for the
+	 * recv* side when msg_control_is_user is set, msg_control is the kernel
+	 * buffer used for all other cases.
+	 */
+	union {
+		void		*msg_control;
+		void __user	*msg_control_user;
+	};
+	bool		msg_control_is_user : 1;
+	bool		msg_get_inq : 1;/* return INQ after receive */
+	unsigned int	msg_flags;	/* flags on received message */
+	__kernel_size_t	msg_controllen;	/* ancillary data buffer length */
+	struct ubuf_info *msg_ubuf;
+	int (*sg_from_iter)(struct sk_buff *skb,
+			    struct iov_iter *from, size_t length);
+};
+
+struct user_msghdr {
+	void		__user *msg_name;	/* ptr to socket address structure */
+	int		msg_namelen;		/* size of socket address structure */
+	struct iovec	__user *msg_iov;	/* scatter/gather array */
+	__kernel_size_t	msg_iovlen;		/* # elements in msg_iov */
+	void		__user *msg_control;	/* ancillary data */
+	__kernel_size_t	msg_controllen;		/* ancillary data buffer length */
+	unsigned int	msg_flags;		/* flags on received message */
+};
+
+/* For recvmmsg/sendmmsg */
+struct mmsghdr {
+	struct user_msghdr  msg_hdr;
+	unsigned int        msg_len;
+};
+
+/*
+ *	POSIX 1003.1g - ancillary data object information
+ *	Ancillary data consists of a sequence of pairs of
+ *	(cmsghdr, cmsg_data[])
+ */
+
+struct cmsghdr {
+	__kernel_size_t	cmsg_len;	/* data byte count, including hdr */
+        int		cmsg_level;	/* originating protocol */
+        int		cmsg_type;	/* protocol-specific type */
+};
+
+/*
+ *	Ancillary data object information MACROS
+ *	Table 5-14 of POSIX 1003.1g
+ */
+
+#define __CMSG_NXTHDR(ctl, len, cmsg) __cmsg_nxthdr((ctl),(len),(cmsg))
+#define CMSG_NXTHDR(mhdr, cmsg) cmsg_nxthdr((mhdr), (cmsg))
+
+#define CMSG_ALIGN(len) ( ((len)+sizeof(long)-1) & ~(sizeof(long)-1) )
+
+#define CMSG_DATA(cmsg) \
+	((void *)(cmsg) + sizeof(struct cmsghdr))
+#define CMSG_USER_DATA(cmsg) \
+	((void __user *)(cmsg) + sizeof(struct cmsghdr))
+#define CMSG_SPACE(len) (sizeof(struct cmsghdr) + CMSG_ALIGN(len))
+#define CMSG_LEN(len) (sizeof(struct cmsghdr) + (len))
+
+#define __CMSG_FIRSTHDR(ctl,len) ((len) >= sizeof(struct cmsghdr) ? \
+				  (struct cmsghdr *)(ctl) : \
+				  (struct cmsghdr *)NULL)
+#define CMSG_FIRSTHDR(msg)	__CMSG_FIRSTHDR((msg)->msg_control, (msg)->msg_controllen)
+#define CMSG_OK(mhdr, cmsg) ((cmsg)->cmsg_len >= sizeof(struct cmsghdr) && \
+			     (cmsg)->cmsg_len <= (unsigned long) \
+			     ((mhdr)->msg_controllen - \
+			      ((char *)(cmsg) - (char *)(mhdr)->msg_control)))
+#define for_each_cmsghdr(cmsg, msg) \
+	for (cmsg = CMSG_FIRSTHDR(msg); \
+	     cmsg; \
+	     cmsg = CMSG_NXTHDR(msg, cmsg))
+
+/*
+ *	Get the next cmsg header
+ *
+ *	PLEASE, do not touch this function. If you think, that it is
+ *	incorrect, grep kernel sources and think about consequences
+ *	before trying to improve it.
+ *
+ *	Now it always returns valid, not truncated ancillary object
+ *	HEADER. But caller still MUST check, that cmsg->cmsg_len is
+ *	inside range, given by msg->msg_controllen before using
+ *	ancillary object DATA.				--ANK (980731)
+ */
+
+static inline struct cmsghdr * __cmsg_nxthdr(void *__ctl, __kernel_size_t __size,
+					       struct cmsghdr *__cmsg)
+{
+	struct cmsghdr * __ptr;
+
+	__ptr = (struct cmsghdr*)(((unsigned char *) __cmsg) +  CMSG_ALIGN(__cmsg->cmsg_len));
+	if ((unsigned long)((char*)(__ptr+1) - (char *) __ctl) > __size)
+		return (struct cmsghdr *)0;
+
+	return __ptr;
+}
+
+static inline struct cmsghdr * cmsg_nxthdr (struct msghdr *__msg, struct cmsghdr *__cmsg)
+{
+	return __cmsg_nxthdr(__msg->msg_control, __msg->msg_controllen, __cmsg);
+}
+
+static inline size_t msg_data_left(const struct msghdr *msg)
+{
+	return iov_iter_count(&msg->msg_iter);
+}
+
+/* "Socket"-level control message types: */
+
+#define	SCM_RIGHTS	0x01		/* rw: access rights (array of int) */
+#define SCM_CREDENTIALS 0x02		/* rw: struct ucred		*/
+#define SCM_SECURITY	0x03		/* rw: security label		*/
+#define SCM_PIDFD	0x04		/* ro: pidfd (int)		*/
+
+struct ucred {
+	__u32	pid;
+	__u32	uid;
+	__u32	gid;
+};
+
+/* Supported address families. */
+#define AF_UNSPEC	0
+#define AF_UNIX		1	/* Unix domain sockets 		*/
+#define AF_LOCAL	1	/* POSIX name for AF_UNIX	*/
+#define AF_INET		2	/* Internet IP Protocol 	*/
+#define AF_AX25		3	/* Amateur Radio AX.25 		*/
+#define AF_IPX		4	/* Novell IPX 			*/
+#define AF_APPLETALK	5	/* AppleTalk DDP 		*/
+#define AF_NETROM	6	/* Amateur Radio NET/ROM 	*/
+#define AF_BRIDGE	7	/* Multiprotocol bridge 	*/
+#define AF_ATMPVC	8	/* ATM PVCs			*/
+#define AF_X25		9	/* Reserved for X.25 project 	*/
+#define AF_INET6	10	/* IP version 6			*/
+#define AF_ROSE		11	/* Amateur Radio X.25 PLP	*/
+#define AF_DECnet	12	/* Reserved for DECnet project	*/
+#define AF_NETBEUI	13	/* Reserved for 802.2LLC project*/
+#define AF_SECURITY	14	/* Security callback pseudo AF */
+#define AF_KEY		15      /* PF_KEY key management API */
+#define AF_NETLINK	16
+#define AF_ROUTE	AF_NETLINK /* Alias to emulate 4.4BSD */
+#define AF_PACKET	17	/* Packet family		*/
+#define AF_ASH		18	/* Ash				*/
+#define AF_ECONET	19	/* Acorn Econet			*/
+#define AF_ATMSVC	20	/* ATM SVCs			*/
+#define AF_RDS		21	/* RDS sockets 			*/
+#define AF_SNA		22	/* Linux SNA Project (nutters!) */
+#define AF_IRDA		23	/* IRDA sockets			*/
+#define AF_PPPOX	24	/* PPPoX sockets		*/
+#define AF_WANPIPE	25	/* Wanpipe API Sockets */
+#define AF_LLC		26	/* Linux LLC			*/
+#define AF_IB		27	/* Native InfiniBand address	*/
+#define AF_MPLS		28	/* MPLS */
+#define AF_CAN		29	/* Controller Area Network      */
+#define AF_TIPC		30	/* TIPC sockets			*/
+#define AF_BLUETOOTH	31	/* Bluetooth sockets 		*/
+#define AF_IUCV		32	/* IUCV sockets			*/
+#define AF_RXRPC	33	/* RxRPC sockets 		*/
+#define AF_ISDN		34	/* mISDN sockets 		*/
+#define AF_PHONET	35	/* Phonet sockets		*/
+#define AF_IEEE802154	36	/* IEEE802154 sockets		*/
+#define AF_CAIF		37	/* CAIF sockets			*/
+#define AF_ALG		38	/* Algorithm sockets		*/
+#define AF_NFC		39	/* NFC sockets			*/
+#define AF_VSOCK	40	/* vSockets			*/
+#define AF_KCM		41	/* Kernel Connection Multiplexor*/
+#define AF_QIPCRTR	42	/* Qualcomm IPC Router          */
+#define AF_SMC		43	/* smc sockets: reserve number for
+				 * PF_SMC protocol family that
+				 * reuses AF_INET address family
+				 */
+#define AF_XDP		44	/* XDP sockets			*/
+#define AF_MCTP		45	/* Management component
+				 * transport protocol
+				 */
+
+#define AF_MAX		46	/* For now.. */
+
+/* Protocol families, same as address families. */
+#define PF_UNSPEC	AF_UNSPEC
+#define PF_UNIX		AF_UNIX
+#define PF_LOCAL	AF_LOCAL
+#define PF_INET		AF_INET
+#define PF_AX25		AF_AX25
+#define PF_IPX		AF_IPX
+#define PF_APPLETALK	AF_APPLETALK
+#define	PF_NETROM	AF_NETROM
+#define PF_BRIDGE	AF_BRIDGE
+#define PF_ATMPVC	AF_ATMPVC
+#define PF_X25		AF_X25
+#define PF_INET6	AF_INET6
+#define PF_ROSE		AF_ROSE
+#define PF_DECnet	AF_DECnet
+#define PF_NETBEUI	AF_NETBEUI
+#define PF_SECURITY	AF_SECURITY
+#define PF_KEY		AF_KEY
+#define PF_NETLINK	AF_NETLINK
+#define PF_ROUTE	AF_ROUTE
+#define PF_PACKET	AF_PACKET
+#define PF_ASH		AF_ASH
+#define PF_ECONET	AF_ECONET
+#define PF_ATMSVC	AF_ATMSVC
+#define PF_RDS		AF_RDS
+#define PF_SNA		AF_SNA
+#define PF_IRDA		AF_IRDA
+#define PF_PPPOX	AF_PPPOX
+#define PF_WANPIPE	AF_WANPIPE
+#define PF_LLC		AF_LLC
+#define PF_IB		AF_IB
+#define PF_MPLS		AF_MPLS
+#define PF_CAN		AF_CAN
+#define PF_TIPC		AF_TIPC
+#define PF_BLUETOOTH	AF_BLUETOOTH
+#define PF_IUCV		AF_IUCV
+#define PF_RXRPC	AF_RXRPC
+#define PF_ISDN		AF_ISDN
+#define PF_PHONET	AF_PHONET
+#define PF_IEEE802154	AF_IEEE802154
+#define PF_CAIF		AF_CAIF
+#define PF_ALG		AF_ALG
+#define PF_NFC		AF_NFC
+#define PF_VSOCK	AF_VSOCK
+#define PF_KCM		AF_KCM
+#define PF_QIPCRTR	AF_QIPCRTR
+#define PF_SMC		AF_SMC
+#define PF_XDP		AF_XDP
+#define PF_MCTP		AF_MCTP
+#define PF_MAX		AF_MAX
+
+/* Maximum queue length specifiable by listen.  */
+#define SOMAXCONN	4096
+
+/* Flags we can use with send/ and recv.
+   Added those for 1003.1g not all are supported yet
+ */
+
+#define MSG_OOB		1
+#define MSG_PEEK	2
+#define MSG_DONTROUTE	4
+#define MSG_TRYHARD     4       /* Synonym for MSG_DONTROUTE for DECnet */
+#define MSG_CTRUNC	8
+#define MSG_PROBE	0x10	/* Do not send. Only probe path f.e. for MTU */
+#define MSG_TRUNC	0x20
+#define MSG_DONTWAIT	0x40	/* Nonblocking io		 */
+#define MSG_EOR         0x80	/* End of record */
+#define MSG_WAITALL	0x100	/* Wait for a full request */
+#define MSG_FIN         0x200
+#define MSG_SYN		0x400
+#define MSG_CONFIRM	0x800	/* Confirm path validity */
+#define MSG_RST		0x1000
+#define MSG_ERRQUEUE	0x2000	/* Fetch message from error queue */
+#define MSG_NOSIGNAL	0x4000	/* Do not generate SIGPIPE */
+#define MSG_MORE	0x8000	/* Sender will send more */
+#define MSG_WAITFORONE	0x10000	/* recvmmsg(): block until 1+ packets avail */
+#define MSG_SENDPAGE_NOPOLICY 0x10000 /* sendpage() internal : do no apply policy */
+#define MSG_BATCH	0x40000 /* sendmmsg(): more messages coming */
+#define MSG_EOF         MSG_FIN
+#define MSG_NO_SHARED_FRAGS 0x80000 /* sendpage() internal : page frags are not shared */
+#define MSG_SENDPAGE_DECRYPTED	0x100000 /* sendpage() internal : page may carry
+					  * plain text and require encryption
+					  */
+
+#define MSG_SOCK_DEVMEM 0x2000000	/* Receive devmem skbs as cmsg */
+#define MSG_ZEROCOPY	0x4000000	/* Use user data in kernel path */
+#define MSG_SPLICE_PAGES 0x8000000	/* Splice the pages from the iterator in sendmsg() */
+#define MSG_FASTOPEN	0x20000000	/* Send data in TCP SYN */
+#define MSG_CMSG_CLOEXEC 0x40000000	/* Set close_on_exec for file
+					   descriptor received through
+					   SCM_RIGHTS */
+#if defined(CONFIG_COMPAT)
+#define MSG_CMSG_COMPAT	0x80000000	/* This message needs 32 bit fixups */
+#else
+#define MSG_CMSG_COMPAT	0		/* We never have 32 bit fixups */
+#endif
+
+/* Flags to be cleared on entry by sendmsg and sendmmsg syscalls */
+#define MSG_INTERNAL_SENDMSG_FLAGS \
+	(MSG_SPLICE_PAGES | MSG_SENDPAGE_NOPOLICY | MSG_SENDPAGE_DECRYPTED | MSG_NO_SHARED_FRAGS)
+
+/* Setsockoptions(2) level. Thanks to BSD these must match IPPROTO_xxx */
+#define SOL_IP		0
+/* #define SOL_ICMP	1	No-no-no! Due to Linux :-) we cannot use SOL_ICMP=1 */
+#define SOL_TCP		6
+#define SOL_UDP		17
+#define SOL_IPV6	41
+#define SOL_ICMPV6	58
+#define SOL_SCTP	132
+#define SOL_UDPLITE	136     /* UDP-Lite (RFC 3828) */
+#define SOL_RAW		255
+#define SOL_IPX		256
+#define SOL_AX25	257
+#define SOL_ATALK	258
+#define SOL_NETROM	259
+#define SOL_ROSE	260
+#define SOL_DECNET	261
+#define	SOL_X25		262
+#define SOL_PACKET	263
+#define SOL_ATM		264	/* ATM layer (cell level) */
+#define SOL_AAL		265	/* ATM Adaption Layer (packet level) */
+#define SOL_IRDA        266
+#define SOL_NETBEUI	267
+#define SOL_LLC		268
+#define SOL_DCCP	269
+#define SOL_NETLINK	270
+#define SOL_TIPC	271
+#define SOL_RXRPC	272
+#define SOL_PPPOL2TP	273
+#define SOL_BLUETOOTH	274
+#define SOL_PNPIPE	275
+#define SOL_RDS		276
+#define SOL_IUCV	277
+#define SOL_CAIF	278
+#define SOL_ALG		279
+#define SOL_NFC		280
+#define SOL_KCM		281
+#define SOL_TLS		282
+#define SOL_XDP		283
+#define SOL_MPTCP	284
+#define SOL_MCTP	285
+#define SOL_SMC		286
+#define SOL_VSOCK	287
+
+/* IPX options */
+#define IPX_TYPE	1
+
+extern int move_addr_to_kernel(void __user *uaddr, int ulen, struct sockaddr_storage *kaddr);
+extern int put_cmsg(struct msghdr*, int level, int type, int len, void *data);
+extern int put_cmsg_notrunc(struct msghdr *msg, int level, int type, int len,
+			    void *data);
+
+struct timespec64;
+struct __kernel_timespec;
+struct old_timespec32;
+
+struct scm_timestamping_internal {
+	ktime_t ts[3];
+};
+
+extern void put_cmsg_scm_timestamping64(struct msghdr *msg, struct scm_timestamping_internal *tss);
+extern void put_cmsg_scm_timestamping(struct msghdr *msg, struct scm_timestamping_internal *tss);
+
+/* The __sys_...msg variants allow MSG_CMSG_COMPAT iff
+ * forbid_cmsg_compat==false
+ */
+extern long __sys_recvmsg(int fd, struct user_msghdr __user *msg,
+			  unsigned int flags, bool forbid_cmsg_compat);
+extern long __sys_sendmsg(int fd, struct user_msghdr __user *msg,
+			  unsigned int flags, bool forbid_cmsg_compat);
+extern int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg,
+			  unsigned int vlen, unsigned int flags,
+			  struct __kernel_timespec __user *timeout,
+			  struct old_timespec32 __user *timeout32);
+extern int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg,
+			  unsigned int vlen, unsigned int flags,
+			  bool forbid_cmsg_compat);
+extern long __sys_sendmsg_sock(struct socket *sock, struct msghdr *msg,
+			       unsigned int flags);
+extern long __sys_recvmsg_sock(struct socket *sock, struct msghdr *msg,
+			       struct user_msghdr __user *umsg,
+			       struct sockaddr __user *uaddr,
+			       unsigned int flags);
+extern int __copy_msghdr(struct msghdr *kmsg,
+			 struct user_msghdr *umsg,
+			 struct sockaddr __user **save_addr);
+
+/* helpers which do the actual work for syscalls */
+extern int __sys_recvfrom(int fd, void __user *ubuf, size_t size,
+			  unsigned int flags, struct sockaddr __user *addr,
+			  int __user *addr_len);
+extern int __sys_sendto(int fd, void __user *buff, size_t len,
+			unsigned int flags, struct sockaddr __user *addr,
+			int addr_len);
+extern struct file *do_accept(struct file *file, struct proto_accept_arg *arg,
+			      struct sockaddr __user *upeer_sockaddr,
+			      int __user *upeer_addrlen, int flags);
+extern int __sys_accept4(int fd, struct sockaddr __user *upeer_sockaddr,
+			 int __user *upeer_addrlen, int flags);
+extern int __sys_socket(int family, int type, int protocol);
+extern struct file *__sys_socket_file(int family, int type, int protocol);
+extern int __sys_bind(int fd, struct sockaddr __user *umyaddr, int addrlen);
+extern int __sys_bind_socket(struct socket *sock, struct sockaddr_storage *address,
+			     int addrlen);
+extern int __sys_connect_file(struct file *file, struct sockaddr_storage *addr,
+			      int addrlen, int file_flags);
+extern int __sys_connect(int fd, struct sockaddr __user *uservaddr,
+			 int addrlen);
+extern int __sys_listen(int fd, int backlog);
+extern int __sys_listen_socket(struct socket *sock, int backlog);
+extern int do_getsockname(struct socket *sock, int peer,
+			  struct sockaddr __user *usockaddr, int __user *usockaddr_len);
+extern int __sys_getsockname(int fd, struct sockaddr __user *usockaddr,
+			     int __user *usockaddr_len, int peer);
+extern int __sys_socketpair(int family, int type, int protocol,
+			    int __user *usockvec);
+extern int __sys_shutdown_sock(struct socket *sock, int how);
+extern int __sys_shutdown(int fd, int how);
+#endif /* _LINUX_SOCKET_H */
diff --git a/tools/perf/trace/beauty/include/uapi/drm/drm.h b/tools/perf/trace/beauty/include/uapi/drm/drm.h
new file mode 100644
index 000000000..bc7ef7684
--- /dev/null
+++ b/tools/perf/trace/beauty/include/uapi/drm/drm.h
@@ -0,0 +1,1480 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Header for the Direct Rendering Manager
+ *
+ * Author: Rickard E. (Rik) Faith <faith@valinux.com>
+ *
+ * Acknowledgments:
+ * Dec 1999, Richard Henderson <rth@twiddle.net>, move to generic cmpxchg.
+ */
+
+/*
+ * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
+ * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
+ * All rights reserved.
+ */
+
+#ifndef _DRM_H_
+#define _DRM_H_
+
+#if defined(__KERNEL__)
+
+#include <linux/types.h>
+#include <asm/ioctl.h>
+typedef unsigned int drm_handle_t;
+
+#elif defined(__linux__)
+
+#include <linux/types.h>
+#include <asm/ioctl.h>
+typedef unsigned int drm_handle_t;
+
+#else /* One of the BSDs */
+
+#include <stdint.h>
+#include <sys/ioccom.h>
+#include <sys/types.h>
+typedef int8_t   __s8;
+typedef uint8_t  __u8;
+typedef int16_t  __s16;
+typedef uint16_t __u16;
+typedef int32_t  __s32;
+typedef uint32_t __u32;
+typedef int64_t  __s64;
+typedef uint64_t __u64;
+typedef size_t   __kernel_size_t;
+typedef unsigned long drm_handle_t;
+
+#endif
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+#define DRM_NAME	"drm"	  /**< Name in kernel, /dev, and /proc */
+#define DRM_MIN_ORDER	5	  /**< At least 2^5 bytes = 32 bytes */
+#define DRM_MAX_ORDER	22	  /**< Up to 2^22 bytes = 4MB */
+#define DRM_RAM_PERCENT 10	  /**< How much system ram can we lock? */
+
+#define _DRM_LOCK_HELD	0x80000000U /**< Hardware lock is held */
+#define _DRM_LOCK_CONT	0x40000000U /**< Hardware lock is contended */
+#define _DRM_LOCK_IS_HELD(lock)	   ((lock) & _DRM_LOCK_HELD)
+#define _DRM_LOCK_IS_CONT(lock)	   ((lock) & _DRM_LOCK_CONT)
+#define _DRM_LOCKING_CONTEXT(lock) ((lock) & ~(_DRM_LOCK_HELD|_DRM_LOCK_CONT))
+
+typedef unsigned int drm_context_t;
+typedef unsigned int drm_drawable_t;
+typedef unsigned int drm_magic_t;
+
+/*
+ * Cliprect.
+ *
+ * \warning: If you change this structure, make sure you change
+ * XF86DRIClipRectRec in the server as well
+ *
+ * \note KW: Actually it's illegal to change either for
+ * backwards-compatibility reasons.
+ */
+struct drm_clip_rect {
+	unsigned short x1;
+	unsigned short y1;
+	unsigned short x2;
+	unsigned short y2;
+};
+
+/*
+ * Drawable information.
+ */
+struct drm_drawable_info {
+	unsigned int num_rects;
+	struct drm_clip_rect *rects;
+};
+
+/*
+ * Texture region,
+ */
+struct drm_tex_region {
+	unsigned char next;
+	unsigned char prev;
+	unsigned char in_use;
+	unsigned char padding;
+	unsigned int age;
+};
+
+/*
+ * Hardware lock.
+ *
+ * The lock structure is a simple cache-line aligned integer.  To avoid
+ * processor bus contention on a multiprocessor system, there should not be any
+ * other data stored in the same cache line.
+ */
+struct drm_hw_lock {
+	__volatile__ unsigned int lock;		/**< lock variable */
+	char padding[60];			/**< Pad to cache line */
+};
+
+/*
+ * DRM_IOCTL_VERSION ioctl argument type.
+ *
+ * \sa drmGetVersion().
+ */
+struct drm_version {
+	int version_major;	  /**< Major version */
+	int version_minor;	  /**< Minor version */
+	int version_patchlevel;	  /**< Patch level */
+	__kernel_size_t name_len;	  /**< Length of name buffer */
+	char __user *name;	  /**< Name of driver */
+	__kernel_size_t date_len;	  /**< Length of date buffer */
+	char __user *date;	  /**< User-space buffer to hold date */
+	__kernel_size_t desc_len;	  /**< Length of desc buffer */
+	char __user *desc;	  /**< User-space buffer to hold desc */
+};
+
+/*
+ * DRM_IOCTL_GET_UNIQUE ioctl argument type.
+ *
+ * \sa drmGetBusid() and drmSetBusId().
+ */
+struct drm_unique {
+	__kernel_size_t unique_len;	  /**< Length of unique */
+	char __user *unique;	  /**< Unique name for driver instantiation */
+};
+
+struct drm_list {
+	int count;		  /**< Length of user-space structures */
+	struct drm_version __user *version;
+};
+
+struct drm_block {
+	int unused;
+};
+
+/*
+ * DRM_IOCTL_CONTROL ioctl argument type.
+ *
+ * \sa drmCtlInstHandler() and drmCtlUninstHandler().
+ */
+struct drm_control {
+	enum {
+		DRM_ADD_COMMAND,
+		DRM_RM_COMMAND,
+		DRM_INST_HANDLER,
+		DRM_UNINST_HANDLER
+	} func;
+	int irq;
+};
+
+/*
+ * Type of memory to map.
+ */
+enum drm_map_type {
+	_DRM_FRAME_BUFFER = 0,	  /**< WC (no caching), no core dump */
+	_DRM_REGISTERS = 1,	  /**< no caching, no core dump */
+	_DRM_SHM = 2,		  /**< shared, cached */
+	_DRM_AGP = 3,		  /**< AGP/GART */
+	_DRM_SCATTER_GATHER = 4,  /**< Scatter/gather memory for PCI DMA */
+	_DRM_CONSISTENT = 5	  /**< Consistent memory for PCI DMA */
+};
+
+/*
+ * Memory mapping flags.
+ */
+enum drm_map_flags {
+	_DRM_RESTRICTED = 0x01,	     /**< Cannot be mapped to user-virtual */
+	_DRM_READ_ONLY = 0x02,
+	_DRM_LOCKED = 0x04,	     /**< shared, cached, locked */
+	_DRM_KERNEL = 0x08,	     /**< kernel requires access */
+	_DRM_WRITE_COMBINING = 0x10, /**< use write-combining if available */
+	_DRM_CONTAINS_LOCK = 0x20,   /**< SHM page that contains lock */
+	_DRM_REMOVABLE = 0x40,	     /**< Removable mapping */
+	_DRM_DRIVER = 0x80	     /**< Managed by driver */
+};
+
+struct drm_ctx_priv_map {
+	unsigned int ctx_id;	 /**< Context requesting private mapping */
+	void *handle;		 /**< Handle of map */
+};
+
+/*
+ * DRM_IOCTL_GET_MAP, DRM_IOCTL_ADD_MAP and DRM_IOCTL_RM_MAP ioctls
+ * argument type.
+ *
+ * \sa drmAddMap().
+ */
+struct drm_map {
+	unsigned long offset;	 /**< Requested physical address (0 for SAREA)*/
+	unsigned long size;	 /**< Requested physical size (bytes) */
+	enum drm_map_type type;	 /**< Type of memory to map */
+	enum drm_map_flags flags;	 /**< Flags */
+	void *handle;		 /**< User-space: "Handle" to pass to mmap() */
+				 /**< Kernel-space: kernel-virtual address */
+	int mtrr;		 /**< MTRR slot used */
+	/*   Private data */
+};
+
+/*
+ * DRM_IOCTL_GET_CLIENT ioctl argument type.
+ */
+struct drm_client {
+	int idx;		/**< Which client desired? */
+	int auth;		/**< Is client authenticated? */
+	unsigned long pid;	/**< Process ID */
+	unsigned long uid;	/**< User ID */
+	unsigned long magic;	/**< Magic */
+	unsigned long iocs;	/**< Ioctl count */
+};
+
+enum drm_stat_type {
+	_DRM_STAT_LOCK,
+	_DRM_STAT_OPENS,
+	_DRM_STAT_CLOSES,
+	_DRM_STAT_IOCTLS,
+	_DRM_STAT_LOCKS,
+	_DRM_STAT_UNLOCKS,
+	_DRM_STAT_VALUE,	/**< Generic value */
+	_DRM_STAT_BYTE,		/**< Generic byte counter (1024bytes/K) */
+	_DRM_STAT_COUNT,	/**< Generic non-byte counter (1000/k) */
+
+	_DRM_STAT_IRQ,		/**< IRQ */
+	_DRM_STAT_PRIMARY,	/**< Primary DMA bytes */
+	_DRM_STAT_SECONDARY,	/**< Secondary DMA bytes */
+	_DRM_STAT_DMA,		/**< DMA */
+	_DRM_STAT_SPECIAL,	/**< Special DMA (e.g., priority or polled) */
+	_DRM_STAT_MISSED	/**< Missed DMA opportunity */
+	    /* Add to the *END* of the list */
+};
+
+/*
+ * DRM_IOCTL_GET_STATS ioctl argument type.
+ */
+struct drm_stats {
+	unsigned long count;
+	struct {
+		unsigned long value;
+		enum drm_stat_type type;
+	} data[15];
+};
+
+/*
+ * Hardware locking flags.
+ */
+enum drm_lock_flags {
+	_DRM_LOCK_READY = 0x01,	     /**< Wait until hardware is ready for DMA */
+	_DRM_LOCK_QUIESCENT = 0x02,  /**< Wait until hardware quiescent */
+	_DRM_LOCK_FLUSH = 0x04,	     /**< Flush this context's DMA queue first */
+	_DRM_LOCK_FLUSH_ALL = 0x08,  /**< Flush all DMA queues first */
+	/* These *HALT* flags aren't supported yet
+	   -- they will be used to support the
+	   full-screen DGA-like mode. */
+	_DRM_HALT_ALL_QUEUES = 0x10, /**< Halt all current and future queues */
+	_DRM_HALT_CUR_QUEUES = 0x20  /**< Halt all current queues */
+};
+
+/*
+ * DRM_IOCTL_LOCK, DRM_IOCTL_UNLOCK and DRM_IOCTL_FINISH ioctl argument type.
+ *
+ * \sa drmGetLock() and drmUnlock().
+ */
+struct drm_lock {
+	int context;
+	enum drm_lock_flags flags;
+};
+
+/*
+ * DMA flags
+ *
+ * \warning
+ * These values \e must match xf86drm.h.
+ *
+ * \sa drm_dma.
+ */
+enum drm_dma_flags {
+	/* Flags for DMA buffer dispatch */
+	_DRM_DMA_BLOCK = 0x01,	      /**<
+				       * Block until buffer dispatched.
+				       *
+				       * \note The buffer may not yet have
+				       * been processed by the hardware --
+				       * getting a hardware lock with the
+				       * hardware quiescent will ensure
+				       * that the buffer has been
+				       * processed.
+				       */
+	_DRM_DMA_WHILE_LOCKED = 0x02, /**< Dispatch while lock held */
+	_DRM_DMA_PRIORITY = 0x04,     /**< High priority dispatch */
+
+	/* Flags for DMA buffer request */
+	_DRM_DMA_WAIT = 0x10,	      /**< Wait for free buffers */
+	_DRM_DMA_SMALLER_OK = 0x20,   /**< Smaller-than-requested buffers OK */
+	_DRM_DMA_LARGER_OK = 0x40     /**< Larger-than-requested buffers OK */
+};
+
+/*
+ * DRM_IOCTL_ADD_BUFS and DRM_IOCTL_MARK_BUFS ioctl argument type.
+ *
+ * \sa drmAddBufs().
+ */
+struct drm_buf_desc {
+	int count;		 /**< Number of buffers of this size */
+	int size;		 /**< Size in bytes */
+	int low_mark;		 /**< Low water mark */
+	int high_mark;		 /**< High water mark */
+	enum {
+		_DRM_PAGE_ALIGN = 0x01,	/**< Align on page boundaries for DMA */
+		_DRM_AGP_BUFFER = 0x02,	/**< Buffer is in AGP space */
+		_DRM_SG_BUFFER = 0x04,	/**< Scatter/gather memory buffer */
+		_DRM_FB_BUFFER = 0x08,	/**< Buffer is in frame buffer */
+		_DRM_PCI_BUFFER_RO = 0x10 /**< Map PCI DMA buffer read-only */
+	} flags;
+	unsigned long agp_start; /**<
+				  * Start address of where the AGP buffers are
+				  * in the AGP aperture
+				  */
+};
+
+/*
+ * DRM_IOCTL_INFO_BUFS ioctl argument type.
+ */
+struct drm_buf_info {
+	int count;		/**< Entries in list */
+	struct drm_buf_desc __user *list;
+};
+
+/*
+ * DRM_IOCTL_FREE_BUFS ioctl argument type.
+ */
+struct drm_buf_free {
+	int count;
+	int __user *list;
+};
+
+/*
+ * Buffer information
+ *
+ * \sa drm_buf_map.
+ */
+struct drm_buf_pub {
+	int idx;		       /**< Index into the master buffer list */
+	int total;		       /**< Buffer size */
+	int used;		       /**< Amount of buffer in use (for DMA) */
+	void __user *address;	       /**< Address of buffer */
+};
+
+/*
+ * DRM_IOCTL_MAP_BUFS ioctl argument type.
+ */
+struct drm_buf_map {
+	int count;		/**< Length of the buffer list */
+#ifdef __cplusplus
+	void __user *virt;
+#else
+	void __user *virtual;		/**< Mmap'd area in user-virtual */
+#endif
+	struct drm_buf_pub __user *list;	/**< Buffer information */
+};
+
+/*
+ * DRM_IOCTL_DMA ioctl argument type.
+ *
+ * Indices here refer to the offset into the buffer list in drm_buf_get.
+ *
+ * \sa drmDMA().
+ */
+struct drm_dma {
+	int context;			  /**< Context handle */
+	int send_count;			  /**< Number of buffers to send */
+	int __user *send_indices;	  /**< List of handles to buffers */
+	int __user *send_sizes;		  /**< Lengths of data to send */
+	enum drm_dma_flags flags;	  /**< Flags */
+	int request_count;		  /**< Number of buffers requested */
+	int request_size;		  /**< Desired size for buffers */
+	int __user *request_indices;	  /**< Buffer information */
+	int __user *request_sizes;
+	int granted_count;		  /**< Number of buffers granted */
+};
+
+enum drm_ctx_flags {
+	_DRM_CONTEXT_PRESERVED = 0x01,
+	_DRM_CONTEXT_2DONLY = 0x02
+};
+
+/*
+ * DRM_IOCTL_ADD_CTX ioctl argument type.
+ *
+ * \sa drmCreateContext() and drmDestroyContext().
+ */
+struct drm_ctx {
+	drm_context_t handle;
+	enum drm_ctx_flags flags;
+};
+
+/*
+ * DRM_IOCTL_RES_CTX ioctl argument type.
+ */
+struct drm_ctx_res {
+	int count;
+	struct drm_ctx __user *contexts;
+};
+
+/*
+ * DRM_IOCTL_ADD_DRAW and DRM_IOCTL_RM_DRAW ioctl argument type.
+ */
+struct drm_draw {
+	drm_drawable_t handle;
+};
+
+/*
+ * DRM_IOCTL_UPDATE_DRAW ioctl argument type.
+ */
+typedef enum {
+	DRM_DRAWABLE_CLIPRECTS
+} drm_drawable_info_type_t;
+
+struct drm_update_draw {
+	drm_drawable_t handle;
+	unsigned int type;
+	unsigned int num;
+	unsigned long long data;
+};
+
+/*
+ * DRM_IOCTL_GET_MAGIC and DRM_IOCTL_AUTH_MAGIC ioctl argument type.
+ */
+struct drm_auth {
+	drm_magic_t magic;
+};
+
+/*
+ * DRM_IOCTL_IRQ_BUSID ioctl argument type.
+ *
+ * \sa drmGetInterruptFromBusID().
+ */
+struct drm_irq_busid {
+	int irq;	/**< IRQ number */
+	int busnum;	/**< bus number */
+	int devnum;	/**< device number */
+	int funcnum;	/**< function number */
+};
+
+enum drm_vblank_seq_type {
+	_DRM_VBLANK_ABSOLUTE = 0x0,	/**< Wait for specific vblank sequence number */
+	_DRM_VBLANK_RELATIVE = 0x1,	/**< Wait for given number of vblanks */
+	/* bits 1-6 are reserved for high crtcs */
+	_DRM_VBLANK_HIGH_CRTC_MASK = 0x0000003e,
+	_DRM_VBLANK_EVENT = 0x4000000,   /**< Send event instead of blocking */
+	_DRM_VBLANK_FLIP = 0x8000000,   /**< Scheduled buffer swap should flip */
+	_DRM_VBLANK_NEXTONMISS = 0x10000000,	/**< If missed, wait for next vblank */
+	_DRM_VBLANK_SECONDARY = 0x20000000,	/**< Secondary display controller */
+	_DRM_VBLANK_SIGNAL = 0x40000000	/**< Send signal instead of blocking, unsupported */
+};
+#define _DRM_VBLANK_HIGH_CRTC_SHIFT 1
+
+#define _DRM_VBLANK_TYPES_MASK (_DRM_VBLANK_ABSOLUTE | _DRM_VBLANK_RELATIVE)
+#define _DRM_VBLANK_FLAGS_MASK (_DRM_VBLANK_EVENT | _DRM_VBLANK_SIGNAL | \
+				_DRM_VBLANK_SECONDARY | _DRM_VBLANK_NEXTONMISS)
+
+struct drm_wait_vblank_request {
+	enum drm_vblank_seq_type type;
+	unsigned int sequence;
+	unsigned long signal;
+};
+
+struct drm_wait_vblank_reply {
+	enum drm_vblank_seq_type type;
+	unsigned int sequence;
+	long tval_sec;
+	long tval_usec;
+};
+
+/*
+ * DRM_IOCTL_WAIT_VBLANK ioctl argument type.
+ *
+ * \sa drmWaitVBlank().
+ */
+union drm_wait_vblank {
+	struct drm_wait_vblank_request request;
+	struct drm_wait_vblank_reply reply;
+};
+
+#define _DRM_PRE_MODESET 1
+#define _DRM_POST_MODESET 2
+
+/*
+ * DRM_IOCTL_MODESET_CTL ioctl argument type
+ *
+ * \sa drmModesetCtl().
+ */
+struct drm_modeset_ctl {
+	__u32 crtc;
+	__u32 cmd;
+};
+
+/*
+ * DRM_IOCTL_AGP_ENABLE ioctl argument type.
+ *
+ * \sa drmAgpEnable().
+ */
+struct drm_agp_mode {
+	unsigned long mode;	/**< AGP mode */
+};
+
+/*
+ * DRM_IOCTL_AGP_ALLOC and DRM_IOCTL_AGP_FREE ioctls argument type.
+ *
+ * \sa drmAgpAlloc() and drmAgpFree().
+ */
+struct drm_agp_buffer {
+	unsigned long size;	/**< In bytes -- will round to page boundary */
+	unsigned long handle;	/**< Used for binding / unbinding */
+	unsigned long type;	/**< Type of memory to allocate */
+	unsigned long physical;	/**< Physical used by i810 */
+};
+
+/*
+ * DRM_IOCTL_AGP_BIND and DRM_IOCTL_AGP_UNBIND ioctls argument type.
+ *
+ * \sa drmAgpBind() and drmAgpUnbind().
+ */
+struct drm_agp_binding {
+	unsigned long handle;	/**< From drm_agp_buffer */
+	unsigned long offset;	/**< In bytes -- will round to page boundary */
+};
+
+/*
+ * DRM_IOCTL_AGP_INFO ioctl argument type.
+ *
+ * \sa drmAgpVersionMajor(), drmAgpVersionMinor(), drmAgpGetMode(),
+ * drmAgpBase(), drmAgpSize(), drmAgpMemoryUsed(), drmAgpMemoryAvail(),
+ * drmAgpVendorId() and drmAgpDeviceId().
+ */
+struct drm_agp_info {
+	int agp_version_major;
+	int agp_version_minor;
+	unsigned long mode;
+	unsigned long aperture_base;	/* physical address */
+	unsigned long aperture_size;	/* bytes */
+	unsigned long memory_allowed;	/* bytes */
+	unsigned long memory_used;
+
+	/* PCI information */
+	unsigned short id_vendor;
+	unsigned short id_device;
+};
+
+/*
+ * DRM_IOCTL_SG_ALLOC ioctl argument type.
+ */
+struct drm_scatter_gather {
+	unsigned long size;	/**< In bytes -- will round to page boundary */
+	unsigned long handle;	/**< Used for mapping / unmapping */
+};
+
+/*
+ * DRM_IOCTL_SET_VERSION ioctl argument type.
+ */
+struct drm_set_version {
+	int drm_di_major;
+	int drm_di_minor;
+	int drm_dd_major;
+	int drm_dd_minor;
+};
+
+/**
+ * struct drm_gem_close - Argument for &DRM_IOCTL_GEM_CLOSE ioctl.
+ * @handle: Handle of the object to be closed.
+ * @pad: Padding.
+ *
+ * Releases the handle to an mm object.
+ */
+struct drm_gem_close {
+	__u32 handle;
+	__u32 pad;
+};
+
+/**
+ * struct drm_gem_flink - Argument for &DRM_IOCTL_GEM_FLINK ioctl.
+ * @handle: Handle for the object being named.
+ * @name: Returned global name.
+ *
+ * Create a global name for an object, returning the name.
+ *
+ * Note that the name does not hold a reference; when the object
+ * is freed, the name goes away.
+ */
+struct drm_gem_flink {
+	__u32 handle;
+	__u32 name;
+};
+
+/**
+ * struct drm_gem_open - Argument for &DRM_IOCTL_GEM_OPEN ioctl.
+ * @name: Name of object being opened.
+ * @handle: Returned handle for the object.
+ * @size: Returned size of the object
+ *
+ * Open an object using the global name, returning a handle and the size.
+ *
+ * This handle (of course) holds a reference to the object, so the object
+ * will not go away until the handle is deleted.
+ */
+struct drm_gem_open {
+	__u32 name;
+	__u32 handle;
+	__u64 size;
+};
+
+/**
+ * struct drm_gem_change_handle - Argument for &DRM_IOCTL_GEM_CHANGE_HANDLE ioctl.
+ * @handle: The handle of a gem object.
+ * @new_handle: An available gem handle.
+ *
+ * This ioctl changes the handle of a GEM object to the specified one.
+ * The new handle must be unused. On success the old handle is closed
+ * and all further IOCTL should refer to the new handle only.
+ * Calls to DRM_IOCTL_PRIME_FD_TO_HANDLE will return the new handle.
+ */
+struct drm_gem_change_handle {
+	__u32 handle;
+	__u32 new_handle;
+};
+
+/**
+ * DRM_CAP_DUMB_BUFFER
+ *
+ * If set to 1, the driver supports creating dumb buffers via the
+ * &DRM_IOCTL_MODE_CREATE_DUMB ioctl.
+ */
+#define DRM_CAP_DUMB_BUFFER		0x1
+/**
+ * DRM_CAP_VBLANK_HIGH_CRTC
+ *
+ * If set to 1, the kernel supports specifying a :ref:`CRTC index<crtc_index>`
+ * in the high bits of &drm_wait_vblank_request.type.
+ *
+ * Starting kernel version 2.6.39, this capability is always set to 1.
+ */
+#define DRM_CAP_VBLANK_HIGH_CRTC	0x2
+/**
+ * DRM_CAP_DUMB_PREFERRED_DEPTH
+ *
+ * The preferred bit depth for dumb buffers.
+ *
+ * The bit depth is the number of bits used to indicate the color of a single
+ * pixel excluding any padding. This is different from the number of bits per
+ * pixel. For instance, XRGB8888 has a bit depth of 24 but has 32 bits per
+ * pixel.
+ *
+ * Note that this preference only applies to dumb buffers, it's irrelevant for
+ * other types of buffers.
+ */
+#define DRM_CAP_DUMB_PREFERRED_DEPTH	0x3
+/**
+ * DRM_CAP_DUMB_PREFER_SHADOW
+ *
+ * If set to 1, the driver prefers userspace to render to a shadow buffer
+ * instead of directly rendering to a dumb buffer. For best speed, userspace
+ * should do streaming ordered memory copies into the dumb buffer and never
+ * read from it.
+ *
+ * Note that this preference only applies to dumb buffers, it's irrelevant for
+ * other types of buffers.
+ */
+#define DRM_CAP_DUMB_PREFER_SHADOW	0x4
+/**
+ * DRM_CAP_PRIME
+ *
+ * Bitfield of supported PRIME sharing capabilities. See &DRM_PRIME_CAP_IMPORT
+ * and &DRM_PRIME_CAP_EXPORT.
+ *
+ * Starting from kernel version 6.6, both &DRM_PRIME_CAP_IMPORT and
+ * &DRM_PRIME_CAP_EXPORT are always advertised.
+ *
+ * PRIME buffers are exposed as dma-buf file descriptors.
+ * See :ref:`prime_buffer_sharing`.
+ */
+#define DRM_CAP_PRIME			0x5
+/**
+ * DRM_PRIME_CAP_IMPORT
+ *
+ * If this bit is set in &DRM_CAP_PRIME, the driver supports importing PRIME
+ * buffers via the &DRM_IOCTL_PRIME_FD_TO_HANDLE ioctl.
+ *
+ * Starting from kernel version 6.6, this bit is always set in &DRM_CAP_PRIME.
+ */
+#define  DRM_PRIME_CAP_IMPORT		0x1
+/**
+ * DRM_PRIME_CAP_EXPORT
+ *
+ * If this bit is set in &DRM_CAP_PRIME, the driver supports exporting PRIME
+ * buffers via the &DRM_IOCTL_PRIME_HANDLE_TO_FD ioctl.
+ *
+ * Starting from kernel version 6.6, this bit is always set in &DRM_CAP_PRIME.
+ */
+#define  DRM_PRIME_CAP_EXPORT		0x2
+/**
+ * DRM_CAP_TIMESTAMP_MONOTONIC
+ *
+ * If set to 0, the kernel will report timestamps with ``CLOCK_REALTIME`` in
+ * struct drm_event_vblank. If set to 1, the kernel will report timestamps with
+ * ``CLOCK_MONOTONIC``. See ``clock_gettime(2)`` for the definition of these
+ * clocks.
+ *
+ * Starting from kernel version 2.6.39, the default value for this capability
+ * is 1. Starting kernel version 4.15, this capability is always set to 1.
+ */
+#define DRM_CAP_TIMESTAMP_MONOTONIC	0x6
+/**
+ * DRM_CAP_ASYNC_PAGE_FLIP
+ *
+ * If set to 1, the driver supports &DRM_MODE_PAGE_FLIP_ASYNC for legacy
+ * page-flips.
+ */
+#define DRM_CAP_ASYNC_PAGE_FLIP		0x7
+/**
+ * DRM_CAP_CURSOR_WIDTH
+ *
+ * The ``CURSOR_WIDTH`` and ``CURSOR_HEIGHT`` capabilities return a valid
+ * width x height combination for the hardware cursor. The intention is that a
+ * hardware agnostic userspace can query a cursor plane size to use.
+ *
+ * Note that the cross-driver contract is to merely return a valid size;
+ * drivers are free to attach another meaning on top, eg. i915 returns the
+ * maximum plane size.
+ */
+#define DRM_CAP_CURSOR_WIDTH		0x8
+/**
+ * DRM_CAP_CURSOR_HEIGHT
+ *
+ * See &DRM_CAP_CURSOR_WIDTH.
+ */
+#define DRM_CAP_CURSOR_HEIGHT		0x9
+/**
+ * DRM_CAP_ADDFB2_MODIFIERS
+ *
+ * If set to 1, the driver supports supplying modifiers in the
+ * &DRM_IOCTL_MODE_ADDFB2 ioctl.
+ */
+#define DRM_CAP_ADDFB2_MODIFIERS	0x10
+/**
+ * DRM_CAP_PAGE_FLIP_TARGET
+ *
+ * If set to 1, the driver supports the &DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE and
+ * &DRM_MODE_PAGE_FLIP_TARGET_RELATIVE flags in
+ * &drm_mode_crtc_page_flip_target.flags for the &DRM_IOCTL_MODE_PAGE_FLIP
+ * ioctl.
+ */
+#define DRM_CAP_PAGE_FLIP_TARGET	0x11
+/**
+ * DRM_CAP_CRTC_IN_VBLANK_EVENT
+ *
+ * If set to 1, the kernel supports reporting the CRTC ID in
+ * &drm_event_vblank.crtc_id for the &DRM_EVENT_VBLANK and
+ * &DRM_EVENT_FLIP_COMPLETE events.
+ *
+ * Starting kernel version 4.12, this capability is always set to 1.
+ */
+#define DRM_CAP_CRTC_IN_VBLANK_EVENT	0x12
+/**
+ * DRM_CAP_SYNCOBJ
+ *
+ * If set to 1, the driver supports sync objects. See :ref:`drm_sync_objects`.
+ */
+#define DRM_CAP_SYNCOBJ		0x13
+/**
+ * DRM_CAP_SYNCOBJ_TIMELINE
+ *
+ * If set to 1, the driver supports timeline operations on sync objects. See
+ * :ref:`drm_sync_objects`.
+ */
+#define DRM_CAP_SYNCOBJ_TIMELINE	0x14
+/**
+ * DRM_CAP_ATOMIC_ASYNC_PAGE_FLIP
+ *
+ * If set to 1, the driver supports &DRM_MODE_PAGE_FLIP_ASYNC for atomic
+ * commits.
+ */
+#define DRM_CAP_ATOMIC_ASYNC_PAGE_FLIP	0x15
+
+/* DRM_IOCTL_GET_CAP ioctl argument type */
+struct drm_get_cap {
+	__u64 capability;
+	__u64 value;
+};
+
+/**
+ * DRM_CLIENT_CAP_STEREO_3D
+ *
+ * If set to 1, the DRM core will expose the stereo 3D capabilities of the
+ * monitor by advertising the supported 3D layouts in the flags of struct
+ * drm_mode_modeinfo. See ``DRM_MODE_FLAG_3D_*``.
+ *
+ * This capability is always supported for all drivers starting from kernel
+ * version 3.13.
+ */
+#define DRM_CLIENT_CAP_STEREO_3D	1
+
+/**
+ * DRM_CLIENT_CAP_UNIVERSAL_PLANES
+ *
+ * If set to 1, the DRM core will expose all planes (overlay, primary, and
+ * cursor) to userspace.
+ *
+ * This capability has been introduced in kernel version 3.15. Starting from
+ * kernel version 3.17, this capability is always supported for all drivers.
+ */
+#define DRM_CLIENT_CAP_UNIVERSAL_PLANES  2
+
+/**
+ * DRM_CLIENT_CAP_ATOMIC
+ *
+ * If set to 1, the DRM core will expose atomic properties to userspace. This
+ * implicitly enables &DRM_CLIENT_CAP_UNIVERSAL_PLANES and
+ * &DRM_CLIENT_CAP_ASPECT_RATIO.
+ *
+ * If the driver doesn't support atomic mode-setting, enabling this capability
+ * will fail with -EOPNOTSUPP.
+ *
+ * This capability has been introduced in kernel version 4.0. Starting from
+ * kernel version 4.2, this capability is always supported for atomic-capable
+ * drivers.
+ */
+#define DRM_CLIENT_CAP_ATOMIC	3
+
+/**
+ * DRM_CLIENT_CAP_ASPECT_RATIO
+ *
+ * If set to 1, the DRM core will provide aspect ratio information in modes.
+ * See ``DRM_MODE_FLAG_PIC_AR_*``.
+ *
+ * This capability is always supported for all drivers starting from kernel
+ * version 4.18.
+ */
+#define DRM_CLIENT_CAP_ASPECT_RATIO    4
+
+/**
+ * DRM_CLIENT_CAP_WRITEBACK_CONNECTORS
+ *
+ * If set to 1, the DRM core will expose special connectors to be used for
+ * writing back to memory the scene setup in the commit. The client must enable
+ * &DRM_CLIENT_CAP_ATOMIC first.
+ *
+ * This capability is always supported for atomic-capable drivers starting from
+ * kernel version 4.19.
+ */
+#define DRM_CLIENT_CAP_WRITEBACK_CONNECTORS	5
+
+/**
+ * DRM_CLIENT_CAP_CURSOR_PLANE_HOTSPOT
+ *
+ * Drivers for para-virtualized hardware (e.g. vmwgfx, qxl, virtio and
+ * virtualbox) have additional restrictions for cursor planes (thus
+ * making cursor planes on those drivers not truly universal,) e.g.
+ * they need cursor planes to act like one would expect from a mouse
+ * cursor and have correctly set hotspot properties.
+ * If this client cap is not set the DRM core will hide cursor plane on
+ * those virtualized drivers because not setting it implies that the
+ * client is not capable of dealing with those extra restictions.
+ * Clients which do set cursor hotspot and treat the cursor plane
+ * like a mouse cursor should set this property.
+ * The client must enable &DRM_CLIENT_CAP_ATOMIC first.
+ *
+ * Setting this property on drivers which do not special case
+ * cursor planes (i.e. non-virtualized drivers) will return
+ * EOPNOTSUPP, which can be used by userspace to gauge
+ * requirements of the hardware/drivers they're running on.
+ *
+ * This capability is always supported for atomic-capable virtualized
+ * drivers starting from kernel version 6.6.
+ */
+#define DRM_CLIENT_CAP_CURSOR_PLANE_HOTSPOT	6
+
+/**
+ * DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
+ *
+ * If set to 1 the DRM core will allow setting the COLOR_PIPELINE
+ * property on a &drm_plane, as well as drm_colorop properties.
+ *
+ * Setting of these plane properties will be rejected when this client
+ * cap is set:
+ * - COLOR_ENCODING
+ * - COLOR_RANGE
+ *
+ * The client must enable &DRM_CLIENT_CAP_ATOMIC first.
+ */
+#define DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE	7
+
+/* DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */
+struct drm_set_client_cap {
+	__u64 capability;
+	__u64 value;
+};
+
+#define DRM_RDWR O_RDWR
+#define DRM_CLOEXEC O_CLOEXEC
+struct drm_prime_handle {
+	__u32 handle;
+
+	/** Flags.. only applicable for handle->fd */
+	__u32 flags;
+
+	/** Returned dmabuf file descriptor */
+	__s32 fd;
+};
+
+struct drm_syncobj_create {
+	__u32 handle;
+#define DRM_SYNCOBJ_CREATE_SIGNALED (1 << 0)
+	__u32 flags;
+};
+
+struct drm_syncobj_destroy {
+	__u32 handle;
+	__u32 pad;
+};
+
+#define DRM_SYNCOBJ_FD_TO_HANDLE_FLAGS_IMPORT_SYNC_FILE (1 << 0)
+#define DRM_SYNCOBJ_FD_TO_HANDLE_FLAGS_TIMELINE         (1 << 1)
+#define DRM_SYNCOBJ_HANDLE_TO_FD_FLAGS_EXPORT_SYNC_FILE (1 << 0)
+#define DRM_SYNCOBJ_HANDLE_TO_FD_FLAGS_TIMELINE         (1 << 1)
+struct drm_syncobj_handle {
+	__u32 handle;
+	__u32 flags;
+
+	__s32 fd;
+	__u32 pad;
+
+	__u64 point;
+};
+
+struct drm_syncobj_transfer {
+	__u32 src_handle;
+	__u32 dst_handle;
+	__u64 src_point;
+	__u64 dst_point;
+	__u32 flags;
+	__u32 pad;
+};
+
+#define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_ALL (1 << 0)
+#define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT (1 << 1)
+#define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE (1 << 2) /* wait for time point to become available */
+#define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_DEADLINE (1 << 3) /* set fence deadline to deadline_nsec */
+struct drm_syncobj_wait {
+	__u64 handles;
+	/* absolute timeout */
+	__s64 timeout_nsec;
+	__u32 count_handles;
+	__u32 flags;
+	__u32 first_signaled; /* only valid when not waiting all */
+	__u32 pad;
+	/**
+	 * @deadline_nsec - fence deadline hint
+	 *
+	 * Deadline hint, in absolute CLOCK_MONOTONIC, to set on backing
+	 * fence(s) if the DRM_SYNCOBJ_WAIT_FLAGS_WAIT_DEADLINE flag is
+	 * set.
+	 */
+	__u64 deadline_nsec;
+};
+
+struct drm_syncobj_timeline_wait {
+	__u64 handles;
+	/* wait on specific timeline point for every handles*/
+	__u64 points;
+	/* absolute timeout */
+	__s64 timeout_nsec;
+	__u32 count_handles;
+	__u32 flags;
+	__u32 first_signaled; /* only valid when not waiting all */
+	__u32 pad;
+	/**
+	 * @deadline_nsec - fence deadline hint
+	 *
+	 * Deadline hint, in absolute CLOCK_MONOTONIC, to set on backing
+	 * fence(s) if the DRM_SYNCOBJ_WAIT_FLAGS_WAIT_DEADLINE flag is
+	 * set.
+	 */
+	__u64 deadline_nsec;
+};
+
+/**
+ * struct drm_syncobj_eventfd
+ * @handle: syncobj handle.
+ * @flags: Zero to wait for the point to be signalled, or
+ *         &DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE to wait for a fence to be
+ *         available for the point.
+ * @point: syncobj timeline point (set to zero for binary syncobjs).
+ * @fd: Existing eventfd to sent events to.
+ * @pad: Must be zero.
+ *
+ * Register an eventfd to be signalled by a syncobj. The eventfd counter will
+ * be incremented by one.
+ */
+struct drm_syncobj_eventfd {
+	__u32 handle;
+	__u32 flags;
+	__u64 point;
+	__s32 fd;
+	__u32 pad;
+};
+
+
+struct drm_syncobj_array {
+	__u64 handles;
+	__u32 count_handles;
+	__u32 pad;
+};
+
+#define DRM_SYNCOBJ_QUERY_FLAGS_LAST_SUBMITTED (1 << 0) /* last available point on timeline syncobj */
+struct drm_syncobj_timeline_array {
+	__u64 handles;
+	__u64 points;
+	__u32 count_handles;
+	__u32 flags;
+};
+
+
+/* Query current scanout sequence number */
+struct drm_crtc_get_sequence {
+	__u32 crtc_id;		/* requested crtc_id */
+	__u32 active;		/* return: crtc output is active */
+	__u64 sequence;		/* return: most recent vblank sequence */
+	__s64 sequence_ns;	/* return: most recent time of first pixel out */
+};
+
+/* Queue event to be delivered at specified sequence. Time stamp marks
+ * when the first pixel of the refresh cycle leaves the display engine
+ * for the display
+ */
+#define DRM_CRTC_SEQUENCE_RELATIVE		0x00000001	/* sequence is relative to current */
+#define DRM_CRTC_SEQUENCE_NEXT_ON_MISS		0x00000002	/* Use next sequence if we've missed */
+
+struct drm_crtc_queue_sequence {
+	__u32 crtc_id;
+	__u32 flags;
+	__u64 sequence;		/* on input, target sequence. on output, actual sequence */
+	__u64 user_data;	/* user data passed to event */
+};
+
+#define DRM_CLIENT_NAME_MAX_LEN		64
+struct drm_set_client_name {
+	__u64 name_len;
+	__u64 name;
+};
+
+
+#if defined(__cplusplus)
+}
+#endif
+
+#include "drm_mode.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+#define DRM_IOCTL_BASE			'd'
+#define DRM_IO(nr)			_IO(DRM_IOCTL_BASE,nr)
+#define DRM_IOR(nr,type)		_IOR(DRM_IOCTL_BASE,nr,type)
+#define DRM_IOW(nr,type)		_IOW(DRM_IOCTL_BASE,nr,type)
+#define DRM_IOWR(nr,type)		_IOWR(DRM_IOCTL_BASE,nr,type)
+
+#define DRM_IOCTL_VERSION		DRM_IOWR(0x00, struct drm_version)
+#define DRM_IOCTL_GET_UNIQUE		DRM_IOWR(0x01, struct drm_unique)
+#define DRM_IOCTL_GET_MAGIC		DRM_IOR( 0x02, struct drm_auth)
+#define DRM_IOCTL_IRQ_BUSID		DRM_IOWR(0x03, struct drm_irq_busid)
+#define DRM_IOCTL_GET_MAP               DRM_IOWR(0x04, struct drm_map)
+#define DRM_IOCTL_GET_CLIENT            DRM_IOWR(0x05, struct drm_client)
+#define DRM_IOCTL_GET_STATS             DRM_IOR( 0x06, struct drm_stats)
+#define DRM_IOCTL_SET_VERSION		DRM_IOWR(0x07, struct drm_set_version)
+#define DRM_IOCTL_MODESET_CTL           DRM_IOW(0x08, struct drm_modeset_ctl)
+/**
+ * DRM_IOCTL_GEM_CLOSE - Close a GEM handle.
+ *
+ * GEM handles are not reference-counted by the kernel. User-space is
+ * responsible for managing their lifetime. For example, if user-space imports
+ * the same memory object twice on the same DRM file description, the same GEM
+ * handle is returned by both imports, and user-space needs to ensure
+ * &DRM_IOCTL_GEM_CLOSE is performed once only. The same situation can happen
+ * when a memory object is allocated, then exported and imported again on the
+ * same DRM file description. The &DRM_IOCTL_MODE_GETFB2 IOCTL is an exception
+ * and always returns fresh new GEM handles even if an existing GEM handle
+ * already refers to the same memory object before the IOCTL is performed.
+ */
+#define DRM_IOCTL_GEM_CLOSE		DRM_IOW (0x09, struct drm_gem_close)
+#define DRM_IOCTL_GEM_FLINK		DRM_IOWR(0x0a, struct drm_gem_flink)
+#define DRM_IOCTL_GEM_OPEN		DRM_IOWR(0x0b, struct drm_gem_open)
+#define DRM_IOCTL_GET_CAP		DRM_IOWR(0x0c, struct drm_get_cap)
+#define DRM_IOCTL_SET_CLIENT_CAP	DRM_IOW( 0x0d, struct drm_set_client_cap)
+
+#define DRM_IOCTL_SET_UNIQUE		DRM_IOW( 0x10, struct drm_unique)
+#define DRM_IOCTL_AUTH_MAGIC		DRM_IOW( 0x11, struct drm_auth)
+#define DRM_IOCTL_BLOCK			DRM_IOWR(0x12, struct drm_block)
+#define DRM_IOCTL_UNBLOCK		DRM_IOWR(0x13, struct drm_block)
+#define DRM_IOCTL_CONTROL		DRM_IOW( 0x14, struct drm_control)
+#define DRM_IOCTL_ADD_MAP		DRM_IOWR(0x15, struct drm_map)
+#define DRM_IOCTL_ADD_BUFS		DRM_IOWR(0x16, struct drm_buf_desc)
+#define DRM_IOCTL_MARK_BUFS		DRM_IOW( 0x17, struct drm_buf_desc)
+#define DRM_IOCTL_INFO_BUFS		DRM_IOWR(0x18, struct drm_buf_info)
+#define DRM_IOCTL_MAP_BUFS		DRM_IOWR(0x19, struct drm_buf_map)
+#define DRM_IOCTL_FREE_BUFS		DRM_IOW( 0x1a, struct drm_buf_free)
+
+#define DRM_IOCTL_RM_MAP		DRM_IOW( 0x1b, struct drm_map)
+
+#define DRM_IOCTL_SET_SAREA_CTX		DRM_IOW( 0x1c, struct drm_ctx_priv_map)
+#define DRM_IOCTL_GET_SAREA_CTX 	DRM_IOWR(0x1d, struct drm_ctx_priv_map)
+
+#define DRM_IOCTL_SET_MASTER            DRM_IO(0x1e)
+#define DRM_IOCTL_DROP_MASTER           DRM_IO(0x1f)
+
+#define DRM_IOCTL_ADD_CTX		DRM_IOWR(0x20, struct drm_ctx)
+#define DRM_IOCTL_RM_CTX		DRM_IOWR(0x21, struct drm_ctx)
+#define DRM_IOCTL_MOD_CTX		DRM_IOW( 0x22, struct drm_ctx)
+#define DRM_IOCTL_GET_CTX		DRM_IOWR(0x23, struct drm_ctx)
+#define DRM_IOCTL_SWITCH_CTX		DRM_IOW( 0x24, struct drm_ctx)
+#define DRM_IOCTL_NEW_CTX		DRM_IOW( 0x25, struct drm_ctx)
+#define DRM_IOCTL_RES_CTX		DRM_IOWR(0x26, struct drm_ctx_res)
+#define DRM_IOCTL_ADD_DRAW		DRM_IOWR(0x27, struct drm_draw)
+#define DRM_IOCTL_RM_DRAW		DRM_IOWR(0x28, struct drm_draw)
+#define DRM_IOCTL_DMA			DRM_IOWR(0x29, struct drm_dma)
+#define DRM_IOCTL_LOCK			DRM_IOW( 0x2a, struct drm_lock)
+#define DRM_IOCTL_UNLOCK		DRM_IOW( 0x2b, struct drm_lock)
+#define DRM_IOCTL_FINISH		DRM_IOW( 0x2c, struct drm_lock)
+
+/**
+ * DRM_IOCTL_PRIME_HANDLE_TO_FD - Convert a GEM handle to a DMA-BUF FD.
+ *
+ * User-space sets &drm_prime_handle.handle with the GEM handle to export and
+ * &drm_prime_handle.flags, and gets back a DMA-BUF file descriptor in
+ * &drm_prime_handle.fd.
+ *
+ * The export can fail for any driver-specific reason, e.g. because export is
+ * not supported for this specific GEM handle (but might be for others).
+ *
+ * Support for exporting DMA-BUFs is advertised via &DRM_PRIME_CAP_EXPORT.
+ */
+#define DRM_IOCTL_PRIME_HANDLE_TO_FD    DRM_IOWR(0x2d, struct drm_prime_handle)
+/**
+ * DRM_IOCTL_PRIME_FD_TO_HANDLE - Convert a DMA-BUF FD to a GEM handle.
+ *
+ * User-space sets &drm_prime_handle.fd with a DMA-BUF file descriptor to
+ * import, and gets back a GEM handle in &drm_prime_handle.handle.
+ * &drm_prime_handle.flags is unused.
+ *
+ * If an existing GEM handle refers to the memory object backing the DMA-BUF,
+ * that GEM handle is returned. Therefore user-space which needs to handle
+ * arbitrary DMA-BUFs must have a user-space lookup data structure to manually
+ * reference-count duplicated GEM handles. For more information see
+ * &DRM_IOCTL_GEM_CLOSE.
+ *
+ * The import can fail for any driver-specific reason, e.g. because import is
+ * only supported for DMA-BUFs allocated on this DRM device.
+ *
+ * Support for importing DMA-BUFs is advertised via &DRM_PRIME_CAP_IMPORT.
+ */
+#define DRM_IOCTL_PRIME_FD_TO_HANDLE    DRM_IOWR(0x2e, struct drm_prime_handle)
+
+#define DRM_IOCTL_AGP_ACQUIRE		DRM_IO(  0x30)
+#define DRM_IOCTL_AGP_RELEASE		DRM_IO(  0x31)
+#define DRM_IOCTL_AGP_ENABLE		DRM_IOW( 0x32, struct drm_agp_mode)
+#define DRM_IOCTL_AGP_INFO		DRM_IOR( 0x33, struct drm_agp_info)
+#define DRM_IOCTL_AGP_ALLOC		DRM_IOWR(0x34, struct drm_agp_buffer)
+#define DRM_IOCTL_AGP_FREE		DRM_IOW( 0x35, struct drm_agp_buffer)
+#define DRM_IOCTL_AGP_BIND		DRM_IOW( 0x36, struct drm_agp_binding)
+#define DRM_IOCTL_AGP_UNBIND		DRM_IOW( 0x37, struct drm_agp_binding)
+
+#define DRM_IOCTL_SG_ALLOC		DRM_IOWR(0x38, struct drm_scatter_gather)
+#define DRM_IOCTL_SG_FREE		DRM_IOW( 0x39, struct drm_scatter_gather)
+
+#define DRM_IOCTL_WAIT_VBLANK		DRM_IOWR(0x3a, union drm_wait_vblank)
+
+#define DRM_IOCTL_CRTC_GET_SEQUENCE	DRM_IOWR(0x3b, struct drm_crtc_get_sequence)
+#define DRM_IOCTL_CRTC_QUEUE_SEQUENCE	DRM_IOWR(0x3c, struct drm_crtc_queue_sequence)
+
+#define DRM_IOCTL_UPDATE_DRAW		DRM_IOW(0x3f, struct drm_update_draw)
+
+#define DRM_IOCTL_MODE_GETRESOURCES	DRM_IOWR(0xA0, struct drm_mode_card_res)
+#define DRM_IOCTL_MODE_GETCRTC		DRM_IOWR(0xA1, struct drm_mode_crtc)
+#define DRM_IOCTL_MODE_SETCRTC		DRM_IOWR(0xA2, struct drm_mode_crtc)
+#define DRM_IOCTL_MODE_CURSOR		DRM_IOWR(0xA3, struct drm_mode_cursor)
+#define DRM_IOCTL_MODE_GETGAMMA		DRM_IOWR(0xA4, struct drm_mode_crtc_lut)
+#define DRM_IOCTL_MODE_SETGAMMA		DRM_IOWR(0xA5, struct drm_mode_crtc_lut)
+#define DRM_IOCTL_MODE_GETENCODER	DRM_IOWR(0xA6, struct drm_mode_get_encoder)
+#define DRM_IOCTL_MODE_GETCONNECTOR	DRM_IOWR(0xA7, struct drm_mode_get_connector)
+#define DRM_IOCTL_MODE_ATTACHMODE	DRM_IOWR(0xA8, struct drm_mode_mode_cmd) /* deprecated (never worked) */
+#define DRM_IOCTL_MODE_DETACHMODE	DRM_IOWR(0xA9, struct drm_mode_mode_cmd) /* deprecated (never worked) */
+
+#define DRM_IOCTL_MODE_GETPROPERTY	DRM_IOWR(0xAA, struct drm_mode_get_property)
+#define DRM_IOCTL_MODE_SETPROPERTY	DRM_IOWR(0xAB, struct drm_mode_connector_set_property)
+#define DRM_IOCTL_MODE_GETPROPBLOB	DRM_IOWR(0xAC, struct drm_mode_get_blob)
+#define DRM_IOCTL_MODE_GETFB		DRM_IOWR(0xAD, struct drm_mode_fb_cmd)
+#define DRM_IOCTL_MODE_ADDFB		DRM_IOWR(0xAE, struct drm_mode_fb_cmd)
+/**
+ * DRM_IOCTL_MODE_RMFB - Remove a framebuffer.
+ *
+ * This removes a framebuffer previously added via ADDFB/ADDFB2. The IOCTL
+ * argument is a framebuffer object ID.
+ *
+ * Warning: removing a framebuffer currently in-use on an enabled plane will
+ * disable that plane. The CRTC the plane is linked to may also be disabled
+ * (depending on driver capabilities).
+ */
+#define DRM_IOCTL_MODE_RMFB		DRM_IOWR(0xAF, unsigned int)
+#define DRM_IOCTL_MODE_PAGE_FLIP	DRM_IOWR(0xB0, struct drm_mode_crtc_page_flip)
+#define DRM_IOCTL_MODE_DIRTYFB		DRM_IOWR(0xB1, struct drm_mode_fb_dirty_cmd)
+
+/**
+ * DRM_IOCTL_MODE_CREATE_DUMB - Create a new dumb buffer object.
+ *
+ * KMS dumb buffers provide a very primitive way to allocate a buffer object
+ * suitable for scanout and map it for software rendering. KMS dumb buffers are
+ * not suitable for hardware-accelerated rendering nor video decoding. KMS dumb
+ * buffers are not suitable to be displayed on any other device than the KMS
+ * device where they were allocated from. Also see
+ * :ref:`kms_dumb_buffer_objects`.
+ *
+ * The IOCTL argument is a struct drm_mode_create_dumb.
+ *
+ * User-space is expected to create a KMS dumb buffer via this IOCTL, then add
+ * it as a KMS framebuffer via &DRM_IOCTL_MODE_ADDFB and map it via
+ * &DRM_IOCTL_MODE_MAP_DUMB.
+ *
+ * &DRM_CAP_DUMB_BUFFER indicates whether this IOCTL is supported.
+ * &DRM_CAP_DUMB_PREFERRED_DEPTH and &DRM_CAP_DUMB_PREFER_SHADOW indicate
+ * driver preferences for dumb buffers.
+ */
+#define DRM_IOCTL_MODE_CREATE_DUMB DRM_IOWR(0xB2, struct drm_mode_create_dumb)
+#define DRM_IOCTL_MODE_MAP_DUMB    DRM_IOWR(0xB3, struct drm_mode_map_dumb)
+#define DRM_IOCTL_MODE_DESTROY_DUMB    DRM_IOWR(0xB4, struct drm_mode_destroy_dumb)
+#define DRM_IOCTL_MODE_GETPLANERESOURCES DRM_IOWR(0xB5, struct drm_mode_get_plane_res)
+#define DRM_IOCTL_MODE_GETPLANE	DRM_IOWR(0xB6, struct drm_mode_get_plane)
+#define DRM_IOCTL_MODE_SETPLANE	DRM_IOWR(0xB7, struct drm_mode_set_plane)
+#define DRM_IOCTL_MODE_ADDFB2		DRM_IOWR(0xB8, struct drm_mode_fb_cmd2)
+#define DRM_IOCTL_MODE_OBJ_GETPROPERTIES	DRM_IOWR(0xB9, struct drm_mode_obj_get_properties)
+#define DRM_IOCTL_MODE_OBJ_SETPROPERTY	DRM_IOWR(0xBA, struct drm_mode_obj_set_property)
+#define DRM_IOCTL_MODE_CURSOR2		DRM_IOWR(0xBB, struct drm_mode_cursor2)
+#define DRM_IOCTL_MODE_ATOMIC		DRM_IOWR(0xBC, struct drm_mode_atomic)
+#define DRM_IOCTL_MODE_CREATEPROPBLOB	DRM_IOWR(0xBD, struct drm_mode_create_blob)
+#define DRM_IOCTL_MODE_DESTROYPROPBLOB	DRM_IOWR(0xBE, struct drm_mode_destroy_blob)
+
+#define DRM_IOCTL_SYNCOBJ_CREATE	DRM_IOWR(0xBF, struct drm_syncobj_create)
+#define DRM_IOCTL_SYNCOBJ_DESTROY	DRM_IOWR(0xC0, struct drm_syncobj_destroy)
+#define DRM_IOCTL_SYNCOBJ_HANDLE_TO_FD	DRM_IOWR(0xC1, struct drm_syncobj_handle)
+#define DRM_IOCTL_SYNCOBJ_FD_TO_HANDLE	DRM_IOWR(0xC2, struct drm_syncobj_handle)
+#define DRM_IOCTL_SYNCOBJ_WAIT		DRM_IOWR(0xC3, struct drm_syncobj_wait)
+#define DRM_IOCTL_SYNCOBJ_RESET		DRM_IOWR(0xC4, struct drm_syncobj_array)
+#define DRM_IOCTL_SYNCOBJ_SIGNAL	DRM_IOWR(0xC5, struct drm_syncobj_array)
+
+#define DRM_IOCTL_MODE_CREATE_LEASE	DRM_IOWR(0xC6, struct drm_mode_create_lease)
+#define DRM_IOCTL_MODE_LIST_LESSEES	DRM_IOWR(0xC7, struct drm_mode_list_lessees)
+#define DRM_IOCTL_MODE_GET_LEASE	DRM_IOWR(0xC8, struct drm_mode_get_lease)
+#define DRM_IOCTL_MODE_REVOKE_LEASE	DRM_IOWR(0xC9, struct drm_mode_revoke_lease)
+
+#define DRM_IOCTL_SYNCOBJ_TIMELINE_WAIT	DRM_IOWR(0xCA, struct drm_syncobj_timeline_wait)
+#define DRM_IOCTL_SYNCOBJ_QUERY		DRM_IOWR(0xCB, struct drm_syncobj_timeline_array)
+#define DRM_IOCTL_SYNCOBJ_TRANSFER	DRM_IOWR(0xCC, struct drm_syncobj_transfer)
+#define DRM_IOCTL_SYNCOBJ_TIMELINE_SIGNAL	DRM_IOWR(0xCD, struct drm_syncobj_timeline_array)
+
+/**
+ * DRM_IOCTL_MODE_GETFB2 - Get framebuffer metadata.
+ *
+ * This queries metadata about a framebuffer. User-space fills
+ * &drm_mode_fb_cmd2.fb_id as the input, and the kernels fills the rest of the
+ * struct as the output.
+ *
+ * If the client is DRM master or has &CAP_SYS_ADMIN, &drm_mode_fb_cmd2.handles
+ * will be filled with GEM buffer handles. Fresh new GEM handles are always
+ * returned, even if another GEM handle referring to the same memory object
+ * already exists on the DRM file description. The caller is responsible for
+ * removing the new handles, e.g. via the &DRM_IOCTL_GEM_CLOSE IOCTL. The same
+ * new handle will be returned for multiple planes in case they use the same
+ * memory object. Planes are valid until one has a zero handle -- this can be
+ * used to compute the number of planes.
+ *
+ * Otherwise, &drm_mode_fb_cmd2.handles will be zeroed and planes are valid
+ * until one has a zero &drm_mode_fb_cmd2.pitches.
+ *
+ * If the framebuffer has a format modifier, &DRM_MODE_FB_MODIFIERS will be set
+ * in &drm_mode_fb_cmd2.flags and &drm_mode_fb_cmd2.modifier will contain the
+ * modifier. Otherwise, user-space must ignore &drm_mode_fb_cmd2.modifier.
+ *
+ * To obtain DMA-BUF FDs for each plane without leaking GEM handles, user-space
+ * can export each handle via &DRM_IOCTL_PRIME_HANDLE_TO_FD, then immediately
+ * close each unique handle via &DRM_IOCTL_GEM_CLOSE, making sure to not
+ * double-close handles which are specified multiple times in the array.
+ */
+#define DRM_IOCTL_MODE_GETFB2		DRM_IOWR(0xCE, struct drm_mode_fb_cmd2)
+
+/**
+ * DRM_IOCTL_SYNCOBJ_EVENTFD - Register an eventfd to be signalled by a syncobj.
+ *
+ * This can be used to integrate a syncobj in an event loop.
+ *
+ * The IOCTL argument is a struct drm_syncobj_eventfd.
+ */
+#define DRM_IOCTL_SYNCOBJ_EVENTFD	DRM_IOWR(0xCF, struct drm_syncobj_eventfd)
+
+/**
+ * DRM_IOCTL_MODE_CLOSEFB - Close a framebuffer.
+ *
+ * This closes a framebuffer previously added via ADDFB/ADDFB2. The IOCTL
+ * argument is a framebuffer object ID.
+ *
+ * This IOCTL is similar to &DRM_IOCTL_MODE_RMFB, except it doesn't disable
+ * planes and CRTCs. As long as the framebuffer is used by a plane, it's kept
+ * alive. When the plane no longer uses the framebuffer (because the
+ * framebuffer is replaced with another one, or the plane is disabled), the
+ * framebuffer is cleaned up.
+ *
+ * This is useful to implement flicker-free transitions between two processes.
+ *
+ * Depending on the threat model, user-space may want to ensure that the
+ * framebuffer doesn't expose any sensitive user information: closed
+ * framebuffers attached to a plane can be read back by the next DRM master.
+ */
+#define DRM_IOCTL_MODE_CLOSEFB		DRM_IOWR(0xD0, struct drm_mode_closefb)
+
+/**
+ * DRM_IOCTL_SET_CLIENT_NAME - Attach a name to a drm_file
+ *
+ * Having a name allows for easier tracking and debugging.
+ * The length of the name (without null ending char) must be
+ * <= DRM_CLIENT_NAME_MAX_LEN.
+ * The call will fail if the name contains whitespaces or non-printable chars.
+ */
+#define DRM_IOCTL_SET_CLIENT_NAME	DRM_IOWR(0xD1, struct drm_set_client_name)
+
+/**
+ * DRM_IOCTL_GEM_CHANGE_HANDLE - Move an object to a different handle
+ *
+ * Some applications (notably CRIU) need objects to have specific gem handles.
+ * This ioctl changes the object at one gem handle to use a new gem handle.
+ */
+#define DRM_IOCTL_GEM_CHANGE_HANDLE    DRM_IOWR(0xD2, struct drm_gem_change_handle)
+
+/*
+ * Device specific ioctls should only be in their respective headers
+ * The device specific ioctl range is from 0x40 to 0x9f.
+ * Generic IOCTLS restart at 0xA0.
+ *
+ * \sa drmCommandNone(), drmCommandRead(), drmCommandWrite(), and
+ * drmCommandReadWrite().
+ */
+#define DRM_COMMAND_BASE                0x40
+#define DRM_COMMAND_END			0xA0
+
+/**
+ * struct drm_event - Header for DRM events
+ * @type: event type.
+ * @length: total number of payload bytes (including header).
+ *
+ * This struct is a header for events written back to user-space on the DRM FD.
+ * A read on the DRM FD will always only return complete events: e.g. if the
+ * read buffer is 100 bytes large and there are two 64 byte events pending,
+ * only one will be returned.
+ *
+ * Event types 0 - 0x7fffffff are generic DRM events, 0x80000000 and
+ * up are chipset specific. Generic DRM events include &DRM_EVENT_VBLANK,
+ * &DRM_EVENT_FLIP_COMPLETE and &DRM_EVENT_CRTC_SEQUENCE.
+ */
+struct drm_event {
+	__u32 type;
+	__u32 length;
+};
+
+/**
+ * DRM_EVENT_VBLANK - vertical blanking event
+ *
+ * This event is sent in response to &DRM_IOCTL_WAIT_VBLANK with the
+ * &_DRM_VBLANK_EVENT flag set.
+ *
+ * The event payload is a struct drm_event_vblank.
+ */
+#define DRM_EVENT_VBLANK 0x01
+/**
+ * DRM_EVENT_FLIP_COMPLETE - page-flip completion event
+ *
+ * This event is sent in response to an atomic commit or legacy page-flip with
+ * the &DRM_MODE_PAGE_FLIP_EVENT flag set.
+ *
+ * The event payload is a struct drm_event_vblank.
+ */
+#define DRM_EVENT_FLIP_COMPLETE 0x02
+/**
+ * DRM_EVENT_CRTC_SEQUENCE - CRTC sequence event
+ *
+ * This event is sent in response to &DRM_IOCTL_CRTC_QUEUE_SEQUENCE.
+ *
+ * The event payload is a struct drm_event_crtc_sequence.
+ */
+#define DRM_EVENT_CRTC_SEQUENCE	0x03
+
+struct drm_event_vblank {
+	struct drm_event base;
+	__u64 user_data;
+	__u32 tv_sec;
+	__u32 tv_usec;
+	__u32 sequence;
+	__u32 crtc_id; /* 0 on older kernels that do not support this */
+};
+
+/* Event delivered at sequence. Time stamp marks when the first pixel
+ * of the refresh cycle leaves the display engine for the display
+ */
+struct drm_event_crtc_sequence {
+	struct drm_event	base;
+	__u64			user_data;
+	__s64			time_ns;
+	__u64			sequence;
+};
+
+/* typedef area */
+#ifndef __KERNEL__
+typedef struct drm_clip_rect drm_clip_rect_t;
+typedef struct drm_drawable_info drm_drawable_info_t;
+typedef struct drm_tex_region drm_tex_region_t;
+typedef struct drm_hw_lock drm_hw_lock_t;
+typedef struct drm_version drm_version_t;
+typedef struct drm_unique drm_unique_t;
+typedef struct drm_list drm_list_t;
+typedef struct drm_block drm_block_t;
+typedef struct drm_control drm_control_t;
+typedef enum drm_map_type drm_map_type_t;
+typedef enum drm_map_flags drm_map_flags_t;
+typedef struct drm_ctx_priv_map drm_ctx_priv_map_t;
+typedef struct drm_map drm_map_t;
+typedef struct drm_client drm_client_t;
+typedef enum drm_stat_type drm_stat_type_t;
+typedef struct drm_stats drm_stats_t;
+typedef enum drm_lock_flags drm_lock_flags_t;
+typedef struct drm_lock drm_lock_t;
+typedef enum drm_dma_flags drm_dma_flags_t;
+typedef struct drm_buf_desc drm_buf_desc_t;
+typedef struct drm_buf_info drm_buf_info_t;
+typedef struct drm_buf_free drm_buf_free_t;
+typedef struct drm_buf_pub drm_buf_pub_t;
+typedef struct drm_buf_map drm_buf_map_t;
+typedef struct drm_dma drm_dma_t;
+typedef union drm_wait_vblank drm_wait_vblank_t;
+typedef struct drm_agp_mode drm_agp_mode_t;
+typedef enum drm_ctx_flags drm_ctx_flags_t;
+typedef struct drm_ctx drm_ctx_t;
+typedef struct drm_ctx_res drm_ctx_res_t;
+typedef struct drm_draw drm_draw_t;
+typedef struct drm_update_draw drm_update_draw_t;
+typedef struct drm_auth drm_auth_t;
+typedef struct drm_irq_busid drm_irq_busid_t;
+typedef enum drm_vblank_seq_type drm_vblank_seq_type_t;
+
+typedef struct drm_agp_buffer drm_agp_buffer_t;
+typedef struct drm_agp_binding drm_agp_binding_t;
+typedef struct drm_agp_info drm_agp_info_t;
+typedef struct drm_scatter_gather drm_scatter_gather_t;
+typedef struct drm_set_version drm_set_version_t;
+#endif
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif
diff --git a/tools/perf/trace/beauty/include/uapi/drm/i915_drm.h b/tools/perf/trace/beauty/include/uapi/drm/i915_drm.h
new file mode 100644
index 000000000..535cb68fd
--- /dev/null
+++ b/tools/perf/trace/beauty/include/uapi/drm/i915_drm.h
@@ -0,0 +1,3916 @@
+/*
+ * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
+ * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef _UAPI_I915_DRM_H_
+#define _UAPI_I915_DRM_H_
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/* Please note that modifications to all structs defined here are
+ * subject to backwards-compatibility constraints.
+ */
+
+/**
+ * DOC: uevents generated by i915 on its device node
+ *
+ * I915_L3_PARITY_UEVENT - Generated when the driver receives a parity mismatch
+ *	event from the GPU L3 cache. Additional information supplied is ROW,
+ *	BANK, SUBBANK, SLICE of the affected cacheline. Userspace should keep
+ *	track of these events, and if a specific cache-line seems to have a
+ *	persistent error, remap it with the L3 remapping tool supplied in
+ *	intel-gpu-tools.  The value supplied with the event is always 1.
+ *
+ * I915_ERROR_UEVENT - Generated upon error detection, currently only via
+ *	hangcheck. The error detection event is a good indicator of when things
+ *	began to go badly. The value supplied with the event is a 1 upon error
+ *	detection, and a 0 upon reset completion, signifying no more error
+ *	exists. NOTE: Disabling hangcheck or reset via module parameter will
+ *	cause the related events to not be seen.
+ *
+ * I915_RESET_UEVENT - Event is generated just before an attempt to reset the
+ *	GPU. The value supplied with the event is always 1. NOTE: Disable
+ *	reset via module parameter will cause this event to not be seen.
+ */
+#define I915_L3_PARITY_UEVENT		"L3_PARITY_ERROR"
+#define I915_ERROR_UEVENT		"ERROR"
+#define I915_RESET_UEVENT		"RESET"
+
+/**
+ * struct i915_user_extension - Base class for defining a chain of extensions
+ *
+ * Many interfaces need to grow over time. In most cases we can simply
+ * extend the struct and have userspace pass in more data. Another option,
+ * as demonstrated by Vulkan's approach to providing extensions for forward
+ * and backward compatibility, is to use a list of optional structs to
+ * provide those extra details.
+ *
+ * The key advantage to using an extension chain is that it allows us to
+ * redefine the interface more easily than an ever growing struct of
+ * increasing complexity, and for large parts of that interface to be
+ * entirely optional. The downside is more pointer chasing; chasing across
+ * the __user boundary with pointers encapsulated inside u64.
+ *
+ * Example chaining:
+ *
+ * .. code-block:: C
+ *
+ *	struct i915_user_extension ext3 {
+ *		.next_extension = 0, // end
+ *		.name = ...,
+ *	};
+ *	struct i915_user_extension ext2 {
+ *		.next_extension = (uintptr_t)&ext3,
+ *		.name = ...,
+ *	};
+ *	struct i915_user_extension ext1 {
+ *		.next_extension = (uintptr_t)&ext2,
+ *		.name = ...,
+ *	};
+ *
+ * Typically the struct i915_user_extension would be embedded in some uAPI
+ * struct, and in this case we would feed it the head of the chain(i.e ext1),
+ * which would then apply all of the above extensions.
+ *
+ */
+struct i915_user_extension {
+	/**
+	 * @next_extension:
+	 *
+	 * Pointer to the next struct i915_user_extension, or zero if the end.
+	 */
+	__u64 next_extension;
+	/**
+	 * @name: Name of the extension.
+	 *
+	 * Note that the name here is just some integer.
+	 *
+	 * Also note that the name space for this is not global for the whole
+	 * driver, but rather its scope/meaning is limited to the specific piece
+	 * of uAPI which has embedded the struct i915_user_extension.
+	 */
+	__u32 name;
+	/**
+	 * @flags: MBZ
+	 *
+	 * All undefined bits must be zero.
+	 */
+	__u32 flags;
+	/**
+	 * @rsvd: MBZ
+	 *
+	 * Reserved for future use; must be zero.
+	 */
+	__u32 rsvd[4];
+};
+
+/*
+ * MOCS indexes used for GPU surfaces, defining the cacheability of the
+ * surface data and the coherency for this data wrt. CPU vs. GPU accesses.
+ */
+enum i915_mocs_table_index {
+	/*
+	 * Not cached anywhere, coherency between CPU and GPU accesses is
+	 * guaranteed.
+	 */
+	I915_MOCS_UNCACHED,
+	/*
+	 * Cacheability and coherency controlled by the kernel automatically
+	 * based on the DRM_I915_GEM_SET_CACHING IOCTL setting and the current
+	 * usage of the surface (used for display scanout or not).
+	 */
+	I915_MOCS_PTE,
+	/*
+	 * Cached in all GPU caches available on the platform.
+	 * Coherency between CPU and GPU accesses to the surface is not
+	 * guaranteed without extra synchronization.
+	 */
+	I915_MOCS_CACHED,
+};
+
+/**
+ * enum drm_i915_gem_engine_class - uapi engine type enumeration
+ *
+ * Different engines serve different roles, and there may be more than one
+ * engine serving each role.  This enum provides a classification of the role
+ * of the engine, which may be used when requesting operations to be performed
+ * on a certain subset of engines, or for providing information about that
+ * group.
+ */
+enum drm_i915_gem_engine_class {
+	/**
+	 * @I915_ENGINE_CLASS_RENDER:
+	 *
+	 * Render engines support instructions used for 3D, Compute (GPGPU),
+	 * and programmable media workloads.  These instructions fetch data and
+	 * dispatch individual work items to threads that operate in parallel.
+	 * The threads run small programs (called "kernels" or "shaders") on
+	 * the GPU's execution units (EUs).
+	 */
+	I915_ENGINE_CLASS_RENDER	= 0,
+
+	/**
+	 * @I915_ENGINE_CLASS_COPY:
+	 *
+	 * Copy engines (also referred to as "blitters") support instructions
+	 * that move blocks of data from one location in memory to another,
+	 * or that fill a specified location of memory with fixed data.
+	 * Copy engines can perform pre-defined logical or bitwise operations
+	 * on the source, destination, or pattern data.
+	 */
+	I915_ENGINE_CLASS_COPY		= 1,
+
+	/**
+	 * @I915_ENGINE_CLASS_VIDEO:
+	 *
+	 * Video engines (also referred to as "bit stream decode" (BSD) or
+	 * "vdbox") support instructions that perform fixed-function media
+	 * decode and encode.
+	 */
+	I915_ENGINE_CLASS_VIDEO		= 2,
+
+	/**
+	 * @I915_ENGINE_CLASS_VIDEO_ENHANCE:
+	 *
+	 * Video enhancement engines (also referred to as "vebox") support
+	 * instructions related to image enhancement.
+	 */
+	I915_ENGINE_CLASS_VIDEO_ENHANCE	= 3,
+
+	/**
+	 * @I915_ENGINE_CLASS_COMPUTE:
+	 *
+	 * Compute engines support a subset of the instructions available
+	 * on render engines:  compute engines support Compute (GPGPU) and
+	 * programmable media workloads, but do not support the 3D pipeline.
+	 */
+	I915_ENGINE_CLASS_COMPUTE	= 4,
+
+	/* Values in this enum should be kept compact. */
+
+	/**
+	 * @I915_ENGINE_CLASS_INVALID:
+	 *
+	 * Placeholder value to represent an invalid engine class assignment.
+	 */
+	I915_ENGINE_CLASS_INVALID	= -1
+};
+
+/**
+ * struct i915_engine_class_instance - Engine class/instance identifier
+ *
+ * There may be more than one engine fulfilling any role within the system.
+ * Each engine of a class is given a unique instance number and therefore
+ * any engine can be specified by its class:instance tuplet. APIs that allow
+ * access to any engine in the system will use struct i915_engine_class_instance
+ * for this identification.
+ */
+struct i915_engine_class_instance {
+	/**
+	 * @engine_class:
+	 *
+	 * Engine class from enum drm_i915_gem_engine_class
+	 */
+	__u16 engine_class;
+#define I915_ENGINE_CLASS_INVALID_NONE -1
+#define I915_ENGINE_CLASS_INVALID_VIRTUAL -2
+
+	/**
+	 * @engine_instance:
+	 *
+	 * Engine instance.
+	 */
+	__u16 engine_instance;
+};
+
+/**
+ * DOC: perf_events exposed by i915 through /sys/bus/event_sources/drivers/i915
+ *
+ */
+
+enum drm_i915_pmu_engine_sample {
+	I915_SAMPLE_BUSY = 0,
+	I915_SAMPLE_WAIT = 1,
+	I915_SAMPLE_SEMA = 2
+};
+
+#define I915_PMU_SAMPLE_BITS (4)
+#define I915_PMU_SAMPLE_MASK (0xf)
+#define I915_PMU_SAMPLE_INSTANCE_BITS (8)
+#define I915_PMU_CLASS_SHIFT \
+	(I915_PMU_SAMPLE_BITS + I915_PMU_SAMPLE_INSTANCE_BITS)
+
+#define __I915_PMU_ENGINE(class, instance, sample) \
+	((class) << I915_PMU_CLASS_SHIFT | \
+	(instance) << I915_PMU_SAMPLE_BITS | \
+	(sample))
+
+#define I915_PMU_ENGINE_BUSY(class, instance) \
+	__I915_PMU_ENGINE(class, instance, I915_SAMPLE_BUSY)
+
+#define I915_PMU_ENGINE_WAIT(class, instance) \
+	__I915_PMU_ENGINE(class, instance, I915_SAMPLE_WAIT)
+
+#define I915_PMU_ENGINE_SEMA(class, instance) \
+	__I915_PMU_ENGINE(class, instance, I915_SAMPLE_SEMA)
+
+/*
+ * Top 4 bits of every non-engine counter are GT id.
+ */
+#define __I915_PMU_GT_SHIFT (60)
+
+#define ___I915_PMU_OTHER(gt, x) \
+	(((__u64)__I915_PMU_ENGINE(0xff, 0xff, 0xf) + 1 + (x)) | \
+	((__u64)(gt) << __I915_PMU_GT_SHIFT))
+
+#define __I915_PMU_OTHER(x) ___I915_PMU_OTHER(0, x)
+
+#define I915_PMU_ACTUAL_FREQUENCY	__I915_PMU_OTHER(0)
+#define I915_PMU_REQUESTED_FREQUENCY	__I915_PMU_OTHER(1)
+#define I915_PMU_INTERRUPTS		__I915_PMU_OTHER(2)
+#define I915_PMU_RC6_RESIDENCY		__I915_PMU_OTHER(3)
+#define I915_PMU_SOFTWARE_GT_AWAKE_TIME	__I915_PMU_OTHER(4)
+
+#define I915_PMU_LAST /* Deprecated - do not use */ I915_PMU_RC6_RESIDENCY
+
+#define __I915_PMU_ACTUAL_FREQUENCY(gt)		___I915_PMU_OTHER(gt, 0)
+#define __I915_PMU_REQUESTED_FREQUENCY(gt)	___I915_PMU_OTHER(gt, 1)
+#define __I915_PMU_INTERRUPTS(gt)		___I915_PMU_OTHER(gt, 2)
+#define __I915_PMU_RC6_RESIDENCY(gt)		___I915_PMU_OTHER(gt, 3)
+#define __I915_PMU_SOFTWARE_GT_AWAKE_TIME(gt)	___I915_PMU_OTHER(gt, 4)
+
+/* Each region is a minimum of 16k, and there are at most 255 of them.
+ */
+#define I915_NR_TEX_REGIONS 255	/* table size 2k - maximum due to use
+				 * of chars for next/prev indices */
+#define I915_LOG_MIN_TEX_REGION_SIZE 14
+
+typedef struct _drm_i915_init {
+	enum {
+		I915_INIT_DMA = 0x01,
+		I915_CLEANUP_DMA = 0x02,
+		I915_RESUME_DMA = 0x03
+	} func;
+	unsigned int mmio_offset;
+	int sarea_priv_offset;
+	unsigned int ring_start;
+	unsigned int ring_end;
+	unsigned int ring_size;
+	unsigned int front_offset;
+	unsigned int back_offset;
+	unsigned int depth_offset;
+	unsigned int w;
+	unsigned int h;
+	unsigned int pitch;
+	unsigned int pitch_bits;
+	unsigned int back_pitch;
+	unsigned int depth_pitch;
+	unsigned int cpp;
+	unsigned int chipset;
+} drm_i915_init_t;
+
+typedef struct _drm_i915_sarea {
+	struct drm_tex_region texList[I915_NR_TEX_REGIONS + 1];
+	int last_upload;	/* last time texture was uploaded */
+	int last_enqueue;	/* last time a buffer was enqueued */
+	int last_dispatch;	/* age of the most recently dispatched buffer */
+	int ctxOwner;		/* last context to upload state */
+	int texAge;
+	int pf_enabled;		/* is pageflipping allowed? */
+	int pf_active;
+	int pf_current_page;	/* which buffer is being displayed? */
+	int perf_boxes;		/* performance boxes to be displayed */
+	int width, height;      /* screen size in pixels */
+
+	drm_handle_t front_handle;
+	int front_offset;
+	int front_size;
+
+	drm_handle_t back_handle;
+	int back_offset;
+	int back_size;
+
+	drm_handle_t depth_handle;
+	int depth_offset;
+	int depth_size;
+
+	drm_handle_t tex_handle;
+	int tex_offset;
+	int tex_size;
+	int log_tex_granularity;
+	int pitch;
+	int rotation;           /* 0, 90, 180 or 270 */
+	int rotated_offset;
+	int rotated_size;
+	int rotated_pitch;
+	int virtualX, virtualY;
+
+	unsigned int front_tiled;
+	unsigned int back_tiled;
+	unsigned int depth_tiled;
+	unsigned int rotated_tiled;
+	unsigned int rotated2_tiled;
+
+	int pipeA_x;
+	int pipeA_y;
+	int pipeA_w;
+	int pipeA_h;
+	int pipeB_x;
+	int pipeB_y;
+	int pipeB_w;
+	int pipeB_h;
+
+	/* fill out some space for old userspace triple buffer */
+	drm_handle_t unused_handle;
+	__u32 unused1, unused2, unused3;
+
+	/* buffer object handles for static buffers. May change
+	 * over the lifetime of the client.
+	 */
+	__u32 front_bo_handle;
+	__u32 back_bo_handle;
+	__u32 unused_bo_handle;
+	__u32 depth_bo_handle;
+
+} drm_i915_sarea_t;
+
+/* due to userspace building against these headers we need some compat here */
+#define planeA_x pipeA_x
+#define planeA_y pipeA_y
+#define planeA_w pipeA_w
+#define planeA_h pipeA_h
+#define planeB_x pipeB_x
+#define planeB_y pipeB_y
+#define planeB_w pipeB_w
+#define planeB_h pipeB_h
+
+/* Flags for perf_boxes
+ */
+#define I915_BOX_RING_EMPTY    0x1
+#define I915_BOX_FLIP          0x2
+#define I915_BOX_WAIT          0x4
+#define I915_BOX_TEXTURE_LOAD  0x8
+#define I915_BOX_LOST_CONTEXT  0x10
+
+/*
+ * i915 specific ioctls.
+ *
+ * The device specific ioctl range is [DRM_COMMAND_BASE, DRM_COMMAND_END) ie
+ * [0x40, 0xa0) (a0 is excluded). The numbers below are defined as offset
+ * against DRM_COMMAND_BASE and should be between [0x0, 0x60).
+ */
+#define DRM_I915_INIT		0x00
+#define DRM_I915_FLUSH		0x01
+#define DRM_I915_FLIP		0x02
+#define DRM_I915_BATCHBUFFER	0x03
+#define DRM_I915_IRQ_EMIT	0x04
+#define DRM_I915_IRQ_WAIT	0x05
+#define DRM_I915_GETPARAM	0x06
+#define DRM_I915_SETPARAM	0x07
+#define DRM_I915_ALLOC		0x08
+#define DRM_I915_FREE		0x09
+#define DRM_I915_INIT_HEAP	0x0a
+#define DRM_I915_CMDBUFFER	0x0b
+#define DRM_I915_DESTROY_HEAP	0x0c
+#define DRM_I915_SET_VBLANK_PIPE	0x0d
+#define DRM_I915_GET_VBLANK_PIPE	0x0e
+#define DRM_I915_VBLANK_SWAP	0x0f
+#define DRM_I915_HWS_ADDR	0x11
+#define DRM_I915_GEM_INIT	0x13
+#define DRM_I915_GEM_EXECBUFFER	0x14
+#define DRM_I915_GEM_PIN	0x15
+#define DRM_I915_GEM_UNPIN	0x16
+#define DRM_I915_GEM_BUSY	0x17
+#define DRM_I915_GEM_THROTTLE	0x18
+#define DRM_I915_GEM_ENTERVT	0x19
+#define DRM_I915_GEM_LEAVEVT	0x1a
+#define DRM_I915_GEM_CREATE	0x1b
+#define DRM_I915_GEM_PREAD	0x1c
+#define DRM_I915_GEM_PWRITE	0x1d
+#define DRM_I915_GEM_MMAP	0x1e
+#define DRM_I915_GEM_SET_DOMAIN	0x1f
+#define DRM_I915_GEM_SW_FINISH	0x20
+#define DRM_I915_GEM_SET_TILING	0x21
+#define DRM_I915_GEM_GET_TILING	0x22
+#define DRM_I915_GEM_GET_APERTURE 0x23
+#define DRM_I915_GEM_MMAP_GTT	0x24
+#define DRM_I915_GET_PIPE_FROM_CRTC_ID	0x25
+#define DRM_I915_GEM_MADVISE	0x26
+#define DRM_I915_OVERLAY_PUT_IMAGE	0x27
+#define DRM_I915_OVERLAY_ATTRS	0x28
+#define DRM_I915_GEM_EXECBUFFER2	0x29
+#define DRM_I915_GEM_EXECBUFFER2_WR	DRM_I915_GEM_EXECBUFFER2
+#define DRM_I915_GET_SPRITE_COLORKEY	0x2a
+#define DRM_I915_SET_SPRITE_COLORKEY	0x2b
+#define DRM_I915_GEM_WAIT	0x2c
+#define DRM_I915_GEM_CONTEXT_CREATE	0x2d
+#define DRM_I915_GEM_CONTEXT_DESTROY	0x2e
+#define DRM_I915_GEM_SET_CACHING	0x2f
+#define DRM_I915_GEM_GET_CACHING	0x30
+#define DRM_I915_REG_READ		0x31
+#define DRM_I915_GET_RESET_STATS	0x32
+#define DRM_I915_GEM_USERPTR		0x33
+#define DRM_I915_GEM_CONTEXT_GETPARAM	0x34
+#define DRM_I915_GEM_CONTEXT_SETPARAM	0x35
+#define DRM_I915_PERF_OPEN		0x36
+#define DRM_I915_PERF_ADD_CONFIG	0x37
+#define DRM_I915_PERF_REMOVE_CONFIG	0x38
+#define DRM_I915_QUERY			0x39
+#define DRM_I915_GEM_VM_CREATE		0x3a
+#define DRM_I915_GEM_VM_DESTROY		0x3b
+#define DRM_I915_GEM_CREATE_EXT		0x3c
+/* Must be kept compact -- no holes */
+
+#define DRM_IOCTL_I915_INIT		DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
+#define DRM_IOCTL_I915_FLUSH		DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
+#define DRM_IOCTL_I915_FLIP		DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLIP)
+#define DRM_IOCTL_I915_BATCHBUFFER	DRM_IOW( DRM_COMMAND_BASE + DRM_I915_BATCHBUFFER, drm_i915_batchbuffer_t)
+#define DRM_IOCTL_I915_IRQ_EMIT         DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_IRQ_EMIT, drm_i915_irq_emit_t)
+#define DRM_IOCTL_I915_IRQ_WAIT         DRM_IOW( DRM_COMMAND_BASE + DRM_I915_IRQ_WAIT, drm_i915_irq_wait_t)
+#define DRM_IOCTL_I915_GETPARAM         DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GETPARAM, drm_i915_getparam_t)
+#define DRM_IOCTL_I915_SETPARAM         DRM_IOW( DRM_COMMAND_BASE + DRM_I915_SETPARAM, drm_i915_setparam_t)
+#define DRM_IOCTL_I915_ALLOC            DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_ALLOC, drm_i915_mem_alloc_t)
+#define DRM_IOCTL_I915_FREE             DRM_IOW( DRM_COMMAND_BASE + DRM_I915_FREE, drm_i915_mem_free_t)
+#define DRM_IOCTL_I915_INIT_HEAP        DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT_HEAP, drm_i915_mem_init_heap_t)
+#define DRM_IOCTL_I915_CMDBUFFER	DRM_IOW( DRM_COMMAND_BASE + DRM_I915_CMDBUFFER, drm_i915_cmdbuffer_t)
+#define DRM_IOCTL_I915_DESTROY_HEAP	DRM_IOW( DRM_COMMAND_BASE + DRM_I915_DESTROY_HEAP, drm_i915_mem_destroy_heap_t)
+#define DRM_IOCTL_I915_SET_VBLANK_PIPE	DRM_IOW( DRM_COMMAND_BASE + DRM_I915_SET_VBLANK_PIPE, drm_i915_vblank_pipe_t)
+#define DRM_IOCTL_I915_GET_VBLANK_PIPE	DRM_IOR( DRM_COMMAND_BASE + DRM_I915_GET_VBLANK_PIPE, drm_i915_vblank_pipe_t)
+#define DRM_IOCTL_I915_VBLANK_SWAP	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_VBLANK_SWAP, drm_i915_vblank_swap_t)
+#define DRM_IOCTL_I915_HWS_ADDR		DRM_IOW(DRM_COMMAND_BASE + DRM_I915_HWS_ADDR, struct drm_i915_gem_init)
+#define DRM_IOCTL_I915_GEM_INIT		DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_INIT, struct drm_i915_gem_init)
+#define DRM_IOCTL_I915_GEM_EXECBUFFER	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER, struct drm_i915_gem_execbuffer)
+#define DRM_IOCTL_I915_GEM_EXECBUFFER2	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER2, struct drm_i915_gem_execbuffer2)
+#define DRM_IOCTL_I915_GEM_EXECBUFFER2_WR	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER2_WR, struct drm_i915_gem_execbuffer2)
+#define DRM_IOCTL_I915_GEM_PIN		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_PIN, struct drm_i915_gem_pin)
+#define DRM_IOCTL_I915_GEM_UNPIN	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_UNPIN, struct drm_i915_gem_unpin)
+#define DRM_IOCTL_I915_GEM_BUSY		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_BUSY, struct drm_i915_gem_busy)
+#define DRM_IOCTL_I915_GEM_SET_CACHING		DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_SET_CACHING, struct drm_i915_gem_caching)
+#define DRM_IOCTL_I915_GEM_GET_CACHING		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_GET_CACHING, struct drm_i915_gem_caching)
+#define DRM_IOCTL_I915_GEM_THROTTLE	DRM_IO ( DRM_COMMAND_BASE + DRM_I915_GEM_THROTTLE)
+#define DRM_IOCTL_I915_GEM_ENTERVT	DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_ENTERVT)
+#define DRM_IOCTL_I915_GEM_LEAVEVT	DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_LEAVEVT)
+#define DRM_IOCTL_I915_GEM_CREATE	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_CREATE, struct drm_i915_gem_create)
+#define DRM_IOCTL_I915_GEM_CREATE_EXT	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_CREATE_EXT, struct drm_i915_gem_create_ext)
+#define DRM_IOCTL_I915_GEM_PREAD	DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_PREAD, struct drm_i915_gem_pread)
+#define DRM_IOCTL_I915_GEM_PWRITE	DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_PWRITE, struct drm_i915_gem_pwrite)
+#define DRM_IOCTL_I915_GEM_MMAP		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MMAP, struct drm_i915_gem_mmap)
+#define DRM_IOCTL_I915_GEM_MMAP_GTT	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MMAP_GTT, struct drm_i915_gem_mmap_gtt)
+#define DRM_IOCTL_I915_GEM_MMAP_OFFSET	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MMAP_GTT, struct drm_i915_gem_mmap_offset)
+#define DRM_IOCTL_I915_GEM_SET_DOMAIN	DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_SET_DOMAIN, struct drm_i915_gem_set_domain)
+#define DRM_IOCTL_I915_GEM_SW_FINISH	DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_SW_FINISH, struct drm_i915_gem_sw_finish)
+#define DRM_IOCTL_I915_GEM_SET_TILING	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_SET_TILING, struct drm_i915_gem_set_tiling)
+#define DRM_IOCTL_I915_GEM_GET_TILING	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_TILING, struct drm_i915_gem_get_tiling)
+#define DRM_IOCTL_I915_GEM_GET_APERTURE	DRM_IOR  (DRM_COMMAND_BASE + DRM_I915_GEM_GET_APERTURE, struct drm_i915_gem_get_aperture)
+#define DRM_IOCTL_I915_GET_PIPE_FROM_CRTC_ID DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GET_PIPE_FROM_CRTC_ID, struct drm_i915_get_pipe_from_crtc_id)
+#define DRM_IOCTL_I915_GEM_MADVISE	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MADVISE, struct drm_i915_gem_madvise)
+#define DRM_IOCTL_I915_OVERLAY_PUT_IMAGE	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_OVERLAY_PUT_IMAGE, struct drm_intel_overlay_put_image)
+#define DRM_IOCTL_I915_OVERLAY_ATTRS	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_OVERLAY_ATTRS, struct drm_intel_overlay_attrs)
+#define DRM_IOCTL_I915_SET_SPRITE_COLORKEY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_SET_SPRITE_COLORKEY, struct drm_intel_sprite_colorkey)
+#define DRM_IOCTL_I915_GET_SPRITE_COLORKEY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GET_SPRITE_COLORKEY, struct drm_intel_sprite_colorkey)
+#define DRM_IOCTL_I915_GEM_WAIT		DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_WAIT, struct drm_i915_gem_wait)
+#define DRM_IOCTL_I915_GEM_CONTEXT_CREATE	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_CREATE, struct drm_i915_gem_context_create)
+#define DRM_IOCTL_I915_GEM_CONTEXT_CREATE_EXT	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_CREATE, struct drm_i915_gem_context_create_ext)
+#define DRM_IOCTL_I915_GEM_CONTEXT_DESTROY	DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_DESTROY, struct drm_i915_gem_context_destroy)
+#define DRM_IOCTL_I915_REG_READ			DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_REG_READ, struct drm_i915_reg_read)
+#define DRM_IOCTL_I915_GET_RESET_STATS		DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GET_RESET_STATS, struct drm_i915_reset_stats)
+#define DRM_IOCTL_I915_GEM_USERPTR			DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_USERPTR, struct drm_i915_gem_userptr)
+#define DRM_IOCTL_I915_GEM_CONTEXT_GETPARAM	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_GETPARAM, struct drm_i915_gem_context_param)
+#define DRM_IOCTL_I915_GEM_CONTEXT_SETPARAM	DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_SETPARAM, struct drm_i915_gem_context_param)
+#define DRM_IOCTL_I915_PERF_OPEN	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_PERF_OPEN, struct drm_i915_perf_open_param)
+#define DRM_IOCTL_I915_PERF_ADD_CONFIG	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_PERF_ADD_CONFIG, struct drm_i915_perf_oa_config)
+#define DRM_IOCTL_I915_PERF_REMOVE_CONFIG	DRM_IOW(DRM_COMMAND_BASE + DRM_I915_PERF_REMOVE_CONFIG, __u64)
+#define DRM_IOCTL_I915_QUERY			DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_QUERY, struct drm_i915_query)
+#define DRM_IOCTL_I915_GEM_VM_CREATE	DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_VM_CREATE, struct drm_i915_gem_vm_control)
+#define DRM_IOCTL_I915_GEM_VM_DESTROY	DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_VM_DESTROY, struct drm_i915_gem_vm_control)
+
+/* Allow drivers to submit batchbuffers directly to hardware, relying
+ * on the security mechanisms provided by hardware.
+ */
+typedef struct drm_i915_batchbuffer {
+	int start;		/* agp offset */
+	int used;		/* nr bytes in use */
+	int DR1;		/* hw flags for GFX_OP_DRAWRECT_INFO */
+	int DR4;		/* window origin for GFX_OP_DRAWRECT_INFO */
+	int num_cliprects;	/* mulitpass with multiple cliprects? */
+	struct drm_clip_rect __user *cliprects;	/* pointer to userspace cliprects */
+} drm_i915_batchbuffer_t;
+
+/* As above, but pass a pointer to userspace buffer which can be
+ * validated by the kernel prior to sending to hardware.
+ */
+typedef struct _drm_i915_cmdbuffer {
+	char __user *buf;	/* pointer to userspace command buffer */
+	int sz;			/* nr bytes in buf */
+	int DR1;		/* hw flags for GFX_OP_DRAWRECT_INFO */
+	int DR4;		/* window origin for GFX_OP_DRAWRECT_INFO */
+	int num_cliprects;	/* mulitpass with multiple cliprects? */
+	struct drm_clip_rect __user *cliprects;	/* pointer to userspace cliprects */
+} drm_i915_cmdbuffer_t;
+
+/* Userspace can request & wait on irq's:
+ */
+typedef struct drm_i915_irq_emit {
+	int __user *irq_seq;
+} drm_i915_irq_emit_t;
+
+typedef struct drm_i915_irq_wait {
+	int irq_seq;
+} drm_i915_irq_wait_t;
+
+/*
+ * Different modes of per-process Graphics Translation Table,
+ * see I915_PARAM_HAS_ALIASING_PPGTT
+ */
+#define I915_GEM_PPGTT_NONE	0
+#define I915_GEM_PPGTT_ALIASING	1
+#define I915_GEM_PPGTT_FULL	2
+
+/* Ioctl to query kernel params:
+ */
+#define I915_PARAM_IRQ_ACTIVE            1
+#define I915_PARAM_ALLOW_BATCHBUFFER     2
+#define I915_PARAM_LAST_DISPATCH         3
+#define I915_PARAM_CHIPSET_ID            4
+#define I915_PARAM_HAS_GEM               5
+#define I915_PARAM_NUM_FENCES_AVAIL      6
+#define I915_PARAM_HAS_OVERLAY           7
+#define I915_PARAM_HAS_PAGEFLIPPING	 8
+#define I915_PARAM_HAS_EXECBUF2          9
+#define I915_PARAM_HAS_BSD		 10
+#define I915_PARAM_HAS_BLT		 11
+#define I915_PARAM_HAS_RELAXED_FENCING	 12
+#define I915_PARAM_HAS_COHERENT_RINGS	 13
+#define I915_PARAM_HAS_EXEC_CONSTANTS	 14
+#define I915_PARAM_HAS_RELAXED_DELTA	 15
+#define I915_PARAM_HAS_GEN7_SOL_RESET	 16
+#define I915_PARAM_HAS_LLC     	 	 17
+#define I915_PARAM_HAS_ALIASING_PPGTT	 18
+#define I915_PARAM_HAS_WAIT_TIMEOUT	 19
+#define I915_PARAM_HAS_SEMAPHORES	 20
+#define I915_PARAM_HAS_PRIME_VMAP_FLUSH	 21
+#define I915_PARAM_HAS_VEBOX		 22
+#define I915_PARAM_HAS_SECURE_BATCHES	 23
+#define I915_PARAM_HAS_PINNED_BATCHES	 24
+#define I915_PARAM_HAS_EXEC_NO_RELOC	 25
+#define I915_PARAM_HAS_EXEC_HANDLE_LUT   26
+#define I915_PARAM_HAS_WT     	 	 27
+#define I915_PARAM_CMD_PARSER_VERSION	 28
+#define I915_PARAM_HAS_COHERENT_PHYS_GTT 29
+#define I915_PARAM_MMAP_VERSION          30
+#define I915_PARAM_HAS_BSD2		 31
+#define I915_PARAM_REVISION              32
+#define I915_PARAM_SUBSLICE_TOTAL	 33
+#define I915_PARAM_EU_TOTAL		 34
+#define I915_PARAM_HAS_GPU_RESET	 35
+#define I915_PARAM_HAS_RESOURCE_STREAMER 36
+#define I915_PARAM_HAS_EXEC_SOFTPIN	 37
+#define I915_PARAM_HAS_POOLED_EU	 38
+#define I915_PARAM_MIN_EU_IN_POOL	 39
+#define I915_PARAM_MMAP_GTT_VERSION	 40
+
+/*
+ * Query whether DRM_I915_GEM_EXECBUFFER2 supports user defined execution
+ * priorities and the driver will attempt to execute batches in priority order.
+ * The param returns a capability bitmask, nonzero implies that the scheduler
+ * is enabled, with different features present according to the mask.
+ *
+ * The initial priority for each batch is supplied by the context and is
+ * controlled via I915_CONTEXT_PARAM_PRIORITY.
+ */
+#define I915_PARAM_HAS_SCHEDULER	 41
+#define   I915_SCHEDULER_CAP_ENABLED	(1ul << 0)
+#define   I915_SCHEDULER_CAP_PRIORITY	(1ul << 1)
+#define   I915_SCHEDULER_CAP_PREEMPTION	(1ul << 2)
+#define   I915_SCHEDULER_CAP_SEMAPHORES	(1ul << 3)
+#define   I915_SCHEDULER_CAP_ENGINE_BUSY_STATS	(1ul << 4)
+/*
+ * Indicates the 2k user priority levels are statically mapped into 3 buckets as
+ * follows:
+ *
+ * -1k to -1	Low priority
+ * 0		Normal priority
+ * 1 to 1k	Highest priority
+ */
+#define   I915_SCHEDULER_CAP_STATIC_PRIORITY_MAP	(1ul << 5)
+
+/*
+ * Query the status of HuC load.
+ *
+ * The query can fail in the following scenarios with the listed error codes:
+ *  -ENODEV if HuC is not present on this platform,
+ *  -EOPNOTSUPP if HuC firmware usage is disabled,
+ *  -ENOPKG if HuC firmware fetch failed,
+ *  -ENOEXEC if HuC firmware is invalid or mismatched,
+ *  -ENOMEM if i915 failed to prepare the FW objects for transfer to the uC,
+ *  -EIO if the FW transfer or the FW authentication failed.
+ *
+ * If the IOCTL is successful, the returned parameter will be set to one of the
+ * following values:
+ *  * 0 if HuC firmware load is not complete,
+ *  * 1 if HuC firmware is loaded and fully authenticated,
+ *  * 2 if HuC firmware is loaded and authenticated for clear media only
+ */
+#define I915_PARAM_HUC_STATUS		 42
+
+/* Query whether DRM_I915_GEM_EXECBUFFER2 supports the ability to opt-out of
+ * synchronisation with implicit fencing on individual objects.
+ * See EXEC_OBJECT_ASYNC.
+ */
+#define I915_PARAM_HAS_EXEC_ASYNC	 43
+
+/* Query whether DRM_I915_GEM_EXECBUFFER2 supports explicit fence support -
+ * both being able to pass in a sync_file fd to wait upon before executing,
+ * and being able to return a new sync_file fd that is signaled when the
+ * current request is complete. See I915_EXEC_FENCE_IN and I915_EXEC_FENCE_OUT.
+ */
+#define I915_PARAM_HAS_EXEC_FENCE	 44
+
+/* Query whether DRM_I915_GEM_EXECBUFFER2 supports the ability to capture
+ * user-specified buffers for post-mortem debugging of GPU hangs. See
+ * EXEC_OBJECT_CAPTURE.
+ */
+#define I915_PARAM_HAS_EXEC_CAPTURE	 45
+
+#define I915_PARAM_SLICE_MASK		 46
+
+/* Assuming it's uniform for each slice, this queries the mask of subslices
+ * per-slice for this system.
+ */
+#define I915_PARAM_SUBSLICE_MASK	 47
+
+/*
+ * Query whether DRM_I915_GEM_EXECBUFFER2 supports supplying the batch buffer
+ * as the first execobject as opposed to the last. See I915_EXEC_BATCH_FIRST.
+ */
+#define I915_PARAM_HAS_EXEC_BATCH_FIRST	 48
+
+/* Query whether DRM_I915_GEM_EXECBUFFER2 supports supplying an array of
+ * drm_i915_gem_exec_fence structures.  See I915_EXEC_FENCE_ARRAY.
+ */
+#define I915_PARAM_HAS_EXEC_FENCE_ARRAY  49
+
+/*
+ * Query whether every context (both per-file default and user created) is
+ * isolated (insofar as HW supports). If this parameter is not true, then
+ * freshly created contexts may inherit values from an existing context,
+ * rather than default HW values. If true, it also ensures (insofar as HW
+ * supports) that all state set by this context will not leak to any other
+ * context.
+ *
+ * As not every engine across every gen support contexts, the returned
+ * value reports the support of context isolation for individual engines by
+ * returning a bitmask of each engine class set to true if that class supports
+ * isolation.
+ */
+#define I915_PARAM_HAS_CONTEXT_ISOLATION 50
+
+/* Frequency of the command streamer timestamps given by the *_TIMESTAMP
+ * registers. This used to be fixed per platform but from CNL onwards, this
+ * might vary depending on the parts.
+ */
+#define I915_PARAM_CS_TIMESTAMP_FREQUENCY 51
+
+/*
+ * Once upon a time we supposed that writes through the GGTT would be
+ * immediately in physical memory (once flushed out of the CPU path). However,
+ * on a few different processors and chipsets, this is not necessarily the case
+ * as the writes appear to be buffered internally. Thus a read of the backing
+ * storage (physical memory) via a different path (with different physical tags
+ * to the indirect write via the GGTT) will see stale values from before
+ * the GGTT write. Inside the kernel, we can for the most part keep track of
+ * the different read/write domains in use (e.g. set-domain), but the assumption
+ * of coherency is baked into the ABI, hence reporting its true state in this
+ * parameter.
+ *
+ * Reports true when writes via mmap_gtt are immediately visible following an
+ * lfence to flush the WCB.
+ *
+ * Reports false when writes via mmap_gtt are indeterminately delayed in an in
+ * internal buffer and are _not_ immediately visible to third parties accessing
+ * directly via mmap_cpu/mmap_wc. Use of mmap_gtt as part of an IPC
+ * communications channel when reporting false is strongly disadvised.
+ */
+#define I915_PARAM_MMAP_GTT_COHERENT	52
+
+/*
+ * Query whether DRM_I915_GEM_EXECBUFFER2 supports coordination of parallel
+ * execution through use of explicit fence support.
+ * See I915_EXEC_FENCE_OUT and I915_EXEC_FENCE_SUBMIT.
+ */
+#define I915_PARAM_HAS_EXEC_SUBMIT_FENCE 53
+
+/*
+ * Revision of the i915-perf uAPI. The value returned helps determine what
+ * i915-perf features are available. See drm_i915_perf_property_id.
+ */
+#define I915_PARAM_PERF_REVISION	54
+
+/* Query whether DRM_I915_GEM_EXECBUFFER2 supports supplying an array of
+ * timeline syncobj through drm_i915_gem_execbuffer_ext_timeline_fences. See
+ * I915_EXEC_USE_EXTENSIONS.
+ */
+#define I915_PARAM_HAS_EXEC_TIMELINE_FENCES 55
+
+/* Query if the kernel supports the I915_USERPTR_PROBE flag. */
+#define I915_PARAM_HAS_USERPTR_PROBE 56
+
+/*
+ * Frequency of the timestamps in OA reports. This used to be the same as the CS
+ * timestamp frequency, but differs on some platforms.
+ */
+#define I915_PARAM_OA_TIMESTAMP_FREQUENCY 57
+
+/*
+ * Query the status of PXP support in i915.
+ *
+ * The query can fail in the following scenarios with the listed error codes:
+ *     -ENODEV = PXP support is not available on the GPU device or in the
+ *               kernel due to missing component drivers or kernel configs.
+ *
+ * If the IOCTL is successful, the returned parameter will be set to one of
+ * the following values:
+ *     1 = PXP feature is supported and is ready for use.
+ *     2 = PXP feature is supported but should be ready soon (pending
+ *         initialization of non-i915 system dependencies).
+ *
+ * NOTE: When param is supported (positive return values), user space should
+ *       still refer to the GEM PXP context-creation UAPI header specs to be
+ *       aware of possible failure due to system state machine at the time.
+ */
+#define I915_PARAM_PXP_STATUS		 58
+
+/*
+ * Query if kernel allows marking a context to send a Freq hint to SLPC. This
+ * will enable use of the strategies allowed by the SLPC algorithm.
+ */
+#define I915_PARAM_HAS_CONTEXT_FREQ_HINT	59
+
+/* Must be kept compact -- no holes and well documented */
+
+/**
+ * struct drm_i915_getparam - Driver parameter query structure.
+ */
+struct drm_i915_getparam {
+	/** @param: Driver parameter to query. */
+	__s32 param;
+
+	/**
+	 * @value: Address of memory where queried value should be put.
+	 *
+	 * WARNING: Using pointers instead of fixed-size u64 means we need to write
+	 * compat32 code. Don't repeat this mistake.
+	 */
+	int __user *value;
+};
+
+/**
+ * typedef drm_i915_getparam_t - Driver parameter query structure.
+ * See struct drm_i915_getparam.
+ */
+typedef struct drm_i915_getparam drm_i915_getparam_t;
+
+/* Ioctl to set kernel params:
+ */
+#define I915_SETPARAM_USE_MI_BATCHBUFFER_START            1
+#define I915_SETPARAM_TEX_LRU_LOG_GRANULARITY             2
+#define I915_SETPARAM_ALLOW_BATCHBUFFER                   3
+#define I915_SETPARAM_NUM_USED_FENCES                     4
+/* Must be kept compact -- no holes */
+
+typedef struct drm_i915_setparam {
+	int param;
+	int value;
+} drm_i915_setparam_t;
+
+/* A memory manager for regions of shared memory:
+ */
+#define I915_MEM_REGION_AGP 1
+
+typedef struct drm_i915_mem_alloc {
+	int region;
+	int alignment;
+	int size;
+	int __user *region_offset;	/* offset from start of fb or agp */
+} drm_i915_mem_alloc_t;
+
+typedef struct drm_i915_mem_free {
+	int region;
+	int region_offset;
+} drm_i915_mem_free_t;
+
+typedef struct drm_i915_mem_init_heap {
+	int region;
+	int size;
+	int start;
+} drm_i915_mem_init_heap_t;
+
+/* Allow memory manager to be torn down and re-initialized (eg on
+ * rotate):
+ */
+typedef struct drm_i915_mem_destroy_heap {
+	int region;
+} drm_i915_mem_destroy_heap_t;
+
+/* Allow X server to configure which pipes to monitor for vblank signals
+ */
+#define	DRM_I915_VBLANK_PIPE_A	1
+#define	DRM_I915_VBLANK_PIPE_B	2
+
+typedef struct drm_i915_vblank_pipe {
+	int pipe;
+} drm_i915_vblank_pipe_t;
+
+/* Schedule buffer swap at given vertical blank:
+ */
+typedef struct drm_i915_vblank_swap {
+	drm_drawable_t drawable;
+	enum drm_vblank_seq_type seqtype;
+	unsigned int sequence;
+} drm_i915_vblank_swap_t;
+
+typedef struct drm_i915_hws_addr {
+	__u64 addr;
+} drm_i915_hws_addr_t;
+
+struct drm_i915_gem_init {
+	/**
+	 * Beginning offset in the GTT to be managed by the DRM memory
+	 * manager.
+	 */
+	__u64 gtt_start;
+	/**
+	 * Ending offset in the GTT to be managed by the DRM memory
+	 * manager.
+	 */
+	__u64 gtt_end;
+};
+
+struct drm_i915_gem_create {
+	/**
+	 * Requested size for the object.
+	 *
+	 * The (page-aligned) allocated size for the object will be returned.
+	 */
+	__u64 size;
+	/**
+	 * Returned handle for the object.
+	 *
+	 * Object handles are nonzero.
+	 */
+	__u32 handle;
+	__u32 pad;
+};
+
+struct drm_i915_gem_pread {
+	/** Handle for the object being read. */
+	__u32 handle;
+	__u32 pad;
+	/** Offset into the object to read from */
+	__u64 offset;
+	/** Length of data to read */
+	__u64 size;
+	/**
+	 * Pointer to write the data into.
+	 *
+	 * This is a fixed-size type for 32/64 compatibility.
+	 */
+	__u64 data_ptr;
+};
+
+struct drm_i915_gem_pwrite {
+	/** Handle for the object being written to. */
+	__u32 handle;
+	__u32 pad;
+	/** Offset into the object to write to */
+	__u64 offset;
+	/** Length of data to write */
+	__u64 size;
+	/**
+	 * Pointer to read the data from.
+	 *
+	 * This is a fixed-size type for 32/64 compatibility.
+	 */
+	__u64 data_ptr;
+};
+
+struct drm_i915_gem_mmap {
+	/** Handle for the object being mapped. */
+	__u32 handle;
+	__u32 pad;
+	/** Offset in the object to map. */
+	__u64 offset;
+	/**
+	 * Length of data to map.
+	 *
+	 * The value will be page-aligned.
+	 */
+	__u64 size;
+	/**
+	 * Returned pointer the data was mapped at.
+	 *
+	 * This is a fixed-size type for 32/64 compatibility.
+	 */
+	__u64 addr_ptr;
+
+	/**
+	 * Flags for extended behaviour.
+	 *
+	 * Added in version 2.
+	 */
+	__u64 flags;
+#define I915_MMAP_WC 0x1
+};
+
+struct drm_i915_gem_mmap_gtt {
+	/** Handle for the object being mapped. */
+	__u32 handle;
+	__u32 pad;
+	/**
+	 * Fake offset to use for subsequent mmap call
+	 *
+	 * This is a fixed-size type for 32/64 compatibility.
+	 */
+	__u64 offset;
+};
+
+/**
+ * struct drm_i915_gem_mmap_offset - Retrieve an offset so we can mmap this buffer object.
+ *
+ * This struct is passed as argument to the `DRM_IOCTL_I915_GEM_MMAP_OFFSET` ioctl,
+ * and is used to retrieve the fake offset to mmap an object specified by &handle.
+ *
+ * The legacy way of using `DRM_IOCTL_I915_GEM_MMAP` is removed on gen12+.
+ * `DRM_IOCTL_I915_GEM_MMAP_GTT` is an older supported alias to this struct, but will behave
+ * as setting the &extensions to 0, and &flags to `I915_MMAP_OFFSET_GTT`.
+ */
+struct drm_i915_gem_mmap_offset {
+	/** @handle: Handle for the object being mapped. */
+	__u32 handle;
+	/** @pad: Must be zero */
+	__u32 pad;
+	/**
+	 * @offset: The fake offset to use for subsequent mmap call
+	 *
+	 * This is a fixed-size type for 32/64 compatibility.
+	 */
+	__u64 offset;
+
+	/**
+	 * @flags: Flags for extended behaviour.
+	 *
+	 * It is mandatory that one of the `MMAP_OFFSET` types
+	 * should be included:
+	 *
+	 * - `I915_MMAP_OFFSET_GTT`: Use mmap with the object bound to GTT. (Write-Combined)
+	 * - `I915_MMAP_OFFSET_WC`: Use Write-Combined caching.
+	 * - `I915_MMAP_OFFSET_WB`: Use Write-Back caching.
+	 * - `I915_MMAP_OFFSET_FIXED`: Use object placement to determine caching.
+	 *
+	 * On devices with local memory `I915_MMAP_OFFSET_FIXED` is the only valid
+	 * type. On devices without local memory, this caching mode is invalid.
+	 *
+	 * As caching mode when specifying `I915_MMAP_OFFSET_FIXED`, WC or WB will
+	 * be used, depending on the object placement on creation. WB will be used
+	 * when the object can only exist in system memory, WC otherwise.
+	 */
+	__u64 flags;
+
+#define I915_MMAP_OFFSET_GTT	0
+#define I915_MMAP_OFFSET_WC	1
+#define I915_MMAP_OFFSET_WB	2
+#define I915_MMAP_OFFSET_UC	3
+#define I915_MMAP_OFFSET_FIXED	4
+
+	/**
+	 * @extensions: Zero-terminated chain of extensions.
+	 *
+	 * No current extensions defined; mbz.
+	 */
+	__u64 extensions;
+};
+
+/**
+ * struct drm_i915_gem_set_domain - Adjust the objects write or read domain, in
+ * preparation for accessing the pages via some CPU domain.
+ *
+ * Specifying a new write or read domain will flush the object out of the
+ * previous domain(if required), before then updating the objects domain
+ * tracking with the new domain.
+ *
+ * Note this might involve waiting for the object first if it is still active on
+ * the GPU.
+ *
+ * Supported values for @read_domains and @write_domain:
+ *
+ *	- I915_GEM_DOMAIN_WC: Uncached write-combined domain
+ *	- I915_GEM_DOMAIN_CPU: CPU cache domain
+ *	- I915_GEM_DOMAIN_GTT: Mappable aperture domain
+ *
+ * All other domains are rejected.
+ *
+ * Note that for discrete, starting from DG1, this is no longer supported, and
+ * is instead rejected. On such platforms the CPU domain is effectively static,
+ * where we also only support a single &drm_i915_gem_mmap_offset cache mode,
+ * which can't be set explicitly and instead depends on the object placements,
+ * as per the below.
+ *
+ * Implicit caching rules, starting from DG1:
+ *
+ *	- If any of the object placements (see &drm_i915_gem_create_ext_memory_regions)
+ *	  contain I915_MEMORY_CLASS_DEVICE then the object will be allocated and
+ *	  mapped as write-combined only.
+ *
+ *	- Everything else is always allocated and mapped as write-back, with the
+ *	  guarantee that everything is also coherent with the GPU.
+ *
+ * Note that this is likely to change in the future again, where we might need
+ * more flexibility on future devices, so making this all explicit as part of a
+ * new &drm_i915_gem_create_ext extension is probable.
+ */
+struct drm_i915_gem_set_domain {
+	/** @handle: Handle for the object. */
+	__u32 handle;
+
+	/** @read_domains: New read domains. */
+	__u32 read_domains;
+
+	/**
+	 * @write_domain: New write domain.
+	 *
+	 * Note that having something in the write domain implies it's in the
+	 * read domain, and only that read domain.
+	 */
+	__u32 write_domain;
+};
+
+struct drm_i915_gem_sw_finish {
+	/** Handle for the object */
+	__u32 handle;
+};
+
+struct drm_i915_gem_relocation_entry {
+	/**
+	 * Handle of the buffer being pointed to by this relocation entry.
+	 *
+	 * It's appealing to make this be an index into the mm_validate_entry
+	 * list to refer to the buffer, but this allows the driver to create
+	 * a relocation list for state buffers and not re-write it per
+	 * exec using the buffer.
+	 */
+	__u32 target_handle;
+
+	/**
+	 * Value to be added to the offset of the target buffer to make up
+	 * the relocation entry.
+	 */
+	__u32 delta;
+
+	/** Offset in the buffer the relocation entry will be written into */
+	__u64 offset;
+
+	/**
+	 * Offset value of the target buffer that the relocation entry was last
+	 * written as.
+	 *
+	 * If the buffer has the same offset as last time, we can skip syncing
+	 * and writing the relocation.  This value is written back out by
+	 * the execbuffer ioctl when the relocation is written.
+	 */
+	__u64 presumed_offset;
+
+	/**
+	 * Target memory domains read by this operation.
+	 */
+	__u32 read_domains;
+
+	/**
+	 * Target memory domains written by this operation.
+	 *
+	 * Note that only one domain may be written by the whole
+	 * execbuffer operation, so that where there are conflicts,
+	 * the application will get -EINVAL back.
+	 */
+	__u32 write_domain;
+};
+
+/** @{
+ * Intel memory domains
+ *
+ * Most of these just align with the various caches in
+ * the system and are used to flush and invalidate as
+ * objects end up cached in different domains.
+ */
+/** CPU cache */
+#define I915_GEM_DOMAIN_CPU		0x00000001
+/** Render cache, used by 2D and 3D drawing */
+#define I915_GEM_DOMAIN_RENDER		0x00000002
+/** Sampler cache, used by texture engine */
+#define I915_GEM_DOMAIN_SAMPLER		0x00000004
+/** Command queue, used to load batch buffers */
+#define I915_GEM_DOMAIN_COMMAND		0x00000008
+/** Instruction cache, used by shader programs */
+#define I915_GEM_DOMAIN_INSTRUCTION	0x00000010
+/** Vertex address cache */
+#define I915_GEM_DOMAIN_VERTEX		0x00000020
+/** GTT domain - aperture and scanout */
+#define I915_GEM_DOMAIN_GTT		0x00000040
+/** WC domain - uncached access */
+#define I915_GEM_DOMAIN_WC		0x00000080
+/** @} */
+
+struct drm_i915_gem_exec_object {
+	/**
+	 * User's handle for a buffer to be bound into the GTT for this
+	 * operation.
+	 */
+	__u32 handle;
+
+	/** Number of relocations to be performed on this buffer */
+	__u32 relocation_count;
+	/**
+	 * Pointer to array of struct drm_i915_gem_relocation_entry containing
+	 * the relocations to be performed in this buffer.
+	 */
+	__u64 relocs_ptr;
+
+	/** Required alignment in graphics aperture */
+	__u64 alignment;
+
+	/**
+	 * Returned value of the updated offset of the object, for future
+	 * presumed_offset writes.
+	 */
+	__u64 offset;
+};
+
+/* DRM_IOCTL_I915_GEM_EXECBUFFER was removed in Linux 5.13 */
+struct drm_i915_gem_execbuffer {
+	/**
+	 * List of buffers to be validated with their relocations to be
+	 * performend on them.
+	 *
+	 * This is a pointer to an array of struct drm_i915_gem_validate_entry.
+	 *
+	 * These buffers must be listed in an order such that all relocations
+	 * a buffer is performing refer to buffers that have already appeared
+	 * in the validate list.
+	 */
+	__u64 buffers_ptr;
+	__u32 buffer_count;
+
+	/** Offset in the batchbuffer to start execution from. */
+	__u32 batch_start_offset;
+	/** Bytes used in batchbuffer from batch_start_offset */
+	__u32 batch_len;
+	__u32 DR1;
+	__u32 DR4;
+	__u32 num_cliprects;
+	/** This is a struct drm_clip_rect *cliprects */
+	__u64 cliprects_ptr;
+};
+
+struct drm_i915_gem_exec_object2 {
+	/**
+	 * User's handle for a buffer to be bound into the GTT for this
+	 * operation.
+	 */
+	__u32 handle;
+
+	/** Number of relocations to be performed on this buffer */
+	__u32 relocation_count;
+	/**
+	 * Pointer to array of struct drm_i915_gem_relocation_entry containing
+	 * the relocations to be performed in this buffer.
+	 */
+	__u64 relocs_ptr;
+
+	/** Required alignment in graphics aperture */
+	__u64 alignment;
+
+	/**
+	 * When the EXEC_OBJECT_PINNED flag is specified this is populated by
+	 * the user with the GTT offset at which this object will be pinned.
+	 *
+	 * When the I915_EXEC_NO_RELOC flag is specified this must contain the
+	 * presumed_offset of the object.
+	 *
+	 * During execbuffer2 the kernel populates it with the value of the
+	 * current GTT offset of the object, for future presumed_offset writes.
+	 *
+	 * See struct drm_i915_gem_create_ext for the rules when dealing with
+	 * alignment restrictions with I915_MEMORY_CLASS_DEVICE, on devices with
+	 * minimum page sizes, like DG2.
+	 */
+	__u64 offset;
+
+#define EXEC_OBJECT_NEEDS_FENCE		 (1<<0)
+#define EXEC_OBJECT_NEEDS_GTT		 (1<<1)
+#define EXEC_OBJECT_WRITE		 (1<<2)
+#define EXEC_OBJECT_SUPPORTS_48B_ADDRESS (1<<3)
+#define EXEC_OBJECT_PINNED		 (1<<4)
+#define EXEC_OBJECT_PAD_TO_SIZE		 (1<<5)
+/* The kernel implicitly tracks GPU activity on all GEM objects, and
+ * synchronises operations with outstanding rendering. This includes
+ * rendering on other devices if exported via dma-buf. However, sometimes
+ * this tracking is too coarse and the user knows better. For example,
+ * if the object is split into non-overlapping ranges shared between different
+ * clients or engines (i.e. suballocating objects), the implicit tracking
+ * by kernel assumes that each operation affects the whole object rather
+ * than an individual range, causing needless synchronisation between clients.
+ * The kernel will also forgo any CPU cache flushes prior to rendering from
+ * the object as the client is expected to be also handling such domain
+ * tracking.
+ *
+ * The kernel maintains the implicit tracking in order to manage resources
+ * used by the GPU - this flag only disables the synchronisation prior to
+ * rendering with this object in this execbuf.
+ *
+ * Opting out of implicit synhronisation requires the user to do its own
+ * explicit tracking to avoid rendering corruption. See, for example,
+ * I915_PARAM_HAS_EXEC_FENCE to order execbufs and execute them asynchronously.
+ */
+#define EXEC_OBJECT_ASYNC		(1<<6)
+/* Request that the contents of this execobject be copied into the error
+ * state upon a GPU hang involving this batch for post-mortem debugging.
+ * These buffers are recorded in no particular order as "user" in
+ * /sys/class/drm/cardN/error. Query I915_PARAM_HAS_EXEC_CAPTURE to see
+ * if the kernel supports this flag.
+ */
+#define EXEC_OBJECT_CAPTURE		(1<<7)
+/* All remaining bits are MBZ and RESERVED FOR FUTURE USE */
+#define __EXEC_OBJECT_UNKNOWN_FLAGS -(EXEC_OBJECT_CAPTURE<<1)
+	__u64 flags;
+
+	union {
+		__u64 rsvd1;
+		__u64 pad_to_size;
+	};
+	__u64 rsvd2;
+};
+
+/**
+ * struct drm_i915_gem_exec_fence - An input or output fence for the execbuf
+ * ioctl.
+ *
+ * The request will wait for input fence to signal before submission.
+ *
+ * The returned output fence will be signaled after the completion of the
+ * request.
+ */
+struct drm_i915_gem_exec_fence {
+	/** @handle: User's handle for a drm_syncobj to wait on or signal. */
+	__u32 handle;
+
+	/**
+	 * @flags: Supported flags are:
+	 *
+	 * I915_EXEC_FENCE_WAIT:
+	 * Wait for the input fence before request submission.
+	 *
+	 * I915_EXEC_FENCE_SIGNAL:
+	 * Return request completion fence as output
+	 */
+	__u32 flags;
+#define I915_EXEC_FENCE_WAIT            (1<<0)
+#define I915_EXEC_FENCE_SIGNAL          (1<<1)
+#define __I915_EXEC_FENCE_UNKNOWN_FLAGS (-(I915_EXEC_FENCE_SIGNAL << 1))
+};
+
+/**
+ * struct drm_i915_gem_execbuffer_ext_timeline_fences - Timeline fences
+ * for execbuf ioctl.
+ *
+ * This structure describes an array of drm_syncobj and associated points for
+ * timeline variants of drm_syncobj. It is invalid to append this structure to
+ * the execbuf if I915_EXEC_FENCE_ARRAY is set.
+ */
+struct drm_i915_gem_execbuffer_ext_timeline_fences {
+#define DRM_I915_GEM_EXECBUFFER_EXT_TIMELINE_FENCES 0
+	/** @base: Extension link. See struct i915_user_extension. */
+	struct i915_user_extension base;
+
+	/**
+	 * @fence_count: Number of elements in the @handles_ptr & @value_ptr
+	 * arrays.
+	 */
+	__u64 fence_count;
+
+	/**
+	 * @handles_ptr: Pointer to an array of struct drm_i915_gem_exec_fence
+	 * of length @fence_count.
+	 */
+	__u64 handles_ptr;
+
+	/**
+	 * @values_ptr: Pointer to an array of u64 values of length
+	 * @fence_count.
+	 * Values must be 0 for a binary drm_syncobj. A Value of 0 for a
+	 * timeline drm_syncobj is invalid as it turns a drm_syncobj into a
+	 * binary one.
+	 */
+	__u64 values_ptr;
+};
+
+/**
+ * struct drm_i915_gem_execbuffer2 - Structure for DRM_I915_GEM_EXECBUFFER2
+ * ioctl.
+ */
+struct drm_i915_gem_execbuffer2 {
+	/** @buffers_ptr: Pointer to a list of gem_exec_object2 structs */
+	__u64 buffers_ptr;
+
+	/** @buffer_count: Number of elements in @buffers_ptr array */
+	__u32 buffer_count;
+
+	/**
+	 * @batch_start_offset: Offset in the batchbuffer to start execution
+	 * from.
+	 */
+	__u32 batch_start_offset;
+
+	/**
+	 * @batch_len: Length in bytes of the batch buffer, starting from the
+	 * @batch_start_offset. If 0, length is assumed to be the batch buffer
+	 * object size.
+	 */
+	__u32 batch_len;
+
+	/** @DR1: deprecated */
+	__u32 DR1;
+
+	/** @DR4: deprecated */
+	__u32 DR4;
+
+	/** @num_cliprects: See @cliprects_ptr */
+	__u32 num_cliprects;
+
+	/**
+	 * @cliprects_ptr: Kernel clipping was a DRI1 misfeature.
+	 *
+	 * It is invalid to use this field if I915_EXEC_FENCE_ARRAY or
+	 * I915_EXEC_USE_EXTENSIONS flags are not set.
+	 *
+	 * If I915_EXEC_FENCE_ARRAY is set, then this is a pointer to an array
+	 * of &drm_i915_gem_exec_fence and @num_cliprects is the length of the
+	 * array.
+	 *
+	 * If I915_EXEC_USE_EXTENSIONS is set, then this is a pointer to a
+	 * single &i915_user_extension and num_cliprects is 0.
+	 */
+	__u64 cliprects_ptr;
+
+	/** @flags: Execbuf flags */
+	__u64 flags;
+#define I915_EXEC_RING_MASK              (0x3f)
+#define I915_EXEC_DEFAULT                (0<<0)
+#define I915_EXEC_RENDER                 (1<<0)
+#define I915_EXEC_BSD                    (2<<0)
+#define I915_EXEC_BLT                    (3<<0)
+#define I915_EXEC_VEBOX                  (4<<0)
+
+/* Used for switching the constants addressing mode on gen4+ RENDER ring.
+ * Gen6+ only supports relative addressing to dynamic state (default) and
+ * absolute addressing.
+ *
+ * These flags are ignored for the BSD and BLT rings.
+ */
+#define I915_EXEC_CONSTANTS_MASK 	(3<<6)
+#define I915_EXEC_CONSTANTS_REL_GENERAL (0<<6) /* default */
+#define I915_EXEC_CONSTANTS_ABSOLUTE 	(1<<6)
+#define I915_EXEC_CONSTANTS_REL_SURFACE (2<<6) /* gen4/5 only */
+
+/** Resets the SO write offset registers for transform feedback on gen7. */
+#define I915_EXEC_GEN7_SOL_RESET	(1<<8)
+
+/** Request a privileged ("secure") batch buffer. Note only available for
+ * DRM_ROOT_ONLY | DRM_MASTER processes.
+ */
+#define I915_EXEC_SECURE		(1<<9)
+
+/** Inform the kernel that the batch is and will always be pinned. This
+ * negates the requirement for a workaround to be performed to avoid
+ * an incoherent CS (such as can be found on 830/845). If this flag is
+ * not passed, the kernel will endeavour to make sure the batch is
+ * coherent with the CS before execution. If this flag is passed,
+ * userspace assumes the responsibility for ensuring the same.
+ */
+#define I915_EXEC_IS_PINNED		(1<<10)
+
+/** Provide a hint to the kernel that the command stream and auxiliary
+ * state buffers already holds the correct presumed addresses and so the
+ * relocation process may be skipped if no buffers need to be moved in
+ * preparation for the execbuffer.
+ */
+#define I915_EXEC_NO_RELOC		(1<<11)
+
+/** Use the reloc.handle as an index into the exec object array rather
+ * than as the per-file handle.
+ */
+#define I915_EXEC_HANDLE_LUT		(1<<12)
+
+/** Used for switching BSD rings on the platforms with two BSD rings */
+#define I915_EXEC_BSD_SHIFT	 (13)
+#define I915_EXEC_BSD_MASK	 (3 << I915_EXEC_BSD_SHIFT)
+/* default ping-pong mode */
+#define I915_EXEC_BSD_DEFAULT	 (0 << I915_EXEC_BSD_SHIFT)
+#define I915_EXEC_BSD_RING1	 (1 << I915_EXEC_BSD_SHIFT)
+#define I915_EXEC_BSD_RING2	 (2 << I915_EXEC_BSD_SHIFT)
+
+/** Tell the kernel that the batchbuffer is processed by
+ *  the resource streamer.
+ */
+#define I915_EXEC_RESOURCE_STREAMER     (1<<15)
+
+/* Setting I915_EXEC_FENCE_IN implies that lower_32_bits(rsvd2) represent
+ * a sync_file fd to wait upon (in a nonblocking manner) prior to executing
+ * the batch.
+ *
+ * Returns -EINVAL if the sync_file fd cannot be found.
+ */
+#define I915_EXEC_FENCE_IN		(1<<16)
+
+/* Setting I915_EXEC_FENCE_OUT causes the ioctl to return a sync_file fd
+ * in the upper_32_bits(rsvd2) upon success. Ownership of the fd is given
+ * to the caller, and it should be close() after use. (The fd is a regular
+ * file descriptor and will be cleaned up on process termination. It holds
+ * a reference to the request, but nothing else.)
+ *
+ * The sync_file fd can be combined with other sync_file and passed either
+ * to execbuf using I915_EXEC_FENCE_IN, to atomic KMS ioctls (so that a flip
+ * will only occur after this request completes), or to other devices.
+ *
+ * Using I915_EXEC_FENCE_OUT requires use of
+ * DRM_IOCTL_I915_GEM_EXECBUFFER2_WR ioctl so that the result is written
+ * back to userspace. Failure to do so will cause the out-fence to always
+ * be reported as zero, and the real fence fd to be leaked.
+ */
+#define I915_EXEC_FENCE_OUT		(1<<17)
+
+/*
+ * Traditionally the execbuf ioctl has only considered the final element in
+ * the execobject[] to be the executable batch. Often though, the client
+ * will known the batch object prior to construction and being able to place
+ * it into the execobject[] array first can simplify the relocation tracking.
+ * Setting I915_EXEC_BATCH_FIRST tells execbuf to use element 0 of the
+ * execobject[] as the * batch instead (the default is to use the last
+ * element).
+ */
+#define I915_EXEC_BATCH_FIRST		(1<<18)
+
+/* Setting I915_FENCE_ARRAY implies that num_cliprects and cliprects_ptr
+ * define an array of i915_gem_exec_fence structures which specify a set of
+ * dma fences to wait upon or signal.
+ */
+#define I915_EXEC_FENCE_ARRAY   (1<<19)
+
+/*
+ * Setting I915_EXEC_FENCE_SUBMIT implies that lower_32_bits(rsvd2) represent
+ * a sync_file fd to wait upon (in a nonblocking manner) prior to executing
+ * the batch.
+ *
+ * Returns -EINVAL if the sync_file fd cannot be found.
+ */
+#define I915_EXEC_FENCE_SUBMIT		(1 << 20)
+
+/*
+ * Setting I915_EXEC_USE_EXTENSIONS implies that
+ * drm_i915_gem_execbuffer2.cliprects_ptr is treated as a pointer to an linked
+ * list of i915_user_extension. Each i915_user_extension node is the base of a
+ * larger structure. The list of supported structures are listed in the
+ * drm_i915_gem_execbuffer_ext enum.
+ */
+#define I915_EXEC_USE_EXTENSIONS	(1 << 21)
+#define __I915_EXEC_UNKNOWN_FLAGS (-(I915_EXEC_USE_EXTENSIONS << 1))
+
+	/** @rsvd1: Context id */
+	__u64 rsvd1;
+
+	/**
+	 * @rsvd2: in and out sync_file file descriptors.
+	 *
+	 * When I915_EXEC_FENCE_IN or I915_EXEC_FENCE_SUBMIT flag is set, the
+	 * lower 32 bits of this field will have the in sync_file fd (input).
+	 *
+	 * When I915_EXEC_FENCE_OUT flag is set, the upper 32 bits of this
+	 * field will have the out sync_file fd (output).
+	 */
+	__u64 rsvd2;
+};
+
+#define I915_EXEC_CONTEXT_ID_MASK	(0xffffffff)
+#define i915_execbuffer2_set_context_id(eb2, context) \
+	(eb2).rsvd1 = context & I915_EXEC_CONTEXT_ID_MASK
+#define i915_execbuffer2_get_context_id(eb2) \
+	((eb2).rsvd1 & I915_EXEC_CONTEXT_ID_MASK)
+
+struct drm_i915_gem_pin {
+	/** Handle of the buffer to be pinned. */
+	__u32 handle;
+	__u32 pad;
+
+	/** alignment required within the aperture */
+	__u64 alignment;
+
+	/** Returned GTT offset of the buffer. */
+	__u64 offset;
+};
+
+struct drm_i915_gem_unpin {
+	/** Handle of the buffer to be unpinned. */
+	__u32 handle;
+	__u32 pad;
+};
+
+struct drm_i915_gem_busy {
+	/** Handle of the buffer to check for busy */
+	__u32 handle;
+
+	/** Return busy status
+	 *
+	 * A return of 0 implies that the object is idle (after
+	 * having flushed any pending activity), and a non-zero return that
+	 * the object is still in-flight on the GPU. (The GPU has not yet
+	 * signaled completion for all pending requests that reference the
+	 * object.) An object is guaranteed to become idle eventually (so
+	 * long as no new GPU commands are executed upon it). Due to the
+	 * asynchronous nature of the hardware, an object reported
+	 * as busy may become idle before the ioctl is completed.
+	 *
+	 * Furthermore, if the object is busy, which engine is busy is only
+	 * provided as a guide and only indirectly by reporting its class
+	 * (there may be more than one engine in each class). There are race
+	 * conditions which prevent the report of which engines are busy from
+	 * being always accurate.  However, the converse is not true. If the
+	 * object is idle, the result of the ioctl, that all engines are idle,
+	 * is accurate.
+	 *
+	 * The returned dword is split into two fields to indicate both
+	 * the engine classes on which the object is being read, and the
+	 * engine class on which it is currently being written (if any).
+	 *
+	 * The low word (bits 0:15) indicate if the object is being written
+	 * to by any engine (there can only be one, as the GEM implicit
+	 * synchronisation rules force writes to be serialised). Only the
+	 * engine class (offset by 1, I915_ENGINE_CLASS_RENDER is reported as
+	 * 1 not 0 etc) for the last write is reported.
+	 *
+	 * The high word (bits 16:31) are a bitmask of which engines classes
+	 * are currently reading from the object. Multiple engines may be
+	 * reading from the object simultaneously.
+	 *
+	 * The value of each engine class is the same as specified in the
+	 * I915_CONTEXT_PARAM_ENGINES context parameter and via perf, i.e.
+	 * I915_ENGINE_CLASS_RENDER, I915_ENGINE_CLASS_COPY, etc.
+	 * Some hardware may have parallel execution engines, e.g. multiple
+	 * media engines, which are mapped to the same class identifier and so
+	 * are not separately reported for busyness.
+	 *
+	 * Caveat emptor:
+	 * Only the boolean result of this query is reliable; that is whether
+	 * the object is idle or busy. The report of which engines are busy
+	 * should be only used as a heuristic.
+	 */
+	__u32 busy;
+};
+
+/**
+ * struct drm_i915_gem_caching - Set or get the caching for given object
+ * handle.
+ *
+ * Allow userspace to control the GTT caching bits for a given object when the
+ * object is later mapped through the ppGTT(or GGTT on older platforms lacking
+ * ppGTT support, or if the object is used for scanout). Note that this might
+ * require unbinding the object from the GTT first, if its current caching value
+ * doesn't match.
+ *
+ * Note that this all changes on discrete platforms, starting from DG1, the
+ * set/get caching is no longer supported, and is now rejected.  Instead the CPU
+ * caching attributes(WB vs WC) will become an immutable creation time property
+ * for the object, along with the GTT caching level. For now we don't expose any
+ * new uAPI for this, instead on DG1 this is all implicit, although this largely
+ * shouldn't matter since DG1 is coherent by default(without any way of
+ * controlling it).
+ *
+ * Implicit caching rules, starting from DG1:
+ *
+ *     - If any of the object placements (see &drm_i915_gem_create_ext_memory_regions)
+ *       contain I915_MEMORY_CLASS_DEVICE then the object will be allocated and
+ *       mapped as write-combined only.
+ *
+ *     - Everything else is always allocated and mapped as write-back, with the
+ *       guarantee that everything is also coherent with the GPU.
+ *
+ * Note that this is likely to change in the future again, where we might need
+ * more flexibility on future devices, so making this all explicit as part of a
+ * new &drm_i915_gem_create_ext extension is probable.
+ *
+ * Side note: Part of the reason for this is that changing the at-allocation-time CPU
+ * caching attributes for the pages might be required(and is expensive) if we
+ * need to then CPU map the pages later with different caching attributes. This
+ * inconsistent caching behaviour, while supported on x86, is not universally
+ * supported on other architectures. So for simplicity we opt for setting
+ * everything at creation time, whilst also making it immutable, on discrete
+ * platforms.
+ */
+struct drm_i915_gem_caching {
+	/**
+	 * @handle: Handle of the buffer to set/get the caching level.
+	 */
+	__u32 handle;
+
+	/**
+	 * @caching: The GTT caching level to apply or possible return value.
+	 *
+	 * The supported @caching values:
+	 *
+	 * I915_CACHING_NONE:
+	 *
+	 * GPU access is not coherent with CPU caches.  Default for machines
+	 * without an LLC. This means manual flushing might be needed, if we
+	 * want GPU access to be coherent.
+	 *
+	 * I915_CACHING_CACHED:
+	 *
+	 * GPU access is coherent with CPU caches and furthermore the data is
+	 * cached in last-level caches shared between CPU cores and the GPU GT.
+	 *
+	 * I915_CACHING_DISPLAY:
+	 *
+	 * Special GPU caching mode which is coherent with the scanout engines.
+	 * Transparently falls back to I915_CACHING_NONE on platforms where no
+	 * special cache mode (like write-through or gfdt flushing) is
+	 * available. The kernel automatically sets this mode when using a
+	 * buffer as a scanout target.  Userspace can manually set this mode to
+	 * avoid a costly stall and clflush in the hotpath of drawing the first
+	 * frame.
+	 */
+#define I915_CACHING_NONE		0
+#define I915_CACHING_CACHED		1
+#define I915_CACHING_DISPLAY		2
+	__u32 caching;
+};
+
+#define I915_TILING_NONE	0
+#define I915_TILING_X		1
+#define I915_TILING_Y		2
+/*
+ * Do not add new tiling types here.  The I915_TILING_* values are for
+ * de-tiling fence registers that no longer exist on modern platforms.  Although
+ * the hardware may support new types of tiling in general (e.g., Tile4), we
+ * do not need to add them to the uapi that is specific to now-defunct ioctls.
+ */
+#define I915_TILING_LAST	I915_TILING_Y
+
+#define I915_BIT_6_SWIZZLE_NONE		0
+#define I915_BIT_6_SWIZZLE_9		1
+#define I915_BIT_6_SWIZZLE_9_10		2
+#define I915_BIT_6_SWIZZLE_9_11		3
+#define I915_BIT_6_SWIZZLE_9_10_11	4
+/* Not seen by userland */
+#define I915_BIT_6_SWIZZLE_UNKNOWN	5
+/* Seen by userland. */
+#define I915_BIT_6_SWIZZLE_9_17		6
+#define I915_BIT_6_SWIZZLE_9_10_17	7
+
+struct drm_i915_gem_set_tiling {
+	/** Handle of the buffer to have its tiling state updated */
+	__u32 handle;
+
+	/**
+	 * Tiling mode for the object (I915_TILING_NONE, I915_TILING_X,
+	 * I915_TILING_Y).
+	 *
+	 * This value is to be set on request, and will be updated by the
+	 * kernel on successful return with the actual chosen tiling layout.
+	 *
+	 * The tiling mode may be demoted to I915_TILING_NONE when the system
+	 * has bit 6 swizzling that can't be managed correctly by GEM.
+	 *
+	 * Buffer contents become undefined when changing tiling_mode.
+	 */
+	__u32 tiling_mode;
+
+	/**
+	 * Stride in bytes for the object when in I915_TILING_X or
+	 * I915_TILING_Y.
+	 */
+	__u32 stride;
+
+	/**
+	 * Returned address bit 6 swizzling required for CPU access through
+	 * mmap mapping.
+	 */
+	__u32 swizzle_mode;
+};
+
+struct drm_i915_gem_get_tiling {
+	/** Handle of the buffer to get tiling state for. */
+	__u32 handle;
+
+	/**
+	 * Current tiling mode for the object (I915_TILING_NONE, I915_TILING_X,
+	 * I915_TILING_Y).
+	 */
+	__u32 tiling_mode;
+
+	/**
+	 * Returned address bit 6 swizzling required for CPU access through
+	 * mmap mapping.
+	 */
+	__u32 swizzle_mode;
+
+	/**
+	 * Returned address bit 6 swizzling required for CPU access through
+	 * mmap mapping whilst bound.
+	 */
+	__u32 phys_swizzle_mode;
+};
+
+struct drm_i915_gem_get_aperture {
+	/** Total size of the aperture used by i915_gem_execbuffer, in bytes */
+	__u64 aper_size;
+
+	/**
+	 * Available space in the aperture used by i915_gem_execbuffer, in
+	 * bytes
+	 */
+	__u64 aper_available_size;
+};
+
+struct drm_i915_get_pipe_from_crtc_id {
+	/** ID of CRTC being requested **/
+	__u32 crtc_id;
+
+	/** pipe of requested CRTC **/
+	__u32 pipe;
+};
+
+#define I915_MADV_WILLNEED 0
+#define I915_MADV_DONTNEED 1
+#define __I915_MADV_PURGED 2 /* internal state */
+
+struct drm_i915_gem_madvise {
+	/** Handle of the buffer to change the backing store advice */
+	__u32 handle;
+
+	/* Advice: either the buffer will be needed again in the near future,
+	 *         or won't be and could be discarded under memory pressure.
+	 */
+	__u32 madv;
+
+	/** Whether the backing store still exists. */
+	__u32 retained;
+};
+
+/* flags */
+#define I915_OVERLAY_TYPE_MASK 		0xff
+#define I915_OVERLAY_YUV_PLANAR 	0x01
+#define I915_OVERLAY_YUV_PACKED 	0x02
+#define I915_OVERLAY_RGB		0x03
+
+#define I915_OVERLAY_DEPTH_MASK		0xff00
+#define I915_OVERLAY_RGB24		0x1000
+#define I915_OVERLAY_RGB16		0x2000
+#define I915_OVERLAY_RGB15		0x3000
+#define I915_OVERLAY_YUV422		0x0100
+#define I915_OVERLAY_YUV411		0x0200
+#define I915_OVERLAY_YUV420		0x0300
+#define I915_OVERLAY_YUV410		0x0400
+
+#define I915_OVERLAY_SWAP_MASK		0xff0000
+#define I915_OVERLAY_NO_SWAP		0x000000
+#define I915_OVERLAY_UV_SWAP		0x010000
+#define I915_OVERLAY_Y_SWAP		0x020000
+#define I915_OVERLAY_Y_AND_UV_SWAP	0x030000
+
+#define I915_OVERLAY_FLAGS_MASK		0xff000000
+#define I915_OVERLAY_ENABLE		0x01000000
+
+struct drm_intel_overlay_put_image {
+	/* various flags and src format description */
+	__u32 flags;
+	/* source picture description */
+	__u32 bo_handle;
+	/* stride values and offsets are in bytes, buffer relative */
+	__u16 stride_Y; /* stride for packed formats */
+	__u16 stride_UV;
+	__u32 offset_Y; /* offset for packet formats */
+	__u32 offset_U;
+	__u32 offset_V;
+	/* in pixels */
+	__u16 src_width;
+	__u16 src_height;
+	/* to compensate the scaling factors for partially covered surfaces */
+	__u16 src_scan_width;
+	__u16 src_scan_height;
+	/* output crtc description */
+	__u32 crtc_id;
+	__u16 dst_x;
+	__u16 dst_y;
+	__u16 dst_width;
+	__u16 dst_height;
+};
+
+/* flags */
+#define I915_OVERLAY_UPDATE_ATTRS	(1<<0)
+#define I915_OVERLAY_UPDATE_GAMMA	(1<<1)
+#define I915_OVERLAY_DISABLE_DEST_COLORKEY	(1<<2)
+struct drm_intel_overlay_attrs {
+	__u32 flags;
+	__u32 color_key;
+	__s32 brightness;
+	__u32 contrast;
+	__u32 saturation;
+	__u32 gamma0;
+	__u32 gamma1;
+	__u32 gamma2;
+	__u32 gamma3;
+	__u32 gamma4;
+	__u32 gamma5;
+};
+
+/*
+ * Intel sprite handling
+ *
+ * Color keying works with a min/mask/max tuple.  Both source and destination
+ * color keying is allowed.
+ *
+ * Source keying:
+ * Sprite pixels within the min & max values, masked against the color channels
+ * specified in the mask field, will be transparent.  All other pixels will
+ * be displayed on top of the primary plane.  For RGB surfaces, only the min
+ * and mask fields will be used; ranged compares are not allowed.
+ *
+ * Destination keying:
+ * Primary plane pixels that match the min value, masked against the color
+ * channels specified in the mask field, will be replaced by corresponding
+ * pixels from the sprite plane.
+ *
+ * Note that source & destination keying are exclusive; only one can be
+ * active on a given plane.
+ */
+
+#define I915_SET_COLORKEY_NONE		(1<<0) /* Deprecated. Instead set
+						* flags==0 to disable colorkeying.
+						*/
+#define I915_SET_COLORKEY_DESTINATION	(1<<1)
+#define I915_SET_COLORKEY_SOURCE	(1<<2)
+struct drm_intel_sprite_colorkey {
+	__u32 plane_id;
+	__u32 min_value;
+	__u32 channel_mask;
+	__u32 max_value;
+	__u32 flags;
+};
+
+struct drm_i915_gem_wait {
+	/** Handle of BO we shall wait on */
+	__u32 bo_handle;
+	__u32 flags;
+	/** Number of nanoseconds to wait, Returns time remaining. */
+	__s64 timeout_ns;
+};
+
+struct drm_i915_gem_context_create {
+	__u32 ctx_id; /* output: id of new context*/
+	__u32 pad;
+};
+
+/**
+ * struct drm_i915_gem_context_create_ext - Structure for creating contexts.
+ */
+struct drm_i915_gem_context_create_ext {
+	/** @ctx_id: Id of the created context (output) */
+	__u32 ctx_id;
+
+	/**
+	 * @flags: Supported flags are:
+	 *
+	 * I915_CONTEXT_CREATE_FLAGS_USE_EXTENSIONS:
+	 *
+	 * Extensions may be appended to this structure and driver must check
+	 * for those. See @extensions.
+	 *
+	 * I915_CONTEXT_CREATE_FLAGS_SINGLE_TIMELINE
+	 *
+	 * Created context will have single timeline.
+	 */
+	__u32 flags;
+#define I915_CONTEXT_CREATE_FLAGS_USE_EXTENSIONS	(1u << 0)
+#define I915_CONTEXT_CREATE_FLAGS_SINGLE_TIMELINE	(1u << 1)
+#define I915_CONTEXT_CREATE_FLAGS_UNKNOWN \
+	(-(I915_CONTEXT_CREATE_FLAGS_SINGLE_TIMELINE << 1))
+
+	/**
+	 * @extensions: Zero-terminated chain of extensions.
+	 *
+	 * I915_CONTEXT_CREATE_EXT_SETPARAM:
+	 * Context parameter to set or query during context creation.
+	 * See struct drm_i915_gem_context_create_ext_setparam.
+	 *
+	 * I915_CONTEXT_CREATE_EXT_CLONE:
+	 * This extension has been removed. On the off chance someone somewhere
+	 * has attempted to use it, never re-use this extension number.
+	 */
+	__u64 extensions;
+#define I915_CONTEXT_CREATE_EXT_SETPARAM 0
+#define I915_CONTEXT_CREATE_EXT_CLONE 1
+};
+
+/**
+ * struct drm_i915_gem_context_param - Context parameter to set or query.
+ */
+struct drm_i915_gem_context_param {
+	/** @ctx_id: Context id */
+	__u32 ctx_id;
+
+	/** @size: Size of the parameter @value */
+	__u32 size;
+
+	/** @param: Parameter to set or query */
+	__u64 param;
+#define I915_CONTEXT_PARAM_BAN_PERIOD	0x1
+/* I915_CONTEXT_PARAM_NO_ZEROMAP has been removed.  On the off chance
+ * someone somewhere has attempted to use it, never re-use this context
+ * param number.
+ */
+#define I915_CONTEXT_PARAM_NO_ZEROMAP	0x2
+#define I915_CONTEXT_PARAM_GTT_SIZE	0x3
+#define I915_CONTEXT_PARAM_NO_ERROR_CAPTURE	0x4
+#define I915_CONTEXT_PARAM_BANNABLE	0x5
+#define I915_CONTEXT_PARAM_PRIORITY	0x6
+#define   I915_CONTEXT_MAX_USER_PRIORITY	1023 /* inclusive */
+#define   I915_CONTEXT_DEFAULT_PRIORITY		0
+#define   I915_CONTEXT_MIN_USER_PRIORITY	-1023 /* inclusive */
+	/*
+	 * When using the following param, value should be a pointer to
+	 * drm_i915_gem_context_param_sseu.
+	 */
+#define I915_CONTEXT_PARAM_SSEU		0x7
+
+/*
+ * Not all clients may want to attempt automatic recover of a context after
+ * a hang (for example, some clients may only submit very small incremental
+ * batches relying on known logical state of previous batches which will never
+ * recover correctly and each attempt will hang), and so would prefer that
+ * the context is forever banned instead.
+ *
+ * If set to false (0), after a reset, subsequent (and in flight) rendering
+ * from this context is discarded, and the client will need to create a new
+ * context to use instead.
+ *
+ * If set to true (1), the kernel will automatically attempt to recover the
+ * context by skipping the hanging batch and executing the next batch starting
+ * from the default context state (discarding the incomplete logical context
+ * state lost due to the reset).
+ *
+ * On creation, all new contexts are marked as recoverable.
+ */
+#define I915_CONTEXT_PARAM_RECOVERABLE	0x8
+
+	/*
+	 * The id of the associated virtual memory address space (ppGTT) of
+	 * this context. Can be retrieved and passed to another context
+	 * (on the same fd) for both to use the same ppGTT and so share
+	 * address layouts, and avoid reloading the page tables on context
+	 * switches between themselves.
+	 *
+	 * See DRM_I915_GEM_VM_CREATE and DRM_I915_GEM_VM_DESTROY.
+	 */
+#define I915_CONTEXT_PARAM_VM		0x9
+
+/*
+ * I915_CONTEXT_PARAM_ENGINES:
+ *
+ * Bind this context to operate on this subset of available engines. Henceforth,
+ * the I915_EXEC_RING selector for DRM_IOCTL_I915_GEM_EXECBUFFER2 operates as
+ * an index into this array of engines; I915_EXEC_DEFAULT selecting engine[0]
+ * and upwards. Slots 0...N are filled in using the specified (class, instance).
+ * Use
+ *	engine_class: I915_ENGINE_CLASS_INVALID,
+ *	engine_instance: I915_ENGINE_CLASS_INVALID_NONE
+ * to specify a gap in the array that can be filled in later, e.g. by a
+ * virtual engine used for load balancing.
+ *
+ * Setting the number of engines bound to the context to 0, by passing a zero
+ * sized argument, will revert back to default settings.
+ *
+ * See struct i915_context_param_engines.
+ *
+ * Extensions:
+ *   i915_context_engines_load_balance (I915_CONTEXT_ENGINES_EXT_LOAD_BALANCE)
+ *   i915_context_engines_bond (I915_CONTEXT_ENGINES_EXT_BOND)
+ *   i915_context_engines_parallel_submit (I915_CONTEXT_ENGINES_EXT_PARALLEL_SUBMIT)
+ */
+#define I915_CONTEXT_PARAM_ENGINES	0xa
+
+/*
+ * I915_CONTEXT_PARAM_PERSISTENCE:
+ *
+ * Allow the context and active rendering to survive the process until
+ * completion. Persistence allows fire-and-forget clients to queue up a
+ * bunch of work, hand the output over to a display server and then quit.
+ * If the context is marked as not persistent, upon closing (either via
+ * an explicit DRM_I915_GEM_CONTEXT_DESTROY or implicitly from file closure
+ * or process termination), the context and any outstanding requests will be
+ * cancelled (and exported fences for cancelled requests marked as -EIO).
+ *
+ * By default, new contexts allow persistence.
+ */
+#define I915_CONTEXT_PARAM_PERSISTENCE	0xb
+
+/* This API has been removed.  On the off chance someone somewhere has
+ * attempted to use it, never re-use this context param number.
+ */
+#define I915_CONTEXT_PARAM_RINGSIZE	0xc
+
+/*
+ * I915_CONTEXT_PARAM_PROTECTED_CONTENT:
+ *
+ * Mark that the context makes use of protected content, which will result
+ * in the context being invalidated when the protected content session is.
+ * Given that the protected content session is killed on suspend, the device
+ * is kept awake for the lifetime of a protected context, so the user should
+ * make sure to dispose of them once done.
+ * This flag can only be set at context creation time and, when set to true,
+ * must be preceded by an explicit setting of I915_CONTEXT_PARAM_RECOVERABLE
+ * to false. This flag can't be set to true in conjunction with setting the
+ * I915_CONTEXT_PARAM_BANNABLE flag to false. Creation example:
+ *
+ * .. code-block:: C
+ *
+ *	struct drm_i915_gem_context_create_ext_setparam p_protected = {
+ *		.base = {
+ *			.name = I915_CONTEXT_CREATE_EXT_SETPARAM,
+ *		},
+ *		.param = {
+ *			.param = I915_CONTEXT_PARAM_PROTECTED_CONTENT,
+ *			.value = 1,
+ *		}
+ *	};
+ *	struct drm_i915_gem_context_create_ext_setparam p_norecover = {
+ *		.base = {
+ *			.name = I915_CONTEXT_CREATE_EXT_SETPARAM,
+ *			.next_extension = to_user_pointer(&p_protected),
+ *		},
+ *		.param = {
+ *			.param = I915_CONTEXT_PARAM_RECOVERABLE,
+ *			.value = 0,
+ *		}
+ *	};
+ *	struct drm_i915_gem_context_create_ext create = {
+ *		.flags = I915_CONTEXT_CREATE_FLAGS_USE_EXTENSIONS,
+ *		.extensions = to_user_pointer(&p_norecover);
+ *	};
+ *
+ *	ctx_id = gem_context_create_ext(drm_fd, &create);
+ *
+ * In addition to the normal failure cases, setting this flag during context
+ * creation can result in the following errors:
+ *
+ * -ENODEV: feature not available
+ * -EPERM: trying to mark a recoverable or not bannable context as protected
+ * -ENXIO: A dependency such as a component driver or firmware is not yet
+ *         loaded so user space may need to attempt again. Depending on the
+ *         device, this error may be reported if protected context creation is
+ *         attempted very early after kernel start because the internal timeout
+ *         waiting for such dependencies is not guaranteed to be larger than
+ *         required (numbers differ depending on system and kernel config):
+ *            - ADL/RPL: dependencies may take up to 3 seconds from kernel start
+ *                       while context creation internal timeout is 250 milisecs
+ *            - MTL: dependencies may take up to 8 seconds from kernel start
+ *                   while context creation internal timeout is 250 milisecs
+ *         NOTE: such dependencies happen once, so a subsequent call to create a
+ *         protected context after a prior successful call will not experience
+ *         such timeouts and will not return -ENXIO (unless the driver is reloaded,
+ *         or, depending on the device, resumes from a suspended state).
+ * -EIO: The firmware did not succeed in creating the protected context.
+ */
+#define I915_CONTEXT_PARAM_PROTECTED_CONTENT    0xd
+
+/*
+ * I915_CONTEXT_PARAM_LOW_LATENCY:
+ *
+ * Mark this context as a low latency workload which requires aggressive GT
+ * frequency scaling. Use I915_PARAM_HAS_CONTEXT_FREQ_HINT to check if the kernel
+ * supports this per context flag.
+ */
+#define I915_CONTEXT_PARAM_LOW_LATENCY		0xe
+
+/*
+ * I915_CONTEXT_PARAM_CONTEXT_IMAGE:
+ *
+ * Allows userspace to provide own context images.
+ *
+ * Note that this is a debug API not available on production kernel builds.
+ */
+#define I915_CONTEXT_PARAM_CONTEXT_IMAGE	0xf
+/* Must be kept compact -- no holes and well documented */
+
+	/** @value: Context parameter value to be set or queried */
+	__u64 value;
+};
+
+/*
+ * Context SSEU programming
+ *
+ * It may be necessary for either functional or performance reason to configure
+ * a context to run with a reduced number of SSEU (where SSEU stands for Slice/
+ * Sub-slice/EU).
+ *
+ * This is done by configuring SSEU configuration using the below
+ * @struct drm_i915_gem_context_param_sseu for every supported engine which
+ * userspace intends to use.
+ *
+ * Not all GPUs or engines support this functionality in which case an error
+ * code -ENODEV will be returned.
+ *
+ * Also, flexibility of possible SSEU configuration permutations varies between
+ * GPU generations and software imposed limitations. Requesting such a
+ * combination will return an error code of -EINVAL.
+ *
+ * NOTE: When perf/OA is active the context's SSEU configuration is ignored in
+ * favour of a single global setting.
+ */
+struct drm_i915_gem_context_param_sseu {
+	/*
+	 * Engine class & instance to be configured or queried.
+	 */
+	struct i915_engine_class_instance engine;
+
+	/*
+	 * Unknown flags must be cleared to zero.
+	 */
+	__u32 flags;
+#define I915_CONTEXT_SSEU_FLAG_ENGINE_INDEX (1u << 0)
+
+	/*
+	 * Mask of slices to enable for the context. Valid values are a subset
+	 * of the bitmask value returned for I915_PARAM_SLICE_MASK.
+	 */
+	__u64 slice_mask;
+
+	/*
+	 * Mask of subslices to enable for the context. Valid values are a
+	 * subset of the bitmask value return by I915_PARAM_SUBSLICE_MASK.
+	 */
+	__u64 subslice_mask;
+
+	/*
+	 * Minimum/Maximum number of EUs to enable per subslice for the
+	 * context. min_eus_per_subslice must be inferior or equal to
+	 * max_eus_per_subslice.
+	 */
+	__u16 min_eus_per_subslice;
+	__u16 max_eus_per_subslice;
+
+	/*
+	 * Unused for now. Must be cleared to zero.
+	 */
+	__u32 rsvd;
+};
+
+/**
+ * DOC: Virtual Engine uAPI
+ *
+ * Virtual engine is a concept where userspace is able to configure a set of
+ * physical engines, submit a batch buffer, and let the driver execute it on any
+ * engine from the set as it sees fit.
+ *
+ * This is primarily useful on parts which have multiple instances of a same
+ * class engine, like for example GT3+ Skylake parts with their two VCS engines.
+ *
+ * For instance userspace can enumerate all engines of a certain class using the
+ * previously described `Engine Discovery uAPI`_. After that userspace can
+ * create a GEM context with a placeholder slot for the virtual engine (using
+ * `I915_ENGINE_CLASS_INVALID` and `I915_ENGINE_CLASS_INVALID_NONE` for class
+ * and instance respectively) and finally using the
+ * `I915_CONTEXT_ENGINES_EXT_LOAD_BALANCE` extension place a virtual engine in
+ * the same reserved slot.
+ *
+ * Example of creating a virtual engine and submitting a batch buffer to it:
+ *
+ * .. code-block:: C
+ *
+ * 	I915_DEFINE_CONTEXT_ENGINES_LOAD_BALANCE(virtual, 2) = {
+ * 		.base.name = I915_CONTEXT_ENGINES_EXT_LOAD_BALANCE,
+ * 		.engine_index = 0, // Place this virtual engine into engine map slot 0
+ * 		.num_siblings = 2,
+ * 		.engines = { { I915_ENGINE_CLASS_VIDEO, 0 },
+ * 			     { I915_ENGINE_CLASS_VIDEO, 1 }, },
+ * 	};
+ * 	I915_DEFINE_CONTEXT_PARAM_ENGINES(engines, 1) = {
+ * 		.engines = { { I915_ENGINE_CLASS_INVALID,
+ * 			       I915_ENGINE_CLASS_INVALID_NONE } },
+ * 		.extensions = to_user_pointer(&virtual), // Chains after load_balance extension
+ * 	};
+ * 	struct drm_i915_gem_context_create_ext_setparam p_engines = {
+ * 		.base = {
+ * 			.name = I915_CONTEXT_CREATE_EXT_SETPARAM,
+ * 		},
+ * 		.param = {
+ * 			.param = I915_CONTEXT_PARAM_ENGINES,
+ * 			.value = to_user_pointer(&engines),
+ * 			.size = sizeof(engines),
+ * 		},
+ * 	};
+ * 	struct drm_i915_gem_context_create_ext create = {
+ * 		.flags = I915_CONTEXT_CREATE_FLAGS_USE_EXTENSIONS,
+ * 		.extensions = to_user_pointer(&p_engines);
+ * 	};
+ *
+ * 	ctx_id = gem_context_create_ext(drm_fd, &create);
+ *
+ * 	// Now we have created a GEM context with its engine map containing a
+ * 	// single virtual engine. Submissions to this slot can go either to
+ * 	// vcs0 or vcs1, depending on the load balancing algorithm used inside
+ * 	// the driver. The load balancing is dynamic from one batch buffer to
+ * 	// another and transparent to userspace.
+ *
+ * 	...
+ * 	execbuf.rsvd1 = ctx_id;
+ * 	execbuf.flags = 0; // Submits to index 0 which is the virtual engine
+ * 	gem_execbuf(drm_fd, &execbuf);
+ */
+
+/*
+ * i915_context_engines_load_balance:
+ *
+ * Enable load balancing across this set of engines.
+ *
+ * Into the I915_EXEC_DEFAULT slot [0], a virtual engine is created that when
+ * used will proxy the execbuffer request onto one of the set of engines
+ * in such a way as to distribute the load evenly across the set.
+ *
+ * The set of engines must be compatible (e.g. the same HW class) as they
+ * will share the same logical GPU context and ring.
+ *
+ * To intermix rendering with the virtual engine and direct rendering onto
+ * the backing engines (bypassing the load balancing proxy), the context must
+ * be defined to use a single timeline for all engines.
+ */
+struct i915_context_engines_load_balance {
+	struct i915_user_extension base;
+
+	__u16 engine_index;
+	__u16 num_siblings;
+	__u32 flags; /* all undefined flags must be zero */
+
+	__u64 mbz64; /* reserved for future use; must be zero */
+
+	struct i915_engine_class_instance engines[];
+} __attribute__((packed));
+
+#define I915_DEFINE_CONTEXT_ENGINES_LOAD_BALANCE(name__, N__) struct { \
+	struct i915_user_extension base; \
+	__u16 engine_index; \
+	__u16 num_siblings; \
+	__u32 flags; \
+	__u64 mbz64; \
+	struct i915_engine_class_instance engines[N__]; \
+} __attribute__((packed)) name__
+
+/*
+ * i915_context_engines_bond:
+ *
+ * Constructed bonded pairs for execution within a virtual engine.
+ *
+ * All engines are equal, but some are more equal than others. Given
+ * the distribution of resources in the HW, it may be preferable to run
+ * a request on a given subset of engines in parallel to a request on a
+ * specific engine. We enable this selection of engines within a virtual
+ * engine by specifying bonding pairs, for any given master engine we will
+ * only execute on one of the corresponding siblings within the virtual engine.
+ *
+ * To execute a request in parallel on the master engine and a sibling requires
+ * coordination with a I915_EXEC_FENCE_SUBMIT.
+ */
+struct i915_context_engines_bond {
+	struct i915_user_extension base;
+
+	struct i915_engine_class_instance master;
+
+	__u16 virtual_index; /* index of virtual engine in ctx->engines[] */
+	__u16 num_bonds;
+
+	__u64 flags; /* all undefined flags must be zero */
+	__u64 mbz64[4]; /* reserved for future use; must be zero */
+
+	struct i915_engine_class_instance engines[];
+} __attribute__((packed));
+
+#define I915_DEFINE_CONTEXT_ENGINES_BOND(name__, N__) struct { \
+	struct i915_user_extension base; \
+	struct i915_engine_class_instance master; \
+	__u16 virtual_index; \
+	__u16 num_bonds; \
+	__u64 flags; \
+	__u64 mbz64[4]; \
+	struct i915_engine_class_instance engines[N__]; \
+} __attribute__((packed)) name__
+
+/**
+ * struct i915_context_engines_parallel_submit - Configure engine for
+ * parallel submission.
+ *
+ * Setup a slot in the context engine map to allow multiple BBs to be submitted
+ * in a single execbuf IOCTL. Those BBs will then be scheduled to run on the GPU
+ * in parallel. Multiple hardware contexts are created internally in the i915 to
+ * run these BBs. Once a slot is configured for N BBs only N BBs can be
+ * submitted in each execbuf IOCTL and this is implicit behavior e.g. The user
+ * doesn't tell the execbuf IOCTL there are N BBs, the execbuf IOCTL knows how
+ * many BBs there are based on the slot's configuration. The N BBs are the last
+ * N buffer objects or first N if I915_EXEC_BATCH_FIRST is set.
+ *
+ * The default placement behavior is to create implicit bonds between each
+ * context if each context maps to more than 1 physical engine (e.g. context is
+ * a virtual engine). Also we only allow contexts of same engine class and these
+ * contexts must be in logically contiguous order. Examples of the placement
+ * behavior are described below. Lastly, the default is to not allow BBs to be
+ * preempted mid-batch. Rather insert coordinated preemption points on all
+ * hardware contexts between each set of BBs. Flags could be added in the future
+ * to change both of these default behaviors.
+ *
+ * Returns -EINVAL if hardware context placement configuration is invalid or if
+ * the placement configuration isn't supported on the platform / submission
+ * interface.
+ * Returns -ENODEV if extension isn't supported on the platform / submission
+ * interface.
+ *
+ * .. code-block:: none
+ *
+ *	Examples syntax:
+ *	CS[X] = generic engine of same class, logical instance X
+ *	INVALID = I915_ENGINE_CLASS_INVALID, I915_ENGINE_CLASS_INVALID_NONE
+ *
+ *	Example 1 pseudo code:
+ *	set_engines(INVALID)
+ *	set_parallel(engine_index=0, width=2, num_siblings=1,
+ *		     engines=CS[0],CS[1])
+ *
+ *	Results in the following valid placement:
+ *	CS[0], CS[1]
+ *
+ *	Example 2 pseudo code:
+ *	set_engines(INVALID)
+ *	set_parallel(engine_index=0, width=2, num_siblings=2,
+ *		     engines=CS[0],CS[2],CS[1],CS[3])
+ *
+ *	Results in the following valid placements:
+ *	CS[0], CS[1]
+ *	CS[2], CS[3]
+ *
+ *	This can be thought of as two virtual engines, each containing two
+ *	engines thereby making a 2D array. However, there are bonds tying the
+ *	entries together and placing restrictions on how they can be scheduled.
+ *	Specifically, the scheduler can choose only vertical columns from the 2D
+ *	array. That is, CS[0] is bonded to CS[1] and CS[2] to CS[3]. So if the
+ *	scheduler wants to submit to CS[0], it must also choose CS[1] and vice
+ *	versa. Same for CS[2] requires also using CS[3].
+ *	VE[0] = CS[0], CS[2]
+ *	VE[1] = CS[1], CS[3]
+ *
+ *	Example 3 pseudo code:
+ *	set_engines(INVALID)
+ *	set_parallel(engine_index=0, width=2, num_siblings=2,
+ *		     engines=CS[0],CS[1],CS[1],CS[3])
+ *
+ *	Results in the following valid and invalid placements:
+ *	CS[0], CS[1]
+ *	CS[1], CS[3] - Not logically contiguous, return -EINVAL
+ */
+struct i915_context_engines_parallel_submit {
+	/**
+	 * @base: base user extension.
+	 */
+	struct i915_user_extension base;
+
+	/**
+	 * @engine_index: slot for parallel engine
+	 */
+	__u16 engine_index;
+
+	/**
+	 * @width: number of contexts per parallel engine or in other words the
+	 * number of batches in each submission
+	 */
+	__u16 width;
+
+	/**
+	 * @num_siblings: number of siblings per context or in other words the
+	 * number of possible placements for each submission
+	 */
+	__u16 num_siblings;
+
+	/**
+	 * @mbz16: reserved for future use; must be zero
+	 */
+	__u16 mbz16;
+
+	/**
+	 * @flags: all undefined flags must be zero, currently not defined flags
+	 */
+	__u64 flags;
+
+	/**
+	 * @mbz64: reserved for future use; must be zero
+	 */
+	__u64 mbz64[3];
+
+	/**
+	 * @engines: 2-d array of engine instances to configure parallel engine
+	 *
+	 * length = width (i) * num_siblings (j)
+	 * index = j + i * num_siblings
+	 */
+	struct i915_engine_class_instance engines[];
+
+} __packed;
+
+#define I915_DEFINE_CONTEXT_ENGINES_PARALLEL_SUBMIT(name__, N__) struct { \
+	struct i915_user_extension base; \
+	__u16 engine_index; \
+	__u16 width; \
+	__u16 num_siblings; \
+	__u16 mbz16; \
+	__u64 flags; \
+	__u64 mbz64[3]; \
+	struct i915_engine_class_instance engines[N__]; \
+} __attribute__((packed)) name__
+
+/**
+ * DOC: Context Engine Map uAPI
+ *
+ * Context engine map is a new way of addressing engines when submitting batch-
+ * buffers, replacing the existing way of using identifiers like `I915_EXEC_BLT`
+ * inside the flags field of `struct drm_i915_gem_execbuffer2`.
+ *
+ * To use it created GEM contexts need to be configured with a list of engines
+ * the user is intending to submit to. This is accomplished using the
+ * `I915_CONTEXT_PARAM_ENGINES` parameter and `struct
+ * i915_context_param_engines`.
+ *
+ * For such contexts the `I915_EXEC_RING_MASK` field becomes an index into the
+ * configured map.
+ *
+ * Example of creating such context and submitting against it:
+ *
+ * .. code-block:: C
+ *
+ * 	I915_DEFINE_CONTEXT_PARAM_ENGINES(engines, 2) = {
+ * 		.engines = { { I915_ENGINE_CLASS_RENDER, 0 },
+ * 			     { I915_ENGINE_CLASS_COPY, 0 } }
+ * 	};
+ * 	struct drm_i915_gem_context_create_ext_setparam p_engines = {
+ * 		.base = {
+ * 			.name = I915_CONTEXT_CREATE_EXT_SETPARAM,
+ * 		},
+ * 		.param = {
+ * 			.param = I915_CONTEXT_PARAM_ENGINES,
+ * 			.value = to_user_pointer(&engines),
+ * 			.size = sizeof(engines),
+ * 		},
+ * 	};
+ * 	struct drm_i915_gem_context_create_ext create = {
+ * 		.flags = I915_CONTEXT_CREATE_FLAGS_USE_EXTENSIONS,
+ * 		.extensions = to_user_pointer(&p_engines);
+ * 	};
+ *
+ * 	ctx_id = gem_context_create_ext(drm_fd, &create);
+ *
+ * 	// We have now created a GEM context with two engines in the map:
+ * 	// Index 0 points to rcs0 while index 1 points to bcs0. Other engines
+ * 	// will not be accessible from this context.
+ *
+ * 	...
+ * 	execbuf.rsvd1 = ctx_id;
+ * 	execbuf.flags = 0; // Submits to index 0, which is rcs0 for this context
+ * 	gem_execbuf(drm_fd, &execbuf);
+ *
+ * 	...
+ * 	execbuf.rsvd1 = ctx_id;
+ * 	execbuf.flags = 1; // Submits to index 0, which is bcs0 for this context
+ * 	gem_execbuf(drm_fd, &execbuf);
+ */
+
+struct i915_context_param_engines {
+	__u64 extensions; /* linked chain of extension blocks, 0 terminates */
+#define I915_CONTEXT_ENGINES_EXT_LOAD_BALANCE 0 /* see i915_context_engines_load_balance */
+#define I915_CONTEXT_ENGINES_EXT_BOND 1 /* see i915_context_engines_bond */
+#define I915_CONTEXT_ENGINES_EXT_PARALLEL_SUBMIT 2 /* see i915_context_engines_parallel_submit */
+	struct i915_engine_class_instance engines[];
+} __attribute__((packed));
+
+#define I915_DEFINE_CONTEXT_PARAM_ENGINES(name__, N__) struct { \
+	__u64 extensions; \
+	struct i915_engine_class_instance engines[N__]; \
+} __attribute__((packed)) name__
+
+struct i915_gem_context_param_context_image {
+	/** @engine: Engine class & instance to be configured. */
+	struct i915_engine_class_instance engine;
+
+	/** @flags: One of the supported flags or zero. */
+	__u32 flags;
+#define I915_CONTEXT_IMAGE_FLAG_ENGINE_INDEX (1u << 0)
+
+	/** @size: Size of the image blob pointed to by @image. */
+	__u32 size;
+
+	/** @mbz: Must be zero. */
+	__u32 mbz;
+
+	/** @image: Userspace memory containing the context image. */
+	__u64 image;
+} __attribute__((packed));
+
+/**
+ * struct drm_i915_gem_context_create_ext_setparam - Context parameter
+ * to set or query during context creation.
+ */
+struct drm_i915_gem_context_create_ext_setparam {
+	/** @base: Extension link. See struct i915_user_extension. */
+	struct i915_user_extension base;
+
+	/**
+	 * @param: Context parameter to set or query.
+	 * See struct drm_i915_gem_context_param.
+	 */
+	struct drm_i915_gem_context_param param;
+};
+
+struct drm_i915_gem_context_destroy {
+	__u32 ctx_id;
+	__u32 pad;
+};
+
+/**
+ * struct drm_i915_gem_vm_control - Structure to create or destroy VM.
+ *
+ * DRM_I915_GEM_VM_CREATE -
+ *
+ * Create a new virtual memory address space (ppGTT) for use within a context
+ * on the same file. Extensions can be provided to configure exactly how the
+ * address space is setup upon creation.
+ *
+ * The id of new VM (bound to the fd) for use with I915_CONTEXT_PARAM_VM is
+ * returned in the outparam @id.
+ *
+ * An extension chain maybe provided, starting with @extensions, and terminated
+ * by the @next_extension being 0. Currently, no extensions are defined.
+ *
+ * DRM_I915_GEM_VM_DESTROY -
+ *
+ * Destroys a previously created VM id, specified in @vm_id.
+ *
+ * No extensions or flags are allowed currently, and so must be zero.
+ */
+struct drm_i915_gem_vm_control {
+	/** @extensions: Zero-terminated chain of extensions. */
+	__u64 extensions;
+
+	/** @flags: reserved for future usage, currently MBZ */
+	__u32 flags;
+
+	/** @vm_id: Id of the VM created or to be destroyed */
+	__u32 vm_id;
+};
+
+struct drm_i915_reg_read {
+	/*
+	 * Register offset.
+	 * For 64bit wide registers where the upper 32bits don't immediately
+	 * follow the lower 32bits, the offset of the lower 32bits must
+	 * be specified
+	 */
+	__u64 offset;
+#define I915_REG_READ_8B_WA (1ul << 0)
+
+	__u64 val; /* Return value */
+};
+
+/* Known registers:
+ *
+ * Render engine timestamp - 0x2358 + 64bit - gen7+
+ * - Note this register returns an invalid value if using the default
+ *   single instruction 8byte read, in order to workaround that pass
+ *   flag I915_REG_READ_8B_WA in offset field.
+ *
+ */
+
+/*
+ * struct drm_i915_reset_stats - Return global reset and other context stats
+ *
+ * Driver keeps few stats for each contexts and also global reset count.
+ * This struct can be used to query those stats.
+ */
+struct drm_i915_reset_stats {
+	/** @ctx_id: ID of the requested context */
+	__u32 ctx_id;
+
+	/** @flags: MBZ */
+	__u32 flags;
+
+	/** @reset_count: All resets since boot/module reload, for all contexts */
+	__u32 reset_count;
+
+	/** @batch_active: Number of batches lost when active in GPU, for this context */
+	__u32 batch_active;
+
+	/** @batch_pending: Number of batches lost pending for execution, for this context */
+	__u32 batch_pending;
+
+	/** @pad: MBZ */
+	__u32 pad;
+};
+
+/**
+ * struct drm_i915_gem_userptr - Create GEM object from user allocated memory.
+ *
+ * Userptr objects have several restrictions on what ioctls can be used with the
+ * object handle.
+ */
+struct drm_i915_gem_userptr {
+	/**
+	 * @user_ptr: The pointer to the allocated memory.
+	 *
+	 * Needs to be aligned to PAGE_SIZE.
+	 */
+	__u64 user_ptr;
+
+	/**
+	 * @user_size:
+	 *
+	 * The size in bytes for the allocated memory. This will also become the
+	 * object size.
+	 *
+	 * Needs to be aligned to PAGE_SIZE, and should be at least PAGE_SIZE,
+	 * or larger.
+	 */
+	__u64 user_size;
+
+	/**
+	 * @flags:
+	 *
+	 * Supported flags:
+	 *
+	 * I915_USERPTR_READ_ONLY:
+	 *
+	 * Mark the object as readonly, this also means GPU access can only be
+	 * readonly. This is only supported on HW which supports readonly access
+	 * through the GTT. If the HW can't support readonly access, an error is
+	 * returned.
+	 *
+	 * I915_USERPTR_PROBE:
+	 *
+	 * Probe the provided @user_ptr range and validate that the @user_ptr is
+	 * indeed pointing to normal memory and that the range is also valid.
+	 * For example if some garbage address is given to the kernel, then this
+	 * should complain.
+	 *
+	 * Returns -EFAULT if the probe failed.
+	 *
+	 * Note that this doesn't populate the backing pages, and also doesn't
+	 * guarantee that the object will remain valid when the object is
+	 * eventually used.
+	 *
+	 * The kernel supports this feature if I915_PARAM_HAS_USERPTR_PROBE
+	 * returns a non-zero value.
+	 *
+	 * I915_USERPTR_UNSYNCHRONIZED:
+	 *
+	 * NOT USED. Setting this flag will result in an error.
+	 */
+	__u32 flags;
+#define I915_USERPTR_READ_ONLY 0x1
+#define I915_USERPTR_PROBE 0x2
+#define I915_USERPTR_UNSYNCHRONIZED 0x80000000
+	/**
+	 * @handle: Returned handle for the object.
+	 *
+	 * Object handles are nonzero.
+	 */
+	__u32 handle;
+};
+
+enum drm_i915_oa_format {
+	I915_OA_FORMAT_A13 = 1,	    /* HSW only */
+	I915_OA_FORMAT_A29,	    /* HSW only */
+	I915_OA_FORMAT_A13_B8_C8,   /* HSW only */
+	I915_OA_FORMAT_B4_C8,	    /* HSW only */
+	I915_OA_FORMAT_A45_B8_C8,   /* HSW only */
+	I915_OA_FORMAT_B4_C8_A16,   /* HSW only */
+	I915_OA_FORMAT_C4_B8,	    /* HSW+ */
+
+	/* Gen8+ */
+	I915_OA_FORMAT_A12,
+	I915_OA_FORMAT_A12_B8_C8,
+	I915_OA_FORMAT_A32u40_A4u32_B8_C8,
+
+	/* DG2 */
+	I915_OAR_FORMAT_A32u40_A4u32_B8_C8,
+	I915_OA_FORMAT_A24u40_A14u32_B8_C8,
+
+	/* MTL OAM */
+	I915_OAM_FORMAT_MPEC8u64_B8_C8,
+	I915_OAM_FORMAT_MPEC8u32_B8_C8,
+
+	I915_OA_FORMAT_MAX	    /* non-ABI */
+};
+
+enum drm_i915_perf_property_id {
+	/**
+	 * Open the stream for a specific context handle (as used with
+	 * execbuffer2). A stream opened for a specific context this way
+	 * won't typically require root privileges.
+	 *
+	 * This property is available in perf revision 1.
+	 */
+	DRM_I915_PERF_PROP_CTX_HANDLE = 1,
+
+	/**
+	 * A value of 1 requests the inclusion of raw OA unit reports as
+	 * part of stream samples.
+	 *
+	 * This property is available in perf revision 1.
+	 */
+	DRM_I915_PERF_PROP_SAMPLE_OA,
+
+	/**
+	 * The value specifies which set of OA unit metrics should be
+	 * configured, defining the contents of any OA unit reports.
+	 *
+	 * This property is available in perf revision 1.
+	 */
+	DRM_I915_PERF_PROP_OA_METRICS_SET,
+
+	/**
+	 * The value specifies the size and layout of OA unit reports.
+	 *
+	 * This property is available in perf revision 1.
+	 */
+	DRM_I915_PERF_PROP_OA_FORMAT,
+
+	/**
+	 * Specifying this property implicitly requests periodic OA unit
+	 * sampling and (at least on Haswell) the sampling frequency is derived
+	 * from this exponent as follows:
+	 *
+	 *   80ns * 2^(period_exponent + 1)
+	 *
+	 * This property is available in perf revision 1.
+	 */
+	DRM_I915_PERF_PROP_OA_EXPONENT,
+
+	/**
+	 * Specifying this property is only valid when specify a context to
+	 * filter with DRM_I915_PERF_PROP_CTX_HANDLE. Specifying this property
+	 * will hold preemption of the particular context we want to gather
+	 * performance data about. The execbuf2 submissions must include a
+	 * drm_i915_gem_execbuffer_ext_perf parameter for this to apply.
+	 *
+	 * This property is available in perf revision 3.
+	 */
+	DRM_I915_PERF_PROP_HOLD_PREEMPTION,
+
+	/**
+	 * Specifying this pins all contexts to the specified SSEU power
+	 * configuration for the duration of the recording.
+	 *
+	 * This parameter's value is a pointer to a struct
+	 * drm_i915_gem_context_param_sseu.
+	 *
+	 * This property is available in perf revision 4.
+	 */
+	DRM_I915_PERF_PROP_GLOBAL_SSEU,
+
+	/**
+	 * This optional parameter specifies the timer interval in nanoseconds
+	 * at which the i915 driver will check the OA buffer for available data.
+	 * Minimum allowed value is 100 microseconds. A default value is used by
+	 * the driver if this parameter is not specified. Note that larger timer
+	 * values will reduce cpu consumption during OA perf captures. However,
+	 * excessively large values would potentially result in OA buffer
+	 * overwrites as captures reach end of the OA buffer.
+	 *
+	 * This property is available in perf revision 5.
+	 */
+	DRM_I915_PERF_PROP_POLL_OA_PERIOD,
+
+	/**
+	 * Multiple engines may be mapped to the same OA unit. The OA unit is
+	 * identified by class:instance of any engine mapped to it.
+	 *
+	 * This parameter specifies the engine class and must be passed along
+	 * with DRM_I915_PERF_PROP_OA_ENGINE_INSTANCE.
+	 *
+	 * This property is available in perf revision 6.
+	 */
+	DRM_I915_PERF_PROP_OA_ENGINE_CLASS,
+
+	/**
+	 * This parameter specifies the engine instance and must be passed along
+	 * with DRM_I915_PERF_PROP_OA_ENGINE_CLASS.
+	 *
+	 * This property is available in perf revision 6.
+	 */
+	DRM_I915_PERF_PROP_OA_ENGINE_INSTANCE,
+
+	DRM_I915_PERF_PROP_MAX /* non-ABI */
+};
+
+struct drm_i915_perf_open_param {
+	__u32 flags;
+#define I915_PERF_FLAG_FD_CLOEXEC	(1<<0)
+#define I915_PERF_FLAG_FD_NONBLOCK	(1<<1)
+#define I915_PERF_FLAG_DISABLED		(1<<2)
+
+	/** The number of u64 (id, value) pairs */
+	__u32 num_properties;
+
+	/**
+	 * Pointer to array of u64 (id, value) pairs configuring the stream
+	 * to open.
+	 */
+	__u64 properties_ptr;
+};
+
+/*
+ * Enable data capture for a stream that was either opened in a disabled state
+ * via I915_PERF_FLAG_DISABLED or was later disabled via
+ * I915_PERF_IOCTL_DISABLE.
+ *
+ * It is intended to be cheaper to disable and enable a stream than it may be
+ * to close and re-open a stream with the same configuration.
+ *
+ * It's undefined whether any pending data for the stream will be lost.
+ *
+ * This ioctl is available in perf revision 1.
+ */
+#define I915_PERF_IOCTL_ENABLE	_IO('i', 0x0)
+
+/*
+ * Disable data capture for a stream.
+ *
+ * It is an error to try and read a stream that is disabled.
+ *
+ * This ioctl is available in perf revision 1.
+ */
+#define I915_PERF_IOCTL_DISABLE	_IO('i', 0x1)
+
+/*
+ * Change metrics_set captured by a stream.
+ *
+ * If the stream is bound to a specific context, the configuration change
+ * will performed inline with that context such that it takes effect before
+ * the next execbuf submission.
+ *
+ * Returns the previously bound metrics set id, or a negative error code.
+ *
+ * This ioctl is available in perf revision 2.
+ */
+#define I915_PERF_IOCTL_CONFIG	_IO('i', 0x2)
+
+/*
+ * Common to all i915 perf records
+ */
+struct drm_i915_perf_record_header {
+	__u32 type;
+	__u16 pad;
+	__u16 size;
+};
+
+enum drm_i915_perf_record_type {
+
+	/**
+	 * Samples are the work horse record type whose contents are extensible
+	 * and defined when opening an i915 perf stream based on the given
+	 * properties.
+	 *
+	 * Boolean properties following the naming convention
+	 * DRM_I915_PERF_SAMPLE_xyz_PROP request the inclusion of 'xyz' data in
+	 * every sample.
+	 *
+	 * The order of these sample properties given by userspace has no
+	 * affect on the ordering of data within a sample. The order is
+	 * documented here.
+	 *
+	 * struct {
+	 *     struct drm_i915_perf_record_header header;
+	 *
+	 *     { u32 oa_report[]; } && DRM_I915_PERF_PROP_SAMPLE_OA
+	 * };
+	 */
+	DRM_I915_PERF_RECORD_SAMPLE = 1,
+
+	/*
+	 * Indicates that one or more OA reports were not written by the
+	 * hardware. This can happen for example if an MI_REPORT_PERF_COUNT
+	 * command collides with periodic sampling - which would be more likely
+	 * at higher sampling frequencies.
+	 */
+	DRM_I915_PERF_RECORD_OA_REPORT_LOST = 2,
+
+	/**
+	 * An error occurred that resulted in all pending OA reports being lost.
+	 */
+	DRM_I915_PERF_RECORD_OA_BUFFER_LOST = 3,
+
+	DRM_I915_PERF_RECORD_MAX /* non-ABI */
+};
+
+/**
+ * struct drm_i915_perf_oa_config
+ *
+ * Structure to upload perf dynamic configuration into the kernel.
+ */
+struct drm_i915_perf_oa_config {
+	/**
+	 * @uuid:
+	 *
+	 * String formatted like "%\08x-%\04x-%\04x-%\04x-%\012x"
+	 */
+	char uuid[36];
+
+	/**
+	 * @n_mux_regs:
+	 *
+	 * Number of mux regs in &mux_regs_ptr.
+	 */
+	__u32 n_mux_regs;
+
+	/**
+	 * @n_boolean_regs:
+	 *
+	 * Number of boolean regs in &boolean_regs_ptr.
+	 */
+	__u32 n_boolean_regs;
+
+	/**
+	 * @n_flex_regs:
+	 *
+	 * Number of flex regs in &flex_regs_ptr.
+	 */
+	__u32 n_flex_regs;
+
+	/**
+	 * @mux_regs_ptr:
+	 *
+	 * Pointer to tuples of u32 values (register address, value) for mux
+	 * registers.  Expected length of buffer is (2 * sizeof(u32) *
+	 * &n_mux_regs).
+	 */
+	__u64 mux_regs_ptr;
+
+	/**
+	 * @boolean_regs_ptr:
+	 *
+	 * Pointer to tuples of u32 values (register address, value) for mux
+	 * registers.  Expected length of buffer is (2 * sizeof(u32) *
+	 * &n_boolean_regs).
+	 */
+	__u64 boolean_regs_ptr;
+
+	/**
+	 * @flex_regs_ptr:
+	 *
+	 * Pointer to tuples of u32 values (register address, value) for mux
+	 * registers.  Expected length of buffer is (2 * sizeof(u32) *
+	 * &n_flex_regs).
+	 */
+	__u64 flex_regs_ptr;
+};
+
+/**
+ * struct drm_i915_query_item - An individual query for the kernel to process.
+ *
+ * The behaviour is determined by the @query_id. Note that exactly what
+ * @data_ptr is also depends on the specific @query_id.
+ */
+struct drm_i915_query_item {
+	/**
+	 * @query_id:
+	 *
+	 * The id for this query.  Currently accepted query IDs are:
+	 *  - %DRM_I915_QUERY_TOPOLOGY_INFO (see struct drm_i915_query_topology_info)
+	 *  - %DRM_I915_QUERY_ENGINE_INFO (see struct drm_i915_engine_info)
+	 *  - %DRM_I915_QUERY_PERF_CONFIG (see struct drm_i915_query_perf_config)
+	 *  - %DRM_I915_QUERY_MEMORY_REGIONS (see struct drm_i915_query_memory_regions)
+	 *  - %DRM_I915_QUERY_HWCONFIG_BLOB (see `GuC HWCONFIG blob uAPI`)
+	 *  - %DRM_I915_QUERY_GEOMETRY_SUBSLICES (see struct drm_i915_query_topology_info)
+	 *  - %DRM_I915_QUERY_GUC_SUBMISSION_VERSION (see struct drm_i915_query_guc_submission_version)
+	 */
+	__u64 query_id;
+#define DRM_I915_QUERY_TOPOLOGY_INFO		1
+#define DRM_I915_QUERY_ENGINE_INFO		2
+#define DRM_I915_QUERY_PERF_CONFIG		3
+#define DRM_I915_QUERY_MEMORY_REGIONS		4
+#define DRM_I915_QUERY_HWCONFIG_BLOB		5
+#define DRM_I915_QUERY_GEOMETRY_SUBSLICES	6
+#define DRM_I915_QUERY_GUC_SUBMISSION_VERSION	7
+/* Must be kept compact -- no holes and well documented */
+
+	/**
+	 * @length:
+	 *
+	 * When set to zero by userspace, this is filled with the size of the
+	 * data to be written at the @data_ptr pointer. The kernel sets this
+	 * value to a negative value to signal an error on a particular query
+	 * item.
+	 */
+	__s32 length;
+
+	/**
+	 * @flags:
+	 *
+	 * When &query_id == %DRM_I915_QUERY_TOPOLOGY_INFO, must be 0.
+	 *
+	 * When &query_id == %DRM_I915_QUERY_PERF_CONFIG, must be one of the
+	 * following:
+	 *
+	 *	- %DRM_I915_QUERY_PERF_CONFIG_LIST
+	 *      - %DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID
+	 *      - %DRM_I915_QUERY_PERF_CONFIG_FOR_UUID
+	 *
+	 * When &query_id == %DRM_I915_QUERY_GEOMETRY_SUBSLICES must contain
+	 * a struct i915_engine_class_instance that references a render engine.
+	 */
+	__u32 flags;
+#define DRM_I915_QUERY_PERF_CONFIG_LIST          1
+#define DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID 2
+#define DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_ID   3
+
+	/**
+	 * @data_ptr:
+	 *
+	 * Data will be written at the location pointed by @data_ptr when the
+	 * value of @length matches the length of the data to be written by the
+	 * kernel.
+	 */
+	__u64 data_ptr;
+};
+
+/**
+ * struct drm_i915_query - Supply an array of struct drm_i915_query_item for the
+ * kernel to fill out.
+ *
+ * Note that this is generally a two step process for each struct
+ * drm_i915_query_item in the array:
+ *
+ * 1. Call the DRM_IOCTL_I915_QUERY, giving it our array of struct
+ *    drm_i915_query_item, with &drm_i915_query_item.length set to zero. The
+ *    kernel will then fill in the size, in bytes, which tells userspace how
+ *    memory it needs to allocate for the blob(say for an array of properties).
+ *
+ * 2. Next we call DRM_IOCTL_I915_QUERY again, this time with the
+ *    &drm_i915_query_item.data_ptr equal to our newly allocated blob. Note that
+ *    the &drm_i915_query_item.length should still be the same as what the
+ *    kernel previously set. At this point the kernel can fill in the blob.
+ *
+ * Note that for some query items it can make sense for userspace to just pass
+ * in a buffer/blob equal to or larger than the required size. In this case only
+ * a single ioctl call is needed. For some smaller query items this can work
+ * quite well.
+ *
+ */
+struct drm_i915_query {
+	/** @num_items: The number of elements in the @items_ptr array */
+	__u32 num_items;
+
+	/**
+	 * @flags: Unused for now. Must be cleared to zero.
+	 */
+	__u32 flags;
+
+	/**
+	 * @items_ptr:
+	 *
+	 * Pointer to an array of struct drm_i915_query_item. The number of
+	 * array elements is @num_items.
+	 */
+	__u64 items_ptr;
+};
+
+/**
+ * struct drm_i915_query_topology_info
+ *
+ * Describes slice/subslice/EU information queried by
+ * %DRM_I915_QUERY_TOPOLOGY_INFO
+ */
+struct drm_i915_query_topology_info {
+	/**
+	 * @flags:
+	 *
+	 * Unused for now. Must be cleared to zero.
+	 */
+	__u16 flags;
+
+	/**
+	 * @max_slices:
+	 *
+	 * The number of bits used to express the slice mask.
+	 */
+	__u16 max_slices;
+
+	/**
+	 * @max_subslices:
+	 *
+	 * The number of bits used to express the subslice mask.
+	 */
+	__u16 max_subslices;
+
+	/**
+	 * @max_eus_per_subslice:
+	 *
+	 * The number of bits in the EU mask that correspond to a single
+	 * subslice's EUs.
+	 */
+	__u16 max_eus_per_subslice;
+
+	/**
+	 * @subslice_offset:
+	 *
+	 * Offset in data[] at which the subslice masks are stored.
+	 */
+	__u16 subslice_offset;
+
+	/**
+	 * @subslice_stride:
+	 *
+	 * Stride at which each of the subslice masks for each slice are
+	 * stored.
+	 */
+	__u16 subslice_stride;
+
+	/**
+	 * @eu_offset:
+	 *
+	 * Offset in data[] at which the EU masks are stored.
+	 */
+	__u16 eu_offset;
+
+	/**
+	 * @eu_stride:
+	 *
+	 * Stride at which each of the EU masks for each subslice are stored.
+	 */
+	__u16 eu_stride;
+
+	/**
+	 * @data:
+	 *
+	 * Contains 3 pieces of information :
+	 *
+	 * - The slice mask with one bit per slice telling whether a slice is
+	 *   available. The availability of slice X can be queried with the
+	 *   following formula :
+	 *
+	 *   .. code:: c
+	 *
+	 *      (data[X / 8] >> (X % 8)) & 1
+	 *
+	 *   Starting with Xe_HP platforms, Intel hardware no longer has
+	 *   traditional slices so i915 will always report a single slice
+	 *   (hardcoded slicemask = 0x1) which contains all of the platform's
+	 *   subslices.  I.e., the mask here does not reflect any of the newer
+	 *   hardware concepts such as "gslices" or "cslices" since userspace
+	 *   is capable of inferring those from the subslice mask.
+	 *
+	 * - The subslice mask for each slice with one bit per subslice telling
+	 *   whether a subslice is available.  Starting with Gen12 we use the
+	 *   term "subslice" to refer to what the hardware documentation
+	 *   describes as a "dual-subslices."  The availability of subslice Y
+	 *   in slice X can be queried with the following formula :
+	 *
+	 *   .. code:: c
+	 *
+	 *      (data[subslice_offset + X * subslice_stride + Y / 8] >> (Y % 8)) & 1
+	 *
+	 * - The EU mask for each subslice in each slice, with one bit per EU
+	 *   telling whether an EU is available. The availability of EU Z in
+	 *   subslice Y in slice X can be queried with the following formula :
+	 *
+	 *   .. code:: c
+	 *
+	 *      (data[eu_offset +
+	 *            (X * max_subslices + Y) * eu_stride +
+	 *            Z / 8
+	 *       ] >> (Z % 8)) & 1
+	 */
+	__u8 data[];
+};
+
+/**
+ * DOC: Engine Discovery uAPI
+ *
+ * Engine discovery uAPI is a way of enumerating physical engines present in a
+ * GPU associated with an open i915 DRM file descriptor. This supersedes the old
+ * way of using `DRM_IOCTL_I915_GETPARAM` and engine identifiers like
+ * `I915_PARAM_HAS_BLT`.
+ *
+ * The need for this interface came starting with Icelake and newer GPUs, which
+ * started to establish a pattern of having multiple engines of a same class,
+ * where not all instances were always completely functionally equivalent.
+ *
+ * Entry point for this uapi is `DRM_IOCTL_I915_QUERY` with the
+ * `DRM_I915_QUERY_ENGINE_INFO` as the queried item id.
+ *
+ * Example for getting the list of engines:
+ *
+ * .. code-block:: C
+ *
+ * 	struct drm_i915_query_engine_info *info;
+ * 	struct drm_i915_query_item item = {
+ * 		.query_id = DRM_I915_QUERY_ENGINE_INFO;
+ * 	};
+ * 	struct drm_i915_query query = {
+ * 		.num_items = 1,
+ * 		.items_ptr = (uintptr_t)&item,
+ * 	};
+ * 	int err, i;
+ *
+ * 	// First query the size of the blob we need, this needs to be large
+ * 	// enough to hold our array of engines. The kernel will fill out the
+ * 	// item.length for us, which is the number of bytes we need.
+ * 	//
+ *	// Alternatively a large buffer can be allocated straightaway enabling
+ * 	// querying in one pass, in which case item.length should contain the
+ * 	// length of the provided buffer.
+ * 	err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query);
+ * 	if (err) ...
+ *
+ * 	info = calloc(1, item.length);
+ * 	// Now that we allocated the required number of bytes, we call the ioctl
+ * 	// again, this time with the data_ptr pointing to our newly allocated
+ * 	// blob, which the kernel can then populate with info on all engines.
+ *	item.data_ptr = (uintptr_t)&info;
+ *
+ * 	err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query);
+ * 	if (err) ...
+ *
+ * 	// We can now access each engine in the array
+ * 	for (i = 0; i < info->num_engines; i++) {
+ * 		struct drm_i915_engine_info einfo = info->engines[i];
+ * 		u16 class = einfo.engine.class;
+ * 		u16 instance = einfo.engine.instance;
+ * 		....
+ * 	}
+ *
+ * 	free(info);
+ *
+ * Each of the enumerated engines, apart from being defined by its class and
+ * instance (see `struct i915_engine_class_instance`), also can have flags and
+ * capabilities defined as documented in i915_drm.h.
+ *
+ * For instance video engines which support HEVC encoding will have the
+ * `I915_VIDEO_CLASS_CAPABILITY_HEVC` capability bit set.
+ *
+ * Engine discovery only fully comes to its own when combined with the new way
+ * of addressing engines when submitting batch buffers using contexts with
+ * engine maps configured.
+ */
+
+/**
+ * struct drm_i915_engine_info
+ *
+ * Describes one engine and its capabilities as known to the driver.
+ */
+struct drm_i915_engine_info {
+	/** @engine: Engine class and instance. */
+	struct i915_engine_class_instance engine;
+
+	/** @rsvd0: Reserved field. */
+	__u32 rsvd0;
+
+	/** @flags: Engine flags. */
+	__u64 flags;
+#define I915_ENGINE_INFO_HAS_LOGICAL_INSTANCE		(1 << 0)
+
+	/** @capabilities: Capabilities of this engine. */
+	__u64 capabilities;
+#define I915_VIDEO_CLASS_CAPABILITY_HEVC		(1 << 0)
+#define I915_VIDEO_AND_ENHANCE_CLASS_CAPABILITY_SFC	(1 << 1)
+
+	/** @logical_instance: Logical instance of engine */
+	__u16 logical_instance;
+
+	/** @rsvd1: Reserved fields. */
+	__u16 rsvd1[3];
+	/** @rsvd2: Reserved fields. */
+	__u64 rsvd2[3];
+};
+
+/**
+ * struct drm_i915_query_engine_info
+ *
+ * Engine info query enumerates all engines known to the driver by filling in
+ * an array of struct drm_i915_engine_info structures.
+ */
+struct drm_i915_query_engine_info {
+	/** @num_engines: Number of struct drm_i915_engine_info structs following. */
+	__u32 num_engines;
+
+	/** @rsvd: MBZ */
+	__u32 rsvd[3];
+
+	/** @engines: Marker for drm_i915_engine_info structures. */
+	struct drm_i915_engine_info engines[];
+};
+
+/**
+ * struct drm_i915_query_perf_config
+ *
+ * Data written by the kernel with query %DRM_I915_QUERY_PERF_CONFIG and
+ * %DRM_I915_QUERY_GEOMETRY_SUBSLICES.
+ */
+struct drm_i915_query_perf_config {
+	union {
+		/**
+		 * @n_configs:
+		 *
+		 * When &drm_i915_query_item.flags ==
+		 * %DRM_I915_QUERY_PERF_CONFIG_LIST, i915 sets this fields to
+		 * the number of configurations available.
+		 */
+		__u64 n_configs;
+
+		/**
+		 * @config:
+		 *
+		 * When &drm_i915_query_item.flags ==
+		 * %DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_ID, i915 will use the
+		 * value in this field as configuration identifier to decide
+		 * what data to write into config_ptr.
+		 */
+		__u64 config;
+
+		/**
+		 * @uuid:
+		 *
+		 * When &drm_i915_query_item.flags ==
+		 * %DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID, i915 will use the
+		 * value in this field as configuration identifier to decide
+		 * what data to write into config_ptr.
+		 *
+		 * String formatted like "%08x-%04x-%04x-%04x-%012x"
+		 */
+		char uuid[36];
+	};
+
+	/**
+	 * @flags:
+	 *
+	 * Unused for now. Must be cleared to zero.
+	 */
+	__u32 flags;
+
+	/**
+	 * @data:
+	 *
+	 * When &drm_i915_query_item.flags == %DRM_I915_QUERY_PERF_CONFIG_LIST,
+	 * i915 will write an array of __u64 of configuration identifiers.
+	 *
+	 * When &drm_i915_query_item.flags == %DRM_I915_QUERY_PERF_CONFIG_DATA,
+	 * i915 will write a struct drm_i915_perf_oa_config. If the following
+	 * fields of struct drm_i915_perf_oa_config are not set to 0, i915 will
+	 * write into the associated pointers the values of submitted when the
+	 * configuration was created :
+	 *
+	 *  - &drm_i915_perf_oa_config.n_mux_regs
+	 *  - &drm_i915_perf_oa_config.n_boolean_regs
+	 *  - &drm_i915_perf_oa_config.n_flex_regs
+	 */
+	__u8 data[];
+};
+
+/**
+ * enum drm_i915_gem_memory_class - Supported memory classes
+ */
+enum drm_i915_gem_memory_class {
+	/** @I915_MEMORY_CLASS_SYSTEM: System memory */
+	I915_MEMORY_CLASS_SYSTEM = 0,
+	/** @I915_MEMORY_CLASS_DEVICE: Device local-memory */
+	I915_MEMORY_CLASS_DEVICE,
+};
+
+/**
+ * struct drm_i915_gem_memory_class_instance - Identify particular memory region
+ */
+struct drm_i915_gem_memory_class_instance {
+	/** @memory_class: See enum drm_i915_gem_memory_class */
+	__u16 memory_class;
+
+	/** @memory_instance: Which instance */
+	__u16 memory_instance;
+};
+
+/**
+ * struct drm_i915_memory_region_info - Describes one region as known to the
+ * driver.
+ *
+ * Note this is using both struct drm_i915_query_item and struct drm_i915_query.
+ * For this new query we are adding the new query id DRM_I915_QUERY_MEMORY_REGIONS
+ * at &drm_i915_query_item.query_id.
+ */
+struct drm_i915_memory_region_info {
+	/** @region: The class:instance pair encoding */
+	struct drm_i915_gem_memory_class_instance region;
+
+	/** @rsvd0: MBZ */
+	__u32 rsvd0;
+
+	/**
+	 * @probed_size: Memory probed by the driver
+	 *
+	 * Note that it should not be possible to ever encounter a zero value
+	 * here, also note that no current region type will ever return -1 here.
+	 * Although for future region types, this might be a possibility. The
+	 * same applies to the other size fields.
+	 */
+	__u64 probed_size;
+
+	/**
+	 * @unallocated_size: Estimate of memory remaining
+	 *
+	 * Requires CAP_PERFMON or CAP_SYS_ADMIN to get reliable accounting.
+	 * Without this (or if this is an older kernel) the value here will
+	 * always equal the @probed_size. Note this is only currently tracked
+	 * for I915_MEMORY_CLASS_DEVICE regions (for other types the value here
+	 * will always equal the @probed_size).
+	 */
+	__u64 unallocated_size;
+
+	union {
+		/** @rsvd1: MBZ */
+		__u64 rsvd1[8];
+		struct {
+			/**
+			 * @probed_cpu_visible_size: Memory probed by the driver
+			 * that is CPU accessible.
+			 *
+			 * This will be always be <= @probed_size, and the
+			 * remainder (if there is any) will not be CPU
+			 * accessible.
+			 *
+			 * On systems without small BAR, the @probed_size will
+			 * always equal the @probed_cpu_visible_size, since all
+			 * of it will be CPU accessible.
+			 *
+			 * Note this is only tracked for
+			 * I915_MEMORY_CLASS_DEVICE regions (for other types the
+			 * value here will always equal the @probed_size).
+			 *
+			 * Note that if the value returned here is zero, then
+			 * this must be an old kernel which lacks the relevant
+			 * small-bar uAPI support (including
+			 * I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS), but on
+			 * such systems we should never actually end up with a
+			 * small BAR configuration, assuming we are able to load
+			 * the kernel module. Hence it should be safe to treat
+			 * this the same as when @probed_cpu_visible_size ==
+			 * @probed_size.
+			 */
+			__u64 probed_cpu_visible_size;
+
+			/**
+			 * @unallocated_cpu_visible_size: Estimate of CPU
+			 * visible memory remaining.
+			 *
+			 * Note this is only tracked for
+			 * I915_MEMORY_CLASS_DEVICE regions (for other types the
+			 * value here will always equal the
+			 * @probed_cpu_visible_size).
+			 *
+			 * Requires CAP_PERFMON or CAP_SYS_ADMIN to get reliable
+			 * accounting.  Without this the value here will always
+			 * equal the @probed_cpu_visible_size. Note this is only
+			 * currently tracked for I915_MEMORY_CLASS_DEVICE
+			 * regions (for other types the value here will also
+			 * always equal the @probed_cpu_visible_size).
+			 *
+			 * If this is an older kernel the value here will be
+			 * zero, see also @probed_cpu_visible_size.
+			 */
+			__u64 unallocated_cpu_visible_size;
+		};
+	};
+};
+
+/**
+ * struct drm_i915_query_memory_regions
+ *
+ * The region info query enumerates all regions known to the driver by filling
+ * in an array of struct drm_i915_memory_region_info structures.
+ *
+ * Example for getting the list of supported regions:
+ *
+ * .. code-block:: C
+ *
+ *	struct drm_i915_query_memory_regions *info;
+ *	struct drm_i915_query_item item = {
+ *		.query_id = DRM_I915_QUERY_MEMORY_REGIONS;
+ *	};
+ *	struct drm_i915_query query = {
+ *		.num_items = 1,
+ *		.items_ptr = (uintptr_t)&item,
+ *	};
+ *	int err, i;
+ *
+ *	// First query the size of the blob we need, this needs to be large
+ *	// enough to hold our array of regions. The kernel will fill out the
+ *	// item.length for us, which is the number of bytes we need.
+ *	err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query);
+ *	if (err) ...
+ *
+ *	info = calloc(1, item.length);
+ *	// Now that we allocated the required number of bytes, we call the ioctl
+ *	// again, this time with the data_ptr pointing to our newly allocated
+ *	// blob, which the kernel can then populate with the all the region info.
+ *	item.data_ptr = (uintptr_t)&info,
+ *
+ *	err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query);
+ *	if (err) ...
+ *
+ *	// We can now access each region in the array
+ *	for (i = 0; i < info->num_regions; i++) {
+ *		struct drm_i915_memory_region_info mr = info->regions[i];
+ *		u16 class = mr.region.class;
+ *		u16 instance = mr.region.instance;
+ *
+ *		....
+ *	}
+ *
+ *	free(info);
+ */
+struct drm_i915_query_memory_regions {
+	/** @num_regions: Number of supported regions */
+	__u32 num_regions;
+
+	/** @rsvd: MBZ */
+	__u32 rsvd[3];
+
+	/** @regions: Info about each supported region */
+	struct drm_i915_memory_region_info regions[];
+};
+
+/**
+ * struct drm_i915_query_guc_submission_version - query GuC submission interface version
+ */
+struct drm_i915_query_guc_submission_version {
+	/** @branch: Firmware branch version. */
+	__u32 branch;
+	/** @major: Firmware major version. */
+	__u32 major;
+	/** @minor: Firmware minor version. */
+	__u32 minor;
+	/** @patch: Firmware patch version. */
+	__u32 patch;
+};
+
+/**
+ * DOC: GuC HWCONFIG blob uAPI
+ *
+ * The GuC produces a blob with information about the current device.
+ * i915 reads this blob from GuC and makes it available via this uAPI.
+ *
+ * The format and meaning of the blob content are documented in the
+ * Programmer's Reference Manual.
+ */
+
+/**
+ * struct drm_i915_gem_create_ext - Existing gem_create behaviour, with added
+ * extension support using struct i915_user_extension.
+ *
+ * Note that new buffer flags should be added here, at least for the stuff that
+ * is immutable. Previously we would have two ioctls, one to create the object
+ * with gem_create, and another to apply various parameters, however this
+ * creates some ambiguity for the params which are considered immutable. Also in
+ * general we're phasing out the various SET/GET ioctls.
+ */
+struct drm_i915_gem_create_ext {
+	/**
+	 * @size: Requested size for the object.
+	 *
+	 * The (page-aligned) allocated size for the object will be returned.
+	 *
+	 * On platforms like DG2/ATS the kernel will always use 64K or larger
+	 * pages for I915_MEMORY_CLASS_DEVICE. The kernel also requires a
+	 * minimum of 64K GTT alignment for such objects.
+	 *
+	 * NOTE: Previously the ABI here required a minimum GTT alignment of 2M
+	 * on DG2/ATS, due to how the hardware implemented 64K GTT page support,
+	 * where we had the following complications:
+	 *
+	 *   1) The entire PDE (which covers a 2MB virtual address range), must
+	 *   contain only 64K PTEs, i.e mixing 4K and 64K PTEs in the same
+	 *   PDE is forbidden by the hardware.
+	 *
+	 *   2) We still need to support 4K PTEs for I915_MEMORY_CLASS_SYSTEM
+	 *   objects.
+	 *
+	 * However on actual production HW this was completely changed to now
+	 * allow setting a TLB hint at the PTE level (see PS64), which is a lot
+	 * more flexible than the above. With this the 2M restriction was
+	 * dropped where we now only require 64K.
+	 */
+	__u64 size;
+
+	/**
+	 * @handle: Returned handle for the object.
+	 *
+	 * Object handles are nonzero.
+	 */
+	__u32 handle;
+
+	/**
+	 * @flags: Optional flags.
+	 *
+	 * Supported values:
+	 *
+	 * I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS - Signal to the kernel that
+	 * the object will need to be accessed via the CPU.
+	 *
+	 * Only valid when placing objects in I915_MEMORY_CLASS_DEVICE, and only
+	 * strictly required on configurations where some subset of the device
+	 * memory is directly visible/mappable through the CPU (which we also
+	 * call small BAR), like on some DG2+ systems. Note that this is quite
+	 * undesirable, but due to various factors like the client CPU, BIOS etc
+	 * it's something we can expect to see in the wild. See
+	 * &drm_i915_memory_region_info.probed_cpu_visible_size for how to
+	 * determine if this system applies.
+	 *
+	 * Note that one of the placements MUST be I915_MEMORY_CLASS_SYSTEM, to
+	 * ensure the kernel can always spill the allocation to system memory,
+	 * if the object can't be allocated in the mappable part of
+	 * I915_MEMORY_CLASS_DEVICE.
+	 *
+	 * Also note that since the kernel only supports flat-CCS on objects
+	 * that can *only* be placed in I915_MEMORY_CLASS_DEVICE, we therefore
+	 * don't support I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS together with
+	 * flat-CCS.
+	 *
+	 * Without this hint, the kernel will assume that non-mappable
+	 * I915_MEMORY_CLASS_DEVICE is preferred for this object. Note that the
+	 * kernel can still migrate the object to the mappable part, as a last
+	 * resort, if userspace ever CPU faults this object, but this might be
+	 * expensive, and so ideally should be avoided.
+	 *
+	 * On older kernels which lack the relevant small-bar uAPI support (see
+	 * also &drm_i915_memory_region_info.probed_cpu_visible_size),
+	 * usage of the flag will result in an error, but it should NEVER be
+	 * possible to end up with a small BAR configuration, assuming we can
+	 * also successfully load the i915 kernel module. In such cases the
+	 * entire I915_MEMORY_CLASS_DEVICE region will be CPU accessible, and as
+	 * such there are zero restrictions on where the object can be placed.
+	 */
+#define I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS (1 << 0)
+	__u32 flags;
+
+	/**
+	 * @extensions: The chain of extensions to apply to this object.
+	 *
+	 * This will be useful in the future when we need to support several
+	 * different extensions, and we need to apply more than one when
+	 * creating the object. See struct i915_user_extension.
+	 *
+	 * If we don't supply any extensions then we get the same old gem_create
+	 * behaviour.
+	 *
+	 * For I915_GEM_CREATE_EXT_MEMORY_REGIONS usage see
+	 * struct drm_i915_gem_create_ext_memory_regions.
+	 *
+	 * For I915_GEM_CREATE_EXT_PROTECTED_CONTENT usage see
+	 * struct drm_i915_gem_create_ext_protected_content.
+	 *
+	 * For I915_GEM_CREATE_EXT_SET_PAT usage see
+	 * struct drm_i915_gem_create_ext_set_pat.
+	 */
+#define I915_GEM_CREATE_EXT_MEMORY_REGIONS 0
+#define I915_GEM_CREATE_EXT_PROTECTED_CONTENT 1
+#define I915_GEM_CREATE_EXT_SET_PAT 2
+	__u64 extensions;
+};
+
+/**
+ * struct drm_i915_gem_create_ext_memory_regions - The
+ * I915_GEM_CREATE_EXT_MEMORY_REGIONS extension.
+ *
+ * Set the object with the desired set of placements/regions in priority
+ * order. Each entry must be unique and supported by the device.
+ *
+ * This is provided as an array of struct drm_i915_gem_memory_class_instance, or
+ * an equivalent layout of class:instance pair encodings. See struct
+ * drm_i915_query_memory_regions and DRM_I915_QUERY_MEMORY_REGIONS for how to
+ * query the supported regions for a device.
+ *
+ * As an example, on discrete devices, if we wish to set the placement as
+ * device local-memory we can do something like:
+ *
+ * .. code-block:: C
+ *
+ *	struct drm_i915_gem_memory_class_instance region_lmem = {
+ *              .memory_class = I915_MEMORY_CLASS_DEVICE,
+ *              .memory_instance = 0,
+ *      };
+ *      struct drm_i915_gem_create_ext_memory_regions regions = {
+ *              .base = { .name = I915_GEM_CREATE_EXT_MEMORY_REGIONS },
+ *              .regions = (uintptr_t)&region_lmem,
+ *              .num_regions = 1,
+ *      };
+ *      struct drm_i915_gem_create_ext create_ext = {
+ *              .size = 16 * PAGE_SIZE,
+ *              .extensions = (uintptr_t)&regions,
+ *      };
+ *
+ *      int err = ioctl(fd, DRM_IOCTL_I915_GEM_CREATE_EXT, &create_ext);
+ *      if (err) ...
+ *
+ * At which point we get the object handle in &drm_i915_gem_create_ext.handle,
+ * along with the final object size in &drm_i915_gem_create_ext.size, which
+ * should account for any rounding up, if required.
+ *
+ * Note that userspace has no means of knowing the current backing region
+ * for objects where @num_regions is larger than one. The kernel will only
+ * ensure that the priority order of the @regions array is honoured, either
+ * when initially placing the object, or when moving memory around due to
+ * memory pressure
+ *
+ * On Flat-CCS capable HW, compression is supported for the objects residing
+ * in I915_MEMORY_CLASS_DEVICE. When such objects (compressed) have other
+ * memory class in @regions and migrated (by i915, due to memory
+ * constraints) to the non I915_MEMORY_CLASS_DEVICE region, then i915 needs to
+ * decompress the content. But i915 doesn't have the required information to
+ * decompress the userspace compressed objects.
+ *
+ * So i915 supports Flat-CCS, on the objects which can reside only on
+ * I915_MEMORY_CLASS_DEVICE regions.
+ */
+struct drm_i915_gem_create_ext_memory_regions {
+	/** @base: Extension link. See struct i915_user_extension. */
+	struct i915_user_extension base;
+
+	/** @pad: MBZ */
+	__u32 pad;
+	/** @num_regions: Number of elements in the @regions array. */
+	__u32 num_regions;
+	/**
+	 * @regions: The regions/placements array.
+	 *
+	 * An array of struct drm_i915_gem_memory_class_instance.
+	 */
+	__u64 regions;
+};
+
+/**
+ * struct drm_i915_gem_create_ext_protected_content - The
+ * I915_OBJECT_PARAM_PROTECTED_CONTENT extension.
+ *
+ * If this extension is provided, buffer contents are expected to be protected
+ * by PXP encryption and require decryption for scan out and processing. This
+ * is only possible on platforms that have PXP enabled, on all other scenarios
+ * using this extension will cause the ioctl to fail and return -ENODEV. The
+ * flags parameter is reserved for future expansion and must currently be set
+ * to zero.
+ *
+ * The buffer contents are considered invalid after a PXP session teardown.
+ *
+ * The encryption is guaranteed to be processed correctly only if the object
+ * is submitted with a context created using the
+ * I915_CONTEXT_PARAM_PROTECTED_CONTENT flag. This will also enable extra checks
+ * at submission time on the validity of the objects involved.
+ *
+ * Below is an example on how to create a protected object:
+ *
+ * .. code-block:: C
+ *
+ *      struct drm_i915_gem_create_ext_protected_content protected_ext = {
+ *              .base = { .name = I915_GEM_CREATE_EXT_PROTECTED_CONTENT },
+ *              .flags = 0,
+ *      };
+ *      struct drm_i915_gem_create_ext create_ext = {
+ *              .size = PAGE_SIZE,
+ *              .extensions = (uintptr_t)&protected_ext,
+ *      };
+ *
+ *      int err = ioctl(fd, DRM_IOCTL_I915_GEM_CREATE_EXT, &create_ext);
+ *      if (err) ...
+ */
+struct drm_i915_gem_create_ext_protected_content {
+	/** @base: Extension link. See struct i915_user_extension. */
+	struct i915_user_extension base;
+	/** @flags: reserved for future usage, currently MBZ */
+	__u32 flags;
+};
+
+/**
+ * struct drm_i915_gem_create_ext_set_pat - The
+ * I915_GEM_CREATE_EXT_SET_PAT extension.
+ *
+ * If this extension is provided, the specified caching policy (PAT index) is
+ * applied to the buffer object.
+ *
+ * Below is an example on how to create an object with specific caching policy:
+ *
+ * .. code-block:: C
+ *
+ *      struct drm_i915_gem_create_ext_set_pat set_pat_ext = {
+ *              .base = { .name = I915_GEM_CREATE_EXT_SET_PAT },
+ *              .pat_index = 0,
+ *      };
+ *      struct drm_i915_gem_create_ext create_ext = {
+ *              .size = PAGE_SIZE,
+ *              .extensions = (uintptr_t)&set_pat_ext,
+ *      };
+ *
+ *      int err = ioctl(fd, DRM_IOCTL_I915_GEM_CREATE_EXT, &create_ext);
+ *      if (err) ...
+ */
+struct drm_i915_gem_create_ext_set_pat {
+	/** @base: Extension link. See struct i915_user_extension. */
+	struct i915_user_extension base;
+	/**
+	 * @pat_index: PAT index to be set
+	 * PAT index is a bit field in Page Table Entry to control caching
+	 * behaviors for GPU accesses. The definition of PAT index is
+	 * platform dependent and can be found in hardware specifications,
+	 */
+	__u32 pat_index;
+	/** @rsvd: reserved for future use */
+	__u32 rsvd;
+};
+
+/* ID of the protected content session managed by i915 when PXP is active */
+#define I915_PROTECTED_CONTENT_DEFAULT_SESSION 0xf
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* _UAPI_I915_DRM_H_ */
diff --git a/tools/perf/trace/beauty/include/uapi/linux/fadvise.h b/tools/perf/trace/beauty/include/uapi/linux/fadvise.h
new file mode 100644
index 000000000..0862b8743
--- /dev/null
+++ b/tools/perf/trace/beauty/include/uapi/linux/fadvise.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef FADVISE_H_INCLUDED
+#define FADVISE_H_INCLUDED
+
+#define POSIX_FADV_NORMAL	0 /* No further special treatment.  */
+#define POSIX_FADV_RANDOM	1 /* Expect random page references.  */
+#define POSIX_FADV_SEQUENTIAL	2 /* Expect sequential page references.  */
+#define POSIX_FADV_WILLNEED	3 /* Will need these pages.  */
+
+/*
+ * The advise values for POSIX_FADV_DONTNEED and POSIX_ADV_NOREUSE
+ * for s390-64 differ from the values for the rest of the world.
+ */
+#if defined(__s390x__)
+#define POSIX_FADV_DONTNEED	6 /* Don't need these pages.  */
+#define POSIX_FADV_NOREUSE	7 /* Data will be accessed once.  */
+#else
+#define POSIX_FADV_DONTNEED	4 /* Don't need these pages.  */
+#define POSIX_FADV_NOREUSE	5 /* Data will be accessed once.  */
+#endif
+
+#endif	/* FADVISE_H_INCLUDED */
diff --git a/tools/perf/trace/beauty/include/uapi/linux/fcntl.h b/tools/perf/trace/beauty/include/uapi/linux/fcntl.h
new file mode 100644
index 000000000..aadfbf6e0
--- /dev/null
+++ b/tools/perf/trace/beauty/include/uapi/linux/fcntl.h
@@ -0,0 +1,193 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_LINUX_FCNTL_H
+#define _UAPI_LINUX_FCNTL_H
+
+#include <asm/fcntl.h>
+#include <linux/openat2.h>
+#include <linux/types.h>
+
+#define F_SETLEASE	(F_LINUX_SPECIFIC_BASE + 0)
+#define F_GETLEASE	(F_LINUX_SPECIFIC_BASE + 1)
+
+/*
+ * Request nofications on a directory.
+ * See below for events that may be notified.
+ */
+#define F_NOTIFY	(F_LINUX_SPECIFIC_BASE + 2)
+
+#define F_DUPFD_QUERY	(F_LINUX_SPECIFIC_BASE + 3)
+
+/* Was the file just created? */
+#define F_CREATED_QUERY	(F_LINUX_SPECIFIC_BASE + 4)
+
+/*
+ * Cancel a blocking posix lock; internal use only until we expose an
+ * asynchronous lock api to userspace:
+ */
+#define F_CANCELLK	(F_LINUX_SPECIFIC_BASE + 5)
+
+/* Create a file descriptor with FD_CLOEXEC set. */
+#define F_DUPFD_CLOEXEC	(F_LINUX_SPECIFIC_BASE + 6)
+
+/*
+ * Set and get of pipe page size array
+ */
+#define F_SETPIPE_SZ	(F_LINUX_SPECIFIC_BASE + 7)
+#define F_GETPIPE_SZ	(F_LINUX_SPECIFIC_BASE + 8)
+
+/*
+ * Set/Get seals
+ */
+#define F_ADD_SEALS	(F_LINUX_SPECIFIC_BASE + 9)
+#define F_GET_SEALS	(F_LINUX_SPECIFIC_BASE + 10)
+
+/*
+ * Types of seals
+ */
+#define F_SEAL_SEAL	0x0001	/* prevent further seals from being set */
+#define F_SEAL_SHRINK	0x0002	/* prevent file from shrinking */
+#define F_SEAL_GROW	0x0004	/* prevent file from growing */
+#define F_SEAL_WRITE	0x0008	/* prevent writes */
+#define F_SEAL_FUTURE_WRITE	0x0010  /* prevent future writes while mapped */
+#define F_SEAL_EXEC	0x0020  /* prevent chmod modifying exec bits */
+/* (1U << 31) is reserved for signed error codes */
+
+/*
+ * Set/Get write life time hints. {GET,SET}_RW_HINT operate on the
+ * underlying inode, while {GET,SET}_FILE_RW_HINT operate only on
+ * the specific file.
+ */
+#define F_GET_RW_HINT		(F_LINUX_SPECIFIC_BASE + 11)
+#define F_SET_RW_HINT		(F_LINUX_SPECIFIC_BASE + 12)
+#define F_GET_FILE_RW_HINT	(F_LINUX_SPECIFIC_BASE + 13)
+#define F_SET_FILE_RW_HINT	(F_LINUX_SPECIFIC_BASE + 14)
+
+/*
+ * Valid hint values for F_{GET,SET}_RW_HINT. 0 is "not set", or can be
+ * used to clear any hints previously set.
+ */
+#define RWH_WRITE_LIFE_NOT_SET	0
+#define RWH_WRITE_LIFE_NONE	1
+#define RWH_WRITE_LIFE_SHORT	2
+#define RWH_WRITE_LIFE_MEDIUM	3
+#define RWH_WRITE_LIFE_LONG	4
+#define RWH_WRITE_LIFE_EXTREME	5
+
+/*
+ * The originally introduced spelling is remained from the first
+ * versions of the patch set that introduced the feature, see commit
+ * v4.13-rc1~212^2~51.
+ */
+#define RWF_WRITE_LIFE_NOT_SET	RWH_WRITE_LIFE_NOT_SET
+
+/* Set/Get delegations */
+#define F_GETDELEG		(F_LINUX_SPECIFIC_BASE + 15)
+#define F_SETDELEG		(F_LINUX_SPECIFIC_BASE + 16)
+
+/* Argument structure for F_GETDELEG and F_SETDELEG */
+struct delegation {
+	__u32	d_flags;	/* Must be 0 */
+	__u16	d_type;		/* F_RDLCK, F_WRLCK, F_UNLCK */
+	__u16	__pad;		/* Must be 0 */
+};
+
+/*
+ * Types of directory notifications that may be requested.
+ */
+#define DN_ACCESS	0x00000001	/* File accessed */
+#define DN_MODIFY	0x00000002	/* File modified */
+#define DN_CREATE	0x00000004	/* File created */
+#define DN_DELETE	0x00000008	/* File removed */
+#define DN_RENAME	0x00000010	/* File renamed */
+#define DN_ATTRIB	0x00000020	/* File changed attibutes */
+#define DN_MULTISHOT	0x80000000	/* Don't remove notifier */
+
+/* Reserved kernel ranges [-100], [-10000, -40000]. */
+#define AT_FDCWD		-100    /* Special value for dirfd used to
+					   indicate openat should use the
+					   current working directory. */
+
+/*
+ * The concept of process and threads in userland and the kernel is a confusing
+ * one - within the kernel every thread is a 'task' with its own individual PID,
+ * however from userland's point of view threads are grouped by a single PID,
+ * which is that of the 'thread group leader', typically the first thread
+ * spawned.
+ *
+ * To cut the Gideon knot, for internal kernel usage, we refer to
+ * PIDFD_SELF_THREAD to refer to the current thread (or task from a kernel
+ * perspective), and PIDFD_SELF_THREAD_GROUP to refer to the current thread
+ * group leader...
+ */
+#define PIDFD_SELF_THREAD		-10000 /* Current thread. */
+#define PIDFD_SELF_THREAD_GROUP		-10001 /* Current thread group leader. */
+
+#define FD_PIDFS_ROOT			-10002 /* Root of the pidfs filesystem */
+#define FD_NSFS_ROOT			-10003 /* Root of the nsfs filesystem */
+#define FD_INVALID			-10009 /* Invalid file descriptor: -10000 - EBADF = -10009 */
+
+/* Generic flags for the *at(2) family of syscalls. */
+
+/* Reserved for per-syscall flags	0xff. */
+#define AT_SYMLINK_NOFOLLOW		0x100   /* Do not follow symbolic
+						   links. */
+/* Reserved for per-syscall flags	0x200 */
+#define AT_SYMLINK_FOLLOW		0x400   /* Follow symbolic links. */
+#define AT_NO_AUTOMOUNT			0x800	/* Suppress terminal automount
+						   traversal. */
+#define AT_EMPTY_PATH			0x1000	/* Allow empty relative
+						   pathname to operate on dirfd
+						   directly. */
+/*
+ * These flags are currently statx(2)-specific, but they could be made generic
+ * in the future and so they should not be used for other per-syscall flags.
+ */
+#define AT_STATX_SYNC_TYPE		0x6000	/* Type of synchronisation required from statx() */
+#define AT_STATX_SYNC_AS_STAT		0x0000	/* - Do whatever stat() does */
+#define AT_STATX_FORCE_SYNC		0x2000	/* - Force the attributes to be sync'd with the server */
+#define AT_STATX_DONT_SYNC		0x4000	/* - Don't sync attributes with the server */
+
+#define AT_RECURSIVE			0x8000	/* Apply to the entire subtree */
+
+/*
+ * Per-syscall flags for the *at(2) family of syscalls.
+ *
+ * These are flags that are so syscall-specific that a user passing these flags
+ * to the wrong syscall is so "clearly wrong" that we can safely call such
+ * usage "undefined behaviour".
+ *
+ * For example, the constants AT_REMOVEDIR and AT_EACCESS have the same value.
+ * AT_EACCESS is meaningful only to faccessat, while AT_REMOVEDIR is meaningful
+ * only to unlinkat. The two functions do completely different things and
+ * therefore, the flags can be allowed to overlap. For example, passing
+ * AT_REMOVEDIR to faccessat would be undefined behavior and thus treating it
+ * equivalent to AT_EACCESS is valid undefined behavior.
+ *
+ * Note for implementers: When picking a new per-syscall AT_* flag, try to
+ * reuse already existing flags first. This leaves us with as many unused bits
+ * as possible, so we can use them for generic bits in the future if necessary.
+ */
+
+/* Flags for renameat2(2) (must match legacy RENAME_* flags). */
+#define AT_RENAME_NOREPLACE	0x0001
+#define AT_RENAME_EXCHANGE	0x0002
+#define AT_RENAME_WHITEOUT	0x0004
+
+/* Flag for faccessat(2). */
+#define AT_EACCESS		0x200	/* Test access permitted for
+                                           effective IDs, not real IDs.  */
+/* Flag for unlinkat(2). */
+#define AT_REMOVEDIR		0x200   /* Remove directory instead of
+                                           unlinking file.  */
+/* Flags for name_to_handle_at(2). */
+#define AT_HANDLE_FID		0x200	/* File handle is needed to compare
+					   object identity and may not be
+					   usable with open_by_handle_at(2). */
+#define AT_HANDLE_MNT_ID_UNIQUE	0x001	/* Return the u64 unique mount ID. */
+#define AT_HANDLE_CONNECTABLE	0x002	/* Request a connectable file handle */
+
+/* Flags for execveat2(2). */
+#define AT_EXECVE_CHECK		0x10000	/* Only perform a check if execution
+					   would be allowed. */
+
+#endif /* _UAPI_LINUX_FCNTL_H */
diff --git a/tools/perf/trace/beauty/include/uapi/linux/fs.h b/tools/perf/trace/beauty/include/uapi/linux/fs.h
new file mode 100644
index 000000000..bd87262f2
--- /dev/null
+++ b/tools/perf/trace/beauty/include/uapi/linux/fs.h
@@ -0,0 +1,688 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_LINUX_FS_H
+#define _UAPI_LINUX_FS_H
+
+/*
+ * This file has definitions for some important file table structures
+ * and constants and structures used by various generic file system
+ * ioctl's.  Please do not make any changes in this file before
+ * sending patches for review to linux-fsdevel@vger.kernel.org and
+ * linux-api@vger.kernel.org.
+ */
+
+#include <linux/limits.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+#ifndef __KERNEL__
+#include <linux/fscrypt.h>
+#endif
+
+/* Use of MS_* flags within the kernel is restricted to core mount(2) code. */
+#if !defined(__KERNEL__)
+#include <linux/mount.h>
+#endif
+
+/*
+ * It's silly to have NR_OPEN bigger than NR_FILE, but you can change
+ * the file limit at runtime and only root can increase the per-process
+ * nr_file rlimit, so it's safe to set up a ridiculously high absolute
+ * upper limit on files-per-process.
+ *
+ * Some programs (notably those using select()) may have to be 
+ * recompiled to take full advantage of the new limits..  
+ */
+
+/* Fixed constants first: */
+#undef NR_OPEN
+#define INR_OPEN_CUR 1024	/* Initial setting for nfile rlimits */
+#define INR_OPEN_MAX 4096	/* Hard limit for nfile rlimits */
+
+#define BLOCK_SIZE_BITS 10
+#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)
+
+/* flags for integrity meta */
+#define IO_INTEGRITY_CHK_GUARD		(1U << 0) /* enforce guard check */
+#define IO_INTEGRITY_CHK_REFTAG		(1U << 1) /* enforce ref check */
+#define IO_INTEGRITY_CHK_APPTAG		(1U << 2) /* enforce app check */
+
+#define IO_INTEGRITY_VALID_FLAGS (IO_INTEGRITY_CHK_GUARD | \
+				  IO_INTEGRITY_CHK_REFTAG | \
+				  IO_INTEGRITY_CHK_APPTAG)
+
+#define SEEK_SET	0	/* seek relative to beginning of file */
+#define SEEK_CUR	1	/* seek relative to current file position */
+#define SEEK_END	2	/* seek relative to end of file */
+#define SEEK_DATA	3	/* seek to the next data */
+#define SEEK_HOLE	4	/* seek to the next hole */
+#define SEEK_MAX	SEEK_HOLE
+
+#define RENAME_NOREPLACE	(1 << 0)	/* Don't overwrite target */
+#define RENAME_EXCHANGE		(1 << 1)	/* Exchange source and dest */
+#define RENAME_WHITEOUT		(1 << 2)	/* Whiteout source */
+
+/*
+ * The root inode of procfs is guaranteed to always have the same inode number.
+ * For programs that make heavy use of procfs, verifying that the root is a
+ * real procfs root and using openat2(RESOLVE_{NO_{XDEV,MAGICLINKS},BENEATH})
+ * will allow you to make sure you are never tricked into operating on the
+ * wrong procfs file.
+ */
+enum procfs_ino {
+	PROCFS_ROOT_INO = 1,
+};
+
+struct file_clone_range {
+	__s64 src_fd;
+	__u64 src_offset;
+	__u64 src_length;
+	__u64 dest_offset;
+};
+
+struct fstrim_range {
+	__u64 start;
+	__u64 len;
+	__u64 minlen;
+};
+
+/*
+ * We include a length field because some filesystems (vfat) have an identifier
+ * that we do want to expose as a UUID, but doesn't have the standard length.
+ *
+ * We use a fixed size buffer beacuse this interface will, by fiat, never
+ * support "UUIDs" longer than 16 bytes; we don't want to force all downstream
+ * users to have to deal with that.
+ */
+struct fsuuid2 {
+	__u8	len;
+	__u8	uuid[16];
+};
+
+struct fs_sysfs_path {
+	__u8			len;
+	__u8			name[128];
+};
+
+/* Protection info capability flags */
+#define	LBMD_PI_CAP_INTEGRITY		(1 << 0)
+#define	LBMD_PI_CAP_REFTAG		(1 << 1)
+
+/* Checksum types for Protection Information */
+#define LBMD_PI_CSUM_NONE		0
+#define LBMD_PI_CSUM_IP			1
+#define LBMD_PI_CSUM_CRC16_T10DIF	2
+#define LBMD_PI_CSUM_CRC64_NVME		4
+
+/* sizeof first published struct */
+#define LBMD_SIZE_VER0			16
+
+/*
+ * Logical block metadata capability descriptor
+ * If the device does not support metadata, all the fields will be zero.
+ * Applications must check lbmd_flags to determine whether metadata is
+ * supported or not.
+ */
+struct logical_block_metadata_cap {
+	/* Bitmask of logical block metadata capability flags */
+	__u32	lbmd_flags;
+	/*
+	 * The amount of data described by each unit of logical block
+	 * metadata
+	 */
+	__u16	lbmd_interval;
+	/*
+	 * Size in bytes of the logical block metadata associated with each
+	 * interval
+	 */
+	__u8	lbmd_size;
+	/*
+	 * Size in bytes of the opaque block tag associated with each
+	 * interval
+	 */
+	__u8	lbmd_opaque_size;
+	/*
+	 * Offset in bytes of the opaque block tag within the logical block
+	 * metadata
+	 */
+	__u8	lbmd_opaque_offset;
+	/* Size in bytes of the T10 PI tuple associated with each interval */
+	__u8	lbmd_pi_size;
+	/* Offset in bytes of T10 PI tuple within the logical block metadata */
+	__u8	lbmd_pi_offset;
+	/* T10 PI guard tag type */
+	__u8	lbmd_guard_tag_type;
+	/* Size in bytes of the T10 PI application tag */
+	__u8	lbmd_app_tag_size;
+	/* Size in bytes of the T10 PI reference tag */
+	__u8	lbmd_ref_tag_size;
+	/* Size in bytes of the T10 PI storage tag */
+	__u8	lbmd_storage_tag_size;
+	__u8	pad;
+};
+
+/* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */
+#define FILE_DEDUPE_RANGE_SAME		0
+#define FILE_DEDUPE_RANGE_DIFFERS	1
+
+/* from struct btrfs_ioctl_file_extent_same_info */
+struct file_dedupe_range_info {
+	__s64 dest_fd;		/* in - destination file */
+	__u64 dest_offset;	/* in - start of extent in destination */
+	__u64 bytes_deduped;	/* out - total # of bytes we were able
+				 * to dedupe from this file. */
+	/* status of this dedupe operation:
+	 * < 0 for error
+	 * == FILE_DEDUPE_RANGE_SAME if dedupe succeeds
+	 * == FILE_DEDUPE_RANGE_DIFFERS if data differs
+	 */
+	__s32 status;		/* out - see above description */
+	__u32 reserved;		/* must be zero */
+};
+
+/* from struct btrfs_ioctl_file_extent_same_args */
+struct file_dedupe_range {
+	__u64 src_offset;	/* in - start of extent in source */
+	__u64 src_length;	/* in - length of extent */
+	__u16 dest_count;	/* in - total elements in info array */
+	__u16 reserved1;	/* must be zero */
+	__u32 reserved2;	/* must be zero */
+	struct file_dedupe_range_info info[];
+};
+
+/* And dynamically-tunable limits and defaults: */
+struct files_stat_struct {
+	unsigned long nr_files;		/* read only */
+	unsigned long nr_free_files;	/* read only */
+	unsigned long max_files;		/* tunable */
+};
+
+struct inodes_stat_t {
+	long nr_inodes;
+	long nr_unused;
+	long dummy[5];		/* padding for sysctl ABI compatibility */
+};
+
+
+#define NR_FILE  8192	/* this can well be larger on a larger system */
+
+/*
+ * Structure for FS_IOC_FSGETXATTR[A] and FS_IOC_FSSETXATTR.
+ */
+struct fsxattr {
+	__u32		fsx_xflags;	/* xflags field value (get/set) */
+	__u32		fsx_extsize;	/* extsize field value (get/set)*/
+	__u32		fsx_nextents;	/* nextents field value (get)	*/
+	__u32		fsx_projid;	/* project identifier (get/set) */
+	__u32		fsx_cowextsize;	/* CoW extsize field value (get/set)*/
+	unsigned char	fsx_pad[8];
+};
+
+/*
+ * Variable size structure for file_[sg]et_attr().
+ *
+ * Note. This is alternative to the structure 'struct file_kattr'/'struct fsxattr'.
+ * As this structure is passed to/from userspace with its size, this can
+ * be versioned based on the size.
+ */
+struct file_attr {
+	__u64 fa_xflags;	/* xflags field value (get/set) */
+	__u32 fa_extsize;	/* extsize field value (get/set)*/
+	__u32 fa_nextents;	/* nextents field value (get)   */
+	__u32 fa_projid;	/* project identifier (get/set) */
+	__u32 fa_cowextsize;	/* CoW extsize field value (get/set) */
+};
+
+#define FILE_ATTR_SIZE_VER0 24
+#define FILE_ATTR_SIZE_LATEST FILE_ATTR_SIZE_VER0
+
+/*
+ * Flags for the fsx_xflags field
+ */
+#define FS_XFLAG_REALTIME	0x00000001	/* data in realtime volume */
+#define FS_XFLAG_PREALLOC	0x00000002	/* preallocated file extents */
+#define FS_XFLAG_IMMUTABLE	0x00000008	/* file cannot be modified */
+#define FS_XFLAG_APPEND		0x00000010	/* all writes append */
+#define FS_XFLAG_SYNC		0x00000020	/* all writes synchronous */
+#define FS_XFLAG_NOATIME	0x00000040	/* do not update access time */
+#define FS_XFLAG_NODUMP		0x00000080	/* do not include in backups */
+#define FS_XFLAG_RTINHERIT	0x00000100	/* create with rt bit set */
+#define FS_XFLAG_PROJINHERIT	0x00000200	/* create with parents projid */
+#define FS_XFLAG_NOSYMLINKS	0x00000400	/* disallow symlink creation */
+#define FS_XFLAG_EXTSIZE	0x00000800	/* extent size allocator hint */
+#define FS_XFLAG_EXTSZINHERIT	0x00001000	/* inherit inode extent size */
+#define FS_XFLAG_NODEFRAG	0x00002000	/* do not defragment */
+#define FS_XFLAG_FILESTREAM	0x00004000	/* use filestream allocator */
+#define FS_XFLAG_DAX		0x00008000	/* use DAX for IO */
+#define FS_XFLAG_COWEXTSIZE	0x00010000	/* CoW extent size allocator hint */
+#define FS_XFLAG_VERITY		0x00020000	/* fs-verity enabled */
+/*
+ * Case handling flags (read-only, cannot be set via ioctl).
+ * Default (neither set) indicates POSIX semantics: case-sensitive
+ * lookups and case-preserving storage.
+ */
+#define FS_XFLAG_CASEFOLD	0x00040000	/* case-insensitive lookups */
+#define FS_XFLAG_CASENONPRESERVING 0x00080000	/* case not preserved */
+#define FS_XFLAG_HASATTR	0x80000000	/* no DIFLAG for this	*/
+
+/* the read-only stuff doesn't really belong here, but any other place is
+   probably as bad and I don't want to create yet another include file. */
+
+#define BLKROSET   _IO(0x12,93)	/* set device read-only (0 = read-write) */
+#define BLKROGET   _IO(0x12,94)	/* get read-only status (0 = read_write) */
+#define BLKRRPART  _IO(0x12,95)	/* re-read partition table */
+#define BLKGETSIZE _IO(0x12,96)	/* return device size /512 (long *arg) */
+#define BLKFLSBUF  _IO(0x12,97)	/* flush buffer cache */
+#define BLKRASET   _IO(0x12,98)	/* set read ahead for block device */
+#define BLKRAGET   _IO(0x12,99)	/* get current read ahead setting */
+#define BLKFRASET  _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */
+#define BLKFRAGET  _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */
+#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */
+#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */
+#define BLKSSZGET  _IO(0x12,104)/* get block device sector size */
+#if 0
+#define BLKPG      _IO(0x12,105)/* See blkpg.h */
+
+/* Some people are morons.  Do not use sizeof! */
+
+#define BLKELVGET  _IOR(0x12,106,size_t)/* elevator get */
+#define BLKELVSET  _IOW(0x12,107,size_t)/* elevator set */
+/* This was here just to show that the number is taken -
+   probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */
+#endif
+/* A jump here: 108-111 have been used for various private purposes. */
+#define BLKBSZGET  _IOR(0x12,112,size_t)
+#define BLKBSZSET  _IOW(0x12,113,size_t)
+#define BLKGETSIZE64 _IOR(0x12,114,size_t)	/* return device size in bytes (u64 *arg) */
+#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup)
+#define BLKTRACESTART _IO(0x12,116)
+#define BLKTRACESTOP _IO(0x12,117)
+#define BLKTRACETEARDOWN _IO(0x12,118)
+#define BLKDISCARD _IO(0x12,119)
+#define BLKIOMIN _IO(0x12,120)
+#define BLKIOOPT _IO(0x12,121)
+#define BLKALIGNOFF _IO(0x12,122)
+#define BLKPBSZGET _IO(0x12,123)
+#define BLKDISCARDZEROES _IO(0x12,124)
+#define BLKSECDISCARD _IO(0x12,125)
+#define BLKROTATIONAL _IO(0x12,126)
+#define BLKZEROOUT _IO(0x12,127)
+#define BLKGETDISKSEQ _IOR(0x12,128,__u64)
+/* 130-136 and 142 are used by zoned block device ioctls (uapi/linux/blkzoned.h) */
+/* 137-141 are used by blk-crypto ioctls (uapi/linux/blk-crypto.h) */
+#define BLKTRACESETUP2 _IOWR(0x12, 142, struct blk_user_trace_setup2)
+
+#define BMAP_IOCTL 1		/* obsolete - kept for compatibility */
+#define FIBMAP	   _IO(0x00,1)	/* bmap access */
+#define FIGETBSZ   _IO(0x00,2)	/* get the block size used for bmap */
+#define FIFREEZE	_IOWR('X', 119, int)	/* Freeze */
+#define FITHAW		_IOWR('X', 120, int)	/* Thaw */
+#define FITRIM		_IOWR('X', 121, struct fstrim_range)	/* Trim */
+#define FICLONE		_IOW(0x94, 9, int)
+#define FICLONERANGE	_IOW(0x94, 13, struct file_clone_range)
+#define FIDEDUPERANGE	_IOWR(0x94, 54, struct file_dedupe_range)
+
+#define FSLABEL_MAX 256	/* Max chars for the interface; each fs may differ */
+
+#define	FS_IOC_GETFLAGS			_IOR('f', 1, long)
+#define	FS_IOC_SETFLAGS			_IOW('f', 2, long)
+#define	FS_IOC_GETVERSION		_IOR('v', 1, long)
+#define	FS_IOC_SETVERSION		_IOW('v', 2, long)
+#define FS_IOC_FIEMAP			_IOWR('f', 11, struct fiemap)
+#define FS_IOC32_GETFLAGS		_IOR('f', 1, int)
+#define FS_IOC32_SETFLAGS		_IOW('f', 2, int)
+#define FS_IOC32_GETVERSION		_IOR('v', 1, int)
+#define FS_IOC32_SETVERSION		_IOW('v', 2, int)
+#define FS_IOC_FSGETXATTR		_IOR('X', 31, struct fsxattr)
+#define FS_IOC_FSSETXATTR		_IOW('X', 32, struct fsxattr)
+#define FS_IOC_GETFSLABEL		_IOR(0x94, 49, char[FSLABEL_MAX])
+#define FS_IOC_SETFSLABEL		_IOW(0x94, 50, char[FSLABEL_MAX])
+/* Returns the external filesystem UUID, the same one blkid returns */
+#define FS_IOC_GETFSUUID		_IOR(0x15, 0, struct fsuuid2)
+/*
+ * Returns the path component under /sys/fs/ that refers to this filesystem;
+ * also /sys/kernel/debug/ for filesystems with debugfs exports
+ */
+#define FS_IOC_GETFSSYSFSPATH		_IOR(0x15, 1, struct fs_sysfs_path)
+/* Get logical block metadata capability details */
+#define FS_IOC_GETLBMD_CAP		_IOWR(0x15, 2, struct logical_block_metadata_cap)
+
+/*
+ * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS)
+ *
+ * Note: for historical reasons, these flags were originally used and
+ * defined for use by ext2/ext3, and then other file systems started
+ * using these flags so they wouldn't need to write their own version
+ * of chattr/lsattr (which was shipped as part of e2fsprogs).  You
+ * should think twice before trying to use these flags in new
+ * contexts, or trying to assign these flags, since they are used both
+ * as the UAPI and the on-disk encoding for ext2/3/4.  Also, we are
+ * almost out of 32-bit flags.  :-)
+ *
+ * We have recently hoisted FS_IOC_FSGETXATTR / FS_IOC_FSSETXATTR from
+ * XFS to the generic FS level interface.  This uses a structure that
+ * has padding and hence has more room to grow, so it may be more
+ * appropriate for many new use cases.
+ *
+ * Please do not change these flags or interfaces before checking with
+ * linux-fsdevel@vger.kernel.org and linux-api@vger.kernel.org.
+ */
+#define	FS_SECRM_FL			0x00000001 /* Secure deletion */
+#define	FS_UNRM_FL			0x00000002 /* Undelete */
+#define	FS_COMPR_FL			0x00000004 /* Compress file */
+#define FS_SYNC_FL			0x00000008 /* Synchronous updates */
+#define FS_IMMUTABLE_FL			0x00000010 /* Immutable file */
+#define FS_APPEND_FL			0x00000020 /* writes to file may only append */
+#define FS_NODUMP_FL			0x00000040 /* do not dump file */
+#define FS_NOATIME_FL			0x00000080 /* do not update atime */
+/* Reserved for compression usage... */
+#define FS_DIRTY_FL			0x00000100
+#define FS_COMPRBLK_FL			0x00000200 /* One or more compressed clusters */
+#define FS_NOCOMP_FL			0x00000400 /* Don't compress */
+/* End compression flags --- maybe not all used */
+#define FS_ENCRYPT_FL			0x00000800 /* Encrypted file */
+#define FS_BTREE_FL			0x00001000 /* btree format dir */
+#define FS_INDEX_FL			0x00001000 /* hash-indexed directory */
+#define FS_IMAGIC_FL			0x00002000 /* AFS directory */
+#define FS_JOURNAL_DATA_FL		0x00004000 /* Reserved for ext3 */
+#define FS_NOTAIL_FL			0x00008000 /* file tail should not be merged */
+#define FS_DIRSYNC_FL			0x00010000 /* dirsync behaviour (directories only) */
+#define FS_TOPDIR_FL			0x00020000 /* Top of directory hierarchies*/
+#define FS_HUGE_FILE_FL			0x00040000 /* Reserved for ext4 */
+#define FS_EXTENT_FL			0x00080000 /* Extents */
+#define FS_VERITY_FL			0x00100000 /* Verity protected inode */
+#define FS_EA_INODE_FL			0x00200000 /* Inode used for large EA */
+#define FS_EOFBLOCKS_FL			0x00400000 /* Reserved for ext4 */
+#define FS_NOCOW_FL			0x00800000 /* Do not cow file */
+#define FS_DAX_FL			0x02000000 /* Inode is DAX */
+#define FS_INLINE_DATA_FL		0x10000000 /* Reserved for ext4 */
+#define FS_PROJINHERIT_FL		0x20000000 /* Create with parents projid */
+/*
+ * FS_CASEFOLD_FL indicates case-insensitive name lookup. The
+ * bit is most often reported on directories, where it controls
+ * lookups of entries within. Filesystems that derive
+ * case-insensitivity from mount or volume state may also report
+ * it on non-directory inodes; userspace must not assume the bit
+ * is directory-only. FS_XFLAG_CASEFOLD reports the same
+ * information read-only via FS_IOC_FSGETXATTR.
+ */
+#define FS_CASEFOLD_FL			0x40000000
+#define FS_RESERVED_FL			0x80000000 /* reserved for ext2 lib */
+
+#define FS_FL_USER_VISIBLE		0x0003DFFF /* User visible flags */
+#define FS_FL_USER_MODIFIABLE		0x000380FF /* User modifiable flags */
+
+
+#define SYNC_FILE_RANGE_WAIT_BEFORE	1
+#define SYNC_FILE_RANGE_WRITE		2
+#define SYNC_FILE_RANGE_WAIT_AFTER	4
+#define SYNC_FILE_RANGE_WRITE_AND_WAIT	(SYNC_FILE_RANGE_WRITE | \
+					 SYNC_FILE_RANGE_WAIT_BEFORE | \
+					 SYNC_FILE_RANGE_WAIT_AFTER)
+
+/*
+ * Flags for preadv2/pwritev2:
+ */
+
+typedef int __bitwise __kernel_rwf_t;
+
+/* high priority request, poll if possible */
+#define RWF_HIPRI	((__force __kernel_rwf_t)0x00000001)
+
+/* per-IO O_DSYNC */
+#define RWF_DSYNC	((__force __kernel_rwf_t)0x00000002)
+
+/* per-IO O_SYNC */
+#define RWF_SYNC	((__force __kernel_rwf_t)0x00000004)
+
+/* per-IO, return -EAGAIN if operation would block */
+#define RWF_NOWAIT	((__force __kernel_rwf_t)0x00000008)
+
+/* per-IO O_APPEND */
+#define RWF_APPEND	((__force __kernel_rwf_t)0x00000010)
+
+/* per-IO negation of O_APPEND */
+#define RWF_NOAPPEND	((__force __kernel_rwf_t)0x00000020)
+
+/* Atomic Write */
+#define RWF_ATOMIC	((__force __kernel_rwf_t)0x00000040)
+
+/* buffered IO that drops the cache after reading or writing data */
+#define RWF_DONTCACHE	((__force __kernel_rwf_t)0x00000080)
+
+/* prevent pipe and socket writes from raising SIGPIPE */
+#define RWF_NOSIGNAL	((__force __kernel_rwf_t)0x00000100)
+
+/* mask of flags supported by the kernel */
+#define RWF_SUPPORTED	(RWF_HIPRI | RWF_DSYNC | RWF_SYNC | RWF_NOWAIT |\
+			 RWF_APPEND | RWF_NOAPPEND | RWF_ATOMIC |\
+			 RWF_DONTCACHE | RWF_NOSIGNAL)
+
+#define PROCFS_IOCTL_MAGIC 'f'
+
+/* Pagemap ioctl */
+#define PAGEMAP_SCAN	_IOWR(PROCFS_IOCTL_MAGIC, 16, struct pm_scan_arg)
+
+/* Bitmasks provided in pm_scan_args masks and reported in page_region.categories. */
+#define PAGE_IS_WPALLOWED	(1 << 0)
+#define PAGE_IS_WRITTEN		(1 << 1)
+#define PAGE_IS_FILE		(1 << 2)
+#define PAGE_IS_PRESENT		(1 << 3)
+#define PAGE_IS_SWAPPED		(1 << 4)
+#define PAGE_IS_PFNZERO		(1 << 5)
+#define PAGE_IS_HUGE		(1 << 6)
+#define PAGE_IS_SOFT_DIRTY	(1 << 7)
+#define PAGE_IS_GUARD		(1 << 8)
+
+/*
+ * struct page_region - Page region with flags
+ * @start:	Start of the region
+ * @end:	End of the region (exclusive)
+ * @categories:	PAGE_IS_* category bitmask for the region
+ */
+struct page_region {
+	__u64 start;
+	__u64 end;
+	__u64 categories;
+};
+
+/* Flags for PAGEMAP_SCAN ioctl */
+#define PM_SCAN_WP_MATCHING	(1 << 0)	/* Write protect the pages matched. */
+#define PM_SCAN_CHECK_WPASYNC	(1 << 1)	/* Abort the scan when a non-WP-enabled page is found. */
+
+/*
+ * struct pm_scan_arg - Pagemap ioctl argument
+ * @size:		Size of the structure
+ * @flags:		Flags for the IOCTL
+ * @start:		Starting address of the region
+ * @end:		Ending address of the region
+ * @walk_end		Address where the scan stopped (written by kernel).
+ *			walk_end == end (address tags cleared) informs that the scan completed on entire range.
+ * @vec:		Address of page_region struct array for output
+ * @vec_len:		Length of the page_region struct array
+ * @max_pages:		Optional limit for number of returned pages (0 = disabled)
+ * @category_inverted:	PAGE_IS_* categories which values match if 0 instead of 1
+ * @category_mask:	Skip pages for which any category doesn't match
+ * @category_anyof_mask: Skip pages for which no category matches
+ * @return_mask:	PAGE_IS_* categories that are to be reported in `page_region`s returned
+ */
+struct pm_scan_arg {
+	__u64 size;
+	__u64 flags;
+	__u64 start;
+	__u64 end;
+	__u64 walk_end;
+	__u64 vec;
+	__u64 vec_len;
+	__u64 max_pages;
+	__u64 category_inverted;
+	__u64 category_mask;
+	__u64 category_anyof_mask;
+	__u64 return_mask;
+};
+
+/* /proc/<pid>/maps ioctl */
+#define PROCMAP_QUERY	_IOWR(PROCFS_IOCTL_MAGIC, 17, struct procmap_query)
+
+enum procmap_query_flags {
+	/*
+	 * VMA permission flags.
+	 *
+	 * Can be used as part of procmap_query.query_flags field to look up
+	 * only VMAs satisfying specified subset of permissions. E.g., specifying
+	 * PROCMAP_QUERY_VMA_READABLE only will return both readable and read/write VMAs,
+	 * while having PROCMAP_QUERY_VMA_READABLE | PROCMAP_QUERY_VMA_WRITABLE will only
+	 * return read/write VMAs, though both executable/non-executable and
+	 * private/shared will be ignored.
+	 *
+	 * PROCMAP_QUERY_VMA_* flags are also returned in procmap_query.vma_flags
+	 * field to specify actual VMA permissions.
+	 */
+	PROCMAP_QUERY_VMA_READABLE		= 0x01,
+	PROCMAP_QUERY_VMA_WRITABLE		= 0x02,
+	PROCMAP_QUERY_VMA_EXECUTABLE		= 0x04,
+	PROCMAP_QUERY_VMA_SHARED		= 0x08,
+	/*
+	 * Query modifier flags.
+	 *
+	 * By default VMA that covers provided address is returned, or -ENOENT
+	 * is returned. With PROCMAP_QUERY_COVERING_OR_NEXT_VMA flag set, closest
+	 * VMA with vma_start > addr will be returned if no covering VMA is
+	 * found.
+	 *
+	 * PROCMAP_QUERY_FILE_BACKED_VMA instructs query to consider only VMAs that
+	 * have file backing. Can be combined with PROCMAP_QUERY_COVERING_OR_NEXT_VMA
+	 * to iterate all VMAs with file backing.
+	 */
+	PROCMAP_QUERY_COVERING_OR_NEXT_VMA	= 0x10,
+	PROCMAP_QUERY_FILE_BACKED_VMA		= 0x20,
+};
+
+/*
+ * Input/output argument structured passed into ioctl() call. It can be used
+ * to query a set of VMAs (Virtual Memory Areas) of a process.
+ *
+ * Each field can be one of three kinds, marked in a short comment to the
+ * right of the field:
+ *   - "in", input argument, user has to provide this value, kernel doesn't modify it;
+ *   - "out", output argument, kernel sets this field with VMA data;
+ *   - "in/out", input and output argument; user provides initial value (used
+ *     to specify maximum allowable buffer size), and kernel sets it to actual
+ *     amount of data written (or zero, if there is no data).
+ *
+ * If matching VMA is found (according to criterias specified by
+ * query_addr/query_flags, all the out fields are filled out, and ioctl()
+ * returns 0. If there is no matching VMA, -ENOENT will be returned.
+ * In case of any other error, negative error code other than -ENOENT is
+ * returned.
+ *
+ * Most of the data is similar to the one returned as text in /proc/<pid>/maps
+ * file, but procmap_query provides more querying flexibility. There are no
+ * consistency guarantees between subsequent ioctl() calls, but data returned
+ * for matched VMA is self-consistent.
+ */
+struct procmap_query {
+	/* Query struct size, for backwards/forward compatibility */
+	__u64 size;
+	/*
+	 * Query flags, a combination of enum procmap_query_flags values.
+	 * Defines query filtering and behavior, see enum procmap_query_flags.
+	 *
+	 * Input argument, provided by user. Kernel doesn't modify it.
+	 */
+	__u64 query_flags;		/* in */
+	/*
+	 * Query address. By default, VMA that covers this address will
+	 * be looked up. PROCMAP_QUERY_* flags above modify this default
+	 * behavior further.
+	 *
+	 * Input argument, provided by user. Kernel doesn't modify it.
+	 */
+	__u64 query_addr;		/* in */
+	/* VMA starting (inclusive) and ending (exclusive) address, if VMA is found. */
+	__u64 vma_start;		/* out */
+	__u64 vma_end;			/* out */
+	/* VMA permissions flags. A combination of PROCMAP_QUERY_VMA_* flags. */
+	__u64 vma_flags;		/* out */
+	/* VMA backing page size granularity. */
+	__u64 vma_page_size;		/* out */
+	/*
+	 * VMA file offset. If VMA has file backing, this specifies offset
+	 * within the file that VMA's start address corresponds to.
+	 * Is set to zero if VMA has no backing file.
+	 */
+	__u64 vma_offset;		/* out */
+	/* Backing file's inode number, or zero, if VMA has no backing file. */
+	__u64 inode;			/* out */
+	/* Backing file's device major/minor number, or zero, if VMA has no backing file. */
+	__u32 dev_major;		/* out */
+	__u32 dev_minor;		/* out */
+	/*
+	 * If set to non-zero value, signals the request to return VMA name
+	 * (i.e., VMA's backing file's absolute path, with " (deleted)" suffix
+	 * appended, if file was unlinked from FS) for matched VMA. VMA name
+	 * can also be some special name (e.g., "[heap]", "[stack]") or could
+	 * be even user-supplied with prctl(PR_SET_VMA, PR_SET_VMA_ANON_NAME).
+	 *
+	 * Kernel will set this field to zero, if VMA has no associated name.
+	 * Otherwise kernel will return actual amount of bytes filled in
+	 * user-supplied buffer (see vma_name_addr field below), including the
+	 * terminating zero.
+	 *
+	 * If VMA name is longer that user-supplied maximum buffer size,
+	 * -E2BIG error is returned.
+	 *
+	 * If this field is set to non-zero value, vma_name_addr should point
+	 * to valid user space memory buffer of at least vma_name_size bytes.
+	 * If set to zero, vma_name_addr should be set to zero as well
+	 */
+	__u32 vma_name_size;		/* in/out */
+	/*
+	 * If set to non-zero value, signals the request to extract and return
+	 * VMA's backing file's build ID, if the backing file is an ELF file
+	 * and it contains embedded build ID.
+	 *
+	 * Kernel will set this field to zero, if VMA has no backing file,
+	 * backing file is not an ELF file, or ELF file has no build ID
+	 * embedded.
+	 *
+	 * Build ID is a binary value (not a string). Kernel will set
+	 * build_id_size field to exact number of bytes used for build ID.
+	 * If build ID is requested and present, but needs more bytes than
+	 * user-supplied maximum buffer size (see build_id_addr field below),
+	 * -E2BIG error will be returned.
+	 *
+	 * If this field is set to non-zero value, build_id_addr should point
+	 * to valid user space memory buffer of at least build_id_size bytes.
+	 * If set to zero, build_id_addr should be set to zero as well
+	 */
+	__u32 build_id_size;		/* in/out */
+	/*
+	 * User-supplied address of a buffer of at least vma_name_size bytes
+	 * for kernel to fill with matched VMA's name (see vma_name_size field
+	 * description above for details).
+	 *
+	 * Should be set to zero if VMA name should not be returned.
+	 */
+	__u64 vma_name_addr;		/* in */
+	/*
+	 * User-supplied address of a buffer of at least build_id_size bytes
+	 * for kernel to fill with matched VMA's ELF build ID, if available
+	 * (see build_id_size field description above for details).
+	 *
+	 * Should be set to zero if build ID should not be returned.
+	 */
+	__u64 build_id_addr;		/* in */
+};
+
+/*
+ * Shutdown the filesystem.
+ */
+#define FS_IOC_SHUTDOWN _IOR('X', 125, __u32)
+
+/*
+ * Flags for FS_IOC_SHUTDOWN
+ */
+#define FS_SHUTDOWN_FLAGS_DEFAULT	0x0
+#define FS_SHUTDOWN_FLAGS_LOGFLUSH	0x1	/* flush log but not data*/
+#define FS_SHUTDOWN_FLAGS_NOLOGFLUSH	0x2	/* don't flush log nor data */
+
+#endif /* _UAPI_LINUX_FS_H */
diff --git a/tools/perf/trace/beauty/include/uapi/linux/mount.h b/tools/perf/trace/beauty/include/uapi/linux/mount.h
new file mode 100644
index 000000000..2204708db
--- /dev/null
+++ b/tools/perf/trace/beauty/include/uapi/linux/mount.h
@@ -0,0 +1,245 @@
+#ifndef _UAPI_LINUX_MOUNT_H
+#define _UAPI_LINUX_MOUNT_H
+
+#include <linux/types.h>
+
+/*
+ * These are the fs-independent mount-flags: up to 32 flags are supported
+ *
+ * Usage of these is restricted within the kernel to core mount(2) code and
+ * callers of sys_mount() only.  Filesystems should be using the SB_*
+ * equivalent instead.
+ */
+#define MS_RDONLY	 1	/* Mount read-only */
+#define MS_NOSUID	 2	/* Ignore suid and sgid bits */
+#define MS_NODEV	 4	/* Disallow access to device special files */
+#define MS_NOEXEC	 8	/* Disallow program execution */
+#define MS_SYNCHRONOUS	16	/* Writes are synced at once */
+#define MS_REMOUNT	32	/* Alter flags of a mounted FS */
+#define MS_MANDLOCK	64	/* Allow mandatory locks on an FS */
+#define MS_DIRSYNC	128	/* Directory modifications are synchronous */
+#define MS_NOSYMFOLLOW	256	/* Do not follow symlinks */
+#define MS_NOATIME	1024	/* Do not update access times. */
+#define MS_NODIRATIME	2048	/* Do not update directory access times */
+#define MS_BIND		4096
+#define MS_MOVE		8192
+#define MS_REC		16384
+#define MS_VERBOSE	32768	/* War is peace. Verbosity is silence.
+				   MS_VERBOSE is deprecated. */
+#define MS_SILENT	32768
+#define MS_POSIXACL	(1<<16)	/* VFS does not apply the umask */
+#define MS_UNBINDABLE	(1<<17)	/* change to unbindable */
+#define MS_PRIVATE	(1<<18)	/* change to private */
+#define MS_SLAVE	(1<<19)	/* change to slave */
+#define MS_SHARED	(1<<20)	/* change to shared */
+#define MS_RELATIME	(1<<21)	/* Update atime relative to mtime/ctime. */
+#define MS_KERNMOUNT	(1<<22) /* this is a kern_mount call */
+#define MS_I_VERSION	(1<<23) /* Update inode I_version field */
+#define MS_STRICTATIME	(1<<24) /* Always perform atime updates */
+#define MS_LAZYTIME	(1<<25) /* Update the on-disk [acm]times lazily */
+
+/* These sb flags are internal to the kernel */
+#define MS_SUBMOUNT     (1<<26)
+#define MS_NOREMOTELOCK	(1<<27)
+#define MS_NOSEC	(1<<28)
+#define MS_BORN		(1<<29)
+#define MS_ACTIVE	(1<<30)
+#define MS_NOUSER	(1<<31)
+
+/*
+ * Superblock flags that can be altered by MS_REMOUNT
+ */
+#define MS_RMT_MASK	(MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION|\
+			 MS_LAZYTIME)
+
+/*
+ * Old magic mount flag and mask
+ */
+#define MS_MGC_VAL 0xC0ED0000
+#define MS_MGC_MSK 0xffff0000
+
+/*
+ * open_tree() flags.
+ */
+#define OPEN_TREE_CLONE		(1 << 0)	/* Clone the target tree and attach the clone */
+#define OPEN_TREE_NAMESPACE	(1 << 1)	/* Clone the target tree into a new mount namespace */
+#define OPEN_TREE_CLOEXEC	O_CLOEXEC	/* Close the file on execve() */
+
+/*
+ * move_mount() flags.
+ */
+#define MOVE_MOUNT_F_SYMLINKS		0x00000001 /* Follow symlinks on from path */
+#define MOVE_MOUNT_F_AUTOMOUNTS		0x00000002 /* Follow automounts on from path */
+#define MOVE_MOUNT_F_EMPTY_PATH		0x00000004 /* Empty from path permitted */
+#define MOVE_MOUNT_T_SYMLINKS		0x00000010 /* Follow symlinks on to path */
+#define MOVE_MOUNT_T_AUTOMOUNTS		0x00000020 /* Follow automounts on to path */
+#define MOVE_MOUNT_T_EMPTY_PATH		0x00000040 /* Empty to path permitted */
+#define MOVE_MOUNT_SET_GROUP		0x00000100 /* Set sharing group instead */
+#define MOVE_MOUNT_BENEATH		0x00000200 /* Mount beneath top mount */
+#define MOVE_MOUNT__MASK		0x00000377
+
+/*
+ * fsopen() flags.
+ */
+#define FSOPEN_CLOEXEC		0x00000001
+
+/*
+ * fspick() flags.
+ */
+#define FSPICK_CLOEXEC		0x00000001
+#define FSPICK_SYMLINK_NOFOLLOW	0x00000002
+#define FSPICK_NO_AUTOMOUNT	0x00000004
+#define FSPICK_EMPTY_PATH	0x00000008
+
+/*
+ * The type of fsconfig() call made.
+ */
+enum fsconfig_command {
+	FSCONFIG_SET_FLAG	= 0,	/* Set parameter, supplying no value */
+	FSCONFIG_SET_STRING	= 1,	/* Set parameter, supplying a string value */
+	FSCONFIG_SET_BINARY	= 2,	/* Set parameter, supplying a binary blob value */
+	FSCONFIG_SET_PATH	= 3,	/* Set parameter, supplying an object by path */
+	FSCONFIG_SET_PATH_EMPTY	= 4,	/* Set parameter, supplying an object by (empty) path */
+	FSCONFIG_SET_FD		= 5,	/* Set parameter, supplying an object by fd */
+	FSCONFIG_CMD_CREATE	= 6,	/* Create new or reuse existing superblock */
+	FSCONFIG_CMD_RECONFIGURE = 7,	/* Invoke superblock reconfiguration */
+	FSCONFIG_CMD_CREATE_EXCL = 8,	/* Create new superblock, fail if reusing existing superblock */
+};
+
+/*
+ * fsmount() flags.
+ */
+#define FSMOUNT_CLOEXEC		0x00000001
+#define FSMOUNT_NAMESPACE	0x00000002	/* Create the mount in a new mount namespace */
+
+/*
+ * Mount attributes.
+ */
+#define MOUNT_ATTR_RDONLY	0x00000001 /* Mount read-only */
+#define MOUNT_ATTR_NOSUID	0x00000002 /* Ignore suid and sgid bits */
+#define MOUNT_ATTR_NODEV	0x00000004 /* Disallow access to device special files */
+#define MOUNT_ATTR_NOEXEC	0x00000008 /* Disallow program execution */
+#define MOUNT_ATTR__ATIME	0x00000070 /* Setting on how atime should be updated */
+#define MOUNT_ATTR_RELATIME	0x00000000 /* - Update atime relative to mtime/ctime. */
+#define MOUNT_ATTR_NOATIME	0x00000010 /* - Do not update access times. */
+#define MOUNT_ATTR_STRICTATIME	0x00000020 /* - Always perform atime updates */
+#define MOUNT_ATTR_NODIRATIME	0x00000080 /* Do not update directory access times */
+#define MOUNT_ATTR_IDMAP	0x00100000 /* Idmap mount to @userns_fd in struct mount_attr. */
+#define MOUNT_ATTR_NOSYMFOLLOW	0x00200000 /* Do not follow symlinks */
+
+/*
+ * mount_setattr()
+ */
+struct mount_attr {
+	__u64 attr_set;
+	__u64 attr_clr;
+	__u64 propagation;
+	__u64 userns_fd;
+};
+
+/* List of all mount_attr versions. */
+#define MOUNT_ATTR_SIZE_VER0	32 /* sizeof first published struct */
+
+
+/*
+ * Structure for getting mount/superblock/filesystem info with statmount(2).
+ *
+ * The interface is similar to statx(2): individual fields or groups can be
+ * selected with the @mask argument of statmount().  Kernel will set the @mask
+ * field according to the supported fields.
+ *
+ * If string fields are selected, then the caller needs to pass a buffer that
+ * has space after the fixed part of the structure.  Nul terminated strings are
+ * copied there and offsets relative to @str are stored in the relevant fields.
+ * If the buffer is too small, then EOVERFLOW is returned.  The actually used
+ * size is returned in @size.
+ */
+struct statmount {
+	__u32 size;		/* Total size, including strings */
+	__u32 mnt_opts;		/* [str] Options (comma separated, escaped) */
+	__u64 mask;		/* What results were written */
+	__u32 sb_dev_major;	/* Device ID */
+	__u32 sb_dev_minor;
+	__u64 sb_magic;		/* ..._SUPER_MAGIC */
+	__u32 sb_flags;		/* SB_{RDONLY,SYNCHRONOUS,DIRSYNC,LAZYTIME} */
+	__u32 fs_type;		/* [str] Filesystem type */
+	__u64 mnt_id;		/* Unique ID of mount */
+	__u64 mnt_parent_id;	/* Unique ID of parent (for root == mnt_id) */
+	__u32 mnt_id_old;	/* Reused IDs used in proc/.../mountinfo */
+	__u32 mnt_parent_id_old;
+	__u64 mnt_attr;		/* MOUNT_ATTR_... */
+	__u64 mnt_propagation;	/* MS_{SHARED,SLAVE,PRIVATE,UNBINDABLE} */
+	__u64 mnt_peer_group;	/* ID of shared peer group */
+	__u64 mnt_master;	/* Mount receives propagation from this ID */
+	__u64 propagate_from;	/* Propagation from in current namespace */
+	__u32 mnt_root;		/* [str] Root of mount relative to root of fs */
+	__u32 mnt_point;	/* [str] Mountpoint relative to current root */
+	__u64 mnt_ns_id;	/* ID of the mount namespace */
+	__u32 fs_subtype;	/* [str] Subtype of fs_type (if any) */
+	__u32 sb_source;	/* [str] Source string of the mount */
+	__u32 opt_num;		/* Number of fs options */
+	__u32 opt_array;	/* [str] Array of nul terminated fs options */
+	__u32 opt_sec_num;	/* Number of security options */
+	__u32 opt_sec_array;	/* [str] Array of nul terminated security options */
+	__u64 supported_mask;	/* Mask flags that this kernel supports */
+	__u32 mnt_uidmap_num;	/* Number of uid mappings */
+	__u32 mnt_uidmap;	/* [str] Array of uid mappings (as seen from callers namespace) */
+	__u32 mnt_gidmap_num;	/* Number of gid mappings */
+	__u32 mnt_gidmap;	/* [str] Array of gid mappings (as seen from callers namespace) */
+	__u64 __spare2[43];
+	char str[];		/* Variable size part containing strings */
+};
+
+/*
+ * Structure for passing mount ID and miscellaneous parameters to statmount(2)
+ * and listmount(2).
+ *
+ * For statmount(2) @param represents the request mask.
+ * For listmount(2) @param represents the last listed mount id (or zero).
+ */
+struct mnt_id_req {
+	__u32 size;
+	union {
+		__u32 mnt_ns_fd;
+		__u32 mnt_fd;
+	};
+	__u64 mnt_id;
+	__u64 param;
+	__u64 mnt_ns_id;
+};
+
+/* List of all mnt_id_req versions. */
+#define MNT_ID_REQ_SIZE_VER0	24 /* sizeof first published struct */
+#define MNT_ID_REQ_SIZE_VER1	32 /* sizeof second published struct */
+
+/*
+ * @mask bits for statmount(2)
+ */
+#define STATMOUNT_SB_BASIC		0x00000001U     /* Want/got sb_... */
+#define STATMOUNT_MNT_BASIC		0x00000002U	/* Want/got mnt_... */
+#define STATMOUNT_PROPAGATE_FROM	0x00000004U	/* Want/got propagate_from */
+#define STATMOUNT_MNT_ROOT		0x00000008U	/* Want/got mnt_root  */
+#define STATMOUNT_MNT_POINT		0x00000010U	/* Want/got mnt_point */
+#define STATMOUNT_FS_TYPE		0x00000020U	/* Want/got fs_type */
+#define STATMOUNT_MNT_NS_ID		0x00000040U	/* Want/got mnt_ns_id */
+#define STATMOUNT_MNT_OPTS		0x00000080U	/* Want/got mnt_opts */
+#define STATMOUNT_FS_SUBTYPE		0x00000100U	/* Want/got fs_subtype */
+#define STATMOUNT_SB_SOURCE		0x00000200U	/* Want/got sb_source */
+#define STATMOUNT_OPT_ARRAY		0x00000400U	/* Want/got opt_... */
+#define STATMOUNT_OPT_SEC_ARRAY		0x00000800U	/* Want/got opt_sec... */
+#define STATMOUNT_SUPPORTED_MASK	0x00001000U	/* Want/got supported mask flags */
+#define STATMOUNT_MNT_UIDMAP		0x00002000U	/* Want/got uidmap... */
+#define STATMOUNT_MNT_GIDMAP		0x00004000U	/* Want/got gidmap... */
+
+/*
+ * Special @mnt_id values that can be passed to listmount
+ */
+#define LSMT_ROOT		0xffffffffffffffff	/* root mount */
+#define LISTMOUNT_REVERSE	(1 << 0) /* List later mounts first */
+
+/*
+ * @flag bits for statmount(2)
+ */
+#define STATMOUNT_BY_FD		0x00000001U	/* want mountinfo for given fd */
+
+#endif /* _UAPI_LINUX_MOUNT_H */
diff --git a/tools/perf/trace/beauty/include/uapi/linux/prctl.h b/tools/perf/trace/beauty/include/uapi/linux/prctl.h
new file mode 100644
index 000000000..560f99bc4
--- /dev/null
+++ b/tools/perf/trace/beauty/include/uapi/linux/prctl.h
@@ -0,0 +1,420 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _LINUX_PRCTL_H
+#define _LINUX_PRCTL_H
+
+#include <linux/types.h>
+
+/* Values to pass as first argument to prctl() */
+
+#define PR_SET_PDEATHSIG  1  /* Second arg is a signal */
+#define PR_GET_PDEATHSIG  2  /* Second arg is a ptr to return the signal */
+
+/* Get/set current->mm->dumpable */
+#define PR_GET_DUMPABLE   3
+#define PR_SET_DUMPABLE   4
+
+/* Get/set unaligned access control bits (if meaningful) */
+#define PR_GET_UNALIGN	  5
+#define PR_SET_UNALIGN	  6
+# define PR_UNALIGN_NOPRINT	1	/* silently fix up unaligned user accesses */
+# define PR_UNALIGN_SIGBUS	2	/* generate SIGBUS on unaligned user access */
+
+/* Get/set whether or not to drop capabilities on setuid() away from
+ * uid 0 (as per security/commoncap.c) */
+#define PR_GET_KEEPCAPS   7
+#define PR_SET_KEEPCAPS   8
+
+/* Get/set floating-point emulation control bits (if meaningful) */
+#define PR_GET_FPEMU  9
+#define PR_SET_FPEMU 10
+# define PR_FPEMU_NOPRINT	1	/* silently emulate fp operations accesses */
+# define PR_FPEMU_SIGFPE	2	/* don't emulate fp operations, send SIGFPE instead */
+
+/* Get/set floating-point exception mode (if meaningful) */
+#define PR_GET_FPEXC	11
+#define PR_SET_FPEXC	12
+# define PR_FP_EXC_SW_ENABLE	0x80	/* Use FPEXC for FP exception enables */
+# define PR_FP_EXC_DIV		0x010000	/* floating point divide by zero */
+# define PR_FP_EXC_OVF		0x020000	/* floating point overflow */
+# define PR_FP_EXC_UND		0x040000	/* floating point underflow */
+# define PR_FP_EXC_RES		0x080000	/* floating point inexact result */
+# define PR_FP_EXC_INV		0x100000	/* floating point invalid operation */
+# define PR_FP_EXC_DISABLED	0	/* FP exceptions disabled */
+# define PR_FP_EXC_NONRECOV	1	/* async non-recoverable exc. mode */
+# define PR_FP_EXC_ASYNC	2	/* async recoverable exception mode */
+# define PR_FP_EXC_PRECISE	3	/* precise exception mode */
+
+/* Get/set whether we use statistical process timing or accurate timestamp
+ * based process timing */
+#define PR_GET_TIMING   13
+#define PR_SET_TIMING   14
+# define PR_TIMING_STATISTICAL  0       /* Normal, traditional,
+                                                   statistical process timing */
+# define PR_TIMING_TIMESTAMP    1       /* Accurate timestamp based
+                                                   process timing */
+
+#define PR_SET_NAME    15		/* Set process name */
+#define PR_GET_NAME    16		/* Get process name */
+
+/* Get/set process endian */
+#define PR_GET_ENDIAN	19
+#define PR_SET_ENDIAN	20
+# define PR_ENDIAN_BIG		0
+# define PR_ENDIAN_LITTLE	1	/* True little endian mode */
+# define PR_ENDIAN_PPC_LITTLE	2	/* "PowerPC" pseudo little endian */
+
+/* Get/set process seccomp mode */
+#define PR_GET_SECCOMP	21
+#define PR_SET_SECCOMP	22
+
+/* Get/set the capability bounding set (as per security/commoncap.c) */
+#define PR_CAPBSET_READ 23
+#define PR_CAPBSET_DROP 24
+
+/* Get/set the process' ability to use the timestamp counter instruction */
+#define PR_GET_TSC 25
+#define PR_SET_TSC 26
+# define PR_TSC_ENABLE		1	/* allow the use of the timestamp counter */
+# define PR_TSC_SIGSEGV		2	/* throw a SIGSEGV instead of reading the TSC */
+
+/* Get/set securebits (as per security/commoncap.c) */
+#define PR_GET_SECUREBITS 27
+#define PR_SET_SECUREBITS 28
+
+/*
+ * Get/set the timerslack as used by poll/select/nanosleep
+ * A value of 0 means "use default"
+ */
+#define PR_SET_TIMERSLACK 29
+#define PR_GET_TIMERSLACK 30
+
+#define PR_TASK_PERF_EVENTS_DISABLE		31
+#define PR_TASK_PERF_EVENTS_ENABLE		32
+
+/*
+ * Set early/late kill mode for hwpoison memory corruption.
+ * This influences when the process gets killed on a memory corruption.
+ */
+#define PR_MCE_KILL	33
+# define PR_MCE_KILL_CLEAR   0
+# define PR_MCE_KILL_SET     1
+
+# define PR_MCE_KILL_LATE    0
+# define PR_MCE_KILL_EARLY   1
+# define PR_MCE_KILL_DEFAULT 2
+
+#define PR_MCE_KILL_GET 34
+
+/*
+ * Tune up process memory map specifics.
+ */
+#define PR_SET_MM		35
+# define PR_SET_MM_START_CODE		1
+# define PR_SET_MM_END_CODE		2
+# define PR_SET_MM_START_DATA		3
+# define PR_SET_MM_END_DATA		4
+# define PR_SET_MM_START_STACK		5
+# define PR_SET_MM_START_BRK		6
+# define PR_SET_MM_BRK			7
+# define PR_SET_MM_ARG_START		8
+# define PR_SET_MM_ARG_END		9
+# define PR_SET_MM_ENV_START		10
+# define PR_SET_MM_ENV_END		11
+# define PR_SET_MM_AUXV			12
+# define PR_SET_MM_EXE_FILE		13
+# define PR_SET_MM_MAP			14
+# define PR_SET_MM_MAP_SIZE		15
+
+/*
+ * This structure provides new memory descriptor
+ * map which mostly modifies /proc/pid/stat[m]
+ * output for a task. This mostly done in a
+ * sake of checkpoint/restore functionality.
+ */
+struct prctl_mm_map {
+	__u64	start_code;		/* code section bounds */
+	__u64	end_code;
+	__u64	start_data;		/* data section bounds */
+	__u64	end_data;
+	__u64	start_brk;		/* heap for brk() syscall */
+	__u64	brk;
+	__u64	start_stack;		/* stack starts at */
+	__u64	arg_start;		/* command line arguments bounds */
+	__u64	arg_end;
+	__u64	env_start;		/* environment variables bounds */
+	__u64	env_end;
+	__u64	*auxv;			/* auxiliary vector */
+	__u32	auxv_size;		/* vector size */
+	__u32	exe_fd;			/* /proc/$pid/exe link file */
+};
+
+/*
+ * Set specific pid that is allowed to ptrace the current task.
+ * A value of 0 mean "no process".
+ */
+#define PR_SET_PTRACER 0x59616d61
+# define PR_SET_PTRACER_ANY ((unsigned long)-1)
+
+#define PR_SET_CHILD_SUBREAPER	36
+#define PR_GET_CHILD_SUBREAPER	37
+
+/*
+ * If no_new_privs is set, then operations that grant new privileges (i.e.
+ * execve) will either fail or not grant them.  This affects suid/sgid,
+ * file capabilities, and LSMs.
+ *
+ * Operations that merely manipulate or drop existing privileges (setresuid,
+ * capset, etc.) will still work.  Drop those privileges if you want them gone.
+ *
+ * Changing LSM security domain is considered a new privilege.  So, for example,
+ * asking selinux for a specific new context (e.g. with runcon) will result
+ * in execve returning -EPERM.
+ *
+ * See Documentation/userspace-api/no_new_privs.rst for more details.
+ */
+#define PR_SET_NO_NEW_PRIVS	38
+#define PR_GET_NO_NEW_PRIVS	39
+
+#define PR_GET_TID_ADDRESS	40
+
+/*
+ * Flags for PR_SET_THP_DISABLE are only applicable when disabling. Bit 0
+ * is reserved, so PR_GET_THP_DISABLE can return "1 | flags", to effectively
+ * return "1" when no flags were specified for PR_SET_THP_DISABLE.
+ */
+#define PR_SET_THP_DISABLE	41
+/*
+ * Don't disable THPs when explicitly advised (e.g., MADV_HUGEPAGE /
+ * VM_HUGEPAGE, MADV_COLLAPSE).
+ */
+# define PR_THP_DISABLE_EXCEPT_ADVISED	(1 << 1)
+#define PR_GET_THP_DISABLE	42
+
+/*
+ * No longer implemented, but left here to ensure the numbers stay reserved:
+ */
+#define PR_MPX_ENABLE_MANAGEMENT  43
+#define PR_MPX_DISABLE_MANAGEMENT 44
+
+#define PR_SET_FP_MODE		45
+#define PR_GET_FP_MODE		46
+# define PR_FP_MODE_FR		(1 << 0)	/* 64b FP registers */
+# define PR_FP_MODE_FRE		(1 << 1)	/* 32b compatibility */
+
+/* Control the ambient capability set */
+#define PR_CAP_AMBIENT			47
+# define PR_CAP_AMBIENT_IS_SET		1
+# define PR_CAP_AMBIENT_RAISE		2
+# define PR_CAP_AMBIENT_LOWER		3
+# define PR_CAP_AMBIENT_CLEAR_ALL	4
+
+/* arm64 Scalable Vector Extension controls */
+/* Flag values must be kept in sync with ptrace NT_ARM_SVE interface */
+#define PR_SVE_SET_VL			50	/* set task vector length */
+# define PR_SVE_SET_VL_ONEXEC		(1 << 18) /* defer effect until exec */
+#define PR_SVE_GET_VL			51	/* get task vector length */
+/* Bits common to PR_SVE_SET_VL and PR_SVE_GET_VL */
+# define PR_SVE_VL_LEN_MASK		0xffff
+# define PR_SVE_VL_INHERIT		(1 << 17) /* inherit across exec */
+
+/* Per task speculation control */
+#define PR_GET_SPECULATION_CTRL		52
+#define PR_SET_SPECULATION_CTRL		53
+/* Speculation control variants */
+# define PR_SPEC_STORE_BYPASS		0
+# define PR_SPEC_INDIRECT_BRANCH	1
+# define PR_SPEC_L1D_FLUSH		2
+/* Return and control values for PR_SET/GET_SPECULATION_CTRL */
+# define PR_SPEC_NOT_AFFECTED		0
+# define PR_SPEC_PRCTL			(1UL << 0)
+# define PR_SPEC_ENABLE			(1UL << 1)
+# define PR_SPEC_DISABLE		(1UL << 2)
+# define PR_SPEC_FORCE_DISABLE		(1UL << 3)
+# define PR_SPEC_DISABLE_NOEXEC		(1UL << 4)
+
+/* Reset arm64 pointer authentication keys */
+#define PR_PAC_RESET_KEYS		54
+# define PR_PAC_APIAKEY			(1UL << 0)
+# define PR_PAC_APIBKEY			(1UL << 1)
+# define PR_PAC_APDAKEY			(1UL << 2)
+# define PR_PAC_APDBKEY			(1UL << 3)
+# define PR_PAC_APGAKEY			(1UL << 4)
+
+/* Tagged user address controls for arm64 and RISC-V */
+#define PR_SET_TAGGED_ADDR_CTRL		55
+#define PR_GET_TAGGED_ADDR_CTRL		56
+# define PR_TAGGED_ADDR_ENABLE		(1UL << 0)
+/* MTE tag check fault modes */
+# define PR_MTE_TCF_NONE		0UL
+# define PR_MTE_TCF_SYNC		(1UL << 1)
+# define PR_MTE_TCF_ASYNC		(1UL << 2)
+# define PR_MTE_TCF_MASK		(PR_MTE_TCF_SYNC | PR_MTE_TCF_ASYNC)
+/* MTE tag inclusion mask */
+# define PR_MTE_TAG_SHIFT		3
+# define PR_MTE_TAG_MASK		(0xffffUL << PR_MTE_TAG_SHIFT)
+/* Unused; kept only for source compatibility */
+# define PR_MTE_TCF_SHIFT		1
+/* MTE tag check store only */
+# define PR_MTE_STORE_ONLY		(1UL << 19)
+/* RISC-V pointer masking tag length */
+# define PR_PMLEN_SHIFT			24
+# define PR_PMLEN_MASK			(0x7fUL << PR_PMLEN_SHIFT)
+
+/* Control reclaim behavior when allocating memory */
+#define PR_SET_IO_FLUSHER		57
+#define PR_GET_IO_FLUSHER		58
+
+/* Dispatch syscalls to a userspace handler */
+#define PR_SET_SYSCALL_USER_DISPATCH	59
+# define PR_SYS_DISPATCH_OFF		0
+/* Enable dispatch except for the specified range */
+# define PR_SYS_DISPATCH_EXCLUSIVE_ON	1
+/* Enable dispatch for the specified range */
+# define PR_SYS_DISPATCH_INCLUSIVE_ON	2
+/* Legacy name for backwards compatibility */
+# define PR_SYS_DISPATCH_ON		PR_SYS_DISPATCH_EXCLUSIVE_ON
+/* The control values for the user space selector when dispatch is enabled */
+# define SYSCALL_DISPATCH_FILTER_ALLOW	0
+# define SYSCALL_DISPATCH_FILTER_BLOCK	1
+
+/* Set/get enabled arm64 pointer authentication keys */
+#define PR_PAC_SET_ENABLED_KEYS		60
+#define PR_PAC_GET_ENABLED_KEYS		61
+
+/* Request the scheduler to share a core */
+#define PR_SCHED_CORE			62
+# define PR_SCHED_CORE_GET		0
+# define PR_SCHED_CORE_CREATE		1 /* create unique core_sched cookie */
+# define PR_SCHED_CORE_SHARE_TO		2 /* push core_sched cookie to pid */
+# define PR_SCHED_CORE_SHARE_FROM	3 /* pull core_sched cookie to pid */
+# define PR_SCHED_CORE_MAX		4
+# define PR_SCHED_CORE_SCOPE_THREAD		0
+# define PR_SCHED_CORE_SCOPE_THREAD_GROUP	1
+# define PR_SCHED_CORE_SCOPE_PROCESS_GROUP	2
+
+/* arm64 Scalable Matrix Extension controls */
+/* Flag values must be in sync with SVE versions */
+#define PR_SME_SET_VL			63	/* set task vector length */
+# define PR_SME_SET_VL_ONEXEC		(1 << 18) /* defer effect until exec */
+#define PR_SME_GET_VL			64	/* get task vector length */
+/* Bits common to PR_SME_SET_VL and PR_SME_GET_VL */
+# define PR_SME_VL_LEN_MASK		0xffff
+# define PR_SME_VL_INHERIT		(1 << 17) /* inherit across exec */
+
+/* Memory deny write / execute */
+#define PR_SET_MDWE			65
+# define PR_MDWE_REFUSE_EXEC_GAIN	(1UL << 0)
+# define PR_MDWE_NO_INHERIT		(1UL << 1)
+
+#define PR_GET_MDWE			66
+
+#define PR_SET_VMA		0x53564d41
+# define PR_SET_VMA_ANON_NAME		0
+
+#define PR_GET_AUXV			0x41555856
+
+#define PR_SET_MEMORY_MERGE		67
+#define PR_GET_MEMORY_MERGE		68
+
+#define PR_RISCV_V_SET_CONTROL		69
+#define PR_RISCV_V_GET_CONTROL		70
+# define PR_RISCV_V_VSTATE_CTRL_DEFAULT		0
+# define PR_RISCV_V_VSTATE_CTRL_OFF		1
+# define PR_RISCV_V_VSTATE_CTRL_ON		2
+# define PR_RISCV_V_VSTATE_CTRL_INHERIT		(1 << 4)
+# define PR_RISCV_V_VSTATE_CTRL_CUR_MASK	0x3
+# define PR_RISCV_V_VSTATE_CTRL_NEXT_MASK	0xc
+# define PR_RISCV_V_VSTATE_CTRL_MASK		0x1f
+
+#define PR_RISCV_SET_ICACHE_FLUSH_CTX	71
+# define PR_RISCV_CTX_SW_FENCEI_ON	0
+# define PR_RISCV_CTX_SW_FENCEI_OFF	1
+# define PR_RISCV_SCOPE_PER_PROCESS	0
+# define PR_RISCV_SCOPE_PER_THREAD	1
+
+/* PowerPC Dynamic Execution Control Register (DEXCR) controls */
+#define PR_PPC_GET_DEXCR		72
+#define PR_PPC_SET_DEXCR		73
+/* DEXCR aspect to act on */
+# define PR_PPC_DEXCR_SBHE		0 /* Speculative branch hint enable */
+# define PR_PPC_DEXCR_IBRTPD		1 /* Indirect branch recurrent target prediction disable */
+# define PR_PPC_DEXCR_SRAPD		2 /* Subroutine return address prediction disable */
+# define PR_PPC_DEXCR_NPHIE		3 /* Non-privileged hash instruction enable */
+/* Action to apply / return */
+# define PR_PPC_DEXCR_CTRL_EDITABLE	 0x1 /* Aspect can be modified with PR_PPC_SET_DEXCR */
+# define PR_PPC_DEXCR_CTRL_SET		 0x2 /* Set the aspect for this process */
+# define PR_PPC_DEXCR_CTRL_CLEAR	 0x4 /* Clear the aspect for this process */
+# define PR_PPC_DEXCR_CTRL_SET_ONEXEC	 0x8 /* Set the aspect on exec */
+# define PR_PPC_DEXCR_CTRL_CLEAR_ONEXEC	0x10 /* Clear the aspect on exec */
+# define PR_PPC_DEXCR_CTRL_MASK		0x1f
+
+/*
+ * Get the current shadow stack configuration for the current thread,
+ * this will be the value configured via PR_SET_SHADOW_STACK_STATUS.
+ */
+#define PR_GET_SHADOW_STACK_STATUS      74
+
+/*
+ * Set the current shadow stack configuration.  Enabling the shadow
+ * stack will cause a shadow stack to be allocated for the thread.
+ */
+#define PR_SET_SHADOW_STACK_STATUS      75
+# define PR_SHADOW_STACK_ENABLE         (1UL << 0)
+# define PR_SHADOW_STACK_WRITE		(1UL << 1)
+# define PR_SHADOW_STACK_PUSH		(1UL << 2)
+
+/*
+ * Prevent further changes to the specified shadow stack
+ * configuration.  All bits may be locked via this call, including
+ * undefined bits.
+ */
+#define PR_LOCK_SHADOW_STACK_STATUS      76
+
+/*
+ * Controls the mode of timer_create() for CRIU restore operations.
+ * Enabling this allows CRIU to restore timers with explicit IDs.
+ *
+ * Don't use for normal operations as the result might be undefined.
+ */
+#define PR_TIMER_CREATE_RESTORE_IDS		77
+# define PR_TIMER_CREATE_RESTORE_IDS_OFF	0
+# define PR_TIMER_CREATE_RESTORE_IDS_ON		1
+# define PR_TIMER_CREATE_RESTORE_IDS_GET	2
+
+/* FUTEX hash management */
+#define PR_FUTEX_HASH			78
+# define PR_FUTEX_HASH_SET_SLOTS	1
+# define PR_FUTEX_HASH_GET_SLOTS	2
+
+/* RSEQ time slice extensions */
+#define PR_RSEQ_SLICE_EXTENSION			79
+# define PR_RSEQ_SLICE_EXTENSION_GET		1
+# define PR_RSEQ_SLICE_EXTENSION_SET		2
+/*
+ * Bits for RSEQ_SLICE_EXTENSION_GET/SET
+ * PR_RSEQ_SLICE_EXT_ENABLE:	Enable
+ */
+# define PR_RSEQ_SLICE_EXT_ENABLE		0x01
+
+/*
+ * Get or set the control flow integrity (CFI) configuration for the
+ * current thread.
+ *
+ * Some per-thread control flow integrity settings are not yet
+ * controlled through this prctl(); see for example
+ * PR_{GET,SET,LOCK}_SHADOW_STACK_STATUS
+ */
+#define PR_GET_CFI	80
+#define PR_SET_CFI	81
+/*
+ * Forward-edge CFI variants (excluding ARM64 BTI, which has its own
+ * prctl()s).
+ */
+#define PR_CFI_BRANCH_LANDING_PADS	0
+/* Return and control values for PR_{GET,SET}_CFI */
+# define PR_CFI_ENABLE		_BITUL(0)
+# define PR_CFI_DISABLE		_BITUL(1)
+# define PR_CFI_LOCK		_BITUL(2)
+
+
+#endif /* _LINUX_PRCTL_H */
diff --git a/tools/perf/trace/beauty/include/uapi/linux/sched.h b/tools/perf/trace/beauty/include/uapi/linux/sched.h
new file mode 100644
index 000000000..33a462428
--- /dev/null
+++ b/tools/perf/trace/beauty/include/uapi/linux/sched.h
@@ -0,0 +1,162 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_LINUX_SCHED_H
+#define _UAPI_LINUX_SCHED_H
+
+#include <linux/types.h>
+
+/*
+ * cloning flags:
+ */
+#define CSIGNAL		0x000000ff	/* signal mask to be sent at exit */
+#define CLONE_VM	0x00000100	/* set if VM shared between processes */
+#define CLONE_FS	0x00000200	/* set if fs info shared between processes */
+#define CLONE_FILES	0x00000400	/* set if open files shared between processes */
+#define CLONE_SIGHAND	0x00000800	/* set if signal handlers and blocked signals shared */
+#define CLONE_PIDFD	0x00001000	/* set if a pidfd should be placed in parent */
+#define CLONE_PTRACE	0x00002000	/* set if we want to let tracing continue on the child too */
+#define CLONE_VFORK	0x00004000	/* set if the parent wants the child to wake it up on mm_release */
+#define CLONE_PARENT	0x00008000	/* set if we want to have the same parent as the cloner */
+#define CLONE_THREAD	0x00010000	/* Same thread group? */
+#define CLONE_NEWNS	0x00020000	/* New mount namespace group */
+#define CLONE_SYSVSEM	0x00040000	/* share system V SEM_UNDO semantics */
+#define CLONE_SETTLS	0x00080000	/* create a new TLS for the child */
+#define CLONE_PARENT_SETTID	0x00100000	/* set the TID in the parent */
+#define CLONE_CHILD_CLEARTID	0x00200000	/* clear the TID in the child */
+#define CLONE_DETACHED		0x00400000	/* Unused, ignored */
+#define CLONE_UNTRACED		0x00800000	/* set if the tracing process can't force CLONE_PTRACE on this clone */
+#define CLONE_CHILD_SETTID	0x01000000	/* set the TID in the child */
+#define CLONE_NEWCGROUP		0x02000000	/* New cgroup namespace */
+#define CLONE_NEWUTS		0x04000000	/* New utsname namespace */
+#define CLONE_NEWIPC		0x08000000	/* New ipc namespace */
+#define CLONE_NEWUSER		0x10000000	/* New user namespace */
+#define CLONE_NEWPID		0x20000000	/* New pid namespace */
+#define CLONE_NEWNET		0x40000000	/* New network namespace */
+#define CLONE_IO		0x80000000	/* Clone io context */
+
+/* Flags for the clone3() syscall. */
+#define CLONE_CLEAR_SIGHAND	(1ULL << 32) /* Clear any signal handler and reset to SIG_DFL. */
+#define CLONE_INTO_CGROUP	(1ULL << 33) /* Clone into a specific cgroup given the right permissions. */
+#define CLONE_AUTOREAP		(1ULL << 34) /* Auto-reap child on exit. */
+#define CLONE_NNP		(1ULL << 35) /* Set no_new_privs on child. */
+#define CLONE_PIDFD_AUTOKILL	(1ULL << 36) /* Kill child when clone pidfd closes. */
+#define CLONE_EMPTY_MNTNS	(1ULL << 37) /* Create an empty mount namespace. */
+
+/*
+ * cloning flags intersect with CSIGNAL so can be used with unshare and clone3
+ * syscalls only:
+ */
+#define CLONE_NEWTIME	0x00000080	/* New time namespace */
+
+/*
+ * unshare flags share the bit space with clone flags but only apply to the
+ * unshare syscall:
+ */
+#define UNSHARE_EMPTY_MNTNS 0x00100000 /* Unshare an empty mount namespace. */
+
+#ifndef __ASSEMBLY__
+/**
+ * struct clone_args - arguments for the clone3 syscall
+ * @flags:        Flags for the new process as listed above.
+ *                All flags are valid except for CSIGNAL and
+ *                CLONE_DETACHED.
+ * @pidfd:        If CLONE_PIDFD is set, a pidfd will be
+ *                returned in this argument.
+ * @child_tid:    If CLONE_CHILD_SETTID is set, the TID of the
+ *                child process will be returned in the child's
+ *                memory.
+ * @parent_tid:   If CLONE_PARENT_SETTID is set, the TID of
+ *                the child process will be returned in the
+ *                parent's memory.
+ * @exit_signal:  The exit_signal the parent process will be
+ *                sent when the child exits.
+ * @stack:        Specify the location of the stack for the
+ *                child process.
+ *                Note, @stack is expected to point to the
+ *                lowest address. The stack direction will be
+ *                determined by the kernel and set up
+ *                appropriately based on @stack_size.
+ * @stack_size:   The size of the stack for the child process.
+ * @tls:          If CLONE_SETTLS is set, the tls descriptor
+ *                is set to tls.
+ * @set_tid:      Pointer to an array of type *pid_t. The size
+ *                of the array is defined using @set_tid_size.
+ *                This array is used to select PIDs/TIDs for
+ *                newly created processes. The first element in
+ *                this defines the PID in the most nested PID
+ *                namespace. Each additional element in the array
+ *                defines the PID in the parent PID namespace of
+ *                the original PID namespace. If the array has
+ *                less entries than the number of currently
+ *                nested PID namespaces only the PIDs in the
+ *                corresponding namespaces are set.
+ * @set_tid_size: This defines the size of the array referenced
+ *                in @set_tid. This cannot be larger than the
+ *                kernel's limit of nested PID namespaces.
+ * @cgroup:       If CLONE_INTO_CGROUP is specified set this to
+ *                a file descriptor for the cgroup.
+ *
+ * The structure is versioned by size and thus extensible.
+ * New struct members must go at the end of the struct and
+ * must be properly 64bit aligned.
+ */
+struct clone_args {
+	__aligned_u64 flags;
+	__aligned_u64 pidfd;
+	__aligned_u64 child_tid;
+	__aligned_u64 parent_tid;
+	__aligned_u64 exit_signal;
+	__aligned_u64 stack;
+	__aligned_u64 stack_size;
+	__aligned_u64 tls;
+	__aligned_u64 set_tid;
+	__aligned_u64 set_tid_size;
+	__aligned_u64 cgroup;
+};
+#endif
+
+#define CLONE_ARGS_SIZE_VER0 64 /* sizeof first published struct */
+#define CLONE_ARGS_SIZE_VER1 80 /* sizeof second published struct */
+#define CLONE_ARGS_SIZE_VER2 88 /* sizeof third published struct */
+
+/*
+ * Scheduling policies
+ */
+#define SCHED_NORMAL		0
+#define SCHED_FIFO		1
+#define SCHED_RR		2
+#define SCHED_BATCH		3
+/* SCHED_ISO: reserved but not implemented yet */
+#define SCHED_IDLE		5
+#define SCHED_DEADLINE		6
+#define SCHED_EXT		7
+
+/* Can be ORed in to make sure the process is reverted back to SCHED_NORMAL on fork */
+#define SCHED_RESET_ON_FORK     0x40000000
+
+/*
+ * For the sched_{set,get}attr() calls
+ */
+#define SCHED_FLAG_RESET_ON_FORK	0x01
+#define SCHED_FLAG_RECLAIM		0x02
+#define SCHED_FLAG_DL_OVERRUN		0x04
+#define SCHED_FLAG_KEEP_POLICY		0x08
+#define SCHED_FLAG_KEEP_PARAMS		0x10
+#define SCHED_FLAG_UTIL_CLAMP_MIN	0x20
+#define SCHED_FLAG_UTIL_CLAMP_MAX	0x40
+
+#define SCHED_FLAG_KEEP_ALL	(SCHED_FLAG_KEEP_POLICY | \
+				 SCHED_FLAG_KEEP_PARAMS)
+
+#define SCHED_FLAG_UTIL_CLAMP	(SCHED_FLAG_UTIL_CLAMP_MIN | \
+				 SCHED_FLAG_UTIL_CLAMP_MAX)
+
+#define SCHED_FLAG_ALL	(SCHED_FLAG_RESET_ON_FORK	| \
+			 SCHED_FLAG_RECLAIM		| \
+			 SCHED_FLAG_DL_OVERRUN		| \
+			 SCHED_FLAG_KEEP_ALL		| \
+			 SCHED_FLAG_UTIL_CLAMP)
+
+/* Only for sched_getattr() own flag param, if task is SCHED_DEADLINE */
+#define SCHED_GETATTR_FLAG_DL_DYNAMIC	0x01
+
+#endif /* _UAPI_LINUX_SCHED_H */
diff --git a/tools/perf/trace/beauty/include/uapi/linux/stat.h b/tools/perf/trace/beauty/include/uapi/linux/stat.h
new file mode 100644
index 000000000..1686861aa
--- /dev/null
+++ b/tools/perf/trace/beauty/include/uapi/linux/stat.h
@@ -0,0 +1,260 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_LINUX_STAT_H
+#define _UAPI_LINUX_STAT_H
+
+#include <linux/types.h>
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#define S_IFMT  00170000
+#define S_IFSOCK 0140000
+#define S_IFLNK	 0120000
+#define S_IFREG  0100000
+#define S_IFBLK  0060000
+#define S_IFDIR  0040000
+#define S_IFCHR  0020000
+#define S_IFIFO  0010000
+#define S_ISUID  0004000
+#define S_ISGID  0002000
+#define S_ISVTX  0001000
+
+#define S_ISLNK(m)	(((m) & S_IFMT) == S_IFLNK)
+#define S_ISREG(m)	(((m) & S_IFMT) == S_IFREG)
+#define S_ISDIR(m)	(((m) & S_IFMT) == S_IFDIR)
+#define S_ISCHR(m)	(((m) & S_IFMT) == S_IFCHR)
+#define S_ISBLK(m)	(((m) & S_IFMT) == S_IFBLK)
+#define S_ISFIFO(m)	(((m) & S_IFMT) == S_IFIFO)
+#define S_ISSOCK(m)	(((m) & S_IFMT) == S_IFSOCK)
+
+#define S_IRWXU 00700
+#define S_IRUSR 00400
+#define S_IWUSR 00200
+#define S_IXUSR 00100
+
+#define S_IRWXG 00070
+#define S_IRGRP 00040
+#define S_IWGRP 00020
+#define S_IXGRP 00010
+
+#define S_IRWXO 00007
+#define S_IROTH 00004
+#define S_IWOTH 00002
+#define S_IXOTH 00001
+
+#endif
+
+/*
+ * Timestamp structure for the timestamps in struct statx.
+ *
+ * tv_sec holds the number of seconds before (negative) or after (positive)
+ * 00:00:00 1st January 1970 UTC.
+ *
+ * tv_nsec holds a number of nanoseconds (0..999,999,999) after the tv_sec time.
+ *
+ * __reserved is held in case we need a yet finer resolution.
+ */
+struct statx_timestamp {
+	__s64	tv_sec;
+	__u32	tv_nsec;
+	__s32	__reserved;
+};
+
+/*
+ * Structures for the extended file attribute retrieval system call
+ * (statx()).
+ *
+ * The caller passes a mask of what they're specifically interested in as a
+ * parameter to statx().  What statx() actually got will be indicated in
+ * st_mask upon return.
+ *
+ * For each bit in the mask argument:
+ *
+ * - if the datum is not supported:
+ *
+ *   - the bit will be cleared, and
+ *
+ *   - the datum will be set to an appropriate fabricated value if one is
+ *     available (eg. CIFS can take a default uid and gid), otherwise
+ *
+ *   - the field will be cleared;
+ *
+ * - otherwise, if explicitly requested:
+ *
+ *   - the datum will be synchronised to the server if AT_STATX_FORCE_SYNC is
+ *     set or if the datum is considered out of date, and
+ *
+ *   - the field will be filled in and the bit will be set;
+ *
+ * - otherwise, if not requested, but available in approximate form without any
+ *   effort, it will be filled in anyway, and the bit will be set upon return
+ *   (it might not be up to date, however, and no attempt will be made to
+ *   synchronise the internal state first);
+ *
+ * - otherwise the field and the bit will be cleared before returning.
+ *
+ * Items in STATX_BASIC_STATS may be marked unavailable on return, but they
+ * will have values installed for compatibility purposes so that stat() and
+ * co. can be emulated in userspace.
+ */
+struct statx {
+	/* 0x00 */
+	/* What results were written [uncond] */
+	__u32	stx_mask;
+
+	/* Preferred general I/O size [uncond] */
+	__u32	stx_blksize;
+
+	/* Flags conveying information about the file [uncond] */
+	__u64	stx_attributes;
+
+	/* 0x10 */
+	/* Number of hard links */
+	__u32	stx_nlink;
+
+	/* User ID of owner */
+	__u32	stx_uid;
+
+	/* Group ID of owner */
+	__u32	stx_gid;
+
+	/* File mode */
+	__u16	stx_mode;
+	__u16	__spare0[1];
+
+	/* 0x20 */
+	/* Inode number */
+	__u64	stx_ino;
+
+	/* File size */
+	__u64	stx_size;
+
+	/* Number of 512-byte blocks allocated */
+	__u64	stx_blocks;
+
+	/* Mask to show what's supported in stx_attributes */
+	__u64	stx_attributes_mask;
+
+	/* 0x40 */
+	/* Last access time */
+	struct statx_timestamp	stx_atime;
+
+	/* File creation time */
+	struct statx_timestamp	stx_btime;
+
+	/* Last attribute change time */
+	struct statx_timestamp	stx_ctime;
+
+	/* Last data modification time */
+	struct statx_timestamp	stx_mtime;
+
+	/* 0x80 */
+	/* Device ID of special file [if bdev/cdev] */
+	__u32	stx_rdev_major;
+	__u32	stx_rdev_minor;
+
+	/* ID of device containing file [uncond] */
+	__u32	stx_dev_major;
+	__u32	stx_dev_minor;
+
+	/* 0x90 */
+	__u64	stx_mnt_id;
+
+	/* Memory buffer alignment for direct I/O */
+	__u32	stx_dio_mem_align;
+
+	/* File offset alignment for direct I/O */
+	__u32	stx_dio_offset_align;
+
+	/* 0xa0 */
+	/* Subvolume identifier */
+	__u64	stx_subvol;
+
+	/* Min atomic write unit in bytes */
+	__u32	stx_atomic_write_unit_min;
+
+	/* Max atomic write unit in bytes */
+	__u32	stx_atomic_write_unit_max;
+
+	/* 0xb0 */
+	/* Max atomic write segment count */
+	__u32   stx_atomic_write_segments_max;
+
+	/* File offset alignment for direct I/O reads */
+	__u32	stx_dio_read_offset_align;
+
+	/* Optimised max atomic write unit in bytes */
+	__u32	stx_atomic_write_unit_max_opt;
+	__u32	__spare2[1];
+
+	/* 0xc0 */
+	__u64	__spare3[8];	/* Spare space for future expansion */
+
+	/* 0x100 */
+};
+
+/*
+ * Flags to be stx_mask
+ *
+ * Query request/result mask for statx() and struct statx::stx_mask.
+ *
+ * These bits should be set in the mask argument of statx() to request
+ * particular items when calling statx().
+ */
+#define STATX_TYPE		0x00000001U	/* Want/got stx_mode & S_IFMT */
+#define STATX_MODE		0x00000002U	/* Want/got stx_mode & ~S_IFMT */
+#define STATX_NLINK		0x00000004U	/* Want/got stx_nlink */
+#define STATX_UID		0x00000008U	/* Want/got stx_uid */
+#define STATX_GID		0x00000010U	/* Want/got stx_gid */
+#define STATX_ATIME		0x00000020U	/* Want/got stx_atime */
+#define STATX_MTIME		0x00000040U	/* Want/got stx_mtime */
+#define STATX_CTIME		0x00000080U	/* Want/got stx_ctime */
+#define STATX_INO		0x00000100U	/* Want/got stx_ino */
+#define STATX_SIZE		0x00000200U	/* Want/got stx_size */
+#define STATX_BLOCKS		0x00000400U	/* Want/got stx_blocks */
+#define STATX_BASIC_STATS	0x000007ffU	/* The stuff in the normal stat struct */
+#define STATX_BTIME		0x00000800U	/* Want/got stx_btime */
+#define STATX_MNT_ID		0x00001000U	/* Got stx_mnt_id */
+#define STATX_DIOALIGN		0x00002000U	/* Want/got direct I/O alignment info */
+#define STATX_MNT_ID_UNIQUE	0x00004000U	/* Want/got extended stx_mount_id */
+#define STATX_SUBVOL		0x00008000U	/* Want/got stx_subvol */
+#define STATX_WRITE_ATOMIC	0x00010000U	/* Want/got atomic_write_* fields */
+#define STATX_DIO_READ_ALIGN	0x00020000U	/* Want/got dio read alignment info */
+
+#define STATX__RESERVED		0x80000000U	/* Reserved for future struct statx expansion */
+
+#ifndef __KERNEL__
+/*
+ * This is deprecated, and shall remain the same value in the future.  To avoid
+ * confusion please use the equivalent (STATX_BASIC_STATS | STATX_BTIME)
+ * instead.
+ */
+#define STATX_ALL		0x00000fffU
+#endif
+
+/*
+ * Attributes to be found in stx_attributes and masked in stx_attributes_mask.
+ *
+ * These give information about the features or the state of a file that might
+ * be of use to ordinary userspace programs such as GUIs or ls rather than
+ * specialised tools.
+ *
+ * Note that the flags marked [I] correspond to the FS_IOC_SETFLAGS flags
+ * semantically.  Where possible, the numerical value is picked to correspond
+ * also.  Note that the DAX attribute indicates that the file is in the CPU
+ * direct access state.  It does not correspond to the per-inode flag that
+ * some filesystems support.
+ *
+ */
+#define STATX_ATTR_COMPRESSED		0x00000004 /* [I] File is compressed by the fs */
+#define STATX_ATTR_IMMUTABLE		0x00000010 /* [I] File is marked immutable */
+#define STATX_ATTR_APPEND		0x00000020 /* [I] File is append-only */
+#define STATX_ATTR_NODUMP		0x00000040 /* [I] File is not to be dumped */
+#define STATX_ATTR_ENCRYPTED		0x00000800 /* [I] File requires key to decrypt in fs */
+#define STATX_ATTR_AUTOMOUNT		0x00001000 /* Dir: Automount trigger */
+#define STATX_ATTR_MOUNT_ROOT		0x00002000 /* Root of a mount */
+#define STATX_ATTR_VERITY		0x00100000 /* [I] Verity protected file */
+#define STATX_ATTR_DAX			0x00200000 /* File is currently in DAX state */
+#define STATX_ATTR_WRITE_ATOMIC		0x00400000 /* File supports atomic write operations */
+
+
+#endif /* _UAPI_LINUX_STAT_H */
diff --git a/tools/perf/trace/beauty/include/uapi/linux/usbdevice_fs.h b/tools/perf/trace/beauty/include/uapi/linux/usbdevice_fs.h
new file mode 100644
index 000000000..74a84e024
--- /dev/null
+++ b/tools/perf/trace/beauty/include/uapi/linux/usbdevice_fs.h
@@ -0,0 +1,231 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*****************************************************************************/
+
+/*
+ *	usbdevice_fs.h  --  USB device file system.
+ *
+ *	Copyright (C) 2000
+ *          Thomas Sailer (sailer@ife.ee.ethz.ch)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  History:
+ *   0.1  04.01.2000  Created
+ */
+
+/*****************************************************************************/
+
+#ifndef _UAPI_LINUX_USBDEVICE_FS_H
+#define _UAPI_LINUX_USBDEVICE_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+/* --------------------------------------------------------------------- */
+
+/* usbdevfs ioctl codes */
+
+struct usbdevfs_ctrltransfer {
+	__u8 bRequestType;
+	__u8 bRequest;
+	__u16 wValue;
+	__u16 wIndex;
+	__u16 wLength;
+	__u32 timeout;  /* in milliseconds */
+ 	void __user *data;
+};
+
+struct usbdevfs_bulktransfer {
+	unsigned int ep;
+	unsigned int len;
+	unsigned int timeout; /* in milliseconds */
+	void __user *data;
+};
+
+struct usbdevfs_setinterface {
+	unsigned int interface;
+	unsigned int altsetting;
+};
+
+struct usbdevfs_disconnectsignal {
+	unsigned int signr;
+	void __user *context;
+};
+
+#define USBDEVFS_MAXDRIVERNAME 255
+
+struct usbdevfs_getdriver {
+	unsigned int interface;
+	char driver[USBDEVFS_MAXDRIVERNAME + 1];
+};
+
+struct usbdevfs_connectinfo {
+	unsigned int devnum;
+	unsigned char slow;
+};
+
+struct usbdevfs_conninfo_ex {
+	__u32 size;		/* Size of the structure from the kernel's */
+				/* point of view. Can be used by userspace */
+				/* to determine how much data can be       */
+				/* used/trusted.                           */
+	__u32 busnum;           /* USB bus number, as enumerated by the    */
+				/* kernel, the device is connected to.     */
+	__u32 devnum;           /* Device address on the bus.              */
+	__u32 speed;		/* USB_SPEED_* constants from ch9.h        */
+	__u8 num_ports;		/* Number of ports the device is connected */
+				/* to on the way to the root hub. It may   */
+				/* be bigger than size of 'ports' array so */
+				/* userspace can detect overflows.         */
+	__u8 ports[7];		/* List of ports on the way from the root  */
+				/* hub to the device. Current limit in     */
+				/* USB specification is 7 tiers (root hub, */
+				/* 5 intermediate hubs, device), which     */
+				/* gives at most 6 port entries.           */
+};
+
+#define USBDEVFS_URB_SHORT_NOT_OK	0x01
+#define USBDEVFS_URB_ISO_ASAP		0x02
+#define USBDEVFS_URB_BULK_CONTINUATION	0x04
+#define USBDEVFS_URB_NO_FSBR		0x20	/* Not used */
+#define USBDEVFS_URB_ZERO_PACKET	0x40
+#define USBDEVFS_URB_NO_INTERRUPT	0x80
+
+#define USBDEVFS_URB_TYPE_ISO		   0
+#define USBDEVFS_URB_TYPE_INTERRUPT	   1
+#define USBDEVFS_URB_TYPE_CONTROL	   2
+#define USBDEVFS_URB_TYPE_BULK		   3
+
+struct usbdevfs_iso_packet_desc {
+	unsigned int length;
+	unsigned int actual_length;
+	unsigned int status;
+};
+
+struct usbdevfs_urb {
+	unsigned char type;
+	unsigned char endpoint;
+	int status;
+	unsigned int flags;
+	void __user *buffer;
+	int buffer_length;
+	int actual_length;
+	int start_frame;
+	union {
+		int number_of_packets;	/* Only used for isoc urbs */
+		unsigned int stream_id;	/* Only used with bulk streams */
+	};
+	int error_count;
+	unsigned int signr;	/* signal to be sent on completion,
+				  or 0 if none should be sent. */
+	void __user *usercontext;
+	struct usbdevfs_iso_packet_desc iso_frame_desc[];
+};
+
+/* ioctls for talking directly to drivers */
+struct usbdevfs_ioctl {
+	int	ifno;		/* interface 0..N ; negative numbers reserved */
+	int	ioctl_code;	/* MUST encode size + direction of data so the
+				 * macros in <asm/ioctl.h> give correct values */
+	void __user *data;	/* param buffer (in, or out) */
+};
+
+/* You can do most things with hubs just through control messages,
+ * except find out what device connects to what port. */
+struct usbdevfs_hub_portinfo {
+	char nports;		/* number of downstream ports in this hub */
+	char port [127];	/* e.g. port 3 connects to device 27 */
+};
+
+/* System and bus capability flags */
+#define USBDEVFS_CAP_ZERO_PACKET		0x01
+#define USBDEVFS_CAP_BULK_CONTINUATION		0x02
+#define USBDEVFS_CAP_NO_PACKET_SIZE_LIM		0x04
+#define USBDEVFS_CAP_BULK_SCATTER_GATHER	0x08
+#define USBDEVFS_CAP_REAP_AFTER_DISCONNECT	0x10
+#define USBDEVFS_CAP_MMAP			0x20
+#define USBDEVFS_CAP_DROP_PRIVILEGES		0x40
+#define USBDEVFS_CAP_CONNINFO_EX		0x80
+#define USBDEVFS_CAP_SUSPEND			0x100
+
+/* USBDEVFS_DISCONNECT_CLAIM flags & struct */
+
+/* disconnect-and-claim if the driver matches the driver field */
+#define USBDEVFS_DISCONNECT_CLAIM_IF_DRIVER	0x01
+/* disconnect-and-claim except when the driver matches the driver field */
+#define USBDEVFS_DISCONNECT_CLAIM_EXCEPT_DRIVER	0x02
+
+struct usbdevfs_disconnect_claim {
+	unsigned int interface;
+	unsigned int flags;
+	char driver[USBDEVFS_MAXDRIVERNAME + 1];
+};
+
+struct usbdevfs_streams {
+	unsigned int num_streams; /* Not used by USBDEVFS_FREE_STREAMS */
+	unsigned int num_eps;
+	unsigned char eps[];
+};
+
+/*
+ * USB_SPEED_* values returned by USBDEVFS_GET_SPEED are defined in
+ * linux/usb/ch9.h
+ */
+
+#define USBDEVFS_CONTROL           _IOWR('U', 0, struct usbdevfs_ctrltransfer)
+#define USBDEVFS_CONTROL32           _IOWR('U', 0, struct usbdevfs_ctrltransfer32)
+#define USBDEVFS_BULK              _IOWR('U', 2, struct usbdevfs_bulktransfer)
+#define USBDEVFS_BULK32              _IOWR('U', 2, struct usbdevfs_bulktransfer32)
+#define USBDEVFS_RESETEP           _IOR('U', 3, unsigned int)
+#define USBDEVFS_SETINTERFACE      _IOR('U', 4, struct usbdevfs_setinterface)
+#define USBDEVFS_SETCONFIGURATION  _IOR('U', 5, unsigned int)
+#define USBDEVFS_GETDRIVER         _IOW('U', 8, struct usbdevfs_getdriver)
+#define USBDEVFS_SUBMITURB         _IOR('U', 10, struct usbdevfs_urb)
+#define USBDEVFS_SUBMITURB32       _IOR('U', 10, struct usbdevfs_urb32)
+#define USBDEVFS_DISCARDURB        _IO('U', 11)
+#define USBDEVFS_REAPURB           _IOW('U', 12, void *)
+#define USBDEVFS_REAPURB32         _IOW('U', 12, __u32)
+#define USBDEVFS_REAPURBNDELAY     _IOW('U', 13, void *)
+#define USBDEVFS_REAPURBNDELAY32   _IOW('U', 13, __u32)
+#define USBDEVFS_DISCSIGNAL        _IOR('U', 14, struct usbdevfs_disconnectsignal)
+#define USBDEVFS_DISCSIGNAL32      _IOR('U', 14, struct usbdevfs_disconnectsignal32)
+#define USBDEVFS_CLAIMINTERFACE    _IOR('U', 15, unsigned int)
+#define USBDEVFS_RELEASEINTERFACE  _IOR('U', 16, unsigned int)
+#define USBDEVFS_CONNECTINFO       _IOW('U', 17, struct usbdevfs_connectinfo)
+#define USBDEVFS_IOCTL             _IOWR('U', 18, struct usbdevfs_ioctl)
+#define USBDEVFS_IOCTL32           _IOWR('U', 18, struct usbdevfs_ioctl32)
+#define USBDEVFS_HUB_PORTINFO      _IOR('U', 19, struct usbdevfs_hub_portinfo)
+#define USBDEVFS_RESET             _IO('U', 20)
+#define USBDEVFS_CLEAR_HALT        _IOR('U', 21, unsigned int)
+#define USBDEVFS_DISCONNECT        _IO('U', 22)
+#define USBDEVFS_CONNECT           _IO('U', 23)
+#define USBDEVFS_CLAIM_PORT        _IOR('U', 24, unsigned int)
+#define USBDEVFS_RELEASE_PORT      _IOR('U', 25, unsigned int)
+#define USBDEVFS_GET_CAPABILITIES  _IOR('U', 26, __u32)
+#define USBDEVFS_DISCONNECT_CLAIM  _IOR('U', 27, struct usbdevfs_disconnect_claim)
+#define USBDEVFS_ALLOC_STREAMS     _IOR('U', 28, struct usbdevfs_streams)
+#define USBDEVFS_FREE_STREAMS      _IOR('U', 29, struct usbdevfs_streams)
+#define USBDEVFS_DROP_PRIVILEGES   _IOW('U', 30, __u32)
+#define USBDEVFS_GET_SPEED         _IO('U', 31)
+/*
+ * Returns struct usbdevfs_conninfo_ex; length is variable to allow
+ * extending size of the data returned.
+ */
+#define USBDEVFS_CONNINFO_EX(len)  _IOC(_IOC_READ, 'U', 32, len)
+#define USBDEVFS_FORBID_SUSPEND    _IO('U', 33)
+#define USBDEVFS_ALLOW_SUSPEND     _IO('U', 34)
+#define USBDEVFS_WAIT_FOR_RESUME   _IO('U', 35)
+
+#endif /* _UAPI_LINUX_USBDEVICE_FS_H */
diff --git a/tools/perf/trace/beauty/include/uapi/linux/vhost.h b/tools/perf/trace/beauty/include/uapi/linux/vhost.h
new file mode 100644
index 000000000..c57674a6a
--- /dev/null
+++ b/tools/perf/trace/beauty/include/uapi/linux/vhost.h
@@ -0,0 +1,273 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _LINUX_VHOST_H
+#define _LINUX_VHOST_H
+/* Userspace interface for in-kernel virtio accelerators. */
+
+/* vhost is used to reduce the number of system calls involved in virtio.
+ *
+ * Existing virtio net code is used in the guest without modification.
+ *
+ * This header includes interface used by userspace hypervisor for
+ * device configuration.
+ */
+
+#include <linux/vhost_types.h>
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define VHOST_FILE_UNBIND -1
+
+/* ioctls */
+
+#define VHOST_VIRTIO 0xAF
+
+/* Features bitmask for forward compatibility.  Transport bits are used for
+ * vhost specific features. */
+#define VHOST_GET_FEATURES	_IOR(VHOST_VIRTIO, 0x00, __u64)
+#define VHOST_SET_FEATURES	_IOW(VHOST_VIRTIO, 0x00, __u64)
+
+/* Set current process as the (exclusive) owner of this file descriptor.  This
+ * must be called before any other vhost command.  Further calls to
+ * VHOST_SET_OWNER fail until VHOST_RESET_OWNER is called. */
+#define VHOST_SET_OWNER _IO(VHOST_VIRTIO, 0x01)
+/* Give up ownership, and reset the device to default values.
+ * Allows subsequent call to VHOST_SET_OWNER to succeed. */
+#define VHOST_RESET_OWNER _IO(VHOST_VIRTIO, 0x02)
+
+/* Set up/modify memory layout */
+#define VHOST_SET_MEM_TABLE	_IOW(VHOST_VIRTIO, 0x03, struct vhost_memory)
+
+/* Write logging setup. */
+/* Memory writes can optionally be logged by setting bit at an offset
+ * (calculated from the physical address) from specified log base.
+ * The bit is set using an atomic 32 bit operation. */
+/* Set base address for logging. */
+#define VHOST_SET_LOG_BASE _IOW(VHOST_VIRTIO, 0x04, __u64)
+/* Specify an eventfd file descriptor to signal on log write. */
+#define VHOST_SET_LOG_FD _IOW(VHOST_VIRTIO, 0x07, int)
+/* By default, a device gets one vhost_worker that its virtqueues share. This
+ * command allows the owner of the device to create an additional vhost_worker
+ * for the device. It can later be bound to 1 or more of its virtqueues using
+ * the VHOST_ATTACH_VRING_WORKER command.
+ *
+ * This must be called after VHOST_SET_OWNER and the caller must be the owner
+ * of the device. The new thread will inherit caller's cgroups and namespaces,
+ * and will share the caller's memory space. The new thread will also be
+ * counted against the caller's RLIMIT_NPROC value.
+ *
+ * The worker's ID used in other commands will be returned in
+ * vhost_worker_state.
+ */
+#define VHOST_NEW_WORKER _IOR(VHOST_VIRTIO, 0x8, struct vhost_worker_state)
+/* Free a worker created with VHOST_NEW_WORKER if it's not attached to any
+ * virtqueue. If userspace is not able to call this for workers its created,
+ * the kernel will free all the device's workers when the device is closed.
+ */
+#define VHOST_FREE_WORKER _IOW(VHOST_VIRTIO, 0x9, struct vhost_worker_state)
+
+/* Ring setup. */
+/* Set number of descriptors in ring. This parameter can not
+ * be modified while ring is running (bound to a device). */
+#define VHOST_SET_VRING_NUM _IOW(VHOST_VIRTIO, 0x10, struct vhost_vring_state)
+/* Set addresses for the ring. */
+#define VHOST_SET_VRING_ADDR _IOW(VHOST_VIRTIO, 0x11, struct vhost_vring_addr)
+/* Base value where queue looks for available descriptors */
+#define VHOST_SET_VRING_BASE _IOW(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
+/* Get accessor: reads index, writes value in num */
+#define VHOST_GET_VRING_BASE _IOWR(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
+
+/* Set the vring byte order in num. Valid values are VHOST_VRING_LITTLE_ENDIAN
+ * or VHOST_VRING_BIG_ENDIAN (other values return -EINVAL).
+ * The byte order cannot be changed while the device is active: trying to do so
+ * returns -EBUSY.
+ * This is a legacy only API that is simply ignored when VIRTIO_F_VERSION_1 is
+ * set.
+ * Not all kernel configurations support this ioctl, but all configurations that
+ * support SET also support GET.
+ */
+#define VHOST_VRING_LITTLE_ENDIAN 0
+#define VHOST_VRING_BIG_ENDIAN 1
+#define VHOST_SET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x13, struct vhost_vring_state)
+#define VHOST_GET_VRING_ENDIAN _IOW(VHOST_VIRTIO, 0x14, struct vhost_vring_state)
+/* Attach a vhost_worker created with VHOST_NEW_WORKER to one of the device's
+ * virtqueues.
+ *
+ * This will replace the virtqueue's existing worker. If the replaced worker
+ * is no longer attached to any virtqueues, it can be freed with
+ * VHOST_FREE_WORKER.
+ */
+#define VHOST_ATTACH_VRING_WORKER _IOW(VHOST_VIRTIO, 0x15,		\
+				       struct vhost_vring_worker)
+/* Return the vring worker's ID */
+#define VHOST_GET_VRING_WORKER _IOWR(VHOST_VIRTIO, 0x16,		\
+				     struct vhost_vring_worker)
+
+/* The following ioctls use eventfd file descriptors to signal and poll
+ * for events. */
+
+/* Set eventfd to poll for added buffers */
+#define VHOST_SET_VRING_KICK _IOW(VHOST_VIRTIO, 0x20, struct vhost_vring_file)
+/* Set eventfd to signal when buffers have beed used */
+#define VHOST_SET_VRING_CALL _IOW(VHOST_VIRTIO, 0x21, struct vhost_vring_file)
+/* Set eventfd to signal an error */
+#define VHOST_SET_VRING_ERR _IOW(VHOST_VIRTIO, 0x22, struct vhost_vring_file)
+/* Set busy loop timeout (in us) */
+#define VHOST_SET_VRING_BUSYLOOP_TIMEOUT _IOW(VHOST_VIRTIO, 0x23,	\
+					 struct vhost_vring_state)
+/* Get busy loop timeout (in us) */
+#define VHOST_GET_VRING_BUSYLOOP_TIMEOUT _IOW(VHOST_VIRTIO, 0x24,	\
+					 struct vhost_vring_state)
+
+/* Set or get vhost backend capability */
+
+#define VHOST_SET_BACKEND_FEATURES _IOW(VHOST_VIRTIO, 0x25, __u64)
+#define VHOST_GET_BACKEND_FEATURES _IOR(VHOST_VIRTIO, 0x26, __u64)
+
+/* VHOST_NET specific defines */
+
+/* Attach virtio net ring to a raw socket, or tap device.
+ * The socket must be already bound to an ethernet device, this device will be
+ * used for transmit.  Pass fd -1 to unbind from the socket and the transmit
+ * device.  This can be used to stop the ring (e.g. for migration). */
+#define VHOST_NET_SET_BACKEND _IOW(VHOST_VIRTIO, 0x30, struct vhost_vring_file)
+
+/* VHOST_SCSI specific defines */
+
+#define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target)
+#define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target)
+/* Changing this breaks userspace. */
+#define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, int)
+/* Set and get the events missed flag */
+#define VHOST_SCSI_SET_EVENTS_MISSED _IOW(VHOST_VIRTIO, 0x43, __u32)
+#define VHOST_SCSI_GET_EVENTS_MISSED _IOW(VHOST_VIRTIO, 0x44, __u32)
+
+/* VHOST_VSOCK specific defines */
+
+#define VHOST_VSOCK_SET_GUEST_CID	_IOW(VHOST_VIRTIO, 0x60, __u64)
+#define VHOST_VSOCK_SET_RUNNING		_IOW(VHOST_VIRTIO, 0x61, int)
+
+/* VHOST_VDPA specific defines */
+
+/* Get the device id. The device ids follow the same definition of
+ * the device id defined in virtio-spec.
+ */
+#define VHOST_VDPA_GET_DEVICE_ID	_IOR(VHOST_VIRTIO, 0x70, __u32)
+/* Get and set the status. The status bits follow the same definition
+ * of the device status defined in virtio-spec.
+ */
+#define VHOST_VDPA_GET_STATUS		_IOR(VHOST_VIRTIO, 0x71, __u8)
+#define VHOST_VDPA_SET_STATUS		_IOW(VHOST_VIRTIO, 0x72, __u8)
+/* Get and set the device config. The device config follows the same
+ * definition of the device config defined in virtio-spec.
+ */
+#define VHOST_VDPA_GET_CONFIG		_IOR(VHOST_VIRTIO, 0x73, \
+					     struct vhost_vdpa_config)
+#define VHOST_VDPA_SET_CONFIG		_IOW(VHOST_VIRTIO, 0x74, \
+					     struct vhost_vdpa_config)
+/* Enable/disable the ring. */
+#define VHOST_VDPA_SET_VRING_ENABLE	_IOW(VHOST_VIRTIO, 0x75, \
+					     struct vhost_vring_state)
+/* Get the max ring size. */
+#define VHOST_VDPA_GET_VRING_NUM	_IOR(VHOST_VIRTIO, 0x76, __u16)
+
+/* Set event fd for config interrupt*/
+#define VHOST_VDPA_SET_CONFIG_CALL	_IOW(VHOST_VIRTIO, 0x77, int)
+
+/* Get the valid iova range */
+#define VHOST_VDPA_GET_IOVA_RANGE	_IOR(VHOST_VIRTIO, 0x78, \
+					     struct vhost_vdpa_iova_range)
+/* Get the config size */
+#define VHOST_VDPA_GET_CONFIG_SIZE	_IOR(VHOST_VIRTIO, 0x79, __u32)
+
+/* Get the number of address spaces. */
+#define VHOST_VDPA_GET_AS_NUM		_IOR(VHOST_VIRTIO, 0x7A, unsigned int)
+
+/* Get the group for a virtqueue: read index, write group in num,
+ * The virtqueue index is stored in the index field of
+ * vhost_vring_state. The group for this specific virtqueue is
+ * returned via num field of vhost_vring_state.
+ */
+#define VHOST_VDPA_GET_VRING_GROUP	_IOWR(VHOST_VIRTIO, 0x7B,	\
+					      struct vhost_vring_state)
+/* Set the ASID for a virtqueue group. The group index is stored in
+ * the index field of vhost_vring_state, the ASID associated with this
+ * group is stored at num field of vhost_vring_state.
+ */
+#define VHOST_VDPA_SET_GROUP_ASID	_IOW(VHOST_VIRTIO, 0x7C, \
+					     struct vhost_vring_state)
+
+/* Suspend a device so it does not process virtqueue requests anymore
+ *
+ * After the return of ioctl the device must preserve all the necessary state
+ * (the virtqueue vring base plus the possible device specific states) that is
+ * required for restoring in the future. The device must not change its
+ * configuration after that point.
+ */
+#define VHOST_VDPA_SUSPEND		_IO(VHOST_VIRTIO, 0x7D)
+
+/* Resume a device so it can resume processing virtqueue requests
+ *
+ * After the return of this ioctl the device will have restored all the
+ * necessary states and it is fully operational to continue processing the
+ * virtqueue descriptors.
+ */
+#define VHOST_VDPA_RESUME		_IO(VHOST_VIRTIO, 0x7E)
+
+/* Get the group for the descriptor table including driver & device areas
+ * of a virtqueue: read index, write group in num.
+ * The virtqueue index is stored in the index field of vhost_vring_state.
+ * The group ID of the descriptor table for this specific virtqueue
+ * is returned via num field of vhost_vring_state.
+ */
+#define VHOST_VDPA_GET_VRING_DESC_GROUP	_IOWR(VHOST_VIRTIO, 0x7F,	\
+					      struct vhost_vring_state)
+
+
+/* Get the count of all virtqueues */
+#define VHOST_VDPA_GET_VQS_COUNT	_IOR(VHOST_VIRTIO, 0x80, __u32)
+
+/* Get the number of virtqueue groups. */
+#define VHOST_VDPA_GET_GROUP_NUM	_IOR(VHOST_VIRTIO, 0x81, __u32)
+
+/* Get the queue size of a specific virtqueue.
+ * userspace set the vring index in vhost_vring_state.index
+ * kernel set the queue size in vhost_vring_state.num
+ */
+#define VHOST_VDPA_GET_VRING_SIZE	_IOWR(VHOST_VIRTIO, 0x82,	\
+					      struct vhost_vring_state)
+
+/* Extended features manipulation */
+#define VHOST_GET_FEATURES_ARRAY _IOR(VHOST_VIRTIO, 0x83, \
+				       struct vhost_features_array)
+#define VHOST_SET_FEATURES_ARRAY _IOW(VHOST_VIRTIO, 0x83, \
+				       struct vhost_features_array)
+
+/* fork_owner values for vhost */
+#define VHOST_FORK_OWNER_KTHREAD 0
+#define VHOST_FORK_OWNER_TASK 1
+
+/**
+ * VHOST_SET_FORK_FROM_OWNER - Set the fork_owner flag for the vhost device,
+ * This ioctl must called before VHOST_SET_OWNER.
+ * Only available when CONFIG_VHOST_ENABLE_FORK_OWNER_CONTROL=y
+ *
+ * @param fork_owner: An 8-bit value that determines the vhost thread mode
+ *
+ * When fork_owner is set to VHOST_FORK_OWNER_TASK(default value):
+ *   - Vhost will create vhost worker as tasks forked from the owner,
+ *     inheriting all of the owner's attributes.
+ *
+ * When fork_owner is set to VHOST_FORK_OWNER_KTHREAD:
+ *   - Vhost will create vhost workers as kernel threads.
+ */
+#define VHOST_SET_FORK_FROM_OWNER _IOW(VHOST_VIRTIO, 0x84, __u8)
+
+/**
+ * VHOST_GET_FORK_OWNER - Get the current fork_owner flag for the vhost device.
+ * Only available when CONFIG_VHOST_ENABLE_FORK_OWNER_CONTROL=y
+ *
+ * @return: An 8-bit value indicating the current thread mode.
+ */
+#define VHOST_GET_FORK_FROM_OWNER _IOR(VHOST_VIRTIO, 0x85, __u8)
+
+#endif
diff --git a/tools/perf/trace/beauty/include/uapi/sound/asound.h b/tools/perf/trace/beauty/include/uapi/sound/asound.h
new file mode 100644
index 000000000..d3ce75ba9
--- /dev/null
+++ b/tools/perf/trace/beauty/include/uapi/sound/asound.h
@@ -0,0 +1,1272 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ *  Advanced Linux Sound Architecture - ALSA - Driver
+ *  Copyright (c) 1994-2003 by Jaroslav Kysela <perex@perex.cz>,
+ *                             Abramo Bagnara <abramo@alsa-project.org>
+ */
+
+#ifndef _UAPI__SOUND_ASOUND_H
+#define _UAPI__SOUND_ASOUND_H
+
+#if defined(__KERNEL__) || defined(__linux__)
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#else
+#include <endian.h>
+#include <sys/ioctl.h>
+#endif
+
+#ifndef __KERNEL__
+#include <stdlib.h>
+#include <time.h>
+#endif
+
+/*
+ *  protocol version
+ */
+
+#define SNDRV_PROTOCOL_VERSION(major, minor, subminor) (((major)<<16)|((minor)<<8)|(subminor))
+#define SNDRV_PROTOCOL_MAJOR(version) (((version)>>16)&0xffff)
+#define SNDRV_PROTOCOL_MINOR(version) (((version)>>8)&0xff)
+#define SNDRV_PROTOCOL_MICRO(version) ((version)&0xff)
+#define SNDRV_PROTOCOL_INCOMPATIBLE(kversion, uversion) \
+	(SNDRV_PROTOCOL_MAJOR(kversion) != SNDRV_PROTOCOL_MAJOR(uversion) || \
+	 (SNDRV_PROTOCOL_MAJOR(kversion) == SNDRV_PROTOCOL_MAJOR(uversion) && \
+	   SNDRV_PROTOCOL_MINOR(kversion) != SNDRV_PROTOCOL_MINOR(uversion)))
+
+/****************************************************************************
+ *                                                                          *
+ *        Digital audio interface					    *
+ *                                                                          *
+ ****************************************************************************/
+
+#define AES_IEC958_STATUS_SIZE		24
+
+struct snd_aes_iec958 {
+	unsigned char status[AES_IEC958_STATUS_SIZE]; /* AES/IEC958 channel status bits */
+	unsigned char subcode[147];	/* AES/IEC958 subcode bits */
+	unsigned char pad;		/* nothing */
+	unsigned char dig_subframe[4];	/* AES/IEC958 subframe bits */
+};
+
+/****************************************************************************
+ *                                                                          *
+ *        CEA-861 Audio InfoFrame. Used in HDMI and DisplayPort		    *
+ *                                                                          *
+ ****************************************************************************/
+
+struct snd_cea_861_aud_if {
+	unsigned char db1_ct_cc; /* coding type and channel count */
+	unsigned char db2_sf_ss; /* sample frequency and size */
+	unsigned char db3; /* not used, all zeros */
+	unsigned char db4_ca; /* channel allocation code */
+	unsigned char db5_dminh_lsv; /* downmix inhibit & level-shift values */
+};
+
+/****************************************************************************
+ *                                                                          *
+ *      Section for driver hardware dependent interface - /dev/snd/hw?      *
+ *                                                                          *
+ ****************************************************************************/
+
+#define SNDRV_HWDEP_VERSION		SNDRV_PROTOCOL_VERSION(1, 0, 1)
+
+enum {
+	SNDRV_HWDEP_IFACE_OPL2 = 0,
+	SNDRV_HWDEP_IFACE_OPL3,
+	SNDRV_HWDEP_IFACE_OPL4,
+	SNDRV_HWDEP_IFACE_SB16CSP,	/* Creative Signal Processor */
+	SNDRV_HWDEP_IFACE_EMU10K1,	/* FX8010 processor in EMU10K1 chip */
+	SNDRV_HWDEP_IFACE_YSS225,	/* Yamaha FX processor */
+	SNDRV_HWDEP_IFACE_ICS2115,	/* Wavetable synth */
+	SNDRV_HWDEP_IFACE_SSCAPE,	/* Ensoniq SoundScape ISA card (MC68EC000) */
+	SNDRV_HWDEP_IFACE_VX,		/* Digigram VX cards */
+	SNDRV_HWDEP_IFACE_MIXART,	/* Digigram miXart cards */
+	SNDRV_HWDEP_IFACE_USX2Y,	/* Tascam US122, US224 & US428 usb */
+	SNDRV_HWDEP_IFACE_EMUX_WAVETABLE, /* EmuX wavetable */
+	SNDRV_HWDEP_IFACE_BLUETOOTH,	/* Bluetooth audio */
+	SNDRV_HWDEP_IFACE_USX2Y_PCM,	/* Tascam US122, US224 & US428 rawusb pcm */
+	SNDRV_HWDEP_IFACE_PCXHR,	/* Digigram PCXHR */
+	SNDRV_HWDEP_IFACE_SB_RC,	/* SB Extigy/Audigy2NX remote control */
+	SNDRV_HWDEP_IFACE_HDA,		/* HD-audio */
+	SNDRV_HWDEP_IFACE_USB_STREAM,	/* direct access to usb stream */
+	SNDRV_HWDEP_IFACE_FW_DICE,	/* TC DICE FireWire device */
+	SNDRV_HWDEP_IFACE_FW_FIREWORKS,	/* Echo Audio Fireworks based device */
+	SNDRV_HWDEP_IFACE_FW_BEBOB,	/* BridgeCo BeBoB based device */
+	SNDRV_HWDEP_IFACE_FW_OXFW,	/* Oxford OXFW970/971 based device */
+	SNDRV_HWDEP_IFACE_FW_DIGI00X,	/* Digidesign Digi 002/003 family */
+	SNDRV_HWDEP_IFACE_FW_TASCAM,	/* TASCAM FireWire series */
+	SNDRV_HWDEP_IFACE_LINE6,	/* Line6 USB processors */
+	SNDRV_HWDEP_IFACE_FW_MOTU,	/* MOTU FireWire series */
+	SNDRV_HWDEP_IFACE_FW_FIREFACE,	/* RME Fireface series */
+
+	/* Don't forget to change the following: */
+	SNDRV_HWDEP_IFACE_LAST = SNDRV_HWDEP_IFACE_FW_FIREFACE
+};
+
+struct snd_hwdep_info {
+	unsigned int device;		/* WR: device number */
+	int card;			/* R: card number */
+	unsigned char id[64];		/* ID (user selectable) */
+	unsigned char name[80];		/* hwdep name */
+	int iface;			/* hwdep interface */
+	unsigned char reserved[64];	/* reserved for future */
+};
+
+/* generic DSP loader */
+struct snd_hwdep_dsp_status {
+	unsigned int version;		/* R: driver-specific version */
+	unsigned char id[32];		/* R: driver-specific ID string */
+	unsigned int num_dsps;		/* R: number of DSP images to transfer */
+	unsigned int dsp_loaded;	/* R: bit flags indicating the loaded DSPs */
+	unsigned int chip_ready;	/* R: 1 = initialization finished */
+	unsigned char reserved[16];	/* reserved for future use */
+};
+
+struct snd_hwdep_dsp_image {
+	unsigned int index;		/* W: DSP index */
+	unsigned char name[64];		/* W: ID (e.g. file name) */
+	unsigned char __user *image;	/* W: binary image */
+	size_t length;			/* W: size of image in bytes */
+	unsigned long driver_data;	/* W: driver-specific data */
+};
+
+#define SNDRV_HWDEP_IOCTL_PVERSION	_IOR ('H', 0x00, int)
+#define SNDRV_HWDEP_IOCTL_INFO		_IOR ('H', 0x01, struct snd_hwdep_info)
+#define SNDRV_HWDEP_IOCTL_DSP_STATUS	_IOR('H', 0x02, struct snd_hwdep_dsp_status)
+#define SNDRV_HWDEP_IOCTL_DSP_LOAD	_IOW('H', 0x03, struct snd_hwdep_dsp_image)
+
+/*****************************************************************************
+ *                                                                           *
+ *             Digital Audio (PCM) interface - /dev/snd/pcm??                *
+ *                                                                           *
+ *****************************************************************************/
+
+#define SNDRV_PCM_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 18)
+
+typedef unsigned long snd_pcm_uframes_t;
+typedef signed long snd_pcm_sframes_t;
+
+enum {
+	SNDRV_PCM_CLASS_GENERIC = 0,	/* standard mono or stereo device */
+	SNDRV_PCM_CLASS_MULTI,		/* multichannel device */
+	SNDRV_PCM_CLASS_MODEM,		/* software modem class */
+	SNDRV_PCM_CLASS_DIGITIZER,	/* digitizer class */
+	/* Don't forget to change the following: */
+	SNDRV_PCM_CLASS_LAST = SNDRV_PCM_CLASS_DIGITIZER,
+};
+
+enum {
+	SNDRV_PCM_SUBCLASS_GENERIC_MIX = 0, /* mono or stereo subdevices are mixed together */
+	SNDRV_PCM_SUBCLASS_MULTI_MIX,	/* multichannel subdevices are mixed together */
+	/* Don't forget to change the following: */
+	SNDRV_PCM_SUBCLASS_LAST = SNDRV_PCM_SUBCLASS_MULTI_MIX,
+};
+
+enum {
+	SNDRV_PCM_STREAM_PLAYBACK = 0,
+	SNDRV_PCM_STREAM_CAPTURE,
+	SNDRV_PCM_STREAM_LAST = SNDRV_PCM_STREAM_CAPTURE,
+};
+
+typedef int __bitwise snd_pcm_access_t;
+#define	SNDRV_PCM_ACCESS_MMAP_INTERLEAVED	((__force snd_pcm_access_t) 0) /* interleaved mmap */
+#define	SNDRV_PCM_ACCESS_MMAP_NONINTERLEAVED	((__force snd_pcm_access_t) 1) /* noninterleaved mmap */
+#define	SNDRV_PCM_ACCESS_MMAP_COMPLEX		((__force snd_pcm_access_t) 2) /* complex mmap */
+#define	SNDRV_PCM_ACCESS_RW_INTERLEAVED		((__force snd_pcm_access_t) 3) /* readi/writei */
+#define	SNDRV_PCM_ACCESS_RW_NONINTERLEAVED	((__force snd_pcm_access_t) 4) /* readn/writen */
+#define	SNDRV_PCM_ACCESS_LAST		SNDRV_PCM_ACCESS_RW_NONINTERLEAVED
+
+typedef int __bitwise snd_pcm_format_t;
+#define	SNDRV_PCM_FORMAT_S8	((__force snd_pcm_format_t) 0)
+#define	SNDRV_PCM_FORMAT_U8	((__force snd_pcm_format_t) 1)
+#define	SNDRV_PCM_FORMAT_S16_LE	((__force snd_pcm_format_t) 2)
+#define	SNDRV_PCM_FORMAT_S16_BE	((__force snd_pcm_format_t) 3)
+#define	SNDRV_PCM_FORMAT_U16_LE	((__force snd_pcm_format_t) 4)
+#define	SNDRV_PCM_FORMAT_U16_BE	((__force snd_pcm_format_t) 5)
+#define	SNDRV_PCM_FORMAT_S24_LE	((__force snd_pcm_format_t) 6) /* low three bytes */
+#define	SNDRV_PCM_FORMAT_S24_BE	((__force snd_pcm_format_t) 7) /* low three bytes */
+#define	SNDRV_PCM_FORMAT_U24_LE	((__force snd_pcm_format_t) 8) /* low three bytes */
+#define	SNDRV_PCM_FORMAT_U24_BE	((__force snd_pcm_format_t) 9) /* low three bytes */
+/*
+ * For S32/U32 formats, 'msbits' hardware parameter is often used to deliver information about the
+ * available bit count in most significant bit. It's for the case of so-called 'left-justified' or
+ * `right-padding` sample which has less width than 32 bit.
+ */
+#define	SNDRV_PCM_FORMAT_S32_LE	((__force snd_pcm_format_t) 10)
+#define	SNDRV_PCM_FORMAT_S32_BE	((__force snd_pcm_format_t) 11)
+#define	SNDRV_PCM_FORMAT_U32_LE	((__force snd_pcm_format_t) 12)
+#define	SNDRV_PCM_FORMAT_U32_BE	((__force snd_pcm_format_t) 13)
+#define	SNDRV_PCM_FORMAT_FLOAT_LE	((__force snd_pcm_format_t) 14) /* 4-byte float, IEEE-754 32-bit, range -1.0 to 1.0 */
+#define	SNDRV_PCM_FORMAT_FLOAT_BE	((__force snd_pcm_format_t) 15) /* 4-byte float, IEEE-754 32-bit, range -1.0 to 1.0 */
+#define	SNDRV_PCM_FORMAT_FLOAT64_LE	((__force snd_pcm_format_t) 16) /* 8-byte float, IEEE-754 64-bit, range -1.0 to 1.0 */
+#define	SNDRV_PCM_FORMAT_FLOAT64_BE	((__force snd_pcm_format_t) 17) /* 8-byte float, IEEE-754 64-bit, range -1.0 to 1.0 */
+#define	SNDRV_PCM_FORMAT_IEC958_SUBFRAME_LE ((__force snd_pcm_format_t) 18) /* IEC-958 subframe, Little Endian */
+#define	SNDRV_PCM_FORMAT_IEC958_SUBFRAME_BE ((__force snd_pcm_format_t) 19) /* IEC-958 subframe, Big Endian */
+#define	SNDRV_PCM_FORMAT_MU_LAW		((__force snd_pcm_format_t) 20)
+#define	SNDRV_PCM_FORMAT_A_LAW		((__force snd_pcm_format_t) 21)
+#define	SNDRV_PCM_FORMAT_IMA_ADPCM	((__force snd_pcm_format_t) 22)
+#define	SNDRV_PCM_FORMAT_MPEG		((__force snd_pcm_format_t) 23)
+#define	SNDRV_PCM_FORMAT_GSM		((__force snd_pcm_format_t) 24)
+#define	SNDRV_PCM_FORMAT_S20_LE	((__force snd_pcm_format_t) 25) /* in four bytes, LSB justified */
+#define	SNDRV_PCM_FORMAT_S20_BE	((__force snd_pcm_format_t) 26) /* in four bytes, LSB justified */
+#define	SNDRV_PCM_FORMAT_U20_LE	((__force snd_pcm_format_t) 27) /* in four bytes, LSB justified */
+#define	SNDRV_PCM_FORMAT_U20_BE	((__force snd_pcm_format_t) 28) /* in four bytes, LSB justified */
+/* gap in the numbering for a future standard linear format */
+#define	SNDRV_PCM_FORMAT_SPECIAL	((__force snd_pcm_format_t) 31)
+#define	SNDRV_PCM_FORMAT_S24_3LE	((__force snd_pcm_format_t) 32)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_S24_3BE	((__force snd_pcm_format_t) 33)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_U24_3LE	((__force snd_pcm_format_t) 34)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_U24_3BE	((__force snd_pcm_format_t) 35)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_S20_3LE	((__force snd_pcm_format_t) 36)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_S20_3BE	((__force snd_pcm_format_t) 37)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_U20_3LE	((__force snd_pcm_format_t) 38)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_U20_3BE	((__force snd_pcm_format_t) 39)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_S18_3LE	((__force snd_pcm_format_t) 40)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_S18_3BE	((__force snd_pcm_format_t) 41)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_U18_3LE	((__force snd_pcm_format_t) 42)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_U18_3BE	((__force snd_pcm_format_t) 43)	/* in three bytes */
+#define	SNDRV_PCM_FORMAT_G723_24	((__force snd_pcm_format_t) 44) /* 8 samples in 3 bytes */
+#define	SNDRV_PCM_FORMAT_G723_24_1B	((__force snd_pcm_format_t) 45) /* 1 sample in 1 byte */
+#define	SNDRV_PCM_FORMAT_G723_40	((__force snd_pcm_format_t) 46) /* 8 Samples in 5 bytes */
+#define	SNDRV_PCM_FORMAT_G723_40_1B	((__force snd_pcm_format_t) 47) /* 1 sample in 1 byte */
+#define	SNDRV_PCM_FORMAT_DSD_U8		((__force snd_pcm_format_t) 48) /* DSD, 1-byte samples DSD (x8) */
+#define	SNDRV_PCM_FORMAT_DSD_U16_LE	((__force snd_pcm_format_t) 49) /* DSD, 2-byte samples DSD (x16), little endian */
+#define	SNDRV_PCM_FORMAT_DSD_U32_LE	((__force snd_pcm_format_t) 50) /* DSD, 4-byte samples DSD (x32), little endian */
+#define	SNDRV_PCM_FORMAT_DSD_U16_BE	((__force snd_pcm_format_t) 51) /* DSD, 2-byte samples DSD (x16), big endian */
+#define	SNDRV_PCM_FORMAT_DSD_U32_BE	((__force snd_pcm_format_t) 52) /* DSD, 4-byte samples DSD (x32), big endian */
+#define	SNDRV_PCM_FORMAT_LAST		SNDRV_PCM_FORMAT_DSD_U32_BE
+#define	SNDRV_PCM_FORMAT_FIRST		SNDRV_PCM_FORMAT_S8
+
+#ifdef SNDRV_LITTLE_ENDIAN
+#define	SNDRV_PCM_FORMAT_S16		SNDRV_PCM_FORMAT_S16_LE
+#define	SNDRV_PCM_FORMAT_U16		SNDRV_PCM_FORMAT_U16_LE
+#define	SNDRV_PCM_FORMAT_S24		SNDRV_PCM_FORMAT_S24_LE
+#define	SNDRV_PCM_FORMAT_U24		SNDRV_PCM_FORMAT_U24_LE
+#define	SNDRV_PCM_FORMAT_S32		SNDRV_PCM_FORMAT_S32_LE
+#define	SNDRV_PCM_FORMAT_U32		SNDRV_PCM_FORMAT_U32_LE
+#define	SNDRV_PCM_FORMAT_FLOAT		SNDRV_PCM_FORMAT_FLOAT_LE
+#define	SNDRV_PCM_FORMAT_FLOAT64	SNDRV_PCM_FORMAT_FLOAT64_LE
+#define	SNDRV_PCM_FORMAT_IEC958_SUBFRAME SNDRV_PCM_FORMAT_IEC958_SUBFRAME_LE
+#define	SNDRV_PCM_FORMAT_S20		SNDRV_PCM_FORMAT_S20_LE
+#define	SNDRV_PCM_FORMAT_U20		SNDRV_PCM_FORMAT_U20_LE
+#endif
+#ifdef SNDRV_BIG_ENDIAN
+#define	SNDRV_PCM_FORMAT_S16		SNDRV_PCM_FORMAT_S16_BE
+#define	SNDRV_PCM_FORMAT_U16		SNDRV_PCM_FORMAT_U16_BE
+#define	SNDRV_PCM_FORMAT_S24		SNDRV_PCM_FORMAT_S24_BE
+#define	SNDRV_PCM_FORMAT_U24		SNDRV_PCM_FORMAT_U24_BE
+#define	SNDRV_PCM_FORMAT_S32		SNDRV_PCM_FORMAT_S32_BE
+#define	SNDRV_PCM_FORMAT_U32		SNDRV_PCM_FORMAT_U32_BE
+#define	SNDRV_PCM_FORMAT_FLOAT		SNDRV_PCM_FORMAT_FLOAT_BE
+#define	SNDRV_PCM_FORMAT_FLOAT64	SNDRV_PCM_FORMAT_FLOAT64_BE
+#define	SNDRV_PCM_FORMAT_IEC958_SUBFRAME SNDRV_PCM_FORMAT_IEC958_SUBFRAME_BE
+#define	SNDRV_PCM_FORMAT_S20		SNDRV_PCM_FORMAT_S20_BE
+#define	SNDRV_PCM_FORMAT_U20		SNDRV_PCM_FORMAT_U20_BE
+#endif
+
+typedef int __bitwise snd_pcm_subformat_t;
+#define	SNDRV_PCM_SUBFORMAT_STD		((__force snd_pcm_subformat_t) 0)
+#define	SNDRV_PCM_SUBFORMAT_MSBITS_MAX	((__force snd_pcm_subformat_t) 1)
+#define	SNDRV_PCM_SUBFORMAT_MSBITS_20	((__force snd_pcm_subformat_t) 2)
+#define	SNDRV_PCM_SUBFORMAT_MSBITS_24	((__force snd_pcm_subformat_t) 3)
+#define	SNDRV_PCM_SUBFORMAT_LAST	SNDRV_PCM_SUBFORMAT_MSBITS_24
+
+#define SNDRV_PCM_INFO_MMAP		0x00000001	/* hardware supports mmap */
+#define SNDRV_PCM_INFO_MMAP_VALID	0x00000002	/* period data are valid during transfer */
+#define SNDRV_PCM_INFO_DOUBLE		0x00000004	/* Double buffering needed for PCM start/stop */
+#define SNDRV_PCM_INFO_BATCH		0x00000010	/* double buffering */
+#define SNDRV_PCM_INFO_SYNC_APPLPTR	0x00000020	/* need the explicit sync of appl_ptr update */
+#define SNDRV_PCM_INFO_PERFECT_DRAIN	0x00000040	/* silencing at the end of stream is not required */
+#define SNDRV_PCM_INFO_INTERLEAVED	0x00000100	/* channels are interleaved */
+#define SNDRV_PCM_INFO_NONINTERLEAVED	0x00000200	/* channels are not interleaved */
+#define SNDRV_PCM_INFO_COMPLEX		0x00000400	/* complex frame organization (mmap only) */
+#define SNDRV_PCM_INFO_BLOCK_TRANSFER	0x00010000	/* hardware transfer block of samples */
+#define SNDRV_PCM_INFO_OVERRANGE	0x00020000	/* hardware supports ADC (capture) overrange detection */
+#define SNDRV_PCM_INFO_RESUME		0x00040000	/* hardware supports stream resume after suspend */
+#define SNDRV_PCM_INFO_PAUSE		0x00080000	/* pause ioctl is supported */
+#define SNDRV_PCM_INFO_HALF_DUPLEX	0x00100000	/* only half duplex */
+#define SNDRV_PCM_INFO_JOINT_DUPLEX	0x00200000	/* playback and capture stream are somewhat correlated */
+#define SNDRV_PCM_INFO_SYNC_START	0x00400000	/* pcm support some kind of sync go */
+#define SNDRV_PCM_INFO_NO_PERIOD_WAKEUP	0x00800000	/* period wakeup can be disabled */
+#define SNDRV_PCM_INFO_HAS_WALL_CLOCK   0x01000000      /* (Deprecated)has audio wall clock for audio/system time sync */
+#define SNDRV_PCM_INFO_HAS_LINK_ATIME              0x01000000  /* report hardware link audio time, reset on startup */
+#define SNDRV_PCM_INFO_HAS_LINK_ABSOLUTE_ATIME     0x02000000  /* report absolute hardware link audio time, not reset on startup */
+#define SNDRV_PCM_INFO_HAS_LINK_ESTIMATED_ATIME    0x04000000  /* report estimated link audio time */
+#define SNDRV_PCM_INFO_HAS_LINK_SYNCHRONIZED_ATIME 0x08000000  /* report synchronized audio/system time */
+#define SNDRV_PCM_INFO_EXPLICIT_SYNC	0x10000000	/* needs explicit sync of pointers and data */
+#define SNDRV_PCM_INFO_NO_REWINDS	0x20000000	/* hardware can only support monotonic changes of appl_ptr */
+#define SNDRV_PCM_INFO_DRAIN_TRIGGER	0x40000000		/* internal kernel flag - trigger in drain */
+#define SNDRV_PCM_INFO_FIFO_IN_FRAMES	0x80000000	/* internal kernel flag - FIFO size is in frames */
+
+#if (__BITS_PER_LONG == 32 && defined(__USE_TIME_BITS64)) || defined __KERNEL__
+#define __SND_STRUCT_TIME64
+#endif
+
+typedef int __bitwise snd_pcm_state_t;
+#define	SNDRV_PCM_STATE_OPEN		((__force snd_pcm_state_t) 0) /* stream is open */
+#define	SNDRV_PCM_STATE_SETUP		((__force snd_pcm_state_t) 1) /* stream has a setup */
+#define	SNDRV_PCM_STATE_PREPARED	((__force snd_pcm_state_t) 2) /* stream is ready to start */
+#define	SNDRV_PCM_STATE_RUNNING		((__force snd_pcm_state_t) 3) /* stream is running */
+#define	SNDRV_PCM_STATE_XRUN		((__force snd_pcm_state_t) 4) /* stream reached an xrun */
+#define	SNDRV_PCM_STATE_DRAINING	((__force snd_pcm_state_t) 5) /* stream is draining */
+#define	SNDRV_PCM_STATE_PAUSED		((__force snd_pcm_state_t) 6) /* stream is paused */
+#define	SNDRV_PCM_STATE_SUSPENDED	((__force snd_pcm_state_t) 7) /* hardware is suspended */
+#define	SNDRV_PCM_STATE_DISCONNECTED	((__force snd_pcm_state_t) 8) /* hardware is disconnected */
+#define	SNDRV_PCM_STATE_LAST		SNDRV_PCM_STATE_DISCONNECTED
+
+enum {
+	SNDRV_PCM_MMAP_OFFSET_DATA = 0x00000000,
+	SNDRV_PCM_MMAP_OFFSET_STATUS_OLD = 0x80000000,
+	SNDRV_PCM_MMAP_OFFSET_CONTROL_OLD = 0x81000000,
+	SNDRV_PCM_MMAP_OFFSET_STATUS_NEW = 0x82000000,
+	SNDRV_PCM_MMAP_OFFSET_CONTROL_NEW = 0x83000000,
+#ifdef __SND_STRUCT_TIME64
+	SNDRV_PCM_MMAP_OFFSET_STATUS = SNDRV_PCM_MMAP_OFFSET_STATUS_NEW,
+	SNDRV_PCM_MMAP_OFFSET_CONTROL = SNDRV_PCM_MMAP_OFFSET_CONTROL_NEW,
+#else
+	SNDRV_PCM_MMAP_OFFSET_STATUS = SNDRV_PCM_MMAP_OFFSET_STATUS_OLD,
+	SNDRV_PCM_MMAP_OFFSET_CONTROL = SNDRV_PCM_MMAP_OFFSET_CONTROL_OLD,
+#endif
+};
+
+union snd_pcm_sync_id {
+	unsigned char id[16];
+	unsigned short id16[8];
+	unsigned int id32[4];
+} __attribute__((deprecated));
+
+struct snd_pcm_info {
+	unsigned int device;		/* RO/WR (control): device number */
+	unsigned int subdevice;		/* RO/WR (control): subdevice number */
+	int stream;			/* RO/WR (control): stream direction */
+	int card;			/* R: card number */
+	unsigned char id[64];		/* ID (user selectable) */
+	unsigned char name[80];		/* name of this device */
+	unsigned char subname[32];	/* subdevice name */
+	int dev_class;			/* SNDRV_PCM_CLASS_* */
+	int dev_subclass;		/* SNDRV_PCM_SUBCLASS_* */
+	unsigned int subdevices_count;
+	unsigned int subdevices_avail;
+	unsigned char pad1[16];		/* was: hardware synchronization ID */
+	unsigned char reserved[64];	/* reserved for future... */
+};
+
+typedef int snd_pcm_hw_param_t;
+#define	SNDRV_PCM_HW_PARAM_ACCESS	0	/* Access type */
+#define	SNDRV_PCM_HW_PARAM_FORMAT	1	/* Format */
+#define	SNDRV_PCM_HW_PARAM_SUBFORMAT	2	/* Subformat */
+#define	SNDRV_PCM_HW_PARAM_FIRST_MASK	SNDRV_PCM_HW_PARAM_ACCESS
+#define	SNDRV_PCM_HW_PARAM_LAST_MASK	SNDRV_PCM_HW_PARAM_SUBFORMAT
+
+#define	SNDRV_PCM_HW_PARAM_SAMPLE_BITS	8	/* Bits per sample */
+#define	SNDRV_PCM_HW_PARAM_FRAME_BITS	9	/* Bits per frame */
+#define	SNDRV_PCM_HW_PARAM_CHANNELS	10	/* Channels */
+#define	SNDRV_PCM_HW_PARAM_RATE		11	/* Approx rate */
+#define	SNDRV_PCM_HW_PARAM_PERIOD_TIME	12	/* Approx distance between
+						 * interrupts in us
+						 */
+#define	SNDRV_PCM_HW_PARAM_PERIOD_SIZE	13	/* Approx frames between
+						 * interrupts
+						 */
+#define	SNDRV_PCM_HW_PARAM_PERIOD_BYTES	14	/* Approx bytes between
+						 * interrupts
+						 */
+#define	SNDRV_PCM_HW_PARAM_PERIODS	15	/* Approx interrupts per
+						 * buffer
+						 */
+#define	SNDRV_PCM_HW_PARAM_BUFFER_TIME	16	/* Approx duration of buffer
+						 * in us
+						 */
+#define	SNDRV_PCM_HW_PARAM_BUFFER_SIZE	17	/* Size of buffer in frames */
+#define	SNDRV_PCM_HW_PARAM_BUFFER_BYTES	18	/* Size of buffer in bytes */
+#define	SNDRV_PCM_HW_PARAM_TICK_TIME	19	/* Approx tick duration in us */
+#define	SNDRV_PCM_HW_PARAM_FIRST_INTERVAL	SNDRV_PCM_HW_PARAM_SAMPLE_BITS
+#define	SNDRV_PCM_HW_PARAM_LAST_INTERVAL	SNDRV_PCM_HW_PARAM_TICK_TIME
+
+#define SNDRV_PCM_HW_PARAMS_NORESAMPLE	(1<<0)	/* avoid rate resampling */
+#define SNDRV_PCM_HW_PARAMS_EXPORT_BUFFER	(1<<1)	/* export buffer */
+#define SNDRV_PCM_HW_PARAMS_NO_PERIOD_WAKEUP	(1<<2)	/* disable period wakeups */
+#define SNDRV_PCM_HW_PARAMS_NO_DRAIN_SILENCE	(1<<3)	/* suppress drain with the filling
+							 * of the silence samples
+							 */
+
+struct snd_interval {
+	unsigned int min, max;
+	unsigned int openmin:1,
+		     openmax:1,
+		     integer:1,
+		     empty:1;
+};
+
+#define SNDRV_MASK_MAX	256
+
+struct snd_mask {
+	__u32 bits[(SNDRV_MASK_MAX+31)/32];
+};
+
+struct snd_pcm_hw_params {
+	unsigned int flags;
+	struct snd_mask masks[SNDRV_PCM_HW_PARAM_LAST_MASK -
+			       SNDRV_PCM_HW_PARAM_FIRST_MASK + 1];
+	struct snd_mask mres[5];	/* reserved masks */
+	struct snd_interval intervals[SNDRV_PCM_HW_PARAM_LAST_INTERVAL -
+				        SNDRV_PCM_HW_PARAM_FIRST_INTERVAL + 1];
+	struct snd_interval ires[9];	/* reserved intervals */
+	unsigned int rmask;		/* W: requested masks */
+	unsigned int cmask;		/* R: changed masks */
+	unsigned int info;		/* R: Info flags for returned setup */
+	unsigned int msbits;		/* R: used most significant bits (in sample bit-width) */
+	unsigned int rate_num;		/* R: rate numerator */
+	unsigned int rate_den;		/* R: rate denominator */
+	snd_pcm_uframes_t fifo_size;	/* R: chip FIFO size in frames */
+	unsigned char sync[16];		/* R: synchronization ID (perfect sync - one clock source) */
+	unsigned char reserved[48];	/* reserved for future */
+};
+
+enum {
+	SNDRV_PCM_TSTAMP_NONE = 0,
+	SNDRV_PCM_TSTAMP_ENABLE,
+	SNDRV_PCM_TSTAMP_LAST = SNDRV_PCM_TSTAMP_ENABLE,
+};
+
+struct snd_pcm_sw_params {
+	int tstamp_mode;			/* timestamp mode */
+	unsigned int period_step;
+	unsigned int sleep_min;			/* min ticks to sleep */
+	snd_pcm_uframes_t avail_min;		/* min avail frames for wakeup */
+	snd_pcm_uframes_t xfer_align;		/* obsolete: xfer size need to be a multiple */
+	snd_pcm_uframes_t start_threshold;	/* min hw_avail frames for automatic start */
+	/*
+	 * The following two thresholds alleviate playback buffer underruns; when
+	 * hw_avail drops below the threshold, the respective action is triggered:
+	 */
+	snd_pcm_uframes_t stop_threshold;	/* - stop playback */
+	snd_pcm_uframes_t silence_threshold;	/* - pre-fill buffer with silence */
+	snd_pcm_uframes_t silence_size;		/* max size of silence pre-fill; when >= boundary,
+						 * fill played area with silence immediately */
+	snd_pcm_uframes_t boundary;		/* pointers wrap point */
+	unsigned int proto;			/* protocol version */
+	unsigned int tstamp_type;		/* timestamp type (req. proto >= 2.0.12) */
+	unsigned char reserved[56];		/* reserved for future */
+};
+
+struct snd_pcm_channel_info {
+	unsigned int channel;
+	__kernel_off_t offset;		/* mmap offset */
+	unsigned int first;		/* offset to first sample in bits */
+	unsigned int step;		/* samples distance in bits */
+};
+
+enum {
+	/*
+	 *  first definition for backwards compatibility only,
+	 *  maps to wallclock/link time for HDAudio playback and DEFAULT/DMA time for everything else
+	 */
+	SNDRV_PCM_AUDIO_TSTAMP_TYPE_COMPAT = 0,
+
+	/* timestamp definitions */
+	SNDRV_PCM_AUDIO_TSTAMP_TYPE_DEFAULT = 1,           /* DMA time, reported as per hw_ptr */
+	SNDRV_PCM_AUDIO_TSTAMP_TYPE_LINK = 2,	           /* link time reported by sample or wallclock counter, reset on startup */
+	SNDRV_PCM_AUDIO_TSTAMP_TYPE_LINK_ABSOLUTE = 3,	   /* link time reported by sample or wallclock counter, not reset on startup */
+	SNDRV_PCM_AUDIO_TSTAMP_TYPE_LINK_ESTIMATED = 4,    /* link time estimated indirectly */
+	SNDRV_PCM_AUDIO_TSTAMP_TYPE_LINK_SYNCHRONIZED = 5, /* link time synchronized with system time */
+	SNDRV_PCM_AUDIO_TSTAMP_TYPE_LAST = SNDRV_PCM_AUDIO_TSTAMP_TYPE_LINK_SYNCHRONIZED
+};
+
+#ifndef __KERNEL__
+/* explicit padding avoids incompatibility between i386 and x86-64 */
+typedef struct { unsigned char pad[sizeof(time_t) - sizeof(int)]; } __time_pad;
+
+struct snd_pcm_status {
+	snd_pcm_state_t state;		/* stream state */
+	__time_pad pad1;		/* align to timespec */
+	struct timespec trigger_tstamp;	/* time when stream was started/stopped/paused */
+	struct timespec tstamp;		/* reference timestamp */
+	snd_pcm_uframes_t appl_ptr;	/* appl ptr */
+	snd_pcm_uframes_t hw_ptr;	/* hw ptr */
+	snd_pcm_sframes_t delay;	/* current delay in frames */
+	snd_pcm_uframes_t avail;	/* number of frames available */
+	snd_pcm_uframes_t avail_max;	/* max frames available on hw since last status */
+	snd_pcm_uframes_t overrange;	/* count of ADC (capture) overrange detections from last status */
+	snd_pcm_state_t suspended_state; /* suspended stream state */
+	__u32 audio_tstamp_data;	 /* needed for 64-bit alignment, used for configs/report to/from userspace */
+	struct timespec audio_tstamp;	/* sample counter, wall clock, PHC or on-demand sync'ed */
+	struct timespec driver_tstamp;	/* useful in case reference system tstamp is reported with delay */
+	__u32 audio_tstamp_accuracy;	/* in ns units, only valid if indicated in audio_tstamp_data */
+	unsigned char reserved[52-2*sizeof(struct timespec)]; /* must be filled with zero */
+};
+#endif
+
+/*
+ * For mmap operations, we need the 64-bit layout, both for compat mode,
+ * and for y2038 compatibility. For 64-bit applications, the two definitions
+ * are identical, so we keep the traditional version.
+ */
+#ifdef __SND_STRUCT_TIME64
+#define __snd_pcm_mmap_status64		snd_pcm_mmap_status
+#define __snd_pcm_mmap_control64	snd_pcm_mmap_control
+#define __snd_pcm_sync_ptr64		snd_pcm_sync_ptr
+#ifdef __KERNEL__
+#define __snd_timespec64		__kernel_timespec
+#else
+#define __snd_timespec64		timespec
+#endif
+struct __snd_timespec {
+	__s32 tv_sec;
+	__s32 tv_nsec;
+};
+#else
+#define __snd_pcm_mmap_status		snd_pcm_mmap_status
+#define __snd_pcm_mmap_control		snd_pcm_mmap_control
+#define __snd_pcm_sync_ptr		snd_pcm_sync_ptr
+#define __snd_timespec			timespec
+struct __snd_timespec64 {
+	__s64 tv_sec;
+	__s64 tv_nsec;
+};
+
+#endif
+
+struct __snd_pcm_mmap_status {
+	snd_pcm_state_t state;		/* RO: state - SNDRV_PCM_STATE_XXXX */
+	int pad1;			/* Needed for 64 bit alignment */
+	snd_pcm_uframes_t hw_ptr;	/* RO: hw ptr (0...boundary-1) */
+	struct __snd_timespec tstamp;	/* Timestamp */
+	snd_pcm_state_t suspended_state; /* RO: suspended stream state */
+	struct __snd_timespec audio_tstamp; /* from sample counter or wall clock */
+};
+
+struct __snd_pcm_mmap_control {
+	snd_pcm_uframes_t appl_ptr;	/* RW: appl ptr (0...boundary-1) */
+	snd_pcm_uframes_t avail_min;	/* RW: min available frames for wakeup */
+};
+
+#define SNDRV_PCM_SYNC_PTR_HWSYNC	(1<<0)	/* execute hwsync */
+#define SNDRV_PCM_SYNC_PTR_APPL		(1<<1)	/* get appl_ptr from driver (r/w op) */
+#define SNDRV_PCM_SYNC_PTR_AVAIL_MIN	(1<<2)	/* get avail_min from driver */
+
+struct __snd_pcm_sync_ptr {
+	unsigned int flags;
+	union {
+		struct __snd_pcm_mmap_status status;
+		unsigned char reserved[64];
+	} s;
+	union {
+		struct __snd_pcm_mmap_control control;
+		unsigned char reserved[64];
+	} c;
+};
+
+#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN)
+typedef char __pad_before_uframe[sizeof(__u64) - sizeof(snd_pcm_uframes_t)];
+typedef char __pad_after_uframe[0];
+#endif
+
+#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN)
+typedef char __pad_before_uframe[0];
+typedef char __pad_after_uframe[sizeof(__u64) - sizeof(snd_pcm_uframes_t)];
+#endif
+
+struct __snd_pcm_mmap_status64 {
+	snd_pcm_state_t state;		/* RO: state - SNDRV_PCM_STATE_XXXX */
+	__u32 pad1;			/* Needed for 64 bit alignment */
+	__pad_before_uframe __pad1;
+	snd_pcm_uframes_t hw_ptr;	/* RO: hw ptr (0...boundary-1) */
+	__pad_after_uframe __pad2;
+	struct __snd_timespec64 tstamp;	/* Timestamp */
+	snd_pcm_state_t suspended_state;/* RO: suspended stream state */
+	__u32 pad3;			/* Needed for 64 bit alignment */
+	struct __snd_timespec64 audio_tstamp; /* sample counter or wall clock */
+};
+
+struct __snd_pcm_mmap_control64 {
+	__pad_before_uframe __pad1;
+	snd_pcm_uframes_t appl_ptr;	 /* RW: appl ptr (0...boundary-1) */
+	__pad_before_uframe __pad2;	 // This should be __pad_after_uframe, but binary
+					 // backwards compatibility constraints prevent a fix.
+
+	__pad_before_uframe __pad3;
+	snd_pcm_uframes_t  avail_min;	 /* RW: min available frames for wakeup */
+	__pad_after_uframe __pad4;
+};
+
+struct __snd_pcm_sync_ptr64 {
+	__u32 flags;
+	__u32 pad1;
+	union {
+		struct __snd_pcm_mmap_status64 status;
+		unsigned char reserved[64];
+	} s;
+	union {
+		struct __snd_pcm_mmap_control64 control;
+		unsigned char reserved[64];
+	} c;
+};
+
+struct snd_xferi {
+	snd_pcm_sframes_t result;
+	void __user *buf;
+	snd_pcm_uframes_t frames;
+};
+
+struct snd_xfern {
+	snd_pcm_sframes_t result;
+	void __user * __user *bufs;
+	snd_pcm_uframes_t frames;
+};
+
+enum {
+	SNDRV_PCM_TSTAMP_TYPE_GETTIMEOFDAY = 0,	/* gettimeofday equivalent */
+	SNDRV_PCM_TSTAMP_TYPE_MONOTONIC,	/* posix_clock_monotonic equivalent */
+	SNDRV_PCM_TSTAMP_TYPE_MONOTONIC_RAW,    /* monotonic_raw (no NTP) */
+	SNDRV_PCM_TSTAMP_TYPE_LAST = SNDRV_PCM_TSTAMP_TYPE_MONOTONIC_RAW,
+};
+
+/* channel positions */
+enum {
+	SNDRV_CHMAP_UNKNOWN = 0,
+	SNDRV_CHMAP_NA,		/* N/A, silent */
+	SNDRV_CHMAP_MONO,	/* mono stream */
+	/* this follows the alsa-lib mixer channel value + 3 */
+	SNDRV_CHMAP_FL,		/* front left */
+	SNDRV_CHMAP_FR,		/* front right */
+	SNDRV_CHMAP_RL,		/* rear left */
+	SNDRV_CHMAP_RR,		/* rear right */
+	SNDRV_CHMAP_FC,		/* front center */
+	SNDRV_CHMAP_LFE,	/* LFE */
+	SNDRV_CHMAP_SL,		/* side left */
+	SNDRV_CHMAP_SR,		/* side right */
+	SNDRV_CHMAP_RC,		/* rear center */
+	/* new definitions */
+	SNDRV_CHMAP_FLC,	/* front left center */
+	SNDRV_CHMAP_FRC,	/* front right center */
+	SNDRV_CHMAP_RLC,	/* rear left center */
+	SNDRV_CHMAP_RRC,	/* rear right center */
+	SNDRV_CHMAP_FLW,	/* front left wide */
+	SNDRV_CHMAP_FRW,	/* front right wide */
+	SNDRV_CHMAP_FLH,	/* front left high */
+	SNDRV_CHMAP_FCH,	/* front center high */
+	SNDRV_CHMAP_FRH,	/* front right high */
+	SNDRV_CHMAP_TC,		/* top center */
+	SNDRV_CHMAP_TFL,	/* top front left */
+	SNDRV_CHMAP_TFR,	/* top front right */
+	SNDRV_CHMAP_TFC,	/* top front center */
+	SNDRV_CHMAP_TRL,	/* top rear left */
+	SNDRV_CHMAP_TRR,	/* top rear right */
+	SNDRV_CHMAP_TRC,	/* top rear center */
+	/* new definitions for UAC2 */
+	SNDRV_CHMAP_TFLC,	/* top front left center */
+	SNDRV_CHMAP_TFRC,	/* top front right center */
+	SNDRV_CHMAP_TSL,	/* top side left */
+	SNDRV_CHMAP_TSR,	/* top side right */
+	SNDRV_CHMAP_LLFE,	/* left LFE */
+	SNDRV_CHMAP_RLFE,	/* right LFE */
+	SNDRV_CHMAP_BC,		/* bottom center */
+	SNDRV_CHMAP_BLC,	/* bottom left center */
+	SNDRV_CHMAP_BRC,	/* bottom right center */
+	SNDRV_CHMAP_LAST = SNDRV_CHMAP_BRC,
+};
+
+#define SNDRV_CHMAP_POSITION_MASK	0xffff
+#define SNDRV_CHMAP_PHASE_INVERSE	(0x01 << 16)
+#define SNDRV_CHMAP_DRIVER_SPEC		(0x02 << 16)
+
+#define SNDRV_PCM_IOCTL_PVERSION	_IOR('A', 0x00, int)
+#define SNDRV_PCM_IOCTL_INFO		_IOR('A', 0x01, struct snd_pcm_info)
+#define SNDRV_PCM_IOCTL_TSTAMP		_IOW('A', 0x02, int)
+#define SNDRV_PCM_IOCTL_TTSTAMP		_IOW('A', 0x03, int)
+#define SNDRV_PCM_IOCTL_USER_PVERSION	_IOW('A', 0x04, int)
+#define SNDRV_PCM_IOCTL_HW_REFINE	_IOWR('A', 0x10, struct snd_pcm_hw_params)
+#define SNDRV_PCM_IOCTL_HW_PARAMS	_IOWR('A', 0x11, struct snd_pcm_hw_params)
+#define SNDRV_PCM_IOCTL_HW_FREE		_IO('A', 0x12)
+#define SNDRV_PCM_IOCTL_SW_PARAMS	_IOWR('A', 0x13, struct snd_pcm_sw_params)
+#define SNDRV_PCM_IOCTL_STATUS		_IOR('A', 0x20, struct snd_pcm_status)
+#define SNDRV_PCM_IOCTL_DELAY		_IOR('A', 0x21, snd_pcm_sframes_t)
+#define SNDRV_PCM_IOCTL_HWSYNC		_IO('A', 0x22)
+#define __SNDRV_PCM_IOCTL_SYNC_PTR	_IOWR('A', 0x23, struct __snd_pcm_sync_ptr)
+#define __SNDRV_PCM_IOCTL_SYNC_PTR64	_IOWR('A', 0x23, struct __snd_pcm_sync_ptr64)
+#define SNDRV_PCM_IOCTL_SYNC_PTR	_IOWR('A', 0x23, struct snd_pcm_sync_ptr)
+#define SNDRV_PCM_IOCTL_STATUS_EXT	_IOWR('A', 0x24, struct snd_pcm_status)
+#define SNDRV_PCM_IOCTL_CHANNEL_INFO	_IOR('A', 0x32, struct snd_pcm_channel_info)
+#define SNDRV_PCM_IOCTL_PREPARE		_IO('A', 0x40)
+#define SNDRV_PCM_IOCTL_RESET		_IO('A', 0x41)
+#define SNDRV_PCM_IOCTL_START		_IO('A', 0x42)
+#define SNDRV_PCM_IOCTL_DROP		_IO('A', 0x43)
+#define SNDRV_PCM_IOCTL_DRAIN		_IO('A', 0x44)
+#define SNDRV_PCM_IOCTL_PAUSE		_IOW('A', 0x45, int)
+#define SNDRV_PCM_IOCTL_REWIND		_IOW('A', 0x46, snd_pcm_uframes_t)
+#define SNDRV_PCM_IOCTL_RESUME		_IO('A', 0x47)
+#define SNDRV_PCM_IOCTL_XRUN		_IO('A', 0x48)
+#define SNDRV_PCM_IOCTL_FORWARD		_IOW('A', 0x49, snd_pcm_uframes_t)
+#define SNDRV_PCM_IOCTL_WRITEI_FRAMES	_IOW('A', 0x50, struct snd_xferi)
+#define SNDRV_PCM_IOCTL_READI_FRAMES	_IOR('A', 0x51, struct snd_xferi)
+#define SNDRV_PCM_IOCTL_WRITEN_FRAMES	_IOW('A', 0x52, struct snd_xfern)
+#define SNDRV_PCM_IOCTL_READN_FRAMES	_IOR('A', 0x53, struct snd_xfern)
+#define SNDRV_PCM_IOCTL_LINK		_IOW('A', 0x60, int)
+#define SNDRV_PCM_IOCTL_UNLINK		_IO('A', 0x61)
+
+/*****************************************************************************
+ *                                                                           *
+ *                            MIDI v1.0 interface                            *
+ *                                                                           *
+ *****************************************************************************/
+
+/*
+ *  Raw MIDI section - /dev/snd/midi??
+ */
+
+#define SNDRV_RAWMIDI_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 5)
+
+enum {
+	SNDRV_RAWMIDI_STREAM_OUTPUT = 0,
+	SNDRV_RAWMIDI_STREAM_INPUT,
+	SNDRV_RAWMIDI_STREAM_LAST = SNDRV_RAWMIDI_STREAM_INPUT,
+};
+
+#define SNDRV_RAWMIDI_INFO_OUTPUT		0x00000001
+#define SNDRV_RAWMIDI_INFO_INPUT		0x00000002
+#define SNDRV_RAWMIDI_INFO_DUPLEX		0x00000004
+#define SNDRV_RAWMIDI_INFO_UMP			0x00000008
+#define SNDRV_RAWMIDI_INFO_STREAM_INACTIVE	0x00000010
+
+#define SNDRV_RAWMIDI_DEVICE_UNKNOWN		0
+
+struct snd_rawmidi_info {
+	unsigned int device;		/* RO/WR (control): device number */
+	unsigned int subdevice;		/* RO/WR (control): subdevice number */
+	int stream;			/* WR: stream */
+	int card;			/* R: card number */
+	unsigned int flags;		/* SNDRV_RAWMIDI_INFO_XXXX */
+	unsigned char id[64];		/* ID (user selectable) */
+	unsigned char name[80];		/* name of device */
+	unsigned char subname[32];	/* name of active or selected subdevice */
+	unsigned int subdevices_count;
+	unsigned int subdevices_avail;
+	int tied_device;		/* R: tied rawmidi device (UMP/legacy) */
+	unsigned char reserved[60];	/* reserved for future use */
+};
+
+#define SNDRV_RAWMIDI_MODE_FRAMING_MASK		(7<<0)
+#define SNDRV_RAWMIDI_MODE_FRAMING_SHIFT	0
+#define SNDRV_RAWMIDI_MODE_FRAMING_NONE		(0<<0)
+#define SNDRV_RAWMIDI_MODE_FRAMING_TSTAMP	(1<<0)
+#define SNDRV_RAWMIDI_MODE_CLOCK_MASK		(7<<3)
+#define SNDRV_RAWMIDI_MODE_CLOCK_SHIFT		3
+#define SNDRV_RAWMIDI_MODE_CLOCK_NONE		(0<<3)
+#define SNDRV_RAWMIDI_MODE_CLOCK_REALTIME	(1<<3)
+#define SNDRV_RAWMIDI_MODE_CLOCK_MONOTONIC	(2<<3)
+#define SNDRV_RAWMIDI_MODE_CLOCK_MONOTONIC_RAW	(3<<3)
+
+#define SNDRV_RAWMIDI_FRAMING_DATA_LENGTH 16
+
+struct snd_rawmidi_framing_tstamp {
+	/* For now, frame_type is always 0. Midi 2.0 is expected to add new
+	 * types here. Applications are expected to skip unknown frame types.
+	 */
+	__u8 frame_type;
+	__u8 length; /* number of valid bytes in data field */
+	__u8 reserved[2];
+	__u32 tv_nsec;		/* nanoseconds */
+	__u64 tv_sec;		/* seconds */
+	__u8 data[SNDRV_RAWMIDI_FRAMING_DATA_LENGTH];
+} __packed;
+
+struct snd_rawmidi_params {
+	int stream;
+	size_t buffer_size;		/* queue size in bytes */
+	size_t avail_min;		/* minimum avail bytes for wakeup */
+	unsigned int no_active_sensing: 1; /* do not send active sensing byte in close() */
+	unsigned int mode;		/* For input data only, frame incoming data */
+	unsigned char reserved[12];	/* reserved for future use */
+};
+
+#ifndef __KERNEL__
+struct snd_rawmidi_status {
+	int stream;
+	__time_pad pad1;
+	struct timespec tstamp;		/* Timestamp */
+	size_t avail;			/* available bytes */
+	size_t xruns;			/* count of overruns since last status (in bytes) */
+	unsigned char reserved[16];	/* reserved for future use */
+};
+#endif
+
+/* UMP EP info flags */
+#define SNDRV_UMP_EP_INFO_STATIC_BLOCKS		0x01
+
+/* UMP EP Protocol / JRTS capability bits */
+#define SNDRV_UMP_EP_INFO_PROTO_MIDI_MASK	0x0300
+#define SNDRV_UMP_EP_INFO_PROTO_MIDI1		0x0100 /* MIDI 1.0 */
+#define SNDRV_UMP_EP_INFO_PROTO_MIDI2		0x0200 /* MIDI 2.0 */
+#define SNDRV_UMP_EP_INFO_PROTO_JRTS_MASK	0x0003
+#define SNDRV_UMP_EP_INFO_PROTO_JRTS_TX		0x0001 /* JRTS Transmit */
+#define SNDRV_UMP_EP_INFO_PROTO_JRTS_RX		0x0002 /* JRTS Receive */
+
+/* UMP Endpoint information */
+struct snd_ump_endpoint_info {
+	int card;			/* card number */
+	int device;			/* device number */
+	unsigned int flags;		/* additional info */
+	unsigned int protocol_caps;	/* protocol capabilities */
+	unsigned int protocol;		/* current protocol */
+	unsigned int num_blocks;	/* # of function blocks */
+	unsigned short version;		/* UMP major/minor version */
+	unsigned short family_id;	/* MIDI device family ID */
+	unsigned short model_id;	/* MIDI family model ID */
+	unsigned int manufacturer_id;	/* MIDI manufacturer ID */
+	unsigned char sw_revision[4];	/* software revision */
+	unsigned short padding;
+	unsigned char name[128];	/* endpoint name string */
+	unsigned char product_id[128];	/* unique product id string */
+	unsigned char reserved[32];
+} __packed;
+
+/* UMP direction */
+#define SNDRV_UMP_DIR_INPUT		0x01
+#define SNDRV_UMP_DIR_OUTPUT		0x02
+#define SNDRV_UMP_DIR_BIDIRECTION	0x03
+
+/* UMP block info flags */
+#define SNDRV_UMP_BLOCK_IS_MIDI1	(1U << 0) /* MIDI 1.0 port w/o restrict */
+#define SNDRV_UMP_BLOCK_IS_LOWSPEED	(1U << 1) /* 31.25Kbps B/W MIDI1 port */
+
+/* UMP block user-interface hint */
+#define SNDRV_UMP_BLOCK_UI_HINT_UNKNOWN		0x00
+#define SNDRV_UMP_BLOCK_UI_HINT_RECEIVER	0x01
+#define SNDRV_UMP_BLOCK_UI_HINT_SENDER		0x02
+#define SNDRV_UMP_BLOCK_UI_HINT_BOTH		0x03
+
+/* UMP groups and blocks */
+#define SNDRV_UMP_MAX_GROUPS		16
+#define SNDRV_UMP_MAX_BLOCKS		32
+
+/* UMP Block information */
+struct snd_ump_block_info {
+	int card;			/* card number */
+	int device;			/* device number */
+	unsigned char block_id;		/* block ID (R/W) */
+	unsigned char direction;	/* UMP direction */
+	unsigned char active;		/* Activeness */
+	unsigned char first_group;	/* first group ID */
+	unsigned char num_groups;	/* number of groups */
+	unsigned char midi_ci_version;	/* MIDI-CI support version */
+	unsigned char sysex8_streams;	/* max number of sysex8 streams */
+	unsigned char ui_hint;		/* user interface hint */
+	unsigned int flags;		/* various info flags */
+	unsigned char name[128];	/* block name string */
+	unsigned char reserved[32];
+} __packed;
+
+#define SNDRV_RAWMIDI_IOCTL_PVERSION	_IOR('W', 0x00, int)
+#define SNDRV_RAWMIDI_IOCTL_INFO	_IOR('W', 0x01, struct snd_rawmidi_info)
+#define SNDRV_RAWMIDI_IOCTL_USER_PVERSION _IOW('W', 0x02, int)
+#define SNDRV_RAWMIDI_IOCTL_PARAMS	_IOWR('W', 0x10, struct snd_rawmidi_params)
+#define SNDRV_RAWMIDI_IOCTL_STATUS	_IOWR('W', 0x20, struct snd_rawmidi_status)
+#define SNDRV_RAWMIDI_IOCTL_DROP	_IOW('W', 0x30, int)
+#define SNDRV_RAWMIDI_IOCTL_DRAIN	_IOW('W', 0x31, int)
+/* Additional ioctls for UMP rawmidi devices */
+#define SNDRV_UMP_IOCTL_ENDPOINT_INFO	_IOR('W', 0x40, struct snd_ump_endpoint_info)
+#define SNDRV_UMP_IOCTL_BLOCK_INFO	_IOR('W', 0x41, struct snd_ump_block_info)
+
+/*
+ *  Timer section - /dev/snd/timer
+ */
+
+#define SNDRV_TIMER_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 8)
+
+enum {
+	SNDRV_TIMER_CLASS_NONE = -1,
+	SNDRV_TIMER_CLASS_SLAVE = 0,
+	SNDRV_TIMER_CLASS_GLOBAL,
+	SNDRV_TIMER_CLASS_CARD,
+	SNDRV_TIMER_CLASS_PCM,
+	SNDRV_TIMER_CLASS_LAST = SNDRV_TIMER_CLASS_PCM,
+};
+
+/* slave timer classes */
+enum {
+	SNDRV_TIMER_SCLASS_NONE = 0,
+	SNDRV_TIMER_SCLASS_APPLICATION,
+	SNDRV_TIMER_SCLASS_SEQUENCER,		/* alias */
+	SNDRV_TIMER_SCLASS_OSS_SEQUENCER,	/* alias */
+	SNDRV_TIMER_SCLASS_LAST = SNDRV_TIMER_SCLASS_OSS_SEQUENCER,
+};
+
+/* global timers (device member) */
+#define SNDRV_TIMER_GLOBAL_SYSTEM	0
+#define SNDRV_TIMER_GLOBAL_RTC		1	/* unused */
+#define SNDRV_TIMER_GLOBAL_HPET		2
+#define SNDRV_TIMER_GLOBAL_HRTIMER	3
+#define SNDRV_TIMER_GLOBAL_UDRIVEN	4
+
+/* info flags */
+#define SNDRV_TIMER_FLG_SLAVE		(1<<0)	/* cannot be controlled */
+
+struct snd_timer_id {
+	int dev_class;
+	int dev_sclass;
+	int card;
+	int device;
+	int subdevice;
+};
+
+struct snd_timer_ginfo {
+	struct snd_timer_id tid;	/* requested timer ID */
+	unsigned int flags;		/* timer flags - SNDRV_TIMER_FLG_* */
+	int card;			/* card number */
+	unsigned char id[64];		/* timer identification */
+	unsigned char name[80];		/* timer name */
+	unsigned long reserved0;	/* reserved for future use */
+	unsigned long resolution;	/* average period resolution in ns */
+	unsigned long resolution_min;	/* minimal period resolution in ns */
+	unsigned long resolution_max;	/* maximal period resolution in ns */
+	unsigned int clients;		/* active timer clients */
+	unsigned char reserved[32];
+};
+
+struct snd_timer_gparams {
+	struct snd_timer_id tid;	/* requested timer ID */
+	unsigned long period_num;	/* requested precise period duration (in seconds) - numerator */
+	unsigned long period_den;	/* requested precise period duration (in seconds) - denominator */
+	unsigned char reserved[32];
+};
+
+struct snd_timer_gstatus {
+	struct snd_timer_id tid;	/* requested timer ID */
+	unsigned long resolution;	/* current period resolution in ns */
+	unsigned long resolution_num;	/* precise current period resolution (in seconds) - numerator */
+	unsigned long resolution_den;	/* precise current period resolution (in seconds) - denominator */
+	unsigned char reserved[32];
+};
+
+struct snd_timer_select {
+	struct snd_timer_id id;	/* bind to timer ID */
+	unsigned char reserved[32];	/* reserved */
+};
+
+struct snd_timer_info {
+	unsigned int flags;		/* timer flags - SNDRV_TIMER_FLG_* */
+	int card;			/* card number */
+	unsigned char id[64];		/* timer identificator */
+	unsigned char name[80];		/* timer name */
+	unsigned long reserved0;	/* reserved for future use */
+	unsigned long resolution;	/* average period resolution in ns */
+	unsigned char reserved[64];	/* reserved */
+};
+
+#define SNDRV_TIMER_PSFLG_AUTO		(1<<0)	/* auto start, otherwise one-shot */
+#define SNDRV_TIMER_PSFLG_EXCLUSIVE	(1<<1)	/* exclusive use, precise start/stop/pause/continue */
+#define SNDRV_TIMER_PSFLG_EARLY_EVENT	(1<<2)	/* write early event to the poll queue */
+
+struct snd_timer_params {
+	unsigned int flags;		/* flags - SNDRV_TIMER_PSFLG_* */
+	unsigned int ticks;		/* requested resolution in ticks */
+	unsigned int queue_size;	/* total size of queue (32-1024) */
+	unsigned int reserved0;		/* reserved, was: failure locations */
+	unsigned int filter;		/* event filter (bitmask of SNDRV_TIMER_EVENT_*) */
+	unsigned char reserved[60];	/* reserved */
+};
+
+#ifndef __KERNEL__
+struct snd_timer_status {
+	struct timespec tstamp;		/* Timestamp - last update */
+	unsigned int resolution;	/* current period resolution in ns */
+	unsigned int lost;		/* counter of master tick lost */
+	unsigned int overrun;		/* count of read queue overruns */
+	unsigned int queue;		/* used queue size */
+	unsigned char reserved[64];	/* reserved */
+};
+#endif
+
+/*
+ * This structure describes the userspace-driven timer. Such timers are purely virtual,
+ * and can only be triggered from software (for instance, by userspace application).
+ */
+struct snd_timer_uinfo {
+	/* To pretend being a normal timer, we need to know the resolution in ns. */
+	__u64 resolution;
+	int fd;
+	unsigned int id;
+	unsigned char reserved[16];
+};
+
+#define SNDRV_TIMER_IOCTL_PVERSION	_IOR('T', 0x00, int)
+#define SNDRV_TIMER_IOCTL_NEXT_DEVICE	_IOWR('T', 0x01, struct snd_timer_id)
+#define SNDRV_TIMER_IOCTL_TREAD_OLD	_IOW('T', 0x02, int)
+#define SNDRV_TIMER_IOCTL_GINFO		_IOWR('T', 0x03, struct snd_timer_ginfo)
+#define SNDRV_TIMER_IOCTL_GPARAMS	_IOW('T', 0x04, struct snd_timer_gparams)
+#define SNDRV_TIMER_IOCTL_GSTATUS	_IOWR('T', 0x05, struct snd_timer_gstatus)
+#define SNDRV_TIMER_IOCTL_SELECT	_IOW('T', 0x10, struct snd_timer_select)
+#define SNDRV_TIMER_IOCTL_INFO		_IOR('T', 0x11, struct snd_timer_info)
+#define SNDRV_TIMER_IOCTL_PARAMS	_IOW('T', 0x12, struct snd_timer_params)
+#define SNDRV_TIMER_IOCTL_STATUS	_IOR('T', 0x14, struct snd_timer_status)
+/* The following four ioctls are changed since 1.0.9 due to confliction */
+#define SNDRV_TIMER_IOCTL_START		_IO('T', 0xa0)
+#define SNDRV_TIMER_IOCTL_STOP		_IO('T', 0xa1)
+#define SNDRV_TIMER_IOCTL_CONTINUE	_IO('T', 0xa2)
+#define SNDRV_TIMER_IOCTL_PAUSE		_IO('T', 0xa3)
+#define SNDRV_TIMER_IOCTL_TREAD64	_IOW('T', 0xa4, int)
+#define SNDRV_TIMER_IOCTL_CREATE	_IOWR('T', 0xa5, struct snd_timer_uinfo)
+#define SNDRV_TIMER_IOCTL_TRIGGER	_IO('T', 0xa6)
+
+#if __BITS_PER_LONG == 64
+#define SNDRV_TIMER_IOCTL_TREAD SNDRV_TIMER_IOCTL_TREAD_OLD
+#else
+#define SNDRV_TIMER_IOCTL_TREAD ((sizeof(__kernel_long_t) >= sizeof(time_t)) ? \
+				 SNDRV_TIMER_IOCTL_TREAD_OLD : \
+				 SNDRV_TIMER_IOCTL_TREAD64)
+#endif
+
+struct snd_timer_read {
+	unsigned int resolution;
+	unsigned int ticks;
+};
+
+enum {
+	SNDRV_TIMER_EVENT_RESOLUTION = 0,	/* val = resolution in ns */
+	SNDRV_TIMER_EVENT_TICK,			/* val = ticks */
+	SNDRV_TIMER_EVENT_START,		/* val = resolution in ns */
+	SNDRV_TIMER_EVENT_STOP,			/* val = 0 */
+	SNDRV_TIMER_EVENT_CONTINUE,		/* val = resolution in ns */
+	SNDRV_TIMER_EVENT_PAUSE,		/* val = 0 */
+	SNDRV_TIMER_EVENT_EARLY,		/* val = 0, early event */
+	SNDRV_TIMER_EVENT_SUSPEND,		/* val = 0 */
+	SNDRV_TIMER_EVENT_RESUME,		/* val = resolution in ns */
+	/* master timer events for slave timer instances */
+	SNDRV_TIMER_EVENT_MSTART = SNDRV_TIMER_EVENT_START + 10,
+	SNDRV_TIMER_EVENT_MSTOP = SNDRV_TIMER_EVENT_STOP + 10,
+	SNDRV_TIMER_EVENT_MCONTINUE = SNDRV_TIMER_EVENT_CONTINUE + 10,
+	SNDRV_TIMER_EVENT_MPAUSE = SNDRV_TIMER_EVENT_PAUSE + 10,
+	SNDRV_TIMER_EVENT_MSUSPEND = SNDRV_TIMER_EVENT_SUSPEND + 10,
+	SNDRV_TIMER_EVENT_MRESUME = SNDRV_TIMER_EVENT_RESUME + 10,
+};
+
+#ifndef __KERNEL__
+struct snd_timer_tread {
+	int event;
+	__time_pad pad1;
+	struct timespec tstamp;
+	unsigned int val;
+	__time_pad pad2;
+};
+#endif
+
+/****************************************************************************
+ *                                                                          *
+ *        Section for driver control interface - /dev/snd/control?          *
+ *                                                                          *
+ ****************************************************************************/
+
+#define SNDRV_CTL_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 9)
+
+struct snd_ctl_card_info {
+	int card;			/* card number */
+	int pad;			/* reserved for future (was type) */
+	unsigned char id[16];		/* ID of card (user selectable) */
+	unsigned char driver[16];	/* Driver name */
+	unsigned char name[32];		/* Short name of soundcard */
+	unsigned char longname[80];	/* name + info text about soundcard */
+	unsigned char reserved_[16];	/* reserved for future (was ID of mixer) */
+	unsigned char mixername[80];	/* visual mixer identification */
+	unsigned char components[128];	/* card components / fine identification, delimited with one space (AC97 etc..) */
+};
+
+typedef int __bitwise snd_ctl_elem_type_t;
+#define	SNDRV_CTL_ELEM_TYPE_NONE	((__force snd_ctl_elem_type_t) 0) /* invalid */
+#define	SNDRV_CTL_ELEM_TYPE_BOOLEAN	((__force snd_ctl_elem_type_t) 1) /* boolean type */
+#define	SNDRV_CTL_ELEM_TYPE_INTEGER	((__force snd_ctl_elem_type_t) 2) /* integer type */
+#define	SNDRV_CTL_ELEM_TYPE_ENUMERATED	((__force snd_ctl_elem_type_t) 3) /* enumerated type */
+#define	SNDRV_CTL_ELEM_TYPE_BYTES	((__force snd_ctl_elem_type_t) 4) /* byte array */
+#define	SNDRV_CTL_ELEM_TYPE_IEC958	((__force snd_ctl_elem_type_t) 5) /* IEC958 (S/PDIF) setup */
+#define	SNDRV_CTL_ELEM_TYPE_INTEGER64	((__force snd_ctl_elem_type_t) 6) /* 64-bit integer type */
+#define	SNDRV_CTL_ELEM_TYPE_LAST	SNDRV_CTL_ELEM_TYPE_INTEGER64
+
+typedef int __bitwise snd_ctl_elem_iface_t;
+#define	SNDRV_CTL_ELEM_IFACE_CARD	((__force snd_ctl_elem_iface_t) 0) /* global control */
+#define	SNDRV_CTL_ELEM_IFACE_HWDEP	((__force snd_ctl_elem_iface_t) 1) /* hardware dependent device */
+#define	SNDRV_CTL_ELEM_IFACE_MIXER	((__force snd_ctl_elem_iface_t) 2) /* virtual mixer device */
+#define	SNDRV_CTL_ELEM_IFACE_PCM	((__force snd_ctl_elem_iface_t) 3) /* PCM device */
+#define	SNDRV_CTL_ELEM_IFACE_RAWMIDI	((__force snd_ctl_elem_iface_t) 4) /* RawMidi device */
+#define	SNDRV_CTL_ELEM_IFACE_TIMER	((__force snd_ctl_elem_iface_t) 5) /* timer device */
+#define	SNDRV_CTL_ELEM_IFACE_SEQUENCER	((__force snd_ctl_elem_iface_t) 6) /* sequencer client */
+#define	SNDRV_CTL_ELEM_IFACE_LAST	SNDRV_CTL_ELEM_IFACE_SEQUENCER
+
+#define SNDRV_CTL_ELEM_ACCESS_READ		(1<<0)
+#define SNDRV_CTL_ELEM_ACCESS_WRITE		(1<<1)
+#define SNDRV_CTL_ELEM_ACCESS_READWRITE		(SNDRV_CTL_ELEM_ACCESS_READ|SNDRV_CTL_ELEM_ACCESS_WRITE)
+#define SNDRV_CTL_ELEM_ACCESS_VOLATILE		(1<<2)	/* control value may be changed without a notification */
+/* (1 << 3) is unused. */
+#define SNDRV_CTL_ELEM_ACCESS_TLV_READ		(1<<4)	/* TLV read is possible */
+#define SNDRV_CTL_ELEM_ACCESS_TLV_WRITE		(1<<5)	/* TLV write is possible */
+#define SNDRV_CTL_ELEM_ACCESS_TLV_READWRITE	(SNDRV_CTL_ELEM_ACCESS_TLV_READ|SNDRV_CTL_ELEM_ACCESS_TLV_WRITE)
+#define SNDRV_CTL_ELEM_ACCESS_TLV_COMMAND	(1<<6)	/* TLV command is possible */
+#define SNDRV_CTL_ELEM_ACCESS_INACTIVE		(1<<8)	/* control does actually nothing, but may be updated */
+#define SNDRV_CTL_ELEM_ACCESS_LOCK		(1<<9)	/* write lock */
+#define SNDRV_CTL_ELEM_ACCESS_OWNER		(1<<10)	/* write lock owner */
+#define SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK	(1<<28)	/* kernel use a TLV callback */
+#define SNDRV_CTL_ELEM_ACCESS_USER		(1<<29) /* user space element */
+/* bits 30 and 31 are obsoleted (for indirect access) */
+
+/* for further details see the ACPI and PCI power management specification */
+#define SNDRV_CTL_POWER_D0		0x0000	/* full On */
+#define SNDRV_CTL_POWER_D1		0x0100	/* partial On */
+#define SNDRV_CTL_POWER_D2		0x0200	/* partial On */
+#define SNDRV_CTL_POWER_D3		0x0300	/* Off */
+#define SNDRV_CTL_POWER_D3hot		(SNDRV_CTL_POWER_D3|0x0000)	/* Off, with power */
+#define SNDRV_CTL_POWER_D3cold		(SNDRV_CTL_POWER_D3|0x0001)	/* Off, without power */
+
+#define SNDRV_CTL_ELEM_ID_NAME_MAXLEN	44
+
+struct snd_ctl_elem_id {
+	unsigned int numid;		/* numeric identifier, zero = invalid */
+	snd_ctl_elem_iface_t iface;	/* interface identifier */
+	unsigned int device;		/* device/client number */
+	unsigned int subdevice;		/* subdevice (substream) number */
+	unsigned char name[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];		/* ASCII name of item */
+	unsigned int index;		/* index of item */
+};
+
+struct snd_ctl_elem_list {
+	unsigned int offset;		/* W: first element ID to get */
+	unsigned int space;		/* W: count of element IDs to get */
+	unsigned int used;		/* R: count of element IDs set */
+	unsigned int count;		/* R: count of all elements */
+	struct snd_ctl_elem_id __user *pids; /* R: IDs */
+	unsigned char reserved[50];
+};
+
+struct snd_ctl_elem_info {
+	struct snd_ctl_elem_id id;	/* W: element ID */
+	snd_ctl_elem_type_t type;	/* R: value type - SNDRV_CTL_ELEM_TYPE_* */
+	unsigned int access;		/* R: value access (bitmask) - SNDRV_CTL_ELEM_ACCESS_* */
+	unsigned int count;		/* count of values */
+	__kernel_pid_t owner;		/* owner's PID of this control */
+	union {
+		struct {
+			long min;		/* R: minimum value */
+			long max;		/* R: maximum value */
+			long step;		/* R: step (0 variable) */
+		} integer;
+		struct {
+			long long min;		/* R: minimum value */
+			long long max;		/* R: maximum value */
+			long long step;		/* R: step (0 variable) */
+		} integer64;
+		struct {
+			unsigned int items;	/* R: number of items */
+			unsigned int item;	/* W: item number */
+			char name[64];		/* R: value name */
+			__u64 names_ptr;	/* W: names list (ELEM_ADD only) */
+			unsigned int names_length;
+		} enumerated;
+		unsigned char reserved[128];
+	} value;
+	unsigned char reserved[64];
+};
+
+struct snd_ctl_elem_value {
+	struct snd_ctl_elem_id id;	/* W: element ID */
+	unsigned int indirect: 1;	/* W: indirect access - obsoleted */
+	union {
+		union {
+			long value[128];
+			long *value_ptr;	/* obsoleted */
+		} integer;
+		union {
+			long long value[64];
+			long long *value_ptr;	/* obsoleted */
+		} integer64;
+		union {
+			unsigned int item[128];
+			unsigned int *item_ptr;	/* obsoleted */
+		} enumerated;
+		union {
+			unsigned char data[512];
+			unsigned char *data_ptr;	/* obsoleted */
+		} bytes;
+		struct snd_aes_iec958 iec958;
+	} value;		/* RO */
+	unsigned char reserved[128];
+};
+
+struct snd_ctl_tlv {
+	unsigned int numid;	/* control element numeric identification */
+	unsigned int length;	/* in bytes aligned to 4 */
+	unsigned int tlv[];	/* first TLV */
+};
+
+#define SNDRV_CTL_IOCTL_PVERSION	_IOR('U', 0x00, int)
+#define SNDRV_CTL_IOCTL_CARD_INFO	_IOR('U', 0x01, struct snd_ctl_card_info)
+#define SNDRV_CTL_IOCTL_ELEM_LIST	_IOWR('U', 0x10, struct snd_ctl_elem_list)
+#define SNDRV_CTL_IOCTL_ELEM_INFO	_IOWR('U', 0x11, struct snd_ctl_elem_info)
+#define SNDRV_CTL_IOCTL_ELEM_READ	_IOWR('U', 0x12, struct snd_ctl_elem_value)
+#define SNDRV_CTL_IOCTL_ELEM_WRITE	_IOWR('U', 0x13, struct snd_ctl_elem_value)
+#define SNDRV_CTL_IOCTL_ELEM_LOCK	_IOW('U', 0x14, struct snd_ctl_elem_id)
+#define SNDRV_CTL_IOCTL_ELEM_UNLOCK	_IOW('U', 0x15, struct snd_ctl_elem_id)
+#define SNDRV_CTL_IOCTL_SUBSCRIBE_EVENTS _IOWR('U', 0x16, int)
+#define SNDRV_CTL_IOCTL_ELEM_ADD	_IOWR('U', 0x17, struct snd_ctl_elem_info)
+#define SNDRV_CTL_IOCTL_ELEM_REPLACE	_IOWR('U', 0x18, struct snd_ctl_elem_info)
+#define SNDRV_CTL_IOCTL_ELEM_REMOVE	_IOWR('U', 0x19, struct snd_ctl_elem_id)
+#define SNDRV_CTL_IOCTL_TLV_READ	_IOWR('U', 0x1a, struct snd_ctl_tlv)
+#define SNDRV_CTL_IOCTL_TLV_WRITE	_IOWR('U', 0x1b, struct snd_ctl_tlv)
+#define SNDRV_CTL_IOCTL_TLV_COMMAND	_IOWR('U', 0x1c, struct snd_ctl_tlv)
+#define SNDRV_CTL_IOCTL_HWDEP_NEXT_DEVICE _IOWR('U', 0x20, int)
+#define SNDRV_CTL_IOCTL_HWDEP_INFO	_IOR('U', 0x21, struct snd_hwdep_info)
+#define SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE	_IOR('U', 0x30, int)
+#define SNDRV_CTL_IOCTL_PCM_INFO	_IOWR('U', 0x31, struct snd_pcm_info)
+#define SNDRV_CTL_IOCTL_PCM_PREFER_SUBDEVICE _IOW('U', 0x32, int)
+#define SNDRV_CTL_IOCTL_RAWMIDI_NEXT_DEVICE _IOWR('U', 0x40, int)
+#define SNDRV_CTL_IOCTL_RAWMIDI_INFO	_IOWR('U', 0x41, struct snd_rawmidi_info)
+#define SNDRV_CTL_IOCTL_RAWMIDI_PREFER_SUBDEVICE _IOW('U', 0x42, int)
+#define SNDRV_CTL_IOCTL_UMP_NEXT_DEVICE	_IOWR('U', 0x43, int)
+#define SNDRV_CTL_IOCTL_UMP_ENDPOINT_INFO _IOWR('U', 0x44, struct snd_ump_endpoint_info)
+#define SNDRV_CTL_IOCTL_UMP_BLOCK_INFO	_IOWR('U', 0x45, struct snd_ump_block_info)
+#define SNDRV_CTL_IOCTL_POWER		_IOWR('U', 0xd0, int)
+#define SNDRV_CTL_IOCTL_POWER_STATE	_IOR('U', 0xd1, int)
+
+/*
+ *  Read interface.
+ */
+
+enum sndrv_ctl_event_type {
+	SNDRV_CTL_EVENT_ELEM = 0,
+	SNDRV_CTL_EVENT_LAST = SNDRV_CTL_EVENT_ELEM,
+};
+
+#define SNDRV_CTL_EVENT_MASK_VALUE	(1<<0)	/* element value was changed */
+#define SNDRV_CTL_EVENT_MASK_INFO	(1<<1)	/* element info was changed */
+#define SNDRV_CTL_EVENT_MASK_ADD	(1<<2)	/* element was added */
+#define SNDRV_CTL_EVENT_MASK_TLV	(1<<3)	/* element TLV tree was changed */
+#define SNDRV_CTL_EVENT_MASK_REMOVE	(~0U)	/* element was removed */
+
+struct snd_ctl_event {
+	int type;	/* event type - SNDRV_CTL_EVENT_* */
+	union {
+		struct {
+			unsigned int mask;
+			struct snd_ctl_elem_id id;
+		} elem;
+		unsigned char data8[60];
+	} data;
+};
+
+/*
+ *  Control names
+ */
+
+#define SNDRV_CTL_NAME_NONE				""
+#define SNDRV_CTL_NAME_PLAYBACK				"Playback "
+#define SNDRV_CTL_NAME_CAPTURE				"Capture "
+
+#define SNDRV_CTL_NAME_IEC958_NONE			""
+#define SNDRV_CTL_NAME_IEC958_SWITCH			"Switch"
+#define SNDRV_CTL_NAME_IEC958_VOLUME			"Volume"
+#define SNDRV_CTL_NAME_IEC958_DEFAULT			"Default"
+#define SNDRV_CTL_NAME_IEC958_MASK			"Mask"
+#define SNDRV_CTL_NAME_IEC958_CON_MASK			"Con Mask"
+#define SNDRV_CTL_NAME_IEC958_PRO_MASK			"Pro Mask"
+#define SNDRV_CTL_NAME_IEC958_PCM_STREAM		"PCM Stream"
+#define SNDRV_CTL_NAME_IEC958(expl,direction,what)	"IEC958 " expl SNDRV_CTL_NAME_##direction SNDRV_CTL_NAME_IEC958_##what
+
+#endif /* _UAPI__SOUND_ASOUND_H */
diff --git a/tools/perf/trace/beauty/ioctl.c b/tools/perf/trace/beauty/ioctl.c
new file mode 100644
index 000000000..e19eb6ea3
--- /dev/null
+++ b/tools/perf/trace/beauty/ioctl.c
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: LGPL-2.1
+/*
+ * trace/beauty/ioctl.c
+ *
+ *  Copyright (C) 2017, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+ */
+
+#include "trace/beauty/beauty.h"
+#include <linux/kernel.h>
+
+/*
+ * FIXME: to support all arches we have to improve this, for
+ * now, to build on older systems without things like TIOCGEXCL,
+ * get it directly from our copy.
+ *
+ * Right now only x86 is being supported for beautifying ioctl args
+ * in 'perf trace', see tools/perf/trace/beauty/Build and builtin-trace.c
+ */
+#include <uapi/asm-generic/ioctls.h>
+
+static size_t ioctl__scnprintf_tty_cmd(int nr, int dir, char *bf, size_t size)
+{
+	static const char *ioctl_tty_cmd[] = {
+	[_IOC_NR(TCGETS)] = "TCGETS", "TCSETS", "TCSETSW", "TCSETSF", "TCGETA", "TCSETA", "TCSETAW",
+	"TCSETAF", "TCSBRK", "TCXONC", "TCFLSH", "TIOCEXCL", "TIOCNXCL", "TIOCSCTTY",
+	"TIOCGPGRP", "TIOCSPGRP", "TIOCOUTQ", "TIOCSTI", "TIOCGWINSZ", "TIOCSWINSZ",
+	"TIOCMGET", "TIOCMBIS", "TIOCMBIC", "TIOCMSET", "TIOCGSOFTCAR", "TIOCSSOFTCAR",
+	"FIONREAD", "TIOCLINUX", "TIOCCONS", "TIOCGSERIAL", "TIOCSSERIAL", "TIOCPKT",
+	"FIONBIO", "TIOCNOTTY", "TIOCSETD", "TIOCGETD", "TCSBRKP",
+	[_IOC_NR(TIOCSBRK)] = "TIOCSBRK", "TIOCCBRK", "TIOCGSID", "TCGETS2", "TCSETS2",
+	"TCSETSW2", "TCSETSF2", "TIOCGRS48", "TIOCSRS485", "TIOCGPTN", "TIOCSPTLCK",
+	"TIOCGDEV", "TCSETX", "TCSETXF", "TCSETXW", "TIOCSIG", "TIOCVHANGUP", "TIOCGPKT",
+	"TIOCGPTLCK", [_IOC_NR(TIOCGEXCL)] = "TIOCGEXCL", "TIOCGPTPEER",
+	"TIOCGISO7816", "TIOCSISO7816",
+	[_IOC_NR(FIONCLEX)] = "FIONCLEX", "FIOCLEX", "FIOASYNC", "TIOCSERCONFIG",
+	"TIOCSERGWILD", "TIOCSERSWILD", "TIOCGLCKTRMIOS", "TIOCSLCKTRMIOS",
+	"TIOCSERGSTRUCT", "TIOCSERGETLSR", "TIOCSERGETMULTI", "TIOCSERSETMULTI",
+	"TIOCMIWAIT", "TIOCGICOUNT", };
+	static DEFINE_STRARRAY(ioctl_tty_cmd, "");
+
+	if (nr < strarray__ioctl_tty_cmd.nr_entries && strarray__ioctl_tty_cmd.entries[nr] != NULL)
+		return scnprintf(bf, size, "%s", strarray__ioctl_tty_cmd.entries[nr]);
+
+	return scnprintf(bf, size, "(%#x, %#x, %#x)", 'T', nr, dir);
+}
+
+static size_t ioctl__scnprintf_drm_cmd(int nr, int dir, char *bf, size_t size)
+{
+#include "trace/beauty/generated/ioctl/drm_ioctl_array.c"
+	static DEFINE_STRARRAY(drm_ioctl_cmds, "");
+
+	if (nr < strarray__drm_ioctl_cmds.nr_entries && strarray__drm_ioctl_cmds.entries[nr] != NULL)
+		return scnprintf(bf, size, "DRM_%s", strarray__drm_ioctl_cmds.entries[nr]);
+
+	return scnprintf(bf, size, "(%#x, %#x, %#x)", 'd', nr, dir);
+}
+
+static size_t ioctl__scnprintf_sndrv_pcm_cmd(int nr, int dir, char *bf, size_t size)
+{
+#include "trace/beauty/generated/ioctl/sndrv_pcm_ioctl_array.c"
+	static DEFINE_STRARRAY(sndrv_pcm_ioctl_cmds, "");
+
+	if (nr < strarray__sndrv_pcm_ioctl_cmds.nr_entries && strarray__sndrv_pcm_ioctl_cmds.entries[nr] != NULL)
+		return scnprintf(bf, size, "SNDRV_PCM_%s", strarray__sndrv_pcm_ioctl_cmds.entries[nr]);
+
+	return scnprintf(bf, size, "(%#x, %#x, %#x)", 'A', nr, dir);
+}
+
+static size_t ioctl__scnprintf_sndrv_ctl_cmd(int nr, int dir, char *bf, size_t size)
+{
+#include "trace/beauty/generated/ioctl/sndrv_ctl_ioctl_array.c"
+	static DEFINE_STRARRAY(sndrv_ctl_ioctl_cmds, "");
+
+	if (nr < strarray__sndrv_ctl_ioctl_cmds.nr_entries && strarray__sndrv_ctl_ioctl_cmds.entries[nr] != NULL)
+		return scnprintf(bf, size, "SNDRV_CTL_%s", strarray__sndrv_ctl_ioctl_cmds.entries[nr]);
+
+	return scnprintf(bf, size, "(%#x, %#x, %#x)", 'U', nr, dir);
+}
+
+static size_t ioctl__scnprintf_kvm_cmd(int nr, int dir, char *bf, size_t size)
+{
+#include "trace/beauty/generated/ioctl/kvm_ioctl_array.c"
+	static DEFINE_STRARRAY(kvm_ioctl_cmds, "");
+
+	if (nr < strarray__kvm_ioctl_cmds.nr_entries && strarray__kvm_ioctl_cmds.entries[nr] != NULL)
+		return scnprintf(bf, size, "KVM_%s", strarray__kvm_ioctl_cmds.entries[nr]);
+
+	return scnprintf(bf, size, "(%#x, %#x, %#x)", 0xAE, nr, dir);
+}
+
+static size_t ioctl__scnprintf_vhost_virtio_cmd(int nr, int dir, char *bf, size_t size)
+{
+#include "trace/beauty/generated/ioctl/vhost_virtio_ioctl_array.c"
+	static DEFINE_STRARRAY(vhost_virtio_ioctl_cmds, "");
+	static DEFINE_STRARRAY(vhost_virtio_ioctl_read_cmds, "");
+	struct strarray *s = (dir & _IOC_READ) ? &strarray__vhost_virtio_ioctl_read_cmds : &strarray__vhost_virtio_ioctl_cmds;
+
+	if (nr < s->nr_entries && s->entries[nr] != NULL)
+		return scnprintf(bf, size, "VHOST_%s", s->entries[nr]);
+
+	return scnprintf(bf, size, "(%#x, %#x, %#x)", 0xAF, nr, dir);
+}
+
+static size_t ioctl__scnprintf_perf_cmd(int nr, int dir, char *bf, size_t size)
+{
+#include "trace/beauty/generated/ioctl/perf_ioctl_array.c"
+	static DEFINE_STRARRAY(perf_ioctl_cmds, "");
+
+	if (nr < strarray__perf_ioctl_cmds.nr_entries && strarray__perf_ioctl_cmds.entries[nr] != NULL)
+		return scnprintf(bf, size, "PERF_%s", strarray__perf_ioctl_cmds.entries[nr]);
+
+	return scnprintf(bf, size, "(%#x, %#x, %#x)", 0xAE, nr, dir);
+}
+
+static size_t ioctl__scnprintf_usbdevfs_cmd(int nr, int dir, char *bf, size_t size)
+{
+#include "trace/beauty/generated/ioctl/usbdevfs_ioctl_array.c"
+	static DEFINE_STRARRAY(usbdevfs_ioctl_cmds, "");
+
+	if (nr < strarray__usbdevfs_ioctl_cmds.nr_entries && strarray__usbdevfs_ioctl_cmds.entries[nr] != NULL)
+		return scnprintf(bf, size, "USBDEVFS_%s", strarray__usbdevfs_ioctl_cmds.entries[nr]);
+
+	return scnprintf(bf, size, "(%c, %#x, %#x)", 'U', nr, dir);
+}
+
+static size_t ioctl__scnprintf_cmd(unsigned long cmd, char *bf, size_t size, bool show_prefix)
+{
+	const char *prefix = "_IOC_";
+	int dir	 = _IOC_DIR(cmd),
+	    type = _IOC_TYPE(cmd),
+	    nr	 = _IOC_NR(cmd),
+	    sz	 = _IOC_SIZE(cmd);
+	int printed = 0;
+	static const struct ioctl_type {
+		int	type;
+		size_t	(*scnprintf)(int nr, int dir, char *bf, size_t size);
+	} ioctl_types[] = { /* Must be ordered by type */
+			      { .type	= '$', .scnprintf = ioctl__scnprintf_perf_cmd, },
+		['A' - '$'] = { .type	= 'A', .scnprintf = ioctl__scnprintf_sndrv_pcm_cmd, },
+		['T' - '$'] = { .type	= 'T', .scnprintf = ioctl__scnprintf_tty_cmd, },
+		['U' - '$'] = { .type	= 'U', .scnprintf = ioctl__scnprintf_sndrv_ctl_cmd, },
+		['d' - '$'] = { .type	= 'd', .scnprintf = ioctl__scnprintf_drm_cmd, },
+		[0xAE - '$'] = { .type	= 0xAE, .scnprintf = ioctl__scnprintf_kvm_cmd, },
+		[0xAF - '$'] = { .type	= 0xAF, .scnprintf = ioctl__scnprintf_vhost_virtio_cmd, },
+	};
+	const int nr_types = ARRAY_SIZE(ioctl_types);
+
+	if (type >= ioctl_types[0].type && type <= ioctl_types[nr_types - 1].type) {
+		const int index = type - ioctl_types[0].type;
+
+		if (ioctl_types[index].scnprintf != NULL)
+			return ioctl_types[index].scnprintf(nr, dir, bf, size);
+	}
+
+	printed += scnprintf(bf + printed, size - printed, "%c", '(');
+
+	if (dir == _IOC_NONE) {
+		printed += scnprintf(bf + printed, size - printed, "%s%s", show_prefix ? prefix : "", "NONE");
+	} else {
+		if (dir & _IOC_READ)
+			printed += scnprintf(bf + printed, size - printed, "%s%s", show_prefix ? prefix : "", "READ");
+		if (dir & _IOC_WRITE) {
+			printed += scnprintf(bf + printed, size - printed, "%s%s%s", dir & _IOC_READ ? "|" : "",
+					     show_prefix ? prefix : "",  "WRITE");
+		}
+	}
+
+	return printed + scnprintf(bf + printed, size - printed, ", %#x, %#x, %#x)", type, nr, sz);
+}
+
+#ifndef USB_DEVICE_MAJOR
+#define USB_DEVICE_MAJOR 189
+#endif // USB_DEVICE_MAJOR
+
+size_t syscall_arg__scnprintf_ioctl_cmd(char *bf, size_t size, struct syscall_arg *arg)
+{
+	unsigned long cmd = arg->val;
+	int fd = syscall_arg__val(arg, 0);
+	struct file *file = thread__files_entry(arg->thread, fd);
+
+	if (file != NULL) {
+		if (file->dev_maj == USB_DEVICE_MAJOR)
+			return ioctl__scnprintf_usbdevfs_cmd(_IOC_NR(cmd), _IOC_DIR(cmd), bf, size);
+	}
+
+	return ioctl__scnprintf_cmd(cmd, bf, size, arg->show_string_prefix);
+}
diff --git a/tools/perf/trace/beauty/kcmp.c b/tools/perf/trace/beauty/kcmp.c
new file mode 100644
index 000000000..9351f8439
--- /dev/null
+++ b/tools/perf/trace/beauty/kcmp.c
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: LGPL-2.1
+/*
+ * trace/beauty/kcmp.c
+ *
+ *  Copyright (C) 2017, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+ */
+
+#include "trace/beauty/beauty.h"
+#include <linux/kernel.h>
+#include <sys/types.h>
+#include <machine.h>
+#include <uapi/linux/kcmp.h>
+
+#include "trace/beauty/generated/kcmp_type_array.c"
+
+size_t syscall_arg__scnprintf_kcmp_idx(char *bf, size_t size, struct syscall_arg *arg)
+{
+	unsigned long fd = arg->val;
+	int type = syscall_arg__val(arg, 2);
+	pid_t pid;
+
+	if (type != KCMP_FILE)
+		return syscall_arg__scnprintf_long(bf, size, arg);
+
+	pid = syscall_arg__val(arg, arg->idx == 3 ? 0 : 1); /* idx1 -> pid1, idx2 -> pid2 */
+	return pid__scnprintf_fd(arg->trace, pid, fd, bf, size);
+}
+
+static size_t kcmp__scnprintf_type(int type, char *bf, size_t size, bool show_prefix)
+{
+	static DEFINE_STRARRAY(kcmp_types, "KCMP_");
+	return strarray__scnprintf(&strarray__kcmp_types, bf, size, "%d", show_prefix, type);
+}
+
+size_t syscall_arg__scnprintf_kcmp_type(char *bf, size_t size, struct syscall_arg *arg)
+{
+	unsigned long type = arg->val;
+
+	if (type != KCMP_FILE)
+		arg->mask |= (1 << 3) | (1 << 4); /* Ignore idx1 and idx2 */
+
+	return kcmp__scnprintf_type(type, bf, size, arg->show_string_prefix);
+}
diff --git a/tools/perf/trace/beauty/kcmp_type.sh b/tools/perf/trace/beauty/kcmp_type.sh
new file mode 100755
index 000000000..5df9dcbd6
--- /dev/null
+++ b/tools/perf/trace/beauty/kcmp_type.sh
@@ -0,0 +1,11 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+[ $# -eq 1 ] && header_dir=$1 || header_dir=tools/include/uapi/linux/
+
+printf "static const char *kcmp_types[] = {\n"
+regex='^[[:space:]]+(KCMP_(\w+)),'
+grep -E $regex ${header_dir}/kcmp.h | grep -v KCMP_TYPES, | \
+	sed -r "s/$regex/\1 \2/g" | \
+	xargs printf "\t[%s]\t= \"%s\",\n"
+printf "};\n"
diff --git a/tools/perf/trace/beauty/kvm_ioctl.sh b/tools/perf/trace/beauty/kvm_ioctl.sh
new file mode 100755
index 000000000..bd0efd45f
--- /dev/null
+++ b/tools/perf/trace/beauty/kvm_ioctl.sh
@@ -0,0 +1,12 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+[ $# -eq 1 ] && header_dir=$1 || header_dir=tools/include/uapi/linux/
+
+printf "static const char *kvm_ioctl_cmds[] = {\n"
+regex='^#[[:space:]]*define[[:space:]]+KVM_(\w+)[[:space:]]+_IO[RW]*\([[:space:]]*KVMIO[[:space:]]*,[[:space:]]*(0x[[:xdigit:]]+).*'
+grep -E $regex ${header_dir}/kvm.h	| \
+	sed -r "s/$regex/\2 \1/g"	| \
+	grep -E -v " ((ARM|PPC|S390)_|[GS]ET_(DEBUGREGS|PIT2|XSAVE|TSC_KHZ)|CREATE_SPAPR_TCE_64)" | \
+	sort | xargs printf "\t[%s] = \"%s\",\n"
+printf "};\n"
diff --git a/tools/perf/trace/beauty/madvise_behavior.sh b/tools/perf/trace/beauty/madvise_behavior.sh
new file mode 100755
index 000000000..c659c33bf
--- /dev/null
+++ b/tools/perf/trace/beauty/madvise_behavior.sh
@@ -0,0 +1,11 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+[ $# -eq 1 ] && header_dir=$1 || header_dir=tools/include/uapi/asm-generic/
+
+printf "static const char *madvise_advices[] = {\n"
+regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+MADV_([[:alnum:]_]+)[[:space:]]+([[:digit:]]+)[[:space:]]*.*'
+grep -E $regex ${header_dir}/mman-common.h | \
+	sed -r "s/$regex/\2 \1/g"	| \
+	sort -n | xargs printf "\t[%s] = \"%s\",\n"
+printf "};\n"
diff --git a/tools/perf/trace/beauty/mmap.c b/tools/perf/trace/beauty/mmap.c
new file mode 100644
index 000000000..c8a4cd49c
--- /dev/null
+++ b/tools/perf/trace/beauty/mmap.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: LGPL-2.1
+#include <linux/log2.h>
+#include "trace/beauty/beauty.h"
+
+#include "trace/beauty/generated/mmap_prot_array.c"
+static DEFINE_STRARRAY(mmap_prot, "PROT_");
+
+static size_t mmap__scnprintf_prot(unsigned long prot, char *bf, size_t size, bool show_prefix)
+{
+       return strarray__scnprintf_flags(&strarray__mmap_prot, bf, size, show_prefix, prot);
+}
+size_t syscall_arg__scnprintf_mmap_prot(char *bf, size_t size, struct syscall_arg *arg)
+{
+	unsigned long prot = arg->val;
+
+	if (prot == 0)
+		return scnprintf(bf, size, "%sNONE", arg->show_string_prefix ? strarray__mmap_prot.prefix : "");
+
+	return mmap__scnprintf_prot(prot, bf, size, arg->show_string_prefix);
+}
+
+
+
+#include "trace/beauty/generated/mmap_flags_array.c"
+DEFINE_STRARRAY(mmap_flags, "MAP_");
+
+static size_t mmap__scnprintf_flags(unsigned long flags, char *bf, size_t size, bool show_prefix)
+{
+       return strarray__scnprintf_flags(&strarray__mmap_flags, bf, size, show_prefix, flags);
+}
+
+size_t syscall_arg__scnprintf_mmap_flags(char *bf, size_t size,
+					 struct syscall_arg *arg)
+{
+	unsigned long flags = arg->val;
+
+	if (flags & MAP_ANONYMOUS)
+		arg->mask |= (1 << 4) | (1 << 5); /* Mask 4th ('fd') and 5th ('offset') args, ignored */
+
+	return mmap__scnprintf_flags(flags, bf, size, arg->show_string_prefix);
+}
+
+
+
+#include "trace/beauty/generated/mremap_flags_array.c"
+static DEFINE_STRARRAY(mremap_flags, "MREMAP_");
+
+static size_t mremap__scnprintf_flags(unsigned long flags, char *bf, size_t size, bool show_prefix)
+{
+       return strarray__scnprintf_flags(&strarray__mremap_flags, bf, size, show_prefix, flags);
+}
+
+size_t syscall_arg__scnprintf_mremap_flags(char *bf, size_t size, struct syscall_arg *arg)
+{
+	unsigned long flags = arg->val;
+
+	if (!(flags & MREMAP_FIXED))
+		arg->mask |=  (1 << 5); /* Mask 5th ('new_address') args, ignored */
+
+	return mremap__scnprintf_flags(flags, bf, size, arg->show_string_prefix);
+}
+
+
+
+static size_t madvise__scnprintf_behavior(int behavior, char *bf, size_t size)
+{
+#include "trace/beauty/generated/madvise_behavior_array.c"
+       static DEFINE_STRARRAY(madvise_advices, "MADV_");
+
+       if (behavior < strarray__madvise_advices.nr_entries && strarray__madvise_advices.entries[behavior] != NULL)
+               return scnprintf(bf, size, "MADV_%s", strarray__madvise_advices.entries[behavior]);
+
+       return scnprintf(bf, size, "%#", behavior);
+}
+
+size_t syscall_arg__scnprintf_madvise_behavior(char *bf, size_t size,
+					       struct syscall_arg *arg)
+{
+	return madvise__scnprintf_behavior(arg->val, bf, size);
+}
diff --git a/tools/perf/trace/beauty/mmap_flags.sh b/tools/perf/trace/beauty/mmap_flags.sh
new file mode 100755
index 000000000..6ecdb3c5a
--- /dev/null
+++ b/tools/perf/trace/beauty/mmap_flags.sh
@@ -0,0 +1,43 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+if [ $# -ne 3 ] ; then
+	[ $# -eq 1 ] && hostarch=$1 || hostarch=`uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/`
+	linux_header_dir=tools/include/uapi/linux
+	header_dir=tools/include/uapi/asm-generic
+	arch_header_dir=tools/arch/${hostarch}/include/uapi/asm
+else
+	linux_header_dir=$1
+	header_dir=$2
+	arch_header_dir=$3
+fi
+
+linux_mman=${linux_header_dir}/mman.h
+arch_mman=${arch_header_dir}/mman.h
+
+# those in grep -E -vw are flags, we want just the bits
+
+printf "static const char *mmap_flags[] = {\n"
+regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+MAP_([[:alnum:]_]+)[[:space:]]+(0x[[:xdigit:]]+)[[:space:]]*.*'
+test -f ${arch_mman} && \
+grep -E -q $regex ${arch_mman} && \
+(grep -E $regex ${arch_mman} | \
+	sed -r "s/$regex/\2 \1 \1 \1 \2/g"	| \
+	xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n#ifndef MAP_%s\n#define MAP_%s %s\n#endif\n")
+grep -E -q $regex ${linux_mman} && \
+(grep -E $regex ${linux_mman} | \
+	grep -E -vw 'MAP_(UNINITIALIZED|TYPE|SHARED_VALIDATE)' | \
+	sed -r "s/$regex/\2 \1 \1 \1 \2/g" | \
+	xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n#ifndef MAP_%s\n#define MAP_%s %s\n#endif\n")
+( ! test -f ${arch_mman} || \
+grep -E -q '#[[:space:]]*include[[:space:]]+.*uapi/asm-generic/mman.*' ${arch_mman}) &&
+(grep -E $regex ${header_dir}/mman-common.h | \
+	grep -E -vw 'MAP_(UNINITIALIZED|TYPE|SHARED_VALIDATE)' | \
+	sed -r "s/$regex/\2 \1 \1 \1 \2/g"	| \
+	xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n#ifndef MAP_%s\n#define MAP_%s %s\n#endif\n")
+( ! test -f ${arch_mman} || \
+grep -E -q '#[[:space:]]*include[[:space:]]+.*uapi/asm-generic/mman.h>.*' ${arch_mman}) &&
+(grep -E $regex ${header_dir}/mman.h | \
+	sed -r "s/$regex/\2 \1 \1 \1 \2/g"	| \
+	xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n#ifndef MAP_%s\n#define MAP_%s %s\n#endif\n")
+printf "};\n"
diff --git a/tools/perf/trace/beauty/mmap_prot.sh b/tools/perf/trace/beauty/mmap_prot.sh
new file mode 100755
index 000000000..4436fcd6e
--- /dev/null
+++ b/tools/perf/trace/beauty/mmap_prot.sh
@@ -0,0 +1,31 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+if [ $# -ne 2 ] ; then
+	[ $# -eq 1 ] && hostarch=$1 || hostarch=`uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/`
+	asm_header_dir=tools/include/uapi/asm-generic
+	arch_header_dir=tools/arch/${hostarch}/include/uapi/asm
+else
+	asm_header_dir=$1
+	arch_header_dir=$2
+fi
+
+common_mman=${asm_header_dir}/mman-common.h
+arch_mman=${arch_header_dir}/mman.h
+
+prefix="PROT"
+
+printf "static const char *mmap_prot[] = {\n"
+regex=`printf '^[[:space:]]*#[[:space:]]*define[[:space:]]+%s_([[:alnum:]_]+)[[:space:]]+(0x[[:xdigit:]]+)[[:space:]]*.*' ${prefix}`
+( ! test -f ${arch_mman} \
+|| grep -E -q '#[[:space:]]*include[[:space:]]+.*uapi/asm-generic/mman.*' ${arch_mman}) &&
+(grep -E $regex ${common_mman} | \
+	grep -E -vw PROT_NONE | \
+	sed -r "s/$regex/\2 \1 \1 \1 \2/g"	| \
+	xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n#ifndef ${prefix}_%s\n#define ${prefix}_%s %s\n#endif\n")
+test -f ${arch_mman} && grep -E -q $regex ${arch_mman} &&
+(grep -E $regex ${arch_mman} | \
+	grep -E -vw PROT_NONE | \
+	sed -r "s/$regex/\2 \1 \1 \1 \2/g"	| \
+	xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n#ifndef ${prefix}_%s\n#define ${prefix}_%s %s\n#endif\n")
+printf "};\n"
diff --git a/tools/perf/trace/beauty/mode_t.c b/tools/perf/trace/beauty/mode_t.c
new file mode 100644
index 000000000..9304b0bf3
--- /dev/null
+++ b/tools/perf/trace/beauty/mode_t.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: LGPL-2.1
+#include "trace/beauty/beauty.h"
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <unistd.h>
+
+/* From include/linux/stat.h */
+#ifndef S_IRWXUGO
+#define S_IRWXUGO	(S_IRWXU|S_IRWXG|S_IRWXO)
+#endif
+#ifndef S_IALLUGO
+#define S_IALLUGO	(S_ISUID|S_ISGID|S_ISVTX|S_IRWXUGO)
+#endif
+#ifndef S_IRUGO
+#define S_IRUGO         (S_IRUSR|S_IRGRP|S_IROTH)
+#endif
+#ifndef S_IWUGO
+#define S_IWUGO         (S_IWUSR|S_IWGRP|S_IWOTH)
+#endif
+#ifndef S_IXUGO
+#define S_IXUGO         (S_IXUSR|S_IXGRP|S_IXOTH)
+#endif
+
+size_t syscall_arg__scnprintf_mode_t(char *bf, size_t size, struct syscall_arg *arg)
+{
+	bool show_prefix = arg->show_string_prefix;
+	const char *prefix = "S_";
+	int printed = 0, mode = arg->val;
+
+#define	P_MODE(n) \
+	if ((mode & S_##n) == S_##n) { \
+		printed += scnprintf(bf + printed, size - printed, "%s%s%s", printed ? "|" : "", show_prefix ? prefix : "", #n); \
+		mode &= ~S_##n; \
+	}
+
+	P_MODE(IALLUGO);
+	P_MODE(IRWXUGO);
+	P_MODE(IRUGO);
+	P_MODE(IWUGO);
+	P_MODE(IXUGO);
+	P_MODE(IFMT);
+	P_MODE(IFSOCK);
+	P_MODE(IFLNK);
+	P_MODE(IFREG);
+	P_MODE(IFBLK);
+	P_MODE(IFDIR);
+	P_MODE(IFCHR);
+	P_MODE(IFIFO);
+	P_MODE(ISUID);
+	P_MODE(ISGID);
+	P_MODE(ISVTX);
+	P_MODE(IRWXU);
+	P_MODE(IRUSR);
+	P_MODE(IWUSR);
+	P_MODE(IXUSR);
+	P_MODE(IRWXG);
+	P_MODE(IRGRP);
+	P_MODE(IWGRP);
+	P_MODE(IXGRP);
+	P_MODE(IRWXO);
+	P_MODE(IROTH);
+	P_MODE(IWOTH);
+	P_MODE(IXOTH);
+#undef P_MODE
+
+	if (mode)
+		printed += scnprintf(bf + printed, size - printed, "%s%#x", printed ? "|" : "", mode);
+
+	return printed;
+}
diff --git a/tools/perf/trace/beauty/mount_flags.c b/tools/perf/trace/beauty/mount_flags.c
new file mode 100644
index 000000000..10fb14cfa
--- /dev/null
+++ b/tools/perf/trace/beauty/mount_flags.c
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: LGPL-2.1
+/*
+ * trace/beauty/mount_flags.c
+ *
+ *  Copyright (C) 2018, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+ */
+
+#include "trace/beauty/beauty.h"
+#include <linux/compiler.h>
+#include <linux/kernel.h>
+#include <linux/log2.h>
+#include <sys/mount.h>
+
+static size_t mount__scnprintf_flags(unsigned long flags, char *bf, size_t size, bool show_prefix)
+{
+#include "trace/beauty/generated/mount_flags_array.c"
+	static DEFINE_STRARRAY(mount_flags, "MS_");
+
+	return strarray__scnprintf_flags(&strarray__mount_flags, bf, size, show_prefix, flags);
+}
+
+unsigned long syscall_arg__mask_val_mount_flags(struct syscall_arg *arg __maybe_unused, unsigned long flags)
+{
+	// do_mount in fs/namespace.c:
+	/*
+	 * Pre-0.97 versions of mount() didn't have a flags word.  When the
+	 * flags word was introduced its top half was required to have the
+	 * magic value 0xC0ED, and this remained so until 2.4.0-test9.
+	 * Therefore, if this magic number is present, it carries no
+	 * information and must be discarded.
+	 */
+	if ((flags & MS_MGC_MSK) == MS_MGC_VAL)
+		flags &= ~MS_MGC_MSK;
+
+	return flags;
+}
+
+size_t syscall_arg__scnprintf_mount_flags(char *bf, size_t size, struct syscall_arg *arg)
+{
+	unsigned long flags = arg->val;
+
+	return mount__scnprintf_flags(flags, bf, size, arg->show_string_prefix);
+}
diff --git a/tools/perf/trace/beauty/mount_flags.sh b/tools/perf/trace/beauty/mount_flags.sh
new file mode 100755
index 000000000..ff578f7b4
--- /dev/null
+++ b/tools/perf/trace/beauty/mount_flags.sh
@@ -0,0 +1,15 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+[ $# -eq 1 ] && beauty_uapi_linux_dir=$1 || beauty_uapi_linux_dir=tools/perf/trace/beauty/include/uapi/linux/
+
+printf "static const char *mount_flags[] = {\n"
+regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+MS_([[:alnum:]_]+)[[:space:]]+([[:digit:]]+)[[:space:]]*.*'
+grep -E $regex ${beauty_uapi_linux_dir}/mount.h | grep -E -v '(MSK|VERBOSE|MGC_VAL)\>' | \
+	sed -r "s/$regex/\2 \2 \1/g" | sort -n | \
+	xargs printf "\t[%s ? (ilog2(%s) + 1) : 0] = \"%s\",\n"
+regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+MS_([[:alnum:]_]+)[[:space:]]+\(1<<([[:digit:]]+)\)[[:space:]]*.*'
+grep -E $regex ${beauty_uapi_linux_dir}/mount.h | \
+	sed -r "s/$regex/\2 \1/g" | \
+	xargs printf "\t[%s + 1] = \"%s\",\n"
+printf "};\n"
diff --git a/tools/perf/trace/beauty/move_mount.c b/tools/perf/trace/beauty/move_mount.c
new file mode 100644
index 000000000..78ed80395
--- /dev/null
+++ b/tools/perf/trace/beauty/move_mount.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: LGPL-2.1
+/*
+ * trace/beauty/move_mount.c
+ *
+ *  Copyright (C) 2019, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+ */
+
+#include "trace/beauty/beauty.h"
+#include <linux/log2.h>
+
+static size_t move_mount__scnprintf_flags(unsigned long flags, char *bf, size_t size, bool show_prefix)
+{
+#include "trace/beauty/generated/move_mount_flags_array.c"
+       static DEFINE_STRARRAY(move_mount_flags, "MOVE_MOUNT_");
+
+       return strarray__scnprintf_flags(&strarray__move_mount_flags, bf, size, show_prefix, flags);
+}
+
+size_t syscall_arg__scnprintf_move_mount_flags(char *bf, size_t size, struct syscall_arg *arg)
+{
+	unsigned long flags = arg->val;
+
+	return move_mount__scnprintf_flags(flags, bf, size, arg->show_string_prefix);
+}
diff --git a/tools/perf/trace/beauty/move_mount_flags.sh b/tools/perf/trace/beauty/move_mount_flags.sh
new file mode 100755
index 000000000..c0dde9020
--- /dev/null
+++ b/tools/perf/trace/beauty/move_mount_flags.sh
@@ -0,0 +1,17 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+if [ $# -ne 1 ] ; then
+	beauty_uapi_linux_dir=tools/perf/trace/beauty/include/uapi/linux/
+else
+	beauty_uapi_linux_dir=$1
+fi
+
+linux_mount=${beauty_uapi_linux_dir}/mount.h
+
+printf "static const char *move_mount_flags[] = {\n"
+regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+MOVE_MOUNT_([^_]+[[:alnum:]_]+)[[:space:]]+(0x[[:xdigit:]]+)[[:space:]]*.*'
+grep -E $regex ${linux_mount} | \
+	sed -r "s/$regex/\2 \1/g"	| \
+	xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n"
+printf "};\n"
diff --git a/tools/perf/trace/beauty/mremap_flags.sh b/tools/perf/trace/beauty/mremap_flags.sh
new file mode 100755
index 000000000..4d0183501
--- /dev/null
+++ b/tools/perf/trace/beauty/mremap_flags.sh
@@ -0,0 +1,18 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+if [ $# -ne 1 ] ; then
+	linux_header_dir=tools/include/uapi/linux
+else
+	linux_header_dir=$1
+fi
+
+linux_mman=${linux_header_dir}/mman.h
+
+printf "static const char *mremap_flags[] = {\n"
+regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+MREMAP_([[:alnum:]_]+)[[:space:]]+((0x)?[[:xdigit:]]+)[[:space:]]*.*'
+grep -E -q $regex ${linux_mman} && \
+(grep -E $regex ${linux_mman} | \
+	sed -r "s/$regex/\2 \1 \1 \1 \2/g"	| \
+	xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n#ifndef MREMAP_%s\n#define MREMAP_%s %s\n#endif\n")
+printf "};\n"
diff --git a/tools/perf/trace/beauty/msg_flags.c b/tools/perf/trace/beauty/msg_flags.c
new file mode 100644
index 000000000..be7f82677
--- /dev/null
+++ b/tools/perf/trace/beauty/msg_flags.c
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: LGPL-2.1
+#include "trace/beauty/beauty.h"
+
+#include <sys/types.h>
+#include <sys/socket.h>
+
+#ifndef MSG_PROBE
+#define MSG_PROBE		     0x10
+#endif
+#ifndef MSG_WAITFORONE
+#define MSG_WAITFORONE		   0x10000
+#endif
+#ifndef MSG_BATCH
+#define MSG_BATCH		   0x40000
+#endif
+#ifndef MSG_SOCK_DEVMEM
+#define MSG_SOCK_DEVMEM		 0x2000000
+#endif
+#ifndef MSG_ZEROCOPY
+#define MSG_ZEROCOPY		 0x4000000
+#endif
+#ifndef MSG_SPLICE_PAGES
+#define MSG_SPLICE_PAGES	0x8000000
+#endif
+#ifndef MSG_FASTOPEN
+#define MSG_FASTOPEN		0x20000000
+#endif
+#ifndef MSG_CMSG_CLOEXEC
+# define MSG_CMSG_CLOEXEC	0x40000000
+#endif
+
+size_t syscall_arg__scnprintf_msg_flags(char *bf, size_t size,
+					struct syscall_arg *arg)
+{
+	bool show_prefix = arg->show_string_prefix;
+	const char *prefix = "MSG_";
+	int printed = 0, flags = arg->val;
+
+	if (flags == 0)
+		return scnprintf(bf, size, "NONE");
+#define	P_MSG_FLAG(n) \
+	if (flags & MSG_##n) { \
+		printed += scnprintf(bf + printed, size - printed, "%s%s%s", printed ? "|" : "", show_prefix ? prefix : "", #n); \
+		flags &= ~MSG_##n; \
+	}
+
+	P_MSG_FLAG(OOB);
+	P_MSG_FLAG(PEEK);
+	P_MSG_FLAG(DONTROUTE);
+	P_MSG_FLAG(CTRUNC);
+	P_MSG_FLAG(PROBE);
+	P_MSG_FLAG(TRUNC);
+	P_MSG_FLAG(DONTWAIT);
+	P_MSG_FLAG(EOR);
+	P_MSG_FLAG(WAITALL);
+	P_MSG_FLAG(FIN);
+	P_MSG_FLAG(SYN);
+	P_MSG_FLAG(CONFIRM);
+	P_MSG_FLAG(RST);
+	P_MSG_FLAG(ERRQUEUE);
+	P_MSG_FLAG(NOSIGNAL);
+	P_MSG_FLAG(MORE);
+	P_MSG_FLAG(WAITFORONE);
+	P_MSG_FLAG(BATCH);
+	P_MSG_FLAG(SOCK_DEVMEM);
+	P_MSG_FLAG(ZEROCOPY);
+	P_MSG_FLAG(SPLICE_PAGES);
+	P_MSG_FLAG(FASTOPEN);
+	P_MSG_FLAG(CMSG_CLOEXEC);
+#undef P_MSG_FLAG
+
+	if (flags)
+		printed += scnprintf(bf + printed, size - printed, "%s%#x", printed ? "|" : "", flags);
+
+	return printed;
+}
diff --git a/tools/perf/trace/beauty/open_flags.c b/tools/perf/trace/beauty/open_flags.c
new file mode 100644
index 000000000..c2c7769e6
--- /dev/null
+++ b/tools/perf/trace/beauty/open_flags.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: LGPL-2.1
+#include "trace/beauty/beauty.h"
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+
+#ifndef O_DIRECT
+#define O_DIRECT	00040000
+#endif
+
+#ifndef O_DIRECTORY
+#define O_DIRECTORY	00200000
+#endif
+
+#ifndef O_NOATIME
+#define O_NOATIME	01000000
+#endif
+
+#ifndef O_TMPFILE
+#define O_TMPFILE	020000000
+#endif
+
+#undef O_LARGEFILE
+#define O_LARGEFILE	00100000
+
+size_t open__scnprintf_flags(unsigned long flags, char *bf, size_t size, bool show_prefix)
+{
+	const char *prefix = "O_";
+	int printed = 0;
+
+	if ((flags & O_ACCMODE) == O_RDONLY)
+		printed = scnprintf(bf, size, "%s%s", show_prefix ? prefix : "", "RDONLY");
+	if (flags == 0)
+		return printed;
+#define	P_FLAG(n) \
+	if (flags & O_##n) { \
+		printed += scnprintf(bf + printed, size - printed, "%s%s%s", printed ? "|" : "", show_prefix ? prefix : "", #n); \
+		flags &= ~O_##n; \
+	}
+
+	P_FLAG(RDWR);
+	P_FLAG(APPEND);
+	P_FLAG(ASYNC);
+	P_FLAG(CLOEXEC);
+	P_FLAG(CREAT);
+	P_FLAG(DIRECT);
+	P_FLAG(DIRECTORY);
+	P_FLAG(EXCL);
+	P_FLAG(LARGEFILE);
+	P_FLAG(NOFOLLOW);
+	P_FLAG(TMPFILE);
+	P_FLAG(NOATIME);
+	P_FLAG(NOCTTY);
+#ifdef O_NONBLOCK
+	P_FLAG(NONBLOCK);
+#elif O_NDELAY
+	P_FLAG(NDELAY);
+#endif
+#ifdef O_PATH
+	P_FLAG(PATH);
+#endif
+#ifdef O_DSYNC
+	if ((flags & O_SYNC) == O_SYNC)
+		printed += scnprintf(bf + printed, size - printed, "%s%s%s", printed ? "|" : "", show_prefix ? prefix : "", "SYNC");
+	else {
+		P_FLAG(DSYNC);
+	}
+#else
+	P_FLAG(SYNC);
+#endif
+	P_FLAG(TRUNC);
+	P_FLAG(WRONLY);
+#undef P_FLAG
+
+	if (flags)
+		printed += scnprintf(bf + printed, size - printed, "%s%#x", printed ? "|" : "", flags);
+
+	return printed;
+}
+
+size_t syscall_arg__scnprintf_open_flags(char *bf, size_t size, struct syscall_arg *arg)
+{
+	int flags = arg->val;
+
+	if (!(flags & O_CREAT))
+		arg->mask |= 1 << (arg->idx + 1); /* Mask the mode parm */
+
+	return open__scnprintf_flags(flags, bf, size, arg->show_string_prefix);
+}
diff --git a/tools/perf/trace/beauty/perf_event_open.c b/tools/perf/trace/beauty/perf_event_open.c
new file mode 100644
index 000000000..6315b46bc
--- /dev/null
+++ b/tools/perf/trace/beauty/perf_event_open.c
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: LGPL-2.1
+#include <string.h>
+#include "trace/beauty/beauty.h"
+#include "util/evsel_fprintf.h"
+#include <linux/perf_event.h>
+
+#ifndef PERF_FLAG_FD_NO_GROUP
+# define PERF_FLAG_FD_NO_GROUP		(1UL << 0)
+#endif
+
+#ifndef PERF_FLAG_FD_OUTPUT
+# define PERF_FLAG_FD_OUTPUT		(1UL << 1)
+#endif
+
+#ifndef PERF_FLAG_PID_CGROUP
+# define PERF_FLAG_PID_CGROUP		(1UL << 2) /* pid=cgroup id, per-cpu mode only */
+#endif
+
+#ifndef PERF_FLAG_FD_CLOEXEC
+# define PERF_FLAG_FD_CLOEXEC		(1UL << 3) /* O_CLOEXEC */
+#endif
+
+size_t syscall_arg__scnprintf_perf_flags(char *bf, size_t size,
+					 struct syscall_arg *arg)
+{
+	bool show_prefix = arg->show_string_prefix;
+	const char *prefix = "PERF_";
+	int printed = 0, flags = arg->val;
+
+	if (flags == 0)
+		return 0;
+
+#define	P_FLAG(n) \
+	if (flags & PERF_FLAG_##n) { \
+		printed += scnprintf(bf + printed, size - printed, "%s%s%s", printed ? "|" : "", show_prefix ? prefix : "", #n); \
+		flags &= ~PERF_FLAG_##n; \
+	}
+
+	P_FLAG(FD_NO_GROUP);
+	P_FLAG(FD_OUTPUT);
+	P_FLAG(PID_CGROUP);
+	P_FLAG(FD_CLOEXEC);
+#undef P_FLAG
+
+	if (flags)
+		printed += scnprintf(bf + printed, size - printed, "%s%#x", printed ? "|" : "", flags);
+
+	return printed;
+}
+
+
+
+struct attr_fprintf_args {
+	size_t size, printed;
+	char *bf;
+	bool first;
+};
+
+static int attr__fprintf(FILE *fp __maybe_unused, const char *name, const char *val, void *priv)
+{
+	struct attr_fprintf_args *args = priv;
+	size_t printed = scnprintf(args->bf + args->printed , args->size - args->printed, "%s%s: %s", args->first ? "" : ", ", name, val);
+
+	args->first = false;
+	args->printed += printed;
+	return printed;
+}
+
+static size_t perf_event_attr___scnprintf(struct perf_event_attr *attr, char *bf, size_t size, bool show_zeros __maybe_unused)
+{
+	struct attr_fprintf_args args = {
+		.printed = scnprintf(bf, size, "{ "),
+		.size    = size,
+		.first   = true,
+		.bf	 = bf,
+	};
+
+	perf_event_attr__fprintf(stdout, attr, attr__fprintf, &args);
+	return args.printed + scnprintf(bf + args.printed, size - args.printed, " }");
+}
+
+static size_t syscall_arg__scnprintf_augmented_perf_event_attr(struct syscall_arg *arg, char *bf, size_t size)
+{
+	struct perf_event_attr *attr = (void *)arg->augmented.args->value;
+	struct perf_event_attr local_attr;
+
+	/*
+	 * augmented_raw_syscalls.bpf.c (shipped with perf) copies
+	 * PERF_ATTR_SIZE_VER0 bytes when the tracee passes size=0,
+	 * but leaves the size field as 0.  The payload size is
+	 * guaranteed by perf's own BPF program, not externally
+	 * controllable.  Copy to a local so we can fix up size
+	 * without writing to the potentially read-only augmented
+	 * args buffer.
+	 */
+	if (!attr->size) {
+		memcpy(&local_attr, attr, PERF_ATTR_SIZE_VER0);
+		memset((void *)&local_attr + PERF_ATTR_SIZE_VER0, 0,
+		       sizeof(local_attr) - PERF_ATTR_SIZE_VER0);
+		local_attr.size = PERF_ATTR_SIZE_VER0;
+		attr = &local_attr;
+	}
+
+	return perf_event_attr___scnprintf(attr, bf, size,
+					   trace__show_zeros(arg->trace));
+}
+
+size_t syscall_arg__scnprintf_perf_event_attr(char *bf, size_t size, struct syscall_arg *arg)
+{
+	if (arg->augmented.args)
+		return syscall_arg__scnprintf_augmented_perf_event_attr(arg, bf, size);
+
+	return scnprintf(bf, size, "%#lx", arg->val);
+}
diff --git a/tools/perf/trace/beauty/perf_ioctl.sh b/tools/perf/trace/beauty/perf_ioctl.sh
new file mode 100755
index 000000000..06c2774f3
--- /dev/null
+++ b/tools/perf/trace/beauty/perf_ioctl.sh
@@ -0,0 +1,11 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+[ $# -eq 1 ] && header_dir=$1 || header_dir=tools/include/uapi/linux/
+
+printf "static const char *perf_ioctl_cmds[] = {\n"
+regex='^#[[:space:]]*define[[:space:]]+PERF_EVENT_IOC_(\w+)[[:space:]]+_IO[RW]*[[:space:]]*\([[:space:]]*.\$.[[:space:]]*,[[:space:]]*([[:digit:]]+).*'
+grep -E $regex ${header_dir}/perf_event.h	| \
+	sed -r "s/$regex/\2 \1/g"	| \
+	sort | xargs printf "\t[%s] = \"%s\",\n"
+printf "};\n"
diff --git a/tools/perf/trace/beauty/pid.c b/tools/perf/trace/beauty/pid.c
new file mode 100644
index 000000000..cca4a3a5d
--- /dev/null
+++ b/tools/perf/trace/beauty/pid.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: LGPL-2.1
+#include "trace/beauty/beauty.h"
+#include "util/machine.h"
+#include "util/thread.h"
+
+size_t syscall_arg__scnprintf_pid(char *bf, size_t size, struct syscall_arg *arg)
+{
+	int pid = arg->val;
+	struct trace *trace = arg->trace;
+	size_t printed = scnprintf(bf, size, "%d", pid);
+	struct thread *thread = machine__findnew_thread(trace__host(trace), pid, pid);
+
+	if (thread != NULL) {
+		if (!thread__comm_set(thread))
+			thread__set_comm_from_proc(thread);
+
+		if (thread__comm_set(thread))
+			printed += scnprintf(bf + printed, size - printed,
+					     " (%s)", thread__comm_str(thread));
+		thread__put(thread);
+	}
+
+	return printed;
+}
diff --git a/tools/perf/trace/beauty/pkey_alloc.c b/tools/perf/trace/beauty/pkey_alloc.c
new file mode 100644
index 000000000..f9596ed02
--- /dev/null
+++ b/tools/perf/trace/beauty/pkey_alloc.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: LGPL-2.1
+/*
+ * trace/beauty/pkey_alloc.c
+ *
+ *  Copyright (C) 2017, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+ */
+
+#include "trace/beauty/beauty.h"
+#include <linux/kernel.h>
+#include <linux/log2.h>
+
+size_t strarray__scnprintf_flags(struct strarray *sa, char *bf, size_t size, bool show_prefix, unsigned long flags)
+{
+	int i, printed = 0;
+
+	if (flags == 0) {
+		const char *s = sa->entries[0];
+		if (s)
+			return scnprintf(bf, size, "%s%s", show_prefix ? sa->prefix : "", s);
+		return scnprintf(bf, size, "%d", 0);
+	}
+
+	for (i = 1; i < sa->nr_entries; ++i) {
+		unsigned long bit = 1UL << (i - 1);
+
+		if (!(flags & bit))
+			continue;
+
+		if (printed != 0)
+			printed += scnprintf(bf + printed, size - printed, "|");
+
+		if (sa->entries[i] != NULL)
+			printed += scnprintf(bf + printed, size - printed, "%s%s", show_prefix ? sa->prefix : "", sa->entries[i]);
+		else
+			printed += scnprintf(bf + printed, size - printed, "0x%#", bit);
+	}
+
+	return printed;
+}
+
+static size_t pkey_alloc__scnprintf_access_rights(int access_rights, char *bf, size_t size, bool show_prefix)
+{
+#include "trace/beauty/generated/pkey_alloc_access_rights_array.c"
+	static DEFINE_STRARRAY(pkey_alloc_access_rights, "PKEY_");
+
+	return strarray__scnprintf_flags(&strarray__pkey_alloc_access_rights, bf, size, show_prefix, access_rights);
+}
+
+size_t syscall_arg__scnprintf_pkey_alloc_access_rights(char *bf, size_t size, struct syscall_arg *arg)
+{
+	unsigned long cmd = arg->val;
+
+	return pkey_alloc__scnprintf_access_rights(cmd, bf, size, arg->show_string_prefix);
+}
diff --git a/tools/perf/trace/beauty/pkey_alloc_access_rights.sh b/tools/perf/trace/beauty/pkey_alloc_access_rights.sh
new file mode 100755
index 000000000..74da888bc
--- /dev/null
+++ b/tools/perf/trace/beauty/pkey_alloc_access_rights.sh
@@ -0,0 +1,11 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+[ $# -eq 1 ] && header_dir=$1 || header_dir=tools/include/uapi/asm-generic/
+
+printf "static const char *pkey_alloc_access_rights[] = {\n"
+regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+PKEY_([[:alnum:]_]+)[[:space:]]+(0x[[:xdigit:]]+)[[:space:]]*'
+grep -E $regex ${header_dir}/mman-common.h	| \
+	sed -r "s/$regex/\2 \2 \1/g"	| \
+	sort | xargs printf "\t[%s ? (ilog2(%s) + 1) : 0] = \"%s\",\n"
+printf "};\n"
diff --git a/tools/perf/trace/beauty/prctl.c b/tools/perf/trace/beauty/prctl.c
new file mode 100644
index 000000000..7d1aa9fd0
--- /dev/null
+++ b/tools/perf/trace/beauty/prctl.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: LGPL-2.1
+/*
+ * trace/beauty/prctl.c
+ *
+ *  Copyright (C) 2017, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+ */
+
+#include "trace/beauty/beauty.h"
+#include <linux/kernel.h>
+#include <linux/prctl.h>
+
+#include "trace/beauty/generated/prctl_option_array.c"
+
+DEFINE_STRARRAY(prctl_options, "PR_");
+
+static size_t prctl__scnprintf_option(int option, char *bf, size_t size, bool show_prefix)
+{
+	return strarray__scnprintf(&strarray__prctl_options, bf, size, "%d", show_prefix, option);
+}
+
+static size_t prctl__scnprintf_set_mm(int option, char *bf, size_t size, bool show_prefix)
+{
+	static DEFINE_STRARRAY(prctl_set_mm_options, "PR_SET_MM_");
+	return strarray__scnprintf(&strarray__prctl_set_mm_options, bf, size, "%d", show_prefix, option);
+}
+
+size_t syscall_arg__scnprintf_prctl_arg2(char *bf, size_t size, struct syscall_arg *arg)
+{
+	int option = syscall_arg__val(arg, 0);
+
+	if (option == PR_SET_MM)
+		return prctl__scnprintf_set_mm(arg->val, bf, size, arg->show_string_prefix);
+	/*
+	 * We still don't grab the contents of pointers on entry or exit,
+	 * so just print them as hex numbers
+	 */
+	if (option == PR_SET_NAME)
+		return syscall_arg__scnprintf_hex(bf, size, arg);
+
+	return syscall_arg__scnprintf_long(bf, size, arg);
+}
+
+size_t syscall_arg__scnprintf_prctl_arg3(char *bf, size_t size, struct syscall_arg *arg)
+{
+	int option = syscall_arg__val(arg, 0);
+
+	if (option == PR_SET_MM)
+		return syscall_arg__scnprintf_hex(bf, size, arg);
+
+	return syscall_arg__scnprintf_long(bf, size, arg);
+}
+
+size_t syscall_arg__scnprintf_prctl_option(char *bf, size_t size, struct syscall_arg *arg)
+{
+	unsigned long option = arg->val;
+	enum {
+                SPO_ARG2 = (1 << 1),
+                SPO_ARG3 = (1 << 2),
+                SPO_ARG4 = (1 << 3),
+                SPO_ARG5 = (1 << 4),
+                SPO_ARG6 = (1 << 5),
+        };
+	const u8 all_but2 = SPO_ARG3 | SPO_ARG4 | SPO_ARG5 | SPO_ARG6;
+	const u8 all = SPO_ARG2 | all_but2;
+	const u8 masks[] = {
+		[PR_GET_DUMPABLE]	 = all,
+		[PR_SET_DUMPABLE]	 = all_but2,
+		[PR_SET_NAME]		 = all_but2,
+		[PR_GET_CHILD_SUBREAPER] = all_but2,
+		[PR_SET_CHILD_SUBREAPER] = all_but2,
+		[PR_GET_SECUREBITS]	 = all,
+		[PR_SET_SECUREBITS]	 = all_but2,
+		[PR_SET_MM]		 = SPO_ARG4 | SPO_ARG5 | SPO_ARG6,
+		[PR_GET_PDEATHSIG]	 = all,
+		[PR_SET_PDEATHSIG]	 = all_but2,
+	};
+
+	if (option < ARRAY_SIZE(masks))
+		arg->mask |= masks[option];
+
+	return prctl__scnprintf_option(option, bf, size, arg->show_string_prefix);
+}
diff --git a/tools/perf/trace/beauty/prctl_option.sh b/tools/perf/trace/beauty/prctl_option.sh
new file mode 100755
index 000000000..e049f5e9c
--- /dev/null
+++ b/tools/perf/trace/beauty/prctl_option.sh
@@ -0,0 +1,18 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+[ $# -eq 1 ] && beauty_uapi_linux_dir=$1 || beauty_uapi_linux_dir=tools/perf/trace/beauty/include/uapi/linux/
+
+printf "static const char *prctl_options[] = {\n"
+regex='^#define[[:space:]]{1}PR_(\w+)[[:space:]]*([[:xdigit:]]+)([[:space:]]*/.*)?$'
+grep -E $regex ${beauty_uapi_linux_dir}/prctl.h | grep -v PR_SET_PTRACER | \
+	sed -E "s%$regex%\2 \1%g"	| \
+	sort -n | xargs printf "\t[%s] = \"%s\",\n"
+printf "};\n"
+
+printf "static const char *prctl_set_mm_options[] = {\n"
+regex='^#[[:space:]]+define[[:space:]]+PR_SET_MM_(\w+)[[:space:]]*([[:digit:]]+).*'
+grep -E $regex ${beauty_uapi_linux_dir}/prctl.h | \
+	sed -r "s/$regex/\2 \1/g"	| \
+	sort -n | xargs printf "\t[%s] = \"%s\",\n"
+printf "};\n"
diff --git a/tools/perf/trace/beauty/rename_flags.sh b/tools/perf/trace/beauty/rename_flags.sh
new file mode 100755
index 000000000..702411dd7
--- /dev/null
+++ b/tools/perf/trace/beauty/rename_flags.sh
@@ -0,0 +1,15 @@
+#!/bin/sh
+# Copyright (C) 2018, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+# SPDX-License-Identifier: LGPL-2.1
+
+[ $# -eq 1 ] && header_dir=$1 || header_dir=tools/perf/trace/beauty/include/uapi/linux/
+
+fs_header=${header_dir}/fs.h
+
+printf "static const char *rename_flags[] = {\n"
+regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+RENAME_([[:alnum:]_]+)[[:space:]]+\(1[[:space:]]*<<[[:space:]]*([[:xdigit:]]+)[[:space:]]*\)[[:space:]]*.*'
+grep -E -q $regex ${fs_header} && \
+(grep -E $regex ${fs_header} | \
+	sed -r "s/$regex/\2 \1/g"	| \
+	xargs printf "\t[%d + 1] = \"%s\",\n")
+printf "};\n"
diff --git a/tools/perf/trace/beauty/renameat.c b/tools/perf/trace/beauty/renameat.c
new file mode 100644
index 000000000..852d2e271
--- /dev/null
+++ b/tools/perf/trace/beauty/renameat.c
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: LGPL-2.1
+// Copyright (C) 2018, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+
+#include "trace/beauty/beauty.h"
+
+static size_t renameat2__scnprintf_flags(unsigned long flags, char *bf, size_t size, bool show_prefix)
+{
+#include "trace/beauty/generated/rename_flags_array.c"
+       static DEFINE_STRARRAY(rename_flags, "RENAME_");
+
+       return strarray__scnprintf_flags(&strarray__rename_flags, bf, size, show_prefix, flags);
+}
+
+size_t syscall_arg__scnprintf_renameat2_flags(char *bf, size_t size, struct syscall_arg *arg)
+{
+	unsigned long flags = arg->val;
+	return renameat2__scnprintf_flags(flags, bf, size, arg->show_string_prefix);
+}
diff --git a/tools/perf/trace/beauty/sched_policy.c b/tools/perf/trace/beauty/sched_policy.c
new file mode 100644
index 000000000..3fb6d9e0f
--- /dev/null
+++ b/tools/perf/trace/beauty/sched_policy.c
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: LGPL-2.1
+#include "trace/beauty/beauty.h"
+
+#include <sched.h>
+
+/*
+ * Not defined anywhere else, probably, just to make sure we
+ * catch future flags
+ */
+#define SCHED_POLICY_MASK 0xff
+
+#ifndef SCHED_DEADLINE
+#define SCHED_DEADLINE 6
+#endif
+#ifndef SCHED_RESET_ON_FORK
+#define SCHED_RESET_ON_FORK 0x40000000
+#endif
+
+size_t syscall_arg__scnprintf_sched_policy(char *bf, size_t size,
+					   struct syscall_arg *arg)
+{
+	bool show_prefix = arg->show_string_prefix;
+	const char *prefix = "SCHED_";
+	const char *policies[] = {
+		"NORMAL", "FIFO", "RR", "BATCH", "ISO", "IDLE", "DEADLINE",
+	};
+	size_t printed;
+	int policy = arg->val,
+	    flags = policy & ~SCHED_POLICY_MASK;
+
+	policy &= SCHED_POLICY_MASK;
+	if (policy <= SCHED_DEADLINE)
+		printed = scnprintf(bf, size, "%s%s", show_prefix ? prefix : "", policies[policy]);
+	else
+		printed = scnprintf(bf, size, "%#x", policy);
+
+#define	P_POLICY_FLAG(n) \
+	if (flags & SCHED_##n) { \
+		printed += scnprintf(bf + printed, size - printed, "|%s%s", show_prefix ? prefix : "",  #n); \
+		flags &= ~SCHED_##n; \
+	}
+
+	P_POLICY_FLAG(RESET_ON_FORK);
+#undef P_POLICY_FLAG
+
+	if (flags)
+		printed += scnprintf(bf + printed, size - printed, "|%#x", flags);
+
+	return printed;
+}
diff --git a/tools/perf/trace/beauty/seccomp.c b/tools/perf/trace/beauty/seccomp.c
new file mode 100644
index 000000000..f345c66c1
--- /dev/null
+++ b/tools/perf/trace/beauty/seccomp.c
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: LGPL-2.1
+#include "trace/beauty/beauty.h"
+
+#ifndef SECCOMP_SET_MODE_STRICT
+#define SECCOMP_SET_MODE_STRICT 0
+#endif
+#ifndef SECCOMP_SET_MODE_FILTER
+#define SECCOMP_SET_MODE_FILTER 1
+#endif
+
+size_t syscall_arg__scnprintf_seccomp_op(char *bf, size_t size, struct syscall_arg *arg)
+{
+	bool show_prefix = arg->show_string_prefix;
+	const char *prefix = "SECCOMP_SET_MODE_";
+	int op = arg->val;
+	size_t printed = 0;
+
+	switch (op) {
+#define	P_SECCOMP_SET_MODE_OP(n) case SECCOMP_SET_MODE_##n: printed = scnprintf(bf, size, "%s%s", show_prefix ? prefix : "", #n); break
+	P_SECCOMP_SET_MODE_OP(STRICT);
+	P_SECCOMP_SET_MODE_OP(FILTER);
+#undef P_SECCOMP_SET_MODE_OP
+	default: printed = scnprintf(bf, size, "%#x", op);			  break;
+	}
+
+	return printed;
+}
+
+
+
+#ifndef SECCOMP_FILTER_FLAG_TSYNC
+#define SECCOMP_FILTER_FLAG_TSYNC 1
+#endif
+
+size_t syscall_arg__scnprintf_seccomp_flags(char *bf, size_t size,
+					    struct syscall_arg *arg)
+{
+	bool show_prefix = arg->show_string_prefix;
+	const char *prefix = "SECCOMP_FILTER_FLAG_";
+	int printed = 0, flags = arg->val;
+
+#define	P_FLAG(n) \
+	if (flags & SECCOMP_FILTER_FLAG_##n) { \
+		printed += scnprintf(bf + printed, size - printed, "%s%s%s", printed ? "|" : "", show_prefix ? prefix : "", #n); \
+		flags &= ~SECCOMP_FILTER_FLAG_##n; \
+	}
+
+	P_FLAG(TSYNC);
+#undef P_FLAG
+
+	if (flags)
+		printed += scnprintf(bf + printed, size - printed, "%s%#x", printed ? "|" : "", flags);
+
+	return printed;
+}
diff --git a/tools/perf/trace/beauty/signum.c b/tools/perf/trace/beauty/signum.c
new file mode 100644
index 000000000..6817e9feb
--- /dev/null
+++ b/tools/perf/trace/beauty/signum.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: LGPL-2.1
+#include "trace/beauty/beauty.h"
+
+#include <signal.h>
+
+size_t syscall_arg__scnprintf_signum(char *bf, size_t size, struct syscall_arg *arg)
+{
+	bool show_prefix = arg->show_string_prefix;
+	const char *prefix = "SIG";
+	int sig = arg->val;
+
+	switch (sig) {
+#define	P_SIGNUM(n) case SIG##n: return scnprintf(bf, size, "%s%s", show_prefix ? prefix : "", #n)
+	P_SIGNUM(HUP);
+	P_SIGNUM(INT);
+	P_SIGNUM(QUIT);
+	P_SIGNUM(ILL);
+	P_SIGNUM(TRAP);
+	P_SIGNUM(ABRT);
+	P_SIGNUM(BUS);
+	P_SIGNUM(FPE);
+	P_SIGNUM(KILL);
+	P_SIGNUM(USR1);
+	P_SIGNUM(SEGV);
+	P_SIGNUM(USR2);
+	P_SIGNUM(PIPE);
+	P_SIGNUM(ALRM);
+	P_SIGNUM(TERM);
+	P_SIGNUM(CHLD);
+	P_SIGNUM(CONT);
+	P_SIGNUM(STOP);
+	P_SIGNUM(TSTP);
+	P_SIGNUM(TTIN);
+	P_SIGNUM(TTOU);
+	P_SIGNUM(URG);
+	P_SIGNUM(XCPU);
+	P_SIGNUM(XFSZ);
+	P_SIGNUM(VTALRM);
+	P_SIGNUM(PROF);
+	P_SIGNUM(WINCH);
+	P_SIGNUM(IO);
+	P_SIGNUM(PWR);
+	P_SIGNUM(SYS);
+#ifdef SIGEMT
+	P_SIGNUM(EMT);
+#endif
+#ifdef SIGSTKFLT
+	P_SIGNUM(STKFLT);
+#endif
+#ifdef SIGSWI
+	P_SIGNUM(SWI);
+#endif
+	default: break;
+	}
+
+	return scnprintf(bf, size, "%#x", sig);
+}
diff --git a/tools/perf/trace/beauty/sndrv_ctl_ioctl.sh b/tools/perf/trace/beauty/sndrv_ctl_ioctl.sh
new file mode 100755
index 000000000..572939a12
--- /dev/null
+++ b/tools/perf/trace/beauty/sndrv_ctl_ioctl.sh
@@ -0,0 +1,9 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+[ $# -eq 1 ] && beauty_uapi_sound_dir=$1 || beauty_uapi_sound_dir=tools/perf/trace/beauty/include/uapi/sound/
+
+printf "static const char *sndrv_ctl_ioctl_cmds[] = {\n"
+grep "^#define[\t ]\+SNDRV_CTL_IOCTL_" $beauty_uapi_sound_dir/asound.h | \
+	sed -r 's/^#define +SNDRV_CTL_IOCTL_([A-Z0-9_]+)[\t ]+_IO[RW]*\( *.U., *(0x[[:xdigit:]]+),?.*/\t[\2] = \"\1\",/g'
+printf "};\n"
diff --git a/tools/perf/trace/beauty/sndrv_pcm_ioctl.sh b/tools/perf/trace/beauty/sndrv_pcm_ioctl.sh
new file mode 100755
index 000000000..33afae9a1
--- /dev/null
+++ b/tools/perf/trace/beauty/sndrv_pcm_ioctl.sh
@@ -0,0 +1,9 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+[ $# -eq 1 ] && beauty_uapi_sound_dir=$1 || beauty_uapi_sound_dir=tools/perf/trace/beauty/include/uapi/sound/
+
+printf "static const char *sndrv_pcm_ioctl_cmds[] = {\n"
+grep "^#define[\t ]\+SNDRV_PCM_IOCTL_" $beauty_uapi_sound_dir/asound.h | \
+	sed -r 's/^#define +SNDRV_PCM_IOCTL_([A-Z0-9_]+)[\t ]+_IO[RW]*\( *.A., *(0x[[:xdigit:]]+),?.*/\t[\2] = \"\1\",/g'
+printf "};\n"
diff --git a/tools/perf/trace/beauty/sockaddr.c b/tools/perf/trace/beauty/sockaddr.c
new file mode 100644
index 000000000..a17a27ac2
--- /dev/null
+++ b/tools/perf/trace/beauty/sockaddr.c
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: LGPL-2.1
+// Copyright (C) 2018, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+
+#include "trace/beauty/beauty.h"
+#include <sys/socket.h>
+#include <sys/types.h>
+#include <sys/un.h>
+#include <arpa/inet.h>
+
+#include "trace/beauty/generated/sockaddr.c"
+DEFINE_STRARRAY(socket_families, "PF_");
+
+static size_t af_inet__scnprintf(struct sockaddr *sa, char *bf, size_t size)
+{
+	struct sockaddr_in *sin = (struct sockaddr_in *)sa;
+	char tmp[16];
+	return scnprintf(bf, size, ", port: %d, addr: %s", ntohs(sin->sin_port),
+			 inet_ntop(sin->sin_family, &sin->sin_addr, tmp, sizeof(tmp)));
+}
+
+static size_t af_inet6__scnprintf(struct sockaddr *sa, char *bf, size_t size)
+{
+	struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)sa;
+	u32 flowinfo = ntohl(sin6->sin6_flowinfo);
+	char tmp[512];
+	size_t printed = scnprintf(bf, size, ", port: %d, addr: %s", ntohs(sin6->sin6_port),
+				   inet_ntop(sin6->sin6_family, &sin6->sin6_addr, tmp, sizeof(tmp)));
+	if (flowinfo != 0)
+		printed += scnprintf(bf + printed, size - printed, ", flowinfo: %lu", flowinfo);
+	if (sin6->sin6_scope_id != 0)
+		printed += scnprintf(bf + printed, size - printed, ", scope_id: %lu", sin6->sin6_scope_id);
+
+	return printed;
+}
+
+static size_t af_local__scnprintf(struct sockaddr *sa, char *bf, size_t size)
+{
+	struct sockaddr_un *sun = (struct sockaddr_un *)sa;
+	return scnprintf(bf, size, ", path: %s", sun->sun_path);
+}
+
+static size_t (*af_scnprintfs[])(struct sockaddr *sa, char *bf, size_t size) = {
+	[AF_LOCAL] = af_local__scnprintf,
+	[AF_INET]  = af_inet__scnprintf,
+	[AF_INET6] = af_inet6__scnprintf,
+};
+
+static size_t syscall_arg__scnprintf_augmented_sockaddr(struct syscall_arg *arg, char *bf, size_t size)
+{
+	struct sockaddr *sa = (struct sockaddr *)&arg->augmented.args->value;
+	char family[32];
+	size_t printed;
+
+	strarray__scnprintf(&strarray__socket_families, family, sizeof(family), "%d", arg->show_string_prefix, sa->sa_family);
+	printed = scnprintf(bf, size, "{ .family: %s", family);
+
+	if (sa->sa_family < ARRAY_SIZE(af_scnprintfs) && af_scnprintfs[sa->sa_family])
+		printed += af_scnprintfs[sa->sa_family](sa, bf + printed, size - printed);
+
+	return printed + scnprintf(bf + printed, size - printed, " }");
+}
+
+size_t syscall_arg__scnprintf_sockaddr(char *bf, size_t size, struct syscall_arg *arg)
+{
+	if (arg->augmented.args)
+		return syscall_arg__scnprintf_augmented_sockaddr(arg, bf, size);
+
+	return scnprintf(bf, size, "%#lx", arg->val);
+}
diff --git a/tools/perf/trace/beauty/sockaddr.sh b/tools/perf/trace/beauty/sockaddr.sh
new file mode 100755
index 000000000..a59827ea1
--- /dev/null
+++ b/tools/perf/trace/beauty/sockaddr.sh
@@ -0,0 +1,24 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+# This one uses a copy from the kernel sources headers that is in a
+# place used just for these tools/perf/beauty/ usage, we shouldn't not
+# put it in tools/include/linux otherwise they would be used in the
+# normal compiler building process and would drag needless stuff from the
+# kernel.
+
+# When what these scripts need is already in tools/include/ then use it,
+# otherwise grab and check the copy from the kernel sources just for these
+# string table building scripts.
+
+[ $# -eq 1 ] && header_dir=$1 || header_dir=tools/perf/trace/beauty/include/linux/
+
+printf "static const char *socket_families[] = {\n"
+# #define AF_LOCAL	1	/* POSIX name for AF_UNIX	*/
+regex='^#define[[:space:]]+AF_(\w+)[[:space:]]+([[:digit:]]+).*'
+
+grep -E $regex ${header_dir}/socket.h | \
+	sed -r "s/$regex/\2 \1/g"	| \
+	xargs printf "\t[%s] = \"%s\",\n" | \
+	grep -E -v "\"(UNIX|MAX)\""
+printf "};\n"
diff --git a/tools/perf/trace/beauty/socket.c b/tools/perf/trace/beauty/socket.c
new file mode 100644
index 000000000..b0870c7b4
--- /dev/null
+++ b/tools/perf/trace/beauty/socket.c
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: LGPL-2.1
+/*
+ * trace/beauty/socket.c
+ *
+ *  Copyright (C) 2018, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+ */
+
+#include "trace/beauty/beauty.h"
+#include <sys/types.h>
+#include <sys/socket.h>
+
+#include "trace/beauty/generated/socket.c"
+
+static size_t socket__scnprintf_ipproto(int protocol, char *bf, size_t size, bool show_prefix)
+{
+	static DEFINE_STRARRAY(socket_ipproto, "IPPROTO_");
+
+	return strarray__scnprintf(&strarray__socket_ipproto, bf, size, "%d", show_prefix, protocol);
+}
+
+size_t syscall_arg__scnprintf_socket_protocol(char *bf, size_t size, struct syscall_arg *arg)
+{
+	int domain = syscall_arg__val(arg, 0);
+
+	if (domain == AF_INET || domain == AF_INET6)
+		return socket__scnprintf_ipproto(arg->val, bf, size, arg->show_string_prefix);
+
+	return syscall_arg__scnprintf_int(bf, size, arg);
+}
+
+static size_t socket__scnprintf_level(int level, char *bf, size_t size, bool show_prefix)
+{
+#if defined(__alpha__) || defined(__hppa__) || defined(__mips__) || defined(__sparc__)
+	const int sol_socket = 0xffff;
+#else
+	const int sol_socket = 1;
+#endif
+	if (level == sol_socket)
+		return scnprintf(bf, size, "%sSOCKET", show_prefix ? "SOL_" : "");
+
+	return strarray__scnprintf(&strarray__socket_level, bf, size, "%d", show_prefix, level);
+}
+
+size_t syscall_arg__scnprintf_socket_level(char *bf, size_t size, struct syscall_arg *arg)
+{
+	return socket__scnprintf_level(arg->val, bf, size, arg->show_string_prefix);
+}
diff --git a/tools/perf/trace/beauty/socket.sh b/tools/perf/trace/beauty/socket.sh
new file mode 100755
index 000000000..670c6db29
--- /dev/null
+++ b/tools/perf/trace/beauty/socket.sh
@@ -0,0 +1,28 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+if [ $# -gt 0 ] ; then
+	uapi_header_dir=$1
+	beauty_header_dir=$2
+else
+	uapi_header_dir=tools/include/uapi/linux/
+	beauty_header_dir=tools/perf/trace/beauty/include/linux/
+fi
+
+printf "static const char *socket_ipproto[] = {\n"
+ipproto_regex='^[[:space:]]+IPPROTO_(\w+)[[:space:]]+=[[:space:]]+([[:digit:]]+),.*'
+
+grep -E $ipproto_regex ${uapi_header_dir}/in.h | \
+	sed -r "s/$ipproto_regex/\2 \1/g"	| \
+	sort -n | xargs printf "\t[%s] = \"%s\",\n"
+printf "};\n\n"
+
+printf "static const char *socket_level[] = {\n"
+socket_level_regex='^#define[[:space:]]+SOL_(\w+)[[:space:]]+([[:digit:]]+)([[:space:]]+/.*)?'
+
+grep -E $socket_level_regex ${beauty_header_dir}/socket.h | \
+	sed -E "s%$socket_level_regex%\2 \1%g"	| \
+	sort -n | xargs printf "\t[%s] = \"%s\",\n"
+printf "};\n\n"
+
+printf 'DEFINE_STRARRAY(socket_level, "SOL_");\n'
diff --git a/tools/perf/trace/beauty/socket_type.c b/tools/perf/trace/beauty/socket_type.c
new file mode 100644
index 000000000..059e3041d
--- /dev/null
+++ b/tools/perf/trace/beauty/socket_type.c
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: LGPL-2.1
+#include "trace/beauty/beauty.h"
+
+#include <sys/types.h>
+#include <sys/socket.h>
+
+#ifndef SOCK_DCCP
+# define SOCK_DCCP		6
+#endif
+
+#ifndef SOCK_CLOEXEC
+# define SOCK_CLOEXEC		02000000
+#endif
+
+#ifndef SOCK_NONBLOCK
+# define SOCK_NONBLOCK		00004000
+#endif
+
+#ifndef SOCK_TYPE_MASK
+#define SOCK_TYPE_MASK 0xf
+#endif
+
+size_t syscall_arg__scnprintf_socket_type(char *bf, size_t size, struct syscall_arg *arg)
+{
+	bool show_prefix = arg->show_string_prefix;
+	const char *prefix = "SOCK_";
+	size_t printed;
+	int type = arg->val,
+	    flags = type & ~SOCK_TYPE_MASK;
+
+	type &= SOCK_TYPE_MASK;
+	/*
+	 * Can't use a strarray, MIPS may override for ABI reasons.
+	 */
+	switch (type) {
+#define	P_SK_TYPE(n) case SOCK_##n: printed = scnprintf(bf, size, "%s%s", show_prefix ? prefix : "", #n); break;
+	P_SK_TYPE(STREAM);
+	P_SK_TYPE(DGRAM);
+	P_SK_TYPE(RAW);
+	P_SK_TYPE(RDM);
+	P_SK_TYPE(SEQPACKET);
+	P_SK_TYPE(DCCP);
+	P_SK_TYPE(PACKET);
+#undef P_SK_TYPE
+	default:
+		printed = scnprintf(bf, size, "%#x", type);
+	}
+
+#define	P_SK_FLAG(n) \
+	if (flags & SOCK_##n) { \
+		printed += scnprintf(bf + printed, size - printed, "|%s", #n); \
+		flags &= ~SOCK_##n; \
+	}
+
+	P_SK_FLAG(CLOEXEC);
+	P_SK_FLAG(NONBLOCK);
+#undef P_SK_FLAG
+
+	if (flags)
+		printed += scnprintf(bf + printed, size - printed, "|%#x", flags);
+
+	return printed;
+}
diff --git a/tools/perf/trace/beauty/statx.c b/tools/perf/trace/beauty/statx.c
new file mode 100644
index 000000000..24843e614
--- /dev/null
+++ b/tools/perf/trace/beauty/statx.c
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: LGPL-2.1
+/*
+ * trace/beauty/statx.c
+ *
+ *  Copyright (C) 2017, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+ */
+
+#include "trace/beauty/beauty.h"
+#include <sys/types.h>
+#include <linux/log2.h>
+
+static size_t statx__scnprintf_mask(unsigned long mask, char *bf, size_t size, bool show_prefix)
+{
+	#include "trace/beauty/generated/statx_mask_array.c"
+	static DEFINE_STRARRAY(statx_mask, "STATX_");
+	return strarray__scnprintf_flags(&strarray__statx_mask, bf, size, show_prefix, mask);
+}
+
+size_t syscall_arg__scnprintf_statx_mask(char *bf, size_t size, struct syscall_arg *arg)
+{
+	bool show_prefix = arg->show_string_prefix;
+	int mask = arg->val;
+
+	return statx__scnprintf_mask(mask, bf, size, show_prefix);
+}
diff --git a/tools/perf/trace/beauty/statx_mask.sh b/tools/perf/trace/beauty/statx_mask.sh
new file mode 100755
index 000000000..18c802ed0
--- /dev/null
+++ b/tools/perf/trace/beauty/statx_mask.sh
@@ -0,0 +1,23 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+if [ $# -ne 1 ] ; then
+	beauty_uapi_linux_dir=tools/perf/trace/beauty/include/uapi/linux/
+else
+	beauty_uapi_linux_dir=$1
+fi
+
+linux_stat=${beauty_uapi_linux_dir}/stat.h
+
+printf "static const char *statx_mask[] = {\n"
+regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+STATX_([^_]+[[:alnum:]_]+)[[:space:]]+(0x[[:xdigit:]]+)[[:space:]]*.*'
+# STATX_BASIC_STATS its a bitmask formed by the mask in the normal stat struct
+# STATX_ALL is another bitmask and deprecated
+# STATX_ATTR_*: Attributes to be found in stx_attributes and masked in stx_attributes_mask
+grep -E $regex ${linux_stat} | \
+	grep -v STATX_ALL | \
+	grep -v STATX_BASIC_STATS | \
+	grep -v '\<STATX_ATTR_' | \
+	sed -r "s/$regex/\2 \1/g"	| \
+	xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n"
+printf "};\n"
diff --git a/tools/perf/trace/beauty/sync_file_range.c b/tools/perf/trace/beauty/sync_file_range.c
new file mode 100644
index 000000000..3e8f50ff4
--- /dev/null
+++ b/tools/perf/trace/beauty/sync_file_range.c
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: LGPL-2.1
+/*
+ * trace/beauty/sync_file_range.c
+ *
+ *  Copyright (C) 2019, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+ */
+
+#include "trace/beauty/beauty.h"
+#include <linux/log2.h>
+#include <linux/fs.h>
+
+#ifndef SYNC_FILE_RANGE_WRITE_AND_WAIT
+#define SYNC_FILE_RANGE_WAIT_BEFORE     1
+#define SYNC_FILE_RANGE_WRITE           2
+#define SYNC_FILE_RANGE_WAIT_AFTER      4
+#define SYNC_FILE_RANGE_WRITE_AND_WAIT  (SYNC_FILE_RANGE_WRITE | \
+                                         SYNC_FILE_RANGE_WAIT_BEFORE | \
+                                         SYNC_FILE_RANGE_WAIT_AFTER)
+#endif
+
+static size_t sync_file_range__scnprintf_flags(unsigned long flags, char *bf, size_t size, bool show_prefix)
+{
+#include "trace/beauty/generated/sync_file_range_arrays.c"
+       static DEFINE_STRARRAY(sync_file_range_flags, "SYNC_FILE_RANGE_");
+       size_t printed = 0;
+
+       if ((flags & SYNC_FILE_RANGE_WRITE_AND_WAIT) == SYNC_FILE_RANGE_WRITE_AND_WAIT) {
+               printed += scnprintf(bf + printed, size - printed, "%s%s", show_prefix ? "SYNC_FILE_RANGE_" : "", "WRITE_AND_WAIT");
+	       flags &= ~SYNC_FILE_RANGE_WRITE_AND_WAIT;
+       }
+
+       return printed + strarray__scnprintf_flags(&strarray__sync_file_range_flags, bf + printed, size - printed, show_prefix, flags);
+}
+
+size_t syscall_arg__scnprintf_sync_file_range_flags(char *bf, size_t size, struct syscall_arg *arg)
+{
+	unsigned long flags = arg->val;
+
+	return sync_file_range__scnprintf_flags(flags, bf, size, arg->show_string_prefix);
+}
diff --git a/tools/perf/trace/beauty/sync_file_range.sh b/tools/perf/trace/beauty/sync_file_range.sh
new file mode 100755
index 000000000..b1084c4ca
--- /dev/null
+++ b/tools/perf/trace/beauty/sync_file_range.sh
@@ -0,0 +1,17 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+if [ $# -ne 1 ] ; then
+	linux_header_dir=tools/perf/trace/beauty/include/uapi/linux/
+else
+	linux_header_dir=$1
+fi
+
+linux_fs=${linux_header_dir}/fs.h
+
+printf "static const char *sync_file_range_flags[] = {\n"
+regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+SYNC_FILE_RANGE_([[:alnum:]_]+)[[:space:]]+([[:xdigit:]]+)[[:space:]]*.*'
+grep -E $regex ${linux_fs} | \
+	sed -r "s/$regex/\2 \1/g"	| \
+	xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n"
+printf "};\n"
diff --git a/tools/perf/trace/beauty/syscalltbl.c b/tools/perf/trace/beauty/syscalltbl.c
new file mode 100644
index 000000000..67a8ec10e
--- /dev/null
+++ b/tools/perf/trace/beauty/syscalltbl.c
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * System call table mapper
+ *
+ * (C) 2016 Arnaldo Carvalho de Melo <acme@redhat.com>
+ */
+
+#include "syscalltbl.h"
+#include <stdlib.h>
+#include <asm/bitsperlong.h>
+#include <linux/compiler.h>
+#include <linux/kernel.h>
+#include <linux/zalloc.h>
+
+#include <string.h>
+#include "string2.h"
+
+#include "trace/beauty/generated/syscalltbl.c"
+
+static const struct syscalltbl *find_table(int e_machine)
+{
+	static const struct syscalltbl *last_table;
+	static int last_table_machine = EM_NONE;
+
+	/* Tables only exist for EM_SPARC. */
+	if (e_machine == EM_SPARCV9)
+		e_machine = EM_SPARC;
+
+	if (last_table_machine == e_machine && last_table != NULL)
+		return last_table;
+
+	for (size_t i = 0; i < ARRAY_SIZE(syscalltbls); i++) {
+		const struct syscalltbl *entry = &syscalltbls[i];
+
+		if (entry->e_machine != e_machine && entry->e_machine != EM_NONE)
+			continue;
+
+		last_table = entry;
+		last_table_machine = e_machine;
+		return entry;
+	}
+	return NULL;
+}
+
+const char *syscalltbl__name(int e_machine, int id)
+{
+	const struct syscalltbl *table = find_table(e_machine);
+
+	if (e_machine == EM_MIPS && id > 1000) {
+		/*
+		 * MIPS may encode the N32/64/O32 type in the high part of
+		 * syscall number. Mask this off if present. See the values of
+		 * __NR_N32_Linux, __NR_64_Linux, __NR_O32_Linux and __NR_Linux.
+		 */
+		id = id % 1000;
+	}
+	if (table && id >= 0 && id < table->num_to_name_len)
+		return table->num_to_name[id];
+	return NULL;
+}
+
+struct syscall_cmp_key {
+	const char *name;
+	const char *const *tbl;
+};
+
+static int syscallcmpname(const void *vkey, const void *ventry)
+{
+	const struct syscall_cmp_key *key = vkey;
+	const uint16_t *entry = ventry;
+
+	return strcmp(key->name, key->tbl[*entry]);
+}
+
+int syscalltbl__id(int e_machine, const char *name)
+{
+	const struct syscalltbl *table = find_table(e_machine);
+	struct syscall_cmp_key key;
+	const uint16_t *id;
+
+	if (!table)
+		return -1;
+
+	key.name = name;
+	key.tbl = table->num_to_name;
+	id = bsearch(&key, table->sorted_names, table->sorted_names_len,
+		     sizeof(table->sorted_names[0]), syscallcmpname);
+
+	return id ? *id : -1;
+}
+
+int syscalltbl__num_idx(int e_machine)
+{
+	const struct syscalltbl *table = find_table(e_machine);
+
+	if (!table)
+		return 0;
+
+	return table->sorted_names_len;
+}
+
+int syscalltbl__id_at_idx(int e_machine, int idx)
+{
+	const struct syscalltbl *table = find_table(e_machine);
+
+	if (!table)
+		return -1;
+
+	assert(idx >= 0 && idx < table->sorted_names_len);
+	return table->sorted_names[idx];
+}
+
+int syscalltbl__strglobmatch_next(int e_machine, const char *syscall_glob, int *idx)
+{
+	const struct syscalltbl *table = find_table(e_machine);
+
+	for (int i = *idx + 1; table && i < table->sorted_names_len; ++i) {
+		const char *name = table->num_to_name[table->sorted_names[i]];
+
+		if (strglobmatch(name, syscall_glob)) {
+			*idx = i;
+			return table->sorted_names[i];
+		}
+	}
+
+	return -1;
+}
+
+int syscalltbl__strglobmatch_first(int e_machine, const char *syscall_glob, int *idx)
+{
+	*idx = -1;
+	return syscalltbl__strglobmatch_next(e_machine, syscall_glob, idx);
+}
diff --git a/tools/perf/trace/beauty/syscalltbl.h b/tools/perf/trace/beauty/syscalltbl.h
new file mode 100644
index 000000000..2bb628eff
--- /dev/null
+++ b/tools/perf/trace/beauty/syscalltbl.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __PERF_SYSCALLTBL_H
+#define __PERF_SYSCALLTBL_H
+
+const char *syscalltbl__name(int e_machine, int id);
+int syscalltbl__id(int e_machine, const char *name);
+int syscalltbl__num_idx(int e_machine);
+int syscalltbl__id_at_idx(int e_machine, int idx);
+
+int syscalltbl__strglobmatch_first(int e_machine, const char *syscall_glob, int *idx);
+int syscalltbl__strglobmatch_next(int e_machine, const char *syscall_glob, int *idx);
+
+#endif /* __PERF_SYSCALLTBL_H */
diff --git a/tools/perf/trace/beauty/syscalltbl.sh b/tools/perf/trace/beauty/syscalltbl.sh
new file mode 100755
index 000000000..1199618dc
--- /dev/null
+++ b/tools/perf/trace/beauty/syscalltbl.sh
@@ -0,0 +1,274 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+#
+# Generate all syscall tables.
+#
+# Each line of the syscall table should have the following format:
+#
+# NR ABI NAME [NATIVE] [COMPAT [noreturn]]
+#
+# NR       syscall number
+# ABI      ABI name
+# NAME     syscall name
+# NATIVE   native entry point (optional)
+# COMPAT   compat entry point (optional)
+# noreturn system call doesn't return (optional)
+set -e
+
+usage() {
+       cat >&2 <<EOF
+usage: $0 <TOOLS DIRECTORY> <OUTFILE>
+
+  <TOOLS DIRECTORY>    path to kernel tools directory
+  <OUTFILE>            output header file
+EOF
+       exit 1
+}
+
+if [ $# -ne 2 ]; then
+       usage
+fi
+tools_dir=$1
+outfile=$2
+
+build_tables() {
+	infile="$1"
+	outfile="$2"
+	abis=$(echo "($3)" | tr ',' '|')
+	e_machine="$4"
+
+	if [ ! -f "$infile" ]
+	then
+		echo "Missing file $infile"
+		exit 1
+	fi
+	sorted_table=$(mktemp /tmp/syscalltbl.XXXXXX)
+	grep -E "^[0-9]+[[:space:]]+$abis" "$infile" | sort -n > "$sorted_table"
+
+	echo "static const char *const syscall_num_to_name_${e_machine}[] = {" >> "$outfile"
+	# the params are: nr abi name entry compat
+	# use _ for intentionally unused variables according to SC2034
+	while read -r nr _ name _ _; do
+		echo "	[$nr] = \"$name\"," >> "$outfile"
+	done < "$sorted_table"
+	echo "};" >> "$outfile"
+
+	echo "static const uint16_t syscall_sorted_names_${e_machine}[] = {" >> "$outfile"
+
+	# When sorting by name, add a suffix of 0s upto 20 characters so that
+	# system calls that differ with a numerical suffix don't sort before
+	# those without. This default behavior of sort differs from that of
+	# strcmp used at runtime. Use sed to strip the trailing 0s suffix
+	# afterwards.
+	grep -E "^[0-9]+[[:space:]]+$abis" "$infile" | awk '{printf $3; for (i = length($3); i < 20; i++) { printf "0"; }; print " " $1}'| sort | sed 's/\([a-zA-Z1-9]\+\)0\+ \([0-9]\+\)/\1 \2/' > "$sorted_table"
+	while read -r name nr; do
+		echo "	$nr,	/* $name */" >> "$outfile"
+	done < "$sorted_table"
+	echo "};" >> "$outfile"
+
+	rm -f "$sorted_table"
+}
+
+rm -f "$outfile"
+cat >> "$outfile" <<EOF
+#include <elf.h>
+#include <stdint.h>
+#include <asm/bitsperlong.h>
+#include <linux/kernel.h>
+
+struct syscalltbl {
+       const char *const *num_to_name;
+       const uint16_t *sorted_names;
+       uint16_t e_machine;
+       uint16_t num_to_name_len;
+       uint16_t sorted_names_len;
+};
+
+#if defined(ALL_SYSCALLTBL) || defined(__alpha__)
+EOF
+build_tables "$tools_dir/perf/arch/alpha/entry/syscalls/syscall.tbl" "$outfile" common,64 EM_ALPHA
+cat >> "$outfile" <<EOF
+#endif // defined(ALL_SYSCALLTBL) || defined(__alpha__)
+
+#if defined(ALL_SYSCALLTBL) || defined(__arm__) || defined(__aarch64__)
+EOF
+build_tables "$tools_dir/perf/arch/arm/entry/syscalls/syscall.tbl" "$outfile" common,32,oabi EM_ARM
+build_tables "$tools_dir/perf/arch/arm64/entry/syscalls/syscall_64.tbl" "$outfile" common,64,renameat,rlimit,memfd_secret EM_AARCH64
+cat >> "$outfile" <<EOF
+#endif // defined(ALL_SYSCALLTBL) || defined(__arm__) || defined(__aarch64__)
+
+#if defined(ALL_SYSCALLTBL) || defined(__csky__)
+EOF
+build_tables "$tools_dir/scripts/syscall.tbl" "$outfile" common,32,csky,time32,stat64,rlimit EM_CSKY
+cat >> "$outfile" <<EOF
+#endif // defined(ALL_SYSCALLTBL) || defined(__csky__)
+
+#if defined(ALL_SYSCALLTBL) || defined(__mips__)
+EOF
+build_tables "$tools_dir/perf/arch/mips/entry/syscalls/syscall_n64.tbl" "$outfile" common,64,n64 EM_MIPS
+cat >> "$outfile" <<EOF
+#endif // defined(ALL_SYSCALLTBL) || defined(__mips__)
+
+#if defined(ALL_SYSCALLTBL) || defined(__hppa__)
+#if __BITS_PER_LONG != 64
+EOF
+build_tables "$tools_dir/perf/arch/parisc/entry/syscalls/syscall.tbl" "$outfile" common,32 EM_PARISC
+echo "#else" >> "$outfile"
+build_tables "$tools_dir/perf/arch/parisc/entry/syscalls/syscall.tbl" "$outfile" common,64 EM_PARISC
+cat >> "$outfile" <<EOF
+#endif //__BITS_PER_LONG != 64
+#endif // defined(ALL_SYSCALLTBL) || defined(__hppa__)
+
+#if defined(ALL_SYSCALLTBL) || defined(__powerpc__) || defined(__powerpc64__)
+EOF
+build_tables "$tools_dir/perf/arch/powerpc/entry/syscalls/syscall.tbl" "$outfile" common,32,nospu EM_PPC
+build_tables "$tools_dir/perf/arch/powerpc/entry/syscalls/syscall.tbl" "$outfile" common,64,nospu EM_PPC64
+cat >> "$outfile" <<EOF
+#endif // defined(ALL_SYSCALLTBL) || defined(__powerpc__) || defined(__powerpc64__)
+
+#if defined(ALL_SYSCALLTBL) || defined(__riscv)
+#if __BITS_PER_LONG != 64
+EOF
+build_tables "$tools_dir/scripts/syscall.tbl" "$outfile" common,32,riscv,memfd_secret EM_RISCV
+echo "#else" >> "$outfile"
+build_tables "$tools_dir/scripts/syscall.tbl" "$outfile" common,64,riscv,rlimit,memfd_secret EM_RISCV
+cat >> "$outfile" <<EOF
+#endif //__BITS_PER_LONG != 64
+#endif // defined(ALL_SYSCALLTBL) || defined(__riscv)
+#if defined(ALL_SYSCALLTBL) || defined(__s390x__)
+EOF
+build_tables "$tools_dir/perf/arch/s390/entry/syscalls/syscall.tbl" "$outfile" common,64,renameat,rlimit,memfd_secret EM_S390
+cat >> "$outfile" <<EOF
+#endif // defined(ALL_SYSCALLTBL) || defined(__s390x__)
+
+#if defined(ALL_SYSCALLTBL) || defined(__sh__)
+EOF
+build_tables "$tools_dir/perf/arch/sh/entry/syscalls/syscall.tbl" "$outfile" common,32 EM_SH
+cat >> "$outfile" <<EOF
+#endif // defined(ALL_SYSCALLTBL) || defined(__sh__)
+
+#if defined(ALL_SYSCALLTBL) || defined(__sparc64__) || defined(__sparc__)
+#if __BITS_PER_LONG != 64
+EOF
+build_tables "$tools_dir/perf/arch/sparc/entry/syscalls/syscall.tbl" "$outfile" common,32 EM_SPARC
+echo "#else" >> "$outfile"
+build_tables "$tools_dir/perf/arch/sparc/entry/syscalls/syscall.tbl" "$outfile" common,64 EM_SPARC
+cat >> "$outfile" <<EOF
+#endif //__BITS_PER_LONG != 64
+#endif // defined(ALL_SYSCALLTBL) || defined(__sparc64__) || defined(__sparc__)
+
+#if defined(ALL_SYSCALLTBL) || defined(__i386__) || defined(__x86_64__)
+EOF
+build_tables "$tools_dir/perf/arch/x86/entry/syscalls/syscall_32.tbl" "$outfile" common,32,i386 EM_386
+build_tables "$tools_dir/perf/arch/x86/entry/syscalls/syscall_64.tbl" "$outfile" common,64 EM_X86_64
+cat >> "$outfile" <<EOF
+#endif // defined(ALL_SYSCALLTBL) || defined(__i386__) || defined(__x86_64__)
+
+#if defined(ALL_SYSCALLTBL) || defined(__xtensa__)
+EOF
+build_tables "$tools_dir/perf/arch/xtensa/entry/syscalls/syscall.tbl" "$outfile" common,32 EM_XTENSA
+cat >> "$outfile" <<EOF
+#endif // defined(ALL_SYSCALLTBL) || defined(__xtensa__)
+
+#if __BITS_PER_LONG != 64
+EOF
+build_tables "$tools_dir/scripts/syscall.tbl" "$outfile" common,32 EM_NONE
+echo "#else" >> "$outfile"
+build_tables "$tools_dir/scripts/syscall.tbl" "$outfile" common,64 EM_NONE
+echo "#endif //__BITS_PER_LONG != 64" >> "$outfile"
+
+build_outer_table() {
+       e_machine=$1
+       outfile="$2"
+       cat >> "$outfile" <<EOF
+       {
+	      .num_to_name = syscall_num_to_name_$e_machine,
+	      .sorted_names = syscall_sorted_names_$e_machine,
+	      .e_machine = $e_machine,
+	      .num_to_name_len = ARRAY_SIZE(syscall_num_to_name_$e_machine),
+	      .sorted_names_len = ARRAY_SIZE(syscall_sorted_names_$e_machine),
+       },
+EOF
+}
+
+cat >> "$outfile" <<EOF
+static const struct syscalltbl syscalltbls[] = {
+#if defined(ALL_SYSCALLTBL) || defined(__alpha__)
+EOF
+build_outer_table EM_ALPHA "$outfile"
+cat >> "$outfile" <<EOF
+#endif // defined(ALL_SYSCALLTBL) || defined(__alpha__)
+
+#if defined(ALL_SYSCALLTBL) || defined(__arm__) || defined(__aarch64__)
+EOF
+build_outer_table EM_ARM "$outfile"
+build_outer_table EM_AARCH64 "$outfile"
+cat >> "$outfile" <<EOF
+#endif // defined(ALL_SYSCALLTBL) || defined(__arm__) || defined(__aarch64__)
+
+#if defined(ALL_SYSCALLTBL) || defined(__csky__)
+EOF
+build_outer_table EM_CSKY "$outfile"
+cat >> "$outfile" <<EOF
+#endif // defined(ALL_SYSCALLTBL) || defined(__csky__)
+
+#if defined(ALL_SYSCALLTBL) || defined(__mips__)
+EOF
+build_outer_table EM_MIPS "$outfile"
+cat >> "$outfile" <<EOF
+#endif // defined(ALL_SYSCALLTBL) || defined(__mips__)
+
+#if defined(ALL_SYSCALLTBL) || defined(__hppa__)
+EOF
+build_outer_table EM_PARISC "$outfile"
+cat >> "$outfile" <<EOF
+#endif // defined(ALL_SYSCALLTBL) || defined(__hppa__)
+
+#if defined(ALL_SYSCALLTBL) || defined(__powerpc__) || defined(__powerpc64__)
+EOF
+build_outer_table EM_PPC "$outfile"
+build_outer_table EM_PPC64 "$outfile"
+cat >> "$outfile" <<EOF
+#endif // defined(ALL_SYSCALLTBL) || defined(__powerpc__) || defined(__powerpc64__)
+
+#if defined(ALL_SYSCALLTBL) || defined(__riscv)
+EOF
+build_outer_table EM_RISCV "$outfile"
+cat >> "$outfile" <<EOF
+#endif // defined(ALL_SYSCALLTBL) || defined(__riscv)
+
+#if defined(ALL_SYSCALLTBL) || defined(__s390x__)
+EOF
+build_outer_table EM_S390 "$outfile"
+cat >> "$outfile" <<EOF
+#endif // defined(ALL_SYSCALLTBL) || defined(__s390x__)
+
+#if defined(ALL_SYSCALLTBL) || defined(__sh__)
+EOF
+build_outer_table EM_SH "$outfile"
+cat >> "$outfile" <<EOF
+#endif // defined(ALL_SYSCALLTBL) || defined(__sh__)
+
+#if defined(ALL_SYSCALLTBL) || defined(__sparc64__) || defined(__sparc__)
+EOF
+build_outer_table EM_SPARC "$outfile"
+cat >> "$outfile" <<EOF
+#endif // defined(ALL_SYSCALLTBL) || defined(__sparc64__) || defined(__sparc__)
+
+#if defined(ALL_SYSCALLTBL) || defined(__i386__) || defined(__x86_64__)
+EOF
+build_outer_table EM_386 "$outfile"
+build_outer_table EM_X86_64 "$outfile"
+cat >> "$outfile" <<EOF
+#endif // defined(ALL_SYSCALLTBL) || defined(__i386__) || defined(__x86_64__)
+
+#if defined(ALL_SYSCALLTBL) || defined(__xtensa__)
+EOF
+build_outer_table EM_XTENSA "$outfile"
+cat >> "$outfile" <<EOF
+#endif // defined(ALL_SYSCALLTBL) || defined(__xtensa__)
+EOF
+build_outer_table EM_NONE "$outfile"
+cat >> "$outfile" <<EOF
+};
+EOF
diff --git a/tools/perf/trace/beauty/timespec.c b/tools/perf/trace/beauty/timespec.c
new file mode 100644
index 000000000..b14ab72a2
--- /dev/null
+++ b/tools/perf/trace/beauty/timespec.c
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: LGPL-2.1
+// Copyright (C) 2022, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+
+#include "trace/beauty/beauty.h"
+#include <inttypes.h>
+#include <time.h>
+
+static size_t syscall_arg__scnprintf_augmented_timespec(struct syscall_arg *arg, char *bf, size_t size)
+{
+	struct timespec *ts = (struct timespec *)arg->augmented.args->value;
+
+	return scnprintf(bf, size, "{ .tv_sec: %" PRIu64 ", .tv_nsec: %" PRIu64 " }", ts->tv_sec, ts->tv_nsec);
+}
+
+size_t syscall_arg__scnprintf_timespec(char *bf, size_t size, struct syscall_arg *arg)
+{
+	if (arg->augmented.args)
+		return syscall_arg__scnprintf_augmented_timespec(arg, bf, size);
+
+	return scnprintf(bf, size, "%#lx", arg->val);
+}
diff --git a/tools/perf/trace/beauty/tracepoints/Build b/tools/perf/trace/beauty/tracepoints/Build
new file mode 100644
index 000000000..9924ad24a
--- /dev/null
+++ b/tools/perf/trace/beauty/tracepoints/Build
@@ -0,0 +1,23 @@
+perf-y += x86_irq_vectors.o
+perf-y += x86_msr.o
+
+beauty_outdir := $(OUTPUT)trace/beauty/generated
+beauty_arch_asm_dir := $(srctree)/tools/perf/trace/beauty/arch/x86/include/asm/
+x86_arch_asm_dir := $(srctree)/tools/arch/x86/include/asm/
+
+x86_arch_irq_vectors_array := $(beauty_outdir)/x86_arch_irq_vectors_array.c
+x86_arch_irq_vectors_tbl := $(srctree)/tools/perf/trace/beauty/tracepoints/x86_irq_vectors.sh
+
+$(x86_arch_irq_vectors_array): $(beauty_arch_asm_dir)/irq_vectors.h $(x86_arch_irq_vectors_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(x86_arch_irq_vectors_tbl)' $(beauty_arch_asm_dir) > $@
+
+x86_arch_MSRs_array := $(beauty_outdir)/x86_arch_MSRs_array.c
+x86_arch_MSRs_tbl := $(srctree)/tools/perf/trace/beauty/tracepoints/x86_msr.sh
+
+$(x86_arch_MSRs_array): $(x86_arch_asm_dir)/msr-index.h $(x86_arch_MSRs_tbl)
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,gen)$(SHELL) '$(x86_arch_MSRs_tbl)' $(x86_arch_asm_dir) > $@
+
+$(OUTPUT)trace/beauty/tracepoints/x86_irq_vectors.o: $(x86_arch_irq_vectors_array)
+$(OUTPUT)trace/beauty/tracepoints/x86_msr.o: $(x86_arch_MSRs_array)
diff --git a/tools/perf/trace/beauty/tracepoints/x86_irq_vectors.c b/tools/perf/trace/beauty/tracepoints/x86_irq_vectors.c
new file mode 100644
index 000000000..8eb9bc853
--- /dev/null
+++ b/tools/perf/trace/beauty/tracepoints/x86_irq_vectors.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: LGPL-2.1
+/*
+ * trace/beauty/x86_irq_vectors.c
+ *
+ *  Copyright (C) 2019, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+ */
+
+#include "trace/beauty/beauty.h"
+
+#include "trace/beauty/generated/x86_arch_irq_vectors_array.c"
+
+static DEFINE_STRARRAY(x86_irq_vectors, "_VECTOR");
+
+static size_t x86_irq_vectors__scnprintf(unsigned long vector, char *bf, size_t size, bool show_prefix)
+{
+	return strarray__scnprintf_suffix(&strarray__x86_irq_vectors, bf, size, "%#x", show_prefix, vector);
+}
+
+size_t syscall_arg__scnprintf_x86_irq_vectors(char *bf, size_t size, struct syscall_arg *arg)
+{
+	unsigned long vector = arg->val;
+
+	return x86_irq_vectors__scnprintf(vector, bf, size, arg->show_string_prefix);
+}
+
+bool syscall_arg__strtoul_x86_irq_vectors(char *bf, size_t size, struct syscall_arg *arg __maybe_unused, u64 *ret)
+{
+	return strarray__strtoul(&strarray__x86_irq_vectors, bf, size, ret);
+}
diff --git a/tools/perf/trace/beauty/tracepoints/x86_irq_vectors.sh b/tools/perf/trace/beauty/tracepoints/x86_irq_vectors.sh
new file mode 100755
index 000000000..d8e927dd2
--- /dev/null
+++ b/tools/perf/trace/beauty/tracepoints/x86_irq_vectors.sh
@@ -0,0 +1,27 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+# (C) 2019, Arnaldo Carvalho de Melo <acme@redhat.com>
+
+if [ $# -ne 1 ] ; then
+	beauty_arch_asm_dir=tools/perf/trace/beauty/arch/x86/include/asm/
+else
+	beauty_arch_asm_dir=$1
+fi
+
+x86_irq_vectors=${beauty_arch_asm_dir}/irq_vectors.h
+
+# FIRST_EXTERNAL_VECTOR is not that useful, find what is its number
+# and then replace whatever is using it and that is useful, which at
+# the time of writing of this script was: 0x20.
+
+first_external_regex='^#define[[:space:]]+FIRST_EXTERNAL_VECTOR[[:space:]]+(0x[[:xdigit:]]+)$'
+first_external_vector=$(grep -E ${first_external_regex} ${x86_irq_vectors} | sed -r "s/${first_external_regex}/\1/g")
+
+printf "static const char *x86_irq_vectors[] = {\n"
+regex='^#define[[:space:]]+([[:alnum:]_]+)_VECTOR[[:space:]]+(0x[[:xdigit:]]+)$'
+sed -r "s/FIRST_EXTERNAL_VECTOR/${first_external_vector}/g" ${x86_irq_vectors} | \
+grep -E ${regex} | \
+	sed -r "s/${regex}/\2 \1/g" | sort -n | \
+	xargs printf "\t[%s] = \"%s\",\n"
+printf "};\n\n"
+
diff --git a/tools/perf/trace/beauty/tracepoints/x86_msr.c b/tools/perf/trace/beauty/tracepoints/x86_msr.c
new file mode 100644
index 000000000..6b8f12957
--- /dev/null
+++ b/tools/perf/trace/beauty/tracepoints/x86_msr.c
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: LGPL-2.1
+/*
+ * trace/beauty/x86_msr.c
+ *
+ *  Copyright (C) 2019, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+ */
+
+#include "trace/beauty/beauty.h"
+
+#include "trace/beauty/generated/x86_arch_MSRs_array.c"
+
+static DEFINE_STRARRAY(x86_MSRs, "MSR_");
+static DEFINE_STRARRAY_OFFSET(x86_64_specific_MSRs, "MSR_", x86_64_specific_MSRs_offset);
+static DEFINE_STRARRAY_OFFSET(x86_AMD_V_KVM_MSRs, "MSR_", x86_AMD_V_KVM_MSRs_offset);
+
+static struct strarray *x86_MSRs_tables[] = {
+	&strarray__x86_MSRs,
+	&strarray__x86_64_specific_MSRs,
+	&strarray__x86_AMD_V_KVM_MSRs,
+};
+
+static DEFINE_STRARRAYS(x86_MSRs_tables);
+
+static size_t x86_MSR__scnprintf(unsigned long msr, char *bf, size_t size, bool show_prefix)
+{
+	return strarrays__scnprintf(&strarrays__x86_MSRs_tables, bf, size, "%#x", show_prefix, msr);
+}
+
+size_t syscall_arg__scnprintf_x86_MSR(char *bf, size_t size, struct syscall_arg *arg)
+{
+	unsigned long flags = arg->val;
+
+	return x86_MSR__scnprintf(flags, bf, size, arg->show_string_prefix);
+}
+
+bool syscall_arg__strtoul_x86_MSR(char *bf, size_t size, struct syscall_arg *arg __maybe_unused, u64 *ret)
+{
+	return strarrays__strtoul(&strarrays__x86_MSRs_tables, bf, size, ret);
+}
diff --git a/tools/perf/trace/beauty/tracepoints/x86_msr.sh b/tools/perf/trace/beauty/tracepoints/x86_msr.sh
new file mode 100755
index 000000000..fa3c4418e
--- /dev/null
+++ b/tools/perf/trace/beauty/tracepoints/x86_msr.sh
@@ -0,0 +1,40 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+if [ $# -ne 1 ] ; then
+	arch_x86_header_dir=tools/arch/x86/include/asm/
+else
+	arch_x86_header_dir=$1
+fi
+
+x86_msr_index=${arch_x86_header_dir}/msr-index.h
+
+# Support all later, with some hash table, for now chop off
+# Just the ones starting with 0x00000 so as to have a simple
+# array.
+
+printf "static const char * const x86_MSRs[] = {\n"
+regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+MSR_([[:alnum:]][[:alnum:]_]+)[[:space:]]+(0x00000[[:xdigit:]]+)[[:space:]]*.*'
+grep -E $regex ${x86_msr_index} | grep -E -v 'MSR_(ATOM|P[46]|IA32_(TSC_DEADLINE|UCODE_REV)|IDT_FCR4)' | \
+	sed -r "s/$regex/\2 \1/g" | sort -n | \
+	xargs printf "\t[%s] = \"%s\",\n"
+printf "};\n\n"
+
+# Remove MSR_K6_WHCR, clashes with MSR_LSTAR
+regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+MSR_([[:alnum:]][[:alnum:]_]+)[[:space:]]+(0xc0000[[:xdigit:]]+)[[:space:]]*.*'
+printf "#define x86_64_specific_MSRs_offset "
+grep -E $regex ${x86_msr_index} | sed -r "s/$regex/\2/g" | sort -n | head -1
+printf "static const char * const x86_64_specific_MSRs[] = {\n"
+grep -E $regex ${x86_msr_index} | \
+	sed -r "s/$regex/\2 \1/g" | grep -E -vw 'K6_WHCR' | sort -n | \
+	xargs printf "\t[%s - x86_64_specific_MSRs_offset] = \"%s\",\n"
+printf "};\n\n"
+
+regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+MSR_([[:alnum:]][[:alnum:]_]+)[[:space:]]+(0xc0010[[:xdigit:]]+)[[:space:]]*.*'
+printf "#define x86_AMD_V_KVM_MSRs_offset "
+grep -E $regex ${x86_msr_index} | sed -r "s/$regex/\2/g" | sort -n | head -1
+printf "static const char * const x86_AMD_V_KVM_MSRs[] = {\n"
+grep -E $regex ${x86_msr_index} | \
+	sed -r "s/$regex/\2 \1/g" | sort -n | \
+	xargs printf "\t[%s - x86_AMD_V_KVM_MSRs_offset] = \"%s\",\n"
+printf "};\n"
diff --git a/tools/perf/trace/beauty/usbdevfs_ioctl.sh b/tools/perf/trace/beauty/usbdevfs_ioctl.sh
new file mode 100755
index 000000000..12a30a9a8
--- /dev/null
+++ b/tools/perf/trace/beauty/usbdevfs_ioctl.sh
@@ -0,0 +1,22 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+[ $# -eq 1 ] && beauty_uapi_linux_dir=$1 || beauty_uapi_linux_dir=tools/perf/trace/beauty/include/uapi/linux/
+
+# also as:
+# #define USBDEVFS_CONNINFO_EX(len)  _IOC(_IOC_READ, 'U', 32, len)
+
+printf "static const char *usbdevfs_ioctl_cmds[] = {\n"
+regex="^#[[:space:]]*define[[:space:]]+USBDEVFS_(\w+)(\(\w+\))?[[:space:]]+_IO[CWR]{0,2}\([[:space:]]*(_IOC_\w+,[[:space:]]*)?'U'[[:space:]]*,[[:space:]]*([[:digit:]]+).*"
+grep -E "$regex" ${beauty_uapi_linux_dir}/usbdevice_fs.h | grep -E -v 'USBDEVFS_\w+32[[:space:]]' | \
+	sed -r "s/$regex/\4 \1/g"	| \
+	sort | xargs printf "\t[%s] = \"%s\",\n"
+printf "};\n\n"
+printf "#if 0\n"
+printf "static const char *usbdevfs_ioctl_32_cmds[] = {\n"
+regex="^#[[:space:]]*define[[:space:]]+USBDEVFS_(\w+)[[:space:]]+_IO[WR]{0,2}\([[:space:]]*'U'[[:space:]]*,[[:space:]]*([[:digit:]]+).*"
+grep -E $regex ${beauty_uapi_linux_dir}/usbdevice_fs.h | grep -E 'USBDEVFS_\w+32[[:space:]]' | \
+	sed -r "s/$regex/\2 \1/g"	| \
+	sort | xargs printf "\t[%s] = \"%s\",\n"
+printf "};\n"
+printf "#endif\n"
diff --git a/tools/perf/trace/beauty/vhost_virtio_ioctl.sh b/tools/perf/trace/beauty/vhost_virtio_ioctl.sh
new file mode 100755
index 000000000..e4f395e76
--- /dev/null
+++ b/tools/perf/trace/beauty/vhost_virtio_ioctl.sh
@@ -0,0 +1,18 @@
+#!/bin/sh
+# SPDX-License-Identifier: LGPL-2.1
+
+[ $# -eq 1 ] && beauty_uapi_linux_dir=$1 || beauty_uapi_linux_dir=tools/perf/trace/beauty/include/uapi/linux
+
+printf "static const char *vhost_virtio_ioctl_cmds[] = {\n"
+regex='^#[[:space:]]*define[[:space:]]+VHOST_(\w+)[[:space:]]+_IOW?\([[:space:]]*VHOST_VIRTIO[[:space:]]*,[[:space:]]*(0x[[:xdigit:]]+).*'
+grep -E $regex ${beauty_uapi_linux_dir}/vhost.h | \
+	sed -r "s/$regex/\2 \1/g"	| \
+	sort | xargs printf "\t[%s] = \"%s\",\n"
+printf "};\n"
+
+printf "static const char *vhost_virtio_ioctl_read_cmds[] = {\n"
+regex='^#[[:space:]]*define[[:space:]]+VHOST_(\w+)[[:space:]]+_IOW?R\([[:space:]]*VHOST_VIRTIO[[:space:]]*,[[:space:]]*(0x[[:xdigit:]]+).*'
+grep -E $regex ${beauty_uapi_linux_dir}/vhost.h | \
+	sed -r "s/$regex/\2 \1/g"	| \
+	sort | xargs printf "\t[%s] = \"%s\",\n"
+printf "};\n"
diff --git a/tools/perf/trace/beauty/waitid_options.c b/tools/perf/trace/beauty/waitid_options.c
new file mode 100644
index 000000000..78ead5df9
--- /dev/null
+++ b/tools/perf/trace/beauty/waitid_options.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: LGPL-2.1
+#include "trace/beauty/beauty.h"
+
+#include <sys/types.h>
+#include <sys/wait.h>
+
+size_t syscall_arg__scnprintf_waitid_options(char *bf, size_t size,
+					     struct syscall_arg *arg)
+{
+	bool show_prefix = arg->show_string_prefix;
+	const char *prefix = "W";
+	int printed = 0, options = arg->val;
+
+#define	P_OPTION(n) \
+	if (options & W##n) { \
+		printed += scnprintf(bf + printed, size - printed, "%s%s%s", printed ? "|" : "", show_prefix ? prefix : "",  #n); \
+		options &= ~W##n; \
+	}
+
+	P_OPTION(NOHANG);
+	P_OPTION(UNTRACED);
+	P_OPTION(CONTINUED);
+#undef P_OPTION
+
+	if (options)
+		printed += scnprintf(bf + printed, size - printed, "%s%#x", printed ? "|" : "", options);
+
+	return printed;
+}
diff --git a/tools/perf/trace/beauty/x86_arch_prctl.sh b/tools/perf/trace/beauty/x86_arch_prctl.sh
new file mode 100755
index 000000000..b714ffa3c
--- /dev/null
+++ b/tools/perf/trace/beauty/x86_arch_prctl.sh
@@ -0,0 +1,27 @@
+#!/bin/sh
+# Copyright (C) 2018, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+# SPDX-License-Identifier: LGPL-2.1
+
+[ $# -eq 1 ] && beauty_x86_arch_asm_uapi_dir=$1 || beauty_x86_arch_asm_uapi_dir=tools/perf/trace/beauty/arch/x86/include/uapi/asm/
+
+prctl_arch_header=${beauty_x86_arch_asm_uapi_dir}/prctl.h
+
+print_range () {
+	idx=$1
+	prefix=$2
+	first_entry=$3
+
+	printf "#define x86_arch_prctl_codes_%d_offset %s\n" $idx $first_entry
+	printf "static const char *x86_arch_prctl_codes_%d[] = {\n" $idx
+	regex=`printf '^[[:space:]]*#[[:space:]]*define[[:space:]]+ARCH_([[:alnum:]_]+)[[:space:]]+(%s[[:xdigit:]]+).*' ${prefix}`
+	fmt="\t[%#x - ${first_entry}]= \"%s\",\n"
+	grep -E -q $regex ${prctl_arch_header} && \
+	(grep -E $regex ${prctl_arch_header} | \
+		sed -r "s/$regex/\2 \1/g"	| \
+		xargs printf "$fmt")
+	printf "};\n\n"
+}
+
+print_range 1 0x1 0x1001
+print_range 2 0x2 0x2001
+print_range 3 0x4 0x4001
diff --git a/tools/perf/trace/strace/groups/file b/tools/perf/trace/strace/groups/file
new file mode 100644
index 000000000..722e25d20
--- /dev/null
+++ b/tools/perf/trace/strace/groups/file
@@ -0,0 +1,20 @@
+access
+chmod
+creat
+execve
+faccessat
+getcwd
+lstat
+mkdir
+open
+openat
+quotactl
+read
+readlink
+rename
+rmdir
+stat
+statfs
+symlink
+unlink
+write
diff --git a/tools/perf/trace/strace/groups/string b/tools/perf/trace/strace/groups/string
new file mode 100644
index 000000000..c87129a3e
--- /dev/null
+++ b/tools/perf/trace/strace/groups/string
@@ -0,0 +1,65 @@
+access
+acct
+add_key
+chdir
+chmod
+chown
+chroot
+creat
+delete_module
+execve
+execveat
+faccessat
+fchmodat
+fchownat
+fgetxattr
+finit_module
+fremovexattr
+fsetxattr
+futimesat
+getxattr
+inotify_add_watch
+lchown
+lgetxattr
+link
+linkat
+listxattr
+llistxattr
+lremovexattr
+lsetxattr
+lstat
+memfd_create
+mkdir
+mkdirat
+mknod
+mknodat
+mq_open
+mq_timedsend
+mq_unlink
+name_to_handle_at
+newfstatat
+open
+openat
+pivot_root
+pwrite64
+quotactl
+readlink
+readlinkat
+removexattr
+rename
+renameat
+renameat2
+request_key
+rmdir
+setxattr
+stat
+statfs
+statx
+swapoff
+swapon
+symlink
+symlinkat
+truncate
+unlink
+unlinkat
+utimensat