Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 121 insertions, 0 deletions

diff --git a/tools/perf/tests/Build b/tools/perf/tests/Build
new file mode 100644
index 000000000..66944a4f4
--- /dev/null
+++ b/tools/perf/tests/Build
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: GPL-2.0
+
+perf-test-y += builtin-test.o
+perf-test-y += tests-scripts.o
+perf-test-y += parse-events.o
+perf-test-y += uncore-event-sorting.o
+perf-test-y += dso-data.o
+perf-test-y += vmlinux-kallsyms.o
+perf-test-y += openat-syscall.o
+perf-test-y += openat-syscall-all-cpus.o
+perf-test-$(CONFIG_LIBTRACEEVENT) += openat-syscall-tp-fields.o
+perf-test-y += mmap-basic.o
+perf-test-y += perf-record.o
+perf-test-y += evsel-roundtrip-name.o
+perf-test-$(CONFIG_LIBTRACEEVENT) += evsel-tp-sched.o
+perf-test-y += fdarray.o
+perf-test-y += pmu.o
+perf-test-y += pmu-events.o
+perf-test-y += hists_common.o
+perf-test-y += hists_link.o
+perf-test-y += hists_filter.o
+perf-test-y += hists_output.o
+perf-test-y += hists_cumulate.o
+perf-test-y += bp_signal.o
+perf-test-y += bp_signal_overflow.o
+perf-test-y += bp_account.o
+perf-test-y += wp.o
+perf-test-y += task-exit.o
+perf-test-y += sw-clock.o
+perf-test-y += mmap-thread-lookup.o
+perf-test-y += thread-maps-share.o
+perf-test-$(CONFIG_LIBTRACEEVENT) += switch-tracking.o
+perf-test-y += keep-tracking.o
+perf-test-y += code-reading.o
+perf-test-y += sample-parsing.o
+perf-test-y += parse-no-sample-id-all.o
+perf-test-y += kmod-path.o
+perf-test-y += thread-map.o
+perf-test-y += topology.o
+perf-test-y += mem.o
+perf-test-y += cpumap.o
+perf-test-y += stat.o
+perf-test-y += event_update.o
+perf-test-y += event-times.o
+perf-test-y += expr.o
+perf-test-y += backward-ring-buffer.o
+perf-test-y += sdt.o
+perf-test-y += is_printable_array.o
+perf-test-y += bitmap.o
+perf-test-y += perf-hooks.o
+perf-test-y += unit_number__scnprintf.o
+perf-test-y += mem2node.o
+perf-test-y += maps.o
+perf-test-y += time-utils-test.o
+perf-test-y += genelf.o
+perf-test-y += api-io.o
+perf-test-y += demangle-java-test.o
+perf-test-y += demangle-ocaml-test.o
+perf-test-y += demangle-rust-v0-test.o
+perf-test-y += pfm.o
+perf-test-y += parse-metric.o
+perf-test-y += pe-file-parsing.o
+perf-test-y += expand-cgroup.o
+perf-test-y += perf-time-to-tsc.o
+perf-test-y += dlfilter-test.o
+perf-test-y += sigtrap.o
+perf-test-y += event_groups.o
+perf-test-y += symbols.o
+perf-test-y += util.o
+perf-test-y += hwmon_pmu.o
+perf-test-y += tool_pmu.o
+perf-test-y += subcmd-help.o
+perf-test-y += kallsyms-split.o
+
+ifeq ($(SRCARCH),$(filter $(SRCARCH),x86 arm arm64 powerpc))
+perf-test-$(CONFIG_DWARF_UNWIND) += dwarf-unwind.o
+endif
+
+CFLAGS_dwarf-unwind.o += -fno-optimize-sibling-calls
+
+perf-test-y += workloads/
+
+ifdef SHELLCHECK
+  SHELL_TESTS := $(shell find tests/shell -executable -type f -name '*.sh')
+  SHELL_TEST_LOGS := $(SHELL_TESTS:tests/shell/%=shell/%.shellcheck_log)
+else
+  SHELL_TESTS :=
+  SHELL_TEST_LOGS :=
+endif
+
+$(OUTPUT)%.shellcheck_log: %
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,test)$(SHELLCHECK) "$<" > $@ || (cat $@ && rm $@ && false)
+
+perf-test-y += $(SHELL_TEST_LOGS)
+
+ifdef MYPY
+  PY_TESTS := $(shell find tests/shell -type f -name '*.py')
+  MYPY_TEST_LOGS := $(PY_TESTS:tests/shell/%=shell/%.mypy_log)
+else
+  MYPY_TEST_LOGS :=
+endif
+
+$(OUTPUT)%.mypy_log: %
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,test)mypy "$<" > $@ || (cat $@ && rm $@ && false)
+
+perf-test-y += $(MYPY_TEST_LOGS)
+
+ifdef PYLINT
+  PY_TESTS := $(shell find tests/shell -type f -name '*.py')
+  PYLINT_TEST_LOGS := $(PY_TESTS:tests/shell/%=shell/%.pylint_log)
+else
+  PYLINT_TEST_LOGS :=
+endif
+
+$(OUTPUT)%.pylint_log: %
+	$(call rule_mkdir)
+	$(Q)$(call echo-cmd,test)pylint "$<" > $@ || (cat $@ && rm $@ && false)
+
+perf-test-y += $(PYLINT_TEST_LOGS)